14 best hygrometers with silvers

Hygrometers with silvers, also known as silvered hygrometers, are specialized instruments used for measuring humidity levels in the air. These hygrometers typically feature a design where a silvered hair or thread is used as the sensing element. Here's what you need to know about hygrometers with silvers:

  1. Principle of Operation: Hygrometers with silvers operate based on the principle that human hair or a fine thread of silver changes its length with changes in humidity levels. When the air is humid, the hair or silver thread absorbs moisture from the air, causing it to expand. Conversely, in dry conditions, it loses moisture and contracts. This change in length is used to calculate relative humidity.

  2. Accuracy: These hygrometers are known for their accuracy in measuring relative humidity. The use of silvered hair or thread as the sensing element provides a precise and stable measurement.

  3. Mechanical Design: Silvered hygrometers often have a simple mechanical design. The hair or thread is connected to a pointer or indicator on a scale, which displays the current humidity reading. The scale is calibrated to provide accurate humidity measurements.

  4. Calibration: Periodic calibration is essential to maintain the accuracy of silvered hygrometers. The calibration process involves exposing the instrument to known humidity levels and adjusting it to ensure it provides accurate readings.

  5. Use in Meteorology: Silvered hygrometers have historically been used in meteorological instruments and weather stations to measure humidity. They have been used in various forms, including sling psychrometers, which involve swinging the instrument to obtain wet and dry bulb temperature readings and calculate relative humidity.

  6. Historical Significance: These hygrometers have a long history and were commonly used before the advent of modern electronic humidity sensors.Their accuracy and reliability made them valuable instruments for scientific research and weather monitoring.

  7. Maintenance: Proper care and maintenance are necessary to ensure the longevity and accuracy of silvered hygrometers. This includes keeping the instrument clean, protecting it from contamination, and storing it in a stable environment.

  8. Limited Availability: Silvered hygrometers have become less common in recent years due to the widespread adoption of electronic humidity sensors, which are more convenient and require less maintenance. However, they are still used in some specialized applications and as historical or educational instruments.

In summary, hygrometers with silvers are humidity measuring instruments that use the expansion and contraction of human hair or silvered thread to determine relative humidity levels. They are known for their accuracy and have historical significance in meteorology and scientific research. While less common today, they are still valued for their precision in specific applications where accurate humidity measurements are essential.

Below you can find our editor's choice of the best hygrometers with silvers on the market
  

Amotpo Indoor/Outdoor Wall Clock,12-Inch Waterproof Clock with Thermometer and Hygrometer Combo,Battery Operated Quality Quartz Round Clock,Silver

Amotpo

Based on 334 reviews Check latest price

Product description

Specification:



    Color: Silver.

    Material Type : ABS environmental engineering plastic.

    Pointer Material : metal.

    Pointer Color : black.

    Movement : quartz ( Battery Powered).

    Diameter : 12-inch.

    Style : modern / classical

    Numeric Types: arabic numeral

    Display : analog.

    Packing Includes: 1 x Wall Clock , 1 x Hook



Lock frame upgrade



replace the button lock with screw lock to reinforce the wall clock.

Pointer upgrade



the aluminum hand is strengthened with copper sleeve, which can be more closely combined with the movement. The copper sleeve makes the movement more accurate.



  • Analog Thermometer & Humidity Combo:Indoor/outdoor clock has built-in Analog hygrometer & thermometer combo. Automatically measures accurate temperature degree from -30℉ to 130℉(-30℃ to 50℃), humidity readings from 0% to 100% RH.
  • Waterproof Wall Clock:Double protection,Front rubber seal& Waterproof rear cover Which Keep the dial and movement of your wall clock away from rain.
  • Decorative Design: Retro frame with bright silver bezel, built-in Analog hygrometer & thermometer combo,ivory white dial face and large black numbers provide a good view,It is a very beautiful indoor and outdoor decorations.
  • Silent Non-ticking:quiet sweep and precise movements to guarantee accurate time and ultra-quiet environment.
  • Application: This ABS-framed wall clock measures 12 inches in diameter,1.7inches in Deep. Come with wide slot in back for easy hanging. It is perfect for office ,living room, classroom, bedroom, bathroom,Pool,Patio.

