14 best neewer vocal microphones

Product description

Note: Microphone, acoustic isolation shield, pop filter and headphone are not included.

Description

The heavy duty microphone stand is stable, sturdy and durable. It is suitable for supporting microphone, acoustic isolation shield and pop filter in studio to record clear vocal.

It is made of aluminum and with tripod design, non-slip feet. Its adjustable height can meet most demands. The max length can reach 65.2 inches/ 165.5 centimeters, while the min length is 39.4 inches/ 100 centimeters.

It is quite easy to adjust the height with multiple holes on the tube. And with only two knobs, it is also susceptible to install and pack.

It has a standard 5/8-inch thread mount, can be directly plugged into the socket of the acoustic shield.

Specification

Material: Aluminum

Color: Black

Max Length: 65.2 inches/ 165.5 centimeters

Min Length: 39.4 inches/ 100 centimeters

Weight: 85.30 ounces/ 2418.21 grams

Package Contents

1 x NW002-1 Heavy Duty Tripod Microphone Stand

• Suitable for supporting microphone, acoustic isolation shield and pop filter in studio to record clear vocal
• Made of sturdy aluminum and stable tripod design, heavy duty, non-slip feet, adjustable height for common use
• Multiple holes facilitate to adjust the height; Simple to operate, only with two knobs
• Standard 5/8-inch Thread Mount: Allow it directly plug into the socket of the acoustic isolation shield; Max length: 65.2 inches/ 165.5 centimeters; Min length: 39.4 inches/ 100 centimeters
• Note: Microphone, acoustic isolation shield, pop filter and headphone are not included

User questions & answers

Question:	Is the mic clip inclided
Answer:	No.
Question:	Does the height adjustment screw not go into any of the holes, is it just tightening against the pole? Are the holes only for the safety pin
Answer:	Safety pin only....adjusts to any desired height you want.... the holes are for the safety pins, at standard positions for a more secure fit... but you can tighten the knob for any position! But I try to use the pins, it is safer!
Question:	Can somebody recommend a good isolation shield for this specific stand? thank you in advance
Answer:	Most will work just fine... universal sizes are used and extras usually come with the shields and stands. If not easily purchased at low prices right there at Amazon. They work really well!
Question:	Does the isolation windshield included
Answer:	No. This is the stand only.

Product features

Neewer Adjustable NW002-1 Wind Screen Bracket Stand for Supporting Acoustic Isolation Shield in Studio (Black)

• Note: Microphone, acoustic isolation shield, pop filter and headphone are not included.
• This tripod-style Stand offers exceptional stability to support your microphone, acoustic isolation shield or pop filter during your performance or recording. Perfect for use in studio or on stage.
• It has a standard 5/8-inch thread mount, making it easy to plug into the socket of the acoustic shield.

Specification

• Material: Aluminum
• Color: Black
• Maximum Length: 65.2 inches/ 165.5 centimeters
• Minimum Length: 39.4 inches/ 100 centimeters
• Weight: 85.30 ounces/ 2418.21 grams

Package Contents

• 1 x NW002-1 Heavy Duty Tripod Microphone Stand

Product description

Note:the microphone is not included.

Description:

Neewer vocal booth for mounting behind the microphone.

It designed to help minimizing the undesirable hall refections,noises and echos in order to obtain a very "dry" vocal or instrumental recording signal.

This flter allows good recording results even under unfavorable ambinet conditions without having to take complicated measures to reproduce studio conditions or an acoustical insulation.

It features a lightweight and rugged construction with high quality soundproofing materials and can be mounted on all conventional microphone stands.

Specification:

Material:

Soundproofing foams + Lightweight Aluminum Panel

Dimension:

19.8" x 12" x 10.6"/50.4cm x 30.6cm x 27cm

Package Contents:

1 x Vocal Booth

1 x Adjustable Support Bar

1 x 3/8" and 5/8" Thread Adapter

• High quality soundproofing material(various types of soundproofing foams + aluminium sheets),breaks up room reflections and absorbing noise, acting as an isolation shied
• 3/8" and 5/8" thread adapter for stands and microphone holders
• Mountable on most conventional microphone stands
• Dimensions(W x H x D):17.3" x 11.8" x 10.2"/44cm x 30cm x 26cm
• Note:the microphone is not included.

User questions & answers

Question:	Does it come with the stand
Answer:	No isolation shield only. Stand purchased separately.
Question:	Is the microphone holder that comes with it a 1/4"-20 or
Answer:	it comes with a 3/8 and 5/6 adapter for the mic stand
Question:	i want to use this while recording my computer screen and talking, will this work putting it next to me or on my table
Answer:	Sure, but it might be in your sight line of watching your progress on your computer screen.
Question:	can you use this with a mic stand that hands your mic upsidedown in front of you
Answer:	Yes, but it is very well made and quite heavy, so u need a heavy duty mic stand with a solid base

Product features

Neewer Microphone Isolation Shield Absorber Filter Vocal Isolation Booth with a 3/8" and a 5/8" Screw Adapter for Most Mic Stands

Note:the microphone is not included.

