10 best emb guitar amplifier

Product description

Mini Guitar Amplifier Speaker with Built in 300W Amplifier

• Portable mini amplifier for your guitar
• Perfect for playing music in your bedroom or any room
• Built in 75 watts of power
• Gain, Bass, Tremble and Volume knobs
• 1/4" inputs for Aux, Input and headphones

User questions & answers

Question:	Will this amp work with an electronic drum set
Answer:	It works, before you start make sure that the volume is down and then bring it up to avoid feedback.
Question:	Can I Plug in a microphone into the speaker
Answer:	You can but it wont sound right. That is what I originally purchased this for. Better choice is to Look for a PA speaker.
Question:	What size speaker does this amp have
Answer:	I believe it is a 10 inch speaker. It's all inclosed so I never took it apart.
Question:	Does this support playing two electric guitars (or one guitar and a microphone) simultaneously? Thanks
Answer:	Since all been three inputs are 1/4", an owner should be able to plug in a second guitar into the aux input. Or, if you have a Mic with a 1/4" cable. Or a Mic with an XLR type, and get an adapter for XLR to 1/4". Don't know what a Mic would sound like through this guitar amp thou though.

Product description

PylePro Model : PTA10002-Ch. Bluetooth Pro Audio AmplifierBluetooth Professional Power Amplifier - 2-Channel Rack Mount Bridgeable Pro Audio Amp (1000 Watt) Features: 2-Channel (A/B) AmplifierBridge-able Amp: Bridge Mode AbilityBuilt-in Bluetooth Wireless Streaming 1/4'' TRS Input Connector Jacks XLR Input Connector Jacks SpeakOn Output Connectors (A/B/Bridged) Pair Speaker Terminal / Binding Post ConnectorsPower, Protect, Clip, Signal LED IndicatorsLeft and Right Channel Level Signal IndicatorsBuilt-in Ventilation Cooling FansFront Panel Control CenterRack Mountable System Bluetooth Connectivity: Simple & Hassle-Free PairingInstant Wireless Audio Streaming AbilityWorks with All of Today’s Latest Bluetooth Devices(iPhone, Android, Smartphone, iPad Tablet PC etc. )Bluetooth Network Name: ‘Pyle Speaker’ Bluetooth Version: 3. 0Wireless Range: Up to 30’+ ft. What's in the Box: Pro Audio AmplifierPower Cable Technical Specs: MAX Power Output: 1000 Watt2 x 500 Watt @ 4 Ohm2 x 250 Watt @ 8 OhmDistortion: Input Level: +4dBSignal/Noise Ratio: 102dBFrequency Response: 20Hz - 20kHz, +/-0. 2dBPower: 110/220 Volt, SwitchableDimensions (L x W x H): 19. 0'' x 11. 4'' x 3. 9'' -inchesThe Pyle Pro Audio Amplifier features high-powered 1000 watt MAX power output. Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including Smartphones, Tablets, Laptops and Computers. Hassle-free receiver pairing allow you to stream wireless audio instantly. The amp’s rack-mountable 2-channel design with bridge-ability mode make it perfect for all sound and studio applications. Additional system connectivity features include 1/4'' TRS and XLR Input Connectors, Speak-On Output Connectors (A/B/Bridged), and Speaker Terminal / Binding Post / Banana Plug Connectors. Dual ventilation cooling fans, aluminum heat sink and overload protection LED indicators keep your equipment safe and your sound secure. Enjoy reliable sound processing power with the Pyle Bluetooth 2-Ch. Bridgeable Power Amplifier.

• BLUETOOTH COMPATIBLE: Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including smartphones, tablets, laptops and computers. Hassle-free receiver pairing allow you to stream wireless audio instantly
• SAFETY CONSCIOUS POWER SWITCH: When the power amp is turned on, there is a three-second delay, which reduces/eliminates the turn-on transients associated with the system equipment connected to the amplifier and protects loudspeakers
• POWER LED: Built-in power LED indicators illuminate when the AC main power is being supplied to the amp and both channels are operational
• SHOCKPROOF BINDING POSTS: Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires
• AUTOMATIC COOLING FANS: Two 2-speed DC fans supply cool air to the amplifier. The fans switch to high speed automatically when the unit requires additional cooling