User questions & answers

Question: How do you get into the battery case? I can't seem to access the battery. The case on the back is secured tightly, and pulls the hands when I move it
Answer: It's more simple than you think. You squeeze the small black oblong plastic "box' on the back of the clock...that allows it to just pop out, all g with the battery. (At least that's what I remember. I can't get up on a tall ladder right now to check it.. sorry). 😁
Question: Is this clock silent? Would like one that has an audible tick
Answer: It is silent.
Question: What are the exact dimensions of the clock? They give the size of the package, but that's different
Answer: Outer case is 12×12 the face is 10×10 inches
Question: What type of battery ? Will alkaline work, or need carbon zinc? Is a battery included? Is back easy to get off
Answer: Just a reg aa battery

Poolmaster 52602 Indoor and Outdoor Clock, Thermometer, Hygrometer, Silver

Based on 53 reviews Check latest price

Product description

For outdoor or indoor use, this 3-in-1 weather-resistant clock features second-hand quartz movement and large easy-to-read numbers. The frame is made of ABS plastic with glass lenses. Thermometer and Hygrometer indicators are featured.

From the Manufacturer

Since 1958, Poolmaster has been a leading manufacturer of aftermarket pool and spa products with an unwavering commitment to quality, service and reliability. Poolmaster offers products across six different product lines- Backyard and Decor, Inflatables, Floats, Maintenance, Swim and Dive, and Toys and Games. Poolmaster - We Make Water Fun!

  • Clock, thermometer, and hygrometer for measuring humidity
  • Weather resistant so you can enjoy outdoors
  • Durable ABS frame with brushed silver finish; measures 10.75-inches by 12.5-inches
  • Perfect for patio or backyard decor or display inside to brighten up a room
  • Battery operated - requires 1 AA battery (battery not included)

User questions & answers

Question: I need a replacement cover for the mechanism on the back. any ideas
Answer: No
Question: I need a clock to put on the fence outside by our pool. Some reviews said it worked great but others said it didn't. What do you recommend
Answer: I've had one for about 4 years now, still works great. Replaced batteries once or twice, adjusted time only a couple times. My clock is installed under a roof in the breezeway, so it still looks new since it is not directly exposed to the elements.

La Crosse Technology 45.2033 Tablestand Thermo-Hygrometer, Silver

La Crosse Technology

Based on 7 reviews Check latest price

Product description

Monitor the climate in any room with the color coded comfort zones on this precision thermometer-hygrometer. Styled in chrome-brass ring and wall mounting or optional table stand.

  • Precise accuracy
  • Chrome-Brass case
  • Color comfort zone levels
  • Wall hang or table stand display
  • Made in Germany

User questions & answers

Question: Manual for the la crosse technology thermo-hygrometer
Answer: Hi. Why would you need a manual for this product? All you have to do is put the thermo/hygro product onto its base and you're set! Unless you mean to have it translated into your langauge (or metric units), well, there might be other products like this one. Good luck!

Cigar Oasis Caliber 4R Silver Digital/Analog Hygrometer by Western Humidor

Cigar Oasis

Based on 346 reviews Check latest price

Product description

Accuracy of Digital meets the beauty of Analog… Western Humidor has always been known as the maker of the most accurate hygrometers in the cigar industry and beyond. Western Humidor is original designer of the digital hygrometer for the cigar industry. We took the accuracy of the Caliber IV digital and added this attractive classic analog design. Humidity & temperature readings, Fahrenheit/Celsius readings, Three day high/low & averages for humidity & temperature, Silver trim. Gauges between 20-90% Relative humidity (RH) Dimensions: Diameter: 2.25” Depth: 0.7”

