14 best gph pond pumps

Product description

Simple Deluxe pumps are quality products, designed using the very latest technological developments. The pumps are suitable for use in hydroponic systems, ponds, aquariums, fountains & filter systems. The pumps have been developed on the basis of the so-called synchronous technology, whereby the electrical parts are fully encapsulated in epoxy resin. The pumps have an economical, powerful & reliable motor. The entire series are suitable for installation on dry land for in-line use or submersible into the water. Our submersible pumps are equipped with a ceramic shaft & therefore also suitable for use in salt water.

• #1 has pre-filter included - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet
• Durable quality - Our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
• Safe & easy - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our electric cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
• 3 size threaded nozzles. 83 inch, 1.06 inch, 1.34 inch) – Please note inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet
• Versatile - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems

User questions & answers

Question:	I was expecting a fitting to connect a hose to the pump inlet, but none was included. Where can I find one
Answer:	it is a submersible pump so long as the plug don't get wet
Question:	Does this pump have adjustable flow
Answer:	I use mine outdoor, submerged. The only thing I hear is thrush of water over my waterfall. And I have run it 24/7 for over a year with no problems. I bought a second one to drain my jacuzzi. Great product, & very dependable.
Question:	Bought the 1056 Gph model cannot find an adapter so that I can hook it up to flat filter box. 3/4”or 1” npt do not fit. what is the intake size
Answer:	Not sure quarter inch too small half inch too big. Ended up using half inch tube with half inch hose clamp works great.
Question:	Why are people saying it cannot be used as an inline pump? according to pics,remove control knob,connect fitting & place pump out of water
Answer:	If your not concerned about how long it takes, I used it to pump out a much smaller volume and had to switch to a different pump. I used a Master submersible utility pump, model 540094-01, 1/4 HP, also available on Amazon, but about 4x more expensive. The FREESEA was taking forever. The Master pump has a garden hose size output.

Product features

Garden Fountain

Hydroponics System

Aquarium

Simple Deluxe 1056GPH Pump LGPUMP1056G includes removable front cover, impeller, rubber mounting feet, and 15 ft waterproof power cord

• Voltage: 120V/60Hz
• Amps: 2.30A
• Watts: 276W
• Flow Rate(G/H): 1056GPH
• Max Lift Height: 12 ft
• Dimensions(Inch): 8.3 x 4.64 x 7.08
• Cord Length: 15 ft

• SOLID CONSTRUCTION: The shaft and drive ring piece are made from silicon carbide material, reduce the attrition and increase the service life. IPX-8degree
• ENERGY SAVING, LOW NOISE: Ultra-quiet operation design(30-40db).Less power (120W)consumption with high output(2600GPH/9200LPH) compared to other pumps. Fits for 420 Gallon Pond.
• HIGH LIFT WITH DETACHABLE FILTER: Water lift height can be up to 14.8FT/4.5m. This pump will more than meet your water feature’s needs, and with a portable handle and detachable filter you can take this pump anywhere you need it.
• EASY INSTALLATION: Adjustable outlet direction and 20.3FT power cord will meet different requirements.Flexible tube size: 1” or 1 1/4 ID. functions with filtration systems.
• MULTIPLE USAGE: VIVOSUN's Fixed Flow Rate Pump can be used as a submersible or inline pump. It’s great for ponds, fish tanks, fountains, waterfalls, hydroponic systems, and irrigation systems. We provide a 1-year warranty for this water pump. If you are not completely satisfied with our water pump or receive a defective product, we are happy to find an acceptable solution. Please do not hesitate to contact us with any questions or concerns

