12 best digital thermostat for reptiles

• ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
• ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
• ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
• ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

User questions & answers

Question:	Is there an instructional video on how to put the temperature controller and heating pad together? Or an instructions pamphlet
Answer:	Hello, you can plug the heating pad to this controller and set the desire temperature, place the sensor to where you want the temperature to be controlled(for example, into the soil) then it should start working. You can find the manual of this controller here: https://centurytimer.com/product_resources/BNQ-T7BH/Instruction-Manuals-for-Web-BNQ-T7BH.pdf
Question:	Can a heat lamp be plugged into it and control the heat like if it was a mat
Answer:	Is this accurate with a heat lamp?
Question:	Is it normal for this to make an audible clicking noise when it turns on? Just got mine set up and it clicks when it turns on
Answer:	Is there anyway to disable that clicking sound? I just got mine today and its right next to my bed so its really irritating clicking on and off every 5 minutes.
Question:	can this be used for 2 che lamps
Answer:	With the wattage and amperage it says it can supply it should easily be able to handle 2 lamps. Just run a strip off the plug and only have them 2 lamps controlled by the thermostat. AGAIN, as long as it will handle what they say it can handle. A 100watt bulb should only pull just under 1 amp.

Product features

BN-LINK Digital Heat Mat Thermostat Controller

BN-LINK Digital Thermostat Controller is your perfect solution to providing constant optimum temperature for a variety of uses. Our thermostat controller has an easy plug-in operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.

Effortless Set-Up

A manual is included with our thermostat controller. But with the simple interface, it won't be needed! Please follow these instructions:

1. Plug in the thermostat controller
2. Press and hold the "Set" button to enter the temperature setting
3. Press the UP/DOWN button to adjust the target temperature
4. Press the "Set" button again to complete the process

**Please note that there is a 2-3 degree buffering zone for the thermostat controller to turn your appliance on again**

Switch Between Temperature Units

To toggle between Fahrenheit or Celcius:

• Press and hold the DOWN button for 3 seconds for Celcius
• Press and hold the UP button for 3 seconds for Fahrenheit

Simply Plug Your Appliance In

Our BN-LINK heating thermostat controller has a simple design for the convenience of our customers. Plug in your appliance and watch our thermostat controller maintain the optimal temperature you've set for your needs.

Keep Your Pets Warm

Maintain perfect temperature control in reptile terrariums and small pet enclosures. Place the temperature probe where the heat source will target and watch your pets stay warm and happy.

Great for Seedling and Plant Germination Projects

Grow with BN-LINK. Our thermostat controller is ideal for maintain rooting temperatures in a tray and dome.

Variety of Uses

Help give your aquatic life a comfortable environment with the help of our thermostat controller.

Easy to Mount

With the mounting holes on the back of the thermostat controller, it allows you to customize your area. Mount anywhere you need the thermostat controller to be.

Product description

A temperature control system designed to be used with a wide variety of other Zoo Med terrarium heaters and cooling fans. The terrarium thermostat features a large LCD and is accurate to one degree Fahrenheit.

• Temperature control range: 50F to 122F. Controls Temperature by turning on heating devices in HEAT mode or by turning on cooling devices (e.g. fan) in COOL mode.
• Remote Temperature Sensor with 6 foot cable.
• Controls up to 600 watts of heating devices. Controls up to 150 watts of cooling devices.
• Built in memory stores settings in case of power failure.
• Alarm flashes and sounds when temperature reaches extreme high or low levels.

User questions & answers

Question:	Can I plug this into an extension cord? The cord is not long enough for where the terrarium is located
Answer:	Yes use a grounded extension
Question:	How long is the the temp probe
Answer:	It’s 6ft long
Question:	This is for 120 volts, right
Answer:	110 120 v common house hold plug
Question:	Does this device have a fail safe? Will it shut everything off if something happens like a malfunction
Answer:	No it will not but you can program a alarm if the temp either gets to hot or cold than your desired temp.

Product description

1. How Pymeter control temperature?

Temperature controller is actual Heating/Cooling controller, thus MUST SET ON-Temp to turn ON Heating/Cooling, and MUST SET OFF-Temp to turn OFF Heating/Cooling.