User questions & answers

Question:	How do I hook up a microphone to the amplifier
Answer:	Use a pre-amp or review your blue-tooth device (tablet) to provide the signal to this amp.
Question:	Will these work with my numark nvii
Answer:	depends on what kind of speaker you have and how many if we are talking about power, now if we are talking about connections so it works
Question:	Could I use this for my KRK ROKIT 8 G3 for my computer
Answer:	As long as your impedance is 8 ohms, it should work.
Question:	can this amp run the ButtKicker Mini Frequency Response - 10Hz - 250Hz, 50 Watt Minimum, 250 Watt Maximum, Impediance - 4 Ohms
Answer:	I don't know about the minimum wattage but I know it maxes out at 250 watts (RMS value) when using the BRIDGE connection which has an output impedance of 4 ohms. Obviously you just need to make sure your main power/volume knob is turned up enough to get your 50 watt minimum. If you run the single channels they have an output impedance of 8 ohms.

Product description

Our Frontman amps deliver quality tone at a great price, with custom-voiced built-in overdrive for great tone and the unmistakable Fender Blackface look. The 10-watt Frontman 10G features a 6-inch Special Design speaker and a selectable gain control that can rock guitar tones from tube-emulated overdrive to full-strength ultra-saturated distortion; perfect for blues, metal and the famous Fender clean tone. Closed-back design gives a heavier bass response; the 1/8-inch input lets you play along with your media player of choice; and the 1/8-inch headphone output is great for silent practicing.

• 10 Watts
• 1-6" Fender Special Design Speaker
• One Channel
• Controls: Gain, Over-Drive Select Switch, Volume, Treble, Bass
• Other Features: 1/4" Instrument Input, 2-Band EQ, 1/8" Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8" Headphone Output Jack for Silent Practice, Closed-Back Design for Heavier Bass Response

User questions & answers

Question:	What kind of power supply does this use? Can I plug into the wall or does it take batteries? I'm not very familiar with amplifiers, thanks
Answer:	Documentation does not say, not on the box either. Coverage area indicates it is 2.4. Works very well I wouldn't worry about it. Good luck.
Question:	Would this be good for Karaoke (I have a Karaoke Mixer) or for connecting to a Projector to boost the sound
Answer:	It depends on the dealer's policy.
Question:	Does it come with a wire
Answer:	Just received the DWS-3 system today on recommendations from numerous reviews and forums. Plugged it in using my Warwick Thumb 5-string and GK mb500. No discernible difference from using a standard cable. Handled the low B string just fine. I’m confident it will do fine at gig this weekend with GK+SWR Goliath III cab.
Question:	Can this amp used for violin? Does it has speakers
Answer:	As it is I found that mine did also , after research for a few minutes I found that it was my input jack on the guitar . Don’t know if this helps but I cleaned mine with a burst of compressed air and it helped but ultimately I changed the jack out for a new one and I now have crisp and clear sound .

Product features

Intuitive Easy To Use Controls

For the beginner electric guitarist who wants a straight forward and easy-to-use practice amplifier, the Frontman 10G provides explosive tone with intuitive controls.

The Gain controls how hard you are driving the amp with your guitar.

The Volume controls how loud your amplifier is.

The Treble and Bass controls help you shape the high and low frequencies of your guitar tone.

For thick overdriven distortion at the push of a button, the Frontman 10G features a convenient front-panel clean/overdrive switch.

Headphone Out & Aux In

The 1/8" headphone out jack allows you to practice at any hour without disturbing the rest of your household.

Practice along to your favorite tunes via with the 1/8" Aux In jack.

Classic Fender Vibe

The Frontman 10G provides classic Fender tone in a small package. Silver grille cloth, skirted amp knobs, and Fender amplifier logo provide the Frontman 10G with all the classic aesthetics of vintage "Blackface" amps.

Product description

The BT connectivity offers plenty of versatility when it comes to connecting your speaker system to an audio source but, there?s more! The Street Vibe offers Micro SD card and Flash USB connectivity. Simply load your card or flash drive and connect to your unit to get started.

Technical Details:

Built-in Bluetooth for Wireless Audio Streaming

Works with All of Your Favorite Bluetooth Devices

(iPhones, Androids, Smartphones, iPads, Tablets, PC, etc.)