User questions & answers

Question:	How do you get the company to answer about problems? Warranty? Pump was sending electrical current into the water. 2 weeks no reply. Shocking
Answer:	Did you go to amazon or check sellers site for contact info ? Are you plugged into a ground fault electrical outlet /? If so you do have a bad pump just keep trying to contact the seller . Notify amazon you will get a FAST ANSWER the seller will be kicked off amazon !!!!
Question:	What size are the attachments that screw on the nozzle I feel like I got 2 of the same size
Answer:	Inch and a quarter ID
Question:	Does this pump have an intake valve that lets you attach a hose to it? meaning, can i add a hose to the intake and outlet portion
Answer:	It does have an intake valve, but you have to cut part of the plastic end off (and thus voiding the warranty) to access it. I did this - though to attach a UV filter, not a hose. I didn't have a dremel, but it would have made it a lot easier to make that cut. There's probably a better pump you don't have to do this for. When this one goes on me, I'll find one I don't have to modify.
Question:	What size fountain attachment can work with this
Answer:	Your question is a little vague... are you asking what size tubing you can attach? Or are you asking how high the pump will lift the water? It connects to 2inch inner diameter pipe on the outlet, and on the intake as well if you desire. I personally left the screen on the intake side and put an adapter on the outlet side and connected 3" pipe. The pump specs say it will lift 26feet high. I have about 35feet of 3inch pipe going to a Y, where it splits into 2 waterfalls.

Product features

VIVOSUN 2600 GPH Submersible Water Pump120W

VIVOSUN's 120W Submersible Water Pump is made of a heavy-duty silicon carbide material which is ultra-durable. It uses less power (120 W) but also provides a high output (2600 GPH/9200 LPH) with super low noise (30-40 db).

Detachable Cover

Built with a detachable and cleanable cover to prevent blockage

20.3-ft-long Power Cord

An extra-long power cord allows your pump to reach where it’s needed

Four suction cups

Four suction cups are easily attachable to most surfaces so your pump will stay secure

Adjustable Nozzle

With an adjustable nozzle, your pump will operate just the way you need

Product Specifications:

Power AC: 120 V / 60 Hz

AMP: 1.1 A

Power: 120 W

Lift Height: 14.8 FT/ 4.5 M

Power cord length: 6.2 M/ 20.3 FT

• PROFESSIONAL PUMP - The water pump is designed for pond, water gardens, fountains, aquariums, waterfalls, statuary hydroponic, irrigation systems and water features; It's submersible and also can be used terrestrially, but long-time terrestrial use is NOT recommended
• PREMIUM MATERIAL - The outer shell is made of epoxy resin with IPX8 waterproof rating; The shaft and drive ring pieces are made from ceramic material (1600 GPH/2700GPH) or silicon-carbide material (4500GPH/5300GPH/9000GPH); Abrasion-resistant meaning long-term use
• LOW ENERGY CONSUMPTION - High-performance magnetic drive motor technology leads this pump energy efficient and simple to maintain; Oil-free and quiet operation with noise levels between 30–40 DB
• DIRECTION ADJUSTABLE - Direction of water can be adjusted to 5 different positions to meet different water spraying needs; Output valves fit 2 adaptors that fit 1” and 1-1/4” Inner Diameter tubing and lift height can reach up to 14.8 feet
• THOUGHTFUL DESIGN - A protective mesh shield encloses the pump and keeps out large debris reduce need for maintenance; The portable handle makes it easy to move for your pumping needs; A pre-wired 20.3 feet power cord makes the pump easy to use

User questions & answers

Question:	Can this be used as a pump for drip irrigation, (it would be submerged and left on for several hours a day
Answer:	Is long as it's submerged by At least several Inches And I don't restrict the flowToo much
Question:	Whats the PSI for this pump
Answer:	depends on the lift 2700 GPH at 1 foot about 800 per hour at 8 feet
Question:	I purchached in dec 2019 and its failed. Is there a warrenty
Answer:	Dear Valued Customer, Thank you for choosing VIVOHOME products. As for your question, we sincerely apologize for the inconvenience caused by the item. To solve your issue, would you mind contacting us with your Amazon order ID via Amazon's direct messaging service? We will provide you with a satisfaction-guaranteed solution within 24 hours. Best wishes, VIVOHOME Customer Care
Question:	My pump stopped working and when i pulled it out it started smoking. what do i do?it dosent turn on at all
Answer:	Return it to the manufacturer. I've purchase two of these pumps and they worked for a few weeks then they stopped. They were replaced but the replacements only lasted a few weeks. I have a smaller one that I purchased as a backup for when I purchase new kois, don't know if that is still coming on. I think that there is a serious problem with these pumps I would definitely never purchase these again

Product features

VIVOHOME Ultra Quiet Electric Submersible Water Pump 120W 2700GPH

This pump is a complete solution for supplying water to your fountains, external filters, any indoor or outdoor features. The VIVOHOME submersible water pump is adjustable to five positions ensured to fit your particular set-up. The nozzle head valve and multi-hose adapter make it simple to connect to almost any hose size.

