13 best onstage vocal mic
An onstage vocal microphone, commonly referred to as a stage mic, is a specialized microphone designed for live performances, concerts, and other onstage vocal applications. These microphones are crucial for amplifying the voices of singers and performers in a way that ensures clear and balanced sound for both the audience and the performers themselves. Here are some key points about onstage vocal microphones:
Dynamic Microphone Type: Most onstage vocal microphones are dynamic microphones. Dynamic mics are preferred for live applications because they are rugged, durable, and capable of handling high sound pressure levels (SPL) without distortion.
Cardioid Pickup Pattern: Stage microphones typically have a cardioid pickup pattern, which means they are most sensitive to sound coming from the front while rejecting sound from the sides and rear. This helps reduce feedback and noise from the stage.
Durability: Onstage vocal microphones are designed to withstand the rigors of live performances. They often have sturdy metal construction and a grille that protects the microphone's diaphragm from damage.
Singing and Speech: These microphones are versatile and suitable for both singing and spoken word performances.They are commonly used by vocalists, singers, public speakers, and announcers.
Handling Noise Reduction: Many onstage vocal microphones feature internal shock mounts or isolation mechanisms that reduce handling noise, ensuring that vibrations from handling the microphone do not interfere with the sound.
Built-In Pop Filters: Some models include built-in pop filters or foam windshields to minimize plosive sounds like "p" and "b" sounds, reducing the need for external pop filters.
XLR Connector: Stage microphones usually have an XLR connector, which is the standard for professional audio equipment. They connect to a mixing console or audio interface using an XLR cable.
Frequency Response: The frequency response of these microphones is tailored to capture the human voice accurately. The response curve is typically optimized for vocal ranges, providing a natural and clear sound.
Wireless Options: In some cases, onstage vocal microphones can be wireless, allowing performers greater freedom of movement on stage. These wireless systems include a transmitter and receiver.
Polar Pattern Variations: While cardioid is the most common polar pattern for stage vocal microphones, some models may offer variations like supercardioid or hypercardioid patterns for more precise sound rejection.
Live Sound Reinforcement: Onstage vocal microphones are a crucial part of live sound reinforcement systems, ensuring that the audience can hear the performer's vocals clearly, even in noisy concert environments.
Microphone Stands: To use these microphones effectively, performers often use microphone stands or mounts to position the mic at the right height and angle for their performance.
In summary, onstage vocal microphones are essential tools for live performances, designed to capture the voices of singers and performers accurately while minimizing background noise and feedback. Their durability, cardioid pickup pattern, and tailored frequency response make them a reliable choice for amplifying vocals in a wide range of live music and public speaking settings.
Below you can find our editor's choice of the best onstage vocal mic on the market
On Stage MS7201B Round Base Microphone Stand, Black
OnStage
Product description
An industry standard! The MS7201 is one of the most popular microphone stands ever made. This classic design has several added features available only from On-Stage, including the 7 lb. sand-cast base which is sturdy enough for road abuse yet light enough to carry. The MS7201 also features a die-cast zinc clutch and 5/8" - 27 solid threaded upper shaft. This model is available with a black shaft (MS7201B) or chrome shaft (MS7201C) and is also available in white (MS7201W. )
From the Manufacturer
An industry standard! The MS7201 is one of the most popular microphone stands ever made. This classic design has several added features available only from On-Stage, including the 7 lb. sand-cast base which is sturdy enough for road abuse yet light enough to carry. The MS7201 also features a die-cast zinc clutch and 5/8" - 27 solid threaded upper shaft. This model is available with a black shaft (MS7201B) or chrome shaft (MS7201C) and is also available in white (MS7201W.)
