12 best nady wireless microphone for karaokes

Product description

The DW-100 represents the newest and finest of the acclaimed DW series of professional digital wireless products available from Nady Systems. With incredible sound quality and reception Nady has once again raised the level for affordable Digital Wireless Systems with the DW-100, 100-channel digital wireless system. With features including; a 200+ ft. wireless range, 24-bit DQPSK digital audio, a compact mini receiver with LCD display, an included TRS-XLR cable to accommodate professional and novice uses and a durable all-metal microphone housing, make the Nady DW-100 the leader above other wireless systems in its class. SPECIFICATIONS SYSTEM Modulation: Digital DQPSK Transmission Rate: 204.8kbpsSample Rate: 48kHzBit Depth: 24bitChannels: 100Channel Spacing: 260kHzFrequency Stability: ±0.005%Dynamic Range: 100dBFrequency Deviation: ±45kHzFrequency Response: 20Hz ~ 16kHz ±3dBOperating Range: over 200ftS/N Ratio: 110dBTHD: RECEVIER Sensitivity: 12dBµVOutputs: Balanced ¼” Microphone Level (fixed) & Unbalanced ¼” Line Level (adjustable) Power Consumption: 9V DC 200mAWireless Port: BNC/50ΩSpurious Suppression: 75dBMax Output: +15dBVTRANSMITTEROutput power: 10mWSpurious Emissions: Microphone Battery Type: AA (2x)Battery Life: 8 - 10 hours

• 100 auto-selectable channel operation between 902.00MHz & 927.74MHz, digital wireless microphone system with over 200 feet interference-free range
• DQPSK transmission virtually eliminates wireless interference with 48 kHz / 24-bit conversion technology for exceptional audio clarity
• Mini-sized receiver features a bright LCD display and both balanced and unbalanced outputs
• Microphone transmitter features an all metal construction with bright LCD display
• Ideal for concert, stage performance, classrooms, presentations, karaoke, interviews and perfect for the gigging musician, just grab and go!

User questions & answers

Question:	Does receiver take batteries
Answer:	ac input only
Question:	Does reciever take batteries
Answer:	No, the DW-100 does not have Bluetooth connectivity. The DW-100 would connect to a speaker via the 1/4" MIC or LINE output on the back of the receiver.
Question:	Is the amplifier equipped with Bluetooth? How does it connect to a speaker
Answer:	Thank you for your question. The DW-100 was not designed with a specific product pairing in mind, as it is compatible with any standard amplifier/speaker that can accept a mic level or line level signal from the receiver.
Question:	I bought dw100 remote microphne,pl. advice which speaker with built in amplifier should i buy which would be compatible to yhe microphone i bought
Answer:	Yes via 1/4" cable.

Product description

The best value in wireless systems! Easy to set up and operate, at a price that can’t be beat!

The Nady DKW-3 HT is a cost effective VHF wireless handheld microphone system. It's easy to use — simply plug in instead of your wired microphone.

Delivering clear, transparent, high-fidelity audio, the DKW-3 HT system can be used for a broad range of singing and speaking applications, karaoke and recreational singers, DJ's, auctioneers, teachers, aerobics instructors, clergy, and a host of others. It features an advanced audio processing circuitry for a wide dynamic range - no overloading for loud inputs or background hiss during quiet use.

This system comes complete with everything you need to plug in to a PA… including a connecting ¼”- to - ¼” audio cable. Just install a fresh battery (not included) in the microphone, connect the AC adapter to the receiver and to a power outlet, turn it on, and you are done! This affordable and reliable system couldn’t be easier to set up and to use!

SPECIFICATIONS:



Overall:

Frequency Response: 80Hz-14kHz (±3dB)

Dynamic Range: 95dB

Total Harmonic Distortion: <0.7%

RF Carrier Frequency Range: 170-216MHz

Frequency Stability: ±0.005%, crystal controlled

Modulation: FM (F3E), ±15kHz max.

Operating Range: 150 ft. typical-up to 300+ ft. line-of-sight



Transmitter:

Audio Input: Nady DM-20D unidirectional dynamic cartridge

Controls: OFF/ON switch

LED Indicator Unit: "ON" (single flash), Low Battery Alert (steady)

RF Power Out: 50mW

Harmonic & Spurious Emissions: >-40dB

Battery: 9V Alkaline

Battery Life: Up to 15 hours

Dimensions: 8.9" x 1.4" Dia. (22.6 x 3.5 cm)

Weight (w/o battery): 5.4 oz. (151 g.)



Receiver:

Controls: Power ON/OFF

Connectors: 1/4" unbalanced audio out jack, 2.1 mm barrel-type DC input jack

LED Indicator: Power ON, Transmitter RF

Power Requirements: 9V @ 120mA, nominal, AC/DC adapter supplied

Antennas: 15" (38 cm), collapsible

Dimensions: 8.2" X 5.3" X 1.75", (20.8 X 13.5 X 4.4 cm.)

