12 best tree pruners

Product description

The Spear & Jackson razor-sharp telescopic tree pruner features a variable length telescopic handle which extends to maximum length of 2340mm. The head of the pruner incorporates a bypass lopper for branches up to 30 mm, The lopper has an Sk5 carbon steel blade which stays sharp for longer & can be presharpened when required. In addition a 330 mm (13”) saw blade is included for use on larger branches. spear & Jackson’s foundations were laid in 1760, Since the beginnings centuries of experience & innovation have resulted in the materials & development expertise that resides within the company; & "continuous innovation" Is at the heart of the company ethos.

• Telescopic tree pruner with SK5 carbon steel blade stays sharp for longer
• Variable length telescopic handle extends up to 234 cm
• Pruner/Lopper function for cutting branches up to 1. 2" (30mm) thick. Supplied with long cord and pull action handle
• 13 inch (33 cm) saw for cutting larger branches
• Extends up to maximum length of 92" (2340mm)
• Part of the Razorsharp Advantage collection, the obvious choice for gardeners who demand and expect precise, powerful performance
• Grow your own Great British growing 2018 Award Winners

User questions & answers

Question:	How long is this
Answer:	10 ft. it is a great tree trimer.

Product features

Razorsharp Telescopic Tree Pruner

The Spear & Jackson Razorsharp Telescopic Tree Pruner features a variable length telescopic handle which extends up to a maximum length of 2340mm. The head of the pruner incorporates a bypass lopper for branches up to 30mm, the lopper has an SK5 carbon steel blade which stays sharp for longer and can be resharpened when required. In addition a 330 mm (13”) saw blade is included for use on larger branches.

Part of the Razorsharp range, our quality cutting range of secateurs, loppers and shears.

Parts Guide

The lopper arrives fully assembled upon delivery. When taking the lopper out of it's package the saw needs manually attaching, which is quick and simple. See step 4 above.

The diagram also shows the locking mechanism, and how to adjust the pole length to reach those branches that are just that bit higher up.

Features & Benefits

• SK5 Carbon Steel upper blade stays sharp for longer
• Variable length telescopic handle extends up to 92" (2340mm)
• Lopper for cutting branches up to 1.2" (30mm)
• 13" (33cm) saw for cutting larger branches

Adjusting Cord Length

Pull the lock to the 'Open' position and the cord can be pulled out of the cleat, as picture

You can then adjust the grip's position smoothly, as picture

To lock handle in fixed position, push the lock back to the 'Lock' position, ensure the trailing end of the cord re-enters the cleat as picture

Product description

Fiskars Pruning Stik Tree Pruner makes it easy to cut high or low with a level of control traditional pruners with exterior ropes can’t match. A long, lightweight pole lets you cut high branches without the hassles and dangers of using a ladder, make low cuts without sore knees from kneeling or back strain from bending and easily reach into dense, prickly shrubs or tight spots. For the reach you need to cut your highest branches, the pole extends all the way to 12 foot and locks securely. The rope-free design means you can use both hands to maximize your power and accuracy, and an easy-to-grip sliding handle makes the pruning action smooth and simple. An actuating ball at the end of the pole lets you reach even farther and still prune with precision, an included 15 inch saw blade makes it easy to take down thicker branches, and the cutting head rotates up to 230 degrees to let you prune and saw at tough angles. The fully hardened, precision-ground blade stays sharp, and a low-friction, rust-resistant coating makes every cut easier.

• Ideal for pruning high branches and reaching tight spaces
• Rope-free design gives you two-handed control and power
• Power-Stroke chain-driven gearing provides maximum cutting power
• Fully hardened steel pruning blade with non-stick coating stays sharp and cuts up to a 1¼" diameter smoothly
• Lifetime warranty

