14 best drippers

• Color: Black and Red Material: Plastic
• Connection:1/4-inch barb thread connection, 1/4'' hose, Suitable for 4mm/7mm(Inner/ Outer diameter) tube
• 360 Degree Adjustable:8 spray hole and can adjust water flow rate , also for cutting off the water flow.Great for watering potted plants,For agriculture, lawn, garden sprinkler irrigation drip
• Full open they will cover a 10 to 12 inch circle. Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base
• Making effective use of water:Able to maintain constant when Long laying or pressure fluctuations, irrigation uniformity, slow watering rate allows soil to absorb water more completely in the root zones of plants

User questions & answers

Question:	You can stick them directly in the side of a 1/2 inch hose, right
Answer:	You need a tool which punches a hole into the 1/2" tubbing then you can push it into the tubbing.
Question:	Can these be use as subsurface drip irrigation for lawn covered by dirt
Answer:	NO! These are for drip irrigation for gardens.
Question:	Can these be used hanging upsidedown? I need to water a stripp that already has a 1/2"drip tube about 20"above. Thanks
Answer:	yes they can be used upside down, however i dont recommend them, about 10 percent of the ones i bought didnt work, and some leak at insertion point
Question:	where can i buy the tool which punches a hole into the 1/2" tubbing then you can push it into the tubbing
Answer:	Any place that sells drip irrigation.

Product description

Raindrip PC8050B 2 GPH Pressure Compensating Drippers connect to your main irrigation supply line or at the end of a 1/4” line to customize your drip system to your individual needs. The pressure-compensating design maintains a constant 2 GPH water flow rate and operating pressure from 10-60 PSI over long circuits, hillsides, and uneven terrain. The turbulent flow design virtually eliminates clogging. Made of durable plastic, the dripper is easy to install and can be buried and "ported" up to surface with 1/4" tubing. Raindrip stands by their product and gives a 1 year 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, minus shipping and handling.

• DRIP IRRIGATION ACCESSORY: Raindrip pressure compensating drippers connect to your main irrigation supply line or at the end of a 1/4” line to promote fast and healthy plant growth with less water
• PRESSURE COMPENSATING DESIGN: Turbulent flow design maintains constant 2 GPH water flow rate and operating pressure from 10-60 PSI over long circuits, hillsides, and uneven terrain
• DURABLE PLASTIC: Dripper is easy to install and built to last
• COMPATIBILITY: Can be buried and "ported" up to surface with 1/4" tubing
• SATISFACTION GUARANTEE: Raindrip stands by their product and gives a 1 year 100% satisfaction guarantee

User questions & answers

Question:	Is anyone else experiencing more than 2 gallons per hour with these emitters
Answer:	It depends on what the supply water pressure is. If your house is greater than 60 psi. You may want to consider a whole house pressure regulator. You can also buy an inline hose pressure regulator that drops the pressure to 25 psi. Which is what a lot of irrigation people recommend.
Question:	will this work with 1/4 " ID tubing
Answer:	yes, that is what it is 1/4"
Question:	Once I puncture a hole in the 1/2 inch and plug the green side into the 1/2, can I still run 1/4 inch from the black side
Answer:	No. The Green side plugs into a hole which you have punched into the SIDE of the 1/2" tubing. The black side, which is the drip head itself is still exposed. Since you punched a hole in the SIDE of the tubing, the tubing is still continuous. You can then attach additional drip heads to the continuous tubing. Of course, at some point, you will have to plug the end of the tubing to create pressure inside the tubing. What I find works best is to create a "loop", i.e. route the tubing all the way around the desired area and attach it with a T to the original water source. Don't buy a pressure "regulator." It's just a restrictor to limit water flow which in turn controls pressure. You can do the same thing with an ordinary spigot. Just open the spigot enough to get the dripper flow rate you desire.
Question:	Can these be plugged directly into a length of 1/2” hose without using 1/4” runners
Answer:	You can attach these to 1/4 inch tubing or puncture a hole in the 1/2 inch and plug the green side into the 1/2

Product description

Pressure compensating drippers connect to your main irrigation supply line or at the end of a 1/4” line

• Turbulent flow design maintains constant 1/2 water flow rate and operating pressure from 10-60 PSI over long circuits, hillsides, and uneven terrain
• Size: 50/ bag
• To promote fast and healthy plant growth with less water

Product description

Incredible, fragrant, fresh coffee every time with the Coffee Gator pour over maker.