More About The Product

Specification:

• Voltage/Frequency: 120V/60Hz
• Power: 120W
• Amps: 1.1A
• Pressure: 0.045MPA
• Output: 2642GPH, 9200L/H
• Lift Height (Max.): 4.5m/14.8ft
• Tube Inner Diameter: 1 in and 1-1/4 in
• Power Cord Length: 6.2m/20.3ft

Easy Installation

No tools required. You can easily change the outlet head or detach protective cover for cleaning and maintenance.

Steady Sucker Base

The suction cup base provides ample stability to avoid toppling over, even when operating on the highest pressure.

Adjustable Nozzle

The water outlet direction can be adjusted to 5 different positions to meet different needs.

Long Power Cord

The pre-wired 20.3-Foot power cord handles variable distances of application.

Product description

This Beckett 3/8 Horse Power Pond Pump Kit is ideal for mid-sized ponds, up to 60 sq ft. This fountain reaches a maximum lift of 93 inches and has 19 different stream settings that pump a maximum of 680 gallons per hour. It has three different nozzle attachments, each creating a distinct effect that will undoubtedly add dimension and allure to your garden and backyard water feature. Pond pumps circulate and aerate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast variety of flora. The pump operates oil free, eliminating the risk of water contamination. Includes 15 foot power cord.

• Submersible Pond fountain pump: add beauty to your pond with choice of spray head, water bell or bubbler adaptor. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• Outdoor use: Ideal for medium ponds up to 7'x5'. Max height of fountain is 7. 8'. Pumps water at adjustable rate, up to 680 GPH.
• Low maintenance: pre-filter (included) keeps the pump clean and prevents debris from entering, preserving the device. Simply Clean filter by disconnecting from pump and rinsing with clean water.
• Easy to operate: attach desired fountain nozzle, place pump in sturdy location within the water, and plug into nearest outlet. Fits 3/8", 1/2", or 3/4" Tubing.
• INCLUDED IN KIT: 3/8 pump, filter, prefilter, 3 fountain heads, 2 extension tubes, 2-way control valve, 2 adaptors, and 15ft power cord. 2-year limited manufacturer's .
• Power Source Type: Electric

User questions & answers

Question:	we prefer to use the tube to make a waterfall (not a fountain). Is that possible with this unit
Answer:	this unit is very powerful - in my opinion, it has enough output to handle a waterfall. make sure you have extra filters on hand or make sure you regularly clean the filter that comes with the unit - it prevents a world of gunk from clogging the impellers inside the pump, especially if you have fish.
Question:	Our pond is 3 feet deep. If I bought extra extension tubes, is the pump powerful enough to push the water over 4 feet to make a fountain
Answer:	my pond is 2 ft deep, and it works well in my pond, but I'm planning on making mine deeper to 3 ft next month, I would think it would be fine but I'm not 100% sure.
Question:	can power cord be removed
Answer:	No the power cord as I view it cannot be removed.
Question:	With the 2 extension tubes attached to the pump how deep of water can the pump be placed in
Answer:	Here is an update on the pump.. I purchased a bigger pump that does 1350 gpm at Harbor Freight it is on sale for 59.00 and is 1/6 hp. I needed something stronger for my water fall tubes which is a total of 6. I may use this pump just a fountain feature. Its a good pump, but for my application, I needed something a little more powerful.

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter, and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 3100 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 8"L x 5"W x 6"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 3100
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 8"L x 5" W x 6"H for use in ponds up to 33' wide