User questions & answers

Question:	What is the wgt of the unit
Answer:	3.8 lb. without the saw. The saw add 0.55 lb.
Question:	How does one operate the shears part of the tool? On other products I see a squeeze handle at the base of the pole. Don't see one here
Answer:	The orange handle on the shaft slides up and down to work the shears. When the pole saw is fully expanded and the orange handle is out of reach, there is real strong nylonish-type cable attached to handle t pull for easy operation of the shears. I find that this gives me more flexibility in my posture which is important when using for extended periods of time. This particular Fiskars tool is awesome = in my opinion the best "medium duty" pole pruner, by far for these reasons. (1) It's FAR LIGHTER than other pole pruners; if you are going to be using a pole saw for more than 15-30 minutes at a time, you're gonna love this model (2) Very sharp, and like all Fiskars tools, the blade is made from quality metal that maintains a nice sharp edge. (3) THIS IS AN IMPORTANT ONE - there is no big "knobby thing or pulley set up on the end; this makes it lighter to use but also allows you to get into tighter spaces for finer detailing. (4) The telescoping mechanism works efficiently and very easily (5) One can position the angle of the shears for cleaner, better quality cuts.. I'm a professional botanist, gardening columnist and gardening instructor, and I highly recommend this pole pruner.
Question:	Where can I get a replacement strap for my Fiskars 9240 telescoping pruning stick
Answer:	I sent them a request for a replacement strap for my 9240 because it frayed at the end entering the pole when fully extended. I also sent a picture. To my surprise they sent me a new one. Not just the strap but a whole new pruner. Now that’s customer service and lifetime warranty at its best. Thanks Fiaksrs
Question:	What is the largest sized branch which can be cut with the pruning shear
Answer:	The pruner blades measure about 1-1/8" apart so it should do up to 1" as stated in the specs. I've cut about 3/4" branches with no issues.

Product features

Versatile Rope-Free Pruner Makes it Easy to Reach High Branches without A Ladder

Fiskar's innovative 9240 telescoping Pruning Stik Tree Pruner makes it easy to cut high or low with a level of control traditional pruners with exterior ropes can’t match. You can cut high branches without the hassles and dangers of using a ladder. In addition, you can make low cuts without sore knees from kneeling. The Pruning Stik will help prevent back strain from bending, and it easily reaches into dense, prickly shrubs or tight spots. The rope-free design means you can use both hands to maximize your power and accuracy, and an easy-to-grip sliding handle makes the pruning action smooth and simple. An actuating ball at the end of the shaft lets you reach even farther and still prune with precision, and the cutting head rotates up to 230-degrees to let you prune at tough angles. The Fiskar's 9240 telescoping version includes a 15-inch saw blade to take down thicker branches. The 9240 tree pruner extends to a full 12-foot. The Fiskars’ 9240 Pruning Stik includes a lifetime warranty.

• CHOPS THROUGH 2” BRANCHES effortlessly. This KING OF LOPPERS will allow for fast removal of dry and woody growth and is the ideal tool for preparatory cuts and cut-to-length work. The lopper is designed and built for professional grade applications and makes cutting dramatically easy through extra leverage and compound action power!
• SHARP HARDENED CARBON STEEL BLADE will stay sharp, even after some heavy use! The low-friction non-stick coated gliding blade make every cut a joyful experience. The tools is easy to use, even for the elderly gardener or if you have arthritic wrists. There’s no cut you can’t make with this KNIGHT'S BLADE! Replacement cutting blades available.
• COMFORT GRIP AND EXTRA LEVERAGE. The rubberized grips on the 22" handles provide comfort and good grip. This longer 30” model will allow you to work with some extra strength and leverage and to efficiently navigate around higher limbs. The ergonomically handles are designed for optimal grip to ease the cutting of any branch.
• COMPOUND ACTION SYSTEM: The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!
• ORDER WITH CONFIDENCE. We at TABOR TOOLS stand behind our products. Please don’t hesitate to contact us for support, questions about our products or spare parts you might need.

User questions & answers

Question:	What is the weight of the GG12 Tabor lopper
Answer:	Weighed on a Moultrie Digital Game Scale at 3.6 pounds or 1.6 Kilograms
Question:	Are the handles steel or fiberglass
Answer:	These loppers have steel handles
Question:	Do your knuckles smash together with these pruners? Or is there enough clearance
Answer:	Absolutely NOT! These things totally rock. The mechanical advantage you get with them makes them go through thick branches like a hot knife through butter- even if you are a 5'1" 68 year old lady like me. I have their hedge shears, and they are so good, I bought these. I don't think there is a human alive that would bat their knuckles together with these. As shown, in the photo, the blades are closed. I love Tabor Tools.
Question:	Is this better than the Cindy Lauper
Answer:	While Cindy was a cutting edge artist in her day. She no longer seems as sharp. That being said, it is not fair to compare the two.

