14 best misting umbrellas

Product description

What's difference in your mist cooling kit?

Nozzle can be blocked very easily because the water hole is very very small. We try to solve this so we adds a accessory in this kit.

Comes with US standard hose connector, avoid leakage from faucet.

Use as both a irrigation system and a fan cooling system.

Two non-porous nozzle included, so you can change the cooling area or stop one of the nozzles without split the system.

Even the installation is very easy, but we also provide a "step by step" user manual.



What's important before installation?

We have to make sure that nozzle won't be blocked by dirts, so, your first step will be to flush out the system. To do this, connect the hose adapter to culinary water using a standard garden hose or outdoor faucet and turn on the water to flush out any dirt or debris from within the mist line. When the line is clear of debris, turn off the water and screw the nozzles into the fittings. When all of your nozzles are in place, turn the water on and inspect the line pressure as well as each fitting.



Package contains:

1/4 hose 20ft*1

Brass misting nozzle*7

Misting tee*7

Tee connector*1

1/4" quick connector*1

1/2 inch&3/4 inch faucet adapter*1

Non-porous nozzle*2

Water valve*1

Thread seal tape*1

Hose clamps with masonary nail*15

Zip tie*15

Clip*6

End plug for misting tee*1

• New installation upgrade: MIXC cooling system has been updated all fittings that can be installed without any effort, even for children.
• Hight quality and easy to maintain: Brass misting nozzles that will not get rusty. We solved every problem you may suffer from other cooling kits, include nozzle clogged.
• Multi-purpose and convenient: This mist cooling system can be used as outdoor cooling systerm for fan, umbrella, patio, pergola, vestibule, animals, or use as garden irrigation kit.
• Easy to install：Our mist cooling system has everything inneed, you can assemble them easily on the umbrella,fan or pergola, then connect to the water-tap and enjoy your cool summer time.
• Saving water : Adjustable water output.It needs only up to 3L/nozzle per hour, each nozzle can cool 3 square feet.

User questions & answers

Question:	Can I buy more misters
Answer:	Contact MIXC Customer Service
Question:	Does this contain an end plug to prevent the water from leaking out the end of the hose
Answer:	Not a plug specific to that purpose but you can use one of the sprinkler plugs and close the red lid tight. That being said, I have this system set up in my back yard and I’m realizing the 1/4” tube is probably way too small for the distance I need. The water pressure keeps popping the little red capped sprinkler attachments off at the first few offshoots and then the water never makes it far past that point when it does. I’ll be looking into wider diameter tubes for the distance and using the 1/4” tube only for short distance distribution from the wider hose.
Question:	Does the filter come apart to clean it
Answer:	I could not get it apart with my hands but I did not try using a tool but it looks like it will come apart. But put that aside because this is the best you’re going to get for the price. I purchased this and I put it on an existing fan and then I spent $120 on a new fan that had the misting system already on it and this one blew away the $120 one.
Question:	Does this connect to a water hose
Answer:	It connects to a water faucet on the side of a house. Leave the faucet valve on and let the timer determine when to water the plants after programming the timer.

Product features

26.2FT mist cooling kit

The 26.2ft Portable Preassembled Mist Cooling Kit provides relief from the heat wherever you need it. This preassembled kit provides 12 inches of mist cooling and cools the surrounding air temperatures by up to 20° F. Creating 16’ of linear mist cooling ( 21 square feet of mist area).

For outdoor use with cold water only. Do not use product with a booster pump. Do not use in freezing temperatures.

For Animal Shelters

Create an animal environment protected from extreme heat. Mist systems employed in animal facilities reduce temperatures and protect animals from rising temperatures.

For Patio and Pergola

When enjoying a lazy Sunday brunch in a beautiful outdoor setting, how we all wish a breeze would pass by to comfort us, but on a hot day can get tiring for your guests. Misting system is designed to effectively create a cooling effect in the outdoors.

For Garden and Greenhouse

A reliable method for watering the plants in outdoor and greenhouse, ensure that they are healthly and perfect when the season is ready.

For Dust Suppression

When billions of tiny droplets are sprayed from the misting system, they fall on the ground, attracting and trapping dust particles in the air. This helps clear fugitive dust, giving you a healthy workplace with a cleaner air.

• 【Strong durability】-Outdoor misters for patio uses US Standard faucet joint and precision misting nozzle ,connect by high quality tubing,so no need to worry about leaking.Resistant to hydrolysis and resistant to microbial degradation.
• 【Easy to install】-Quick plug connector can be installed quickly ,without tools ,which can be used repeatedly. The 10 meter long water pipe is equipped with 10 nozzles and a pipe cutter, which can be the freely DIY customized the length you want.
• 【 Energy Conservation & Save Water 】- Patio water mister directly use tap water to spray and cool down, the atomization is fully uniform, the spray covers a wide area.No electricity consumption, and saves energy,and very environmental .
• 【Wide Application】-Garden mister system is suitable for courtyard cooling,greenhouse cooling, lawn humidification,swimming pool misting fog cooling,Trampoline water park and so on .Increasing air humidity, reducing temperature and reducing floating particles in the air.
• 【Misting System Set】- 1*1/4''PE Misting Line (10M) ,10 * 3-way Tee Connector,10 *Quick insertion nozzle,20 *Water pipe buckle,20* Hookahs buckle,1*Large metal joint,1 *Plug,1* Teflon tape .The fantastic cool mister outdoor provides a cool environment from the heat for your favorite outdoor areas.