Description:

• It designed to help minimizing the undesirable hall refections,noises and echos in order to obtain a very "dry" vocal or instrumental recording signal.
• This flter allows good recording results even under unfavorable ambinet conditions without having to take complicated measures to reproduce studio conditions or an acoustical insulation.
• It features a lightweight and rugged construction with high quality soundproofing materials and can be mounted on all conventional microphone stands.

Specification:

• Material: Soundproofing foams + Lightweight Aluminum Panel
• Dimension: 19.8" x 12" x 10.6"/50.4cm x 30.6cm x 27cm

Package Contents:

• 1 x Microphone Isolation Shield
• 1 x Adjustable Support Bar
• 1 x 5/8" Screws Adapter
• 1 x 5/8" Screws Adapter

Adjustable Support Bar

The support bar of the microphone isolation shield can be easily adjusted up and down to find the best recording heigh and to keep out the noise

Microphone Connection Rod

Supplied with a 3/8" screw adapter and a 5/8" screw adapter, suitable for most microphones. You can also adjust the height of the mic connection rod to find the best recording position for the microphone.

3/8" Screw Adapter & 5/8" Screw Adapter

Both 2 screw adapters can be connected to most standard microphones stands. The wider compatibility is enough to connect to more microphone stands.

Product description

Note: the microphone is not included.

Description:

The microphone acoustic isolation shield made of metal alloy and professional acoustic foams, it designed to help minimizing the undesirable hall refection, noises and echo in order to obtain a very "dry" vocal or instrumental recording signal.

This filter allows good recording results even under unfavorable ambient conditions without having to take complicated measures to reproduce studio conditions or an acoustical insulation.

Foldable design, save space during transportation.

Specification:

Material:

Mental Alloy + Professional Acoustic Foams

Dimensions (W x H x D):16.7" x 12" x 6.1"/42.5cm x 30.5cm x 15.5cm

Package Contents:

1 x Microphone Shield

1 x Support Bar

1 x 3/8" and 5/8" Thread Adapter

• Made of metal alloy and professional acoustic foams, breaks up room reflection and absorbing noise, acting as an isolation shield.
• 3/8" and 5/8" thread adapter for stands and microphone holders
• Foldable design, save space during transportation
• Dimensions (W x H x D):16.7" x 12" x 6.1"/42.5cm x 30.5cm x 15.5cm
• Note: the microphone is not included.

User questions & answers

Question:	Can the thread adapter be removed / use this on a table
Answer:	I have not open the box yet.
Question:	Distance from unit
Answer:	Depending on mic type, place mic about the center of the "circle" if it was complete. Then, depending on proximity effect you want, place vocalist about 8-16" away from mic.
Question:	can i use this alone to stop echo in a regular empty room
Answer:	I Would put my mic in the corner of the room with this, and add foam-panels/blanket on the wall behind/in front of me as well... if you really wanna help with echo add something to each wall to minimize echo while using the mic shield.
Question:	How effective is the small foldable shield
Answer:	These types of devices are only effective when the room is engineered properly. If the walls and ceiling are bare and the floor is ceramic tile, not very effective. They work well along with pop filters, acoustic barriers, most importantly the microphone quality. The product is constructed well and quality material. The size is perfect for portability, If you dont require portability, get bigger model...

• Kit includes: Condenser Microphone + Metal Shock Mount + 3.5mm to XLR Audio Cable + Ball-type Foam Cap + Pop Filter + Scissor Arm Stand+XLR Female to XLR Male Cable + Table Mounting Clamp + 48V Phantom Power Supply + Adapter
• The NW-700 professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source
• NW-35 SUSPENSION STAND: made of all steel construction, sturdy and durable. *Max load: Approx 53oz / 1.5KG*. PlEASE NOTE: This Stand is NOT Suitable for Blue Yeti USB Microphone
• 48V Phantom Power Supply delivers reliable 48V power. Universal XLR input and output. On/off power switch and LED indicator. Comes with one adapter
• Shock Mount Diameter: 1.6"-1.8"/43mm-46mm. Table Mounting Clamp Maximum Opening: 1.7"/4.5cm. PLEASE VERIFY the size of your microphone and the thickness of table BEFORE ORDERING

User questions & answers

Question:	What kind of plug ins do i need on my laptop? And with this can i start making music the day it comes
Answer:	My guess is yes, but I'm not sure. works great. btw.
Question:	What do I need to do in order to make the mic compatible with a Mac
Answer:	not the same size. not sure whatelse is differ
Question:	What am i doing wrong? Ive checked all plugs, changed the input on the recording software, and still doesnt work
Answer:	Yes it is Stereo input and for stereo outputs to headphones. I'm very happy with the way it works volume control for each Headphone set.
Question:	Does it require a sound card
Answer:	No you can't directly. You will need a quarter inch adapter, preferably stereo and you are good to go. Works awesome by the way.