  • Advanced humidity sensor maintains accuracy to +/- 1%
  • User recalibrate-able
  • Color coded for easy reading
  • Secure magnetic mount
  • Battery included

User questions & answers

Question: does it come with a mangnet so it can be mounted
Answer: Yes Description Accurate to ± 1% RH Slow response readings Updates every 10 seconds Secure magnetic mount Fahrenheit/Celsius scales Maximum and minimum readings
Question: Can you switch it to Celsius
Answer: Yes. There is a button on the back to switch it to Celsius.
Question: Will this fit as direct replacement of the hygro in the front of a mantello humidor? Can anyone give me the exact measurements
Answer: no this will not work is not designed to be a front mount. The only digital made for replacement of an analog front mount hygro is amazon item # B00JS52EXO
Question: What kind of battery does this use
Answer: The Caliber 4R uses a Lithium CR 2032 battery.

Prestige Import Group - 2.5" Digital Mountable Hygrometer w/Calibration for Cigar Humidors - Color: Silver

Prestige Import Group

Based on 28 reviews Check latest price

Product description

An ultra-sharp round digital hygrometer with a high polished silver bezel makes keeping tabs on humidity levels easy. Also includes an on-board calibration feature to adjust your display as needed. Temperature and relative humidity are displayed through an easy to read multi-colored gauge. Switch temperature read-out between Celsius and Fahrenheit. Includes a battery and magnet set for easy mounting to the interior of any cigar humidor.

  • Digital Mountable Hygrometer w/ Calibration | Color: Silver | Multi-Colored Gauge for Easy to Follow Display
  • Fahrenheit & Celsius Toggle Button | Displays Relative Humidity %
  • Accurate & Precise within +/- 1% | Includes Magnet Set for Easy Mounting
  • Convenient Size | Front face diameter: 2.49"/63 mm | Back side diameter: 2.29"/58 mm x 0.6" Thick
  • Built-in Humidity Calibration Feature | Includes Battery

User questions & answers

Question: Does this fit in the same size hole as the analog ones
Answer: My experience is that it is a bit bigger than the standard analog.
Question: Will one of these fit the berkley cherry humidor by prestige imports? If not what hygromoter will fit rhis humidor
Answer: This unit will be able to fit the Digital version of the Berkley from Prestige Import Group. As for one that will fit the Analog version I don't believe that units hygrometer is sold independently.
Question: Is there a manual for this thing? I just bought one with the understanding that it can be adjusted but none of the buttons seem to address the problem
Answer: Hold the C button down for a few seconds and you will then be able to adjust the calibration UP (+) or DOWN (-)

Marathon Comfort Index Thermo-Hygrometer | Indoor Digital Thermometer Wall Mount or Table Stand | 24 Hour Min and Max Temperature Humidity Gauge (Silver)

Based on 5 reviews Check latest price

Product description

Marathon Comfort Index Thermo Hygrometer displays relative indoor humidity and room temperature.

  • Comfort Indicator ensures proper humidity control, helping you to maintain a comfortable atmosphere in your home.
  • Measurable indoor temperature range of -10°C (14°F) to +50°C (122°F).
  • Measurable indoor humidity range of 20% to 99%.
  • Past 24 hours maximum and minimum record for both the temperature and humidity.
  • Easy to read Comfort Indicator.
  • With a retractable stand and a wall-mount hole, this digital thermometer indoor can be easily attached to your wall or placed on a table top.
  • Suitable for the decore in a living room, bedroom, bathroom, kitchen, baby room, nursery decor, on an office desk, closet, incubators hatching eggs, greenhouse, garden, wine cooler cellar, basements, critter terrarium etc.
  • Humidity reader indicates current air condition ensures proper humidity control, benefit for skin, allergen and other health problem.
  • Solid aluminum case makes it light weight yet strong and durable.
  • Available in two colors (Black and Silver) for any decorations home needs.
  • Battery Powered 2 x AAA batteries required.