Product features

Excellent tool for both green and hard/dry wood

This tool was designed with comfort and functionality in mind, featuring ergonomically contoured grips, innovative mechanisms, and coated blades for a sharper, longer lasting cut.

Because of their design, anvil loppers can often cut thicker branches than bypass. Anvil lopper have one straight blade that cuts as it closes onto a flat edge or ‘anvil’ (think about it like a knife on a chopping board). This makes an anvil lopper an excellent tool for trimming back live wood before making a final, clean cut with bypass loppers.

• GG12A Anvil Loppers are meant for pruning both hard green and dry/woody growth
• Cuts branches up to a diameter of 2”
• Suitable for cut-to-length work
• Suitable for preparatory cuts before making a final, clean cut with bypass loppers.

GG12A - There's no cut you can't make! ​

Compound Action System

The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!

A Clean, smooth cut

The anvil mechanism works like this: the upper blade is narrower and sharper. The wide anvil distributes pressure and supports the branch in order to avoid damaging or crushing the bark. A curved head or swiveling anvil provides an easier cutting action close to the joint.

• Dynamic compound action mechanism
• Makes clean cuts with less resistance
• Perfect for cutting tougher, larger and harder branches

Use the comparison chart below to determine which TABOR TOOLS loppers are best suitable to your needs:

Product description

You enjoy doing work around the house, inside and out. When you see that one of your trees has a branch that looks like it is going to fall, you take matters into your own hands. Grabbing the Black and Decker 20V Cordless Lithium Pole Saw, you know that you'll have this taken care of in the blink of an eye. The max lithium ion battery has a longer lifespan & retains its charge 5 times longer than similar Nicd battery. Some of its most notable features include: a center extension that allows for a useable length of 6.5' or 10'; it provides overhead reach of up to 14'; the in-line power head allows easy maneuverability & visibility between branches; the unit disassembles for easy storage & transport; its lightweight design makes it easy to use.

• Provides up to 100 cuts of 1 1/2 inches pine branches per charge
• 8" cutting bar & chain allows for a maximum cutting diameter of 6"
• Includes 1 high capacity 20V LI ion pack, charger, oil bottle & wrench
• RPM: 375
• Power source: Battery powered

User questions & answers

Question:	How long does it take to charge the battery ? How long does the battery last
Answer:	Definitely yes! That's why I bought it. In two or three years, the palm trees will probably be too high for it to reach the branches and I'll have to hire someone to trim them, but in the meantime, I'll save probably $200-$300 in costs, and I can still sell this on Craig's List for $50 or so. It's a Win-Win situation.
Question:	chain stops moving as soon as it touches the surface of the tree & doesn't cut. chain is not too tight and isn't backwards. any ideas why
Answer:	Completely collapsed the entire unit is 68.5 inches in length and cannot be made shorter than this length.
Question:	I cut 7 to 8 branches, then the chain came off
Answer:	107 inches one inch shy of 9 ft. Added to the average persons height one should be able to cut a branch 15 feet from the ground. Highly recommended good product I paidc $75.99
Question:	Can i purchase additional extensions
Answer:	The 7 lbs. referenced in the instruction manual is accurate and is ready to use including installed chain. Fully extended at max height will feel like twice as much unless you extend your left hand grip on the shaft as far up to the cutting head as you can when raising or lowering the tool. This gives you better leverage. Also retract the shaft when cutting low branches or when trimming limbs.

Product description

Falco Original Pruner With 1 Inch Cutting Capacity 8.25in Solid forged metal alloy handles. Replaceable cutting blade. Anvil blade with a sap groove. A hardened bolt and nut to assure exact adjustment of both the cutting and anvil blades. Rubber cushion and shock absorber. Compatible products with FELCO 2: FELCO 902, FELCO 903, FELCO 910, FELCO 910+, FELCO 912, FELCO 980, FELCO 990.

These classic Felco pruners set the standard by which all others are judged. The choice of landscape professionals, nursery workers, and savvy gardeners around the globe; this exceptionally well-made tool features a design that's been unchanged for more than 50 years. The anvil blade has a deep sap groove to prevent sticking. A Swiss, precision-made cutting blade with soft wire cutter is replaceable for maximum return on investment. An easily-adjusted bolt and nut allow users to customize blade alignment for more efficient operation. A rubber cushion with shock absorbers pads blades where they come together to reduce impact and strain on wrists. Strong, light, forged-aluminum alloy handles have a red, plastic coating that's molded for comfort (and makes pruners easier to spot in the garden). A non-corroding spring mechanism is covered with a metal sheath to protect from moisture.