User questions & answers

Question:	How do the nozzles fit on the hose
Answer:	You cut the hose and just insert it into the the 2 ports on either side of the actual mister head. It simple. This system by the way works wonderfully! Better than I expected, produces a great mist like those professional installed at outside patio eatery’s! Amazing price and product.
Question:	Can I get additional tubing
Answer:	It looks like it is just the same tubing you use for drip lines in yard irrigation, so you can probably get additional tubing at a hone improvement store.
Question:	What is the Teflon tape used for, I don’t understand your diagram
Answer:	It goes around your faucet so when you attach the mister there is no leaks
Question:	For patio cooling how far apart should the mist nozzles be
Answer:	We did 3ft apart and it seems to be perfect .

Product features

Bearbro is a professional good helper in watering your garden.

Premium Quality: Metal joints, better than brass, durable PU misting tubing provide a quality experience.

Easy to use, No special tools are required, Equipped with a strainer and soft rubber stopper to prevent leakage no need for tape or sealant.

Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist.

How to use

1. Fix the misting system in the right position. The mist head is directed towards the direction you want to mist.

2. Connect the misting system connector to the garden hose (remember to install a silicone seal ring to prevent leaking).

3. Open the garden water pipe valve and start enjoying your misting system to cool down.

4. Shut down your garden pipe valve when you don't need it.

• 【Lengthen Plug-in & Cleanable Mist Nozzles】Stainless steel plug-in mist nozzle easy to install and pull out and makes mist nozzle more firmly when spraying. The mist nozzle can be completely disassembled easy to clean the dirty when it is blocked by impurities.
• 【Anti-locking buckle Connector Design】The connector has a snap-on design, Pressing the blue o-ring to put in the hose and Pull outward the hose to make the connection firm and it won't leak due to excessive water pressure.
• 【Cool Down the Heat for you】 The SdeNow outdoor cooling system provides a cool environment from the heat for your outdoor activities, cooling and humidifier function bring you a cool summer and a more healthy life.
• 【Easy to install & Energy conservation】Completely assembled system Installs not more than 10 minutes. Misting cooling system delivers mist to cool the air in the hottest summer weather directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you.
• 【Widely used scenarios】Misting Cooling System widely apply for garden, greenhouse, Fan cooling, landscaping, humidification, outdoor cooling system, Trampoline water park, Swimming pool misting fog cooling, epidemic prevention, spraying disinfectant, deodorant air purification, Mist mosquito and so on

Product features

Outdoor cooling system

Garden & Fan cooling

Landscaping& Humidification

Trampoline water park

Anti-locking buckle Connector Design

• Caliber fits for 1/4'' garden hose
• Anti-locking make connection firm
• All accessories is good sealing, no leak, easy to connect.

Lengthen Plug-in & Cleanable Mist Nozzles

• Nozzle Lengthen design makes mist nozzle more firmly when spraying.
• Every nozzle is detachable and cleanable.

US Standard 3/4" Brass Adapter( female US NH threaded 3/4")

It can be connected to-----

• The male 3/4" threaded faucet.
• Common male 3/4" threaded timer
• The 3/4" garden paito splitter

Cool Down the Heat for you

• Atomizing spray effect cool down the heat for you.
• Widely apply for garden, greenhouse, Fan cooling, outdoor cooling system, Trampoline water park and so on.

Installation Steps

The misting cooling system is easy to install and widely using, The design of 50ft(15m) portable preassembled Mist Cooling System can help you beat the high temperatures, cool off the outdoor area and spray for the plants.

Package Included: 1 x 32.8FT misting line, 1 x waterproof belt, 1 x manual, 1 x G3/4 inch Female Thread Connector, 6 x Pull belt, 6 x Stainless steel plug-in mist nozzle, 6 x T-type tees & 1x L-shaped rotors & 1 x straight-through

Important Tips:

1.To prevent water leakage, please make sure to cut the pipe smoothly (Avoid oblique cutting) and put the hose to button of the blue O-ring and Pull outward the hose to make the connection firm.

2. If the water volume of the nozzle is reduced after a period of use, Please pay attention to clean the nozzle and every nozzle is detachable and cleanable.

Product description

Enjoy a Fun Summer

This trampoline water sprinkler sprays mist water into the trampoline which can reduce the

temperature on the trampoline, Let the kids play freely in the courtyard and spend the

cool summer. And when you lie on the hammock on the balcony, the fine mist falls on

you, bringing you coolness. Perfect water activities for kids and adults.



