14 best patch cables for pedalboard

Product description

These 6" patch cables are MXR-approved for clean, pure tone. They feature oxygen-free copper conductors and spiral shields to block unwanted interference, PVC outer jackets for flexibility and protection, and flat, low-profile right-angle ends to keep your pedalboard tight and tidy. Trust MXR to patch you through.

• 6-pack of high-quality pedalboard patch cables
• Right-angle, low-profile connectors save pedalboard space
• Oxygen-free copper conductors ensure a clear signal
• Spiral shielding protects against signal interference
• Flexible, durable outer jacket protects against kinks

User questions & answers

Question:	Do they have a warranty? Or guarantee
Answer:	Not that i know of, but I never really double checked. Sorry

Product description

Ernie Ball flat ribbon patch cables feature a high-quality design made with superior components that are built to last. The flat cable design and low-profile connectors allow for optimized pedalboard layout and cable routing. Multiple shielding materials preserve the signal with low handling noise, and the durable PVC jacket exterior ensures long-lasting performance.

From the Manufacturer

Ernie Ball flat ribbon patch cables feature a high-quality design made with superior components that are built to last. The flat cable design and low-profile connectors allow for optimized pedalboard layout and cable routing. Multiple shielding materials preserve the signal with low handling noise, and the durable PVC jacket exterior ensures long-lasting performance.

• Optimized flat cable and connector profile ideal for pedal boards
• 99. 95% oxygen-free copper to resist corrosion
• Dual-shielded design for durability and low noise
• Clear tone with crisp highs, tight mids, and rich harmonics
• Roadworthy construction

User questions & answers

Question:	Are these cables soldered
Answer:	I think they are. Haven’t disassembled them. But they are perfectly quiet. Much better than the cheap Chinese ones I replaced.
Question:	Is the length listed for the actual cable portion or is that connector to connector
Answer:	The connectors are at 90 degree angles. So it’s both. Connector to connector and the length of cable itself.
Question:	Can two of these fit into a stereo boss pedal? for example, an rc
Answer:	They should I think boss staggers the inputs (that’s how it is on my boss chorus pedal)

Product features

Flat Ribbon Patch Cables

Ernie Ball flat ribbon patch cables feature a high-quality design made with superior components that are built to last. The flat cable design and low-profile connectors allow for optimized pedalboard layout and cable routing. Multiple shielding materials preserve the signal with low handling noise, and the durable PVC jacket exterior ensures long-lasting performance.

Twist, bend, wrap, plug, and play.

4 lengths to fit all your pedalboard needs.

Tough jacket for durability.

Product description

Don’t let poor quality instrument cables ruin your next performance or recording session. Rely on the durable, reliable D’Addario Accessories (formerly Planet Waves) PW-CGTP-305 Classic Series Patch Cable to make sure your tone stays intact. Exclusive In=Out Technology combines low capacitance and top-quality construction for a cable with the purest signal transparency and the longest life possible. Right-angle 1/4” plugs are an ideal fit for linking pedals together and assembling a pedalboard to your exact specifications. Create easy to work setups so you can just focus on the music.



Classic Series patch cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. With a single-molded strain relief plug these cables provide added durability and reliability. A 90% spiral shielding also helps to eliminate virtually all handling noise. The 0.5’ (6”) stage and studio patch cable comes in a pack of three and is also available in 1’ and 3’ lengths.



For over 20 years, D’Addario has been leading the industry in innovative and problem-solving products that serve musicians worldwide. D’Addario Accessories are proudly made in a state-of-the-art manufacturing facility to the most stringent quality controls in the industry. The D’Addario family’s heart, soul and love for making music is put into every accessory we create, and we never stop inspiring performance.