Product features

Neewer Professional Home Studio Condenser Microphone with Mini Scissor Arm Stand and 48V Phantom Power Supply Kit

Kit includes: Condenser Microphone + Metal Shock Mount + 3.5mm to XLR Audio Cable + Ball-type Foam Cap + Pop Filter + Scissor Arm Stand+XLR Female to XLR Male Cable + Table Mounting Clamp + 48V Phantom Power Supply + Power Adapter

1. Neewer Professional Condenser Microphone has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.
2. Tailored for studios, recording studios, broadcasting stations, stage performances and computer in sound reinforcement or recording, to pick up voice or instruments, indoors or outdoors.
3. Perfect for Vocals, Musical Instruments, Broadcasting, Podcasting, Interviews, Voice Recording, Video Conference, Singing over Internet, Online Chatting such as Facebook, MSN, Skype, YY.
4. This plug and play microphone can directly connect to your smartphone or computer, so you don't need to download special drivers or tools.

NW-700 Professional Condenser Microphone

• Available for your computer and laptop. Gold-sputtered diaphragm for accurate sound reproduction. Low noise, wide dynamic range and high sensitivity output. Fashionable design. Noble and elegant appearance. Sturdy and durable.
• Perfect for studios recording, personal ententainment, youtube video, broadcasting stations, etc.
• Listen and share your singing, podcasting, broadcasting, tunes, stories and voiceover with others. Enjoy being an anchorman.

Warm Reminder:

1. The microphone CANNOT be used with Mobile Phone and Tablet Computer. *NOTE: It CANNOT work with Mac.

2. If you want better sound effect, a sound card should be used.

3. When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.

NW-35 Suspension Boom Scissor Arm Stand with Table Clamp

• Double-braced arms add strength to stand much more weight.
• The flexible arms allow you to adjust the suitable angle and height to show your perfect voice.
• Max. Load Capacity: 35.27 ounces/1 kilogram
• NOT Suitable for Blue Yeti USB Microphone
• Table Mounting Clamp Maximum Opening: 1.7"/4.5cm. PLEASE VERIFY the thickness of your table BEFORE ORDERING.

Microphone Wind Pop Filter Mask Shield

• Double Layer: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, then it passes the second screen, the blast is easily contained to produce great quality recordings.
• Protect your microphone from surplus spit caused by over eager performers. It can also protect the microphone from the accumulation of saliva.

Anti Vibration Microphone Shock Mount

• This professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise.
• Feature an angle adjustment with locking knob.
• NOTE: Fits for mic of 1.6"-1.8"/43mm-46mm Diameter. PLEASE VERIFY your microphone size BEFORE ORDERING

48V Phantom Power Supply

• Delivers reliable 48V phantom power for condenser mics and transfer sound signal to sound card in a compact, durable, plastic housing.
• Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer.
• On/off power switch and LED indicator for ease of operation.
• One Power Adapter is included. Input Voltage: 110V

Product description

Note: The microphone, stand and headphone are not included.

Description

The Sound absorbing panel is composed of two key components, the folding diffusion shell, and the foam absorption lining.

The outer shell is composed by two curved metal plates which are vented with small holes designed to redirect unwanted audio from reaching the microphone.

The inner walls of the diffusion shell are lined with high quality foam used to absorb the source's reflecting audio waves that are being recorded after they reach the microphone.

It is designed for microphone-stand mounting, can accommodate any size microphones. Create a closer, drier, more controlled vocal or instrument recording in many situations.

It has 5 panels. 3 stationary center panels and 2 foldable end panels. This design makes the panel easy to pack and carry around without occupying too much room.

Sturdy aluminum construction, make it durable and sturdy. High-density sound absorbing acoustic foam ensures good recording. Adjustable knobs make the installation on stand more easy and stable.

Specifications:

Material: Aluminum + Foam

Weight: 99.5 ounces/ 2820.77 grams

Package Contents:

1x NW-5 Sound Absorbing Vocal Recording Panel

User questions & answers

Question:	Does it include the microphone mount as shown
Answer:	There indeed is a microphone mounting set included in this. Love the product and how it absorbs unwanted sound in the studio.
Question:	Is this a good option for recording a one person podcast (instead of covering the whole room with expensive paneling
Answer:	I use mine for recording audio tracks for training videos and it gives a nice quality sound. You still need to be aware of sounds outside your door.
Question:	Can it be mounted upside down? I have an articulating arm and the mic hangs upside down
Answer:	It’s very heavy. You would need a very strong mount with a strong set of beams.
Question:	What mic stand accommodates this the best? My mic stand is cheap and sways with the weight it bares
Answer:	You just need to get a sturdy microphone stand.