- One of the most popular microphone stands ever made
- 7 lb. Sand-cast base with rubber padding for reduced floor vibrations is sturdy yet light enough for transport
- Features a diecast zinc clutch for height adjustments from 33"-60" and 5/8"-27 solid threaded upper shaft with positioning washer
- Black finish
- Industry's most innovative stands and accessories
User questions & answers
| Question: | Will I need to buy anything else to hold the mic or everything is included |
| Answer: | As you can see it is the stand only. You will need the mic boom and mic holder. |
| Question: | will this mic stand work/fit the blue microphones yeti |
| Answer: | probably need adapter from any music supply store |
| Question: | Does this fit in rode nt1-a? (for rode users only |
| Answer: | I don't know what a rode nt1-a is but the stand comes two parts, the pole that telescopes and a rather heavy disc that the pole screws into. |
| Question: | The unit I just received did not come with the black pole that attaches to the stand. Is it included with this item |
| Answer: | Mine also came with no shaft. Only the base was included in the package. I've contacted the seller as both the pictures of the product and the product description indicate that the full stand, not just the base, is included in the order. |
On-Stage ASFSS6-GB Dual Screen Microphone Pop Filter
OnStage
Product description
The On Stage ASFSS6GB is a pro-level split screen pop filter that removes unwanted P and B Consonants by providing open space between the two screens. This sophisticated design removes any air pressure that can build up in hoop style pop filters and is very effective in filtering wind-caused plosives. The 11.5 inch gooseneck is constructed from coated brass which allows for precise positioning of the pop blocker between you and your microphone.
- Dual screen
- Non-conductive dual hoops with snap ring stretch the filter taut
- Micro-weave nylon filter diffuses vocal thrusts, without altering its natural sound
- 11.5 inch flexible gooseneck locks into any position without making a noise
- Easy grip C-clamp with nylon tipped screw firmly attaches onto any microphone stand or boom
User questions & answers
| Question: | How do I go about getting this sent back for a new one? It seems like a solid product but mine was delivered damaged |
| Answer: | Yeah this is a solid product my lasted for over 4 years and is still useable. Pretty sure you can contact the seller to send back |
Product features
On-Stage ASFSS6-GB
The ASFSS6-GB Dual-Screen Pop Blocker is a pop filter that removes unwanted 'P' and 'B' plosives by providing open space between the two screens. The first screen diffuses the air burst that causes plosive consonants; the open space between the screens disperses air pressure; and the second screen diffuses the air again and removes remaining plosive sounds. The 11.5-inch gooseneck is constructed from coated brass and allows for precise positioning of the Pop Blocker between you and your mic.
On-Stage ASVS4-B 4" Microphone Pop Filter with Clothes-Pin Style Clip
OnStage
Product description
Prevent annoying vocal thrusts with this adjustable 4" Clip-on voice screen. The specially designed micro-weave nylon filter diffuses the thrust of the voice without altering its natural sound. The surface is also unprinted for consistent filtering. The flexible gooseneck allows for precise positioning of the pop blocker between you and your mic without making a noise while the clip allows for quick set-up.
From the Manufacturer
Prevent annoying vocal thrusts with this adjustable 4" clip-on voice screen. The specially designed micro-weave nylon filter diffuses the thrust of the voice without altering its natural sound. The surface is also unprinted for consistent filtering. The flexible gooseneck allows for precise positioning of the Pop Blocker between you and your mic without making a noise while the clip allows for quick set-up.
- 4" pop filter suppresses P's, B's and breath noise
- Improves vocal recordings
- Helps protect microphone from moisture
- 6" Gooseneck with clothespin-style clip
User questions & answers
| Question: | Could this be attatched to the Blue Yeti |
| Answer: | Yes, here is a package that includes it: https://www.amazon.com/Blue-Platinum-Microphone-Headphones-Stopper/dp/B017RW1QDS?ie=UTF8&me=&redirect=true&ref_=olp_product_details |
Product features
On-Stage ASVS4B 4 Inch Pop Filter
Prevent annoying vocal plosives from ruining your recording with this adjustable clip-on voice screen. The On Stage ASVS4B 4 inch pop filter features a plastic hood, and a micro-weave black nylon diffuser. A perfect and must have accessory for the active vocalist! With support from the gooseneck and clothespin-style shaft clip, this On Stage pop filter provides proper placement in front of the microphone. Easily clips onto microphone or boom stand.
On-Stage Foam Ball-Type Microphone Windscreen, Black
OnStage
Product description
Protect your mics against wind interference and singers' spit with an On Stage Foam Ball-Type Mic Windscreen. Designed for normal sized handheld mics similar in design to a Shure SM58, these colorful foam windscreens fit most mics. They are not designed for use with headset microphones. For nearly 20 years, The Music People! Inc. has been one of the nation's leading suppliers of microphones and pro audio equipment. The Music People! Inc. also owns and manufactures On-Stage Stands support stands. Founded on a promise of quality, innovation and customer service, The Music People! Inc. is committed to the needs of music professionals throughout the world.
