9 best projector lamp for benqs

• New Generation A+ lampwick inside bare bulb make it more illustrious and clear enough with the same original functioning.
• EWO'S 5J.J7L05.001 5J.J9H05.001 5J.JAH05.001 Projector Lamp with Housing for Benq Replacement Bulb
• Models : fit for Benq W1070 W1080st W1070+ HT1075 HT1085st i700 MH680 TH680 TH681 MH630 Projectors Lamp Bulb
• 180 Days Warranty 2500 Hours Life
• Testing Before Delivery, Excellent Return Service With No Any Condition Within 12 Hours Feedback.

User questions & answers

Question:	installed your projector bulb in my benq w1070 buy will not work. when i turn on the power all other functions work ok. could the new bulb be bad
Answer:	The model of camper doesnt matter, you have to match the awning model!
Question:	Installed in my w1070 and bulb does not ignite. I get the red lamp error light. Why
Answer:	Open Range did use this model of awnings-and they also used Careferee Travelr awning arms. You will need to look at the arms. If you extend the arms a little then look on the backside of the front arm there is a sticker on it. if the sticker says 87JVAp-MP these will work. if it says OVJVAP-Mp you need Carefree Travelr arms. thanks
Question:	my lamp bulb warning came on but my picture is fine should i ignore it? say i do replace it why do i need to replace the housing
Answer:	This is available on Amazon.com. Thank you.
Question:	It will fit for my benq 1070 projector exactly,furthermore will it work with w1080s
Answer:	It will fit and A&E as long as the awning does not have a metal shield or outer wrap. Thanks

Product features

EWO’S Projector Lamp - Own High Definition Vision,Feel The Different Perception.

Key Features:

• BRANDED MANUFACTURE: 100% new replacement projector lamp bulb with same functioning as your origin. Perfect match and compatibility for your projector.
• FEATURES: This is the lamp with housing, be difference from a bare bulb. Same brightness and durable lamp wick as the original bulb. Outputting high definition pictures as you are expecting.
• COMPATIBLE MODULES: Applicable for Benq HT2050 HT2150ST HT3050 W1110 W1210ST and W2000 Projector.
• INSTALLATION AND SAFTY: You will find it is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well. It is not electric, shut down your projector when you install it.
• WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 150 days. Refundable issue please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

User questions & answers

Question:	Will this bulb work for benq projector w
Answer:	Yes, it can be used for kids.
Question:	Will this bulb work with benq projector HT
Answer:	This oil nourishes the hair and gives it shine. I advise you to use it after having washed them when they are a little damp.
Question:	Will this bulb works for benq projector ht2150st
Answer:	Yes, it does.
Question:	Will this bulb works on Benq projector ht
Answer:	I rub a few drops on the palms of my hands and run them through my hair. The amount of oil depends on the length of the hair.
Question:	How much is an Optional paper feeders for increased capacity and flexibility
Answer:	Yes, Husqvarna 532138971 are high lift blades, ideal for bagging or side discharge.
Question:	Does this have wireless lan
Answer:	IDK but it matched the oem blades
Question:	Do you put the paper in the main tray face up or face down? I'm looking to print checks face up. Thanks
Answer:	Correction: You get only one blade . You must order two for 42" riding mower. Outdoor Store has for $10.00 + $2.99 shipping.
Question:	What is the country of origin
Answer:	Hi Daniel. Most likely, yes. But you need to make sure your current blade has the star-shaped center hole. Blades are also based on mower deck size. Thank you so much for considering Husqvarna for your outdoor power equipment needs.

Product features

Angror HT2050 Projector Lamp Bulb for Benq HT2050-HT2150ST-HT3050-W1110-W1210ST-W2000 5J.JEE05.001 Lamp Bulb Replacement,with Housing

• Brand Features: Angrox manufactured bare bulb with exact compatibility,unique performance for your projectors.Well experienced in producing,installing,adjusting bulbs make it effective.Offering premium return and full refund service without any limitations.
• Lamp Models Available : BU-FU310B BL-FU310A BL-FU310C BU-FU310D 5J.J8805.001 5J.J6R05.001.
• COMPATIBLE MODULES: Applicable for OPTOMA EH500 X600 DH1017 DH1014 EH501 EW420 HD151X HD36 OPX4045 RX825 W501 EH490 EH502 EH504 EH504WIFI W490 W502 W504 X501 X502 BL-FU310B.for BenQ Projector HC1200 MH740 SH915 SX912 SW916 MX766 MW767 MX822ST.
• Product Features:For UHP 310-245W 1.0 E20.9 be compatible for most housings which the house matched with your accurate projector models.This bare bulb is an universal product for the projectors.With higher performance including brightness,real color,clearer picture.Performs the same function as original.Longer lifttime makes your projector always keep excellent working.Higher temperature resistance with optimized buner design.Light weight and compact reflector lamps with ECG.Uniform ligh
• WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 150 days. Refundable issue please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

Product description

★Description:

-Replacement for 5J.JEE05.001 Lamp Module

-100% High Quality Brand New Replacement lamp Module

-Easy to install.The quality can be guaranteed and price is competitive.



