Product description

Features:



- 8 Channel professional powered mixer with USB slot

- Ultra-low noise discrete Mic preamps with +48V phantom power

- Balanced inputs for highest signal integrity

- Ultra-musical 2-band EQ on all channels

- Peak LEDs all mono channels

- 1 Aux send per channel for external effects and monitoring

- Simulate effect(16DSP)

- Master mix output and rec output

- Highly accurate 5 segment bargraph meters

- Separate master Mix outputs



Specification:



- Weight: 14.96lbs

- Power supply: 110V

- Dimensions(WxHxD): 12.8"x16"x 4.7"



Package Content:



- 1x Professional powered mixer

- 1x Power cord

- 1x Manual



Notice:

1. It is suggested to use the external sound box within 12". When using the 12" or 10" sound box, up to 4 can be used at a time.

2. The power of the external sound box should be within 250W.

3. We suggest to use it in family party, small stage performances.

• Professional 8 Channel Powered Mixer with USB slot ; Dimensions(WxHxD): 12.8"x16"x 4.7"; Weight: 14.96lbs; Power supply: 110V
• Ultra-low noise discrete Mic preamps with +48V phantom power; Balanced inputs for highest signal integrity
• Ultra-musical 2-band EQ on all channels; Peak LEDs all mono channels; Master mix output and rec output; Separate master Mix outputs
• It is suggested to use the external sound box within 12". When using the 12" or 10" sound box, up to 4 can be used at a time
• The power of the external sound box should be within 330W; We suggest to use it in family party, small stage performances

User questions & answers

Question:	Does it read SD cards
Answer:	Grind house PA 1450 Watts ( dual 15” woofers) work very well, with the addition of a 10key graphic equalizer I use them on private parties.
Question:	is this mixer boosted or not? It must be connected to boosted speakers for small live events
Answer:	good
Question:	I would be very grateful if someone advise me about the pa speakers how much watts are recommended to be connected to this mixer
Answer:	You could, but this is an audio pedal, so it will change the sound beyond just the octave. It is a good sounding pedal, but I've only used it on guitar and bass and it works great there. I'm not sure if it will take the higher output from a keyboard without distorting since it is made for lower output instruments.
Question:	Will the usb slot handle an iPod
Answer:	I got it for the same reason. Yes it would but it is not quite the same as having another player present. The tone on the doubled lead is different but in a pinch it would work. I use it for that and for faux 12 string effects.

Product description

Features:



- 2-Layer Storage - 22 15/16"x20 15/16" large upper platform with side mounting holes for mounting crossbars customizably to fit mixers in different sizes; Bottom rackmount with 2 metal crossbars & vertical side holes that used for mounting baffles to hold the amplifier, equalizer or power conditioner stably

- Easy Mobility - Equipped with 4 rolling casters for moving around to different positions as needed effortlessly; 2 of them feature a lockable option for firmly holding the stand in place for safe movement

- 45° Adjustable Platform - The angle of the upper platform can be adjusted by side knobs to an entirely flat or slanted surface for easier visibility and access as needed

- Sturdy Construction - Features overall metal construction for durable use and long lifespan, as well as providing a strong support for your expensive equipment with max load capacity of 220.46Lbs for bottom rackmount & 110.23Lbs for upper platform

- Wide Application - Applied as a universal electronic device rack stand for using with any sound equipment and perfectly used for clubs, public amenities, outdoor shows, studio, stage, etc.



Specifications:



- Overall Unfolded Dimension (LxWxH): 22 15/16" x 20 15/16" x 44 5/16" (58.2 x 53.2 x 112.5 cm)

- Upper Platform Dimension (LxW): 22 15/16" x 20 15/16" (58.2 x 53.2 cm)

- Bottom Rackmount Dimension (LxW): 20 14/16" x 19 11/16" (53 x 50 cm)

- Height Range: 36 10/16" to 44 5/16" (93 to 112.5 cm)

- Upper Platform Load Capacity: Max. 110.23 Lbs (50 kg)

- Bottom Rackmount Load Capacity: Max. 220.46 Lbs (100 kg)

- Net Weight: 17.64 Lbs (8 kg)



Package Contents:



- 4x Bottom Installation Pipes

- 4x Casters

- 2x Left and Right Support Pipes

- 2x Middle Horizontal Pipes

- 2x Upper Left and Right Support Pipes

- 2x Upper Support Crossbars

- 2x Bottom Metal Plasters

- 1x Upper Branch

- 2x Set of Fixed Screws

- 1x Manual

• [2-Layer Storage]: 22 15/16"x20 15/16" large upper platform with side mounting holes for customizably placing crossbars to fit mixers in different sizes; Bottom rackmount with 2 metal crossbars & vertical side holes that used for mounting baffles to hold the amplifier, equalizer or power conditioner stably
• [Easy Mobility]: Equipped with 4 rolling casters for moving around to different positions as needed effortlessly; 2 of them feature a lockable option for firmly holding the stand in place for safe movement
• [45° Adjustable Platform]: The angle of the upper platform can be adjusted by side knobs to an entirely flat or slanted surface for easier visibility and access as needed
• [Sturdy Construction]: Features overall metal construction for durable use and long lifespan, as well as providing a strong support for your expensive equipment with max load capacity of 220.46 Lbs for bottom rackmount & 110.23 Lbs for upper platform
• [Wide Application]: Applied as a universal electronic device rack stand for using with any sound equipment and perfectly used for clubs, public amenities, outdoor shows, studio, stage, etc.; Overall Dimension (LxWxH): 22 15/16" x 20 15/16" x 44 5/16" (58.2 x 53.2 x 112.5 cm)

