12 best hybrid inverters

Product description

5000W Solar inverter pure sine wave for Off-Grid System.

This is a multi-function inverter, combining functions of inverter, solar charger and battery

charger to offer uninterruptible power support in a single package.

The comprehensive LCD display offers user-configurable and easy-accessible button

operations such as battery charging current, AC or solar charging priority,

and acceptable input voltage based on different applications.

This inverter can power various appliances in home or office environment,

including motor-type appliances.such as tube light, fan, refrigerator and air conditioners.

Not suitable for 110v sysytem.

• Solar inverter for 48V Lead-Acid and Lithium: Smart battery charger design for optimized battery performance, compatible with the electrical grid or generator power. Perfect backup power supply for off-grid system like home appliances and personal computers.
• Multi-function 5000W 230V Solar charge inverter,combining 80A mppt solar charge controller(Advanced MPPT technology Charging with an efficiency of 99.9% )and 5000W pure sine wave inverter in one machine.
• The comprehensive LCD display offers user-configurable and easy-accessible button operations，and intelligent variable speed fan to efficiently dissipate heat and extend system life.4 charging modes support: Utility first, Solar first,Solar& Utility and Battery & Solar.
• Hybrid inverter with 80A controller offers multiple protection: Overload / Over temperature/ short circuit protection, with cold start function,and automatic restart while AC is recovering to well protect your system.
• Multiple communication ports for BMS (RS485, CAN-BUS, RS232), Integrated Bluetooth for Android mobile monitoring (requires app), USB OTG function, darkness filters

User questions & answers

Question:	So what is the minimum and maximum volt/watt panel I can use on this controller
Answer:	Yes, each solar panel is for 12v, when you make them in series, it will charge your 24v batteries. Thank you.
Question:	Will it support wind and solar at the same time
Answer:	I disagree with the other answers that feel a 30 Amp controller will work. That answer is only valid if using a series connection, and your controller can handle the higher voltage. (4*20VDC=80Volts). (The PWM controllers can’t deal with this voltage. You must go with a MPPT controller if you want to series connect 4 panels.) ON THE OTHER HAND... If using a parallel connection, those people are only considering the current that gets delivered TO THE CONTROLLER. However, All MPPT controllers will lower the voltage to match your battery while simultaneously increasing the current. So the current can rise from the typical 5.5 Amps per panel up to approximately 9.0 Amps per panel when the battery is low. That would make the current coming FROM the controller TO your batteries about 36 Amps!!! Your 30 Amp controller wouldn’t last very long. So the summary is: Definitely play it safe and go for a 40A MPPT charge controller with a parallel connection. Or use the lower 20/30 Amp MPPT designs with a series connection ONLY! By the way: The PWM controllers will throw away all the voltage above your battery voltage (unlike the MPPT controllers) . This can waste as much as 40% of your solar panels output when your battery is low !!!! (E.g. solar panel puts out 18.5 volts and your 3S lithium battery is at 10.0 Volts. Say goodbye to about 7 to 8 Volts!!! I would stay away from the PWM controllers if you can afford the better MPPT designs.
Question:	Do you have an online instruction manual with full product specifications
Answer:	Junction box built-in 12awg wire
Question:	Can the floating charge voltage be programmed to 58.1 v instead of 53volts? i have a series lithium-ion cells that has a 14.15v max rating
Answer:	For a tropical weather, monocrystalline solar panel will produce more power than polycrystalline solar panel, we recommend to purchase monocrystalline solar panel for a tropical weather area.

Product features

Great back-up power for your off-grid system!Get rid of the trouble of power outage!

This is a built in 80A MPPT controller multi-function hybrid inverter, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package. The comprehensive LCD display offers user-configurable and easy-accessible button operations such as battery charging current, AC or solar charging priority, and acceptable input voltage based on different applications

Features

1.Pure sine wave inverter

2.Configurable input voltage ranges for home appliances and personal computers via LCD control panel

3.Configurable battery charging current based on applications via LCD control panel

4.Configurable AC/Solar Charger priority via LCD control panel

5.Compatible to utility mains or generator power

6.Auto restart while AC is recovering

7.Overload / Over temperature / short circuit protection

8.Smart battery charger design for optimized battery performance

9.Cold start function

10.Removable LCD control module

11.Multiple communication ports for BMS (RS485, CAN-BUS, RS232)

12.Built-in Bluetooth for mobile monitoring (Requires App), OTG USB function, dusk filters

13.Configurable AC/PV Output usage timer and prioritization

Inverter Mode Specifications

Rated Output Power 5KVA/5KW

Output Voltage Waveform Pure Sine Wave

Output Voltage Regulation230Vac± 5%

Output Frequency 50Hz/60Hz Peak Efficiency 93%

Overload Protection 5s@≥130% load; 10s@105%~130% load

Surge Capacity 2* rated power for 5 seconds

Nominal DC Input Voltage 48Vdc

Cold Start Voltage 46.0Vdc

Low DC Warning Voltage @ load < 50% 46.0Vdc @ load ≥ 50% 44.0Vdc Low DC Warning Return Voltage @ load < 50% 47.0Vdc @ load ≥ 50% 46.0Vdc Low DC Cut-off Voltage @ load < 50% 43.0Vdc @ load ≥ 50% 42.0Vdc

