12 best wind charges

Product description

Part 1:Notice

1. Make sure the output voltage of thewind turbine is consistent with the rated voltage of the battery.

2. First connect the positive andnegative poles of the battery, then connect the three-phase voltage output ofwind turbine.

3. Although the controller has takenprotective measures against a variety of possible contingencies, it is stronglyrecommended that users strictly comply with operating procedures to preventsignificant damage to batteries and controllers.

Part 2:Parameter

Model Number:PIKAW600W

Suitable for:0-600W wind generator

Rated operating voltage: DC 12V/24V

Braking voltage:DC15V-30V

Brakes operating current:50A/25A

Static power consumption:8mA

Protection class: Waterproof IP67

Display: LED 

Service for: horizontal axis and vertical axis wind turbines, AC or DC wind turbine

Working temperature and humidityrange:-35℃-75℃

Part 3:Packing

1*wind turbine controller

• 1.(-Wind Turbine controller-): Wind charge controller can be used for 0-600w wind turbine. It helps to control wind generator charge battery automatically. When the battery is fully charged, brake can be taken effect automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can recover to charge battery automatically. So wind controller to protect the wind turbine and the battery.
• 2.(-Automaticity-): This wind turbine controller can auto match 12/24 system. Voltage and current limiting are be controlled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
• 3.(-Connection-): Unique reverse connect protection circuit. For improper operation of positive and negative electrode, user don't need to replace the fuse, only to reset the positive and negative in correct point. Make the whole system will be more reliable.
• 4.(- Good heat dissipation-): Wind generator charge controller use Aluminum alloy shell and Therming Dissipine Structure with good Heat Dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.
• 5. (-Protection-) The fully waterproof protection which grade reach into IP67 above. Charge controller can work steadily even in very humid environment. Also including Lightning protection, automatic over-voltage braking, battery reverse connection and open protection.

User questions & answers

Question:	Does this work with solar panels too
Answer:	Yes, it will work good, if the wind blowes. I have had one for three months and I have only seen it produce a half dozen watts. I have it on a twenty foot pole on a mountain top in the ozarks, it takes a strong wind to get it working. Be sure to have power lines ten times the normal if it is mounted much further than fifty feet from the batteries, because of line resistance and losses.
Question:	Can I hook up a manual brake switch to this control
Answer:	I don't know but I doubt it.
Question:	Could you connect two turbines to one controller
Answer:	yes but this particular controller will not handle any real load
Question:	Would it work with a generator that has only two wires, and how
Answer:	The wind generator is apparently a three phase alternator much like in your car. It has a diode block in the charge controlor, much like a voltage regulator in your car. It has a two wire output, red and black that goes to your battery. Check the polarity before you attach it to the battery, I think the red is positive.

Product features

Waterproof Wind Turbine Controller

Power: 0-600w wind turbine

DC output voltage: DC 12V/24V Auto

The maximum charging current: 50A(12V) / 25A(24V)

Battery charge breaking voltage: DC14.5V±0.3V(12V) / 29V±0.3V(24V)

Wind turbine speed limit voltage: DC14.5V±0.3V(12V) / 29V±0.3V(24V)

Static power consumption: 0.008A

Waterproof grade: IP67

Dual LED indicator

1.Battery indicator:(Green)

Always on, the battery is connected normally.

2.Charger indicator:(Green)

Always on, the wind turbine is charging.

3.Brake indicator:(Red)

Always on, the wind turbine brakes.

Good Waterproof Performance

The waterproof grade of the controller is IP67, which can be used outdoors. The wind controller is small size with light weight, easy to install.

Good Heat Dissipation

Wind charge controller use Aluminum alloy shell and Therming Dissipine Structure with good heat dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.

Product description

The LED indicates the working state of the circuit, simple, intuitive and clear



Note:

Please allow slight error due to manual measurement. Thanks for your understanding.