DIY Your Own Summer Cooling System

This US standard misting cooling system can be used as outdoor cooling systerm for fan,

umbrella, patio, pergola, vestibule, animals, or use as garden irrigation kit. Especially suitable

for the trampoline, you will enjoy another fun way.



Cut the Length you want

49.21 Feet water pipe with 15 tee fittings and a pipe cutter, which can be more freely

customized the length and angle you want. For example, when used in a trampoline, you can

cut the length of the pipe to the length from the tap to the trampoline, so it won’t get

wet where you don’t want to get wet.



Easy to install

All the accessories you need has been provided, your idea about your own cooling system can be realized within ten minutes.



1. Cut the length you need.

2. Insert the water tap connector and pipe to the I-joint.

3. Insert cutted pipes to T-joints.

4. Insert the end plug to the last T- joint.



PS. If you want to disconnect the pipe from T-joint, please one hand press the blue part of the T-joint, the other hand pull out the pipe.



Saving Energy and Water

Misting cooling system directly use tap water to spray and cool down, no electricity

consumption.Compare with manual watering on irrigation you can save 70% of

water.Comparing with air humidification machine it works faster and more efficient.



Package



1 x 49.21ft Pipe

1 x Water Tap Connector

15 x T-joint

1 x I-joint (for connecting Tap Connector and Pipe)

• 【DIY Your Own Cooling System】This US standard misting cooling system can be used as outdoor cooling systerm for patio, fan, umbrella, porch, pergola, vestibule, animals, or use as garden irrigation kit. Cools the surrounding air temperatures up to 20℃ or 68℉.
• 【Cut the Length You Want and Easy to Install】50 Feet water tube with 15 tee fittings and a tube cutter, which can be more freely customized the length and angle you want. All the accessories you need has been provided, your idea about your own cooling system can be realized within ten minutes.
• 【Tap Connector with filter Screen and More Durable Tube】The filter screen removes dust, sediment and debris, reducing the possibility of nozzle clogging and extending the service life. We have also upgrated tube's material. The PE engineering material looks like glass fiber, and its compression resistance and durability are better than ordinary PE materials! The service life of the tube is twice that of others‘ tubes.
• 【Mist Watering Cover More Area】Watering by misting can cover a more large area than traditional watering, increasing humidity effectively and reducing dust particles, giving a uniform water volume for plant watering in garden, vegetable land, landscaping, greenhouse, giving a continuous misting water for cleaning in livestock farm.
• 【Saving Energy and Water】Misting cooling system directly use tap water to spray and cool down, no electricity consumption. Compared with manual watering, it can save 70% of water. Compared with air humidifiers, it works faster and more efficiently.

User questions & answers

Question:	Is there a tap connector with filter screen in this patio mister system
Answer:	Yes, it can effectively prevent the nozzle from being blocked.
Question:	How do I install this patio misting system
Answer:	Cut the pipe by cutter and then insert pipe into 3/4'' Tap connector and T-jonit. The misting system is very easy to install.
Question:	Do I need to punch a hole in the tubing before putting on the mist connectors
Answer:	you need to cut the tubing in half and then push the connectors in very simple
Question:	Can the misting system be attached to a fan
Answer:	Yes, that's what I bought for. Put a fan behind the sprayers. Do NOT put the sprayer behind the fan.

Product features

Cooling the Heat, decrease about 50℉ in temperature

The misting system produce water mist, which absorb the heat from the outdoor surrounding in hot summer, and provides a cooling outdoor areas, cools the surrounding air temperatures 10℃ to 20℃ or 50℉ to 68℉.

Tap Connector with filter Screen

The filter screen removes dust, sediment and debris, reducing the possibility of nozzle clogging and extending the service life.And good sealing, no leakage.

Mist Watering Cover More Area

Watering by misting can cover a more large area than traditional watering, increasing humidity effectively and reducing dust particles.

More Durable PE Engineering Material

The PE engineering material looks like glass fiber, and its compression resistance and durability are better than ordinary PE materials! The service life of the tube is twice that of others' tubes.

Easy to install, It only takes you ten minutes

Easy to install

1. Cut out the length you need.

2. Insert pipe to the tap connector.

3. Insert cutted pipes to T-joints.

4. Insert the end plug to the last I- joint.

If you want to disconnect the pipe from T-joint, please one hand press the blue part of the T-joint, the other hand pull out the pipe.

Product description

About the GLANT:

After 10 years of scientific research and development,GLANT have become an advanced manufacturer of outdoor products.we focus on the garden products developing and selling,providing the new and qualified products.We are devoted to build a one-stop garden accessories shop.