  • LCD DISPLAY - Easy to read comfort indicator, monitor digital temperature and humidity in Fahrenheit to Celsius.
  • MEMORY - Past 24 hours maximum and minimum record of temperature and humidity.
  • MEASURE - Measurable indoor temperature range of -10°C (14°F) to +50°C (122°F) and indoor humidity range of 20% to 99%.
  • WIDE APPLICATIONS - Mounts easily to your wall for added decor and comes with a retractable stand to place on any flat surface.
  • INCLUDED - Battery operated 2 X AAA batteries included

User questions & answers

Question: Did somebody check that this marathon thermo-hygrometer gives the correct readings of humidity? yes? no
Answer: Yes hygrometer gives accurate readings compared with other devices in the same area.

HOKCO Weather Station Analog Barometer, Thermometer, Hygrometer, Aluminum 13 inch (Silver)

Based on 6 reviews Check latest price

Product description

This unique weather station encompasses overall design with fine workmanship. It incorporates the three most useful weather instruments, a thermometer, a aneroid barometer and a dial hygrometer. The center dial shows the current barometric pressure with weather forecast symbols and the upper and lower dials display the temperature in Fahrenheit and the relative humidity as a percentage. All three instruments are set in a silver anodized aluminum housing to withstand the elements. This weather station can be wall-mounted either on the exterior or in the interior of your home. Measuring Ranges: Temperature: -20°F to 120°F Humidity: 0 to 100% RH Barometric Pressure: 28.4" to 31.6" Hg. (Maximum altitude for barometer operation is 3,800 ft. above sea level.) Dimensions: Length: 13 in. (33 cm) Width: 4 in. (10.1 cm) Depth: 1.75 in. (4.4 cm)

  • Anodized Aluminum Housing with 3 Analog Weather Instruments
  • Accurate Weather Forecasting
  • Aneroid Barometer, Thermometer, Hygrometer to Measure Humidity
  • Maximum altitude for barometer operation is 3,800 ft. above sea level
  • Length: 13 in., Width: 4 in., Depth: 1.75 in.