• Specification: Model: SF-12-24-A Rated battery voltage: 12V/24V Rated wind turbine power: 300W/600W Working temperature range: -35~75℃ Protection type: IP67 Weight: Approx.264g/ 9.3oz
• Widly Application: Wind charge controller is suitable for solar street lamp, courtyard lamp, and killing lamp, small solar power station system, and all kinds of wind power DC power supply system.
• Waterproof:Wind turbine controller adapts comprehensive waterproof protection, not easy to be corrosive and get damaged in humid conditions, more reliable.
• Protective Function:Wind generator controller can automatically identify the voltage 12V or 24V, low-power consumption.With short circuit, overload, anti-reverse protection, full, over-discharge automatic shutdown, recovery and other protection measures.
• Package List:1 × Wind Turbine Controller.

• ★(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 600w solar panels for wind solar street light or home wind solar complementary system.
• ★(-Operational system-): The wind turbine charging part adopts booster MPPT technology, which make it charge continuous and efficiently even in low wind speed.  Stepless unloading function including an external dump-load resistance. Solar panel charging use PWM technology by MOS tube in series.
• ★(-Load working mode-)：Two Loads (DC output) have 4 working models for customer to choose. Second Load model the same as first one automatically.
• ★(-Display mode-): Use a custom LCD screen and four operation keys. Easy to understand, convenient to handle and setting.
• ★(-Protection function-): Reversed charging Protection of solar, over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.

User questions & answers

Question:	Is there a 2000watt version
Answer:	Dear customer, 1. There are two kinds of small wind turbines, one is DC wind turbine, the other is AC wind turbine. 2. If the wind turbine is three-phase AC, the three wires of the wind turbine are the live wire, the zero wire and the ground wire.The three terminals are nonpolar. If the wind turbine is a DC wind generator, Please connect two wires to any two holes. 3. Our booster wind solar controller is easy connect,it can automatic identification 12/24v voltage and can connect 0-800W wind turbine. 4.If you have any question,you can contact us at any time.we will be glad to help you. Best regards PIKASOLA Inc
Question:	why are there 3 wires for the wind turbine
Answer:	that is a resistor. it is not hard to use we set the ones we got to run cem. pumps and call outs we charge the battery with wind and solar
Question:	whats the green tube for?.. im new at wind turbines, i have experience in solar system though. how hard is to connect solar and wind
Answer:	Dear customer, 1.When they reach full charge,our controller can shut off to protect battery over charge.our controller is including dump load. 2.However, please note that your system is 12v. Please purchase our 1000W wind and solar hybrid controller. The 1400w is designed for 24V system voltage. 3.The controller protected function Lightning, solar cells, anti-anti-charge , battery open-circuit , battery reversal , over speed and over-voltage soft automatic brake , overload and so on. 4.Buy the way,our store is main sell power product,eg.wind turbine,solar inverter,wind solar hybrid controller and so on. Best regards PIKASOLA Inc
Question:	I'm using 2 12v 100ah deep cycle agm sla vrla batteries. will this unit shut off when they reach full charge so they do not over charge & over heat
Answer:	If the panels are 48V open circuit, then put them in series, not parallel. In series they'll work fine. The thing to really focus on is the MPPT range, that is to say, what operating voltages does the devices MPPT process like to operate. The voltage floor of mine is about 47V. A 48V (open circuit) is going to have a max power V of prob 40V and that's not enough to run this device. Put your panels in series and now you'll have max power at around 80V and the device will like that. In another issue, be really really sure that this 2000W device is the one you want. It was not designed for N America, it was designed for Europe. So unless you have 3 phase 240V power at your house or business, get the 1000W unit instead. I really tried to make this work, but in the end is was a kludge, so I installed 2x 1000W units that are a much better fit for conventional N. American wired homes.

Product features

Feature

1.Control mode: wind turbine generator mode is MPPT charge function, solar panel mode is PWM.

2.Boost charge: Flexible independent step-up circuit(optional)

3.Protection: Reversed charging Protection of solar, over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.）

Big LCD Display

• Which convenient to browse parameters. Including solar panel, wind turbine, battery and load status. And four operation buttons, easy for user to understand and handle.

Good Heat Dissipation

• Aluminum profile not only sturdy and durable, but also with good heat dissipation performance. Which can make hybrid controller self-cooling by itself.