Ideal for trimming rose bushes and woody perennials, the Felco Original's smooth, soft action, ergonomic comfort, and exceptional durability put it in a class of its own. It's covered by a one-year warranty. However, with proper care, these pruners will last a lifetime. --Mary Park

• Anvil blade with a sap groove
• A hardened bolt and nut to assure exact adjustment of both the cutting and anvil blades
• Rubber cushion and shock absorber
• Ideal pruner for light applications and easily adjustable
• Features strong blades with a wire cutting notch
• Lightweight metal handles
• Blades are made of high-quality hardened steel
• Limited lifetime warranty

User questions & answers

Question:	do these ratchet when you use them
Answer:	No, the jaws don't ratchet. But they do have pretty good cutting power; I regularly cut branches 3/4 to 1 inch thick.
Question:	What is the length of the F2 pruner
Answer:	SPECIFICATIONSDimensionsProduct Depth (in.) 2 Product Width (in.) 5 Product Height (in.) 8.25 DetailsBlade Material Steel Maximum Cutting Thickness (in.) 1 Coated Blades No Product Weight (lb.) .55 lb Corrosion Resistant Yes Returnable 90-Day Forged Blade Yes Rotating Head No Garden Center Tool Type Hand Pruners/Shears Sap Groove Yes Gear Driven No
Question:	Felco says their products are made in switzerland, but the amazon has the country of origin as china. where are they really made
Answer:	The Felco pruners offered by Veldsma & Sons are the original Felco pruners, not a knock off, and are made in Switzerland
Question:	How long did Felco have these mfg in Taiwan? There are a few 2011 dated rev. from "verified" Amazon purchasers who got product labeled made in Taiwan
Answer:	Felco pruners are made in Switzerland. There is a great video on YouTube that shows the differences between the real Felco 2 pruners and the fake Felco 2 pruners: https://www.youtube.com/watch?v=ozWHIX9D37k

Product features

Felco Pruning Shears

Product description

Make reaching and cutting high branches easier than ever with Fiskars Power-Lever Extendable Tree Pruner. Power-Lever technology increases leverage to give you up to two times more cutting power than traditional tree pruners. The easy-to-handle, lightweight pole extends up to 14 foot to put high branches within easy reach. The fully hardened, precision-ground steel pruning blade features a rust-resistant, low-friction coating that makes cutting easier, and an included 15 inch saw blade makes taking down thicker branches a breeze.

From the Manufacturer

Put away that ladder. Fiskars 9301 Power-Lever 14-Foot Tree Pruner gives you exceptional reach and pruning power with two feet planted securely on the ground. The extendable pole with reach up to 14 feet means you can maintain that perfect height and graceful globe shape of your flowering crab apple tree without balancing precariously on a ladder. The Power-Lever technology multiplies your strength, making it easy to slice through branches up to 1-1/8-inches in diameter with just a tug of the rope. Or you can saw through larger tree limbs using the 15-inch Woodzig saw blade included. Either way, you'll find that pruning your pride and joy is no longer such a tall order. Limited lifetime warranty.

• Ideal for cutting high branches without climbing a ladder
• Power-Lever technology maximizes leverage to give you up to two times more cutting power than traditional tree pruners
• Included 15 inch WoodZig saw blade powers through thicker branches
• Maximum cutting capacity: 1-1/2 inch diamater (pruner blade)
• Lifetime warranty

User questions & answers

Question:	I am sorry, but my question is very basic (never used any sort of pruner before). In what position the blade should be and how to adjust it right
Answer:	I found keeping the blade straight and standing back from the tree (instead of right underneath) best for cutting.You pull the blade towards you to cut, lift the blade place it on the branch and pull towards you lift blade and place it into the cut and repeat till cut off.
Question:	is the woodzig an attachment or a separate tool used to cut larger branches
Answer:	The woodzig is the long blade used to cut/saw the branches. Everything you need comes in the package. There are no other attachments needed.
Question:	I have a juniper tree that needs pruning. The branches are about 3" - 4" in diameter. Will the Woodzig saw deal with these branches
Answer:	I have cut branches that thick, but it was difficult--especially if you have to reach a long distance. Having said that, understand that I am 74 years old. The 9301 can do the job.
Question:	What is the length of this pruner when it is NOT extended? I'm wondering for storage purposes
Answer:	Some where over 6 ft with blade folded down (TIP: when you receive pruner, cut two pieces of cardboard from the box you receive it in to make a slip cover for the blade while on pole.. just heavy tape three sides. and then slide blade between the card board at open end.. this protects the blade and you while not in use..)

