11 best submersible waterfall pumps

Product description

Welcome to Pond Boss we specialize in the latest innovative & energy efficient water gardening products to help you create, maintain & enhance your own backyard pond, waterfall, or fountain feature. We take pride in providing you with durable, Eco-Friendly equipment including our low-water shut-off pumps, UV filtration systems, Non-toxic water treatments, pond liners, accessories & so much more. We have been providing water garden products for over 10 years therefore, our experienced customer service department is always ready to assist you in building & maintaining your water garden or backyard pond

• Waterfall pump; Anti-Clog Technology
• Energy Efficient
• Quiet Operation
• Easy Assembly
• Flow rate of 2300 GPH at Zero foot lift

User questions & answers

Question:	What is the thread size for the outlet connection
Answer:	We actually had to use an adapter and some silicone from the hardware store. Totally worth it though, because it was about half as much as the brand that I usually buy when I need a replacement. (This has happened three times in the past twenty years.) Anyone with minor plumbing skills should be able to figure it out.
Question:	How many watts is the pump
Answer:	Hi Mandy,The PW2300 has a maximum wattage of 130 Watts.Steve BrunkPractical Garden Ponds484-356-5351
Question:	is this pump submersable
Answer:	Yes Nice pump
Question:	How long is the cord
Answer:	I think about 16`ft, plenty of power

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter, and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 3100 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 8"L x 5"W x 6"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 3100
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 8"L x 5" W x 6"H for use in ponds up to 33' wide

User questions & answers

Question:	I have a 13ft x 2 ft circular fountain and am looking to run tubing through a water feature up 6 ft with a bell fountain head - would this work
Answer:	I use this pump to circulate water from a bottom pond (2000 gallons) to a top pond (900 gallons) for a waterfall. The water is pushed through 30 feet of 1.5 inch tubing up an incline of 5 feet. This pump circulates our water volume very well.
Question:	Does this have a threaded intake to allow connection of solid PVC pipe
Answer:	hello....I am presently far away from the pump (Az) in Europe and will not return back to Az before the end of August...sorry! Yet, I seem to recall that it did not have a threaded intake and I hooked it up to the PVC pipe with a short flex and clamps....hope it helps! I believe you meant "outtake" and not "intake" since the "intake" (where it "takes" the water in) is located underneath the pump itself, no hose, no pipe?
Question:	CAN YOU USE ONE INCH TUBING
Answer:	You can use any size tubing with the proper adapters however one must remember that using a small diameter tubing will increase the resistance and turbulence through the tube thus greatly reducing its flow capacity (its a logarithmic function). These types of pumps can handle high resistance on the output side however not at the input end so hopefully you are only referring to choking down the output and are willing to sacrifice the huge drop in flow as a result (note: expect a large pressure increase, similar to putting your thumb over the end of a water hose).
Question:	I'm confused. it's listed as a 3100gph but on the website it says maximum flow rate of 1100gph. which is it
Answer:	Hi Steve, the gph of any pump depends on the head pressure working against it. The Cyclone PAL3100 pumps 3100 gph at zero head. It pumps 2,251 gph at 5' of head, 1390 at 10' of head and 479 gph at 15' of head (according to the manufacturers literature). Head is roughly calculated by adding three things together, 1' of head for every foot of height from the surface of the pond to the highest point that the water will be pumped (if you could measure it straight up), another 1' of head for every 10' of tubing length, and another 1' for every sharp turn or obstacle like a UV unit or a 90 degree elbow). Sincerely, Nate at Practical Garden Ponds 484 356 5351 P.S. The reason there is sometimes conflicting information on Amazon is because multiple vendors share the same description and most of us don't have access to changing the information.