Well Packing &Clear Manual

• Customized foam packaging to ensure the safety of transportation. Clear and profession manual which make you to use wind and solar controller well and easy.

Product description

Features:



1. The controller can control wind turbines to charge the battery automatically.

2. When the battery is fully charged, brake can be controlled automatically by the interior circuit.

3. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.

2. With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard.

5. Rectification of this controller and braking circuit part has adopted the integration module design, better heat dissipation and reliability than the traditional design.

6. Comprehensive waterproof protection. The protection grade reaches the IP67 above, which enables the controller can steadily work normally in water for a long time.





Specifications:

Model Number: FW03-12

Battery Rated Voltage: 12V

Wind Generator Rated Power: 300W

Brakes Start Voltage: 15V

Brake Recovery Voltage: 13.5V

Display: LED

Working Temperature and Humidity Range: -35~ 75℃

Controller Shell Size: Approx. 100*87*28mm/3.9*3.4*1.1in

Quiescent Current: ≤15 mA

Waterproof: IP67

Connection:

Connect the positive and negative terminals of the battery to the positive (red line) and negative (black line) terminals of the controller, respectively.

Connect the three-phase output voltage of the wind turbine to the three-phase input (green line) terminal of the controller fan, respectively.





Package List:



1 * Wind Charge Controller

• ➤➤➤AUOTOMATIC ➤➤➤-This controller controls the wind turbine to automatically charge the battery.When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.
• ➤➤➤PROTECTION ➤➤➤ -  Voltage and current limiting are be enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery. Unique reverse connect protection circuit. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable.
• ➤➤➤ ADVANCED ➤➤➤ - With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard. Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design.
• ➤➤➤ WATERPROOF ➤➤➤- The comprehensive waterproof protection. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP67 above, even in water can steadily work normally for a long time.
• ➤➤➤ JECTSE ➤➤➤ - Jectse is not just a brand. We deeply care about our customers and about making sure that the buyer gets what they want. We love giving our customers great value and great customer service. We are also here for any questions or comments, so send us a message!

Product description

Mars Rock 1400W Original Factory Intelligent 12V/24V MPPT Booster Wind Solar Hybrid Charge Controller for Off Grid System 0- 800W Wind & 0- 600W Solar Panel With Dump Load double protection(1400W80)Mars Rock Intelligent Wind Solar Hybrid Controller is special designed for hybrid wind solar power system charge for low-power street lamp, monitoring etc. . And it is workable for GEL, Lead-acid battery with full charge and discharge protection. Large size LCD screen is convenient for parameter(from solar, wind and battery) query but low power self-consumption. It can be flexibly installed in cruise ships, RVs, and land indoors. Powerful functions and light size but very good heat dissipation are its outstanding features. Perfect Protection Solar Reversed Charging protection，Battery open circuit protection、battery anti-reverse connection protection protection、Over current and over voltage auto brake protection、Over load protection,etc.Main Parameter 1.System Voltage:24V(Remark: 12/24V auto identify battery voltage. But Wind<300W, Solar<200W, suggest match 12V battery)2.Solar Panel:Voltage: 18-32VDC;Workable Power:0-600W; Current:20A(max)3.Wind Turbine:Voltage: AC24V/ DC41.6V; Workable Power:0-800W; Current: 26.7A(max)4.DC Load:24VDC/30A(15A*2)5.24V BatteryCharging:46.7A(max); Over Charge:28.8V; Floating Charge:27.6V;6.Control mode:Wind MPPT (boost )、PWM dump load、PWM Over current  Limiting Working Temperature：-25℃ ~+55℃

• 1. 12/24V auto match for 0-800W wind, 0-600W solar system. Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used.
• 2.In the high wind speed or the Wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the stepless unloading function,protection system of the equipment.
• 3.Discharge part working mode can be set, light control mode, time control function etc, The user can be set up according to the requirements on its own combination.
• 4.Manmachine interface of the controller USES a custom LCD screen and four key operation mode, the user to use simple and easy to use, popular and easy to understand, convenient and quick.
• 5.The controllers with perfect protection function, including: lightning counter-attack, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, etc.