High DC Recovery Voltage 62Vdc High DC Cut-off Voltage 63Vdc No Load Power Consumption <50W

Line Mode Specifications

Input Voltage Waveform Sinusoidal (utility or generator)

Nominal Input Voltage 220-230Vac

Low Loss Voltage 170Vac± 7V (UPS); 90Vac± 7V (Appliances)

Low Loss Return Voltage 180Vac± 7V (UPS); 100Vac± 7V (Appliances)

High Loss Voltage 280Vac± 7V High Loss Return Voltage 270Vac± 7V

Max AC Input Voltage 300Vac

Nominal Input Frequency 50Hz / 60Hz (Auto detection)

Output Short Circuit Protection Circuit Breaker

Efficiency (Line Mode) >95% ( Rated R load, battery full charged ) Transfer Time 10ms typical (UPS);20ms typical (Appliances)

Output power derating: When AC input voltage drops to 170V, the output power will be derated.

Charge Mode Specifications

Charging Algorithm 3-Step

AC Charging Current (Max) 60Amp (@VI/P=230Vac)

Bulk Charging Voltage Flooded Battery 58.4 AGM / Gel Battery 56.4

Floating Charging Voltage 54Vdc

MPPT Solar Charging Mode

Max. PV Array Power 5000W

Nominal PV Voltage 320Vdc

Start-up Voltage 150Vdc +/- 10Vdc

PV Array MPPT Voltage Range 120~450Vdc

Max. PV Array Open Circuit Voltage 500Vdc

Max Charging Current (AC charger plus solar charger) 80Amp

Operating Temperature Range -10°C to 50°C

Storage temperature-15°C~ 60°C

Humidity 5% to 95% Relative Humidity (Non-condensing)

PV Module Selection:

When selecting proper PV modules, please be sure to consider the following parameters:

1. Open circuit Voltage (Voc) of PV modules not to exceeds maximum PV array open circuit voltage of the inverter.

2. Open circuit Voltage (Voc) of PV modules should be higher than the start-up voltage.

Output source priority and Charger source priority:

Utility first:

• Utility will provide power to the loads as first priority.Solar and battery energy will provide power to the loads only when utility power is not available.

Solar first

• Solar energy provides power to the loads as first priority.If solar energy is not sufficient to power all connected loads,Utility energy will supply power to the loads at the same time.

SBU priority

• Solar energy provides power to the loads as first priority.If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time. Utility provides power to the loads only when battery voltage drops to either low-level warning voltage or the setting point in program 12.

Charger source priority:

Solar first

• Solar energy will charge battery as first priority.
• Utility will charge battery only when solar energy is not available.

Solar and Utility (default)

• Solar energy and utility will charge battery at the same time.

Only Solar

• Solar energy will be the only charger source no matter utility is available or not.

MPPT Technology

Advanced MPPT technology, with efficiency 90% ~ 93%,Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time, and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method.

Removable LCD control module

With removable LCD control module.If you need longer wire,you can disconnect the original wire and use network cable cat5,cat6 to connect with remote LCD panel communication port.

Via LCD control panel,

• Configurable input voltage ranges for home appliances and personal computers
• Configurable battery charging current based on applications
• Configurable AC/Solar Charger priority

Moblie Monitoring via Bluetooth

Built-in Bluetooth for Android mobile monitoring (Requires App: watch power).

• 3000W Pure sine Wave Inverter 24V DC to 120V /110V AC, built in 60A Mppt charge controlle, is a new all-in-one hybrid solar charge inverter, Fit for 20-32Vdc Lead-Acid(seal, AGM,Gel,Flooded) and Lithium battery. Support Utility/Generator/Solar Charge.
• 24V Hybrid Inverter, applies Advanced MPPT technology Charging with an efficiency of 99.9% and inverter with DC to AC advanced SPWM technology which output pure sine wave power.
• LCD display designand 3 LED indicators for dynamic display of system data and operating status, Intelligent variable speed fan to efficiently dissipate heat and extend system life.
• Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
• Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

User questions & answers

Question:	how do you download the pc software
Answer:	PC software download URL: https://www.amazon.com/clouddrive/share/Qm4mCTcU2n0UPPjzcgAKjP0cvi1KAlnkcCpZaf8I935 The connected PC cable needs to be purchased by yourself, search on Amazon: Type B USB port of USB printer
Question:	What is the parameter for number 37 its not in the manual
Answer:	Which parameter value is on page 37 of the manual? Can you contact us by email? [email protected]
Question:	what is the idle current or no power draw for this unit
Answer:	Self-consumption
Question:	How long can this unit be loaded at peak power without negative effects
Answer:	Dear friend，this Unit can be loaded at peak power about 30 secounds without Negative effects.