Weight: 16.1 oz. (451 g.)

• Ideal entry-level system — All the advantages and freedom of wireless operation without cumbersome cords: Includes a wireless microphone and a receiver – Great system for karaoke, live performance, singing with friends
• Operates on a single channel in the high-band VHF range (170-216 MHz) for reliable, interference-free performance, and excellent high-fidelity audio. 250+ ft. typical operating range — up to 300+ ft. line-of-sight
• Included HT-Duo wireless microphone provides easy operation with On/Standby/Off switch and low-battery LED indicator which flashes once for “Unit On” and lights steady for low-battery alert. Standby position allows easy muting with the transmitter on
• Features the Nady DM-20D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise, providing up to 15 hours of wireless operation on a single 9V alkaline battery
• DKW-3 receiver with power ON/OFF switch, ¼” audio output jack, and front panel volume control. Advanced audio processing circuitry for a wide dynamic range - no overloading for loud inputs or background hiss during quiet use.

User questions & answers

Question:	Does it have to be hooked up to anything or can my kids use it to sing along with the radio
Answer:	This receiver/transmitter needs to be hooked up to an amplifier. The wireless mics send a signal to the receiver/transmitter, which is connected via 1/4" plug in connector. If you want to just transmit thru a radio, there are wireless mics out there that connect thru an fm frequency, but quality is poor. If you go to your local radio shack or music store, someone will be able to show you how the mics hook up.
Question:	I already have this set and i love it. i would like a second set so we can use 4 mics. can i use two of the same sets
Answer:	Hi Debbie, Thank you for your interest in this product. This is a 2 ch set. You could get multiple mics on the same channel. There are ch B&D and ch P&R. Your mics have to match the base, though. So you could have 2 Bs and 2 Ds or 2 Ps and 2 Rs. But the 2 would only have one volume knob to control each set. If you need 4 separate channels, each with individual control, then yes, you need a B&D ch with a B&D base and P&R ch with a P&R base.In short YES you could use both you will just have to make sure that the mic's are paired to the right receiver. I hope this was helpful. Thanks, Ray James
Question:	Will this hook into a guitar amplifier
Answer:	Yes it will
Question:	Which adapter would I need for connecting to a computer. And, would there be any delays of sound coming from the speakers
Answer:	Great question! You would use the supplied 1/4-inch cable connected to either an 1/8-inch adapter which connects to most computer sound cards. If experiencing latency from your sound card, you may download the ASIO4ALL sound driver to enhance the delay response between signal input and output (latency). Another option would be to purchase a USB audio interface, USB 1/4-inch adapter, or USB audio mixer. These dedicated options would provide much better control and stability than most on-board or stock 'add-on' computer sound cards.

Product features

DKW-3 Receiver

Easy to use — simply plug into your audio mixer or amplifier in place of your wired microphone or instrument.

HT -Handheld Microphone

- Easy, convenient operation with On/Off switch and low-battery LED indicator which flashes once for Unit On and lights steady for low-battery alert.

- Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise.

- Operates up to 15 hours on a single 9V alkaline battery.

LT - Lavalier / Lapel Microphone

- For use with LM-14/O (omnidirectional), LM-14/U (unidirectional), or OML-4 (miniature omnidirectional) lapel microphones.

- Off/Standby/On switch allows convenient audio muting with the transmitter on.

- Input level adjust.

- Locking 3.5mm jack.

- LED status indicator flashes once for unit on, lights steady for low-battery alert.

HM - Headset Microphone

- For use with Headmic Series headset microphones.

- Off/Standby/On switch allows convenient audio muting with the transmitter on.

- Input level adjust.

- Locking 3.5mm jack.

- LED status indicator flashes once for unit on, lights steady for low-battery alert.

GT - Instrument

- Especially tailored for instruments with a pickup such as electric guitar or bass.

- Off/Standby/On switch allows convenient audio muting with the transmitter on.

- Input level adjust.

- Locking 3.5mm jack.

- LED status indicator flashes once for unit on, lights steady for low-battery alert.

Why Choose Nady?

Nady Systems has been designing, manufacturing, and marketing wireless microphones since 1976. One of the first wireless innovators, Nady has sold millions of wireless systems worldwide, and continues to provide some of the most innovative/ highest performing products on the market at the most competitive prices.

In 1996, Nady Systems was recognized by the National Academy of Television Arts and Sciences with an Emmy for Outstanding Technical Achievement in pioneering wireless microphone technology. This prestigious award acknowledged Nady's ground breaking contributions to the field.