User questions & answers

Question:	Que capacidad de carga se le puede instalar en la salida L1 y en la L
Answer:	sí, ¡ no hay problema! pero la tensión debe estar en DC 12V o 24V. mientras tanto, la potencia de carga debe ser inferior a 100W. Saludos, Kenny
Question:	why does this unit have three inputs for the wind generator? My wind gen has only two cables
Answer:	Dear Sirs, This is very easy to connect wind and controller: 1. To Ac wind, need 3 wires, Any wind wires to connect with any terminal of wind controller. 2To DC wind output is 2 wires(Positive Negative）.you can connect any 2 controller terminals to connect wtih any wire from DC wind. Regads, kenny
Question:	Why does my unit only charge 6.7 amps from my solar system
Answer:	it could be that all the same panels with same voltage and amps that are at 6.7 each are all in series with more voltage with same amps . If you have a lot of panels maybe connecting 2 OR 3 panels with the other 2 or 3 and so on in parallel then in series for more amps but the voltage may be the same . are they in good sunlight , partial shading or are they all the same model or mixed depends on this .
Question:	What size box does this ship in. Need to reship.to.myself overeas
Answer:	mine came in 2 boxes and was kind of big

Product features

Connect Method

Product description

Part 1 : Note

1. Correct connection sequence:

    1） pls connect the wires between battery and controller

    2） pls connect the wires between wind and controller

2. Usable battery:

     This model only used for GEL and lead-acidbattery.If you will connect lithium battery，please buy our upgrade hybrid controller. search"B07Z5QZ6RQ"

Part  2:Technical Parameters

Wind turbine power：0-600W 

Solar Panel power:0-400W   

Charging：41.6A

Control mode: wind turbine generator mode is MPPT chargefunction, solar panel mode is PWM

Boost charge: Flexible independent step-up circuit(optional)

Display: with LCD screen solar charge controller

Equalization charge：14.4V±1%(12V)  or 28.8V±1%(24V) 

Floating Charge：13.8V±1%(12V)  or  27.6V±1%(24V)   

Equalization charge recovery：13.2V±1%(12V)  or 26.4V±1%(24V)   

Temperature Compensation：-24mV/℃(12V)   or  -48mV/ ℃(24V)

Disconnect(DC): 10.8V±1%(12V)  or  21.8V±1%(24V)

Recovery(DC): 12.3V±1%(12V)  or  24.6V±1%(24V)

Shut off(DC): 16V±1%(12V)  or  32V±1%(24V)

Recovery (DC):  15V±1%(12V)  or  30V±1%(24V)

Working Temperature：-25℃~+55℃

Environment humidity：0~90%, No condensation

Production type: Lightning, solar cells, anti-anti-charge ,battery open-circuit , battery reversal , over speed and over-voltage softautomatic brake , overload.

Part 3:Package including

1 pc controller, 1 pc dump load resistor ,1 pc operation Manual ,1 pc extra gift kit

• ★(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind&solar complementary system.
• ★(-Operational system-): The charge controller use PWM technology by MOS tube in series which make solar and wind charge more efficient. Especially MCT charging function tracks the maximum current of the solar panel in real time.
• ★(-Good Heat Dissipation-)：Wind controller use Aluminum alloy shell with multi-edge bottom plate design , which increase the heat dissipation area. So the controller keep in an optimal heat dissipation state for a long time.
• ★(-IP67 Waterproof-): The fully waterproof protection which grade reach into IP67. Charge controller for wind and solar can work steadily even in very humid environment.
• ★(-Protection function-): Over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.