User questions & answers

Question:	I have a 13ft x 2 ft circular fountain and am looking to run tubing through a water feature up 6 ft with a bell fountain head - would this work
Answer:	I use this pump to circulate water from a bottom pond (2000 gallons) to a top pond (900 gallons) for a waterfall. The water is pushed through 30 feet of 1.5 inch tubing up an incline of 5 feet. This pump circulates our water volume very well.
Question:	Does this have a threaded intake to allow connection of solid PVC pipe
Answer:	hello....I am presently far away from the pump (Az) in Europe and will not return back to Az before the end of August...sorry! Yet, I seem to recall that it did not have a threaded intake and I hooked it up to the PVC pipe with a short flex and clamps....hope it helps! I believe you meant "outtake" and not "intake" since the "intake" (where it "takes" the water in) is located underneath the pump itself, no hose, no pipe?
Question:	CAN YOU USE ONE INCH TUBING
Answer:	You can use any size tubing with the proper adapters however one must remember that using a small diameter tubing will increase the resistance and turbulence through the tube thus greatly reducing its flow capacity (its a logarithmic function). These types of pumps can handle high resistance on the output side however not at the input end so hopefully you are only referring to choking down the output and are willing to sacrifice the huge drop in flow as a result (note: expect a large pressure increase, similar to putting your thumb over the end of a water hose).
Question:	I'm confused. it's listed as a 3100gph but on the website it says maximum flow rate of 1100gph. which is it
Answer:	Hi Steve, the gph of any pump depends on the head pressure working against it. The Cyclone PAL3100 pumps 3100 gph at zero head. It pumps 2,251 gph at 5' of head, 1390 at 10' of head and 479 gph at 15' of head (according to the manufacturers literature). Head is roughly calculated by adding three things together, 1' of head for every foot of height from the surface of the pond to the highest point that the water will be pumped (if you could measure it straight up), another 1' of head for every 10' of tubing length, and another 1' for every sharp turn or obstacle like a UV unit or a 90 degree elbow). Sincerely, Nate at Practical Garden Ponds 484 356 5351 P.S. The reason there is sometimes conflicting information on Amazon is because multiple vendors share the same description and most of us don't have access to changing the information.

Product description

Welcome to Pond Boss we specialize in the latest innovative & energy efficient water gardening products to help you create, maintain & enhance your own backyard pond, waterfall, or fountain feature. We take pride in providing you with durable, Eco-Friendly equipment including our low-water shut-off pumps, UV filtration systems, Non-toxic water treatments, pond liners, accessories & so much more. We have been providing water garden products for over 10 years therefore, our experienced customer service department is always ready to assist you in building & maintaining your water garden or backyard pond

• Waterfall pump; Anti-Clog Technology
• Energy Efficient
• Quiet Operation
• Easy Assembly
• Flow rate of 2300 GPH at Zero foot lift

User questions & answers

Question:	What is the thread size for the outlet connection
Answer:	We actually had to use an adapter and some silicone from the hardware store. Totally worth it though, because it was about half as much as the brand that I usually buy when I need a replacement. (This has happened three times in the past twenty years.) Anyone with minor plumbing skills should be able to figure it out.
Question:	How many watts is the pump
Answer:	Hi Mandy,The PW2300 has a maximum wattage of 130 Watts.Steve BrunkPractical Garden Ponds484-356-5351
Question:	is this pump submersable
Answer:	Yes Nice pump
Question:	How long is the cord
Answer:	I think about 16`ft, plenty of power

Product description

Features:

1. Strong wave-making, aquarium water circulation

Simulate the natural environment, create an ecology system for the fish and let the fish living in a happily environment.



2. Multifunctional

Indoor: Aeration, pumping and changing water, water circulation for fish tank, one machine with three purposes. The diameter of 0.51 inches is compatible with most hoses on the market.

Outdoor: With a wide range of applications, it can be applied to aquariums, ecological water tanks, ponds, water landscapes, fountains, hydroponics, etc.



3. Low water level work

Equipped with four strong adhesive suction cups, which can be installed horizontally and sideways, easily meet customers' water level requirements.



4. Preferred material

The pump casing is made of new ABS plastic and resin, and the impeller shaft is composed of ceramic shaft, which has the characteristics of corrosion resistance, acid and alkali resistance, wear resistance, etc.



5. Quiet and energy efficient

High-quality pure copper motors and sturdy accessories provide a quiet working environment, while it will save energy and reduce the consumption.