Product features

AC mode:

• Rated input voltage:110/120Vac
• Input voltage range: (90Vac-140Vac) ±2%
• Frequency: 50Hz/ 60Hz (Auto detection)
• Frequency Range: 47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz);
• Overload/short circuit protection:Circuit breaker

Inverter Mode:

• Output voltage waveform: Pure sine wave
• Rated output power (W)：3000
• Rated output voltage (Vac)：120V AC
• Peak Power:4500VA
• Output voltage error：±5%
• Output frequency range (Hz)：50Hz ± 0.3Hz；60Hz ± 0.3Hz
• Rated battery input voltage: 24V (Minimum starting voltage 22V)

• Pure sine wave inverter, 24V DC to 220V-230V AC, built-in 50A PWM charge controller. This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger, Support Utility/Generator/Solar Energy.
• Configurable input voltage range for home appliances and personal computers via LCD setting. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
• Overload/ Over temperature/ short circuit protection. Smart battery charger design for optimized battery performance. Cold start function. Compatible to mains voltage or generator power, Auto restart while AC is recovering
• This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.
• Fit for 24V Deep-Cycle Lead Acid Type Rechargeable Batteries (Flooded / AGM /User). Suitable for Mounting on Concrete or other Non-Combustible Surface Only.

User questions & answers

Question:	The inverter mode specifies output frequency：50hz. do you have the same unit with 60hz output
Answer:	The fan is very loud. It will be on when the inverter is charging and under heavy load.
Question:	howdo i get 120/230/ output
Answer:	NO set your battery to start charging when your battery voltage drops below on assign voltage. Dishcharge if battery power is being used on night time that solar source is not available. Solar being used during day time. if solar disappear battery will kick in and if battery drops below assign voltage grid will kick in.
Question:	Is the output voltage of 220V-240V single or double phase
Answer:	IN ANSWER TO YOUR QUESTION, ACCORDING TO THE UNIT MANUAL THE MAXIMUM OUTPUT POWER SURGE IS 3200 WATTS. ITS RATED FOR 3000 CONTINUOUS. I HAVE NOT DONE ANY TESTING AND CANNOT CONFIRM THIS TO BE TRUE. I PERSONALLY WOULD EXPECT 2500 TO 2700 WATTS CONTINUOUS AND CLOSER TO SURGE 3000 MAX. REGARDS.
Question:	What is the output voltage. 120 or230 vac
Answer:	NO.

Product features

Line Mode Specifications

• Nominal Input Voltage: 230V AC
• Low Loss Voltage: 170Vac±7V (UPS); 90Vac±7V (Appliances)
• Low Loss Return Voltage:180Vac±7V (UPS); 100Vac±7V (Appliances)
• High Loss Voltage：280Vac±7V
• High Loss Return Voltage：270Vac±7V
• Max AC Input Voltage：300V AC
• Nominal Input Frequency：50Hz / 60Hz (Auto detection)
• Output Short Circuit Protection：Circuit Breaker
• Output power derating: When AC input voltage drops to 170V, the output power will be derated.

Communication Connection

Please use supplied communication cable to connect to inverter and PC. Insert bundled CD into a computer and follow on-screen instruction to install the monitoring software. For the detailed software operation, please check user manual of software inside of CD.

SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY !!!

Output source priority: To configure load power source priority（Selectable option）

• Solar first：Solar energy provides power to the loads as first priority.

If solar energy is not sufficient to power all connected loads, battery energy will supply power the loads at the same time.

• Utility first (default)：Utility will provide power to the loads as first priority.

Solar and battery energy will provide power to the loads only when utility power is not available.

• SBU priority：Solar energy provides power to the loads as first priority.

If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.

NOTE：

• Before using the unit, read all instructions and cautionary markings on the unit, the batteries and all appropriate sections of this manual.
• CAUTION --To reduce risk of injury, charge only deep-cycle lead acid type rechargeable batteries. Other types of batteries may burst, causing personal injury and damage.
• NEVER charge a frozen battery！！！
• For optimum operation of this inverter/charger, please follow required spec to select appropriate cable size. It’s very important to correctly operate this inverter/charger.
• One piece of 150A fuse is provided as over-current protection for the battery supply.

• ❃【3000W MPPT Solar Inverter】3000W off the grid 48V solar inverter, a combination of 3000W pure sine wave inverter , a 80A MPPT charge controller (Advanced MPPT technology charging with an efficiency of 99.9% ), and UPS function module in one machine. Very suitable for power grid backup power shutdown and application. It is packed with unique features and it is one of the most advanced inverter in the market today.
• ❃【Support 4 Charging Modes & 3 Output Modes】 Four modes charging your battery: Solar first mode; Utility first mode; Charging by Utility and solar; Only solar. Three modes output working fit your load, Solar first; Utility first(Default); SBU Priority. Smart battery charger design for optimized battery performance, work with 48V battery, compatible with the electrical grid ,mains voltage or diesel generator power.
• 【Parallel Operation up to 6 Unit】 Output 110/120V, 60Hz/50Hz can be setting, can operate a wide variety of appliances, could be used in parallel with two different modes, max 6 units work together to support three-phase equipment. Could power AC household appliances or large electrical equipment in travel or work places, it is ideal for supplemental RV power and overnight power or long-time applications, is very suitable for use on roads and remote work locations or wherever AC power is needed.
• ❃【Mobile Phone Remote Monitoring】Supports multiple monitoring methods, the GPRS WiFi 1 module is a plug-and-play monitoring device to be installed in the inverter. Using this device, users can monitor the status of the photovoltaic system via mobile phones or websites anytime and anywhere. The transformerless design provides reliable power conversion in a compact size, pure sine wave inverter ensures our inverter produce power that is as reliable as the power you get from your outlets at home.
• ❃【Solar Inverter Built in 80A Controller Offers Multiple Protection】AC input over voltage protection/AC input low voltage protection /Over temperature protection/Over load protection/ Short circuit protection / Reverse protection/Deep discharge protection, etc. Cold start function,and automatic restart while AC is recovering to well protect your system. We offer our customer service will serve you online 24 hours a day , if any questions, please contact us directly.