Heating starts at LOW Temp [ON-Temp(1oN, 2oN)], stops at HIGH Temp [OFF-Temp(1oF, 2oF)], thus for heating MUST SET 1oN(2oN) LESS than 1oF(2oF);

In heating mode, 1oN(2oN) is the minimum temp you allow, 1oF(2oF) is the maximum temp you allow.

Cooling starts at HIGH Temp [ON-Temp(1oN, 2oN)], stops at LOW Temp [OFF-Temp(1oF, 2oF)], thus for cooling MUST SET 1oN(2oN) GREATER than 1oF(2oF).

In cooling mode, 1oN(2oN) is the maximum temp you allow, 1oF(2oF) is the minimum temp you allow.

2. Reading temp is inaccurate?

Every Pymeter controller is calibrated before come out of factory, it is reading temp accurately!

Please don't compare it to common inaccurate thermostat、thermometer or temp gun. If you doubt Pymeter controller accuracy, please calibrate with ice-water mixture (it is 32F when ice is melting), and you will see which device is accurate then.

3. Beeper keeps sounding?

Probably it is the Alarm settings ( AL、AH、d7 ) you set are NOT the right temperature you want. AL is low temperature alarm(it sounds when current temp is AL or Lower), AH is high temperature alarm(it sounds when current temp is AH or Higher), d7 is difference alarm(it sounds when the temp deviation between sensor 1 and sensor 2 is over d7). If you don't need alarm function, please don't change the values of AL、AH、d7, the default values usually won't trigger alarm. You can factory reset by switching temp unit from F to C in setting.

Please download User Manual PDF in Product information.

• ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
• ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
• ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
• ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
• ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.

User questions & answers

Question:	The max temp is 210 Fahrenheit correct
Answer:	Yes, correct.
Question:	How do I change the probes from cool to heating in settings? What buttons do I press in what order
Answer:	Cooling and heating are relevant to the "turn on at 'x' temp" and "turn off at 'x' temp" if it is not working in your preference currently, try switching some measurements in opposites of each other.
Question:	How do we get a "Free New Replacement" as mentioned below
Answer:	Please contact support on www-pymeter .com or send message to us on Amazon directly.
Question:	Can you send me a copy of the instructions? Mine didn’t come with any
Answer:	Sorry for that. Please read/download the instruction via this link: https://www.pymeter.com/PY-20TT-User-Manual.pdf, any further question, just message us on Amazon directly :)

Product features

Pymeter Heating and Cooling Temperature Controller

Pymeter Digital Temperature Controller is easy to use, safe & reliable dual outlets thermostat. It is used as over temperature protection or automatic temperature control system with various electric appliances such as heaters for Reptile, Aquarium, Greenhouse, Home Brew, Fermentation, Accelerating Germination, Plant Grow Tent, Pet Breeding, Incubation, BBQ, Terrestrial Heat Control, Aquarium Cooling Fan, Electric Radiator, Electric Oven, etc.

Advantage compare to other Thermostat:

Parameters

Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F

Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F

Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A

Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault

Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.

Widely Applied

• 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
• 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
• 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
• 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
• 👏👏【Sensor Length 】2m / 6.56ft

User questions & answers

Question:	Does this only do heat? Is there a model that is soley for cooling
Answer:	Yes. It is only do heat and the time. We have one for cooling. It is ITC-308.http://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B011296704/ref=pd_sim_sbs_328_1?ie=UTF8&refRID=00PW2766SPNECBNVYWR0&dpID=417y0W4HFmL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_
Question:	Does this product measure the humidity as well as the temperature
Answer:	Sorry, this ITC-306T cannot measure the humidity. However, we have a combination product that can control temperature and humidity. Pls see the link (https://www.amazon.com/dp/B01N56KEU6). Thanks!
Question:	Do I have to reset it every 24 hours? Or onceset is it good to go
Answer:	Once set, it stays set, even after power outages (of which I've had several since getting mine.)
Question:	Basically I am trying to keep the temperature between 80 and 85 degrees, this includes a heater and fan. How do I set this
Answer:	I initially found the flyer a little difficult to understand, but basically you have to set 2 variables, the target temperature and the temperature differential. So you would set the target temperature to 85 and the differential to 5 degrees. Thus if current tmp >= target - differential it shuts off. If current_tmp