- Protect your mics against wind interference and singers' spit
- Designed for normal sized handheld mics similar in design to a Shure SM58
- Colorful foam windscreens fit most mics
User questions & answers
| Question: | does it work with the blue yeti |
| Answer: | I bought this for my blue yeti and it was a true waste of money for that purpose. Even after spending 15 minutes trying to carefully coax it on, it still tore a little bit and didn't fully cover the microphone or do ANYTHING to improve the sound quality. I would highly recommend spending the extra $6 on this product instead of wasting $3 on this one: https://smile.amazon.com/gp/product/B085RN4THZ/ |
| Question: | work for h |
| Answer: | Yes, it's fit 100% without any problem |
| Question: | Can this fit on a microphone behringer XM |
| Answer: | Yes. The On Stage foam windscreen is designed to fit perfectly on microphones of this type. |
| Question: | Does this fit on the Zoom H4n |
| Answer: | Yes, but you'll need to stretch it a little bit to get over the body and not just the mics |
Product features
On-Stage ASWS58-BK
Reduces the occurrence of wind, breath sounds and popping noises. Also keeps your mic clean and helps extend it’s lifetime. These windscreens will fit most standard mics and are available in black, red and blue.
Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Today, professionals and amateurs all over the world put their trust in On-Stage Stands.
On-Stage DS6213 Desktop Gooseneck Microphone Stand
Product description
This gooseneck desktop mic stand makes mic adjustments quiet and effortless, while the sand case U-shaped base saves on valuable desk space. The removable gooseneck features 5/8" - 27 threading on both ends.
From the Manufacturer
This Gooseneck Desktop Mic Stand makes mic adjustments quiet and effortless, while the sand case U-shaped base saves on valuable desk space. The removable gooseneck features 5/8" - 27 threading on both ends.
- Removable gooseneck features 5/8" - 27 threading on both ends
- Gooseneck allows for quiet and effortless mic adjustments
- Solid Sand cast base with three non-slip rubber feet for stability
- Music people proprietary product like On-Stage stands and the others
- Industry's most innovative stands and accessories
- Neck is 5/8 inch- 27 threading on both ends
- Base Spread: 5.6 in. x 6.75 in.
User questions & answers
| Question: | Is this 1/8 phono plug or usb connection |
| Answer: | Neither. This is a microphone stand with a threaded adapter on the end for screwing on a microphone clip. This will not plug directly in to any microphone. |
Product features
On-Stage DS6213
This Gooseneck Desktop Mic Stand makes mic adjustments quiet and effortless, while the die-cast U-shaped base saves on valuable desk space. The removable gooseneck features 5/8 inch - 27 threading on both ends.
Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Today, professionals and amateurs all over the world put their trust in On-Stage Stands.
On-Stage MSA9508 Posi-Lok Sidemount Microphone Boom
OnStage
Product description
A must-have for instrument making! The adjustable side mount boom grips to any round shaft with a nylon tipped tightening screw that won't damage the shaft. This 7" Mini-boom comes complete with two 52-teeth disks that rotate 300° and grip securely together. Built with an ergonomic knob adjustments are simple and easy.