Product description

The best value in wireless systems! Easy to set up and operate, at a price that can’t be beat! the Andy dkw-8u HT is a cost effective UHF wireless handheld microphone system. It's easy to use — simply plug in instead of your wired microphone. this system comes complete with everything you need to plug in to a PA including a connecting ¼”- to - ¼” Audio cable. Just install a fresh battery (not included) in the microphone, connect the AC adapter to the receiver and to a power outlet, turn it on, and you are done! This affordable and reliable system couldn’t be easier to set up and to use! specifications: overall performance: dynamic range: 120dbtotal harmonic distortion fry carrier frequency range: infrequency stability: 0. 005%, crystal controlled modulation: FM 20kHz normal operating range: Up to 250 ft. Typical; up to 500+ feet optimum line-of-sight receiver: squelch: fixed controls: volume control connectors: DC in: (2. 1mm barrel), unbalanced out: ¼” (6. 3mm) jacked indicators: power on, signal, AF led unwanted signal Rejection: 60dB image and spurious antenna: 4”, Single section telescopic transmitter: Audio input: Andy dm-10d neodymium dynamic cartridge controls: on/standby/offer power out 20mwharmonic and spurs indicators: single LED, flash once “on”, low bat “steady on”.

• Ideal entry-level system — All the advantages and freedom of wireless operation without cumbersome cords: Includes a wireless microphone and a receiver – Great system for karaoke, live performance, singing with friends.
• Operates on a single channel in the high-band UHF range for reliable, interference-free performance, and excellent high-fidelity audio. 150+ ft. typical operating range — up to 300+ ft. line-of-sight
• Included HT-8U wireless microphone provides easy operation with On/Standby/Off switch and low-battery LED indicator which flashes once for “Unit On” and lights steady for low-battery alert. Standby position allows easy muting with the transmitter on
• Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise, providing up to 10 hours of wireless operation on two AA alkaline battery
• DKW-8U receiver with power ON/OFF switch, ¼” audio output jack, and easily visible LED indicators for power on, transmitter on and audio peak.

User questions & answers

Question:	Can I use a different mic that has the same 3.5mm connector
Answer:	Yes I believe it is. You can ensure that it is by looking up the model #1453-2WM on UL's Website.
Question:	What wld i need to tie this into recording audio via a phone
Answer:	yes, along the outside of the box. Plus instructions can easily be found on the internet.
Question:	I am looking at this system to use for financial seminars in a restaurant banquet room. Will this work, and what type of speaker is recommended
Answer:	It did not work on my machine so I went to Walmart and bought one
Question:	I have an Ion Tailgater speaker/amp. Will this work with it
Answer:	Mine is model148.230

Product description

The Andy DW-22 Digital Wireless Microphone System brings you the superior sound quality of digital audio technology in a simple, easy-to-use and reliable package. Complete with a handheld microphone and a body pack, this system couldn’t be easier to set up and operate. After inserting new AA batteries in the transmitters, just connect the AC adapter as well as the audio output that is most suited to your set up (either microphone or line level) to the receiver and turn them all on. This system is loaded with top professional operating features and offers the best performance and price value available in digital wireless. With 48 kHz / 24-bit digital audio conversion, low latency and clear channel operation in the UHF 900MHz band, the Andy DW-22 Digital Wireless Microphone System provides interference-free performance for any application. Specifications Overall system: Frequency response: 20Hz~20kHz 3dB Digital format: 48kHz / 24 bit / QPSK modulation Dynamic range: 120dB THD: DW-22 RECEIVER Sensitivity: -94dBm Output Connections: ¼"" unbalanced jack (line) 2 XLR Balanced (mic) Power Requirements: 13. 5VDC / 400mA DIGITAL HT/DIGITAL LT TRANSMITTERS RF Power Out: +13dBm, (50mW maximum allowed by FCC) Audio Input: Dynamic cartridge (HT) 1/8” TS locking mini-jack, for headword or lavalier microphone (LT) Battery Type: 2 AA Alkaline Battery Life: Up to 11 Hours

• A reliable digital wireless microphone system that is easy to setup and use – the superior sound quality of digital audio with digital qasr modulation combined with the performance & reliability of the UHF frequency range
• State-of-the art, professional 48kHz/ 24-bit digital conversion for exceptional audio clarity with transparent frequency response across the entire audible range (20Hz 20kHz). the truest possible sound with undetectably low latency
• Perfect for stage performance, karaoke, public address (presentations, classes, conferences). Reliable long range operation. Digital transmission virtually eliminates interference from nearby obstacles. Extended operating range up to 300 feet line-of-sight
• This is a dual fixed-frequency wireless system. Please consult the manufacturer to confirm compatibility when attempting to use two or more of this system simultaneously or use it with other wireless systems
• Nady Systems is dedicated to providing the best user experience possible. Since 1976 Nady has been a US based brand, with a US based customer service center, and with US valid product warranties