User questions & answers

Question:	Does this work with 48V lithium batteries? Does it incorporate a charger
Answer:	Can't Line Mode Specifications: Nominal Input Voltage: 230V AC PWM Solar Charging Mode: System DC Voltage: 48V dc
Question:	In case my lithium battery bank cuts out , could to automatically switch from battery power to mains
Answer:	+/-0.3-0.5HZ
Question:	Will this work off grid and split phase? Does this need Wi-Fi to function
Answer:	50Hz (default), can set it to 60HZ
Question:	I need all electrical data for this product. Where can i find it
Answer:	Surge Capacity: 2 times of rate power(5 seconds)

Product features

3000W Off The Grid Solar Inverter

INTRODUCTION

• This is a multifunctional solar inverter, integrated with a MPPT solar charge controller, a high frequency pure sine wave inverter and a UPS function module in one machine, which is perfect for backup power and self-consumption applications.
• The whole system also need other devices to achieve complete running such as PV modules, generator, or utility grid. Please consult with your system integrator for other possible system architectures depending on your requirements.

Mobile Phone Remote Monitoring

• The WiFi 1 GPRS module is a plug-and-play monitoring device to be installed on the inverter.
• With this device, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere.

Inverter Parameter

• Input Voltage Waveform: Utilily or Generator Input voltage: 120V AC
• MAX AC input Voltage: 150V AC
• Input Frequency: 50Hz/60Hz
• Efficiency: >95% (Rated R load, battery full charged)
• Output voltage regulation: 120VAC
• Rate output power: 3KVA/3KW
• Output frequency: 60Hz Peak efficiency: 93%
• Nominal DC input voltage: 48VDC
• High DC recovery voltage: 56.4VDC
• High DC Cut-off voltage: 60.8VDC

Charging Parameter

• USE Solar energy charge your battery:
• PV Array MPPT voltage range: 60-115V DC
• Max. PV Array Open Circuit voltage: 145V DC
• USE Utility charge your battery:
• Bulk Charging voltage: Flooded Battery 58.4VDC, AGM/GEL 56.4VDC
• Overcharge Protection: 60VDC
• Floating Charging Voltage: 54VDC
• MPPT charging efficiency: 98%
• Charging Algorithm: 3 Step MPPT charge

Package Contain

• 1* Unit
• 1* User manual
• 1* USB communication cable
• 1* Software CD

Four Charging Modes

• Solar first mode: Use solar energy charge your battery, Utility power will charge battery only solar power not available.
• Only solar: Only use solar power charge your battery.
• Charging by Solar and Utility .
• Utility first mode: Use Utility power charge your battery, solar energy will charge battery only Utility power not available.
• NOTE: IF this pure sine wave off the grid solar inverter is working in Battery mode or Power saving mode, only solar energy can charge battery.

Three Output Modes

• Utility first(Default): Utility power your load as first priority, battery power and solar on when Utility not available.
• Solar first: solar energy power your load, battery energy active when solar power doesn't work.
• SBU Priority: Solar power first, then battery power, then Utility.

Silent Without Interference

• Low noise at work.
• So quiet, your neighbors will thank you.
• This makes it ideal for camping, supplemental RV power and any other activity that requires quiet operation.

• Solar inverter for 24V Lead-Acid Smart battery charger design for optimized battery performance, compatible with the electrical grid or generator power. Perfect backup power supply for off-grid system like home appliances and personal computers.
• Multi-function 3kva 110-120V Solar charge inverter,combining 60A PWM solar charge controller and 5000W pure sine wave inverter in one machine.support 6 most single inverter to Parallel Operation .
• The comprehensive LCD display offers user-configurable and easy-accessible button operations，via LCD setting，Configurable battery charging current to suit different applications，Configurable priority of AC/Solar Charger,Configurable input voltage range for home appliances and personal computers.
• Hybrid inverter offers multiple protection: Overload / Over temperature/ short circuit protection, with cold start function,and automatic restart while AC is recovering to well protect your system.
• Intelligent variable speed fan to efficiently dissipate heat and extend system life.4 charging modes support: Utility first, Solar first,Solar& Utility and Only Solar.