About the GLANT Misting Cooling System:

a.High precision brass misting nozzle keypunch are made of brass with good quality, they are anti-rust, durable and have a long lifetime

b,Easy to use, No special tools are required, each nozzle with leak-proof, self-sealing O-ring; no need for tape or sealant

c,Brass misting nozzle is the built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle



Multi Function: Great for agriculture, lawn, garden, patio, greenhouse ,swimming pool misting fog cooling/irrigation, watering, greenhouse, humidification, balcony cooling, irrigation (watering flowers, grass, vegetables).



How it work:

Assemble the connector to the faucet

Turn on the faucet until the misting system working

The nozzles have attached into the tube, it is easy to install your cooling system



Package included:

1x8M Misting line

1xBrass Faucet Connector

11xBrass mist nozzles(Included 2 spare nozzles)

• UPGRADE HIGH QUALITY: Use of precision brass misting nozzle keypunch, sophisticated production,made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to yellowing,resistant to hydrolysis, resistant to microbial degradation
• MULTI FUNCTION: Great for agriculture, lawn, garden, patio, greenhouse ,swimming pool misting fog cooling/irrigation, watering, greenhouse, humidification, balcony cooling, irrigation (watering flowers, grass, vegetables).
• EASY TO INSTALL:Mist cooling Kit completely assembled system Installs in less than 10 minutes, delivers very fine mist to significantly cool the air in the hottest summer weather, mist and save for conditioner
• COOLING&SAVE ENERGY: Quickly cool the surrounding air temperatures to below 20 degrees.Misting cooling system directly use tap water to spray and cool down.Compare with manual watering on irrigation you can save 70% of water.Comparing with air humidification machine it works faster and more efficient
• LIFETIME WARRANTY. We provide 100% satisfaction guarantee for lifetime for our misting system. If you have any questions, feel free to contact us. Our enthusiastic customer service will always here for help. May you have a happy shopping experience

User questions & answers

Question:	Can it fit any hose? We are having a hard time getting it on... and if it’s on a little bit it just squirts not sprays
Answer:	I have the OCP camo pattern, and in that one no, however one end has velcro, so it can be moved against the side of the wall.
Question:	What is the thread size on the misters
Answer:	No. This hasn’t been a problem at all just use handle on side to roll it.
Question:	What is the spacing between misters
Answer:	No it doesn’t look like dark green. It’s clearly a dark grey.
Question:	Does this come assembled? It looks like the fittings are already installed on the line
Answer:	No, it does not meet carry-on size requirements so cannot be placed in overhead bin. I've used it on 2 out of country trips and it works great. Lightweight and durable. I love the outside pockets for storing small items. When I pack it full, it weighs only about 38 lbs.

• HIIRALIY Misting cooling system directly use tap water to spray, cools the surrounding air temperatures up to 20 degrees,before cutting tube, we recommend you run water thru the tubing.
• 65.6ft mister hose made of 8mm (OD) X 5mm (ID) PU recyclable materials which ensures durable, UV resistant and long life use time. Note: Please put the connected part of the hose into the hot water for 10 seconds before assembling
• DIY misting system provided 3/4 inch metal threaded connector ensures to prevent leaking from the begin for good sealing and no-leaking
• Mist cooling kit provide all the accessories you need for you to easily assemble air cooling and plant misting system in ten minutes
• Mist watering kit widely used for patio garden, lawn, trampoline water park, landscaping, greenhouse, humidification, outdoor cooling system, swimming pool misting fog cooling

User questions & answers

Question:	Can it be attached to a fan
Answer:	It says 5th gen on the box. I received this item and it is as stated the 5th generation. Also the timer included. Compare to mistking’s website.
Question:	Does it come with clips to secure misters
Answer:	Hi, it can silently run 1 nozzle or as many as 10 nozzles for misting. So depending on the area you wanna cover. One can easily cover a regular sized patio. If you have very huge patio you should try for ultimate version.
Question:	Can i put it on a ac unit
Answer:	The pump can be mounted above the reservoir.
Question:	how will this not get crowds of people wet
Answer:	Yes! The programmable timer allows up to 12 misting periods throughout the day. For a 4x2x2, 10 sec/4 hours is good enough for 75% humidity.

Product features

PU Misting Tube & High-Quality Mist Nozzles

Durable PU Black Tubing

-The tubing included is made from PU recyclable materials, durable, UV-resistance and long life usetime.

-Ours is bigger size(8mm outside diameter, 5mm inside diameter) than others( 6x4mm or 7x4mm).

-Thicker tubing ensures strong water prresure.

High Quality Mister Nozzles

--Made of recyclable plastic materail.

-6mm outlet ensures non-blocked.

-Misting thin cools the surrounding air temperatures to 20℉ up.