User questions & answers

Question:	Hi where can i get more of the hardware pieces for more rack gear? there is only 6 sets of 4. so only enough for 4 units. thanks
Answer:	Just search for standard IT/server SQUARE rack screws AND mounts. They come in various quantities with the screws, mounts, and plastic washers needed. (I.e., Do not forget to get the small metal mounts in addition to rack screws and make sure those mounts are square, not circular.) You can find many right here on Amazon.
Question:	Can I remove the two metal braces on top of the rack? I would like to mount a piece of plywood on top to store things
Answer:	Yes you can move the braces but make sure it is stable afterwards. I bought erector set metal and reinforced it.
Question:	will my behringer x1622usb mixer with ear mount brackets fit the top adjustable portion? with both ear mount brackets, it measures 19" inches wide
Answer:	If your ear bracket holes measure 19" from left to right they should. I would go a few rack units higher up the unit depending on depth of components you install and the angel you desire. Good luck!
Question:	What size are the bolt studs on the wheels
Answer:	calipers say the hex nut used to tighten the studs are 9/16 in (14.37 mm)

Product description

Pyle Model : PMXU83BT

8Ch Bluetooth Pro Audio DJ Sound Mixer

8Ch. Bluetooth Studio Mixer DJ Controller Audio Mixing Console System

Features:

• DJ & Studio Console Mixer System
• Multi 8Channel Audio Source Mixing
• Builtin Bluetooth Wireless Receiver
• FX (Analog Effects) & 16 Bit DSP processor
• DirecttoComputer Connect & Sound Record Ability
• LCD Digital Display & Front Panel Control Center
• Rotary Adjustment Knobs & LED Indicator Lights
• MP3 Digital Audio File Compatibility
• USB Interface: MP3 Flash Drive Reader/Computer Connection
• Connect & Stream Audio from External Devices
• 1/4’’ (L/R) MAIN Outputs
• XLR/14’’ Combo Audio LINE/Microphone Inputs
• Pair RCA (L/R) Inputs
• Pair 1/4’’ Mono + Stereo Inputs
• 1/4’’ Send + Return Inputs
• 1/4’’ Headphone Jack
• Stereo Level Fader/Slider
• Output Signal Level Indication
• BUS Audio Control, Sound Routing
• PAD Channel Source Input Switch
• Independent Channel Input Audio Configuration
• Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment
• +48V Phantom Power Control
• Power ON/OFF Switch
• Used for Professional Studio Applications & OnStage Performances

What’s in the Box:

• Bluetooth Studio Mixer
• Power Adapter Cable, 4Pin

Wireless Bluetooth Connectivity:

• HassleFree Audio Streaming Ability
• Works with All of Today’s Latest Devices
• (Smartphones, Tablets, Laptops, Computers, etc.)
• Bluetooth Network Name: ‘KT08UP’
• Bluetooth Version: 4.0
• Wireless Range: 15’+ ft.

Technical Specs:

• Input Mixer Channels: 8Ch. (+ FX/Headphones)
• Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm
• Input Frequency Response: 20Hz20kHz, +/3dB
• Input Distortion: 0.03%, 1kHz/150mV Input
• Channel GAIN Adjustment: +20/+64 (6/+38)
• HIGH Gain: +/15 dB, 12kHz Frequency Shelving
• MID Gain: +/15 dB, 2.5kHz Frequency Shelving
• LOW Gain: +/15 dB, 80kHz Frequency Shelving
• HIGH/MID/LOW Adjustment: 15/+15dB
• Stereo Output Level Meter: 5Segment (+6, +3, 0, 3, 10dB)
• PAD Input Channel Adjustment: 26dB
• Peak CLIP Level: < 3dB
• Phantom Power Voltage: +48V
• Power Supply: 100/240V (+/15V DC Power Adapter)
• Digital Audio File Compatibility FileTypes: MP3, WAV
• Dimensions (L x W x H): 9.3’’ x 10.8’’ x 2.6’’

 

The Pyle 8Ch. Bluetooth Studio Mixer DJ Controller Audio Mixing Console System DJ & Studio Console Mixer System Multi 8Channel Audio Source Mixing Builtin Bluetooth Wireless Receiver FX (Analog Effects) & 16 Bit DSP processor DirecttoComputer Connect & Sound Record Ability LCD Digital Display & Front Panel Control Center Rotary Adjustment Knobs & LED Indicator Lights MP3 Digital Audio File Compatibility USB Interface: MP3 Flash Drive Reader/Computer Connection Connect & Stream Audio from External Devices 1/4’’ (L/R) MAIN Outputs XLR/14’’ Combo Audio LINE/Microphone Inputs Pair RCA (L/R) Inputs Pair 1/4’’ Mono + Stereo Inputs 1/4’’ Send + Return Inputs.