User questions & answers

Question: Is this item battery operated or does it need to have electricity
Answer: No battery or electricity needed. All three instruments are analog.
Question: please can you tell me how you set this to work. Do you set the middle one up first with the screw at the back?--sjhob2014_
Answer: All three instrument can be calibrated. Due to routine package handling and atmospheric pressure changes during shipment, instrument readings may be affected during transportation. Therefore, certain adjustments may be needed to ensure that the barometer, thermometer, and the hygrometer show their proper readings. Weather Station Calibration Instructions:BarometerDetermine what the correct barometric reading is for your location. Local weather reports on television, radio or the internet will give you an accurate barometer reading for your area. Adjustments can be made to your barometer by rotating the screw on the back side of the barometer. Place a small screwdriver inside the hole and connect with the adjustment screw. Turn the screw while watching the dial face, aligning the pointer to the proper barometric reading for your area. It is normal for the needle to appear jumpy and/or initially difficult to set to the exact reading. After setting the pointer tap the barometer to be certain that the needle settles into the correct position. This may take several attempts.The importance of the barometer is its ability to indicate changes in weather conditions. The adjustable knob on the face of the instrument allows you to measure relative change. Move the adjustable knob to place the marker over the barometer's current reading. The marker is then a reference point for you to use at a later time to see to see how much, and in what direction, the barometer needle moved. The changes, either rising or falling, can be used to predict local weather 24 to 48 hours in advance.Maximum altitude for operation is 3,800 feet above sea level.ThermometerThe thermometer may be adjusted to the correct temperature if the instrument is out of calibration. This is done rotating the screw or small slot area on the back of the thermometer until the pointer is at the appropriate position on the scale.HygrometerThe hygrometer indicates the humidity of the room that it is in. We recommend that the hygrometer is calibrated at least once a year. To do this, wrap the entire instrument in a real moist towel for 30 to 40 minutes. Remove the towel and the hygrometer should indicate 98-100%. If this is not the case, the instrument can be calibrated to that reading by turning the adjustment screw or slot on the backside of the hygrometer. After calibrating the weather station will slowly return to normal room conditions and the hygrometer needle will begin to fall, stopping at the correct humidity reading for the room.
Question: Is this the one where you set the middle one up first with the screw at the back
Answer: All three instrument can be calibrated, individually, at any time.Weather Station Calibration Instructions:BarometerDetermine what the correct barometric reading is for your location. Local weather reports on television, radio or the internet will give you an accurate barometer reading for your area. Adjustments can be made to your barometer by rotating the screw on the back side of the barometer. Place a small screwdriver inside the hole and connect with the adjustment screw. Turn the screw while watching the dial face, aligning the pointer to the proper barometric reading for your area. It is normal for the needle to appear jumpy and/or initially difficult to set to the exact reading. After setting the pointer tap the barometer to be certain that the needle settles into the correct position. This may take several attempts.The importance of the barometer is its ability to indicate changes in weather conditions. The adjustable knob on the face of the instrument allows you to measure relative change. Move the adjustable knob to place the marker over the barometer's current reading. The marker is then a reference point for you to use at a later time to see to see how much, and in what direction, the barometer needle moved. The changes, either rising or falling, can be used to predict local weather 24 to 48 hours in advance.Maximum altitude for operation is 3,800 feet above sea level.ThermometerThe thermometer may be adjusted to the correct temperature if the instrument is out of calibration. This is done rotating the screw or small slot area on the back of the thermometer until the pointer is at the appropriate position on the scale.HygrometerThe hygrometer indicates the humidity of the room that it is in. We recommend that the hygrometer is calibrated at least once a year. To do this, wrap the entire instrument in a real moist towel for 30 to 40 minutes. Remove the towel and the hygrometer should indicate 98-100%. If this is not the case, the instrument can be calibrated to that reading by turning the adjustment screw or slot on the backside of the hygrometer. After calibrating the weather station will slowly return to normal room conditions and the hygrometer needle will begin to fall, stopping at the correct humidity reading for the room
Question: Where is this made
Answer: Made in Germany

Lockdown Vault Hygrometer Silver, 4.5 Inch x 1.25 Inch x 7.25 Inch

Lockdown

Based on 728 reviews Check latest price

Product description

Managing humidity is critical to protecting and preserving the condition of your firearms. The LOCKDOWN Hygrometer provides accurate relative humidity readings at a glance. Excessive moisture in a vault or storage area can cause rapid corrosion and pitting on metal surfaces. It is important to monitor and control the relative humidity in your storage area to be sure your guns are properly protected.

  • Mounts easily with included fastener and/or hook & loop
  • Large easy to read numbers
  • Monitor the humidity level in your vault

User questions & answers

Question: May I use this model in the refrigerator or freezer? Thanks
Answer: I would not use this product in a refrigerator or freezer. The condensate as a result of outside room temp air coming into contact with the chilled refrigerator air will cause corrosion on the unit and not allow it to function properly. The same result will occur in the freezer with frost.
Question: will this fit into an acoustic guitar soundhole
Answer: Yes
Question: Doesn’t work if it’s laying flat or does it have to be mounted on a wall
Answer: I have mine mounted on the side on my cabinet but I do not know why it would not work lying flat.
Question: can it be used outdoors
Answer: This item was NOT designed to be used in large outdoor spaces - it was designed to help control humidity in a small contained area.

Product features

LOCKDOWN Vault Hygrometer - 222111

Managing humidity is critical to protecting and preserving the condition of your firearms. The LOCKDOWN Hygrometer provides accurate relative humidity readings at a glance. Excessive moisture in a vault or storage area can cause rapid corrosion and pitting on metal surfaces. It is important to monitor and control the relative humidity in your storage area to be sure your guns are properly protected.