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter, and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 5200 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 10"L x 6"W x 7"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 5200
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10"L x 6"W x 7"H for use in ponds up to 33' wide

User questions & answers

Question:	I am looking at powering this with solar panels. Can anyone provide the power requirement for either the 3100 or 5200 at 10' head pressure
Answer:	I'm assuming you have an inverter? Pump will draw 426 watts. Head pressure at 10' will drop the GPH to 3,125 GPH.
Question:	Can anyone attest to durability, energy efficiency, or warranty? Looking at this v Aquascape, which was recommended, but this one is much less
Answer:	I've have been using cycle pumps for over a year now and have had very good service from them in our pond I wouldn't hesitate to recommend them, the only problem I've had was the filter cage will not stay attached to the pump body I attached it to the body with some screws. Power efficiency is exceptional and the 33ft cord is a plus when using the pump in a 50ft pond.
Question:	I am wondering about the tube fitting, I am looking for a 2" male end to be able to attach my tubing to the pump
Answer:	Was the fitting 1.5 or 2in , I’m hoping 1.5 , pls let me know before I purchase
Question:	What is the energy consumption for Alpine 5200gph pump
Answer:	The maximum power usage for the PAL5200 is 426 Watts.

Product description

TotalPond waterfall pumps have high performance, wet bearing motors capable of moving large amounts of water to create dynamic effects. These powerful motors are energy efficient and are designed for quiet performance so you can enjoy the sounds of flowing water, not the buzz of the motor. All of our waterfall pumps include a pumpshield to protect it from dirt and debris, which will also extend the life of the pump. The 1200 GPH Waterfall Pump is ideal for cascading waters up to 5 ft. in height. It has a maximum pumping height of 14 ft and comes with a 16 ft. power cord. Compatible with 1 inch id tubing

• The 1200 GPH Waterfall Pump is ideal for small waterfalls up to 5 ft. tall.
• With a maximum pumping height of 14 ft. at 0 GPH, this energy-efficient pump helps power a waterfall.
• All TotalPond Waterfall Pumps have a back-spitting feature to cool the pump.
• The internal design of the pump allows larger debris to flow out of the discharge and finer particles to flow out of the rear of the pump. This ensures that the shafts and bearings are being continuously cleaned.
• Includes a mesh barrier pumpshield prevent debris from clogging the pump.

User questions & answers

Question:	will l this work with a 500 gallon pond and waterfall
Answer:	This is a good pump for a small pond, my pond is maybe 700-800 gallons. The big thing is the lift or how high is your waterfall is. My waterfall is about 4 feet high and this size pump will run it well along with a bubbler made out of a 1/2" pipe in another part of the pond and it rises about 8" above the water surface. Good luck
Question:	Will pipe connection work with PVC threads
Answer:	when I got mine, I had to go to Home Depot and buy a PVC pipe and connector to work in my pond but I am not sure about a threaded PVC set-up---hope this helps
Question:	what filter should I buy to go with this? my pond is about 200 gallons and will have fish and plants at some point
Answer:	I bought this filter for a 1500 gallon pond with a waterfall with a 2 ft head and it pumps too fast and noisily. I think you might look at pump recommendations for a smaller pond. Nancy
Question:	Can you purchase various fountain heads to give it different looks
Answer:	Not sure - I'm using it in a pond to send water through a filter so not really using it for a waterfall....

Product features

Performance Improvement

Utilizes premium ceramic shafts and bearings for maximum efficiency and durability. Includes back-spitting feature to cool the pump.

Designed to Pass Larger Debris

The internal design of the pump allows larger debris to flow out of the discharge and finer particles to flow out of the rear of the pump. This ensures that the shafts and bearings are being continuously cleaned.

Easy Maintenance

Allows simple and quick access to all moving parts. No tools necessary.

Connection

For best results, we recommend using the largest tubing size recommended in the product specifications for reduced friction and maximum flow.

Tips

Product description

This Beckett Pond Waterfall Pump is ideal for big waterfalls. This waterfall reaches a maximum lift of 222 inches and has different stream settings that pump a maximum of 4700 gallons per hour. Auto-shutoff keeps pump and its surrounds safe in the event of a low water level. Great for indoor water structures that have a changing water level. Pond pumps circulate and aerate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast variety of flora. The black, plastic casing forms a hardy piece of equipment. The pump operates oil free, eliminating the risk of water contamination. Energy efficient pump means you can move more water through your water feature while using less power.