User questions & answers

Question:	Hello , i have d-15 d-16 , how i can buy d13 ( 902.30 ) - d14 ( 903.80 mhz ) ?? can you send me link
Answer:	Yes, it will sync up with your router. Just follow the instructions on how to sync the extender to your router. It will probably only take you 2 minutes to get it up and running.
Question:	i can use one mic conected in one computer and other conected to another computer at same time and make diferent audio captures
Answer:	Yes, if your house is that big. Once you use a Moca device like the Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter (ECB6200S02) to convert your existing coax cable system to a hardwired ethernet system, you can plug the Actiontec 802.11ac Wireless Network Extender with Gigabit Ethernet & Bonded MoCA (WCB6200Q02) into any Coax Port in your house to extend your wi-fi coverage (as well as two gigabit ethernet ports. Plug as many of the WCB6200Q02 as needed. Hard-wired ethernet throughput averages to roughly 70-85% of the hardwired throughput of the router directly connected to a PC. Wireless coverage is obviously extended to reduce blind spots. A Moca system is far superior to the Homeplug infrastructure.
Question:	Frequency of it
Answer:	If you are still considering this you should know two things: 1. Xfinity logs into your gateway to disable the MOCA port. If you are planning to use the MOCA adapter on your gateway you will have to log into the router (10.0.0.1 or whatever) to turn it back on. They do that because if you have multiple cable boxes they share DVR information via a MOCA like standard. 2.if you are using your existing home cables and the Xfinity gateway's MOCA port then you should probably install the MOCA filter that is probably suggested on the product page to keep your neighborhood off of your home network.
Question:	I would like to order a dual unit, test it out and if it work, then order three more. How do buy two more that don't conflict
Answer:	James,Yes, you can use the Actiontec Moca modem to hardwire your computer to it via an Ethernet connection. That is how I use it. Because I do stock market transactions on my computer I wanted a stable and relatively non-hackable connection. But it also supplies a wireless network extension on my ground floor that is powerful and great for my iPhone. It is a remarkable device! My computer, which is a full 300 feet and 2 floors away from my Comcast wireless gateway Moca capable modem delivers the same 90 mbps download speeds with a low 13 ms ping that my upstairs computer gets from Comcast. It can be a little confusing to set up at first, depending on who your ISP is and what kind of modem you have, but once you get it going it works like a dream. One thing you may need to tweak is your splitters if your Coax cable has splitters on the line. You may need to replace them with Moca compatible splitters which have a slightly different frequency filter in them than the ones that come from your Cable Co. Also, understand that if you have a Moca compatible modem from your ISP you won't need the small Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter (ECB6200S02) at your Internet signal source, but most people don't have this kind of modem. I specifically got one of these from Comcast because they offer it. Actiontec has pretty good explanations on their website, and I believe you can call them with questions, which, if I remember, I did, and they helped a great deal with understanding how to set it up. I have had ZERO problems with this device. It is truly awesome. The alternative for me to get a fast signal to my downstairs office would have involved rewiring my house at huge expense. Wireless extenders made by other companies like Linksys (which I have tried) don't work. I wish I could kiss the guy who invented this technology. It is that good. Good luck!

Product features

DW-11 / 22 Receiver

Reliable long range operation. Digital transmission virtually eliminates interference from nearby obstacles and noise from your audio. Extended operating range up to 300 feet line-of-sight. Single receiver for single transmitter operation. Choice of transmitter-handheld, lapel/headmic, guitar/instrument.

Comes in different transmitter options Digital HT/Digital LT/HM

HT- Wireless Handheld Microphone

- High quality microphone capsule.

- LCD display for frequency, channel, battery level.

- Channel up/down buttons.

- Mute button with mute on/off LED.

- 2AA batteries for long life and economical use.

LT- Lapel Microphone with Bodypack

- For use with LM-14 lapel microphones.

- LCD display for frequency, channel, battery level.

- On/mute/off switch.

- Metal belt clip.

- 3.5mm locking jack.

- 2AA batteries for long life and economical use.

HM-3 - Headmic with Bodypack (Black )

- For use with HM-3 headset microphones.

- LCD display for frequency, channel, battery level.

- On/mute/off switch.

- Metal belt clip.

- 3.5mm locking jack.

- 2AA batteries for long life and economical use.

HM-10 - Headmic with Bodypack (Beige )

- For use with HM-10 headset microphones.

- LCD display for frequency, channel, battery level.

- On/mute/off switch.

- Metal belt clip.

- 3.5mm locking jack.

- 2AA batteries for long life and economical use.