Large Easy to Read Numbers
Fastener and/or Hook and Loop Setup
Accurate Relative Humidity Readings 0%-100% Inside Safe

La Crosse Technology 302-604S Silver Indoor Digital Thermometer & Hygrometer Station with MIN/MAX Records & Comfort Level icon

La Crosse Technology

Based on 331 reviews Check latest price

Product description

Stylish tabletop thermometer with humidity will add some flair to any room. Battery operated 2-inch LCD shows current temp and humidity. Manual 12/24-hour time and will record MIN/MAX values. Comes in a variety of colors. Includes CR2032 battery to operate. Tableside or wall hung.

  • Indoor temperature (Degree F/Degree C)
  • Indoor humidity (Percent RH)
  • Min/max value records
  • Comfort level icon
  • 12/24-Hour manual set time

User questions & answers

Question: Does the min/max temperatures reset every day or are they permanently retained until they are manually reset
Answer: The min and max are retained until manually reset according to the manual.
Question: Just received my thermometer and it says it is 70 degrees here at my computer. My fingers and nose are cold. Is there a way to calibrate
Answer: Yes, If your thermometer is a unit used for cooking, boil some water and stick the unit in the water to see what it reads. water boils at 212 degrees. On the cold side put some ice in a cup ( more ice than water) should be about 34 or so degrees. If this is a weather temp unit you can still do the cold test. Good luck
Question: can anyone tell me the minimum and maximum temperatures this can read
Answer: I am not sure what the limits are. I would assume it is the same as the temperature range. I love mine!
Question: How quickly does this register a room temp
Answer: I can't tell you. Mine displays a temp constantly. I don't know how quickly it displays a change or how long it takes to get to the current temperature. I have nothing to compare it to.

Product features

La Crosse Technology 302-604S Indoor Temperature & Humidity Station, Silver

The Indoor Comfort Level Station is an ideal measuring instrument for checking room ambient conditions. Comfort level icon registers a happy in optimum conditions (40-60%.) Checking indoor temperature and humidity can help achieve a comfortable and healthy living environment and may even save you heating costs. A perfect accent piece for any decor!

HONEYPUFF180ML Aluminum Stash Jar With Thermometer & Hygrometer Airtight Water Proof/Smell Proof Aluminum Herb Container Bottle (Silver)

Based on 194 reviews Check latest price
  • Stash Jar.Smell/Water Proof, Smell Proof Container.Airtight.Keep your herbs fresher longer.It offers optimal protection against the harmful effects of light.
  • Made of high quality aluminum.2 Solid Aluminum milled canisters will offer a shell of complete herbal protection. BIG enough to store whatever items you need but small enough for discreet travel.
  • Diameter : 62 MM / 2.44Inches, Height : 85 MM / 3.35 Inches, Capacity : 180 ML , Big Size !
  • With Thermometer & Hygrometer, The stash jar allow you to monitor and adjust the moisture percentage in any natural food or material. They are ideal for monitoring your partially dried herbs, fruits, and vegetables and to made adjustments to raise or lower the moisture content as needed. Use them for storing and/or assist in the curing process!
  • KEEP HERBS FRESH - Airtight, smell proof seal will keep your herbs, spices, coffee grounds, and teas fresh for months! The food grade seal is smell proof and air tight. Locking the smell inside.

User questions & answers

Question: How much bud can this hold
Answer: ABOUT A HALF OZ
Question: made in USA
Answer: No...China.
Question: How do i adjust this product? The set screw is off center and no accessable with a small screwdriver
Answer: NO clue, I've been testing mine with calibration equipment for the past week or so and the humidity reading is about 12% high, I'm going to put regulation packs in it and see how it does at what is supposed to be a standard 62% humidity...