Hand drip, or pour-over brewing is the simplest and easiest way to guarantee astonishingly good coffee in your own home. With this hand drip coffee pot, the delicate oils and flavorings are trapped in your water as it passes through ground coffee. It stops your coffee stewing and becoming bitter like it does with machine percolators. You’ll be getting the best out of your beans and unlocking stunning flavors you might never have experienced before.

The Coffee Gator brewer is crafted from durable borosilicate glass. It’s laser-cut steel filter can be used time after time. Throwing used paper filters in the trash is a thing of the past. It’s extremely difficult to measure of course, but our customers are convinced this beautiful specimen can actually make you happier. If pushed to put a percentage on it, we’d hazard a guess at around 73-77% happier.

Sadly, at this point in the listing, we’ll have already lost the less discerning coffee drinker. They’ll have hauled themselves into their cars and vacantly wandered into some faceless coffee chain by now. They’ll mindlessly guzzle down their joe. It won’t occur to them to wonder why it tastes bitter and like it was made last Tuesday. We feel for these poor folks, we really do. But what can we do? As the old saying goes; you can lead an absolute simpleton to outrageously good coffee, but you can’t make them drink.

On the other hand, there’s you. The fact that you’re still reading all the way down this long, rambling listing indicates you’re a coffee-drinker of impeccable distinction. You’ve already demonstrated you’re sensible (and good-looking) enough to spot a bargain when you see one. So we’ll leave it there. Be a darling, though will you? Give us a friendly mention on Instagram or Twitter when you’re sat at home drinking the best coffee you’ve had in your entire life.

• More smiles per cup. Baristas agree, pour over brewing unlocks the full potential of coffee. This drip kit is the easiest way to get there. Prepare your taste buds for a flavor fiesta that will leave you grinning like a possum eating a sweet potato
• Get more from your beans. Coffee travels long and far and has the capacity to make you extremely happy. This 14 oz pour over coffee dripper with 100% BPA-free carafe means maximum flavor and minimal effort
• Save time, hassle and the planet. Single-use filters are history. They cost money, strip flavor, create waste and damage the environment. This laser-cut stainless steel mesh filter ensures flavor ends up on your lips - not in the trash
• Everything you want - nothing you don’t. Forget all those nasty dregs getting into your brew. Prepare your senses for a fragrant, naturally sweeter, coffee house-standard brew in your own home
• Peace of mind: first priority is keeping you happy with your purchase; if you have any questions or concerns, please don’t hesitate to reach out and a response will be provided quickly

Product description

Raindrip PC4050B 1 GPH Pressure Compensating Drippers connect to your main irrigation supply line or at the end of a 1/4” line to customize your drip system to your individual needs. The pressure-compensating design maintains a constant 1 GPH water flow rate and operating pressure from 10-60 PSI over long circuits, hillsides, and uneven terrain. The turbulent flow design virtually eliminates clogging. Made of durable plastic, the dripper is easy to install and can be buried and "ported" up to surface with 1/4" tubing. Raindrip stands by their product and gives a 1 year 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, minus shipping and handling.

• DRIP IRRIGATION ACCESSORY: Raindrip pressure compensating drippers connect to your main irrigation supply line or at the end of a 1/4” line to promote fast and healthy plant growth with less water
• PRESSURE COMPENSATING DESIGN: Turbulent flow design maintains constant 1 GPH water flow rate and operating pressure from 10-60 PSI over long circuits, hillsides, and uneven terrain
• DURABLE PLASTIC: Dripper is easy to install and built to last
• COMPATIBILITY: Can be buried and "ported" up to surface with 1/4" tubing
• SATISFACTION GUARANTEE: Raindrip stands by their product and gives a 1 year 100% satisfaction guarantee

User questions & answers

Question:	what water pressure should be used with these droppers
Answer:	Most information seems to be 25 PSI, I'm using them at 30 PSI and they are working without problems.
Question:	How many of these 1 gph drippers can i install onto a 1/2" line at 25psi without slowing down the 1 gph rate
Answer:	Measure the water flow with a big container at the far end of the main line. It is 5.5 Gallon per minute in my situation. So the max water flow is about 330 GPH, about 330 1gph drippers.
Question:	Black is usually 1 gal per hour. What is the flow rate of this totally green dropper
Answer:	2 gallons per hour for the green ones. 1 gallon for the black or blue ones. 1/2 gallon for the red or orange ones.
Question:	can i insert these directly into my 1/2" tubing
Answer:	Yes you can but it is not self puncher type. You'll need to punch hole in tubing first.

• SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).
• PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.
• DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.
• ECO FRIENDLY: Provide water directly where you need it without any overspray!
• EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!

User questions & answers

Question:	Where can I purchase a 1/4” barbed tee that fits into a 1/2” tube plus a 1/4” leak line
Answer:	The box was slim
Question:	What's the attached 'adaptor barb' for
Answer:	That might be difficult, the feet have hard plastic covers, no grip.
Question:	Does the 100pk include the stake?? Do you have to assemble the emitter to the stake
Answer:	Only 3 PCS sets for now. We may develop 5 CPS sets later.
Question:	Hello! Thank you in advance for your answer--do you find that this dripper stops up, plugs up, needs to be twisted monthly to get water running
Answer:	The height of the table is about 28 inches. I think it is perfect for enjoying coffee.

Product features

BOTH BARBED & STAKE EMITTERS ARE ADJUSTABLE!

FLOW RATE: 0-18.5 GPH

DRIPPER ON STAKE COMES WITH ADDED CONNECTOR TO ATTACH 1/4" DRIP TUBING!

EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!

MULTI APPLICATION DRIPPER, INDOOR/OUTDOOR APPLICATION. THE PROFESSIONAL CHOICE FOR HOBBY GARDENERS & PROFESSIONAL GROWERS ALIKE!

Product description

360 degree Drip Emitters Water flow can be adjustable Adjustable flow rate from 0 to 13 gallons-per-hour,Suitable for pots, tubs, ground cover, landscaped gardens and Etc.

• Color: Black and Red Material: Plastic.
• Full open they will cover a 10 to 12 inch circle.
• Has a 1/4-inch barb thread connection, Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube.
• Great for watering potted plants, Able to Maintain constant when Long laying or pressure fluctuations, irrigation uniformity.
• Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base.

User questions & answers

Question:	will the pump continue to drip even if buried. or will it clog up and stop dripping
Answer:	We run ours on a 20 psi drip regulator and they work great !
Question:	What are these rated for PSI wise
Answer:	You should use a pressure reduction fitting to get it below 35 psi. Otherwise, the drip system would come apart from too much pressure.
Question:	How can I figure out what the pressure is in my hose
Answer:	The t-fitting that connects them in the hose.
Question:	What else do you need to install these along the 1/2 inch hose
Answer:	If yours came with the TFV9 Tank Yes it will fit or any 810 drip tip tank.

Product description

PACK SIZE : 50 Pack of Drippers PRESSURE COMPENSATING: Maintains a constant flow rate within a range of pressure Recommended operating pressure : 10-45 PSI QUALITY: Made from high impact plastic UV resistant

• PACK SIZE : 50 Pack of Drippers
• FLOW RATE:
• PRESSURE COMPENSATING: Maintains a constant flow rate within a range of pressure
• Recommended operating pressure : 10-45 PSI
• QUALITY: Made from high impact plastic UV resistant

User questions & answers

Question:	why will water not drip out of green end tried several
Answer:	Works for me
Question:	in-line with 1/4 in. tubing works with these? If so, please specify which emitter would work such as the 1/2 gallon or 4 gallon flow rate
Answer:	The water is dispersed through the green end of this emitter. If you are meaning in-line as in 1/4 tubing on each end of the emitter the water will not leave the dripper.
Question:	Can they be opened (separated into parts) to remove clogs
Answer:	Hello, yes these can be taken apart. They are threaded.

Product description

Rain drip 117025B in-line drip 1GPH 25Bg

• Drippers
• Designed for use on level ground and shorter circuits
• Partially pressure compensating
• Ideal for medium soil and loam
• Black base

User questions & answers

Question:	Are these emitters in-line kind, with both an inlet and outlet along with the emitter? I want to have it on 1/4" tubing to drip & connect to others
Answer:	Yes they are. You can "string" as many and as frequently as you would like along a length of 1/4 inch tubing.
Question:	are these to stick into 1/2 inch line or at the
Answer:	You stick them in the 1/8" line and you can daisy chain them together to put one at each plant.
Question:	Raindrip 11725B is a double barb but I got single barb with the same model on the label. So what’s up
Answer:	25
Question:	How many per package
Answer:	25