Product features

Power-Lever technology gives you up to 2X more cutting power

Make reaching and cutting high branches easier than ever with Fiskars Power-Lever Extendable Tree Pruner. Power-Lever technology increases leverage to give you up to two times more cutting power than traditional tree pruners. The easy-to-handle, lightweight pole extends up to 14 foot to put high branches within easy reach. The fully hardened, precision-ground steel pruning blade features a rust-resistant, low-friction coating that makes cutting easier, and an included 15 inch saw blade makes taking down thicker branches a breeze.

Product description

With the pull of the rope handle, Corona's Chain Drive DualCOMPOUND action pulley system triples the cutting power of this 14 foot tree pruner as its heavy duty die-cast zinc alloy pruning head hooks onto branches up to 1 1/4 inches in diameter and slices through the branches with the fully heat treated, PTFE non-stick, cutlery steel cutting blade. Each whetstone-ground MAX RazorTOOTH on the saw blade is sharpened on three sides for a blade that cuts twice as fast as a conventional saw blade and the teeth are impulse hardened for a longer life.

The Corona Clipper professional 14-foot compound action tree pruner features a high-strength zinc-alloy pruning head and a fully heat-treated, high carbon coated steel blade. Sporting a large 1-1/4-inch diameter cutting capacity and a heavy duty chain-drive compound action pulley system that triples your cutting power, this tree pruner is an ideal choice for personal or professional use. The unit also features an exclusive powerglide rope pull system and curved 13-inch razor-sharp conventional saw that maximizes pruning versatility. Other features include a comfortable 24-inch foam grip and a lightweight telescoping fiberglass pole that can adjust from 7-feet to 14-feet. The pole also features a twist-lock adjustment for quick and safe pole adjustment. The pruner carries a limited lifetime warranty.

From the Manufacturer

Corona Tools, born in the orange groves of Southern California in the 1920s, has a long history of designing superior tools that continue to provide lasting performance Season after Season

• Ideal pruner for heavy-duty orchard pruning
• 14-foot compound action tree pruner with steel blade
• Comfortable 24-inch foam grip
• Exclusive powerglide rope pull system and curved 13-inch razor tooth saw blade
• Limited lifetime warranty

User questions & answers

Question:	there are 2 different holes to choose from to screw on the head (either farther/closer to the edge). Which is more effective/what is the difference
Answer:	The two holes allows you to change the angle of the saw with respect to the pole. It make a difference on the angle you are sawing from and accessiblity to diffeerent limbs. Most of the stuff I saw is no more tha about 15 feet from the ground so I've set mine on the hole closest the the tooth edge of the saw. For a higher limb or to gain better access to a limb that might be partiallym block I would move the saw to less of angle to the pole. It makes a difference on the leverage you can put on the saw and the space you have to manipulate the saw. There isn't a whole lot of difference between the two settings but sometimes a little difference is all you need
Question:	Do you just pull and hold the rope or is there some kind of motion you need to do. I see no instructions
Answer:	The rope activates the cutting blade. For small limbs you can hold the shaft in the one hand and pull with the other until the limb is cut, but for the biggest limb that can fit into cutter you will need the brace the end of the shaft on the ground or against you. Blade is spring loaded and resets itself unless a piece of bark wedges between the blade and the guard
Question:	is the rope detachable from the device for easy opersation when using only the saw part
Answer:	The rope is easy to detach; however, there is no "only the saw part". I think what you're asking is does the lever, chain and compound pull mechanism interfere with sawing-- It can and does. It also interferes with pruning but the increased force for "pruning" is worth it. I would not want to remove the mechanism from pole, in fact the saw blade attaches to the mechanism. With the increased force the need for the saw is reduced but I kept the pole and saw from my old worn out pruner for when I need to use a pole saw. Overall I'm quite happy with this TP6870 , Corona doesn't make junk.
Question:	Is a replacement part available for the Plastic Clamping Nut? It WILL crack (I have 3 of these) soon after you have had too long to return it
Answer:	Terrible engineering is it not? Just drill a small hole 3/32 works good about 2 inches below the nut and insert a bolt. for extending the saw pull it out 3 feet or so and drill another hole and then it will lock securely there as well. another nice thing to do is go to the dollar store and get some small carabineer key chain things and use them to secure the cord that works the lopper , then you can detach is while sawing. do these 2 things and you have a great t tool.