User questions & answers

Question:	What is the antenna looking thing for next to the wires? Also, is there a downloadable pdf manual
Answer:	The wire appears to be a temp sensor. Not sure about manual but the basic diagram on front of unit is sufficient for what I needed.
Question:	What is the small antenna-looking appendage off of the rightside of the cable bundle
Answer:	Temperature sensor
Question:	Can I use 2 24v 240watt panels with 1 400w 12v wind turbine? Or do both the wind turbine and panels have to be the same voltage
Answer:	The voltage need to be the same for the systems to work correctly.
Question:	Was working great, stopped working after big wind storm. panels, battery ok. tried disconnecting and reconnecting. what else to do? thanks
Answer:	Well what i would do is first start testing i would check to see if the controller is bad if you have a different solar and a different wind controller see if the solar and wind are still producing energy if they are you may have damaged that controller and will need to replace 1 thing you might try take off cover and check if there any fuses or breakers have popped or any damaged components inside you won't hurt it any more than it already is then replace any damaged parts then I would consider installing a brake in-between turbine and controller incase you get another storm

Product features

30A Wind Solar Hybrid Controller

Protection Class: IP 67

Max Discharging Current：30 A

System voltage: 12/24V auto match for battery

Wind turbine power：400W(12V)/800W(24V)

Solar Panel power:500W(12V)/1000W(24V)

Wind Generator Braking Voltage:14.5V/29V

Wind Generator Recover Voltage:13.2V/26.4V

Indicator light conditions

1. Battery capacity, discharging indicator(light on indicates the battery condition)

2. Battery charging indicator(light on indicates charging)

3. Controller power-on indicator(light on indicates the battery is connected properly)

4. Brake, fault, overcharge, over-discharge protection(light on indicates warning condition)

5. Wind turbine charging indicator(light on indicates the wind turbine is working)

Good Waterproof Performance

1.The fully waterproof protection which grade reach into IP67.

2.Charge controller for wind and solar can work steadily even in very humid environment.

3.The wind solar hybrid controller is small size with light weight, easy to install.

Good Heat Dissipation

Wind Solar charge controller use Aluminum alloy shell and Therming Dissipine Structure with good heat dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.

Product description

Main Features

♦Intelligent design,simple structure, control powerful,stable performance,safe and reliable products

♦Digital intelligent control, with booster function,MPPT function,make better use of wind energy

♦LCD Display showing visible and intuitive parameters

♦ stepless unloading mode, with free dump load ceramic resistor

♦Various output status setting function,often power / half power / sub-periods,etc.

Specification:

System Voltage：12V/24V

Maximum Input Power: 600W Wind + 400W Solar

Maximum Voltage：＜50V

Even Charge Protection: 28.8V±1%

Floating Charge: 27.6V±1%

Even Charge Recover: 26.4V±1%

Temperature Compensation: -48mV/℃

Control Mode: PWM uninstall function, PWM over-current limiting

Boost Charge: Flexible independent step-up circuit (optional)

Protected Type: Lightning protection, solar cells, anti-anti-charge protection, battery open-circuit protection, battery reversal protection, over speed and over-voltage soft automatic brake protection, overload protection.

Heat Emanation Way: radiator

Working Temperature: -25℃~+55℃

Height: ≤5500m(2000m above the need to reduce power use)

Environment Humidity: 0~90%，No condensation

Package List:

1 * Wind Solar Hybrid System Controller

1 * User Manual

• The complementary wind-solar controller is designed for the wind and solar power generation system, which integrates the control of wind and solar energy.
• Solar charging uses series MOS tube PWM charging technology, which makes the controller's power consumption small and the system more stable.
• LCD screen clearly displays the voltage and electric quantity of the storage battery, this product is artistic, economical and practical. The humanized keys operate function, all of the parameters according to the request of customers in orders to adjust all kinds of using environment.
• In high wind speed or wind turbine power is beyond the reach of the battery and charge absorption, the controller immediately launched the continuous discharge function, the equipment protection system.
• The controller's power supplies use high-quality imported components to ensure excellent controller performance and stability.

User questions & answers

Question:	Everything per directions-battery bank first and then wind turbine wires. there is voltage coming in but charge light is not lit. why no charge light
Answer:	It’s junk send it back... Missouri wind and solar has everything you need and they will actually answer questions and walk you through
Question:	Control won’t charge with wind turbine
Answer:	Junk send the controller back.

Product description

Product Introduction

This model is special designed for hybrid wind solar power system charge for low-power street lamp, monitoring etc. system. And it is workable for Lithium , GEL, Lead-acid battery with full charge and discharge protection. Large size LCD screen is convenient for parameter(from solar, wind and battery) query and adjustment but low power consumption. It can be flexibly installed in cruise ships, RVs, and land indoors. Powerful functions and light size but very good heat dissipation are its outstanding features. 