Product description

Note:

1. The computer and phantom power adapter are not included

2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with desktop computer, the Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone

Can be used in Mac without installing driver and Windows 2000/XP/7/8/10/Vista system;

Strong output, no distortion, low power consumption;

Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with smooth frequency response range

Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations.

NW-35 Arm Stand

Made of all metal construction, sturdy and durable

The adjustable arms can be fold up and easy for you to carry around

The mounting clamp can attach to tables, desks, shelves, counters, etc

Extend up to 27.56 inches/70 centimeters

USB Cable:

Length: 4 feet/1.5 meter

Installation Steps:

1.Install the stand clamp to table edge, tight it; Put the bottom part of the recording microphone stand into the hole of stand clamp, adjust its position, tight it.

2.Screw shock mount on the top part of recording microphone stand; Fix the microphone on the shock mount by pinching the clip of shock mount.

Package Contents:

1 x NW-7000 USB Condenser Microphone(Blue and Silver)

1 x Adjustable Suspension Scissor Arm Stand and Mounting Clamp

1 x Pop Filter

1 x Shock Mount

1 x USB Cable(Blue)

1 x Ball-type Anti-wind Foam Cap

• KIT INCLUDES: NW-7000 USB Condenser Microphone(Blue and Silver), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap
• NW-7000 USB CONDENSER MIC: Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source; Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations
• NW-35 ADJUSTABLE ARM STAND: The adjustable scissor arm stand with mounting clamp is made of all metal construction, sturdy and durable; The adjustable arms can be fold up and easy for you to carry around; The mounting clamp can attach to tables, desks, shelves, counters, etc; Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc.
• METAL SHOCK MOUNT: Features an adjustment with locking knob and can effectively reduce handling noises; The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit
• WIDE COMPATIBILITY: Can be used with Mac without installing driver and Windows 2000/XP/7/8/10/Vista system; Strong output, no distortion, low power consumption

Product features

Neewer USB Microphone for Windows and Mac with Suspension Scissor Arm Stand, Shock Mount, Pop Filter, USB Cable and Table Mounting Clamp Kit

Kit includes: NW-7000 USB Condenser Microphone(Blue), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap

The sensitivity of the side of the bidirectional microphone is extremely low which can reduce the sound of nearby instruments in multi-track recording

Please Note:

• 1. The computer and phantom power adapter are not included;
• 2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with the desktop computer, the Microphone could be used alone; When connected with a laptop computer, please connect the laptop to the electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone (Blue)

• The microphone is compatible with most Laptop(Windows7 and above, Mac OSX 10.9 and above)
• Strong output, no distortion, low power consumption.
• Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with smooth frequency response range.
• Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings, and familiar situations.

Pop filter

Block the sound of blasting

Metal shock mount

Reduce noise caused by vibration

Mic windscreen foam cap

Protect the microphone

Scissor arm stand

The microphone can be fixed to a suitable position

Dubbing

Song recording

Online meeting

Product description

NOTE: Microphone, Shock Mount and Headset are NOT included.

Description:

Neewer pop filter shield can effectively diffuses acoustic waves surrounding the microphone and keep the sound from bouncing back towards the microphone, controlling reflected soundwaves.

Unwanted outside audio waves and vibrations, also known as noise and interference, are shielded away from the recording area while your voice finds a clear path to your microphone.

Specifications:

Dimensions: 15.74x9.68 inches/40x24.6centimeters(HxW)

Sound Absorption Panel Thickness (with Foam): 1.9 inches/4.8 centimeters

Material: ABS, Foam, Metal

Color: Black

Package Contents:

1 x Pop Filter Isolation Shield

1 x Small Tripod

1 x Extension Tube

1 x 3/8-5/8 inch Adapter

• FUNCTION: Effectively diffuses acoustic waves surrounding the microphone and keep the sound from bouncing back towards the microphone, controlling reflected soundwaves; NOTE: Microphone, Shock Mount and Headset are NOT include. The shell is made of ABS plastic material
• GREAT PERFORMANCE: Unwanted outside audio waves and vibrations, also known as noise and interference, are shielded away from the recording area while your voice finds a clear path to your microphone
• LIGHTWEIGHT AND PORTABLE: You can easily transport from the studio to the recording booth or somewhere else
• EASY TO USE: Easy installation and studio quality performance will quickly make it your sound crisper and clearer
• PREMIUM MATERIAL: ABS plastic cover, high density noise-absorbing acoustic foam and metal-made tripod make it durable and stable

User questions & answers

Question:	Is the mic mount adjustable
Answer:	Yes. Mic can move roll up. Roll down.
Question:	Does it connect to software or an app for voiceovers
Answer:	This is JUST the isolation shield. The microphone is not included.
Question:	Work without the table top stand, just flat on a desk
Answer:	Hi there, no that stand is hooked in there good. I love it, but my husband had to really fool around to get the microphone to hook on to it. So if you are not inclined in that way, be careful. I couldn't have done it myself. Over all I'm happy with the purchase.
Question:	Can you attach the shield to a normal Mic stand, instead of a table top
Answer:	It appears so. I did not, but it comes with extra extenders.