• USB/Flash Reader /MP3 Compatibility : Connect your external USB, computer PC, flash drive or Bluetooth device to Mix & record; Use the built in controls to play/pause, skip tracks and switch between modes
• Bluetooth Wireless Music Streaming : Hassle and cable free audio streaming ability directly to the console unit; Mix your iPad, iPhone, Android smart phone to your DJ session; This audio mixer makes it a breeze to wirelessly stream all uour favorite music tunes to the mixing board easily from Pandora or Spotify
• MIC + Sterero Line Inputs : Supporting XLR and unbalanced 1/4" plug with +48V phantom button, highly accurate LED peak level indicator and ultra musical 3 band EQ on all channels; Ultra low noise, high headroom mixer with super easy functionality for professional vocal and instrumental sound
• Rugged Steel Chassis: With sealed rotary controls to resist dust and grime, this compact DJ mixer will provide total dynamic control for the ultimate in punch and clarity; This incredibly versatile mixer is great for high quality on stage performance, live gigs, and Karaoke; Effortlessly achieve premium quality crystal clear studio level quality musical playback
• New Multi Voltage Power Supply : 100V 240V (+/ 15V DC Power adapter) ideal for worldwide usage; Enjoy a value packed mixing solution today with performances that sound great each time

Product features

Professional Audio Mixer

With sealed rotary controls to resist dust and grime, this compact DJ mixer will provide total dynamic control for the ultimate in punch and clarity; This incredibly versatile mixer is great for high quality on stage performance, live gigs, and Karaoke; Effortlessly achieve premium quality crystal clear studio level quality musical playback

USB/Flash Reader /MP3 Compatibility

Connect your external USB, computer PC, flash drive or Bluetooth device to Mix & record; Use the built in controls to play/pause, skip tracks and switch between modes

Bluetooth Wireless Music Streaming

Hassle and cable free audio streaming ability directly to the console unit; Mix your iPad, iphone, Android smart phone to your DJ session; This audio mixer makes it a breeze to wirelessly stream all uour favorite music tunes to the mixing board easily from Pandora or Spotify

Mic and Stereo Line Inputs

Supporting XLR and unbalanced 1/4" Plug with +48V Phantom button, highly accurate LED Peak Level Indicator and Ultra-musical 3-band EQ on all channels Ultra-low noise, high headroom mixer with super easy functionality

8 Channels High Headroom Mixer

Supporting XLR and unbalanced 1/4" plug with +48V phantom button, highly accurate LED peak level indicator and ultra musical 3 band EQ on all channels; Ultra low noise, high headroom mixer with super easy functionality for professional vocal and instrumental sound

Product Dimension

The Pyle Professional Audio Mixer has Dimensions (L x W x H): 9.3’’ x 10.8’’ x 2.6’’ with 5.2 lbs of weight, So you can easily carry everywhere you go.

Built-in Digital Effects

For musical and non-musical applications, effects processing adds polish and professionalism to the mix. The Professional Audio Mixer Sound Board Console Desk System digital multi-effect processor, offering a comprehensive suite of editable digital effects perfect for enhancing your mix, whether adding depth to a speaking engagement or breathing new color and atmosphere into a live performance.

• [Easy Movement]: The DJ mixer stand is equipped with 4 swivel wheels which is easy to move around effortlessly, 2 of them are lockable to avoid the stand moving out of control; can be used as an equipment rack in studio, or as a movable mixer stand for stage
• [45° Adjustable Platform]: Twist the side knobs to adjust the angle of the top rack to get flat or slanted surface for easy visibility & access as needed
• [2-Layer Storage]: Top frame with supporting crossbars for placing mixers of different size; bottom rack with crossbars for storing equipment like amplifier, equalizer, wireless microphone more stably
• [Durable Construction]: Made of sturdy metal material, provides a strong support for your equipment; max load capacity is 220.46 Lbs
• [Wide Application]: Aside from being a DJ stand, it is also a universal equipment or electronic device rack stand that can be used with amplifiers, processors, keyboard or any sound equipment, perfect for home, office, studio or stage; Top Frame Dimension: 22 15/16" x 20 15/16" (58.2 x 53.2 cm)

User questions & answers

Question:	Can it hold a 33inch wide equipment
Answer:	You will have to purchase the screws and the nut set in a square holder.
Question:	Will this work as a stand for the Maschine MK
Answer:	standard square 19" rack mounts
Question:	I noticed the “holes” are square. How do you screw in rack mounts into the lower portion? I’d use the top for my mixer and the bottom for my effects
Answer:	It does have a slot for that.
Question:	What is the diameter and pitch of the rack mounting hardware that comes with it
Answer:	Is a powered mixer to connect to passive speakers. I purchased and it was broken. Received a full refund but did not try a second time. Cheaply made but it is also inexpensive. You get what you pay for.