Product features

Specification

• Temperature Control Range：-50~99 ℃，-58 ~ 210 °F
• Temperature Resolution：0.1°F
• Temperature Accuracy：± 2 °F (-58 ~ 160 °F)
• Temperature Control Mode：On/Off Control, Heating
• Input Power：100 ~ 240VAC, 50Hz/60Hz
• Temperature Control Output：Max. 10A, 100V ~240V AC

Packing list

• ITC-306T Temperature Controller*1
• Instructions*1

• COMBO SET - The thermostat have two models now, It will be delivery randomly. Packed with digital thermostat and under tank heater. Reptile under tank heat pad provides your reptile gentle and constant warm 24 hours, and monitors and control the temperature all the time.
• UPGRADED VERSION - Upgraded adhesive material of under tank heat pad is more solid than similar products in the market. It effectively decreases and eradicates the probability of melting and separating.
• MOUNTING - Reptile heat mat with thermostat optional mounting on bottom or side of your terrarium. Rubber feet enclosed for bottom mounting to slight elevate terrarium and allow excess heat to escape. (IMPORTANT)
• SIMPLY SET UP - Heat mat thermostat simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display of seedling heat mat thermostat available in Fahrenheit and Celsius.
• SPECIFICATIONS - Hermit Crab Heater Size: 8” x 6” ; Voltage: 120 volt; Power: 8 watt; Temperature control range is 68-108°F, Digital Reptile Thermostat temperature display range is 32 -140°F.

User questions & answers

Question:	I've had mine for almost a month and it was working fine but now doesn't heat up at all. The work light is on but it never heats up. What can I do
Answer:	Is it plugged in properly? Is the thermostat hooked up and set to the right temps?
Question:	has anyone who actually knows how to use heat pads had any problems? I need one for some belly heat for my ball python during winter months
Answer:	I use this for two Ball Pythons and so leopard gecko and it works well ( make sure you get the appropriate size for your reptiles- my leopard gecko uses a smaller Matt than the snakes) but the thermostat isp really great for monitoring and maintaining temperature one the mat.
Question:	Why isn’t my pad heating up fast
Answer:	I bought the same pad and plugs it in set it to 80 degrees and it wouldn't heat up past 70 I even left it overnight but it didn't work
Question:	Can you apply this to a plastic bin
Answer:	With the included thermostat it would be fine for plastic containers. I use it on my sterilite container with no issues.

Product features

Uniform Heating

24-hour primary or secondary heat source for tropical or temperate reptilian species

Upgraded Adhesive

All Heating Pads are upgraded, we changed the adhesive material to a new one that is more solid.

Easily Installation

AIICIOO Under Tank Heater permanently adhere to your terrarium or incubator, forming a solid bond for optimum heat transfer

Grounded Outlet

Temperature control range: 68-108°F

Temperature display range: 32 -140°F

The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.

Fahrenheit or Celsius readout

Fahrenheit - Press and hold the 'Up' button for 3 seconds to display in Fahrenheit.

Celsius - Press and hold the 'Down' button for 3 seconds to display in Celsius.

Easy to Set Up

Press the UP or DOWN button to adjust the temperature

The thermostat’s LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature.

Product description

"Hydrofarm's Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6' cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat's functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing. ETL certification is proof that a product complies with widely-accepted safety standards. The Jump Start Heat Mat Thermostat is compatible with all heat mats, and is an optional accessory for Hydrofarm Seedling Heat Mats. "

• The only safety ETL certified thermostat on the market
• Provides constant optimal temperatures for germination/rooting
• Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures.
• LED heating indicator light and Digital temperature control
• Controllable range of 68°F - 108°F, Choice of Celsius or Fahrenheit readout (press Up or Down button to change)
• 1 Year Warranty