Specifications:

●Power: 8 watt

●Flow range: 120-200 GPH (400-800L / H)

●Voltage: 110 V-120V, 60Hz

●Product size: 2.8 * 1.7 * 3.1 inches

●Maximum lift: 3.2 feet (suitable for 0.51inch/13mm diameter nozzle)



Precautions:

1. Please put the pump in water before connecting power. If you need to change the water, please disconnect the power.

2. Please clean the machine regularly, preferably once every two months, add some olive oil to the rotor to avoid blocking the water inlet and abnormal sound of rotating blades.



Package include:

1 * 8 watt submersible water pump

1 * 0.51"/13mm nozzle

1 * oxygen nozzle set

• Power: 8 Watt, Adjustable flow rate: 120-200 GPH (400-800L / H), Maximum lift: 3ft (0.51 inch/13mm nozzle), Power cord length: 5.2ft
• 【Able to Adjust Water Flow Rate】You can use the adjustment knob to conduct the most suitable water flow rate as you need, ranging from 120 GPH-200 GPH (400L / H-800L / H). The submersible water pump equipped with 0.51" diameter threaded interface nozzle, it is not easy to fall off and the flow is stable.
• 【Noise Reduction Design】Design with ceramic shafts, resistant to corrosion and difficult to break. The pure copper wire motors are highly energy-efficient and provide with quiet and pollution-free environment. The sound during working is lower than 40 decibels, which will keep peace of mind without disturbing the outside world.
• 【Detachable and Easy To Clean】The submersible fountain pump have been optimized in every aspect to ensure the durable. The snap design with flexible and stable, able to easy disassembled and closed without any tools. Besides, regularly clean the water inlet able to keep a longer life.
• 【Versatile】The bottom of the submersible water pump is equipped with four powerful suction cups, which can be installed at the bottom and side of the aquarium as need. The water pump able to help the aquarium to circulate water, it also can be use air water nozzles to aerate. Create an environment close to nature for your fish. It is also suitable for ponds, fountains, hydroponic systems and waterscape.

User questions & answers

Question:	How do I set this up for my tank? Doesn't really give instructions for set up. only maintanence
Answer:	As the title says, these are a 5 pack, so 5 bands. We sell these in 5 packs and another listing with a 20 pack.
Question:	Does this have to be submerged to pump water
Answer:	This size will fit only the Mini iPad, for my iPad Air 2 I bought the 9" pack https://www.amazon.com/gp/product/B00H1ERHDQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and they fit perfectly, they are great as a way to hold the iPad comfortably with one hand. Hope this helps.
Question:	How long does the manufacturer guarantee it
Answer:	Not sure why this is asked on the 6" size but the 9" bands are 18 inches in circumference, the 9" is the lay flat measurement.
Question:	is it too powerful for a 5 gallon tank
Answer:	I think it may be too tight a fit if the binders were near-full. This is one of those occasions you might need to buy and try as the cost is not prohibitively great.

Product description

Our TotalPond 300 GPH Fountain Pump is the perfect choice for large fountains and spitters. This durable, compact pump might be small but its ideal pumping height is 5 ft., with a maximum pumping height of 6 ft. It is also energy smart, so you'll save money and our natural resources. We designed the 300 GPH Fountain Pump to run quietly during operation so it works hard but cannot be heard. The pump is easy to install, simple to use and has an adjustable water flow control.

• The 300 GPH Fountain Pump is ideal for use in large fountains.
• With a maximum pumping height of 6.2 ft. at 0 GPH, this energy-efficient pump helps power fountains with an ideal pumping height of 5 ft.
• Perfectly fits into existing fountains and water features. These pumps may be small, but they are built to pump a lot of water.
• All of our fountain pumps have an adjustable flow control to fine-tune the flow rate.
• Pump design allows for simple and quick access to all moving parts; no tools necessary.

User questions & answers

Question:	What are the amps on this? I need .05 amp. .03 is not powerful enough
Answer:	It has a bracket welded on back that lips over a nail, etc.
Question:	What are the inlet and outlet ID pipe sizes
Answer:	I gave this as a gift to my friend. She has it hanging right outside and no it has not rusted. Birds couldn't wait to nest in it.
Question:	what are the height, width, length measurements? My opening is a perfect square of 2"X
Answer:	I bought this as a gift for a friend! She loves it and has had birds nesting in it for several seasons. I know she has it hanging on a tree trunk. Good luck
Question:	Is it really quiet, compared to other fountain pumps
Answer:	Not sure, I gave it to a bird loving friend and it looks great in her garden! She even added some crystal Mardi Gras beads to look like water coming out of the spout. I would say the opening is about 2 inches. I am very satisfied with my purchase and will use this company again. Beth B

Product features

Compact Size

Perfectly fits into existing fountains and water features. These pumps may be small, but they are built to pump a lot of water.