Product features

Line Mode Specifications

Input Voltage Waveform Sinusoidal (utility or generator) Nominal Input Voltage 120Vac

Low Loss Voltage 95Vac± 7V (UPS) 65Vac± 7V (Appliances) Low Loss Return Voltage 100Vac± 7V (UPS); 70Vac± 7V (Appliances)

High Loss Voltage 140Vac± 7V High Loss Return Voltage 135Vac± 7V

Max AC Input Voltage 150Vac Nominal Input Frequency 50Hz / 60Hz (Auto-detection)

Low Loss Frequency 40± 1Hz Low Loss Return Frequency 42± 1Hz

High Loss Frequency 65± 1Hz High Loss Return Frequency 63± 1Hz

Output Short Circuit Protection Line mode: Circuit Breaker Battery mode: Electronic Circuits

Max bypass current 40A Efficiency (Line Mode) >95% ( Rated R load, battery full charged )

Transfer Time 10ms typical (UPS);20ms typical (Appliances)

Output power derating:When AC input voltage drops to 95V, the output power will be derated.

Inverter Mode Specifications

Rated Output Power 3KVA/2.4KW

Output Voltage Waveform Pure Sine Wave Output Voltage Regulation 110/120VAC± 5%

Output Frequency60Hz or 50Hz Peak Efficiency 90%

Overload Protection 5s@≥150% load; 10s@110%~150% load Surge Capacity2* rated power for 5 seconds

Nominal DC Input Voltage 24Vdc Cold Start Voltage23.0Vdc

Low DC Warning Voltage@ load < 20% 22.0Vdc @ 20% ≤ load < 50% 21.4Vdc@ load ≥ 50% 20.2Vdc

Low DC Warning Return Voltage @ load < 20% 23.0Vdc @ 20% ≤ load < 50% 22.4Vdc@ load ≥ 50% 21.2Vdc

Low DC Cut-off Voltage @ load < 20% 21.0Vdc @ 20% ≤ load < 50% 20.4Vdc @ load ≥ 50% 19.2Vdc

High DC Recovery Voltage 29Vdc High DC Cut-off Voltage 30Vdc

No Load Power Consumption <50W Saving Mode Power Consumption <15W

Charging Mode Specifications

Charging Current (UPS) @ Nominal Input Voltage 2/10A/20/30A/40/50/60A

Bulk Charging Voltage Flooded Battery 29.2 AGM / Gel Battery 28.2 Floating Charging Voltage 27Vdc

Charging Algorithm 3-Step

Solar Charging Mode

Rated Power 1250W Max. efficiency 98.5% Max. PV Array Open Voltage 80Vdc

Operating Voltage Range 30~40Vdc Min. battery voltage for PV charge 17Vdc

Standby Power Consumption 2W Battery Voltage Accuracy +/-0.3% PV Voltage Accuracy +/-2V

Charging Algorithm3-Step

Joint Utility and Solar Charging

Max. Charging Current 110A Default Charging Current 60Amp

Charger source priority: To configure the priority of charger source

Solar first

Solar energy will charge battery as first priority.Utility will charge battery only when solar energy is not available.

Utility first

Utility will charge battery as first priority. Solar energy will charge battery only when utility power is not available.

Solar and Utility

Solar energy and utility will charge battery at the same time.

Only Solar

Solar energy will be the only charger source no matter utility is available or not.

Parallel Operation in Single phase

Parallel Operation in Single phase

Two inverters in parallel:

Three inverters in parallel:

Four inverters in parallel:

Five inverters in parallel:

Six inverters in parallel:

Support 3-phase equipment

Support:

Two inverters in each phase:

Four inverters in one phase and the rest two inverters for the other two phases

Three inverters in one phase, another two inverters in second phase and the other inverter for the third phase

Three inverters in one phase and only one inverter for each remaining phase

Two inverters in two phases and only one inverter for each remaining phase

Two inverters in one phase and only one inverter for each remaining phase

One inverter in each phase

WARNING: Do NOT connect the current sharing cables between the inverters in different phases. Otherwise,

it may damage the inverters.

Product description

Renogy's 3500W 48V Solar Inverter Charger combines solar charging, AC/generator battery charging, and battery inverting into one convenient solution to take your off-grid system to the hybrid level. Compatible with 48V battery banks, this solar inverter charger gives you the ultimate control with four user-configurable AC/Solar Charging modes and three Load Output modes that can turn your system into an uninterruptible power supply (UPS). Power-packed with the latest MPPT and battery charging technology, you can be sure that the charge controller is capturing maximum solar energy in real-time and using the 120A battery charger to ensure the best system performance. Observe your overall system with the integrated LCD screen, capable of showcasing all input/output system information and identifying any potential errors. This reliable, solar pure sine wave inverter charger has built-in electronic safeguards to protect you and your system. Equipped with multiple features and modes, the Renogy Solar Inverter Charger is a powerful addition to any 48V system!