• ★ 2020 Upgrade High Quality : Water mister use of precision brass misting nozzle ,made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to yellowing,resistant to hydrolysis, resistant to microbial degradation
• ★ Turn Down the Heat : The fantastic water misters for cooling outdoor provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees
• ★ Turn Down the Heat : The fantastic water misters for cooling outdoor provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees
• ★ Easy to install : Mist cooling Kit completely assembled system Installs in less than 10 minutes, delivers very fine mist to significantly cool the air in the hottest summer weather, mist and save for conditioner
• ★ Wide Application: Outdoor Mister System widely apply for patio umbrella trampoline sprinkler outdoor water toys and trmapoline games garden, landscaping, greenhouse irragation, humidification, RV Mister , deodorant air purification, swimming pool misting fog cooling and so on

User questions & answers

Question:	Do these spay intermittently
Answer:	No, this misting system is Connected to the tap water, the misting is continuous
Question:	Can you take the 59 foot tubing and 24 misters and cut the tubing and make it 30 feet and use all 24 misters? Is this possible
Answer:	Yes , If you think the distance between nozzles is too long, you can remove the PU tubing between nozzle and cut it short (listing page and disassembly diagram are shown on the product manual). It's all very simple yet stylish and hopefully H&G Lifestyles misting System will bring you a cool summer day
Question:	Does the product contain a water pump
Answer:	No pump was included (or needed) in the setup. One end of the tube attaches to the garden faucet with standard adaptor. The denseness of the mist depends on your water pressure or how much you open the faucet.
Question:	Can I buy another brass adapter? Mine didnt come with the adapter
Answer:	Sorry,We don't sell adapters separately.If the shipment is short of adapters, please email me the order number，, and we will contact you to deal with it. Thanks!

Product features

Durable Construction

H&G lifestyles misting system are made from some of the best materials out there, including PU Tubing, brass and high-grade ABS Plastic. The PU tubing has good elasticity to preventing kinks and twists . Brass nozzles misting is thinner, longer service life, 3/4" brass adapter for all standard garden hoses, good leakproof.

Easy To Remove And Install Tee Nozzle

Simple Push in Design for Connecting to the Tube and Provide Secure Connection, Requires No Extra Sealing.

Low Pressure

H&G lifestyles misting system for patio can achieve good misters effect by using tap water pressure(about 45 PSI), without the need for booster pump. This means you can save more on peak summer electricity bills, be a better cleaner-environmentalist.

Quality Promise

Our misting system is built to last thanks to durable design and high quality materials. However, should you stumble upon manufacturing defects, take advantage of H&G lifestyles' assurance promise to restore your misters to a pristine condition .

H&G lifestyles misting system Benefits:

Whether watering your plants in greenhouse, or giving your family a cooling misting on a hot summer day, the H&G lifestyles misters is durability and dependability you can rely on. Each misting system is made from high-quality PU materials and features brass fittings, to ensure a leak-free misting process.

Flexible

Durable

Easy to use

3/4" brass adapter for all standard garden hoses, Can DIY to 25', 50', 75' or 100' lengths

Resistant to extreme temperatures

patio umbrellas

Trampoline

Greenhouse

Chicken coop

• 【Effective Cooling】Cools the surrounding area up to 20 degrees. Let your family, your pets and flowers spend a cooling summer.
• 【Customizable Shape】Freestanding and pliable, so you can manipulate it to fit a variety of different shapes and heights. you can let the hose stand on the floor or entwine the hose around patios, lounge chairs, desks, and more.
• 【Portable】Flexible mist stand can be used anywhere there is outdoor hose faucet.
• 【High-quality Brass Nozzle】The nozzle material is made of high-quality brass, which is not easy to corrode, strong and durable, and can be used repeatedly.
• 【Wide Range of Use】The hose can be in your garden, patio, Umbrella,swimming pool, be used with fan, and can also be used for washing and playing with your pet.

User questions & answers

Question:	How much water does the mister stand use
Answer:	Hello! Our Timberland Men's 35mm Classic Jean Belt is made from a single cut of top-grain leather, with no bonding, filling or backing. We pride ourselves on providing the highest quality of leather for our customers.
Question:	I just got this and was wondering how you connect it to your hose? seems like something is missing
Answer:	Just the body. So far a great bag.
Question:	how tall is it
Answer:	We purchased this for my son as a boot camp present. I wouldn’t recommend, the first time he used it the seams have started to split..so highly unlikely it’s waterproof

• PORTABLE OUTDOOR MISTING SYSTEM: ExtremeMist Complete Quad kit comes with a 16ft. mist line and 4 nickel / brass mist nozzles that can create a continuous cloud of fine mist, cooling the air around you up to 30°
• WIRELESS REMOTE CONTROL: Powered by ExtremeMist’s Blue Pump Technology. Comes with an 8 speed wireless remote control for variable mist density. Complete temperature control from up to 30+ feet away.
• RECHARGEABLE BATTERY & POWER BANK: PCS pump / battery can be fully charged from any outlet in approximately 3hrs and can also be used as a power bank to power other devices, (android, tablet, etc..) System comes with one USB charger.
• ATTACHES TO ANYTHING: Portable system sets up in just a few minutes! Connect feed hose to any clean water source, such as a water jug, pail, water bottle, cooler or any type of container. Attaches to canopies, umbrellas, awnings, dog strollers, sport vehicles & Golf Carts

User questions & answers

Question:	Can you connect it to a power source to run indefinitely?Or does it need to solely run off of battery power, taking breaks to charge the battery
Answer:	Looks like it
Question:	How much water does it hold
Answer:	This product is not hypoallergenic.
Question:	What is it's power source? If battery powered how long will it run per charge
Answer:	Not a leather expert but appears to me to be a solid thick piece of leather, not 2 pieces glued together. Very solid, I'm very satisfied thus far.