Flow Control

All of our fountain pumps have an adjustable flow control to fine-tune the flow rate and pumping height. When in doubt, more pumping height is better since you can adjust flow with our Flow Control feature.

Connection

We recommend using the largest tubing size recommended for reduced friction and maximum flow. The size of your fountain’s old pump and tubing can help you choose the right pump.

Easy Maintenance

Allows simple and quick access to all moving parts. No tools necessary.

Choose the Right Pump

Choose a fountain pump to match the height of your fountain. Measure from the water level to the highest point of the fountain that the water reaches; choose a pump that has an optimal pumping height greater than the height measured. All of our fountain pumps have an adjustable flow control to fine-tune the flow rate to match your fountain's size and effects. When in doubt, more pumping height is better since you can adjust flow with our Flow Control feature.

Product description

Tips:

US Standard Plug is included in the package,which is only suitable for the US, Canada and Mexico

The Homasy submersible pump features compact, multifunctional, and detachable, perfect for aquarium, tabletop fountains, water garden and hydroponic systems.

 

Compact & Powerful

Compact design is great for space-saving on your tabletop fountain. The maximal flow rate can be up to 80 gallons per hour. Lift height can be up to 2.6ft.

 

Note：

1. Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

2. Prohibit no-load running. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply. It would shorten its lifespan and lead to making loud noises when running in the air for long time.

3. If the product suddenly stop working or make noises, which may caused by debris blockage. Please clean it regularly about once every two months, or add some olive oil on the rotor.

4.Please note if the water level, layout of the water tank match the bump power before purchasing. If the water is too little, motor power is too high, so as the water flow level, the swashing water would make loud noises. Different bump suits different water tank.

5. The maximum flow rate is 80GPH; there might be a plus-minus tolerance, Insufficient power and insufficient frequency would affect the flow rate.If connected with a water pipe, the maximum flow rate would less than 80GPH. If the water sprays out the container, the flow rate would also less than 80GPH.

 

Specifications

Max Flow Rate: 80 GPH (300L/H)

H-Max (Lift Height): 2.6ft (0.8m) 

Power: 4 Watts

Voltage: 110 - 120 V @ 60Hz

Length of Power Cord:5.9ft(1.8m) 

Dimension: 1.87in x 1.68in x 1.24in (47mm x 43mm x 30mm)

 

Package Included: 

Water Pump x 1

8.5mm Nozzle x 1

13mm Nozzle x 1

• Ultra Quiet Design & Perfect Motor: The relible and duarable motor does not produce much noise, giving you quiet environment. It can elevate column of water up to 2.6ft ( 0.8m). (Make sure to connect a water pipe to the smallest nozzle , make sure the joint sealed securely and tightly).
• Adjustable Flow Rate: Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 80GPH(300L/H).
• Detachable & Cleanable: No need any tools to detach it, easy to seperate, easy to clean.
• Compact & Mini Size: The mini size makes the pump easy to hide or disguise in the water. Suction cups is great for mounting onto the glass surface. Dimensions:1.87in x 1.68in x 1.24in (47mm x 43mm x 30mm).
• Multifunction & Two Nozzles: This submersible pump is designed for small to medium size aquarium, tabletop fountains, water gardens and hydroponic systems. Equipped with two nozzles, one is 8.5mm diameters, the other is 13mm, providing different water flow effects.