Compatible Projector Models:

BENQ 5J.JEE05.001 HT2050,HT2150ST,HT3050,W1110,W1120,W1210ST,W2000,W2000+

★How to install?:

1

.Gather the necessary tools, screwdriver.

2

.Turn off TV or Projector.

3

.Remove Lamp Compartment Door.

4

.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!

5

.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.

6

.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.

7

.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.

8

.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.

9

.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.

• ☛ The Newest High Quality lamp-burner inside bare bulb make it More Illustrious And Clear Enough With The Same Original Functioning bulb
• ☛ It Show a Very Stable Light Output, as The High Luminance Decreases Only Slightly Over The Entire Lifetime.
• ☛ Fits for:BENQ 5J.JEE05.001 HT2050,HT2150ST,HT3050,W1110,W1120,W1210ST,W2000,W2000+ Projector
• ☛ All lamps will be tested at our factory before leaving the facility
• ☛ Comes with a 180 day replacement Warranty and a 30 day Refund warranty.

Product description

5J.J8805.001 Replacement Lamp

- For HC1200 MH740 SH915 SX912



Note

- Turn off the power before replacing the lamp.

- Clean the fan and surrounding dust before replacing the lamp to avoid abnormal    temperature and cause the projector to malfunction.

- After replacing the new lamp, clear the lamp usage time.

- After turning off the projector, wait for the cooling to complete before   unplugging the power cord.

- Avoid other objects blocking the projector, which will cause abnormal heat   dissipation, so as not to affect the life of the lamp and other faults.



Araca bulb

- Perfect compatibility and stability

- Continuous improvement only to provide higher quality bulbs

- Adhere to the pursuit of high quality products



Araca's services

- 30 days refund & 200 days replacement

- Provide technical support for projector bulbs in the first time

- Adhere to the pursuit of high quality services

• Compatible Models: 5J.J8805.001 with housing, fully tested before leaving the factory.
• New type of luminescent electrode, perfect performance and compatibility, easy to light up your projector.
• 2500 hours life, 3500 hours in ECO mode, 5000 lumens brightness.
• 200 days warranty, there is any problem, give you a free replacement or refund to you immediately.
• For Projector Model: HC1200 MH740 SH915 SX912

Product features

Araca Optical System & HD World

Araca is an electronic component R&D manufacturer and lighting system R&D manufacturer, we apply advanced optical technology to the projector light source.

We are eager to take you into a high-definition bright, and dynamic world.

We provide a 200-day return and exchange service, if the product fails in 200 days, we can replace it for you for free or return the full amount of the order to you.

Bulb model: 5J.J8805.001

BenQ HC1200 MH740 SH915 SX912

• LOUTOC 5J.J7L05.001 Replacement Projector Lamp for Benq W1070 W1070+ W1080ST W1080ST+ HT1075 HT1085ST MX662 MX720 i700 5J.J9H05.001 (lamp with housing)
• For Projector: for Benq W1070 W1080st W1070+ HT1075 HT1085st i700 MH680 TH680 TH681 MH630 Projector
• 2000+ hours life, ECO mode longer life, 2000 lumens brightness.
• 30 days refund & 90 days replacement, technical support provided, 12hrs response solved.
• Attention: Shut down your projector when you install it. After replacing the new lamp for your projector, please remember to reset the lamp timer.

• The ABITAN: We are a Professional manufacture and supplier of light source for projection and stage, with more than 10 years experience;
• QUALITY CONTROL: All Projector lamps will be Tested Strictly before leaving the factory, And they Show StableLight Output about 2000 Lumins Over 3500-5000h life;
• COMPATIBLE MODULES: BENQ W1070 W1070+ W1080ST W1080ST+ HT1075 HT1085ST W1250 W1500 HT2050 HT3050 HT4050 HT2050A HT2150ST W1110 W1350 W2000 W3000 W1210ST MX662 MX720 i700 MH630 MH680 TH680 TH681 TH681+ TH682ST.
• EASY INSTALLATION: It is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well;
• WARRANTY: Include with every projector lamp we sell is our trusted 200-Day Guarantee. If you order a projector lamp from our company and you ara not satisfied for any reason, you may send the projector lamp back for a full refund or an exchange