DW-22 HT System

2 DIGITAL HT Handheld Microphones

DW-22 HT-LT System

DIGITAL HT and DIGITAL LT Bodypack Transmitter ( with Lapel Microphone LM-40 )

DW-22 HT-HM ( Headset Microphone Options Available )

DIGITAL HT and DIGITAL LT Bodypack Transmitter with Choice of Headset Microphones

Headset Microphone Options :

* HM-3 ( Black ) * HM-10 ( Black / Beige ) * HM-20U ( Black / Beige )

* HM-35 ( Black / Beige ) * HM-45U ( Black / Beige )

Custom Combo - Options of Headset Microphones

2 Digital LT Bodypack Transmitters with Choice of Headset Microphones

Headset Microphone Options :

* HM-3 ( Black ) * HM-10 ( Black / Beige ) * HM-20U ( Black / Beige )

* HM-35 ( Black / Beige ) * HM-45U ( Black / Beige )

Product description

The center stage from Nady is a neodymium dynamic microphone with mic clip and tripod stand. Advanced high-output neodymium cartridge provides maximum clarity and definition, even in noisy environments, unidirectional cardioid pattern reduces feedback, special-design internal cartridge mount for lowest handling noise and quiet performance, withstands highest sound pressure levels without overload or distortion, rugged all-metal construction, external on-off switch on handle, and includes 20 foot microphone cable. Also includes mic clip and sturdy metal tripod adjustable for performers up to 6ft four inches. The center stage can be used with any standard mixer, powered Mixer/amp or mic preamp.

• All-in-One kit includes a high-performance microphone, sturdy metal adjustable tripod microphone stand with clip, and a 20 ft. cable (XLR to ¼” connectors)
• Dynamic microphone provides professional sound quality with rich, full-frequency audio. Advanced high-output neodymium cartridge provides clarity and definition, even in noisy environments, while cardioid pattern reduces feedback
• Withstands high sound pressure levels without overload or distortion
• Rugged, all-metal construction - External on/off switch on handle
• Microphone stand features tripod base and adjustable height (34-60”), and folding legs for easy transport and storage.

User questions & answers

Question:	Is it a kiddy kind of microphone? or is it a n adult kind
Answer:	It's more an adult than a kiddy!!!! I would give it a rating of 7 out of 10 comparing it to a kid or an adult. Other words, it isn't one you would find on a professional stage but it is not a kids either. Hope this helps.
Question:	What is the length when folded up? I want to buy carrying a case for it
Answer:	I really don't know I gave it as a gift
Question:	what is the height minimum and maximum? Does the height adjust
Answer:	it adjusts and is used by my 9 year old (4 foot something) and can go as high for about a 5 7" person
Question:	Will this work, out of the box on its own? Or do I need to purchase an amp. This is for a 4 year old and 6 year old as a toy
Answer:	You will need an amp. I bought the Danelectro N10B Honey Tone Mini Amp in aqua (although they are selling it in burgundy on amazon right now) and then also a cable.. I think everything total came to about $40? At the time my kids were 5 & 6 and 9 and the younger two used it a great deal. It has a nice quality sound to it and the amp is tiny but sounds great for the price! Hope that helps! Oh and I think just because Philly George uses it for an adult purpose in a studio does not mean it can't be used for kids as well. Microphones marketed specifically to kids are notoriously poor quality, this one does the job well and has stood up to my kids' not so gentle usage very well. Good luck!

Product description

Replacement / extra handheld wireless microphone for Nady U-1100 or U-2100 systems (Make sure to order the right band! )

The Nady U-1100 HT is the handheld wireless microphone to be used with the Nady U-1100 (single transmitter operation) or U-2100 (dual transmitter operation). Ideal for both music and speech, and for interview-style applications, the U-1100 HT features high quality components and delivers clear, crisp audio every time.

Do I need Band A or Band B? The U-1100 and U-2100 systems operate in the UHF range using one or two banks of 100 channels: Band A: 480-504.75 MHz or Band B: 505-529.75 MHz A band A transmitter can only work with a band A receiver (either a U-1100 Band A receiver or channel#1 of any U-2100 receiver) A band B transmitter can only work with a band B receiver (either a U-1100 Band B receiver or channel#2 of any U-2100 receiver)

Here is how to determine the operating band of a system component:

A U-1100 receiver can either be Band A or Band B. To find out which band your receiver is operating on, look at the label at the bottom of the receiver. A U-2100 dual channel receiver is always Band A on channel 1 and band B on channel 2, so there is only one kind of receiver. Choose a Band A transmitter (handheld microphone or bodypack) to pair with Channel 1 of the U-2100 receiver and Band B to pair with Channel 2 of the U-2100 receiver Handheld Microphone Transmitter: Unscrew the battery cap to uncover a silver sticker with the letter A or B indicating which band it operates on. Bodypack Transmitter (LT or GT): Open the battery compartment and look for the letter "A" or "B"

• Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

User questions & answers

Question:	can i plug this into pyle 4.3 out of 5 stars 68 reviews premium bluetooth stereo amplifier, 200 watt compact amp ? i’m trying to make a karaoke set
Answer:	I didn’t look for that.
Question:	Will this work on a Nady DW-22 system
Answer:	The generic bulb is a good replacement.
Question:	Will this work with Nady WA-120 system
Answer:	Hello Valued Customer, we appreciate your question. The replacement bulb on our GE Mini Touch Light is a 2.4V 0.5A incandescent bulb that can be found at your local hardware store. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Will it work with any nady system
Answer:	Light was not worth what I paid for it. It stopped working after one week.