• 【HIGH QUALITY】:Misting system, 10m blank distribution tubing is made of high quality UV resistant ABS to resist microbial degradation/hydrolysis.The high quality brass misting nozzles for outdoor cooling system is corrosion resistant and has a life expectancy of 2.5 times that of similar nozzles.
• 【WATERPROOF FAUCET CONNECTOR】:This misting kit is equipped with 3/4" connector and universal connector for all standard outdoor faucets. And the matching sealing tape makes the joint more tightly connected with the faucet, which can effectively prevent water leakage.
• 【ENJOY THE SUMMER OUTDOORS】:The outdoor misting cooling system uses tap water directly without consuming electricity, which is environmentally friendly and energy-saving, providing a cool and clean environment.
• 【SIMPLE INSTALLATION】:Pathonor misting system is fully equipped and can be assembled in 10 minutes without other tools. misting cooling system ideal for garden, lawn, water park, landscaping, cooling and moisturizing.
• 【PRODUCT WARRANTY】: Our misting system is 10m/32.8ft and is checked every shipment. If there is a wrong length or other situations, please contact us in time, we will give you a refund or reissue.(12 Months Warranty Provided)

User questions & answers

Question:	Is the tubing 4/7" as it says in description? Or is it 1/4" or 3/8"? The hose adapter leaks and I'd like to purchase quality brass replacemen pieces
Answer:	Yes !!! That's what I bought it for !!! The whole shop comes outside to our work area to cool off now . Most excellent 20 dollars ever spent . Get this model with adjustable nozzles and quick disconnect. https://www.amazon.com/dp/B07C3LM9Q1?ref=ppx_pop_mob_ap_share
Question:	the nozzles are shooting a stream of water not a spray
Answer:	We offered 10 PCS nylon cable ties for 32.8ft misting system to secure misters. And 65.6ft mist system have 20 PCS nylon cable ties, instead of clips.
Question:	Is it easy to install
Answer:	I have it on my AC unit. I manually turn it on when the temperature gets above 93. You need to add a lot of zip ties. Each attachment to what port needs to be zip tied or they pop off.
Question:	what size are the misting nozzles
Answer:	I guess it depends on the water pressure but mine don’t blow out past 3 ft maybe.

Product features

About PATHONOR Misting Cooling System:

a.Brass misting nozzle is the built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle

b. easy to use, no special tools, each nozzle has a leak-proof, self-sealing O-ring.

Q1: What is the material of the nozzle?

High-precision brass nozzle made of brass, good quality, rust-proof, durable, long service life

Q2: Will it leaking?

All parts of the atomization system are well sealed, leak free and durable.

Q3:What is the long service life?

The high quality brass atomizing nozzle is corrosion resistant and has a life expectancy of 2.5 times that of similar nozzles.

PACKAGE INCLUDE:

1 x 10m/32.8ft Blank Distribution Tubing

1 x Universal Faucet Connector

1 x 3/4" tap

1 x Hose Quick Connector

1 x Sealing Tape

1 x Single End Closure

10 x Teflon Cable Tie

10 x Fixed Clip

10 x T-connector

12 x Brass Atomizing Nozzle

UNIVERSAL ADAPTER

PATHONOR offers 3 adapters :

1.3/4" threaded outdoor faucet.

2. Universal connection faucet.

3. Ordinary brand timer (universal connector)

Product description

Misting Cooling System

Camp Solutions Misting cooling system giving your family a cooling misting on a hot summer day, wide range of use for trampoline sprinkler garden, greenhouse, patio fan, umbrellas misters, and the misters is durability and dependability you can rely on. Each misting system is made from high-quality PE materials and features brass fittings, to ensure a leak-free misting process.