Product description

Goege Adjustable Irrigation Drippers Sprinklers Emitter Drip Watering System



Adjustable Irrigation Drippers Sprinklers Emitter Drip System;



Full open they will cover a 10 to 12 inch circle. Automatic cleaning, the starting water erosion flow channel, anti-clogging performance ;



Has a 1/4-inch barb thread connection,Great for watering potted plants ;



Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube Able to Maintain constant when Long laying or pressure fluctuations, irrigation uniformity ;

• Adjustable Irrigation Drippers Sprinklers Emitter Drip System,Automatic cleaning, the starting water erosion flow channel, anti-clogging performance
• Has a 1/4-inch barb thread connection,Great for watering potted plants
• Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube
• Able to Maintain constant when Long laying or pressure fluctuations, irrigation uniformity
• Full open they will cover a 10 to 12 inch circle.

User questions & answers

Question:	What is the adjustable range for gallons per hour
Answer:	Not sure i guess that would depend on the amount of pressure you are using to push the liquid through the feed line.
Question:	how do you adjust gal/hour
Answer:	They twist to adjust the flow rate. I've used these for several years and they work great. You have to check them once in a while though, they can get clogged.
Question:	What is the minimum operating psi for these emitters? i want to use with a rain barrel so it will have very low pressure
Answer:	It could be used as a drip emitter using gravity so i guess 0.
Question:	what size of tube to use for this driper? is 4mm /7mm 1/4 inch
Answer:	1/4 inch

Product description

Specifications:

Size:

Red sprinkler emitter: 13.5 cm /5.3 inch, suitable for 4/7 mm tube

4mm/7mm support stakes:11cm in length, suitable for 4/7 mm tube

Stakes material: PP

Colors: black + red

Quantity: 150 pieces



Package includes:

50 × 4/7 support stakes

50 x adjustable drippers

50 x sprinkler emitters

• Material: our drip irragation system kit is made of quality PP material. solid and durable to serve your long time use, at the same time, it has no energy consumption during working, eco-friendly and cost-effective; suitable for using in vegetable garden, atomization, garden humidification, lawn irrigation, terrace, vegetable irrigation, roof cooling, dust removal and more
• Adjustable red sprinkler emitter: the 8-hole sprinkler emitter can connect with 4mm/7mm drip irrigation tube then give your plants 360 degrees of uniform irrigation, its slow watering makes your plants fully absorb water
• Adjustable drippers: the dripper has the height of 13.5cm/5.3 inches; the water flow can be adjusted by rotating the water outlet cover according to your needs, it can save water while let your plants grow healthily
• Support stakes: the rod is in length of 11cm, easy for you to insert to earth; the support stake helps to prevent pipe clogging and watering plants depending on their location, suitable for strawberries, garden flowers, plants and more
• Package includes: each pack contains 50 pieces of drip emitters, 50 pieces of support stakes and 50 pieces of adjustable drippers; note, these fittings are suitable for 4mm or 7mm tubes

User questions & answers

Question:	Will this work with 1/4 inch drip tubing
Answer:	Yes
Question:	Do you have to have good water pressure? I’m using a water tank with a hose attached, gravity fed
Answer:	wont work mine did not with 35psi. can only have so many on a line

Product description

Adjustable 360 Degree Water Flow Irrigation Drippers, Spray distance from 0 to 20 inch, Suitable for lawn, garden, self plant, vegetable gardens, herbs gardens watering, mass plantings, ground cover, annual flower beds and containers, etc.

• Plastic Irrigation Dripper: these drip emitters are made of quality plastic. Color: Black. The bottom is sharp and easy to insert into the soil. Package Contents: 50 x Drip Irrigation drippers Stakes.
• Size: total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 14mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.
• Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money.
• How to Connect: 1. Connect to the PE pipe directly. 2. Connect to the 4/7 distribution tubing. Tips: Soften the tube hole with hot water before connecting the tube and dripper.
• Wide Application: Suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouse, orchard, lawn, self plant and so on.