• 3500w pure sine wave inverter output with 7000w surge—features user-configurable battery charger (120a max), switchable frequencies (50hz/60hz), and an optional power-saving mode.
• equipped with state of the art mppt technology, boasting an efficiency of up to 99%, and a powerful bypass function with ups.
• preset battery modes for 48v agm/sealed, gel, flooded, and lithium batteries. includes a user mode for custom inputs to work with virtually all battery types.
• 4 charging modes: pv priority, utility priority, hybrid charging, and solar only; 3 load output modes: pv priority, utility priority, and inverter only.
• dynamic lcd and intelligent leds provide relevant system information and identify any errors. exhaust ventilation fans allow for excellent heat dissipation, extending the system's life. complete software and hardware protection, including short circuit, over-voltage, overload, and more!
• Power source type: Solar Powered

Product features

Solar (PV) Charging Mode Specifications

Recommended PV Max: 145Vdc (150 VDC Actual)

Battery Charging Range: 40-60Vdc

Maximum Input Power: 4400W

Maximum Input Current: 50A

Utility/Grid Charging Mode Specifications

* Short-circuit protection: Breakers and fuses

* Circuit Breaker Specifications: 40A

* Short-circuit protection: Breakers and fuses

* Overcharge Protection: Yes;Automatically alerts and then turns off charging after1 minute

Product description

Hybrid Series inverter/charger, Mfg# MSH3012M, 3000 watt-120volt-60hz inverter, 12 volt-125 amp charger, with load support. Power loads with both AC power (shore or AC generator) and batteries to run larger loads from smaller generators.

• 3000 watts continuous AC power output
• 120 volts/60Hertz AC
• True enhanced performance

User questions & answers

Question:	Is this pure sine wave or modified sine wave
Answer:	Like all Magnum high end inverters. This is a pure sign wave inverter. Make sure you have lots of battery capability, it is a power hog.
Question:	Does this include a auto generator start or is that option extra
Answer:	The generator start is an optional item. I don’t recall the additional cost but it is fairly minimal. I use a portable Honda EU7000is generator, so that option would not work in my application. But if your genset is built-into your RV, the auto start would be a nice addition. The Magnum Hybrid Inverter system is really superb. I’ve had mine for over a year now, and it works flawlessly.
Question:	Magum mshh3012m dimensions--the description states 17.5 x 55(??) x 14 inches. 55 inches long or type-o?? thanks for your response
Answer:	This looks like what I bought, but the model number on mine is WAS 05156, so it may not be the same unit. The dimensions on mine are 13"Wx14"Hx8"D
Question:	What makes it a "hybrid?".....Is it because it is an inverter & a charger
Answer:	A hybrid inverter will work off grid and also connect to the grid (grid tie) Thansk ML SOLAR

• WiFi Version, 3000W off-Grid 24V Solar Inverter with MPPT charge controller inside. Pure sine wave output 3KW and 80A MPPT charge controller Combine Hybrid Inverter.
• Output 110/120V, 60Hz/50Hz can be setting, can be used in parallel with two different modes, Parallel operation in single phase up to 6 units, or max 6 units work together to support three-phase equipment.
• Li Ion & Lead Acid battery support, AGM, Flooded, User-defined, Lithium able to select. 24V inverter with very detail LCD display allow you know inverter's working satuts and setting in easy way.
• 【Multiple working modes】3 modes output working fit your load and 4 modes charging your battery. Output: Solar energy first, Utility first, Solar and battery energy first. Charging modes: Solar power first, Ultility power first, Solar and Utility, Solar only.

User questions & answers

Question:	Does this work with lithium batteries? 2 12v in series
Answer:	I think they meant to say BMS, which is a Battery Management System. I believe most lithium-ion battery packs have this built in.
Question:	Does it incorporate a charger and if so, what are it's characteristics
Answer:	YES. It built-in a MPPT charge controller, work with 24V battery. MPPT technology, with efficiency 98% max, Max PV voltage support 145Vdc, Fit for Flooded, AGM, GEL battery.
Question:	watt surge
Answer:	Surge Capacity: 2 times of rate power(5 seconds)
Question:	Max Amperage @ 110volt
Answer:	output AC power is 110V, if run two at the same time, can make 220V AC output

Product features

SPF 3000W Hybrid Power Inverter+WIFI Module

• OFF Grid Solar Inverter with MPPT Controller 3KVA
• Fit for 24V battery system.
• Built-in 80A MPPT charge controller.
• Compatible to mains voltage or generator power.
• support parallel, parallel operation up to 6 unit.
• High frequency pure sine wave inverter and a UPS function module in one machine.
• Perfect for off grid backup power and self-consumption applications.
• WIFI/GPRS remote module optional, wifi module allow user monitor the status of the PV system from moblie phone or from website anytime anywhere.

CHARGING MODES

1. Solar first mode---Use solar energy charge your battery, Utility power will charge battery only solar power not available.

2. Utility first mode----Use Utility power charge your battery, solar energy will charge battery only Utility power not available.

3. Charging by Utility and solar.

4. Only solar--Only use solar power charge your battery, no matter utility is available or not.

NOTE:

IF this off grid solar inverter is working in Battery mode or Power saving mode, only solar energy can charge battery.

LINE MODE SPEC

• Input Voltage Waveform: Utilily or Generator
• Input voltage: 120V AC
• MAX AC input Voltage: 150V AC
• Input Frequency: 50Hz/60Hz(Auto detection)
• Efficiency: >95% (Rated R load, battery full charged)
• NOTE: When AC input voltage drops to 95V, the ouput power will be derated.