Perfect Protection 

Solar Reversed Charging protection，Battery open circuit protection、battery anti-reverse connection protection protection、Over current and over voltage auto brake protection、Over load protection,etc.

Parameter 

Model:1400W80BU

Input: 0-800W(wind); 0-600W(solar)

Rated Voltage:24V

(Remark: 12/24V auto identify battery voltage. But Wind<300W, Solar<200W, suggest match 12V battery)

Max current: 58A

DC Input :60V(Max)

DC output:12V/24V(Same as battery)

Output:20A(max)

Control mode:Wind MPPT (boost )、PWM dump load、PWM Over current  Limiting 

• Wind generator MPPT boost charging function.
• PWM dump load of wind, external dump-load resistance, intelligent disconnection of Solar charging.
• Dual power supply function: Battery + solar power supply.
• LCD displays parameters such as voltage and current of wind, solar and load .
• High performance and stable chip control.

Product features

Connect Method

This kind of wind solar hybrid streetlight controller is special design for small off-grid wind solar hybrid generation system. Appearance is elegant, operations are easy. It also makes the course of which wind generator and solar panels charge to batteries safely and efficiently.

Description of Buttons

Set/confirm key

At any browsing interface, press “OK” for more than 5 seconds to enter the setting interface; At any setting interface, press “OK” to next setting item.

Notice: If don’t press any keys within 1 minute, the setting parameters will not save and back to the first browsing interface.

Description of Buttons

At any browsing interface, press “UP” to last browsing item;

At any setting interface, press “UP” to add values, keep press “UP” to add quickly.

Description of Buttons

At any browsing interface, press “Down” to last browsing item;

At any setting interface, press “Down” to subtract values, keep press “Down” to subtract quickly.

Description of Buttons

At any browsing interface, press “Esc” back to first browsing interface,

At any setting interface, press “Esc” to last setting item.

After the all settings is finished, press “Esc” back to the browsing interface and save all the settings.

Browsing interfaces

D/N：The parameter have day and night two modes.

1-load：first load working mode: OFF，S-C: solar control, OPEN、T-C: time control

2-load：first load working mode: OFF，S-C: solar control, OPEN、T-C: time control

S-load：The state of load: Normal, over voltage, over discharge, over current

S-TEMP：The state of controller: Normal, abnormal, protect, high temperature, low temperature

Parameters setting

At any browsing interface, press “OK ” more than for 5 seconds to enter the settings interface.

Press “OK ” to enter the next parameter setting.

Press “ Esc ” to enter the last parameter setting.

When setting parameter flash,

press “Up ” to add the value; keep pressing to add quickly.

press “Down ” to subtract the value; keep pressing to subtract quickly.

After the all setting is finished, press “ Esc ” to save the settings and back to browsing interface .

Parameter Data

System voltage：it display the system voltage what controller read, it can not be set. If it’s not right, please check the connection or reconnect it.

When choose other types，the controller will set the voltage values auto.

Breeze Charging：Independent flexible boost charging circuit can realize the function of breeze charging.

L-ON：The voltage to adjust the day and night. There have 1 minute delay to avoid errors.

L-delay：The load opening delay time (T0_0) in the settings can eliminate the differences between systems. For example, in the street light system, due to the consistency of solar panels and others, it may lead to different lights turn on in different time. Adjusting this parameter can achieve the effect of lighting the street lights at the same time.

Each Output has 4 working modes for users:

1. mode: Function; 2. OFF: Loads off ; 3.Solar control: Light mode, When it’s dark load is on, when it’s dawn load is off ; 4. OPEN : load is always on, and it is working with full power; 5.Time control : Time + Light control mode，When it’s dark the load will turn on and working with setting power.

Three stage can be set, each stage can be set from 0-900m and 0-100%

Once the wind generator brakes, it will have a lasting effect of at least 10 minutes, effectively resisting strong wind.