Product features

45-Degree Adjustable Platform

• The knobs on each side of the top platform, allow to adjust the angle of the top rack mountable to an entirely flat, level surface or to a slanted angle for easier visibility.

Widthly & Additional Protection Platform

• The top platform rackmount supplies 23'' x 21" mounts to fit your equipment, and included 2 bar to help you hold your expensive equipment safely in place.

4 Casters Rolling Audio Rack

• This rack mount rolling stand include 4 heavy duty casters, 2 of them feature a lockable option to hold the stand in place.

Product description

The simplest model in the range, the third-generation Scarlett Solo provides singer-songwriters with a reassuringly easy recording process. Equipped with high performance 24-bit/192kHz AD-DA converters, Scarlett S the same professional sound quality throughout the third-generation range. Its features include a single upgraded third-generation Scarlett mic preamp: with a switchable air setting to reproduce the air effect of Focusrite's original ISA mic preamp, giving your vocal recordings a brighter and more Open sound. The high impedance, high-headroom instrument input allows you to record guitar or bass without any clipping or unwanted distortion, while gain Halo metering makes it easy for you to set the input level. And Scarlett Solo's balanced outputs are hum-free when connecting studio monitors with balanced inputs, so you’ll always have pristine audio playback. Scarlett Solo is designed to stand up to days on the road and connects straight to your Mac or PC via USB cable, with no external power required. It comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and pro Tools first Focusrite creative pack. Intuitive enough for beginners yet advanced enough to inspire real creativity with great-sounding effects. Focusrite has partnered with Splice to give 3rd Gen. Interface owners a free month Splice sounds subscription when setting a new Splice account. Splice sounds offers millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily from your favorite producers, sound designers, and artists. Creators use Splice to make all kinds of music, including chart-topping pop, Grammy-winning albums, underground mixtapes, and cinematic scores. As with all Focusrite products, you’ll also benefit from a two-year, award-winning customer support, and membership of their plug-in Collective offering free software downloads and generous discounts. Interested in what headphones are compatible with Scarlett? Search 'Headphones' on the Focusrite help centre for more information.

• One of the best performing mic preamps the Scarlett range has ever seen, now with switchable air Mode to give your recordings a brighter and more open sound. One high-headroom instrument input to plug in your guitar or bass. Two hum-free balanced outputs provide clean audio playback.
• High-performance converters enable you to record and mix at up to 24-bit/ 192kHz.
• Quick start tool to get up and running easier than ever.
• Includes Pro Tools | First Focusrite Creative Pack, Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 3-month Splice subscription, and your choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration
• LIMITED TIME OFFER: FREE Klevgrand DAW Cassette upon registration and download.

User questions & answers

Question:	Is the headphone jack on this for monitoring your inputs, or does your PC audio come through it aswell
Answer:	Hi, You can monitor your inputs and listen to playback from your computer simultaneously, which allows you to create overdubs with next to zero latency. You can either choose to monitor the inputs using the Direct Monitor switch, or you can use the Input Monitor feature in your DAW. If using the Direct Monitor feature the input signal will be passed directly to the line and headphone outputs, whereas if you use the Input Monitor feature in your DAW, you will be hearing the audio you're recording back from your DAW. In either case, you can still hear any other audio playing back from your DAW at the same time as recording. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	What type of usb cable does this come with? is it a type-c to type-c or a type-c to type-a
Answer:	Hi, This comes with a type-c to type-a cable. If you have type-c ports, you will need to purchase a type-c to type-c USB cable separately. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	Does the XLR input only record audio to the left side
Answer:	Hi, When recording a single microphone, you should ensure that you create a mono audio track in your DAW instead of a stereo audio track. When you record onto a mono audio track, the output from that track will be heard on both sides of your headphones or speakers (ensuring the output is set to stereo), however, if you record onto a stereo track, the audio will just be recorded onto the left side of a stereo file and you will ony hear it on the left of your headphones/speakers. This is explained in more detail here: https://support.focusrite.com/hc/en-gb/articles/206849779?flash_digest=62885ef974b4eb116f3b3ea2c9b9c38ddb871473 Best regards, Laurence Clarke // Focusrite Technical Support
Question:	can this power 250 ohm headphones
Answer:	I have a 650 , 300 ohm and it's enough to play it at okay volume but not enough to power it completed I'm looking at an Amp to pair this with

Product features

The perfect audio interface for a singer-songwriter

You’ve found the simplest USB audio interface we make. If you want to start creating studio quality recordings with your guitar, the 3rd Generation Scarlett Solo provides an easy way in.