• SUBMERSIBLE WATERFALL POND PUMP: Enhance your water feature with his device. Large, high efficiency pump produces more flow using less power.
• OUTDOOR USE: Ideal for large waterfalls. Max height of fountain is 18. 5'. Pumps water at adjustable rate, up to 4700 GPH.
• AUTO SHUTOFF: This safety feature allows for the device to shut off if water levels get too low. Great for featureswith a varying amount of water.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 3/4", 1", or 2" tubing.
• LOW MAINTENANCE: Simply clean filter by disconnecting from pump and rinsing with clean water.

User questions & answers

Question:	How many amps does this pump draw
Answer:	Thanks for your question. This pump pulls .9 amps. It's 115 V and is 180 watts. If you need more help you can call Pond & Garden Depot toll free at 1-866-305-5459 Cody H. Customer Service
Question:	Are they designed and made in the USA
Answer:	This is USA design, but the manufacturing is in our factory in China.
Question:	How long is the cord
Answer:	Thanks for your question. The cord on this pump is 15 feet long. If you need more help you can call Pond & Garden Depot toll free at 1-866-305-5459 Cody H. Customer Service
Question:	Where do you get a fitting so it can connect to flexible 1 1/2" line? And why doesn't it come with a graduated adapter
Answer:	Mary, I am a customer also and love these Becket pumps. You are not using a small purpose pump when you buy one with size of volume water movement. None of them come with adaptors. I would suggest you take your pump and a sample of your flexible line to the hardware store, Home Depot and Menards has good selection in my town, and find pumping parts that work. Don't forget the clamps so it doesn't come apart after it has been put together. I plumbed my whole pond - 4 pumps, 2 skimmers, 4 filtration systems, 19000 gallons and you just have to go thru the process if you don't hire a plumber. But it isn't too hard - they have clerks that will help if it is out of your element.

Product description

Specification:

• Cord length: 16 feet
• Horsepower: 5/6 HP
• Voltage: 120V
• Amps: 6.3
• Wattage: 673 watts
• Dimensions: 11 x 6.35 x 8.1 inches
• Weight: 14.68 pounds
• Product warranty: 3-year warranty

With a unique dual-discharge design, this pump allows for operation of 2 water features simultaneously. It can be used in ponds, waterfalls, and streams with up to 2,400 gallons of water and a maximum pumping height of 29 feet. It must be plugged into a proper 120-Volt outlet in order to keep your water moving. It is ideal for use in waterfall and stream applications,

This pump is extremely versatile, able to be used vertically or horizontally. Powerful direct-drive pump produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps. Corrosion resistant body designed for non potable submersible use. 1-1/4-inch female pipe thread discharge, 1-1/4-inch barbed adaptor discharge. Maximum pumping height of 29-feet. 3 year warranty. For up to 2400 gallons. 673 watts. 16-feet cord.

• POND WATER PUMP: A pump is the heartbeat of your waterfall or stream, and this Little Giant 3500 GPH 673-Watt Dual Discharge Waterfall Pump is the perfect heart for water feature.
• STREAM PUMP: The powerful, direct-drive pump produces mind-blowing starting torque and flow pressure than comparable magnetic drive submersible pumps. Corrosion-resistant body designed for non-potable submersible use.
• DUAL DISCHARGE PUMP: With a unique dual-discharge design, this pump allows for operation of 2 water features simultaneously. It can be used in ponds, waterfalls, and streams with up to 2,400 gallons of water and a maximum pumping height of 29 feet.
• VERSATILITY: It is extremely versatile and able to be used vertically or horizontally. It is efficient, oil-less and safe for use in your pond.
• WATERFALL PUMP WARRANTY: It must be plugged into a proper 120-Volt outlet in order to keep your water moving. It has 3500 GPH capacity, 1-1/4-Inch female pipe thread discharge; 1-1/4-inch barbed adaptor discharge. It provides 3-year warranty.