User questions & answers

Question:	Can I use this product for a dog heat mats (Kane poly heat mat)? Thanks
Answer:	I'm sure you can. I use mine for snake heat mats. Just make sure you put the probe in a place where the dog cant move it. I drilled a hole in the bottom of the enclosure and placed the probe inside, with the heat mat under the cage. The probe reads the surface temperature of the cage floor and not of the heat element. I have 3 of these thermostats and they all work really well for animal heating. They are often a few (+-4) degrees off though.
Question:	How many watts can this handle
Answer:	Manual states: "Do not exceed a total of 1000 watts of heating devices plugged into thermostat."
Question:	I lost my instructions and cannot figure out how to change the thermostat. I have emailed Hydrofarm and had no response. Can someone help me
Answer:	Press and hold down the SET button for at least 3 to 6 seconds. The display will start to blink. Press the up and down buttons to increase or decrease the desired temperature. When you are through selecting the temperature, press and hold down the SET button for at least 2 seconds. I say 3 to 6 seconds because I count manually and I'm sure I am off a second or two. Hope this helps.
Question:	Can I plug 3 heating mats into a power strip and plug the power strip into the Digital Thermostat's AC output
Answer:	I currently have 2 heat mats plugged into a strip that in turn plugs into the Digital Thermostat. Been using this setup for 2 years, with no issues. I love it and believe that it would easily support 3 mats. Keep in mind that my mats and tray are all identical, since there is only 1 prob for the monitor.

Product features

Jump Start Heat Mat Thermostat

Providing bottom heat is one of the most effective ways to improve germination and rooting. Our Heat Mat Thermostat ensures that your plants’ roots enjoy consistently ideal temperatures by precisely controlling and maintaining the heat output of the mat in accordance with the temperature you select.

Jump Start Commercial Heat Mats

For larger projects, use the Heat Mat Thermostat to control our mega-sized, heavy-duty modular Commercial Heat Mats. These mats will provide uniform heat for hundreds of seedlings or cuttings. Rugged, waterproof, and durable, with waterproof connectors. Daisy-chain up to four mats together.

Terrarium Warming

Hydrofarm heat mats are also great for heating terrariums and pet enclosures for reptile, rodent, and arachnid keeping. When used with the Jump Start Heat Mat Thermostat, heat mats can be controlled to provide the precise level of warmth your pets require to flourish.

Jump Start Germination Station

Our Germination Station pairs perfectly with the Heat Mat Thermostat. It’s a mini propagation system that comes with everything you need all in one box—watertight base tray, seedling insert, humidity dome, UL-listed heat mat, and rooting additive. Just add seeds and you're good to grow.

• PROFESSIONAL RELIABILITY AND RESULTS: Regulates and maintains your preferred temperature within a control range of 40–108 ºF（ Temperature display range is 32 -210°F）; perfect for professional horticulturalists or the budding grower. Comes with a sensor probe so you can reliably track the temperature of your plant’s roots
• HIGH-QUALITY CONSTRUCTION: With an easy-to-grip hexagonal shape and made of an extra-fortified plastic, components will not rust or malfunction under tough conditions
• ZERO-EFFORT SET UP & OPERATION: The controller comes with a manual but you won’t need to read it! Using just 3 buttons, you can set a temperature or change the display between Fahrenheit/Celsius in seconds
• USE, HANG, FORGET: Our controller comes with a hanging tab and wall mount along with a convenient angled socket to keep cords untangled and neat. Guaranteed to keep your growing operation perfectly balanced, as all things should be
• COMPATABILITY & SAFETY GUARANTEED: Compatible with any heat mat and ready to plug in to North American outlets. VIVOSUN always stands behind its products and cares for you—if you have any questions or concerns contact our friendly customer service staff

User questions & answers

Question:	Is the probe ok with saltwater
Answer:	Instructions state "do not immerse temp probe in liquid" so no .
Question:	how to switch from °F to °C
Answer:	Hold down on the up and down buttons at the same time
Question:	Is this a thermostat with a mat or does it work with any other mat
Answer:	It is just a thermostat. It works with anything heat outputting, like a heating lamp. The probe senses the temperature and turns the power on or off to whatever you plug into it.
Question:	how many mats can be connected to this
Answer:	There is only one outlet on the thermostat. However, being that the thermostat is rated for 1000 watts, you can connect a power strip and connect multiple heating mats provided you do not exceed the units power rating. Just to be safe, I wouldn't plug in more than half the rated power (i.e. 500 watts). But for those 17 watt heating mats, that's a lot of mats!