INVERTER MODE SPECIFICATION

• Rate output power: 3KVA/3KW
• Output voltage waveform: Pure Sine Wave
• Output voltage regulation: 120VAC
• Output frequency: 60Hz
• Peak efficiency: 93%
• Nominal DC input voltage: 23VDC
• High DC recovery voltage: 28.2VDC
• High DC Cut-off voltage: 30.4VDC

MPPT Charge Controller Specification

USE Utility charge your battery:

• Bulk Charging voltage: Flooded Battery 29.2VDC, AGM/GEL 28.2VDC
• Floating Charging Voltage: 27VDC
• Overcharge Protection: 30VDC
• Charging Algorithm: 3 Step MPPT charge

USE Solar energy charge your battery:

• MPPT charging efficiency: 98%
• Max. PV Array Open Circuit voltage: 145V DC
• PV Array MPPT voltage range: 30-115V DC

Safety Instructions

1. Before using this inverter, please read all instructions and caution marks on the unit, understand the batteryies and all sppropriate sections of its user manual.

2. Never wire a frozen battery, make sure your battery is full when connect.

3. Do not disassemble the unit.

4. Be very cautions when working with metal tools on or around batteries.

5. Please strictly follow installation procedure when you want to disconnect AC or DC terminals.

Product description

OPTI SOLAR HYBRID / OFF-GRID is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.( This inverter could not connect directly to a AC 240V/120V split phase power system in USA ) FEATURES Max. Charge Current 70A for 3000VA / 3000W DC 24V ( PWM ) Model Name : SP3000 Initial-P 24 Pure sine wave solar inverter Selectable high power charging current Wide DC input range Selectable input voltage range for home appliances and personal computers Configurable AC/Solar input priority via LCD setting Compatible to mains voltage or generator power Auto restart while AC is recovering Overload and short circuit protection Smart battery charger design for optimized battery performance Cold start function ( This inverter could not connect directly to a AC 240V/120V split phase power system in USA ) APPLICATIONS Residential, Commercial, and Industrial application Please kindly be advised this inverter is only for AC230V(240V) input / AC230V(240V) output AC power system ( This inverter could not connect directly to a AC 240V/120V split phase power system in USA ) Warranty Standard 1 year product warranty 100% quality check before shipment Please kindly be advise that Buyer is responsible for warranty return shipping.

• HIGH-EFFICIENCY HYBRID / OFF-GRID AC230V input / AC230V output
• OPTI SOLAR INVERTER 3000VA 3000W WITH 70A Max. Charger Current (PWM) SERIES
• Note: please be careful this unit does NOT work with AC120v load directly nor can it be used in a "split phase" application.
• This unit was Made in Taiwan by OPTI SOLAR and shall ship from Taiwan Asia

Product description

This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.



Specification:

Model:PS-3K

Type:Inverter

Mains Mode:

Input Voltage: 230VAC / (50HZ / 60HZ, automatic configuration)

Output Voltage: 220VAC / 50HZ

Power: 3000VA / 2400W

Output Short Circuit Protection: Mains mode: circuit fuse / battery mode: electronic circuit

Efficiency (Mains Mode):> 95% (rated load, full battery)

Reverse Mode:

Rated Output Power: 3000VA / 2400W

Output Voltage Waveform: Sine Wave

Output Voltage: 230VAC ± 5%, 50HZ

Maximum Efficiency: 90%

Surge Capacity: 2 times rated voltage 5s

Normal Input Voltage: 24VDC

Cold Start Voltage: 23VDC

Charging Mode:

1. Charging Method: 3-step

Charging Current: 30Amp

Fast charging voltage: 

Flooded Battery: 29.2

AGM / Gel Battery: 28.2

2. Solar Charging Mode

Charging Current: 50Amp

System DC Voltage: 24VDC

Maximum open circuit voltage of solar panel: 80VDC

3. Co-charging of city power and solar energy

Maximum Charging Current: 50Amp

Default Charging Current: 50Amp

Package list:

1 x Host

1 x Connecting Line

1 x CD

1 x English Manual

• ❃ 【Hybrid Inverter】 This is a multi-function inverter / charger, combining functions of inverter, solar charger and battery charger.Configurable input voltage range for home appliances and personal computers via LCD setting
• ❃ 【Current】 Configurable battery charging current based on applications via LCD setting
• ❃ 【Compatible】 Configurable AC / Solar Charger priority via LCD setting compatible to mains voltage or generator power
• ❃ 【Protection】 Pure sine wave inverter has overload / overheat / short circuit protection
• ❃ 【Charger】 Smart battery charger design for optimized battery performance. Cold start function

User questions & answers

Question:	Is there has any warranty on this inverter
Answer:	Am not sure
Question:	Is this unit a grid-tie inverter
Answer:	Yes it is
Question:	what do i have to do to run 120v american appliances with this unit.....The write up says it will work but i am having my doubts now
Answer:	Hello, you need to install a transformer between your electrical appliance and this inverter, if you still have questions, please contact us, we will give you a detailed introduction
Question:	Can I considered it as an inverter charger
Answer:	Yes

Product description

This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

 

Features:

Pure sine wave inverter Configurable input voltage range for home appliances and personal computers via LCD setting Configurable battery charging current based on applications via LCD setting Configurable AC/Solar Charger priority via LCD setting Compatible to mains voltage or generator power  Auto restart while AC is recovering Overload/ Over temperature/ short circuit protection  Smart battery charger design for optimized battery performance Cold start function This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

 

Specification:

Model:PS-3K

Type:Inverter

Rate power: 3KVA 2400W

Battery Voltage:24V

Output Voltage: 220V

Weight: 7950 g / 280.4 oz(approx.)