- This 7" mini boom clamps to any mic stand and is ideal for miking applications calling for a fixed position in a limited amount of space
- Comes complete with two 52-teeth disks that rotate 300° and grip securely together
- Our versatile Posi-Lok design enables virtually limitless mic angles and securely locks in place
- Ideal for fixed-position miking where space is limited
- Posi-Lok adds versatility to standard 5/8"-27 mic applications enabling a wide array of miking angles
- Round ergonomic tightening knob facilitates quick and easy angle adjustments
- Clamps to any round shaft with a nylon-tipped tightening screw that won't damage the shaft's finish
User questions & answers
| Question: | question will this hold an audio technica 2050 mic |
| Answer: | I would think so. It's small but very strong tubing. It locks very positively with gear type teeth. It will not creep down like a friction disc lock. |
| Question: | What is the largest diameter pole I could clamp this to |
| Answer: | Don't know the largest, but have clamped it to mic stands and cymbal stands for both acoustic and vdrums and have been more than satisfied! I am a singing drummer and I attach an ipad mount to it to for lyrics, which only clamps to a max of a mic stand. |
| Question: | If I use this to clamp a mic to the vertical stand on which my ipad is mounted, will there be a proper distance for reading charts from the ipad |
| Answer: | OK, so you are trying to mount your IPod, to a mic stand, along with a microphone. It am depends upon the type of microphone you are using. The closer the guitar is to the microphone, the better the sound will be. As far as the Ipod; how's your vision ? |
| Question: | Will this hold a bluebird blue mic |
| Answer: | This is just a mic stand extension that attaches to a mic stand. You need to screw on a mic clip or shock mount onto it to hold a mic. If you are asking will it carry the weight of that mic, my guess would be yes but it is intended for lighter weight pencil mics to mic a guitar while you stand. |
Product features
On-Stage MSA9508
A must-have for instrument miking! The adjustable side mount boom grips to any round shaft with a nylon tipped tightening screw that won’t damage the shaft. This 7 inch Mini-Boom comes comes complete with two 52-teeth disks that rotate 300 degree and grip securely together. Built with an ergonomic knob adjustments are simple and easy.
Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere.
On-Stage MS7701B Tripod Microphone Boom Stand
OnStage
Product description
Our best selling stand! This Euro boom boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, This stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.
- Our best selling stand, the MS7701B features a steel-reinforced plastic leg housing which offers less weight and exceptional strength
- Folding legs with plastic endcaps for durability and reduced floor vibrations
- Steel midpoint locking clutch adjusts height from 32" to 61.5"
- 30" removable boom arm allows for easy positioning
User questions & answers
| Question: | Do I need to buy a microphone mount for this? Will any fit on there |
| Answer: | Yes, you need a mount. There are several on amazon - look on the stand page under what other people bought ..., or do a search of MS7701 microphone adapter or mount. |
| Question: | will the stand work with a blue yeti |
| Answer: | It absolutely does. This stand screws in perfectly to the Blue Yeti, and it hold the mic up no problem. Just make sure you tighten all the screws. |
| Question: | Would this be too heavy to use as a boom mic stand for a movie |
| Answer: | Actually it's too light and tends to fall over. It also would be a terrible way to hold a boom mic. If you need a low budget boom mic holder use a painters extension pole and rig up a shock mount from the mic from rubber bands and PVC pipe cult into rings. |
| Question: | Can you unscrew the boom arm and use the base as a normal vertical microphone stand? Does the vertical part end in a standard 5/8" thread |
| Answer: | Hi Kevin. Sorry for the late response. Yes you can unscrew the boom. The base of the stand is wider than a standard round base so you would have to be careful not to step on or bump the base leg as you would be standing closer to the microphone stand without the boom extension. Hope this helps. |
Product features
On-Stage MS7701B
Our best-selling stand! The MS7701 is designed to go wherever your music takes you. This model boasts hybrid sheet metal and composite leg housing, making it lightweight and unbreakable. A removable boom arm and fold-flat storage/portability makes this stand a must for every member of the band. This model is available with a black shaft (MS7701B) or chrome shaft (MS7701C).
On-Stage MA-100 3/8" Male to 5/8" Female Mic Screw Adapter
OnStage
Product description
MA100 features 3/8" male to 5/8" female for use with mic stands with European 3/8" threads.
From the Manufacturer
3/8" male to 5/8" female for use with standard mic stands and mic clips/microphones with European 3/8" threaded inserts. On-Stage is a leader, changing the way musicians display, support, and protect their prized instruments and equipment. Music People proprietary product like On-Stage Stands and the others, Industry's most innovative stands and accessories.
- Our MA-100 3/8" Male to 5/8" Female Mic Screw Adapter quickly and easily allows European booms and accessories to fit standard stands.
- This adapter features a knurled outer flange for ease of tightening and loosening. Chrome finish.