Product description

Mars Rock 1400W Original Factory Intelligent 12V/24V MPPT Booster Wind Solar Hybrid Charge Controller for Off Grid System 0- 800W Wind & 0- 600W Solar Panel With Dump Load double protection(1400W80)Mars Rock Intelligent Wind Solar Hybrid Controller is special designed for hybrid wind solar power system charge for low-power street lamp, monitoring etc. . And it is workable for GEL, Lead-acid battery with full charge and discharge protection. Large size LCD screen is convenient for parameter(from solar, wind and battery) query but low power self-consumption. It can be flexibly installed in cruise ships, RVs, and land indoors. Powerful functions and light size but very good heat dissipation are its outstanding features. Perfect Protection Solar Reversed Charging protection，Battery open circuit protection、battery anti-reverse connection protection protection、Over current and over voltage auto brake protection、Over load protection,etc.Main Parameter 1.System Voltage:24V(Remark: 12/24V auto identify battery voltage. But Wind<300W, Solar<200W, suggest match 12V battery)2.Solar Panel:Voltage: 18-32VDC;Workable Power:0-600W; Current:20A(max)3.Wind Turbine:Voltage: AC24V/ DC41.6V; Workable Power:0-800W; Current: 26.7A(max)4.DC Load:24VDC/30A(15A*2)5.24V BatteryCharging:46.7A(max); Over Charge:28.8V; Floating Charge:27.6V;6.Control mode:Wind MPPT (boost )、PWM dump load、PWM Over current  Limiting Working Temperature：-25℃ ~+55℃

• 1. 12/24V auto match for 0-800W wind, 0-600W solar system. Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used.
• 2.In the high wind speed or the Wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the stepless unloading function,protection system of the equipment.
• 3.Discharge part working mode can be set, light control mode, time control function etc, The user can be set up according to the requirements on its own combination.
• 4.Manmachine interface of the controller USES a custom LCD screen and four key operation mode, the user to use simple and easy to use, popular and easy to understand, convenient and quick.
• 5.The controllers with perfect protection function, including: lightning counter-attack, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, etc.

User questions & answers

Question:	Will this controller work with lifep04 batteries
Answer:	I see no reason why it will not. I've looked thru the manual and see nothing that would indicate it would not work.

Product description

Specification:



Condition: 100% Brand New

Item Type: Wind Charge Controller

Material: Aluminum Alloy

Protection Grade: IP67

System Voltage: DC 48V

Static Power: ≤15mA

Fan Input Power: 48V ≤ 800W

Working Temperature: -35 °C -70 °C

Applicable Battery: Lead Acid/Gel Battery

Weight: Approx. 274g / 9.7oz

Size: Approx. 9.3x8.4x2cm / 3.7x3.3x0.8in  

LED Indicator Indicating Content Status Function

Green： Fan Charging Indication Off

1: Wind not connect,

2: No wind

On

Wind charging

Red： Fan Brake Indication Off

Controller working

On

Battery high voltage or high temperature





Package List:



1 x Wind Charge Controller

1 x Instruction Manual





Note:



1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.

2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• MPPT boost charging, breeze low voltage can start, sufficient energy, can solve the problem of slow fan speed can not be charged.
• Compared with the traditional PWM charging controller, it greatly improves the charging capacity and the utilization efficiency of the power generation system.
• IP67 protection grade, this controller is dust-proof, waterproof, oxidation-resistant, durable and wear-resistant.
• Heat conductive silicone is used for filling and sealing, which is waterproof, dust proof and circuit oxidation proof.
• With perfect overcharge protection, reverse connection protection, short circuit protection, high temperature protection and other functions, it is more safe and convenient to use.

User questions & answers

Question:	will this work with a 12v system
Answer:	No it for a wind turbine to covert. Over Need one for 12 volt turbine Solar panels are most dc current
Question:	Why do you need a charge controller
Answer:	To regulate the charge going to batteries and auto cut off when it reaches the full amount. This. Is to change ac current to DC current. It is a rectifier. Hope this helps

Product description

Part 1:Note

1. Recommended installation conditions:

    Small wind turbines shouldbe applied in the regions which wind resources is sufficient. The annual average wind speed should be more than 3m/s, the effective wind speed 3-20m/s should be more than 3000h in accumulation per year. 