Product features

Digital Seedling Heat Mat Thermostat Controller

• The easy-to-grip hexagon controller is made of extra-fortified plastic and high-quality components that won’t malfunction under tough conditions.
• Clear, minimalist display, detailed finishing, smooth edges, and tactile buttons demonstrate the controller’s superior craftsmanship.
• Compatible with standard North American outlets and plugs: the secure-fit 3-prong grounded socket grips plugs tightly.
• Electrical specs: 120 Volts/60 HZ/8.3 max Amps/max Wattage 1,000 W.

Hanging Tab

Hang the controller however you want from the eyelet tab. It can hang flush with the wall or from a variety of hook sizes.

Power Cord and Sensor

Enjoy more installation flexibility with a 5.8FT power cord and 6.4FT probe cord. It is ideal for where you have it located (no where near a plug).

3 Prong Outlet

The angle of the outlet keeps cords from getting tangled. This UL certified 3 prong grouded outlet support a 1000Watt load.

Suction Cup

The adjustable suction cup lets you easily stick the thermostat probe to a wall or terrarium.

Germination Kit

Combined with VIVOSUN thermostat, put the probe into the seed trays. It helped facilitate a 100% germination rate and you will find all your seeds germinated faster then before.

Reptile Warmer

Can be used with VIVOSUN heat mat to make an warm and comfortable growth environment for your reptile even in cold winter.

Fermentation Helper

It is perfect for your set up to keep wine or kombuchat at a perfect temperature. With VIVOSUN thermostat controller,you don't have to make sure its overheating.

• ✓ DUAL OUTLET, DUAL FUNCTIONALITY: Our controller is capable of controlling a heating and cooling device simultaneously
• ✓ SET AND GO: Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
• ✓ PROFESSIONAL GRADE: High-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range. Also features a 71 inch power cord and 71 inch probe cord for flexibility.
• ✓ SAFE & RELIABLE: Our thermostat controller comes with overload protection and is ETL listed. Rated Voltage is 120VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5

User questions & answers

Question:	Can this be used to regulate the temp of a commercial 100 cup coffee maker
Answer:	I've been running my deep freeze as a Keezer for well over a year now, utilizing this method with zero issues. It worked so well that I use a second one on an old fridge to be able to do temperature controlled fermentation. The cooling of the fridge and a homemade low power space heater keeps my fermentation within +/- 1 degree. Perfect for quality brews.
Question:	How do you change to decimal number
Answer:	You can not plug another heat source in the cold socket. When the set temp for heat is reached (plus the degrees of override you set) the cold plug is activated. Until then the cold plug it is dead (Off). You can use a multi outlet splitter for the heat plug side making sure their power requirements do not overload the units 10 amp capacity. You will not have any control of a second volume being heated. The one probe will just turn the heat outlet on and off and everything plugged in to it. It is either or, not both, allowing ten amps to be plugged into each as they will never be on simultaneously.
Question:	Could this be set to turn off a device at 160 F and not turn back on until it got down to 40 F
Answer:	Depending on how many bends & how small the gap is. Probe wire is about 1/8" and flexible, sharp corners not recommended. Does cooler have another way to insert probe inside? Probe is 3/16 in diameter. Flat door seal should work fine.
Question:	What is the warranty on the temperature controllers? wire guage size on cabling? probe cable length? connector type & diameter
Answer:	It is waterproof enough for my freshwater aquarium use, but metal probe does not last 2 years. Mine failed and is off by 4-6 degrees on average but could be off by more than 10 deg. at times which has killed my fishes. I was advised to buy a "thermal well" to protect the metal probe from premature failures. The replacement probes are 30% the cost of the whole unit and be ready to replace it an average of 1 to 1.5 years but as early as 5 months. I have a total of 6 units different models but same probes and 3 failures so far. Hope that helps.

Product features

BN-LINK Digital Heating and Cooling Professional Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding -40-176°F 15A/1875W

BN-LINK Digital Heating and Cooling Professional Thermostat Controller is your perfect solution to providing constant optimum temperature for variety of uses. Easy Plug-In Operation with LED Illuminated Indicator Lights & Dual-Operation Three-Prong Ground Plugs.