Instant Karaoke: Includes Microphone & 1/4" Mic Input

USB Flash Drive & SD Memory Card Readers

AUX (3.5mm) Input for Connecting External Devices

Built-in Rechargeable Battery (3 Hour Battery Life)

FM Radio with LCD Digital Display Screen

6.5" Woofer and 1" Tweeter System

300 Watt Peak Power - 150 Watt RMS @ 4 Ohm

Volume, Mic Volume, Tone Controls

Frequency Response: 20-20kHz

Bluetooth Operation Range: 65 Feet

Convenient Carry Handle

110V/220V Switchable

Accessories Included: Remote Control, Wired Handheld Microphone, 10' ft Microphone Cable, RCA to 3.5mm & Power Adapter Cables Unit Dimensions: 12.5"H x 8.5"W x 4"D

Package Contents:

1 * G-AmpV2

1 * Wireless Microphone

1 * Power Adapter included

1 * Remote Control

1 * User Manual

• FM Radio with LCD Digital Display Screen / 6.5" Woofer
• Works with All of Your Favorite Bluetooth Devices
• Instant Karaoke: Includes Microphone & 1/4" Mic Input
• USB Flash Drive & SD Memory Card Readers
• Built-in Rechargeable Battery (3 Hour Battery Life)

Product description

You can't be without a perfect guitar amplifier if you want to enjoy your musical time. Our guitar amplifier will satisfy your desire with its wonderful sound effect. Equipped with a soft plastic handle, this guitar amplifier is easy to carry and portable. Plastic protection and rubber foot pads on its corners will prevent it from clash and scraping. The peak power of this guitar amplifier is 300 watts while there are VOLUME, TREBLE and BASS Controls to adjust the sound volume and effect. And little switching noise will be produced when you start it.For beginning electric guitarists—or experienced players who want something inexpensive and portable—we think the EMB GA8 is the ideal amplifier. We researched 24 models, then put the 10 most popular to the test for 20 hours with two professional instructors, a guitar student, and our musical instrument testing team. With a colossal variety of sounds, plus built-in effects and intuitive controls, the EMB GA 8 Series was a nearly unanimous top pick.This unit is small and simple to operate. It doesn’t offer the variety of sounds our main picks do, but the sound it does create is great. This is a pretty loud amplifier, and it’s a solid option for those looking for something that sounds great with minimal knob turning.

This 3RD GEN Come with equip unique sound that only from EMB.

Technical Details:

1. Peak Power: 300 Watts

2. RMS Power: 15 Watts (RMS)

3. Speaker: 8 Inches @ 8 Ohm

4. Dimensions: 12.5 x 12.5 x 7.7 inches (L, W, D)

5. AC Power: 110V

6. Weight: 12.5 Lbs

Package Contents:

1 * GA8 Speaker

1 * 3RD Gen SoundAmp Built in

1 * User Manual

• 3RD GEN Come with equip unique sound
• Peak Power: 300 Watts / RMS Power: 15 Watts
• Speaker: 8 Inches @ 8 Ohm
• Dimensions: 12.5 x 12.5 x 7.7 inches (L, W, D)
• AC Power: 110V / Weight: 12.5 Lbs

Product description

Fender, a leader in instrument manufacturing, started designing, manufacturing and evolving musical instruments in 1946. Since, Fender amplifiers have and continue to be an integral part of modern music. Compact, easy to use and versatile enough for any style of guitar playing, the 20-watt Champion 20 is an ideal choice for your first practice amp. Straightforward controls, cool effects and versatile amp voicing’s make it easy to dial in just the right sounds for rock, blues, metal, country, jazz and more. Fender’s 5 Year Transferable Warranty included with purchase.