• IN=OUT TECHNOLOGY – Exclusive In=Out Technology combines low capacitance and top-quality construction for a cable with the purest signal transparency and the longest life possible.
• DURABLE, RELIABLE AND QUIET - Classic Series patch cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. With a single-molded strain relief plug these cables provide added durability and reliability. A 90% spiral shielding helps to eliminate virtually all handling noise.
• PERFECT FOR PEDALBOARDS – Right-angle 1/4” plugs are an ideal fit for linking pedals together and assembling a pedalboard to your exact specifications. Create easy to work setups so you can focus on the music.
• PRODUCT INFO – The 0.5’ (6”) stage and studio patch cable comes in a pack of three. It has 1/4 right-angle plugs. Right-angle cables also available in 1’ and 3’ lengths.
• D’ADDARIO ACCESSORIES - For over 20 years, D’Addario Accessories (formerly Planet Waves) has been leading the industry in innovative and problem-solving products that serve musicians worldwide. D’Addario Accessories are proudly made in a state-of-the-art manufacturing facility to the most stringent quality controls in the industry.

User questions & answers

Question:	As others mentioned, why do I keep getting generic non Planet Waves cables
Answer:	Sound great, good price point, and are constructed well
Question:	How would these be connected in a wireless setup
Answer:	I dont understand your question. A wireless guitar unit used with pedals doesnt effect how the pedals are connected to eachother. One pedal is linked to another using these patch cables.The output of your wireless receiver gets plugged into your first pedal. The output then goes through your pedal chain, you then use a patch cable (longer than these) to go from the last pedal into the amp.
Question:	Are these good for plugging a pedal directly into an amp? Ex. Are they long enough
Answer:	No, they are very short! They are for plugging pedals into other pedals. You would still need a regular length guitar cable that plugs in from amp to pedal, and then you would use the three short cables to link several pedal together, and then a final regular length guitar cable to plug in to your instrument. I hope that helps!
Question:	Would this be the kind of pedel i would use for nirvana's smells like teen spirit
Answer:	Vox vt(15-100)x modeling amps compatible with the tone room app have a setting to sound exactly like smells like teen spirit without any pedals once you plug it into your computer tablet or phone with the app.

Product features

CLASSIC SERIES PATCH CABLES

D'Addario Classic Series Patch Cables provide the ultimate in quality and value.

Features:

• Low capacitance for pure signal transparency
• Molded plugs offer protection and strain relief
• Shielding provides noise rejection for quiet operation
• Available in varying lengths

SIGNAL TRANSPARENCY

Exclusive technology combines low capacitance and top-quality construction for a cable with the purest signal transparency and the longest life possible.

DURABLE RELIABLE QUIET

Classic Series patch cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. With a single-molded strain relief plug these cables provide added durability and reliability. A 90% spiral shielding helps to eliminate virtually all handling noise.

PERFECT FOR PEDALBOARDS

Right-angle 1/4” plugs are an ideal fit for linking pedals together and assembling a pedalboard to your exact specifications. Create easy to work setups so you can focus on the music.

Classic Series Patch Cables

D'Addario Classic Series Patch Cables provide the ultimate in quality and value.

Custom Series Patch Cables

D'Addario Custom Series Cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Encapsulated and impenetrable soldering points with double-molded strain relief provide maximum durability and reliability. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

American Stage Patch Cables

D'Addario American Stage Series cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

Flat Patch Cables

D’Addario’s Custom Series Flat Patch Cables help you optimize pedalboard space by allowing closer pedal placement while accurately transferring the subtle details of your sound. These cables have an oxygen-free coaxial copper conductor with two layers of noise-rejecting shielding, formulated for extremely low capacitance, so your instrument’s brilliance, presence, and character transmit with the utmost transparency. The Flat Patch Cable plugs feature the patented Geo-Tip, which ensures a secure connection with any instrument, pedal, or amplifier. Encapsulated soldering points and molded strain relief combine to deliver the ultimate long-lasting, high performance patch cable.

Product description

Solderless Guitar Pedal Patch Cable Kit 6 Pack For Custom Pedalboard Is your pedalboard a mess? Is it hard to get your pedal chain into the order you need them to be in because you don't have the right length patch cable? This is a great solution to tidy up your pedal board. With compact right angle connectors, you can maximize that precious real estate on your pedalboard. You customize the length of each cable to the length you need it to be. No soldering required. All tools and instructions needed are supplied in each kit.