Package Included:

- 1 × 50 ft Misting Tube

- 1 × Hose with Standard Water Tap Adaptor

- 15 x Brass with Stainless Nozzles

- 15 x Mist Fittings

- 20 × Cable ties

- 20 × Saddle Clamps

- 1 x End Plug

- 1 x Scissor

Features:

- 🍀 CREATING A NATURAL COOLING AREA

- 🍀 EASY TO REMOVE AND INSTALL

- 🍀 WIDE RANGE OF USE

- 🍀 PREMIUM PRODUCT QUALITY

- 🍀 DIY AS YOUR IDEAL

-🍀🍀Warm Tips: Determine the distance between each head in order to achieve a good misting effect. After the assembly is completed, water test shall be conducted to ensure that all parts work normally

• 【CREATING A NATURAL COOLING AREA】 The water misters provide a cooling outdoor areas from the hot, dry autumn, it cools the surrounding air temperatures up to 20 degrees, let you enjoy your summer outside under this misting system.
• 【EASY TO INSTALL】 Mist cooling system kit including all the accessories you need, can be assembled within 10 minutes as your idea for patio mist system or mist fans, delivers very fine mist to significantly cool the air in the hottest summer weather
• 【WIDE RANGE OF USE】 Outdoor mister system widely apply for greenhouse irragation humidification, patio umbrella /fan cooling mister, trampoline sprinkler outdoor water toys, swimming pool misting fog cooling, vegetable land, plant, garden watering, animal cage for outdoor water playing, reducing dust particles, RV mister and so on
• 【PREMIUM PRODUCT QUALITY】 Exclusive brass misting nozzles, good sealing tubing connector, flexible and UV-resistant black PU tubing made the misting cooling system no leaking, no blocking, no rusting and longlife use. Determine the distance between each head in order to achieve a good misting effect(recommended distance 30-40ft)
• 【100% SATISFACTION GUARANTEE】 If you experience any issue please reach out to us, We will get back to you and make things right. Enjoy peace of mind with our 180 days replacement and MONEY BACK GUARANTEE. Click 'Add to Cart' now!

Product description

Misting nozzles are made of metal with good quality, they are anti-rust, durable. Misting Nozzles using in Misting Cooling System apply for garden, greenhouse, Fan cooling, landscaping, humidification, outdoor cooling system, etc.



Package Included:

1 x manual

1 x waterproof belt

1 x G3/4 inch Female Thread Connector

10 x Pull belt

10 x Stainless steel plug-in mist nozzle

10 x T-type tees & 2 x L-shaped rotors & 1 x straight-through

Important Tips:

1. Attention that Misting nozzles match with 1/4-Inch Orifice Hose, 1/4-Inch Hose NOT INCLUDED

2.To prevent water leakage, please make sure to cut the pipe smoothly (Avoid oblique cutting) and put the hose to button of the blue O-ring and Pull outward the hose to make the connection firm.

3. If the water volume of the nozzle is reduced after a period of use, Please pay attention to clean the nozzle and every nozzle is detachable and cleanable.

• 【Suit Package】Package included 1 x waterproof belt, 1 x manual, 1 x G3/4 inch Female Thread Connector, 10 x Pull belt, 10 x Stainless steel plug-in mist nozzle, 10 x T-type tees & 2 x L-shaped rotors & 1 x straight-through, Match 1/4-Inch Orifice Hose(Not included),Meet all the needs of your link suite.
• 【High quality Material】Misting nozzles are made of metal with good quality, they are anti-rust, durable and give you a wonderful shopping experience.
• 【Lengthen Plug-in & Cleanable Mist Nozzles】Stainless steel plug-in mist nozzle easy to install and pull out and makes mist nozzle more firmly when spraying. The mist nozzle can be completely disassembled easy to clean the dirty when it is blocked by impurities.
• 【Anti-locking buckle Connector Design】The connector has a snap-on design, Pressing the blue o-ring to put in the hose and Pull outward the hose to make the connection firm and it won't leak due to excessive water pressure.
• 【Widely used scenarios】Misting Nozzles using in Misting Cooling System apply for garden, greenhouse, Fan cooling, landscaping, humidification, outdoor cooling system, Trampoline water park, Swimming pool misting fog cooling, epidemic prevention, spraying disinfectant, etc.

Product description

The Orbit 30060 Arizona Outdoor Misting System Basic Cooling Set is 10-feet of pre-assembled, ready-to-use, flexible misting line to help cool surrounding air temperature up to 20 degrees Fahrenheit.

• Great for cooling your outdoor living areas
• 10-feet of mist cooling coverage
• Installs in less than 10 minutes
• cools the surrounding air temperatures up to 20 degrees
• 4 year warranty

User questions & answers

Question:	Has anyone used this to mist a moss garden
Answer:	No I have not. I do have a moss garden and let it go dormant. It would work if your water is not so overly chlorinated I would think. How is your moss garden doing?
Question:	How much water does this consume? I didn't see any gph rating to estimate required feed capacity but maybe I missed it. Thanks
Answer:	About 1/2 gallon per nozzle per hour. But it also depends on water pressure. I ran it all summer 10 hours a day and didn't notice it on the bill.
Question:	Can you connect this to another obit system to get more misting nozzles
Answer:	I don't think so; I connected two of the 3/8 inch systems for use on my rabbit hutches, and those state that you can connect them. The 1/4" does not. I gave the 1/4" system to a friend, so don't have it to look at. Sorry. I did get some questions answered last year by going to the Orbit web site and reading some of their stuff.
Question:	Can someone explain why the box states that the item has a "Cancer Warning
Answer:	If it didn't, they couldn't sell it in California. Pretty much everything has the warning.