- Converts mic stands from 5/8" male to 3/8" male threading
- Knurled outer flange increases grip for ease of tightening and loosening
- Enables use of standard mic stands with European mic accessories
User questions & answers
| Question: | Can I use this to attach the apogee MiC to the end of the onstage ms7701 boom stand |
| Answer: | Yes ... I believe these are universal so you should be able to use it with any mic and any mic stand. Worked great for my setup |
| Question: | Does anyone know if this will work for mounting the small satellite speakers of the HK LUCAS NANO 300 PA onto standard US mic stands |
| Answer: | I attempted to quickly determine the threads used in mounts of the mentioned satellites but failed to find that information. So you can best answer, if you are a current owner, by measuring the threads on the base of your speaker. It is more likely those are M8 (metric) than 3/8".Even assuming the threads do fit, you may want to consider a more robust solution.It appears these units, though small, are heavier than I would recommend mounting with only an adapter like this one; however if you used this only to retain the unit on a larger base, that should work. The stress on this adapter might break it or fail to hold your (expensive) satellite properly. |
| Question: | I think this would work but i wanted to be sure. Would this connect the Audio-Technica AT2020 USB Mic to the On Stage MS7701 Tripod Boom Microphone Stand |
| Answer: | Not sure. This is basically a photo tripod adapter for mic stands. This would allow you to put a camcorder or other camera on a mic stand. Or in my case, a Tascam digital audio recorder. |
| Question: | Will this fit a Rode videomic go |
| Answer: | I use my adapter with a Rode Videomic Pro, so it is a safe bet that it will also work with the Videomic Go. The 3/8" plastic thread on the videomics is a bit flimsy, IMO, so I was concerned that frequent attaching and detaching of my mic to this adapter might end up with the mic cold shoe or threads getting damaged. I got a Rode PG1 cold shoe handgrip and attached that (with it's metal 3/8" thread in the bottom) to this adapter on my boom pole, and now both my camera and boom pole have shoe mounts that I can attach the mic to, making it much easer to move the mic between mountings. I also end up with a good handgrip so I have 3 ways to mount my mic depending on the situation. |
Product features
On-Stage MA100
3/8 inch male to 5/8 inch female mic screw adapter for use with standard mic stands and mic clips/microphones with European 3/8" threaded inserts.
Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Today, professionals and amateurs all over the world put their trust in On-Stage Stands.
On-Stage MY550 Microphone Extension Attachment Bar
OnStage
Product description
On Stage MY550 microphone extension attachment bar is a perfect choice for drums, cymbals or an acoustic guitar. This attachment bar fits most standard microphone stands and booms, it will even clamp to the side of most amplifiers! The On Stage adjustable clamping bracket with tightening knob attaches to microphone stand. The microphone attachment bar features a nylon tip screw for a secure hold without damaging the finish of your valuable equipment! Fits industry standard 5/8 inch-27 threaded microphone clips.
From the Manufacturer
A perfect choice for miking drums, cymbals or an acoustic guitar. This attachment bar fits most standard mic stands and booms; it will even clamp to the side of most amps! The adjustable clamping bracket features a nylon tip for a secure hold without damaging the finish of your equipment! Fits industry standard 5/8"-27 threaded mic clips.
- Perfect choice for adding another mic to your stand for miking drums, cymbals or an acoustic guitar
- Fits most standard mic stands and booms - it will even clamp to the side of most amps
- The adjustable clamping bracket features a nylon tip for a secure hold without damaging the finish of your equipment
- Standard 5/8"-27 threaded ends will fit most standard mic clips and booms
User questions & answers
| Question: | Can this hold up a Blue Yeti microphone |
| Answer: | It shouldn't have a problem holding up any mic it's not flimsy. |
| Question: | This says it has a nylon tip on the tightening knob so as not to damage equipment, but I don't see one in the images. Does it actually have one |
| Answer: | I think it does. It's black, like the screw, and doesn't give way to a fingernail (in fact, I would hope not!), but it's smaller than the screw, so does look like something special on the tip. Also, the tip is concave, to match the shaft it's attached to. I don't know if that slight indent is molded in, or if it's the result of my tightening. Anyway, it attaches securely without damage. |
| Question: | Will this fit on a bar with 1 1/2" diameter |
| Answer: | I don't think so -- I just measured mine, and the clearance for the pole is scarcely 1.5". But as you can see in the photo, the far side of the clamp is in a V shape, and I think a 1.5" diameter pole would not be able to take advantage of the full depth of the gap. Further, the center line of the screw is only 5/8" from the hard edge, so even if you could get the pole in there, it would be off center and the screw would be pushing askew on the pole rather than the center. |
| Question: | What is the largest diameter bar this would fit onto |
| Answer: | I have mine on a typical mic stand with about a 3/4 inch diameter and it would go way smaller or bigger. It's got a V-shape to fit one side of the bar, and about a 1 1/2 inch thumb screw that tightens down from the other side. So very wide range of fit from about 3/8" to nearly 1 1/2". |
Product features
On-Stage MY550
A perfect choice for miking drums, cymbals or an acoustic guitar. This attachment bar fits most standard mic stands and booms -- it will even clamp to the side of most amps! The adjustable clamping bracket features a nylon tip for a secure hold without damaging the finish of your equipment! Fits industry standard 5/8”-27 threaded mic clips. Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere.