User questions & answers

Question:	This pump is great but a small stream of water is shooting out the body. Looks like a pin hole size. Doesn't seem normal. Any experience with this
Answer:	There are just the two main outlets so I would think that any pin hole leak is a defect. I just use mine to circulate water in a large pond so I probably wouldn't notice. In other words I'm no help but if your using yours to pump water to another location it would cause a pressure loss problem.
Question:	so is this only for indoor use
Answer:	It's an underwater pump, so if your water feature is indoors, then yes.
Question:	I bought this pump along with 1 1/4" smooth bore tubing. The 90 degree adapter that is included is too large for the tubing. Is there another adapter
Answer:	You will have to get an adapter from your local hardware store.
Question:	What happens if pond runs out of water? Does the pump burn
Answer:	THese pumps spin by creating a magnetic field so its not mechanical and if the pond goes dry the pump will not burn out. They are very dependable and I have many years of steady performance. That said, they do fail and I had one go bad within a 10 year period of seasonal use (April-Nov)

Product description

Little Giant Direct Drive Waterfall Pump With 16 Foot Cord 4280gph Ideal for use in waterfall and stream applications, this powerful direct-drive pump features a unique dual-discharge design for operation of two water features simultaneously. This pump is extremely versatile, able to be used vertically or horizontally. Produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps. Corrosion-resistant body designed for non-potable submersible use. Includes two 1-1/4" MNPT x 1-1/4" barbed elbow adaptor and a 1-1/4" MNPT discharge cap. Maximum pumping height of 30'. 1-1/4" barbed adaptor accepts 1-1/4" tubing. 3 year warranty.

• Little Giant Direct Drive Waterfall Pump With 16 Foot Cord 4280gph Ideal for use in waterfall and stream applications, this powerful direct-drive pump features a unique dual-discharge design for operation of two water features simultaneously
• This pump is extremely versatile, able to be used vertically or horizontally
• Produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps
• Dual discharge waterfall pump
• 4280 GPH capacity
• 1-1/4-Inch female pipe thread discharge; 1-1/4-inch barbed adaptor discharge
• Maximum pumping height of 30-feet; 700 watts; 16-feet cord
• 3 Year warranty, for up to 2400 gallons

User questions & answers

Question:	Electrical requirements
Answer:	110 v grounded receptacle (3prong plug on unit). And a great workhorse
Question:	Will this support a 3500gal pond with 5’ waterfall
Answer:	I used for 2,000 gallon pond with 5 waterfalls on 2 foot high wall. I feel 3500 would be a stretch.
Question:	what is the cord length
Answer:	The cord length was about 7ft. for my purposes I cut it down
Question:	how many gph
Answer:	The item description shows "4300 GPH" which means 4300 gallons per hour, but it can depend on how high, how far or pipe size. With further searching one can find a graph to show decreased gph based on increased height of pipe through which pump must deliver water to feature: spout(s), waterfall, spillway, etc. But at at a height of one foot and 10 feet of length with at least a pipe inside diameter of 1.25 inches the pump will provide over 70 gallons per minute. That's more than a gallon per second. ....that's a whole lot of water. An in-line control valve on the high pressure side of the pump may be needed to reduce flow. This pump can suck water in so fast that there has to be plenty of supply of water to it, so there can be no obstruction to provide the needed volume of water, but the supply still needs to be screened/filtered somewhat. Just saying