Product features

Neewer Tabletop Compact Microphone Isolation Shield with Tripod Stand

NOTE: Microphone, Shock Mount and Headset are NOT included.

Description:

• Neewer pop filter shield can effectively diffuses acoustic waves surrounding the microphone and keep the sound from bouncing back towards the microphone, controlling reflected soundwaves.
• Unwanted outside audio waves and vibrations, also known as noise and interference, are shielded away from the recording area while your voice finds a clear path to your microphone.

Specifications:

• Dimensions: 15.74x9.68 inches/40x24.6centimeters(HxW)
• Sound Absorption Panel Thickness (with Foam): 1.9 inches/4.8 centimeters
• Material: ABS, Foam, Metal
• Color: Black

Package Contents:

• 1 x Pop Filter Isolation Shield; 1 x Small Tripod; 1 x Extension Tube; 1 x 3/8-5/8 inch Adapter

Product description

*PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.*

NOTE:

1.The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it.

When connected with desktop computer, the Microphone could be used alone;

When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included).

3.The microphone can not be used with mobile phone and tablet computer. *NOTE: It cannot work with Mac.

4.If you want better sound effect, a sound card should be used.

5.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.

NW-700 Condenser Microphone

Has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.

Low noise, wide dynamic range, high sensitivity output.

Material: Metal

NW-35 Scissor Arm Stand

*Max load: Approx 35oz/1KG*

Double-braced arms equipped with super-strong spring. Adjustable angle & height to show your perfect voice.

Material: Steel

Extend up to 31.5"/80cm.

Pop Filter

Metal Shock Mount

Ball-type Foam Cap

Table Mounting Clamp

3.5mm Male to XLR Female Cable:

Length: 8.2ft/2.5m

• The Set Includes: Condenser Microphone, Adjustable Suspension Scissor Arm Stand, Table Mounting Clamp, Metal Shock Mount, Pop Filter, Ball-type Anti-wind Foam Cap, 3.5mm Male to XLR Female Cable. NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally; If you want better sound effect, a sound card should be used; Please use a extra 48V phantom power adapter to connect it (phantom power adapter is not included)
• The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source.
• The adjustable scissor arm stand is made out of all steel construction, sturdy and durable. Folding type, convenient to carry. Can be mounted on the announcers' table. The double-braced arms add strength. *Max load: Approx 35oz / 1KG*
• The microphone wind screen pop filter shield can ensure that your tracks are audible and easy to understand.And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
• The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.The microphone can not be used with mobile phone and tablet computer. NOTE: It cannot work with Mac.

Product features

Neewer NW-700 Broadcasting Recording Condenser Microphone & Mic Scissor Arm Stand with Shock Mount and Table Mounting Clamp Kit

Please Note:

1. NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally;
2. If you want better sound effect, a sound card should be used;
3. Please use a extra 48V phantom power adapter to connect it (phantom power adapter is not included)

• The Set Includes: Condenser Microphone, Adjustable Suspension Scissor Arm Stand, Table Mounting Clamp, Metal Shock Mount, Pop Filter, Ball-type Anti-wind Foam Cap, 3.5mm Male to XLR Female Cable.
• Pro condenser microphone: Adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source.
• Adjustable scissor arm stand: Made out of all steel construction, sturdy and durable. Folding type, convenient to carry.
• Mic wind screen pop filter shield: Ensure that your tracks are audible and easy to understand. And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
• Metal shock mount: features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.

NW-35 Scissor Arm Stand

Adjustable angle & height to show your perfect voice.

Mic Pop Filter

Banish the dreaded hissing and lisping sounds.

XLR to 3.5mm Audio Cable

Suitable for most audio receive devices.

Anti-wind Foam Cap

Avoid slight ambient noise such as airflow.

Product description

Note:

1. The computer and phantom power adapter are not included

2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with desktop computer, the Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone

Can be used in Mac without installing driver and Windows 2000/XP/7/8/10/Vista system;

Strong output, no distortion, low power consumption;

Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with smooth frequency response range

Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations.