• Shape your sound with the EQ section (Bass + Treble) as well as dial in lush effects such as digital reverbs, chorus, vibratone and delay.
• Jam along with your favorite tracks by simply plugging your MP3 player into the Auxiliary input and you instantly become part of the band and /or practice privately with the 1/8th headphone output jack that also mutes the speaker output.
• With a turn of a knob, choose from clean to mean tones from the 17 various amp models that will to accommodate almost any genre of music.
• Store extra cables or other small accessories with the open back cabinet. Voltage: 230 Volts EUR
• Enjoy the peace of mind that this amp is backed by Fender’s 5 Year Transferable Warranty.
• Classic Blackface styling adds that inimitable Fender touch. Inputs- One - 1/4 inch. Total Impedance- 8 ohms

User questions & answers

Question:	This is a 40 watt amp? For 179... does it have built in distortion and reverb and delay? Thanks
Answer:	No tubes, this is a solid state amp. But I must say it sounds very authentic to the legendary Vox amps from the sixties, either played clean or overdrive. I rate this amp five stars.
Question:	What function does the tap button perform? Thanks
Answer:	I have an Epiphone es339 and I am pretty happy with it. It's really not a bad little amp. A casino should sound good through it.
Question:	what size is speaker
Answer:	It is only 10w. I find it more frustrating that between the gain channel and clean, there's a large volume setting difference. I have to turn up the volume a lot when I switch between them to clean.
Question:	is the power cord
Answer:	Very little to none...Only time I have noticed any was when i had it powered through a AC plug in my SUV. In home use i have noticed none. It is a great little amp.

Product features

Features

• 20 watts
• 8” Fender Special Design speaker
• Single channel and input
• Reverb, delay/echo, chorus, tremolo, Vibratone and other effects
• Different amp voicings and distortion types
• 1/8” auxiliary input and headphone output jacks

Onboard Effects

In addition to their fantastic uncolored sound, many Fender amps come equipped with onboard effects that convey a versatile wealth of tonal coloring, atmospherics and textures. Includes reverb, delay, chorus, tremolo and much more.

AMP Modeling

This amplifier features digital amplifier modeling encompassing a variety of amp types old and new, U.S. and U.K., and more. From classic Fender amp sounds to modern designs voiced for specific styles (i.e., metal), it’s just like having several amps in one.

Headphone Jack

For convenient personal listening at any time that won’t bring the house down on anyone else within earshot, this amp features a headphone output jack.

Product description

2000W 2x12" PA Rechargeable Trolley Speaker System

• 2x 12" PA speaker sytem | Max power: 2000W | Sensitivity: 97dB | 7 Hours Battery
• Frequency Range: 40Hz-20kHz | Built-in Bluetooth - USB/MP3 Player - VHF Microphone
• Treble and Bass Control | Mic. Echo & Volume Control | Music Volume Control
• Microphone Line Input
• Built-in Rechargeable Battery | Installed Handle and Wheels for Easy Carry | Power Source: AC 120V / 240 V

User questions & answers

Question:	is wireless microphone sound stereo
Answer:	Don't know I only use it for the power of the 2000watt speaker, its loud in case your wondering it goes up to 32 on volume nob I've only went up to 22 and its loud my neighbors can hear it clear as day when I have it on.
Question:	Does the led lights only display the mostly pink color? can it be set to only blue lights
Answer:	The lights rotate at random, you can't set the lights to just one color
Question:	Can both microphone use at the same time
Answer:	yes both microphone can be used . at the same time
Question:	who can tell me if two of these can be hooked together for stereo playback
Answer:	I only own 1 of these speakers so I don't have an answer for your question

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

From the company that invented the electric bass amp, the Fender Rumble Series is a mighty leap forward in the evolution of portable bass amps. With its beefier power amp and larger, ported speaker enclosure, the Rumble 25 pumps volume and deep bass response. In addition to standard volume and EQ controls, the Rumble 25 adds a newly-developed overdrive circuit and switchable Contour control, delivering gritty bite and slap-worthy punch at the mere push of a button.

• Expore bass tones from classic gritty growl to slap-worthy modern punch with the newly-developed overdrive circuit and switchable contour controls
• A beefy 25 watt power amp and ported speaker enclosure pumps volume and deep bass response.
• Practice privately with the 1/4" headphone output jack that also mutes the speaker output.
• Jam along with your favorite tracks by simply plugging a MP3 player into the 1/8" Auxiliary input jack and instantly become part of the band.
• Enjoy the peace of mind that this amp is backed by Fender's 5 Year Transferable Warranty.