Product description

"The BURCAM 300910 submersible waterfall and fountain pump is designed for use in residential applications with high flow. The stainless steel motor housing and thermoplastic body are corrosion-resistant. The pump has a water-cooled 1/2HP, 115V continuous duty motor that includes automatic thermal and overload protection and is safe for aquatic life. It comes with a large suction strainer, has a 2” NPT discharge and can be used in either a vertical or horizontal position. The maximum head is 25 feet and the capacity is up to 4950 US GPH.Die Burcam 300910 Tauchpumpe für Wasserfall und Brunnen ist für den Einsatz in Wohnanwendungen mit hohem Durchfluss konzipiert. Das Edelstahl-Motorgehäuse und der Thermoplastkörper sind korrosionsbeständig. Die Pumpe verfügt über einen wassergekühlten 1/2 PS, 115 V Dauerbetriebsmotor, der einen automatischen thermischen und Überlastschutz beinhaltet und für Wasserlebewesen sicher ist. Es kommt mit einem großen Saugsieb, hat eine 5,1 cm NPT-Entladung und kann entweder in einer vertikalen oder horizontalen Position verwendet werden. Der maximale Kopf beträgt 7,6 m und die Kapazität beträgt bis zu 4950 US GPH.משאבת מפל ומזרקה BURCAM 300910 מיועדת לשימוש ביישומי מגורים עם זרימה גבוהה. גוף המנוע מפלדת אל-חלד וגוף תרמופלסטי עמידים בפני קורוזיה. למשאבה יש מנוע 1/2HP, 115V מקורר מים רציף הכולל הגנה תרמית ועומס יתר אוטומטית ובטוחה לחיי מים. הוא מגיע עם מסננת יניקה גדולה, יש פריקת NPT 5 ס"מ וניתן להשתמש בו במצב אנכי או אופקי. הראש המקסימלי הוא 7.6 מטר והקיבולת היא עד 4950 ארה"ב GPH.تم تصميم مضخة شلال المياه الغاطسة 300910 من بوركام للاستخدام في التطبيقات السكنية ذات التدفق العالي. هيكل المحرك المصنوع من الستانلس ستيل وهيكل البلاستيك الحراري مقاوم للتآكل. تحتوي المضخة على محرك مستمر 1/2 حصان مبرد بالماء 115 فولت يتضمن حماية تلقائية من الحرارة والحمل الزائد وهي آمنة للحياة المائية. تأتي مع مصفاة شفط كبيرة، ولها تفريغ NPT 2 بوصة ويمكن استخدامها إما في وضع رأسي أو أفقي. الحد الأقصى للرأس هو 25 قدم وسعة تصل إلى 4950 US GPH.A bomba submersível de cachoeira e fonte BURCAM 300910 e projetada para uso em aplicações residenciais com alto fluxo. O invólucro do motor de aço inoxidável e o corpo termoplástico so resistentes à corroso. A bomba tem um motor contínuo de 1/2 HP resfriado a água, 115 V que inclui proteço termica e contra sobrecarga automática e e seguro para a vida aquática. Ele vem com um grande coador de sucço, tem uma descarga NPT de 5 cm e pode ser usado em posiço vertical ou horizontal. A cabeça máxima e de 7,6 m e a capacidade e de ate 4950 GPH dos EUA.BurCAM 300910 水下瀑布和喷泉泵专为高流量的住宅应用 不锈钢电机外壳和热塑性主体具有耐腐蚀性 水冷式 1/2 马力,115 伏连续载电机,自动热和过载保护,对水生生物安全 附带一个大型吸滤器,2英寸(约5.1厘米)NPT放电,可垂直或水平使用 最大头部为 25 英尺,容量高达 4950 US GPHBURCAM 300910 潛水式瀑布和噴泉泵專為高流量的住宅用途而設計 不鏽鋼馬達外殼和熱塑性機身耐腐蝕 水泵有水冷式 1/2HP、115V 連續工作馬達,包括自動熱力和過載保護,對水生生活安全 隨附一個大型吸力濾網,有 2 吋 NPT 放電,可垂直或水平使用 最大頭部為 25 英尺(約 7.6 公尺),容量高達 4950 美國 GPHBURCAM 300910 수중 폭포 및 분수 펌프는 유량이 많은 주거용 응용 분야에 사용하도록 설계되었습니다. 스테인리스 스틸 모터 하우징과 열가소성 바디는 부식 방지 기능이 있습니다. 이 펌프는 수냉식 1/2HP, 115V 연속 듀티 모터가 있어 자동 열 및 과부하 보호 기능을 제공하며 수중 생활에 안전합니다. 대형 흡입 거름망과 함께 제공되며 5.1cm(2인치) NPT 방전이 있으며 수직 또는 수평 위치에서 사용할 수 있습니다. 최대 헤드는 7.6 m (25 피트)이며 용량은 최대 4950 미국 GPH입니다."