• (6 pairs) Solderless 1/4" Mono Plugs (enough to make 6 cables)
• (12) feet of high-quality coaxial shielded instrument cable
• Small Phillips Screwdriver
• Cable cutter
• Instruction sheet

User questions & answers

Question:	is the cable shielded
Answer:	Thank you for your message. Yes the cable is shielded. Please let us know if there's anything else we can help with. Feel free to contact us anytime. We are always happy to assist people with questions or concerns or even if they just want to talk shop. Thanks

• Get that ideal sound! The 1/4 inch thickness of the plug offers the best possible sound transfer thanks to its quality shielding. No more interference, rustling and other unwanted noises when you play!
• Designed for excellence! The new In-Out technology ensures that there is minimal signal loss, as it ensures low capacitance. Perfect sound for an ideal price!
• Durable and efficient! The 0.5 ft long guitar cables will suit most of your needs with minimal sound loss. The right angle plug is ideal for pedalboards. These cables will serve you for years!
• Highest quality! The best cables are not determined by price, but by design and careful manufacturing. We ensure ideal sound without breaking the bank.

User questions & answers

Question:	Has anyone gigged with these cables? Honest review
Answer:	I used them to connect my effects on the pedal board.... I have not encountered any problems with them.
Question:	Can i used these for my dj equipment
Answer:	They are a short patch for effects pedals. I have not had any trouble with them or added hiss.
Question:	Says ideal for saxophone? So it just plugs right in
Answer:	Correct, they are just Patch Cables or Male to Male Instrument plugs used between effect pedals or boxes.
Question:	Are these truly 6" tip to tip? Some are measured to the base of the housing
Answer:	Tip to tip is 8 1/2 " . Base to base is 6" .

Product description

Your pedal board is as unique as your playing style. That’s why we made a Solderless Pedalboard Cable Kit that allows you to easily customize the length of five patch cables. Building your pedalboard and guitar tone has never been so easy!



Cable width measures 0.16". Connector cap measures 0.39" x 0.47”. Kit includes 10 connectors, 10ft of cable and 1 magnetic screwdriver.



Instructions

1. Cut desired cable length using scissors or exacto knife. Be sure to cut the cable straight and not on an angle.

2. Remove screw on the connector cap, detach cap and firmly insert the cable. To make straight cables, simply leave the connector caps off.

3. Replace the connector cap and tightly refasten the screw. Test each cable individually before wiring up your pedalboard.



Troubleshooting

If a cable is not working or there's a loss of tone or volume, tighten the screw as firmly as possible until a connection is made. If that doesn't work, try backing the screw off a little. If there's still no connection, make sure the cable is cut straight and firmly inserted into the connector.



100% satisfaction guaranteed or your money back within 30 days.



Order Today!

• EASY TO ASSEMBLE - Quickly cut your desired cable length with scissors and connect the 1/4" jacks using the magnetic screws and screwdriver. No cable stripping required.
• CUSTOMIZABLE - Tailor the length of 5 low profile patch cables with 10ft of cable and 10 right angle solder-free connectors. To make straight cables, simply leave the connector caps off.
• SUPERIOR TONE - Shielded oxygen free copper cable and gold tipped connectors resist corrosion and provide low capacitance for pure signal transparency.
• BUILT TO LAST - Simple yet rugged design to withstand abuse on stage or in the studio.
• SATISFACTION GUARANTEED - If you're not 100% satisfied with your purchase, we'll refund your money no questions asked within 30 days. Crosby Audio is a proud Canadian company.

User questions & answers

Question:	I am noticing a slight drop in quality with these cables. I swapped out 4 different connector heads, no change. Am I doing something wrong
Answer:	I don't really know, I've bought 2 sets with 4 months separation and both were good. Try this, cut the wire as clean as you can, and take a look with a magnifying glass and good light, what did happen to me with both sets is a tiny piece of shielding was making contact with the signal (center) part when assembling because the wire wasn't cut clean enough. Hope this helps.