On-Stage MB7006 6-Space Microphone and Accessory Bag
OnStage
Product description
On-stage gear microphone bags make protecting and transporting your valuable microphones easier than ever. This fully padded bag encases a dense foam insert to accommodate most popular handheld mic designs, while a separate compartment with a removable hook-and-loop divider provides room for cables and clips. An additional zippered mesh pocket incorporated into the lid is perfect for storing sheet music or similar items.
- Fully padded with dense foam insert accomodates up to 6 microphones
- A separate compartment with a removable hook-and-loop divider provides room for cables and clips
- An additional zippered mesh pocket incorporated into the lid is perfect for storing sheet music or similar items.
- Features carry handles and adjustable/removable shoulder strap
User questions & answers
| Question: | Will my receiver for the wireless shure blx 288 mics |
| Answer: | The storage area is approx 10" x 10" x 7". So the receiver will not fit there. However, you could remove the velcro dividers and flip the foam mic holder sideways and then it would fit across the width. |
| Question: | Will this work with wireless (longer) mics as well |
| Answer: | I think it probably would. There is a little over 2 inches left below my mics which are standard size. I would measure a standard one and a longer one to make sure. |
| Question: | Will this work for sure sm58s |
| Answer: | Yes. I have a sure 58and it fits fine. I like the bag a lot. |
| Question: | How many mic cables would fit into the side area |
| Answer: | It would really depend on the length of the cables. 4 should be no problem. |
Product features
On-Stage MB7006 6-Space Microphone Bag
On-Stage Gear Microphone bags make protecting and transporting your valuable microphones easier than ever. Thick foam inserts accommodate most popular handheld mic designs, while a separate compartment with a removable hook-and-loop divider provides room for cables and clips. An additional zippered mesh pocket incorporated into the lid is perfect for storing sheet music or similar items.
On-Stage Bass Drum Boom Microphone Stand (MS7920B)
OnStage
Product description
A heavy, casted "U" Shape base gives this stand The stability of much larger models, while its compact shape makes for easy positioning in those tight on stage spaces.
From the Manufacturer
A heavy, casted "U" shape base gives this stand the stability of much larger models, while its compact shape makes for easy positioning in those tight on stage spaces.
- Compact shape makes for easy positioning in those tight spaces
- 16" Articulating boom provides 320 degrees of easy angle adjustment
- Die-cast steel Clutch provides height adjustments from 8" To 14"
- At 4.5" X 7.5", This heavy-duty "U" Shaped base is small yet stable and sturdy
- Industry's most innovative stands and accessories
User questions & answers
| Question: | Do i need an adapter for this stand? i'm using a bluebird microphone |
| Answer: | The stand has a standard 5/8 x 27 mic thread at the end. I would think the Bluebird has the same with the shock mount.However, the Bluebird is a heavy condenser mic and the stand is rather small. It would tip over easily. I use mine to mic an amp speaker, and I can't extend the arm all the way with a SM-57. I'd recommend against this stand with that mic. |
| Question: | how heavy is the base? The description says 2.92 lbs shipping weight which seems light. I'd be looking to hold an SM58 w/o tipping over |
| Answer: | The weight is actually closer to 7lbs, and it will definitely hold a 58 without issue. But, this is a small boom stand meant really for kick drums, and not something that you'd usually put a 58 on. This is not a full sized mic stand. |
| Question: | Is this item suitable for piano |
| Answer: | No - I would use a floor stand with a full boom to go over the piano and towards the keys to isolate the microphone from the instrument vibrations. You want something adjustable to 4' tall with a boom. This stand is a short stand - OK for a bass drum, cello or maybe a saxophone. |
| Question: | Can you use this with a blue yeti |
| Answer: | Yes, but! The blue Yeti is a heavy mic. You'll be able to use the stand but not extend the arm very far.I picture the stand better suited for a dynamic mic in front of an amp or drum kit. |
On-Stage MS7920B Amp and Bass Drum Short Microphone Stand
Product description
A heavy, casted "U" shape base gives this stand the stability of much larger models, while its compact shape makes for easy positioning in those tight on stage spaces.