• Designed for a portable application and a maximum lift of 20 feet for waterfall and fountain application
• 1/2 HP, 115 volts, water cooled continuous duty motor
• Can be used horizontal or vertical position
• 2 inch discharge, high flow capacity up to 4950 us gph
• Pump body made of non-corrosive Stainless Steel
• Pumping capacity up to 4950 gallons per hour
• Maximum vertical lift of 25 feet

User questions & answers

Question:	what is the wattage is it 200 400 600 etc
Answer:	Standard sized bedroom, approximately 200 Sq ft. I use low wattage bulbs because it is an additional light source. Works well!
Question:	how long is the power cord on this unit?? i am looking for something 75ft or so
Answer:	Even though the Sea Gull Lighting Sebring 1 Light Outdoor Ceiling Lantern 8869-12 can probably be used without the glass globe, this is an outdoor damp rated fixture, so the globe should be used to help protect the bulb and bulb socket from the elements and moisture.
Question:	What is the size of the pump? In the upright position it looks like side discharge is thy hat correct
Answer:	Home depot

Product description

This Beckett Pond Waterfall Pump is ideal for big waterfalls. This waterfall reaches a maximum lift of 154 inches and has different stream settings that pump a maximum of 800 gallons per hour. Can also be used in fountains and container gardens. Great for indoor or outdoor water structures that have a changing water level. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast vaierty of flora. The black, plastic casing forms a hardy piece of equiptment. The pump operates oil free, eliminating the risk of water contamination. Energy effecient pump means you can move more water through your water feature while using less power.

• SUBMERSIBLE WATERFALL POND PUMP: Enhance your water feature with his device. High efficiency pump produces more flow using less power.
• OUTDOOR USE: Ideal for small waterfalls. Max height of fountain is 12.9'. Pumps water at adjustable rate, up to 800 GPH. Great for waterfalls 1'H by 1'W.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 1" tubing.
• LOW MAINTENANCE: Simply clean filter by disconnecting from pump and rinsing with clean water.
• INCLUDED: 29/32 hp water pump, 2 prefilters and power cord. Limited manufacturer's warranty.

User questions & answers

Question:	Can this pump flow to 2 8" spillways at the same time
Answer:	Yes,and it does too.
Question:	what is the electrical cord length in feet? Thank you
Answer:	15ft
Question:	This says it is adjustable, but I cannot find info on how to adjust the flow level. How do I change that to give me the desired effect
Answer:	The pump output has a thumb tab that can be turned about 90 degrees to adjust water output.
Question:	Would this be suitable for a bathtub size fish pond
Answer:	Yes , it work good for the bathtub size . I have one about that size and it works wonderful

Product description

The Aquascape 90 GPH Water Pump is ideal for use with smaller decorative fountains, ornamental spitters, and other indoor and outdoor water features. This high quality, magnetically driven water pump combines energy-efficient performance with impressive flow-rates (up to 90 gallons per hour) and simple maintenance -- making it the statuary pump of choice for discriminating water feature owners. Its oil-free design prevents pond contamination, while the wide flat base makes it stable and easy to place during setup. The durable pre-filter cage design is set on the bottom of the pump, which prevents clogging and reduces pump maintenance to provide years of trouble-free operation. The included flow-control valve allows you to customize the flow-rate of your feature. The Aquascape Water Pump 90 measures 2-1/2 x 1-3/4 x 2 inches, has a 3-inch maximum head height, includes a 6-foot power cord, and is backed by a 3-year limited warranty. Aquascape is passionate about the products we produce, providing unique products, designs, and features that stand above the competition.