• 【QUALITY MATERIAL】- OTraki Z type pedal couplers is made of gold-plated copper, anti-aging, rustproof, solid and durable for long time use. It is recommended to connect between two pedals with similar height.
• 【GREAT SIGNAL TRANSMISSION】- Designed for couple guitar effects pedal boards with equal jack placement, shortening your signal chain as much as possible and ensure low noise, low attenuation and superior signal transmission.
• 【WORK WITH EFFECT PEDAL BOARD】- 1/4 inch (6.3 mm) male to 1/4 inch (6.3 mm) male couplers, compatible for most brands of effects on the market. Pay Attention: 1/4-inch TS plugs are slightly off of the perpendicular to the centers, (not right angle, about 87° - 88°).
• 【COMPACT】- Smaller than the conventional guitar power patch cable, save space of pedal board and keep pedals tidy.
• 【WHAT YOU CAN GET】- 4 PCS pedal coupler connectors come in a package, very practical, perfect kit for your guitar.

User questions & answers

Question:	Can they be used to connect Boss pedals
Answer:	I have a couple of Boss pedals and they work fine. You'll have to connect these and juggle them until both pedals are at the same level on the floor. Don't attach them while they're velcroed to a pedalboard.
Question:	Do these line up mini pedals like mooer joyo and tone city pedals perfectly or are they offset slightly
Answer:	They are a little off set.... due to the way they are constructed..... to marry them straight you need the buy the ones that go straight across .... I have both

Product description

New Professional Studio Series Noise Free Cables by GLS Audio. They have a 6mm thick, high quality, flexible rubber jacket (not that cheap stiff plastic jacket like others sell). They are heavy duty Noise Free with Full Metal 1/4" plugs. These cables have an insulated copper conductor plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. 15ft of cable provided.

• Right angle low profile design takes less room on your board or rack
• Heavy Duty 15ft of 6mm Flexible Rubber Jacket
• Full Metal Casing GLS Audio 1/4" Right Angle Low Profile Plugs
• Heavy Duty and comparable to Switchcraft and Neutrik
• High Quality Noise Free Performance!

User questions & answers

Question:	Does the kit come with a cable cutter
Answer:	No, it does not include a cable cutter. The quality of the cable is decent as were the right-angled plugs. I recommend that you get small-gauge solder to simplify the soldering job.
Question:	Any word on gls using higher quality cabling? i know a lot of the older reviews ripped on the poor quality cable
Answer:	No problem here everything A+ Don't know about long cables but for patch these are good. The shorter the better
Question:	Is this kit solder-less
Answer:	No, you need solder skills. Makes for nice cables if get it right though.
Question:	Are your products made in the USA
Answer:	Yes all GLS products are made in the USA. The GLS Pedal Board Kit uses the best 90 cable ends I have ever used. The Cable is very good Quality as-well.

Product description

BARDESTU 6 Inch Black Blue Guitar PATCH CABLES ideal for a myriad of patching applications. You can never need other Cables!

The Tangle-free Nylon Braided Cord with aluminum connector which is more durable, more flexible and more sturdy than other normal cables.



●● SPECIFICATION ●●

LENGTH -- 6inch

RELIABLE GUITAR EFFECT CABLES Gauge -- 24 AWG

Wire Specification -- 2/20*0.12mm oxygen-Free copper

Product composition -- Aluminum foil pure copper wire environmental PVC



●● GUARANTEED ●●

If you have any problems or any suggestion about our product, please contact us, we will reply you soon