Product description

Professional 4 Channel Powered Mixer with USB slot



4 Mono Input Channels with gold plated XLRs and balanced Line Inputs

Ultra-low noise discrete Mic Preamps with+48V Phantom Power

Ultra-musical 2-band EQ on all channels

1 Aux Send per channel for external effects and monitoring



PACKAGE INCLUDE:

1 x Professional Powered Mixer

1 x Power Cord

1 x Manual



Tips: Don't turn to the max on each channel, it will damage the product.

The rotational speed of cooler fan is constant,the sound will have a little big.

This product can't be used for Apple system.

• 180watt RMS, 340watt Max,Volt: 110V / 60Hz,Dimensions ( W x H x D ): 11.8"x 12.6" x 4.3"
• Professional powered mixer with USB Slot; 2 Speaker output socket; 4 Mono Input Channels with gold plated XLRs and balanced Line Inputs
• Ultra-low noise discrete Mic Preamps with+48V Phantom Power, Balanced Inputs for highest signal integrity
• Ultra-musical 2-band EQ on all channels,Peak LEDs all Mono Channels,1 Aux Send per channel for external effects and monitoring, Simulate effect (16DSP)
• Master Mix Output and rec output, Highly accurate 5 segment Bargraph Meters, Separate Master Mix Outputs

User questions & answers

Question:	Can you record with the USB feature
Answer:	Connect by using a USB cable. Running from the mixer to the computer or laptop.
Question:	Can this mixer work as an amplifier and power two unpowered speakers
Answer:	Please switch the machine to Bluetooth mode. ( Press the "menu“ ” button)
Question:	How do you connect a powered speaker/moniter
Answer:	I have a tascam 2488 (22”-14”) recorder on the slanted top area of mine. I secured it and it’s very stable. Something 33” wide-a midi keyboard for example- would be fine as long as you secured it very carefully and the weight was reasonable.
Question:	how you connect Bluetooth
Answer:	The Machine MK3 itself is not designed as a rack mount unit. However the rolling rack comes with 2 adjustable rails for the top section. The rails CAN be adjusted to accommodate the Machine MK3 between them: you place the unit on top of the rails. The Machine MK3 is NOT attached to the rack.

Product description

Features:



- 8 channels mono inputs for microphone

- Built-in 16 DSP effect processor

- 48v phantom power for condenser microphone

- LCD can display lyrics

- Recording function - connects computer with USB cable

- With USB Slot for playing MP3/WMA music directly

- 2-band equalizer on each channel and 5-band graphic equalizer on the main

- Low noise pre-amp on each channel with volume, pan, effect, 2-band equalizer and gain

- Balanced Inputs for highest signal integrity

- Master mix output and REC output

- Headphone output jack

- Ideal to use in family party, small stage performances etc.



Specifications:



- Overall Dimension(LxWxH): 16 1/2" x 13" x 5 3/8" (42 x 33.5 x 13.5cm)

- Power Cord Length: 3.9ft (1.2m)

- Voltage: 110/220V

- Output Power: 330Wx2, 4Ω

- S/N Ratio:>105dB

- THD: <0.01%

- Frequency Response: 20Hz to 18KHz

- Net Weight: 15.6lbs (7.1kg)



Package Contents:



- 1x Powered Mixer

- 1x Power Cord

- 1x Manual



Notices:



- It is suggested to use the external sound box within 12". When using the 12" or 10" sound box, up to 4 can be used at a time.

- The power of the external sound box should be within 330W.

• 8 channels mono inputs for microphone; Built-in 16 DSP effect processor
• 48v phantom power for condenser microphone; LCD can display lyrics
• Recording function - connects computer with USB cable; With USB Slot for playing MP3/WMA music directly
• It is suggested to use the external sound box within 12". When using the 12" or 10" sound box, up to 4 can be used at a time; The power of the external sound box should be within 330W
• 2-band equalizer on each channel and 5-band graphic equalizer on the main

User questions & answers

Question:	can the effects be turned ln / off with a footswitch
Answer:	You can hoop up up to 10 turntables. This is a 10 channel powered mixer.
Question:	Are there jacks for stage monitors? Do they have to be passive or powered monitors
Answer:	It’s new
Question:	Can i hook up two turntables
Answer:	It can record to computer with the USB port.
Question:	Si disculpe,mi pregunta es,¿este producto es usado oh nuevo
Answer:	Yes. It's a powered mixer

Product description

The GTD Audio BM-55 Amp/Mixer features 8 built-in, studio-grade mic preamps, 2 stereo channels, a 16-bit Professional effects, plus a 7-band stereo graphic EQ. The GTD Audio power mixer was developed using the expertise of professional sound engineers and working musicians. For its price range, it's rare to find a mixing console that compares with the BM-55 awesome performance, flexibility and crystal clear sound quality