Dual Operating Plugs

Waterproof & Accurate Probe

Durable Grounded Plug

Great for Cooling Devices

Duality of the thermostat controller allows you to seamlessly control your cooling devices. Great for fans, cooling pads, and other cooling units. Just set your SV (set value) and your Cd (Cooling Differential Value).

Amazing for Heating Devices

Duality of the thermostat controller allows you to seamlessly control your heating devices. Great for heat pads, heating lamps, and other heating units. Just set your SV (set value) and your Hd (Heating Differential Value).

Professional and Versatile

Plug your heating and cooling devices to maintain a consistent temperature range. Connect your heating device and cooling devices to ensure that your pets, plants, brews (and much more) will thrive in an optimal environment.

Durable and Heavy Duty

Our thermostat controller is durable and long lasting. Built in with a function to allow you to set an alarm when the surroundings are getting too hot or too cold. Our thermostat controller comes with overload protection and is ETL listed. It is also rated 120VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5

• Plug and play design, choose the heating or cooling mode easily. Maximum output load: 880W(110V)
• Easy to use LCD display help program quickly, support Fahrenheit and Celsius display, 0.1 degree temperature adjustment
• Waterproof and accuracy sensor allow it to work in 20%-85% operating ambient humidity with no condensate situation
• Compressor delay available for refrigerator, automatically calculate after the moment refrigeration stops, protect your refrigerator from cycling too fast
• All purposes in one machine, ideal used for multiple occasions like aquarium, reptile, greenhouse, brewing and incubation, ect

User questions & answers

Question:	does it work for saltwater tanks
Answer:	The sensor looks as though it is waterproof but I can't be certain.
Question:	Can I control 2 heat sources with this unit
Answer:	No, not independently. There is only one relay inside controlled by only one micro-controller. The internal relay is 10A (standard) or 16A (optional). You can put two heat sources on the relay output if you ensure you don't exceed the current limitation of the relay that you have.
Question:	Is there any metal exposed on the temperature probe
Answer:	No. It appears to be encased in plastic.
Question:	What are the length of the power cable? and the sensor cable
Answer:	Both the power cable and the sensor cable are three (3) feet long.

Product features

NICREW Temperature Controller

NICREW temperature controller is easy to use. It can be used as over-temperature protection and automatic temperature control system for various electric appliances. Delay protection system is available for protecting cooling equipment cycling too fast. Celsius and Fahrenheit display can be suitable for different reading habits.

LCD Display

LCD shows corresponding lead language, numerical value and icon while you operate the unit step by step. Great help in quick and easy setting according to the LCD display. Fahrenheit and Celsius display can be changed.

Waterproof Sensor

When measuring the temperature, please place the probe completely in the appliance for accurate test while the display is mounted on the outside. In this way, you can easily read the temperature without getting hand wet.

Heating/Cooling Socket

One socket can used for heating or cooling equipment. Heating/cooling differential function could be set for refrigeration or heating to protect temperature controller from violent change. Delay protection is available.

• Variety of uses: heating thermostat for seed germination, rooting, reptiles, home brewing and fermentation to provide a constant custom temperature, so that your environment is maintained within the ideal temperature range.
• Bright and easy-to-read LCD display and work indicator settings make it easy to see the operating status of the thermostat and temperature changes at any time.
• Precise temperature control:The digital thermostat provides temperature control between 41°F and 108°F (5-42°C). Accuracy is ±0.1 degrees, no need to worry about overheating and not meeting your temperature requirements.Digital display supports units in both Fahrenheit and Celsius.
• Quality Assurance:The product has passed UL test. Zacro is committed to providing customers with sincere service and high quality products. Please buy with confidence
• NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment.Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug.

User questions & answers

Question:	does it work (switch on) if the ambient temperature falls below 30F (for example, if a window remains open on a freezing night
Answer:	You can set the temperature for whatever you want, celsius or Fahrenheit.
Question:	whats the warrenty on these
Answer:	I don’t know if there is one
Question:	Getting Err no temp. Anything I can do to clear the error
Answer:	Needs to be warmer. If the temp is not in the range then it says error.
Question:	Can youuse in a grow tent
Answer:	I am actually ordering it right now for that exact reason. I do not see why this wouldn't work connected to a ceramic heat emitter or a heater to keep temps controlled.