- Compact shape makes for easy positioning in those tight spaces
- 16" articulating boom provides 320 degrees of easy angle adjustment
- Die-cast steel clutch provides height adjustments from 8" to 14"
- At 4.5" x 7.5", this heavy-duty "U" shaped base is small yet stable and sturdy
On-Stage MY325 Shock-Mount Dynamic Microphone Clip
OnStage
Product description
When you're on stage, The last thing that you want to shake, rattle and roll is your mic. Designed to reduce the effects of low-end rumble and floor vibrations, The MY325 features a 5/8"-27 Female threaded brass insert in a heavy-duty plastic base. The 25mm opening holds most name brand dynamic microphones and grips your mic with 35lbs. Of pressure!.
From the Manufacturer
When you're on stage, the last thing that you want to shake, rattle and roll is your mic. Designed to reduce the effects of low-end rumble and floor vibrations, the MY325 features a 5/8"-27 female threaded brass insert in a heavy-duty plastic base. The 25mm opening holds most name brand dynamic microphones and grips your mic with 35lbs. of pressure!
- 25mm, fits most handheld dynamic mics
- Reduces the effect of low-end rumble and floor vibrations
- Standard 5/8"-27 female threaded brass insert in a heavy-duty plastic base
- Lifetime Warranty
- Industry's most innovative stands and accessories
User questions & answers
| Question: | Is this clip designed for smaller wired microphones or for a larger wireless mic |
| Answer: | Definitely for that standard wired mic diameters. My Samson wireless mic would not fit, I have this clip for it http://www.amazon.com/Stage-MY110-Wireless-Microphone-Clip/dp/B000AJR50Y |
| Question: | Does it fit with a samson q2u |
| Answer: | This clip is made to fit a standard 25mm microphone such as a Shure SM-58. If your Samson is that size, then yes, it will fit. I looked at the Samson q2u on line and it APPEARS to be the "standard" 25mm size. I would bet it will fit nicely. Try it. You'll not be out much if it doesn't quite fit... but I'm pretty sure it will. I have several of these, and they work great for my mics. Good luck! ~ V.O.R. |
| Question: | Is this a 5/8 inch thread and will it work on the OnStage MS7701B stand |
| Answer: | In the description of the item it says, "The MY325 dynamic shock mount clip features a 5/8 inch-27 female threaded insert in a plastic base with a 25mm opening for dynamic microphones." However I do not know about the "MS7701B stand." It fits perfectly on all my stands, purchased from different sources. |
| Question: | Is this easy to use |
| Answer: | Yes, mounts easily to standard mic stand threads. Provides snug hold of standard size mics (ive used SM58, AKG D5). Does seem to help stage rumble getting picked up by the mic |
Product features
On-Stage MY325
When you''re on stage, the last thing that you want to shake, rattle and roll is your mic. Designed to reduce the effects of low-end rumble and floor vibrations, the MY325 features a 5/8 inch-27 female threaded brass insert in a heavy-duty plastic base. The 25mm opening holds most name brand dynamic microphones and grips your mic with 35lbs. of pressure. The On-Stage MY325 also comes with a Lifetime Warranty.
Latest Reviews
View all
Bulk Ink For Epson Printers
- Updated: 20.05.2023
- Read reviews
Adidas Neo Shoes For Kids
- Updated: 10.05.2023
- Read reviews
Video Camcorder With Hds
- Updated: 19.04.2023
- Read reviews
Gas Spa Heaters
- Updated: 24.06.2023
- Read reviews
Elegant Baby Boats
- Updated: 28.07.2023
- Read reviews