User questions & answers

Question:	how many of these would you use in a 20 gallon pot
Answer:	I’m using one in each if my 3 15 gallons, but they’re pretty open at soil level because they’re rose trees. . The flow is adjustable. They were a larger than I thought they would be based on picture and quantity for price. . Certainly no problem if you want to use 3.
Question:	Where do u get the tubing and how much are
Answer:	From web or hardware store.
Question:	Would these connect to half inch tubing
Answer:	The irrigation emitters are designed for 1/4 inch tubing. With the correct fittings, you can connect to 1/2 inch supply tubing.
Question:	gallons per hour at full flow
Answer:	it is adjustable and it depends on the water pressure at the point of drip. Dirt and particles can plug the head up as well, so there is no easy way to figure out.

Product description

✔100% brand new,Sturdy,durable

✔ Dripping and Water spray Dual function ,switched off individually,Adjustable water output

✔Suitable for 4mm/7mm(Inner/Outer diameter) tube

✔with 1/4'' barb thread connection,can easily connect PE pipe and drippers

✔Practical, portable and easy to install

• ✔100% brand new,Sturdy,durable
• ✔ Dripping and Water spray Dual function ,switched off individually,Adjustable water output
• ✔Suitable for 4mm/7mm(Inner/Outer diameter) tube
• ✔with 1/4'' barb thread connection,can easily connect PE pipe and drippers
• ✔Practical, portable and easy to install

User questions & answers

Question:	What plastic are these made from? Is appears to be Polypropylene (pp; number 5 for recycling). Is it
Answer:	There is no number on the item. I will say that this item works much better than most emitters I used that cost a lot more. It can spray out or up or both. The volume of spray is easily adjustable from off to full volume.
Question:	I can't get these to mist, just a straight shot of water out the top. Do yours mist out the top
Answer:	Same here. It just a straight shot of water
Question:	How do you get the peices to fit together
Answer:	1/4” blank tubing, barbed tees and a main distribution line. Watch YouTube video on drip irrigation. It’s not hard to install.
Question:	Maximum gph? Maximum diameter
Answer:	Maximum gph:18.5;Maximum diameter:1800mm/70.8Inch

• Max water flow rate of our drip emitters is 9 gallons-per-hour, suitable for lawn, garden, flower beds, vegetable gardens, herbs gardens, etc. Especially for large garden.
• Height 18cm/7inch, compared to the market, our drip emitters stakes have increased by 2 inches, which will make it more stable to fix in place.
• Spray diameter from 0 to 20inch. Flexible adjustable water flow while using, no matter you want it larger, smaller, or turn off. Our drip emitters can achieve what you need.
• These drip emitters are ONLY suitable for 1/4 inch irrigation tube with 4mm inner diameter, also can be inserted to a 1/2 inch or larger irrigation tube directly. Make sure soak the end of hose by hot water before connecting.
• Common matching accessories have 1/4 inch couplings and barbed tees. These drip emitters are detachable and very easy to clean. Don't worry about clogging.

User questions & answers

Question:	Well i be able to run about 90 of these on 1/2 tube
Answer:	Not a great idea. These will work but only let out a slow drip. Garden hose bib let’s out about 240 gallons per hour max. 50 emitters if balanced would be able to Put out 2 gallons per hour each.
Question:	Do they have an adjustable water flow rate? If so, what is the water flow rate
Answer:	Yes, it is adjustable. The water flow rate is from 0 to 9 gallons-per-hour.
Question:	Can i add 4 one to each corner of my 65 gallon pots to get even watering. I also feed with dry ammendments so im looks for the top soil to get covered
Answer:	You can. These are quite adjustable, from no flow to a lot. The radius of spray will increase with the flow adjustment, so just place them accordingly. I’ve made several “rings” for pots with these and they work great.
Question:	The water is just trickling out of the top and not spraying in the fan pattern when I have them all the open
Answer:	Remove the top and see if the water sprays a full heavy stream.. If it's a trickle you have blockage in the supply line mineral deposits or small stones clogging the line. If you have full pressure the clog is in the top spray head. Check and clear with a thin wire or even a sewing pin.. Should solve the problem... Not too many options to check on these.

Product features

Small Tips:

*How many heads can be installed on a single 1/2 inch line?

This depends on the line pressure, the further from the start of the line the water pressure will drop off. Adjust the flow rate of every emitter to ensure that all of them have water.

*How to add these emitters to my exist watering system?

Create your lateral lines(1/4 inch tubing and couplings) BEFORE hooking them up to the main line. You also can punch a hole in the main line and insert the emitter to it directly.