• Ideal for use with small indoor and outdoor water features; pumps up to 90 gallons per hour (GPH)
• Energy-efficient magnetically driven motor is also simple to maintain
• Durable pre-filter cage design prevents clogging and reduces pump maintenance
• Wide, flat base adds stability; oil-free design prevents pond contamination
• Measures 2-1/2 x 1-3/4 x 2 inches; 6-foot power cord; 3-year limited warranty

User questions & answers

Question:	Can you thread pvc into outlet if so what size? If not can you slip pvc onto it? If slip what size
Answer:	The bottom of the case is black
Question:	I bought this pump on October 2 2018 and it just stopped working. How do I get the warranty to replace it
Answer:	60 Watt typical screw in bulbs
Question:	Chart states max head height is 4 (feet) yet the product disc. states "Pump 180 measures 3 x 2-1/2 x 2 inches, has a 4-inch maximum head height
Answer:	Its a whole light
Question:	whats the water temp range this pump can handle
Answer:	Yes the seam is very visible. To change the bulbs you have to hold the glass in place while you unscrew the post... it can be tricky if you are up high on a latter.

Product features

Statuary & Fountain Water Pumps

These high quality, mag-drive (magnetically-driven) water pumps are ideal for supplying water to run fountains, water features, external filters, and spitting ornaments.

This combination of energy efficiency, mag-drive performance, water flow, and ease of maintenance makes this pump the ideal choice for discriminating water feature owners.

Why Choose Aquascape?

Aquascape is not like any other manufacturer of water feature products in the world. We are passionate about the products we produce, because we enjoy living with them ourselves.

Aquascape focuses on an ecosystem approach to water features that relies on the most natural balance of circulation, filtration, plants, fish, and rocks and gravel to ensure sustainability.

With a complete line of water feature products, Aquascape offers unique and innovative designs and features that have been created to expand the enjoyment, improve the performance and reduce the cost of owning a water feature. Discover why Aquascape has been the proven choice of professional contractors, homeowners and water feature enthusiasts for over 25 years.

Product description

This Beckett Pond Pump is ideal for medium sized foutains, waterfalls, and container gardens. This fountain reaches a maximum lift of 78 inches and has different stream settings that pump a maximum of 280 gallons per hour. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast vaierty of flora. The black, plastic casing forms a hardy piece of equiptment. The pump operates oil free, eliminating the risk of water contamination. Includes 6 foot power cord.

• SUBMERSIBLE POND FOUNTAIN PUMP: Enhance your water feature with this device. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• INDOOR OR OUTDOOR USE: Ideal for medium fountains and ponds. Max height of fountain is 6.5 ft. Pumps water at adjustable rate, up to 280 GPH.
• LOW MAINTENANCE: Simply clean filter by disconnecting from pump and rinsing with clean water.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 1/2" and 5/8" tubing.
• INCLUDED: Fountain pump and 6 ft power cord. 2-year limited manufacturer's warranty.

User questions & answers

Question:	The description says this is a 250 gph pump, but the name says 280. is this the same model as 21086g 250 gph beckett pump
Answer:	I returned this order. I wanted a larger filter basket
Question:	Is the 280 an external or submersible pump
Answer:	The pump is being used in a small outdoor water feature and it is totally submerged. We live in Arizona, so we don't necessarily have to worry about the pump freezing, but that should be considered. The pump does exactly what we want and is highly recommended.
Question:	This medium Beckett 280 gph is for external installation, right
Answer:	Yes, it's going strong in my patio fountain.
Question:	bought this item last year, only work it for the late summer, however now the water is not flowing properly, lost its ability to flow fast, please hel
Answer:	Probable cause - debris around impeller: Unplug the pump and twist off impeller housing and clean out debris.