2. Battery selection:

    Generally, the battery capacity should be equal or smaller than the power from wind turbine generator.

    recommended battery specifications : 400W wind turbine generator  matches 240AH battery(120AHx 2 Pieces)

 

Part 2:Technical Specifications:

1.Wind turbine:

Rated Power:400 Watt

Rated Voltage : AC 12V

Rated Rotate Speed:800 r/min

Start Wind Speed:2.5 m/s

Rated Wind Speed:12 m/s

Cut-out Wind Speed:35 m/s

Blades material: Carbon fiber composite

Generator: 3 phase permanent magnet synchronous AC generator

Generator case: Die-casting aluminum

Control system: Electromagnet

Speed regulation: Automatically adjust windward direction

Working temperature: - 40°C - +80°C

2.Wind controller Description:

Rated Voltage:12V

Maximum Current:50A

Voltage: AC-DC

Battery voltage:12V DC

Brakes start voltage:15v

Brakes start current:30A

Display: LED

 

Part 3:Package list

1 x wind turbine body , 3 xblades,1 x hub,1 set x screw,1 x controller,1 x user manual

• ★ Feature: Starting with Low Speed; high wind energy utilization; low vibration on operation, high efficiency.
• ★ Wind Blade: 23.4inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy generate and more power they produce. Nylon material waterproof, corrosion resistant, lightweight.
• ★Wind Generator: Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.
• ★Rotating Body: With yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle.
• ★Solar&Wind Charge Controller: Match a 30A Hybrid Charge Controller which can extend Max 500W solar panel for 12V wind and solar power system. The controller can help to charge battery intelligently and protect automatically.

Product features

Specifications:

Rated power:400 W

Maximum power:410 W

Number of blades:3

Rated voltage:12 V

Start-up wind speed:2.5 m/s

Rated wind speed :13 m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

Wind wheel diameter: 51.18 inch

High efficiency

1.Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

2. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged.

3.The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.

4.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.

High quality

1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.

2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.

Easy installation

1． Nesting the black leather cushion inside the reducing joint of the wind turbine then putting the tower inside reducing joint. Connecting the cover of reducing joint by screws and fastening. Tightening the screws by hex key.

2． The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.

3． Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

Parameter

Max Discharging Current：30 A

Wind turbine power：400W(12V)/800W(24V)

Solar Panel power:500W(12V)/1000W(24V)

Wind Generator Braking Voltage:14.5V/29V

Wind Generator Recover Voltage:13.2V/26.4V

Product description

Features:

Automatically identifies 12V or 24V voltage, low energy consumption. The LED indicates the operating status of the circuit, simple, intuitive and clear With short circuit, overload, anti-reverse protection, full automatic shutdown, excessive discharge, recovery and other protective measures. Complete waterproof protection, not easy to be corrosive and damaged in damp conditions, more reliable. Wide field of application: suitable for solar street lamp, courtyard lamp and felling lamp, small solar power plant system and all types of wind power DC power supply system.

Specification:

Model: SF-12-24-A

Weight: approx. 264 g/9.3 ounces

Nominal battery voltage: 12V/24V

Nominal power of the wind generator: 300 W/600 W

Working temperature range: -35 ~ 75 ℃

Type of protection: IP67



List of packages:

1 * Regulator for wind turbines



Note:

Please allow slight error due to manual measurement. Thank you for your understanding.

• 【LOW EFFICIENCY 】 The wind generator charge controller automatically identifies the 12V or 24V voltage and the waterproof automatic controller has a low power consumption
• 【PERFECT PROTECTION DEVICE 】 Charge controller for wind turbines With short-circuit overload protection Full automatic shutdown, recovery and other protection measures
• 【WIDE APPLICATION 】 Charge controller suitable for courtyard lamp with solar lamppost and solar power supply system small killing lamp and all kinds of wind power DC power supply system
• 【WONDER WATER PROOFING 】 The automatic water proofing controller has full waterproof protection
• 【INNOVATIVE DEBUGGING】Unique design method The unique and innovative debugging method offers users an easier and faster way to use.