Product description

• Linear full-range response with crisp mid-range presence for optimal clarity and punch. A perfect all-purpose, versatile stage and recording microphone
• Powerful neodymium element cuts through the loudest sound pressure level situations without compromising sound. Ultra-light aluminum voice coil & transformerless design provide noise-free, accurate reproduction across the audio spectrum
• Tight cardioid polar pattern provides excellent off-axis rejection for superior gain before feedback. Advanced capsule multi-axis rubber shockmount minimizes handling noise. External on/off switch for easy control of audio from stage
• Rugged, all-metal construction for maximum reliability featuring a zinc die-cast case and steel mesh windscreen with anti-dent ring
• Professional grade 15 ft. XLR-to-1/4 cable supplied

User questions & answers

Question:	Does this work with asio SA76 44 mini
Answer:	Works great! Can't go wrong for the price
Question:	can this microphone be plugged in a laptop and can you hear the sound clearly if you do or does it have to be an amplifier
Answer:	You can plug it into a laptop using an adaptor (female 1/4" to male 3.5mm - available at any radio shack) - if you want to record into the computer or broadcast on the internet. If you are trying to amplify your sound, you will need to plug into an amp and speaker - laptop speakers are not intended to project sound at high volumes or cover large distances/areas.
Question:	Can you use it with out the cord
Answer:	This is a corded mic so the mic must be plugged in to use.
Question:	Can this microphone be plugged into a Casio CTK-700 keyboard
Answer:	That is so weird...i have that very keyboard,..yes it does.

Product description

NADY U-2100LT

Dual 100-Channel UHF Wireless System

Nady’s award-winning wireless innovation and expertise are evident in the latest addition to their line of professional UHF wireless systems. The U-2100 is jam-packed with user friendly features: Unsurpassed UHF PLL wireless performance. Clear, transparent audio with full frequency response. 120 dB dynamic range. Operation up to 500’ (line-of-sight). Sophisticated IF filtering for optimal simultaneous operation of multiple systems in the same location. Rugged all ABS housing.

Nady’s unparalleled wireless technology is recognized worldwide and sets the standard for high performance and reliability. The U-2100 (with dual receiver for dual receiver operation), has 100 selectable UHF frequencies per transmitter for interference-free operation. Take it anywhere you need it and experience pristine audio on stage or off. It’s equally ideal for speaking engagements and singing applications. Set up is amazingly quick and easy with ASC download that sends selected channel information to transmitter via infrared (IR) sender.

Overall System Performance

Frequency response: 50Hz~18kHz ±3dB

Dynamic range: 120dB

Harmonic Distortion: <0.5%

Operating range: 150-250 feet typical, 500 feet max line-of-sight

U-2100 receiver

Output Impedance: 1kΩ (unbalanced) and 600Ω (balanced)

Audio Outputs: Adjustable unbalanced summed line audio output; fixed balanced microphone level audio output

Power requirement: 13.5VDC/0.4A

Antennas: Removable swivel BNC antennas

U-1100LT Bodypack Transmitter

Compatible with all Nady lapel and headworn microphones with a 3.5mm locking plug such as the LM-14, HM-1, HM-3, HM-5U, HM-10, HM-20U, HM35/45U

Input Impedance: 5kΩ

Input Connector: locking 3.5mm mini-jack

Antenna Type: External attached

Battery Type: 2 x AA alkaline or NiMH

Battery life: 8-10 Hours typical

• Featuring two Nady U-1100LT bodypacks with compact housing, metal belt clip, LCD display and 3.5mm locking connector, compatible with all Nady lavalier and HeadMic series microphones
• Includes 2 Nady LM-14O Omni-directional lavalier/lapel microphones
• Up to 500ft. operating range (line-of-sight). Clear, transparent audio with full frequency response, 120dB dynamic range and operation
• 200 selectable UHF frequencies (manually or with Auto-Scan) for interference free operation. Sophisticated IF filtering for optimal simultaneous operation of up to 10 transmitters in the same location. Selected channels stored in memory
• U-2100 receiver features RF/ AF bar graph, balanced XLR fixed microphone level and adjustable unbalanced ¼-inch jack audio line level outputs, squelch (RF mute) adjust

User questions & answers

Question:	Can I add either another handheld or lavalier to the U
Answer:	No. This is perfect for a 7.5
Question:	How many cables needed to go to amplifier
Answer:	Yes There is a button next to the plug you can change the lights
Question:	Hi, what are the operating uhf frequencies for this u-2100 dual ht system ? 480-504.75 mhz or 505-529.75 mhz ? thank you
Answer:	I connected the end of if this 500 LED set to one of their 200 LED sets with no issues. They offer an 800 LED set so I imagine you'd be fine if you don't exceed 800 LEDs
Question:	Does Autoscan mean that the RX automatically finds open frequencies in a given location that are usable
Answer:	the cord is very thin, but I didn't have any issues putting them on my tree. I use indoors.