NW-35 Arm Stand

Made of all metal construction, sturdy and durable

The adjustable arms can be fold up and easy for you to carry around

The mounting clamp can attach to tables, desks, shelves, counters, etc

Extend up to 27.56 inches/70 centimeters

USB Cable:

Length: 4 feet/1.5 meter

Installation Steps:

1.Install the stand clamp to table edge, tight it; Put the bottom part of the recording microphone stand into the hole of stand clamp, adjust its position, tight it.

2.Screw shock mount on the top part of recording microphone stand; Fix the microphone on the shock mount by pinching the clip of shock mount.

Package Contents:

1 x NW-7000 USB Condenser Microphone(Black)

1 x Adjustable Suspension Scissor Arm Stand and Mounting Clamp

1 x Pop Filter

1 x Shock Mount

1 x USB Cable(Blue)

1 x Ball-type Anti-wind Foam Cap

• KIT INCLUDES: NW-7000 USB Condenser Microphone(Black), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap
• NW-7000 USB CONDENSER MIC: Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source; Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations
• NW-35 ADJUSTABLE ARM STAND: The adjustable scissor arm stand with mounting clamp is made of all metal construction, sturdy and durable; The adjustable arms can be fold up and easy for you to carry around; The mounting clamp can attach to tables, desks, shelves, counters, etc; Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc.
• METAL SHOCK MOUNT: Features an adjustment with locking knob and can effectively reduce handling noises; The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit
• WIDE COMPATIBILITY: Can be used with Mac without installing driver and Windows 2000/XP/7/8/10/Vista system; Strong output, no distortion, low power consumption

Product features

Neewer USB Microphone for Windows and Mac with Suspension Scissor Arm Stand, Shock Mount, Pop Filter, USB Cable and Table Mounting Clamp Kit

Kit includes NW-7000 USB Condenser Microphone(Black), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap

The sensitivity of the side of the bidirectional microphone is extremely low which can reduce the sound of nearby instruments in multi-track recording

Please Note:

• 1. The computer and phantom power adapter are not included
• 2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with the desktop computer, the Microphone could be used alone; When connected with a laptop computer, please connect the laptop to an electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone

• The microphone is compatible with most Laptop(Windows7 and above, Mac OSX 10.9 and above)
• Strong output, no distortion, low power consumption;
• Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with a smooth frequency response range
• Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings, and familiar situations.

Pop filter

Block the sound of blasting

Metal shock mount

Reduce noise caused by vibration

Mic windscreen foam cap

Protect the microphone

Scissor arm stand

The microphone can be fixed to a suitable position

Dubbing

Song recording

Online meeting

Product description

PLEASE NOTE: Mic Holder and Mic Stand are NOT included

Description:

This unidirectional dynamic microphone utilizes the advanced moving coil transducer designed for use in professional musical instrument pickup or for vocals.

NW-040 Vocal Microphone is employed with four capsules with extremely effective cardiod (unidirectional) pickup pattern, which ensures high gain before feedback and maximum isolation from unwanted sound sources such as background noise.

Seeing is believing, NW-040 Vocal Microphone offers an extended frequency response for an open,natural sound reproduction. It is ideal for live sound reinforcement and recording.

Specifications:

Color: Black

Type: Dynamic

Polar Pattern: Unidirectional

Connector: Male to XLR Female Cable

Cable Length: 13 ft/4 meters

Package Contents:

1x NW-040 Dynamic Microphone

1x XLR Male to XLR Female Cable

1x User Guide

• CARDIOID MIC: Employed with four capsules with extremely effective cardiod(unidirectional) pickup pattern, and utilizes the advanced moving coil transducer, which ensures high gain before feedback and maximum isolation from unwanted sound sources such as background noise
• FREQUENCY RESPONSE: Offers an extended frequency response for an open, natural sound reproduction. It is ideal for live sound reinforcement and recording
• SOLID AND DURABLE: Robust and rigid metal construction for long time use
• REDUCE NOISE: Pneumatic shock-mount system cuts down handing noise,Very low self noise and high performance
• NOTE: ONLY Include the mic and cable

User questions & answers

Question:	Does this mic requires phantom power
Answer:	No, this is a dynamic microphone and does not require a phantom power supply. It has great sound!
Question:	Does this mic required phantom power
Answer:	No, that microphone is a dynamic mic that does not require a phantom power supply. It has famtastic sound!