●● What do you get? ●●

- 2 x 6inch Guitar Effect Pedal Cables

- 4 x Colorful Guitar Picks

• ▶ LOW NOISE SIGNAL STABILIZATION -- The BARDESTU Guitar Pedal Connectors With 24AWG (OFC) center conductors provides enhanced signal transfer,the PVC insulation material and the high-density stranded copper double shield provide noise rejection for quiet operation
• ▶ BUILT TO LAST -- Molded guitar pedal board cables with standard 1/4 inch right angle plugs, which is designed to interconnect electric guitar pedal effects. BARDESTU design plugs allow close spacing of pedal effects on pedalboards.
• ▶ FLEXIBLE CABLE-- BARDESTU Guitar Patch Cables 6 inch long for easy fit. They feature ultra low capacitance which lends to a pure signal transparency. Good connection cable transmits high fidelity signal to the equipment
• ▶ RELIABLE GUITAR PATCH CABLES -- Our Pedal cables undergo extensive listening tests to ensure they standards of clarity, accuracy and quality. If you want great guitar cable at a very affordable price, BARDESTU Professional Guitar Effect Pedal Cable is your best choice; And will be presented 4pcs colorful guitar picks, make your playing more exciting
• ▶ GUARANTEED FOR LIFE -- If You Are Not Satisfied with Our Pedal Patch Cables, Please Send Them Back To Us For a Full Refund in Time. We Hope to Be Better. Add to CART NOW...

User questions & answers

Question:	Are these made in China
Answer:	Yes, the guitar cable is made in China, and it's pretty well made. Also it came with 4 guitar picks, that will good helperful for you.
Question:	Will these fit into a stock Telecaster jack
Answer:	Yes. These are standard audio cable with nice color
Question:	Will this connect to an effect pedal
Answer:	Of course. It will connect to any effect pedal with a 1/4" jack, and this effect patch stort cable - 6 inch will be best for you

• Save Space - MIMIDI Low-profile guitar pedal cable is designed specifically for connecting effects pedals.this very compact size and flexible cables ensure effective use of all space on your pedalboard.
• Flat Pancake Design - This guitar pedal patch cables with Right-angle 1/4" TS nickel plated plugs,Pancake ends can be simply plug into guitar pedal, fit tight and complete;Solid,stable, Antioxidant, rustproof for extremely long life and bring out the true tone of your instrument.
• Professional Guitar Pedal Cords - Made of Oxygen Free Copper (OFC), ultra-pure OFC ensure higher levels of signal transparency & quality,clear accuratetransparent tone.Low capacitance of the will always faithfully bring out the true tone of your instrument.
• Noiseless Pedal Board Patch Cables - Triple Shielded Design,Black white Braid Nylon Jacket+ Soft Stretchy PVC Outjacket + Spiral Winding 56/.12 CCS Copper for offering very low resistance,less energy absorbed, less noise interference. Ultra High Density Spiral Shield assures only the intended signal is received. PVC jacket with good flex-life, waterproof and temperature resistant, great for live performance
• 6 Inch Instrument Cable- Wire Length: 6 inch/15cm,total Length include two ends: 8.3 inch/21cm, this pedal cable is design for guitar pedals, also used for other Audio signal transmission of microphone, amplifier, mixing console; Package Include 1 x 6 pack cable

User questions & answers

Question:	Who can tell me Will this guitar pedal cable work well with pedalboard
Answer:	I am using the guitar patch cables on my guitar pedal board and they work very well. the length is perfect for a pedal board,not a lot of spare cable between pedals.
Question:	Will this flat patch cable work well with pedalboard
Answer:	Yes, the pancake ends are so low in profile that you can cram extra pedals on your board ! And this patch cables are very clean and neat
Question:	Will these pedal patch cables good for guitar and bass
Answer:	Yes,these patch cables can be used with either bass or guitar, I have had the patch cables for a while and they are holding up good

Product features

Low-Profile Braided Tweed Guitar Patch Cable

Mimidi performers patch cable, designed to interconnect electric guitar pedal effects;Spiral winding copper wire with conductive PE for shielding can avoid frictional noise;Low-profile, right-angle plugs allow close spacing of pedal effects on pedalboards.