User questions & answers

Question:	Is it worth the extra $300 to get the Rumble 500 head and the 410 and 115 cab, rather than the combo + the 115 extension
Answer:	I have the 210 combo and 115 extension. The 115 comes with wheels and I put the 210 on a rock and roller cart. Extremely portable and very loud, it will get louder than your ears can stand. I would say the combo and 115 are plenty. Not worth getting the head and 410, just a waste of money and more weight to carry around.
Question:	As a stand alone unit, are the 210's pushing 500 watts, or do you need to attach another cabinet at lower ohms to get your 500 watts
Answer:	As a standalone unit the two 10 inch speakers are pushing 350 Watts at 8 ohms (Internal). You need to attach an external 8 ohm speaker cabinet to get 500 Watts. Attaching the external 8 ohm speaker cabinet brings the total impedance down to 4 ohms and that is when you get the maximum 500 Watts.
Question:	I'm helping a friend pick out a bass & amp for her son. Would this amp be loud enough for a small entry-level garage band
Answer:	I remember way back when I was in my first band. I had an ampeg B-15 and it was woefully underpowered. All I got out of it was a ton of distortion. It can be very frustrating for a new player to have to deal with poor sound. I’ve known guys who have given up playing because of the frustration of dealing with noise instead of music. I would use a 25w amp for practicing by myself but for a garage band I would go with a minimum of 100w.
Question:	is this amp usable in new zealand
Answer:	I turned mine upside down and it still worked so I suppose it will be OK down there. (On mine, input power is marked 100-120V @ 50-60 HZ, 70W.)

Product features

Ready to Rumble

Small but loud, the Fender Rumble 25 is built with great features including classic Fender styling, 8" speaker, overdrive circuit, mid-scoop contour switch and more. A great practice, at-home and coffeehouse-gig combo for any bassist.

OVERDRIVE SWITCH

At the mere flick of a switch, your Rumble bass amp gives you gritty, aggressive, incredibly rich and satisfying overdriven tone.

AUXILIARY INPUT

For easy connectivity with digital media players and other similar devices, this Rumble combo is equipped with an 1/8" stereo auxiliary input.

HEADPHONE OUTPUT

For convenient personal listening at any time that won’t bring the house down on anyone else within earshot, this amp features a headphone output jack. (headphones not included)

Product description

Everything you need in one device At Sweetwater, we want to make sure that your gig sounds the way you want it to. That’s why we’re excited to tell you more about what the Mackie ProFX10v3 can really do. Each channel starts with Mackie’s Onyx preamp. Then you can use the 100Hz low cut control to keep your sound clean. Next, you can dial up to 60dB of gain before sending it through onboard compression and 3-band EQ. Every channel is equipped with FX level controls and a mute button. What’s more, every mic input is equipped with 48-volt phantom power. Improved digital effects To make sure that you sound perfect, the Mackie ProFX10v3 has an onboard effects processor. The effects processor has a blend function, FX level control, and a quick mute switch. The GigFX effects engine offers up 24 different effects ranging from delays, reverbs, choruses, distortion, and even an auto-wah feature. All of these effects are accessed by a simple twist of the Presets knob. Exceptional build quality Mackie mixers have been a mainstay for studio and live sound for many reasons. Chief among the reasons is durability and build quality. You’ll find these mixers in venues across the country covered in years of dust and grime. But when you power them up, they deliver top-notch sound and reliability. If you’ve never owned a Mackie before, you’ll be surprised by its sturdy construction. Seriously, your Mackie Mixer will stand up to whatever punishment you give it without batting an eye.

• Mackie ProFX10V3 Mixer + Tascam TH02 + EMB XLR Cable + Gravity Phone Holder Bundle
• GigFX effects engine delivers 24 effects including reverbs, delays, and choruses
• 4 Mackie Onyx mic preamps deliver clear signal and 60dB of gain
• 3 Band EQ and 100Hz low-cut filter on all channels
• 48-volt phantom power on all mic channels

User questions & answers

Question:	Does this bundle include the avid protools first software and plugins
Answer:	I believe it does. I use garage band so wasn't interested. I also ended up sending it back as I want a way to export each channel separately. This device doesn't do that,
Question:	What length XLR cables do you ship with this bundle
Answer:	3ft