• ELIMINATE INTERFERENCE: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording
• FLEXIBILITY & CONVENIENCE: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go
• DURABILITY: Constructed out of premium steel with high-quality screws to ensure sturdiness, and long lasting performance. DIMENSIONS: 16inches /41centimeters wide and 12.4inches/31.5centimeters tall when fully extended out for use
• VERSATILITY: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. NOT include any Neewer microphones, stands, etc. which is purchased separately
• DESIGN: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. NOTE: THIS DOES NOT COME WITH ANY STAND. ADDITIONALLY IT MAY OR MAY NOT FIT YOUR PERSONAL STAND SO WE INCLUDED AND ADAPTER IN BOX, BUT DOES FIT NEEWER BRANDED STANDS 100% GUARANTEE

User questions & answers

Question:	Does it come with a mic
Answer:	No, it does not.
Question:	Does this fit on a swivel arm
Answer:	It can, as long as it has a standard mic holder connection.
Question:	Which mic stand is perfect to hold this sheild
Answer:	Any standard mic stand will work.

Product features

Neewer Microphone Isolation Shield - Foldable Tri-Fold Studio Mic Sound Absorbing Foam Reflector (Black)

The sound absorbing panel is composed of two key components, the folding diffusion shell and the foam absorption lining.

Suitable for professional recording studio music recording, film recording and other production, personal live broadcast, singing, etc.

Specifications:

• Material: Steel & Absorbing foam insulation
• Color: Black
• Weight: 700g

Package Contents:

• 1 x Tri-Fold Isolation Microphone Shield (Black)
• 2 x Metal Thread Adapter

High Density Sponge

• High-density sound absorbing acoustic foam can reduce sound reflection, ensuring a good and clean recording.

Sturdy Steel

• Outer shell is made of heavy duty steel material, which makes it durable and sturdy; And it will filter unwanted noise.

Metal Fittings

• It is designed for microphone-stand mounting and it can accommodate any size microphones. It helps to create a closer, drier, more controlled vocal or instrument recording in many situations. Durable screws make the installation on stand more stable.

Adjustable

• It has two foldable end panels with 145 degree maximum adjustable angle, which allows it to be adjusted inward and makes the panel easy to pack and without occupying too much room.

Product description

NOTE: Mic and Shock Mount are Not Included

Description:

Neewer pop filter shield can effectively diffuses acoustic waves surrounding the microphone and keep the sound from bouncing back towards the microphone, controlling reflected soundwaves.

Unwanted outside audio waves and vibrations, also known as noise and interference, are shielded away from the recording area while your voice finds a clear path to your microphone.

The three panel design features two foldable end panels to allow for angle adjustments, maximizing the absorption of noise

Specifications:

Dimensions: 19.5x23.5x15.5 centimeters/ 7.7x9.3x6.1 inches

Sound Absorbing Foam Thickness: 0.83 inches/2.1 centimeters

Weight 0.88 kilograms/1.94 lbs(tripod included)

Material: Foam, Metal

Color: Black

Package Contents:

1xFoldable Mic Isolation Shield

1xTripod

• FUNCTION: Effectively diffuses acoustic waves surrounding the microphone and keep the sound from bouncing back towards the microphone, controlling reflected soundwaves; NOTE: Microphone and Shock Mount are NOT included
• GREAT PERFORMANCE: Unwanted outside audio waves and vibrations, also known as noise and interference, are shielded away from the recording area while your voice finds a clear path to your microphone
• LIGHTWEIGHT AND PORTABLE: three panel design features two foldable end panels to allow for angle adjustments, maximizing the absorption of noise; Compact design, lightweight construction as well as foldability allow you to carry it easily and take along wherever you go. Weight 0.88 kilograms/1.94 lbs(tripod included)
• THICK SOUND-ABSORBING Foam: including 3 high-density sound-absorbing foams to promote microphone stability; Thickness: 2.1 centimeters/ 0.83 inches
• WIDE USE: folding isolation screen is designed with tripod base, which can be installed on any tripod with general standard 5/8 thread

User questions & answers

Question:	Are these answers and reviews for the item described?? I just noticed 5 different version sizes of this shield
Answer:	I believe the answers address various versions of the shield.
Question:	Would a regular shock mount fit inside this
Answer:	Yes it would
Question:	Can i use the nw-13 with isolation shield with a different mic stand? i already have one, i only what the shield
Answer:	Yes. It will attach to a regular microphone stand.

Product description

Note: The horn is NOT included.

Description:

Adopts Φ16 high quality headgrille and electric circuit, ensures high sensitivity and ultra-low noise

Includes cardioid, omni and super capsules for use in virtually most recording situation.

Widely used for recording studio vocals, acoustic, instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many live sound applications.

Clip Fits most microphone stand with 5/8-inch thread, can firmly hold your microphone in different positions.

Foam windscreen can minimize air interference during recording for more clarity sound.

Foam padded aluminum case ensures high durability and protects your mics and accessories from scratching, which is easy to carry.