Product features

Homasy 80GPH Mini Submersible Water Pump

This Homasy submersible water pump features quality motor to deliver powerful performance and lower noise. Mini size makes the water pump easy to hide or disguise, perfect for small to medium size aquarium, tabletop fountains, water gardens and hydroponic systems

Adjustable Water Flow Rate

The adjustable knob enable you to control the water flow rate to get your desired water pressure

Ultra-quiet Operation

High quality motor and 4 strong suction cups provide you with comfort and quiet environment

Compact Design

Dimensions:1.87in x 1.68in x 1.24in, the mini size makes the pump easy to hide or disguise in the water

Fish Tank

Small Fountain Pump

Pet Fountain Pump

Product description

Simple DeluxeSubmersible Pumpsare quality products, designed using the very latest technological developments.The pumps are suitable for use in hydroponic systems, ponds, aquariums, fountains and filter systems. Safest Choice- The pumps have been developed on the basis of the so-called synchronous technology, whereby the electrical parts are fully encapsulated in epoxy resin Reliable - The pumps have an economical, powerful and reliable motor. The entire series are suitable for installation on dry land for in-line use or submersible into the water. Our submersible pumps are equipped with a ceramic shaft and therefore also suitable for use in salt water Simple Deluxe 400 GPH Submersible Water Pump - Pre-filter - 15 ft Waterproof Cord - Lift Height 8.2 ft - Product Dimension(Inch) 5.35 x 2.72 x 3.39 - Nozzles 2x0.51 inch, 0.62 inch, 2x0.75 inch

• PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump Max flow rate: 400GPH, Max Lift Height 8.2ft
• DURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
• SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
• 3 SIZE THREADED NOZZLES(0.51in, 0.62in, 0.75in) - Threaded fittings make it more stable. 4 SUCTION CUP at bottom and 15' CORD, so you can stick it on the right side of the aquarium, either vertically or horizontally
• VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems

User questions & answers

Question:	which size should I buy for a 40 gallon pond
Answer:	Sturdy, plastic like mesh. This bag works great. Keeps the crap out of my pump motor. I do have to pull bag out every few months and wash the bio film off of it.
Question:	What are the dimensions of the whole unit (400gph
Answer:	There is only one opening that accommodates the electrical cords and the tubes.
Question:	Any issues constantly running this pump for aquaponics? Is a replacement pre-filter available
Answer:	If the bag is larger than your pump, it will work. If your pond is dirty with leaves and such, it will clog the bag and slow the pump. If your pond is clean, you should be in good shape.
Question:	Is the 400 gallon/hr model strong enough to push water up a slight incline for 6-7 feet and cascade back down into the pond
Answer:	Thanks for your question. A soft scrub brush and water should do the trick. If you need more help you can call Pond & Garden Depot toll free at 1-866-305-5459 Cody H. Customer Service

Product features

Fountain

Hydroponics

Aquarium

Simple Deluxe 400GPH Pump LGPUMP400G includes removable front cover, impeller, rubber mounting feet, and 15 ft waterproof power cord

Voltage: 120V/60Hz

Amps: 0.45A

Watts: 54W

Flow Rate(G/H): 400GPH

Max Lift Height: 8.2 ft

Dimensions(Inch): 5.35 x 2.72 x 3.39

Cord Length: 15 ft

Product description

Ideal for use in medium ponds approximately 6 ft. x 9 ft. x 1.5 ft., this ETL listed is 30% more efficient than the average pond pump. Among one of the most convenient pumps on the market, this model also allows for variable flow control. This fully submersible pump is able to handle small debris and its epoxy encapsulated construction requires no mechanical parts, which means no harmful oil leakage making it safe for plants and fish. The pump offers maximum durability, whisper quiet operation and effortless maintenance.

• Oil free pump
• Energy efficient designs
• Epoxy encapsulated, fully submersible
• Flow control
• Ceramic shaft and bearings

User questions & answers

Question:	Can it me used as a non submersible
Answer:	This feeder is not recommended for this specific bird, but if they find it, they may be able to access the seed.
Question:	how many gallon pond is this good for
Answer:	Replacement flexports are not available separately, however the feeder is covered under a 1 year replacement policy from the date of purchase.
Question:	does this pump have any dry burning protection
Answer:	I don't know about adjusting the springs. However, if I am around when the starlings show up, I take two metal pot tops and bang them together several times. The starlings take off and go somewhere friendlier. They don't come around very often. The other birds come right back.
Question:	What size is the outlet
Answer:	Yes, many people use only black oil sunflower seeds in their feeders.

• 【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
• 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.
• 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.
• 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
• 【Warranty】: Super durable & reusable; Comes with 1-Year warranty; Any problems with the item you received, please contact us without hesitation.