Product features

U-2100 Receiver

Features:

HT: Handheld Microphone

- High quality microphone capsule.

- LCD display for frequency, channel, battery level.

- Mute button with mute on/off LED.

- Channel up/down buttons.

- 2AA batteries for long life and economical use.

LT: Lavalier Microphone

- For use with lavalier microphones.

- Metal belt clip.

- On/mute/off switch.

- LCD display for frequency, channel, battery level.

- Channel up/down buttons.

- 3.5mm locking jack.

- Channel up/down buttons.

- 2AA batteries for long life and economical use.

HM: Headset Microphone

- For use with headset microphones.

- Metal belt clip.

- On/mute/off switch.

- LCD display for frequency, channel, battery level.

- Channel up/down buttons.

- 3.5mm locking jack.

- Channel up/down buttons.

- 2AA batteries for long life and economical use.

GT: Guitar / Instrument

- Metal belt clip.

- On/mute/off switch.

- LCD display for frequency, channel, battery level.

- Channel up/down buttons.

- 3.5mm locking jack.

- Channel up/down buttons.

- 2AA batteries for long life and economical use.

Specifications

Operating Frequency range: (A) 480-504.75MHz and (B) 505-529.75MHz:

- Freq. Synthesized: PLL (100 channels selectable) 250 kHz/step.

- PLL system frequency stability: <0.005%.

- Frequency response: 50Hz-18kHz ±3dB.

- Dynamic range: 120dB.

- Harmonic Distortion: <0.5%.

- Modulation: FM (F3E) ±25kHz normal, ±75kHz max.

- Operating range: 150-250 feet typical, 500+feet max line-of-sight.

Receiver Specifications:

Product description

Replacement / Extra Wireless Lapel Microphone Transmitter for Nady W-1KU, 2W-1KU, 4W-1KU and 8W-1KU systems – 520.0-544.9MHz frequency bands (Be sure to select the correct band!)



The Nady BT-1KU LT is compatible with the Nady W-1KU, 2W-1KU, 4W-1KU and 8W-1KU systems. Ideal for music, speech, or on-camera interviews, the Nady BT-1KU LT features high quality components and delivers clear, crisp audio in any application.



Do I need Band 1, Band 2 or Band 3 transmitter?

The W-1KU Series systems operate in the UHF range using one of three banks containing 1000 channels:

Band 1: 672.0-696.9MHz - A “Band 1” transmitter for use with a “Band 1” receiver

Band 2: 795.0-819.9MHz - A “Band 2” transmitter for use with a “Band 2” receiver

Band 3: 520.0-544.9MHz - A “Band 3” transmitter for use with a “Band 3” receiver



Here is how to determine the operating band of a system component:

A W-1KU receiver can either be Band 1, Band 2 or Band 3. To find out on which band you need, simply check the label on the receiver’s back panel.



From the Microphone Transmitter (HT): Unscrew the battery cap to uncover a silver sticker indicating which band it operates on.



From the Bodypack Transmitter (LT or GT): Open the battery compartment to uncover a silver sticker indicating which band it operates on.

• Compatible with Nady W-1KU, 2W-1KU, 4W-1KU and 8W-1KU systems that operate on 520.0-544.9MHz frequency bands
• Includes an OLM-4 Lapel Microphone with a 3.5 mm TS locking plug and compatible with all Nady Lapel and HeadMic series microphones
• Auto-Selectable Channel (ASC) function and Up/Down recessed buttons for manual channel selection. The LCD backlit display indicates the channel and frequency selected as well as battery level status
• Sliding Off/ Mute/On switch with mute LED allows for convenient audio muting while keeping the transmitter on and paired
• Convenient, economical operation with two AA alkaline or NiMH batteries. Features an all-metal body in a compact, durable housing and external antenna

Product description

DIGITAL HT TRANSMITTER

RF Power Out: +13dBm, (50mW maximum allowed by FCC)

Audio Input: Dynamic cartridge

LED Indicator: Unit on (single flash), Low Battery (red)

Battery Type: 2 AA Alkaline

Battery Life: Up to 11 Hours



Here is how to determine the operating band of a system component: A DW-22 receiver is a dual-channel unit operating on fixed frequency pairs of either 902.30MHz / 903.80MHz or 915.30MHz / 916.80MHz. To find out which bands your receiver is on, just look at the backlight display on the front face of the unit. When deciding on a replacement transmitter (handheld microphone or bodypack) for your system, simply select a Nady Digital HT or Digital LT transmitter that operates on a frequency corresponding to one of the frequency pairs of your receiver. The frequency of your transmitters are listed inside each one’s battery compartment and should also be verified before purchasing a replacement.