Specification:

Element: Φ16 condenser headgrille

Polar Pattern: Uni/super/omni-directional

Frequency Response: 30Hz-18 kHz

Sensitivity:-38±3dB (0dB=1V/Pa at 1 kHz)

Output Impedance: 100Ω±30% (at 1 kHz)

Self Noise: 24dB A

Max. Input SPL: 135dB (at 1kHz≤1% T.H.D)

S/N Ration: 70dB

Power Requirement:

9V-52V Phantom Power

Package Contents:

2 x Pencil Stick Microphone

2 x Cardioid Capsules

2 x Omni Capsules

2 x Super Cardioid Capsules

2 x Microphone Clip

2 x Foam Windscreen

1 x Aluminum Carrying Case

• SUPERIOR SOUND QUALITY: Adopts Φ 16 high quality headgrille and electric circuit, ensures high sensitivity and ultra-low noise
• INTERCHANGEABLE CAPSULES: Includes cardioid, omni and super capsules for use in virtually most recording situation. You can get the sound you want, whether its subtle nuances of a studio recording or the dynamic sparkle of a live orchestra. Easy to mount and remove
• WIDELY USE: Widely used for recording studio vocals, acoustic, instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many live sound applications
• 5/8-INCH MIC CLIP AND WINDSCREEN: Clip Fits most microphone stand with 5/8-inch thread, can firmly hold your microphone in different positions. Foam windscreen can minimize air interference during recording for more clarity sound
• FOAM PADDED ALUMINUM CASE: Made of durable aluminum, ensures high durability. Foam padded inner can protect your mics and accessories from scratching. It is easy to transport and set up your condenser mics

User questions & answers

Question:	How do these compare to the Presonus PM-2 matched condenser mics and for recording drums
Answer:	Go ahead and buy these along wit the mics you specified, these costs pennies compared to.mics you specified. You will see it does not matter, any mic sounds good with professional audio editor program. Even with a low cost mixer, I us them with my drumkit
Question:	can you connect an xlr cable adapter to the mics
Answer:	As in converting XLR to 1/4" connections, I will say no. All condenser mics require phatom power to operate. This is a current of 48 volts that is sent through the 3rd pin of an XLR cable. 1/4" only has two wires (two paths). There is no third wire to route phantom power.
Question:	Would these mics work good for overhead on drums
Answer:	I got them for this exact purpose and have been so impressed by how they're delivering. Granted, I'm not an audio engineer and i can only compare this to what i was getting out of a handful of cheap dynamic mics before this, but for my purposes they seem to pick up everything so cleanly, with the cymbals sounding sparkly and real, but the toms and snare still having plenty of presence too. pairing them with a bass mic is crucial, though. I'll post a review with a little more detail but bottom line is I'm pleased as punch.
Question:	Looks like these are for instruments. Has anyone had good experience using them for vocals? What is your opinion on using these for singing? Thanks
Answer:	I wouldn't used these for live vocal performances but for home recording these are pretty good. With the right amount of compression I was getting some impressive results. Then again i'm into rock music.

Product features

Neewer 2-Pack Pencil Stick Condenser Microphone with Interchangeable Omni, Cardioid and Super Cardioid Capsules

• Adopts Φ16 premium headgrille and electric circuit, ensures high sensitivity and ultra-low noise
• Includes cardioid, omni and super capsules for use in virtually most recording situation.
• Frequency Response: 30Hz-18 kHz
• Sensitivity:-38±3dB (0dB=1V/Pa at 1 kHz)
• Output Impedance: 100Ω±30% (at 1 kHz)
• Self Noise: 24dB A
• Max. Input SPL: 135dB (at 1kHz≤1% T.H.D)
• S/N Ration: 70dB
• Power Requirement: 9V-52V Phantom Power

• The Set Includes: Black Professional Condenser Microphone + Microphone Shock Mount + Ball-type Anti-wind Foam Cap + Microphone Power Cable.
• The professional condenser microphone adopts the exacting complete electronic circuit control. Capture rich, full-bodied sound from sources that are directly in front of the mic.
• The shock mount can effectively reduce handling noise. Good cardioid pickup output and high sensitivity
• The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.

User questions & answers

Question:	Just bought the NW-800 microphone and how will connect it to my Focusrite audio interface be i connects to my laptop
Answer:	Yes it comes with 2 mics and 2 of the fur covers 2 foam covers and cords
Question:	would a behringer 302 usb mixer provide power for mic or do i still need a phantom power
Answer:	The plug in to your computer directly is a 3.5mm jack. Though personally my laptop could not identify it this way as a mic. So I bought a 3.5mm jack to usb adaptor, and it worked instantly with it, once your laptop identifies it, a simple tweak in your audio/recording program to set it as the default microphone is all you need to get it working.
Question:	plugged it into a neewer nw-800 barely has power, with my recording levels set to max on my desktop
Answer:	Probably nothing as long as you have a aux port in the Mac.
Question:	do i have to use the power supply
Answer:	There is an on/off button on the Phantom power supply, make sure that it is on.