Product features

How to set the temperature?

1. To adjust the temperature setting, press and hold "SET" button for 3 seconds to enter the temperature selection mode.

2. To display in celsius, please press and hold "DOWN" button for 3 seconds; press and hold "UP" button for 3 seconds to display temperature in Fahrenheit.

3. Press the " UP" or "DOWN" button to adjust the temperature that you want to set.

4. Press "SET" button again. So the setting temperature is done.

Tips:

* The digital thermostat provides temperature control between 41°F and 108°F (5-42°C). Temperature display range: 32-140 °F.

* Precise temperature control: The accuracy of temperature is ±0.1 degrees.

Specification

Size: 19.8x9.8x9.8cm

Rated voltage: 120V.

Frequency: 60Hz.

Maximum load: 8.3A, 1000W.

Package included:

1* Heat Mat Thermostat

1* Instruction manual

NOTE:

*Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment

*Do NOT immerse the controller or probe in water.

Product description

iPower heating pad thermostat can provide constant customized seed germination, crawling and brewing temperature. It is ideal for maintaining the rooting temperature in the tray and dome. It is very suitable for maintaining the required fermentation temperature in home breeding and is very suitable for temperature control of reptiles and small pets. The heating pad controller is compatible with all heating pads, but optimized for iPower seedling heating pads:

1. Digital temperature controller for heating pad

2. Provide a constant temperature for the living environment of specific crops

3. Specifications: 120V / 60HZ / 1000W

4. LED indicator light and three-hole grounding plug are easy to operate

5. Convenient LED heating and power indicator light allows you to check the status of the controller even in complete darkness

6.Can be used with iPower heat mat to make a warm and comfortable growth environment for your reptile even in cold winter



NOTE:

1. Do not immerse the digital controller or thermostatic sensor probe in liquid or very wet soil

2. Abnormal warning: If the thermostat displays "E1", it means the actual temperature is below 0 ° C or 32 ° F. If the thermostat displays "E2", it means the actual temperature is higher than 60 ° C or 108 ° F. If the thermostat displays "E3", it means the temperature sensor is not working properly, please reinstall the sensor.

Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature



INSTRUCTIONS:

1. To adjust the temperature setting, press and hold the "SET" button for 3 seconds to enter the temperature selection mode

2. To display in degrees Celsius, press and hold the "Down" button for 3 seconds press and hold the "UP" button for 3 seconds to display the temperature in Fahrenheit

3. Press the "UP" or "DOWN" button to adjust the temperature you want to set

4. Press the "SET" button again. This completes the set temperature

• Technical specifications: 120 volts/ 8. 3 Max amps /60 Hz/ 1000 Watts. Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug
• Temperature range: digital thermostat provides temperature control between 40 ° F-108 ° F (5-42 ° C). Temperature display range: 32 -140 ° F (0-60 ° C)
• Applicable occasions: used for seed germination, rooting, reptiles, home brewing and fermentation, providing a constant custom temperature to obtain the ambient temperature you need
• Ease of mind: handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness
• Balanced temperature environment: set the temperature you need to get a uniform ambient temperature, so that your plants or animals are in a comfortable environment

User questions & answers

Question:	How to set temperature tolerance
Answer:	Read instructions
Question:	Is the probe waterproof? Will it rust in water
Answer:	They are NOT made for aquariums submerged in water but the tip is made of stainless steel so rust should not be a problem.
Question:	Will this work with heat lamps
Answer:	No heat mats only.
Question:	If i’m using a heat lamp on my bearded dragons tank, where do i put the prob? on the side of the glass or on the ground
Answer:	Definitely try and put the probe on the bottom of the enclosure, Make sure it's buried in his substrate so he doesn't get accidentally wrapped up in the wire. Also, make sure the wire is taped to the side of his enclosure as tight as possible for the same reason. I use under the tank heaters for my pythons, so trun the probe down the outside of.his enclosure and put.the probe between the bottom of his tank and the heater so there's no chance that he could get wrapped up in the wire .