• DOUBLE-DUTY TREE PRUNING SAW – New 2020 model featuring the DocaPole Double-Duty Extension Pole with 2X the strength of the original – Guaranteed to be the absolute best high-reach dual-use pruning saw on the market today – Two great uses in One saw! Use as a pole saw for pruning high or hand-held saw for pruning and grooming low
• USE ON THE DOCAPOLE OR BY HAND –.The new Double-Duty GoSaw Extension Pole features double-strength aluminum walls at twice the thickness of the original GoSaw Pole, providing extra strength for the rigors of pruning – For jobs on the ground, just unscrew the GoSaw and saw by hand
• RAZOR SHARP - Razor sharp 13-inch bi-directional cut w/3X tooth design. Sturdy, lightweight handle with comfort grip. Use on the pole or remove and use by hand.
• HIGH REACH AND READY TO GO - Fully assembled and ready to go out of the box, providing up to 28’ of pruning reach when used while standing. For optimal performance, always extend and use the thicker, lower pole segments first if not using at full extension to reduce flex.
• MULTI-USE PREMIUM EXTENSION POLE - High-quality aluminum telescoping pole that can be used with a wide variety of attachments to accomplish all your hard-to-reach tasks; features a standard ACME threaded metal tip

User questions & answers

Question:	Do they make a sheath for the blade
Answer:	No, it does not include bar oil.
Question:	Are replacement blades readily available
Answer:	Yes, the chain can be sharpened.
Question:	Where can I get a motorized , or battery operated 30feet adjustable pruning pole with saw
Answer:	Includes standing height.
Question:	where is this made
Answer:	Yes, CMCCSP20M1 includes: (1) CMCCSP20 V20* Pole Chainsaw (1) CMCB402 V20* 4.0 Ah Battery (1) V20* Lithium Ion Charger (1) Instruction Manual (1) Extension Pole

Product features

The only Double-Duty extension pole you will ever need plus the best pruning saw

The DocaPole GoSaw with 24 Foot DOUBLE-DUTY Extension Pole is the perfect long-reach solution for pruning high limbs and branches. At twice the thickness and twice the strength of our regular DocaPole, the Double-Duty DocaPole is optimized for the toughest tasks and extends from 6 feet to 24 feet. The premium GoSaw can be also used as a hand-held saw for grooming lower branches, thick brush, and small logs. The GoSaw and extension pole provide up to 30 feet of reach when used standing, making it the ideal way to reach any stubborn branch without a ladder.

Compatible with any standard threaded attachments, the Double-Duty DocaPole is the ultimate high-reach/long-reach/far-reach telescopic pole.

(other attachments sold separately)

Durable, versatile Double-Duty design

• 2X Thickness
• 2X Strength
• Lightweight, high-quality aluminum
• Thumb levers clasps allow for easy pole extension and retraction
• Adjust from 6 to 24 feet
• Foam-padded grip for comfortable use

Super Sharp

• Razor sharp 13 inch blade
• Precision taper-ground teeth for efficient sawing
• Bi-directional cutting action works on both the push and the pull stroke
• Chrome plate finish provides a smooth cut
• Resists rust and extends the life of the blade

Versatile

• Two great uses in one saw
• Use as a pole saw for pruning high limbs and branches
• Use as a hand-held saw for pruning and grooming lower branches, brush, and logs
• Sturdy, lightweight handle with comfort grip

Durable

• Removable threaded insert is compatible with all standard threaded extension poles
• Internal locking set screw positively locks the handle securely into place for confidence while cutting

Stay off the ladder. Stay Safe.....Get the job done with the DocaPole GoSaw and Double-Duty extension pole!

(other DocaPole accessories sold separately)

Product description

About our pruning loppers:

✦Is it hard for you to cut those branches in height position?

✦Don't worry as our hand lopper features a retractable rod design and help you cut those branches easily.