Prestige Import Group Distinctive Watch Style Bezel & Case Thermometer Hygrometer for Humidity & Temperature Monitoring with Digital LCD Display Gauge - Silver

Based on 8 reviews Check latest price

Product description

This new to market watch bezel style silver digital hygrometer is something you do not see every day! The watch bezel and case are done in a stunning silver chrome reflective finish throughout and looks fantastic in person. Features rivet style screw detailing around the edge of its bezel, a multi-colored easy to read gauge and a calibration feature to adjust displayed humidity values for improved accuracy.

Minimum and maximum temperature and humidity values are recorded and stored to memory so you can easily keep tabs on your environment. Cigar lovers can monitor their smokes through this hygrometer's digital display! Relative humidity and temperature are clearly shown through an easy to read screen. Toggle between current temperature in Celsius or Fahrenheit. Includes a battery and mounting magnet set to secure to the interior of your humidor.

This unit has been a hit the instant we introduced it. Pick one up and see for yourself!

  • Order is for 1 Piece | Color: Gold | Model: Watch Case Style Digital Hygrometer
  • DESIGN: Unique watch case style body with bezel finished in a stubbing silver chrome reflective finish throughout and looks fantastic in person. The edge of its bezel features an accented rivet screw design detailing in the same matching finish. Can be mounted almost anywhere using the adhesive back mounting plate
  • GAUGE: An easy to read multi-colored digital LCD screen that displays relative humidity and temperature. Temperature measuring range: -58℉ to 158℉ (accuracy: +/- 2%); Humidity measuring range: 10%-99%RH (accuracy: +/-5% RH (Normal range))
  • FUNCTIONS: Toggle between current temperature in Celsius or Fahrenheit. Minimum and maximum temperature and humidity values are stored until reset so you can easily keep tabs on your environment and a calibration feature to adjust displayed humidity values for improved accuracy.
  • USABILITY: For indoor applications like wine rooms, patios, humidors, closets, and environments that you want to monitor humidity and temperature | DIMENSIONS: Overall Width: 2.76"(70 mm) | Overall Height: 2.25"(57 mm) | Overall Thickness" 0.6"(15mm)

User questions & answers

Question: What em I missing? Cannot adjust it past
Answer: Hello Jeffrey, Uncertain what process you followed. I would recommend these steps to isolate if the unit is not working as expected. Purchase an 84% boveda pack (small) and put the unit and the boveda pack together inside a ziploc for 3-5 days. Make sure it's away of direct sunlight as well as air vents (heat/cold) as this can impact the results. The hygrometer should give you an accurate result +1 -1. Use the buttons in the back of the unit to adjust the number. If I recall correctly the unit allows for +10 -10 . If after following all this process your unit is still not performing as expected then reach out to the seller for a return/replacement.

12 Inch Silver Aluminum Frame Wall Clock with Thermometer Hygrometer Battery Operated Silent Movement Decorative for Home

Boucoln

Based on 27 reviews Check latest price

Product description

A simple yet number look with a silver aluminum frame and a traditional circular contour. Boucoln  wall clock adopts a refined quartz movement that helps you keep track of time more accurately. Large black numbers and hands in white background and front clear glass cover guarantees perfect view, even from a distance. 



SPECIFICATION

Color: White

Material: Aluminum Frame + HD Glass + Plastic

Dimension: 11.8"x 11.8"x 1.7 "

Movement Type: Sweeping

Power Source: Battery Powered

Battery: 1 x AA (not included) 



PACKAGE INCLUDES

1 x Hook

1 x Boucoln 12 Inches Aluminum Wall  Clock 



NOTE

LIFETIME after-sales service!

ONE-YEAR FREE replacement or refund!

If you have any issue, please feel free to let us know and we are ALWAYS behind our products. Thank you for your support. 

  • 【Silent Movement】Quiet sweep and precise quartz movements to guarantee accurate time, ensure a good sleeping and working environment.
  • 【NOTE】Temperature and humidity gauges on a wall clock are not as accurate as professional meters. We don't sell the two gauges but only see them as decorations to the clock dial.
  • 【Brushed Silver Frame】Size: 11.8" in dia. x 1.7" thick with bright frame. Brushed aluminum frame adds style to any decor.
  • 【Easy to Use】Hooks included with the clock which ensures easy installation. Powered by 1 AA battery(Not included), Brand New battery can last about 1 year.
  • 【Full Satisfaction Guarantee】One year manufacture warranty. If you are unhappy with this clock for any reason, contact us for a full refund or replacement.