User questions & answers

Question:	Can this be used to pump manure tea to garden plants? The tea is made from manure in fine mesh bags which is then placed in fresh water
Answer:	Yes
Question:	What size tubing should you buy to fit the .74 inch adapter
Answer:	Can i use 3/4 or 5/8 pvc ? Is there any adapter come with the pump to use pvc?
Question:	Where exactly is the inlet? If used as a small sump pump, how much water will be left
Answer:	The inlet is in the middle of the pump, in the front. So, whether you stand it up like it is in the picture or lay it down on its side, you would have at least 1", maybe 2" of water left. Hope this helps.
Question:	Does it have / need oil or lubricant? Would keg lube work
Answer:	no need to lube. just plug and run it in water.

Product features

VIVOSUN 800GPH Water Pump

• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.

3 oulet adapters

Equipped with three nozzles, first one is 0.51inch diameters, second one is 0.62inch, the third one is 0.74inch, providing different water flow effects depending on your needs.

Water control valve

Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 800GPH (3000L/H).

4 suction cups

The 4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.

Parameter details

Power: 24W; Voltage: 110-120V

Flow: 3000L/H; Power cord length: 5ft

Working environment temperature: 1-36 °C

Product description

This Beckett Pond Pump is ideal for medium sized foutains, waterfalls, and container gardens. This device will add beauty and enhance your small water elements. This fountain reaches a maximum lift of 85 inches and has different stream settings that pump a maximum of 250 gallons per hour. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast vaierty of flora. The black, plastic casing forms a hardy piece of equiptment. The pump operates oil free, eliminating the risk of water contamination. Includes 16 foot power cord.

• SUBMERSIBLE POND FOUNTAIN PUMP: Enhance your water feature with his device. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• INDOOR OR OUTDOOR USE: Ideal for small fountains and ponds. Max height of fountain is 7.1 ft. Pumps water at adjustable rate, up to 250 GPH.
• LOW MAINTENANCE: Simply clean filter by disconnecting from pump and rinsing with clean water.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 1/2" tubing.
• INCLUDED: Fountain pump and 16ft power cord. 2-year limited manufacturer's warranty.

User questions & answers

Question:	Can you get an adapter to make 1/2” tube fit a 3/8” hose
Answer:	First, I have been using this pump for many years and find it very reliable. I found some 1/2 inch vinyl tubing that I force fit over the pump outlet. You should be able to find a fitting in the plumbing department. Sorry I can’t give you a more direct answer.
Question:	Is this pump 60 hz
Answer:	Yes.
Question:	How many watts is this rated
Answer:	115*0.55 = 63.25 watts
Question:	Is this pump a Versa Gold Series
Answer:	Ir took a photo of my Beckett Corp pond pump, it is model G210AG20, it is a VERSA gold series, from Irving Texas. it is 115 volt, .55 amp .We use it in a small pond, to handle water thru our box filter. we had to have a 1/2 inch threaded connection as a vent tube. this is the only one that fit.

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter, and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 5200 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 10"L x 6"W x 7"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 5200
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10"L x 6"W x 7"H for use in ponds up to 33' wide

User questions & answers

Question:	I am looking at powering this with solar panels. Can anyone provide the power requirement for either the 3100 or 5200 at 10' head pressure
Answer:	I'm assuming you have an inverter? Pump will draw 426 watts. Head pressure at 10' will drop the GPH to 3,125 GPH.
Question:	Can anyone attest to durability, energy efficiency, or warranty? Looking at this v Aquascape, which was recommended, but this one is much less
Answer:	I've have been using cycle pumps for over a year now and have had very good service from them in our pond I wouldn't hesitate to recommend them, the only problem I've had was the filter cage will not stay attached to the pump body I attached it to the body with some screws. Power efficiency is exceptional and the 33ft cord is a plus when using the pump in a 50ft pond.
Question:	I am wondering about the tube fitting, I am looking for a 2" male end to be able to attach my tubing to the pump
Answer:	Was the fitting 1.5 or 2in , I’m hoping 1.5 , pls let me know before I purchase
Question:	What is the energy consumption for Alpine 5200gph pump
Answer:	The maximum power usage for the PAL5200 is 426 Watts.