 

Package list:

1 x Hybrid Inverter

• ♥【Feature】: Pure sine wave inverter. This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Configurable battery charging current based on applications via LCD setting.
• ♥【USE】: Configurable AC/Solar Charger priority via LCD setting Compatible to mains voltage or generator power. Auto restart while AC is recovering.
• ♥【Protection Function】: Overload/ Over temperature/ short circuit protection. Smart battery charger design for optimized battery performance. Cold start function.
• ♥【LCD Setting】: Configurable input voltage range for home appliances and personal computers via LCD setting. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
• ♥【Scope of Application】: This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

User questions & answers

Question:	cuantos paneles solares le puedo colocar a este equipo
Answer:	This is determined by power.
Question:	is this a 60hz output? and is is split 110v input output to 220v? douse it matter if input is in phaze
Answer:	50HZ output , 220input,maximum230v and 220V output, the last question, I don't quite understand
Question:	Cuantos Watts soporta de entrada en paneles solares
Answer:	Total power below 2400w
Question:	Is the "220v output" split phase (so it can be divided into 110V circuits
Answer:	no, can't

Product description

*Notice:

1)     Due to the characteristics of the product and restrictions on transportation conditions, this product is made fororder, produced on demand, and needs to besent to your designated address 10-15 working days after you place your order.Please wait patiently.

2)     The goods will be packed in honeycomb cartons and wooden pallets to ensure thesafety of the products in transit. (If you choose sea transportation, we willpack the goods in full wooden cases.)

3)     We will try our best to send the goods to your address by international express.Please fill in your detailed address accurately when placing the order, Country/ City/Receiver/ Address / Zip code: we not accept PO Box address/ Tel/Mobile:

4)     If your address is not within the delivery range of the express company or remoteareas, we can only transport to your nearest airport, please go to thewarehouse to pick up the goods. 

5)     The price quoted for the product includes shipping costs, but does not includetaxes (may or may not). We will try our best to help you avoid unnecessary expenses.Please cooperate to receive the goods in time.

6)     If you choose to ship by sea, there will be no taxes. But it takes 30 working daysto deliver to your door, if you can stand it.

7)     When you place an order, please let us know the shipping method you have chosenwithin 24 hours. Otherwise we default to air and may incur taxes (taxes arepaid by the buyer).

• 1. This is the latest technology design All in One. 5KW 10240Ah, 3KW 5120Ah, 1KW 2560Ah Powerwall (Include hybrid inverter), this is whole package. Bestsun's Superbattery = LiFePo4 Lithium battery + MPPT Solar inverter =All in One. This Powerwall already include the battery and inverter inside, you just connect with Photovoltaic Solar panel can become a complete solar power system.
• 2. A home battery designed to store your clean energy, so you can use it anytime you want—at night or during an outage. Powerwall can detect an outage, disconnect from the grid, and automatically restore power to your home in a fraction of a second. You will not even notice that the power went out. Your lights and appliances will continue to run without interruption. If you have solar and Powerwall, then solar energy will continue to power your home and recharge Powerwall.
• 3. A self-powered home combines solar energy and Powerwall to independently power your home day and night. During the day, solar panels may produce more energy than your home uses. Powerwall stores that excess solar energy and makes it available on demand, even after the sun has set.
• 4. Bestsun's Superbattery is LiFePo4 Lithium battery for solar and grid energy storage. Also have RS485/RS232 Communication Port, The technology as same as Tesla Powerwall. This configuration already include the inverter inside.
• 5. The advantage of our 5kw Superbattery energy system is that it can expand capacity in parallel. If you need 10KW, just install 2 units will be OK. we also have On and off grid hybrid bidirectional energy storage, please contact with bestsuninfo gmail com for details .

User questions & answers

Question:	Can i use my existing 12v solar panels (8 panels) 100w each for a total of 800w? or does it need 24v? do you sell the solar panels as well in bundle
Answer:	They both are the same unit. MSH4028M is designed for RV, which use generator to charge when your batteries are low. MSH4028Re for your house, which use utility power to charge your batteries when the batteries are low. MSH4024re cost more because it has a automatic breaker system to switch you back to utility power when your needs more than the utility charge to your batteries. I bought MSH4024M to use in my house. it works ok.
Question:	I'm interested, but i don't know about electricity. will it work on the puerto rico electrical grid? in the house i have 110v receptacles y 220v
Answer:	Your batteries must be 24v, however, you can split 12v out by using a step down converter (24 to 12 dc-dc). Running a 24v system is more efficient.
Question:	Is the inverter a pure sine or modified sine? Can this powerwall be used as an off grid system
Answer:	I have a RV unknown if it works for marine.
Question:	Will this work with 110-120v USA system
Answer:	Yes, but the inverter will shut down until you start your generator manually. Basically, generator just charge the batteries and the batteries keep inverter on.