The Accuracy 2.0 - Digital Hygrometer/Thermometer - Silver Finish - Inside Diameter: 2 5/8" - Outside Diameter: 3" (Silver Finish)

H&H

Based on 2 reviews Check latest price

Product description

The Accuracy 2.0 hygrometer uses the precision of a modern digital technology with the aesthetic appeal of an analog hygrometer, featuring an advanced humidity sensor that maintains accuracy to +/- 1%.

Product Features:

-Humidity and Temperature Reading

-Track Min./Max. Values

-Fahrenheit/Celsius Reading

-Calibration

-Use 2 AAA Batteries (not included)



First thing First:

To get started you need to insert 2 AAA batteries in the battery tray. The system will initiate to measure the humidity and temperature using as default Fahrenheit degrees.

Install the device on your humidor in a place where air circulates freely. Avoid corners or places where air is being blocked.

You can use the device to replace existing hygrometer if dimensions are the same, otherwise you can use a magnetic mount or Velcro sticky mount to place it in the humidor walls. Please, allow the adhesive plate to dry for 24 hrs. before attaching the hygrometer.

Fahrenheit vs Celsius

To switch the temperature measures between Fahrenheit and Celsius press the °F/°C/CAL switch once. Press it again to switch reading back.

Tracking Max./Min.

This hygrometer has the capability to record the max. and min. values of humidity and temperature allowing you to know how stressed was the environment for a determined lapse of time. Press the switch MAX/MIN once and it will show the maximum values, press it twice to show the minimum. If you press and hold this switch for 5 seconds the system will reset the max./min. values. Replacing batteries will also reset these values.

Calibrate the Device

To calibrate the device you need to press and hold the °F/°C/CAL switch for 3 seconds. After that you will need to use the MIN/MAX switch to adjust the humidity to the desired values. The adjustment ranges go from +/- 6%.

  • Modern digital technology with the aesthetic appeal of an analog hygrometer
  • Featuring an advanced humidity sensor that maintains accuracy to +/- 1%
  • Track Min./Max. Values
  • Humidity and Temperature Reading
  • Use 2 AAA Batteries (not included)

Analog Hygrometer HYG-75S Polished Silver Finish Hygrometer

Hygroset

Based on 44 reviews Check latest price

Product description

The Analog Hygrometer has an attractive polished silver finish and it's a must-have item for cigar lovers. The humidor hygrometer is covered by a glass front. It's accurate, reliable, and easy to use and install. The perfect instrument for measuring humidity. Dimensions (Outside): 1 3/4"

  • Attractive Polished Silver Finish
  • Glass Front
  • Accurate and Reliable
  • Easy to use and Install
  • Analog Humidor Hygrometer

User questions & answers

Question: why is there a magnet on the back? can i cover the hole on the back and have it still work right
Answer: Hello!It has an adhesive and magnetic backing that allows for easy installation and custom placement. Also the back hole can indeed be covered and the unit will still function properly.
Question: Is the ring finish shiny/chrome-like or brushed
Answer: It is a shiny chrome finish.
Question: Am I supposed to remove the plastic/rubber ring around the hygrometer
Answer: No it is not required. That rubber is to be used as a seal when you are useing it as a replacement for a front mounted hygrometer application
Question: What is the back diameter of the hygrometer gauge (for insertion in a hole
Answer: There is a sort of inner dimension that I get to be 39 millimeters in diameter, and there is an edge And it would work to insert that part of it into a hole. But the rest of it would stick out, because it is getting increasingly wider closer to the front of the gauge. Hope I understood your question correctly.

Latest Reviews

View all