• 500Watt + 500 Watt professional powered mixer at 8 ohms ( RMS )
• 8 channel, with onboard 16 type professionsl effect
• 8 mic/line channels with 48v phantom power for condenser microphone
• 2 stereo inputs with dual RCA for flexible connectivity
• 3-band EQ on each channel and 7-band graphic EQ on the main

User questions & answers

Question:	Will this unit fit into a 19" rack if I build adapter plates? In other words, is the unit no more than 17" wide
Answer:	We had same problem, adjust the gains of all input channels up to the mid point, then use the main to get the level you need over all.
Question:	are the channels mono or stereo? in otherwords can i use a 3.5mm stereo from laptop to a 1/4in stereo for channel
Answer:	The output of this mixer is nowhere near 4000.watts, it's a good mixer nice features, but the power output is more like 800 watts,........ if that!!!
Question:	How can I get it louder? I'm using passive speakers and 'Phones' is already all the way up
Answer:	No, it can't.
Question:	I have jbl tr225's. 4 ohms @ 450w-1800w peak rated. is the output of this bm-55 adequate to power these jbl's
Answer:	Powered

Product description

Description of RPM1470 : The Rockville RPM1470 is a 14-channel powered console mixer with USB input and Bluetooth. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mica preamps. We manufactured this mixer with XDR2 low noise mica preamps. These are some of the best sounding mica pore's on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24-bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests. We tested this and we ran the mixer to Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15” DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean. The great thing about this is the amp does not overheat even when cranking it for hours straight. The power amp built into this mixer is 500 x 2 RMS @ 8 ohms and 750 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings, but RMS is the true continuous output power you should look at. Other great features are a dual 7-band master EQ, a 4-band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool, is that you can record your main mix onto the USB or onto an SD! We also added Bluetooth to this mixer to give you all the latest and greatest options.

• Rockville RPM1470 14-Channel 6000 Watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power. RMS Power Output: 750 Watts x 2 @ 4 Ohm. 500 Watts x 2 @ 8 Ohm. Program Power Output: 1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output: 3000 Watts x 2 @ 4 Ohm. 2000 Watts x 2 @ 8 Ohm.
• 14 Channel mixer section: 12 mono channels, 1 stereo channel. 14 high-quality XDR2 mica preamps with switchable +48 V phantom power for condenser microphones. XDR2 mica preamps are low-noise and low distortion. These are some of the best sounding mica pore's on the market. Built in USB allows you to play songs from your computer or a thumb drive. Built in recording - allows you to record your main mix onto the USB or SD card . USB supported formats are MP3, WAV, WMA.
• Built in advanced Bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phase, flinger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off . 4-Band EQ (high, high-mid, low-mid, low) per channel.
• Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping . Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones . Limit L and Limit R LED indicators.
• These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R.

User questions & answers

Question:	I lost the power cord that came with this how much is the power cord
Answer:	1/4
Question:	Can i use this as a karaoke mixer/amplifier to drive my bose cinemate 15 speakers? will it burn the speakers because of the output load
Answer:	Look at Rockville line of speakers, I have 2 - 12 and 2 double 15” they do the job nicely, rock on friend !!!
Question:	Is the back female quarter inch inputs or 3.5mm inputs
Answer:	Yeah it will fit. it's exactly 17.5 inch wide at most
Question:	What are great low cost speakers for this
Answer:	Yes it is and it has many other options for input as well.

Product features

Rockville RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres

Description:

The Rockville RPM1470 is a 14-channel powered console mixer with USB input and Bluetooth. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre’s on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24-bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests.

Product description

Professional Grade Mixing with a Small Footprint

The ZEPHYR ZMX122FX is an 8-channel, 2-bus mixer with all the essential inputs, outputs, and EQ for solo gigs and multimedia studios. It features four mono channels with microphone inputs (including Phantom Power), balanced TRS inputs with three-band EQs, plus two stereo channels, each with two balanced TRS inputs. There's even a two-track input/output for added connectivity to external media players and recorders. In a nutshell, the ZMX122FX is the perfect compact take-anywhere professional mixer.



The Ins

The ZMX122FX is the ideal mixer for quick, hassle-free easy setup. Not only can you plug dynamic, condenser, and wireless microphones into the first four channels, but you also get two stereo channel inputs for keyboards, drum machines, and other instruments within your live arsenal. You can even plug in your MP3 player, CD players, or audio from a DVD player into the CD/TAPE input and hook-up to external recorders via the 2-track output.



The Outs

Whatever your situation demands, relax in the knowledge that ZMX122FX’s arsenal of inputs and outputs accommodates any scenario with ease. As well as the main stereo outputs, ZMX122FX also includes a dedicated control room output to send to a second pair of reference monitors. It’s easy to see why so many live performers and multimedia specialists choose the ZMX122FX as the audio central command for their live performances, home studios, or video suites.



256 Onboard Effects

Regardless of what you're mixing, give your mix a professional edge with 256 onboard 24-bit DSP effects designed in partnership with Alesis. The ZMX122FX offers 16 variations of 16 professional Alesis effects from which to build, tweak, and dial in your sound. There's even a footswitch input so you can bypass all effects hands-free (footswitch not included).