Specifications

• Wire Length: 6 inch/15cm
• Total Length include two ends: 8.3 inch/21cm
• Connectors: 1/4 Flat right angle plugs
• Outjacket Material: Braided Tweed

Flat Pancake Design

• Pancake ends can be simply plug into guitar pedal, fit tight and complete.
• Designed specifically for connecting effects pedals.this very compact size and flexible cables ensure effective use of all space on your pedalboard.

Flexble & Druble

• Ultra Druble PVC Outjacke,good flex-life,Anti-friction and temperature resistant, great for live performance
• Include 6 pcs cables

Repairable Nickel-plated Plugs

• 1/4 Silver TS nickel plated plugs,bring out the true tone of your instrument.
• Solid and stable,rustproof for extremely long life
• Repairable: screwable plugs, you can access the wiring points and solder your own joints if something broke.

Product description

✷ 24 AWG oxygen-free copper (OFC) conductors for enhanced signal clarity and prevents RFI and EMI interference

✷ Multilayer-shielded design for durability and low noise

✷ Full-frequency reproduction and maximum dynamic response via low-capacitance design

✷ Clear tone with crisp highs, tight mids, and rich harmonics

✷ Flexible, durable Braided cable jacket protects against kinks

✷ Fairly easy to disassemble and repair

✷ Can be used with various instruments



✷ Warranty: 30 day money back guarantee & lifetime warranty

✷ Connector 1: TS Male 1/4

✷ Connector 2: TS Male Right Angle 1/4

✷ Jacket Material: Nylon

✷ Outside Diameter: 7.0mm / 0.27 inch

✷ Cable Type: Analog Audio

✷ Length: 6 Inch

✷ Color: Black + Red



✷ What's In The Package:

2 * 6 Inch guitar cable

4 * guitar pick

• ✷Noise Free Design: Canbuau guitar patch cables with 24 AWG 99.95% oxygen-free copper (OFC) conductor and 4 High-density shielding materials, promote optimal signal transfer and help minimize handling noise for clear sound
• ✷Durable & Solid: The red and black fabric weaved gives the guitar cords a distinct vintage appearance, braided cable jacket is durable and solid for lasting performance
• ✷Professional-Grade Connectors: Our guitar patch cables with 1/4 straight and right angle metal connectors, In=Out technology, it has good build quality with stronger connection, flat right-angle ends keep your pedalboard tight and tidy, ideal for recording and live performance
• ✷Universal Compatibility: The guitar patch cables compatible with a variety of instruments and audio components, such as guitar pedals, audio signal transmission of microphone, amplifier, mixing console; Widely used in the recording, stage, live performace
• ✷What You Get & Warranty: 2 pack 6 Inch guitar patch cables with 4 guitar picks; Canbuau all instrument cable provides 30-day money back guarantee & 'No Excuse' lifetime warranty

User questions & answers

Question:	Is it suitable for electric ukulele
Answer:	Yes, Canbuau guitar cord suitable for electric ukulele.
Question:	What is the warranty on this guitar cable
Answer:	Canbuau all instrument cable provides 30-day money back guarantee & 'No Excuse' lifetime warranty.
Question:	Does this guitar cord work to connect an acoustic guitar to an amp
Answer:	Yes, the guitar cable can connect an acoustic guitar to an amp.

Product description

The Planet Waves Pedal Board Kit is the ultimate solution for custom-wiring your pedal board or rack gear. Inferior patch cables can cause signal loss and undesirable coloration to your sound. Planet Waves plugs and cables are specially designed to provide the most accurate and reliable reproduction of your sound from guitar to amp and all points between. Includes 10' of cable, 10 right-angle plugs and a mini cable cutter.



- Solderless plugs connect to cable in seconds, creating exact required lengths easily.

- Road-tested plug connections hold up even the toughest gigging situaiton.

- 24k gold-plated plugs for improved signal flow and corrosion resistance.

- Double insulated cable employs braided copper shield and metalized polyester foil inner shield for 100% shielding coverage.