✦When pruning larger, tougher branches, a confident gardener needs a tool fit for the task. And our pruning shear would be your great garden assistant.

Product specification:

-Total Longth: 27--40inch

-Blade material:SK5 Japan Teflon Coated Blade

-Weight: 1500g

-Trimming diameter: 2''

-Knife material: alloy steel

-Handle material: rubber + plastic

-Telescopic rod material: aluminum alloy

-Suitable for: fruit tree pruning, potted pruning, landscaping,garden works.

The advantages of our tree pruner:

-These anvil loppers are meant for pruning both green and dry/woody growth branches up to a diameter of 2”.

-This pruning shear has been designed with comfort and functionality in mind, featuring ergonomically contoured grips, innovative mechanisms.

-The garden clipper is designed with a telescopic rod that can be adjusted from 27~ 40 Inch.(6 adjustable length)

-The tree limb trimmer blade made of SK-5 material, allows you to trim branches and saplings effortlessly.

-This hand lopper features a thumb release lock button that ensures safety during use.

❤Buy with confidence:

-Customer satisfaction is our utmost priority. If you are dissatisfied with hand loppers, please drop us a message and we are certain to give you a full refund.

• ★SHARP AND DURABLE BLADE★The heavy duty lopper blade made of SK-5 steel straight blade coated with Japan Teflon treatment, fully hardened precision-ground blade stays sharp even after some heavy use, low-friction, rust-resistant, non-stick coating helps ratchet shears glide through wood.
• ★EXTENSIBLE ALUMINIUM HANDLE★ The extendable pruning lopper is designed with a telescopic rod that can be adjusted from 27-40Inch,6 sections telescoping with safety release lock button, ideal for cutting through 2" tree branches effortlessly. which greatly reduces the labor intensity, never feel tired after day of gardening work, even for the elderly gardener or if you have arthritic wrists.
• ★LIGHTWEIGHT AND STURDY★The rod retractable rod is made from aluminum alloy, which prevents against rust and offers you a comfortable gripping feeling. In addition, this pruner features an anti-slip rubber handle, reducing vibration during use. "
• ★WIDE APPLICATION★This lopping shear is suitable for fruit tree pruning, potted pruning, landscaping, allowing you to tackle any heavy duty pruning jobs.
• ★RISK-FREE GUARANTEE★Customer satisfaction is our utmost priority. If you are dissatisfied with hand loppers, please drop us a message and we are certain to give you a full refund.

User questions & answers

Question:	Would these pruning lopper work well to prune a plumeria
Answer:	I have used these on several different shrubs and a Dogwood tree, worked good for them, they cut good. Hopes this helps you.
Question:	Is the tree pruner convenient to operate
Answer:	Yes! It worked well pass my expectations.
Question:	Are the bypass loppers replaceable blades available
Answer:	Yes. Quality equipment!
Question:	Do the tree trimmer handles stay locked in place when extended
Answer:	Sure does. They have push button locks and works very well

Product description

This double pulley pruner was manufactured with forged steel components for strength, designed for the professional arborist. These heavy duty pruners have a 1-3/4 inch cut capacity with side cut action. The double pulley feature reduces the pulling force needed to make the cut. The pruner also features an enhanced spring for smoother cutting action and a raised hook edge to reduce blade drag. Includes pruner, pole adapter and 20-foot pruning rope.

• Includes one pruner, one pole adapter, and one 20-foot pruning rope
• 1.75-inch cutting capacity
• Removable upper spring pin and blade bolt for easy blade replacement and sharpening
• Double pulley allows for additional leverage and significantly reduces pulling force required
• Forged steel components for added strength