• A Mixer For Any Occasion: Sixteen total inputs with phantom powered XLR inputs on channels 1-4 - perfect for musicians looking for a compact mixing console for studio, podcast or live sound use
• Superior Sound Quality: High headroom circuitry offering extra dynamic range and ultra-low-noise for the best performance from your studio microphones
• Tweak Your Sound: Warm, natural three-band EQ on all channels for adding studio grade processing to all inputs including your dynamic, ribbon and condenser microphone signals
• The Ins & Outs: 1/4” Main, Control Room, Headphone & Aux outputs for flexible signal routing; Four mic input channels with XLR and balanced line inputs; two additional stereo input channels
• Studio Quality Built In Effects: 256 onboard 24-bit DSP effects from Alesis including reverb, delay, chorus and phaser; Footswitch input for effects on/off (footswitch sold separately)

User questions & answers

Question:	How do i eq from rca inputs? rca inputs/outputs doesn't have eq settings like the other channels have
Answer:	ALTO support here! The RCA aux inputs don't have the option of EQing. If you prefer EQing the audio, I would recommend using a cable that has 2 1/4" connections so you can plug your audio source to channel 5/6. This will allow you to play your stereo signal through a channel on the mixer with EQ options. If you have any other questions, please feel free to call or email us using the contact information on altoproaudio.com/contact.
Question:	How to remove aux/Channel 2/3 or 4/5 audio input from main mix out but leave mic 'phone monitoring and output enabled
Answer:	I have a different Model of Mixer but I'll try although I'm not clear about the meaning of your question. The Mic Channel (1) and Line Input Channels (2/3 and 4/5) are always assigned to the Main Output and the Headphones. The AUX Inputs (L and R Phonos) can be sent to the Headphones and The Main Mix with the switches above the Headphone Volume Control. Since I don't know what result you're trying to achieve, this may not be the reply you want, sorry.
Question:	can i connect passive speakers to this mixer? would it work as speaker amp
Answer:	The ZMX52 5-channel will not work as a speaker amp. Nor can you connect passive speakers to this mixer .
Question:	I have separate dj & karaoke setups & need a sound mixer (fx) exclusively for my karaoke player & mic's to powered speakers. is this a best option
Answer:	I have used this mixer for that exact application & it works great. I suggest taking the music into a pair of the channels that could be used for mics. I prefer this because you get the three levels of EQ when you do that. These controls work very well.

Product features

Alto Professional ZMX122FX

The ZMX122FX packs an enormous amount of features into a very compact space, but we took a no-compromise approach where the purity of your mix is concerned. This compact mixer brings the same standard of quality to your performances as our top-of-the-line models. The Alto Pro ZMX122FX has professional-grade mixing features with a go-anywhere attitude.

Professional Mixing Features

The ZMX122FX is an eight-channel, two-bus mixer with all the essential inputs, outputs, and EQ for any and all live shows. It features 4 XLR inputs, 2 aux sends per-channel, a three-band EQ and more!

Built-in FX

Choose from room and space delays, small and large hall acoustics, plate and spring reverbs, flangers, chorus effects and more! The ZMX122FX offers 16 effects to build, tweak, and dial in your sound.

Visualize Your Mix

Blue, red, yellow and white pots are easy to identify in dim lighting. The bright LED indicators for output level, peak, and phantom power assist in making sure that visual cues compliment what you're hearing.

Versatile Inputs and Outputs

The ZMX122FX is the audio swiss army knife you need. Plug in microphones, keyboards, drum machines, MP3 or CD players, or audio from a DVD player. Choose the ZMX122FX as the center of your live performances

Features

16 total inputs including XLR jacks w/ phantom power on ch. 1-4.

4 mic input channels with gold-plated XLR and balanced line inputs.

Two stereo input channels with balanced TRS jacks.

2 aux sends per channel for external effects and monitoring.

2-bus design with Main and Control Room 1/4” stereo outputs.