From the Manufacturer

Custom cut cable to suit your pedal board's layout. The plugs and cables in this kit are specially designed for quick and reliable assembly, simply cut, twist and screw and you're done. Includes 10 feet of cable, 10 right-angle plugs and a mini cable cutter.

Planet Waves solderless cable kits are the ultimate solution for custom wiring pedal boards, rack gear, and your entire layout from guitar to amp. Say good bye to messy, unreliable wiring and say hello to custom cut cable lengths that perfectly suit your needs. Planet Waves plugs and cables provide the most accurate and reliable sound reproduction, from guitar, to amp, and all points in between. Many of Planet Waves most notable artists use the solderless cable kits as their primary pedalboard and rack wiring solution.

Planet Waves cables are the ultimate musician's cable. Utilizing exclusive In=Out Technology for pure signal reproduction, Planet Waves cables are built tough to withstand gigs and come with a limited lifetime guarantee. Planet Waves is a part of the D'Addario and Co. family of brands, the global leader in musical accessories.

• In=Out Technology: Low capacitance for pure signal transparency
• 24k gold-plated plugs provide superior signal flow and corrosion resistance
• Solderless plugs connect to cable in seconds no matter where you are, creating exact required lengths easily
• Road-tested plug connections hold up even the toughest gigging situation
• Limited lifetime guarantee

User questions & answers

Question:	What is the differences between the pedalboard kit and the instrument cable kit which is sold at a lower price and 30 more ft of cable
Answer:	If you look at the list prices you'll notice the instrument cable kit lists for more. The only difference I can see is that the instrument cable kit comes with 4 straight jacks and 6 angled. When I purchased the pedalboard kit it was less expensive than the instrument cable kit.
Question:	Just bought these. Made a couple cables and now I have serious hum. Am I doing something wrong
Answer:	A bad hum would be caused by a bad ground. As Jerry B said, you probably didn't screw one of the set screws in tightly enough. I'm sure you figured that out by now!
Question:	can I buy extra plugs
Answer:	I have bought single plugs on amazon . these things are great
Question:	Is this kit made in China
Answer:	No. The package says: "Designed, engineered and assembled in USA with foreign and domestic components."

Product features

D'Addario DIY Solderless Pedalboard Kit

The D'Addario DIY Pedalboard Kit is the ultimate solution for custom-wiring your pedal board or rack gear. Inferior patch cables can cause signal loss and undesirable coloration to your sound. The American Stage plugs and cables are specially designed to provide the most accurate and reliable reproduction of your sound from guitar to amp and all points between. The DIY kit includes 10 inches of American Stage cable, 10 right-angle plugs, a mini cable cutter, and a screwdriver.

Product description

GLS Audio 6" Pedal Board and Patch Cables are made durable and easy to use. 1/4" TS Mono Plugs and 21 AWG GLS Audio Cable are used to make these affordable awesome cables.

• Patch Cables, Pedal Boards, Instruments, use it for anything.
• Molded TS 1/4" Plugs
• 21 AWG High Quality GLS Audio Cable
• 6" long for easy fit
• Includes 3 Cables

User questions & answers

Question:	Is the 6in length of cable or length from plug to plug
Answer:	Plug to plug.

Product description

These 6" Patch cables are mar-approved for clean, pure tone. They feature oxygen-free copper conductors and spiral shields to block unwanted interference, PVC outer jackets for flexibility and protection, and flat, low-profile right-angle ends to keep your pedalboard tight and tidy. Trust MXR to patch you through.

• Flexible, durable outer jacket protects against kinks
• Flat right-angle ends keep your pedalboard tight and tidy
• 90% coverage OFC spiral shield blocks interference
• Country of Origin: China

User questions & answers

Question:	Is there a cable for digital piano 3 (red,yellow, white) end other end usb input
Answer:	I've never seen anything like that
Question:	You aren’t doing international shippings anymore??? It was sending to Mexico a few days ago, why Not now
Answer:	Shipping varies from seller to seller.
Question:	It brings 6 cables or 3 cables
Answer:	3