User questions & answers

Question:	How long is this product
Answer:	This is the head of the tool to be placed on a pole designed for trimming. The head is about 18 inches long. I use it on a 18ft pole. A very good product that is durable.
Question:	Will this jameson pole adapter work with notch poles? i already have the notch 40207 saw set but need a pruner
Answer:	The Jameson Fiberglass Pole Adapter has been specifically manufactured to work with Jameson Fiberglass Poles. It has a unique female/ male ferrule connection for secure attachment. We cannot guarantee the fit of other manufacturer products with the Jameson brand. Thank you for asking; we invite you to use our full line of Jameson items.
Question:	Length of rope
Answer:	the rope is long enough to use with 2 poles & have some left over. not sure about 3 cause I don't hav a 3rd pole, but you could always lengthen it. the pruner itself is great & a professional tool. 100 times better then the ones at home depot or lowes.
Question:	Type of pole needed? My present head clamped onto my fiberglass pole, will this one also clamp on to the pole
Answer:	K. Drake - for optimal performance, you will want to use any of the Jameson Fiberglass Base or Extension Poles to use with any Jameson Fiberglass Pole attachment; especially, the JA-34DP-PKG big Mouth Side Cut Double Pully Tree Pruner Kit. Jameson pole models can be used together in a variety of combinations - all have the same ferrules. For highest performance and safety, Jameson recommends using a base pole when using one pole or starting with a base pole when working with multiple poles. Here is a "Poles Overview" brochure to better illustrate the versatility of the Jameson Fiberglass Poles - https://s3.amazonaws.com/jamesonllc/assets/pdfs/Brochure_Poles-Overview.pdf

Product description

We've looked at hundreds of these and virtually all perform adequately at best. These are different; they are made to incredibly high standards. They use a special ratcheting mechanism, oversized for strength, and equipped with a coated blade. To this, they add telescoping handles (26 to 40" long with 6 pin-locked position stops and rubber grips). Cutting jaw capacity is 2 to 2-1/2". If you are looking for a lifetime arborist's quality tool, look no further. We cannot recommend these enough for heavy work: they are superb. The Bypass Pruner is designed to cut green wood cleanly.

• GREEN WOOD APPROPRIATE – Pruning device works best on wet woods with a cutting jaw capacity ranging from 2” to 2-1/2”
• EXTRA REACH – A telescoping handle allows an expansion from 26” – 40” to trim areas not reachable without assistance
• DOUBLE RATCHETING MECHANISM – This is a specially designed element that is oversized for strength
• LOP OFF BRANCHES – Cuts limbs which measure up to 2-inch in thickness
• CUTTING STRENGTH – It doesn’t take much effort to trim off some undesirable branches off of a small tree or bush as the sharpness of the blades does all of the work

User questions & answers

Question:	Where can I get replacement blades
Answer:	We are adding them in the next 2-3 weeks.
Question:	Is this Garret Wade or a knockoff
Answer:	I’m not familiar with Garret Wade tools but I’m finding this lopper works great...and I don’t have the strongest hands!
Question:	Do you get both
Answer:	If you mean the handle "extensions" the answer is Yes. It is made with telescoping handles. Great tool... My wife loves it!
Question:	When cutting thin branches, do you have to open the jaws completely and ratchet down multiple strokes thru thin air until it reaches the branch
Answer:	No, that's not the way this tool works. Open as far as needed and it bites into the work as soon as you close the handles, no ratcheting down. It ratchets, as required, as it opens.

• EXTRA LONG EXTENSION – Pole extends to a towering 16 feet high, so you can effectively reach all those branches that used to be too high up to take care of.
• SMOOTH CUTTING – The pruning head can snip branches up to 1.25” thick. The 14” long saw blade is made from 1.2mm thick high-carbon SK5 steel and sharpened on 3 sides for the smoothest of cuts.
• COMFORTABLE USE – Pole is made from high grade fiberglass making it lightweight and easy to handle, but still strong and durable to last you through years of use. The foam at the handle provides a soft surface to grip the pole with.
• PULLY SYSTEM - The double tackle compound pulley system is there to helps you cut through thick branches with the least effort on your part
• REAL SERVICE – When you purchase Milliard, you can relax knowing you have a dedicated team of real people ready to help you with any questions or concerns you may have. We are known for our 5-star customer service and are happy to help you with anything you may need.

User questions & answers

Question:	Is true the package has
Answer:	Not quite understanding what you’re asking regarding 90”.
Question:	Where is this product made
Answer:	This product is made in the USA. It is run by a small town family in New Jersey who started out small and grew to now serve and sell many fabulous items to thousands of satisfied customers. They now have many locations across the USA.
Question:	Bolt to attach blade lost, what size to replace
Answer:	No idea. But take a picture of the hole and measure it. Go to Ace Hardware or Home Deport. It will be close enough.
Question:	Does milliard have a website or customer service phone number? I am looking for warranty info and a replacement part
Answer:	About a year or so ago, was also in need of a replacement part and after considerable searching, did find contact info. They were not helpful. This company distributes many different types of products and guessing that many are made in China.