User questions & answers

Question:	Will this work on my benq ht
Answer:	I would say 10-15 minutes, my daughter has long thick hair and you can only do 1” pieces at a time

Product features

Model：for 5J.J7L05.001 / 5J.J9H05.001 / 5J.JAH05.001 Original Lamp with Housing

• All Projector lamps will be Tested Strictly before leaving the factory, And they Show Stable Light Output about 2000 Lumins Over 3500-5000h life;
• It is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well;

Compatible Models:(Ctrl+F to find your model)

for Benq W1070 W1080st W1070+ HT1075 HT1085st i700 MH680 TH680 TH681 MH630 Projectors

Professional production workshop

We have a modern factory, all wick parts are inspected by machines, and professional engineers will supervise each production step;

Rigorous testing

All Projector lamps will be Tested Strictly before leaving the factory;

Installation guide

1. Turn off the projector and unplug the power cord, allow the projector lamp to cool down for at least one hour;
2. Use the screwdriver to loosen the screw securing the lamp cover, then lift it off;
3. Loosen the screws securing the lamp to the projector. The screws do not come all the way out;
4. Lift up the lamp handle and gently pull the lamp out of the projector;
5. Gently insert the new lamp into the projector.make sure it is facing the right way. Press the handle down;
6. Push in the lamp firmly and tighten the screws to secure it, then replace the lamp cover and tighten the screw to secure it.

Maintenance tips

• Check the heat. An overheated projector puts stress on the projector lamp and can cause it to explode. Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.

• Give it a rest. Don’t operate the projector non-stop. An average use of four to five hours per day will ensure longer projector lamp life.

• Keep it clean. Be sure to clean the air filters every 3 months or more often if there is a lot of dust. Regular maintenance will prolong the DLP projector lamp life.

• Go eco. Some projectors have the “Eco mode” or “Lamp Economy Mode” that reduces projector lamp brightness by 20% while extending the lamp life by 50%.

Product description

Use the A+best quality wick to ensure the brightness of each lamp!Compatible with Benq W1070 W1080ST HT1075 HT1085ST W1070+ i700 W1500 MX662 MX720 Projectors

• STAR-LAMP 5J.J7L05.001 Premium Replacement Lamp with Housing FOR LCD/ DLP Projectors, School, Business, Engineers
• Models : fit for Benq W1070 W1080ST HT1075 HT1085ST W1070+ i700 W1500 MX662 MX720 Projectors Lamp Bulb
• Production of advanced bulb and housing, this projector lamp will give out a bright High Definition image and elevate your screening experience!
• 180 Days Warranty and 2500-3000 Hours Life,Is there something wrong with your new replacement projector lamp? we can replace it for you completely free of charge or refund to you,offers you a 100% money back guarantee.
• BULB:240 W

• Brand Features: Angrox manufactured bare bulb with exact compatibility,unique performance for your projectors.Well experienced in producing,installing,adjusting bulbs make it effective.Offering premium return and full refund service without any limitations.
• Product Features: With higher performance including brightness,real color,clearer picture.Performs the same function as original.Longer lifttime makes your projector always keep excellent working.
• COMPATIBLE MODULES: Applicable for BENQ W1070 W1070+ W1080ST W1080ST+ HT1075 HT1085ST W1250 W1500 HT2050 HT3050 HT4050 HT2050A HT2150ST W1110 W1350 W2000 W3000 W1210ST MX662 MX720 i700 MH630 MH680 TH680 TH681 TH681+ TH682ST.
• Safety: Higher temperature resistance with optimized buner design.Light weight and compact reflector lamps with ECG.Uniform light output throughout the entire lifetime.
• Premium Service：Angrox promised to sell any products after tested,checked,qualified before we ship to you! Sometimes maybe you will receive a defctive one,maybe it is damaged on the way.You could enjoy our prmium unlimited return service.Please do contact us if you need us to solve your any issues before you leave reviews and feedbacks.

User questions & answers

Question:	Does this bulb fit in the vankyo v
Answer:	It depends on how long your hair is. It just curl the hair and make different shape in general
Question:	Does it come with handling gloves
Answer:	The key is to wrap small amounts of hair in it at one time. It took me a little while to get use to, but once you do, I love mine, and I have hair that is about half way done my back.

Product features

Angrox Replacement Projector Lamp Bare Bulb for Osram P-VIP 240/0.8 E20.9N