• Channel 14 Transmitter Compatible with Nady DW-11 and DW-22 for Channel 14 Only
• Features a unidirectional neodymium dynamic cartridge for optimal true sound, maximum feedback rejection and minimal handling noise
• Sliding switch for On/Off power and Mute allow convenient audio muting with the transmitter on. LED indicator for battery status
• Sleek housing with internal antenna for durable long life and optimum aesthetics
• Convenient, economical operation with two AA alkaline or NiMH batteries

• The Best Rechargeable Wireless Microphone System that is available on the market at this price - UHF Dual Rechargeable Wireless Microphone With Bluetooth Receiver System. Perfect for Karaoke, Speech, Meeting, Party, Church, Wedding, DJ, Performance, Indoor or Outdoor. No need to set! Just plug and use! A Great Gift for family or friends!
• Wireless Range max up to 200ft, enough for normal usage; Receiver Box with Mic-A & Mic-B Independent Volume Control; Adjustable ECHO Effect; Bluetooth Function for Background Music Playing(Turn on Bluetooth and search "X168" to connect, BT Range about 32 Feet); Design for Karaoke Speaker, PA System, Outdoor Speaker, Sound Bar, Bookshelf Speaker, Home Theater, etc(NOTICE: THIS SYSTEM CANNOT BE USED FOR BLUETOOTH SPEAKERS, BECAUSE BLUETOOTH SPEAKERS DO NOT HAVE MICROPHONE JACK)
• Two ways for Input: Wired Input(1/8"(3.5mm) Jack Input) or Bluetooth Connect Input(Turn on Bluetooth and search "X168" to connect); Two ways for Output: 1/4"(6.35mm) or 1/8"(3.5mm) Jack Output
• Cool Design LED Light Ring; Microphone with Built-in Lithium Battery - No need to buy batteries(DC 5V Charging; Charging Time about 3-4 Hours; Working Time about 6 Hours); 50 UHF Work channels(CH01-CH50) for Simultaneously Using(Each Set Using In Different Channel)
• What’s in the package? 1 x Receiver Box; 2 x Rechargeable Wireless Microphone; 2 x Antenna; 1 x Power Adapter; 1 x 6.35mm to 6.35mm Cable; 1 x 3.5mm to 3.5mm Cable; 2 x Microphone Windscreen; 1 x USB Charging Cable; 2 x Antiskid Ring; 1 x Audio Cable; 1 x User Manual. We offer 100% customer satisfaction, if you have any question, please click Sold by "Kithouse Direct", then leave a message to us. Your problems and suggestions is the key for us to improve.Thank you for choosing Kithouse products!

User questions & answers

Question:	Is the rechargeable batteries replaceable once it eventually wears-off
Answer:	I do not know i have not needed to change battery
Question:	How do you connect this to an AV receiver
Answer:	You will need the cord for audio input then your out put to speakers
Question:	Does it charge in any usb port
Answer:	yes
Question:	Can i connect to my sound bar samsung hw-q60r (has aux in connect to the analog output of an external device
Answer:	i connected to my lg soundbar..

• Clear and Pristine Sound Quality: With professional cardioid dynamic capsule, the system can reproduce more excellent, clear, pure and full sound and eliminate background noise and howling. Ideal for Karaoke, Home KTV, Big party, DJ, Wedding, Class use.
• Enhanced Signal Stability: With 15 adjustable frequencies per UHF mic and long transmission range(60 m) in open space, ensuring that up to 15 sets can be used simultaneously without worrying about interferences.
• Sturdy and Durable Material: The all metal mic with steel mesh grille is particularly resistant to impact and corrosion. The receiver box has separate volume control for each wireless mic.
• Easy to Operate: Just turn on the receiver and mics, they will match automatically. Note: It is not compatible with laptop, iPad, cellphone and AV receiver. 2 x AA batteries (not included) are required for each mic.
• What you get: 2 x handheld microphone, 1 x receiver, 2 x anti-slip ring, 1 x 6.35mm audio cable, 2 x mic covers, 1 x manual.

User questions & answers

Question:	How is the quality compared to a shure sm 58/57 for live performances and recording
Answer:	I've used these for live performances as well as the 58 and beta. I use these all the time but I wouldn't put them in the same category as a 58. You get a receiver and two mics for less then one 58.there is a reason for that.
Question:	Can I connect the receiver to a bluetooth speaker using Aux cable
Answer:	Hi, no, it can not be connected with aux input. If your speaker has mic input, it would be fine.
Question:	Can I use it in a small theater? The maximum distance of the small theater is about 70ft
Answer:	Yes, you can. This mic can be used upto 200ft. Just adjust the volume and mic frequency if they get too loud.
Question:	Is the product covered by warranty
Answer:	Yes, the TONOR TW-820 is covered by a two-year warranty. If you encounter any operation problems or product quality related issues during use, please feel free to contact us.