Product features

10 inch Portable Preassembled Misting Kit

The 10 inch Portable Preassembled Mist Cooling Kit provides relief from the heat wherever you need it. This preassembled kit provides 10 inches of mist cooling and cools the surrounding air temperatures by up to 20° F.

Simply attach the convenient alligator clips to an umbrella, awning, fence or other structure and then connect to a standard garden hose to immediately experience the benefit of mist cooling.

Product description

Professional Brand: HOMENOTE is a brand company which has a 6-years research and development in Misting System,and produced series of misting system kits and accessories to meets US users demand. Premium Quality: HOMENOTE provides exclusive brass nozzles, durable PU misting tubing, good sealing and US standard connectors, and give a long lifetime Pre-assembled: Easy to use, No special tools are required, each nozzle with leak-proof, self-sealing O-ring; no need for tape or sealant

• 【Premium Product Quality】: Galvanized solid brass hose/faucet connecting adapter, flexible and UV-resistant black PU tubing, exclusive brass misting nozzles, good sealing tubing connector,all these premium composition accessories are used to made the misting cooling system, and no leaking, no blocking, no rusting and longlife use
• 【Cooling the Heat】: The misting system produce water mist, which absorb the heat from the outdoor surrounding in hot summer, and provides a cooling outdoor areas, cools the surrounding air temperatures up to 20℃ or 68℉
• 【Misting Watering Manything】: Watering by misting can caover a more large area than traditional watering, increasing humidity effectively and reducing dust particles, giving a uniform water volume for plant watering in garden, vegetable land,landscaping,greenhouse, giving a continuous misting water for cleaning in livestock farm
• 【Outdoor Water Playing】: The soft mist can be used in trampoline water park,umbrella,shade sail,swimming pool/animal cage for outdoor water playing,not only funny but also cooling. Best water playing in outdoor party/crowd.
• 【Energy conservation and environmental protection】: Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist

User questions & answers

Question:	can i trim it
Answer:	Yep. Easy as can be to shorten, or lengthen( as long as you have an additional bundle of 1/4” irrigation tubing which is available On Amazon)
Question:	What is the size of the nozzle and which is the best size for the perfect cooling mist
Answer:	I'm not sure of your sizing question however I can tell you this drops the temperature on my porch 10 to 20 degrees depending on the breeze moving the mist. I'm assuming the mister size is pretty efficient and effective
Question:	Is there an user manual
Answer:	Yes, with instruction in package
Question:	how long is the lead line from the faucet
Answer:	It's about 10 ft to the first mist nozzle, however that can be extended to whatever you want by using a garden hose

Product features

Cooling the Heat,decrease about 10℃ in temperature

The misting system produce water mist, which absorb the heat from the outdoor surrounding in hot summer, and provides a cooling outdoor areas, cools the surrounding air temperatures up to 20℃ or 68℉.

Misting Watering & Outdoor Water Playing:

Watering by misting can cover a more large area than traditional watering, increasing humidity effectively and reducing dust particles, giving a uniform water volume for plant watering in garden, vegetable land,landscaping,greenhouse, giving a continuous misting water for cleaning in livestock farm.

The soft mist can be used in trampoline water park, umbrella,shade sail, swimming pool/animal cage for outdoor water playing, not only funny but also cooling. Best water playing in outdoor party/crowd.

Upgrade Exclusive Brass Misting Nozzles

Upgrade Exclusive brass nozzle is the built-in stainless steel wafer through advanced forging process, strong durability, not block, anti-rust, is 2.5 times the life of similar nozzles.

Excellent misting effect. ( Water pressure: 0.2-0.3 MPA, Mist range: 20-40inch/nozzle. )

US Standard 3/4" Solid Brass Adapter

Galvanized solid brass construction, matte surface, good sealing & no leaking

Flexible and UV-resistant black PU tubing

UV-resistant, recyclable materials, thicker & bigger water flow

Can the tubing length be adjusted?

Yes,it can be, you just need to pull out the tubing from the misting nozzle, then lengthen/shorten the tubing, and re-install.

Lengthen: Customers can buy 1/4" tubing to make a longer mist line.

Shorten: Customers can cut the tubing between the misters to shorten the mist line.

Pre-assembled and easy to use

The misting system kit is pre-assembled, so you just connect it to faucet, then use.

Widely matching for garden connector, outdoor faucet, hose splitter, garden filter, garden timer.

Tubing Length Setting：

1.The tubing length between faucet adapter and the first mister is 6.6FT (2m)

2.Then 20pcs misters are pre-assembled spacing 2.76FT (0.84m),the length between the first mister to the last mister is 52.5FT(16m) .

3.Includes 6pcs additional replacement brass nozzles + 2pcs replacement T-connector.