Product features

Easy to Use

- Fahrenheit Light: It will be lighting when the temperature display in Fahrenheit.

- Celsius Light: It will be lighting when the temperature display in Celsius.

- Heating Light: It will be lighting when the output is working.

Switch Temperature Display

Adjust Temperature Setting

Product Specification

Germination Helper

iPower heat mats work perfectly on starting seed, even for beginners. They increase the success of seed starting by warming the root area 10-20 degree Fahrenheit over ambient temperature. The seeds will germinate better in a warm environment.

Terrarium Warmer

iPower heat mats is also applied in heating the pet terrariums. With the help of iPower Heat Mat Thermostat, the heat mats power can be controlled to provide a accurate temperature for your reptile pets.

DIY Your Brewing

Do you want to DIY a homemade wine? iPower heat mats working with the iPower Heat Mat Thermostat can control the heating for your wine containers to provide an accurate and appropriate temperatures to ferment.

• ✓ [Premium Quality structure]: Made of the extra-fortified plastic, more durable and the ergonomic design is easy to hold by hand. The high-quality components we use inside will not rust. OPULENT SYSTEMS does strict quality control process before shipments.
• ✓[Easy to set up and operation]: Easy to use 3 buttons to set up temperature between Fahrenheit/Celsius according to your using habit. The packaging also includes the professional user instruction with the operation details.
• ✓[High Level Reliability and Result] The temperature control within a range of 68-108 ºF and it is great for the professional gardener and grower to reliably monitor the temperature of your plant’s roots with as sensor probe and get the effective results.
• ✓[Install and use anywhere]: You can hang the controller with flush on the wall or from a variety of hook sizes. Flexibly install with a 6FT power cord and 6.4FT probe cord. The UL certified 3 prong ground outlets ensue the safety. Compatible with any heat mat to plug into North American outlets, it is also a good option to use with OPULENT SYSTEMS heat mats.
• ✓[Top Customer Satisfaction Guarantee] :OPULENT SYSTEMS takes our customers seriously. We guarantee our worry-free 12-month warranty and friendly customer service. Warm Reminder: Please Do not immerse digital controller or thermostat sensor probe in liquid or so wet soil.

User questions & answers

Question:	Can this be used with an incubator
Answer:	I would think so. We have ours on a gecko tank and one on a snake tank. I will say that if the power goes off or flickers you will have to reset the temp on unit. We have been very happy with this product!
Question:	I purchased seven months ago and it just stopped working do you offer a warranty
Answer:	I believe manufacturer offer one year warranty
Question:	Can you plug in two heat mats into this unit at the same time
Answer:	You probably could with an outlet adapter but there is only one heat sensor so would sort of defeat the purpose. The heat mats provide around 110℉-20℉ above ambient.
Question:	Can this be used with a ceramic heat emitter or heat lamp
Answer:	If you mean to supply heat from overheat, it is fine for that use. I'd be more watchful of the plants drying out with extra heat sources.

Product features

OPULENT SYSTEMS Digital Heat Mat Thermostat Controller

• Premium Quality structure: Made of the extra-fortified plastic, more durable and the ergonomic design is easy to hold by hand.
• Easy to set up and operation: Easy to use 3 buttons to set up temperature.
• High Level Reliability and Result:The temperature control within a range of 68-108 ºF and it is great for the professional gardener and grower to reliably monitor the temperature.
• Install and use anywhere: You can hang the controller with flush on the wall or from a variety of hook sizes.

Measure Temperature for Your Plants

For the best growing conditions, you need a thermostat controller. The best temperature range for growing weed is better 68 and 77 degrees F.

Provide Stable Conditions in Your Grow room

You need to provide stable conditions in your grow room. It can ensure that you get maximum harvest out of your farming and you can do this with the best grow room controller.

Safety for Use

Flexibly install with a 6FT power cord and 6.4FT probe cord. The UL certified 3 prong ground outlets ensue the safety

Compatible with Heat Mat

Compatible with any heat mat. OPULENT SYSTEMS is the best choice for growers.