• KEEP YOUR AUDIO GEAR AND STUDIO RECORDING EQUIPMENT WITHIN ARM’S LENGTH. : Store all your outboard gear, amplifiers, or signal processors and keep them within easy reach of your auto locator or studio mixer with the help of this heavy-duty, all-steel, 19 spaces rolling rack mount stand. Its highly versatile design gives you plenty of options to help you arrange your DJ or stage gear according to your needs. Equipped with 4 durable, smooth-gliding caster wheels (two are lockable).
• ADJUST THE PRO AUDIO RACK RAILS ANGLE FOR MAXIMUM VISIBILITY: The top mixer platform features 10 space mounts and is designed to accommodate any mixer measuring up to 36 inches in width, 27 inches in length and 3 inch depth, or any unit that is oversized or otherwise not easily rack-mountable (up to 175 pounds without casters). Also, the special knobs on each side of the platform allow you to adjust the angle to your preferred position: entirely flat or slanted to allow for easier visibility.
• AUDIO EQUIPMENT RACK STAND WITH 2 PADDED STRIPS FOR ADDED PROTECTION: To help you hold your expensive equipment safely in place, we have included two rail strip pads that you can easily apply on the top platform. Together with the metal lips located at the end of each platform arm, they will prevent your mixer from sliding down. Specs: Height: 32 inches (when top platform is level) to 37.5 inches (when slanted at max angle). Depth: 19.75 inches Width: 24.75 inches
• A PORTABLE SOUND BOOTH / AMP STAND THAT SETS UP EASILY: The bottom rack-mount features nine space vertical, American standard-sized rack mount holes that will easily fit all standard studio rack gear. Included in the pack, you will also find a set of 20 rack screws (Rackmount screw size is the standard 10-32 thread size). The beautiful black finish gives this DJ standing display case a professional look that is hard to beat.
• 1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and stage lighting packages, and everything in between comes with our exclusive, 30-day money back return policy and a premium 1-year warranty! All you have to do is contact us within 30 days to request a return, or within 365 days from purchase to request a warranty replacement.

User questions & answers

Question:	Will an allen and heath mixwizard 16:2 wz3 fit
Answer:	I had a behringer x32 compact, which essentially just sat on the top rails. It wasn't attached or screwed down at all. So it depends how wide the yamaha is, and how wide the x32 was. If you can't find the dimensions on the rack I can measure it
Question:	Also wanted to ask does this come in a lower vertical profile
Answer:	I do not know the size. However, I can say that it comes with enough of the right size to fill the rack. I have a mixer on top, with a mic preamp below it, and on the lower section, I have a power conditioner, rack mounted server, and various channel strips. No problem with any of the screws that came with the rack. Great Rack for the price.
Question:	Will the top rackmount fit yamaha mgp16x
Answer:	You should be able to use any power cord that came with a computer or amp.
Question:	What thread size screws fit this rack? Please don't answer with "standard size" - that's not helpful
Answer:	You should be fine - check OHM's but you should be good. I run it with 2 yamaha 12's for monitors and 2 yamaha 15's for mains. I sometimes just run one speaker - you're safe..

Product features

Griffin Is a US Brand that is Owned & Proudly Operated in Tyler, TX USA

Griffin, is a small owned brand in Tyler, Texas, USA. Since 2011, the Griffin brand, has been specializing in the development, design, and quality improvement of its snare drums, drum accessories, dj speaker and dj light stands, music studio equipment stands and other musical and stage performance accessories. Whether you’re just starting out in search for dj equipment for beginners or a professional looking for music recording equipment, Griffin has a product for you. We put that belief into practice every day by offering dependable products made with high quality, durable materials that will last a lifetime.

We Have Passion! Griffin is 100% operated by Musicians & DJ’s

We feel strongly that a brand that specializes in music gear accessories should also be fully staffed by people who have a passion and love for the product. So, Griffin is fully operated by musicians and DJs. We have complete understanding of all our products from portable stage platforms, audio racks, to adjustable keyboard stands, because we commonly use our own pro-audio gear. As such, we understand you, the fellow musician and are always here to help. Additionally, as a proud, USA brand, Griffin only authorizes sellers which are completely based in the USA.

Metal Parts Durability Stress Test

Specifications are important, and knowing the capacity loads is a must. For every new design our factories go through rigorous stress testing to confirm the stated load capacity of our products. Additionally, as musician’s, we always like to do a personal test with real use results. We use our own equipment to load up the product above the weight capacity to confirm the product still performs as it should in real situations.

Quality Powder Coating Process at Our Factories

Our factories focus on quality and durability of the powder coating process. Metal parts are individually prepped, sanded, hung, coated and re-coated again. We ensure accurate color matching and use the highest quality of paint materials to ensure long lasting durability with rust protection and prevention. This results in uniform high-quality smooth finishes without sags or drip marks. Additionally, our paints are inspected at the factories to be environmentally save, by passing or exceeding TCCA Title VI (EPA) compliant standards.

19 Space Mixer Studio Rack Stand on Wheels By Griffin

This studio equipment rack stand with casters is perfect for today’s modern musician. While the all-steel construction is sturdy and durable on this dj rack cart, also flexible with a top mixer platform mount that should easily hold any audio mixer or unit that measures up to 36" wide by 27" long by 3" deep. The bottom rackmount features 9 vertical space mounts and the top platform rackmount supplies 10 space mounts. This can also accommodate mixers that are over-sized for a standard rackmount case and/or not rack-mountable. Two included padding strips may be applied to the top 10 space mounting platform to hold the mixer or unit, and the metal lip located at the end of each arm on the top platform will keep the mixer from sliding down. The maximum recommended mixer size is 36" wide by 27" long by 3" deep. The knobs on each side of the top platform will allow the user to adjust the angle of the top rack-mountable mixer platform; it can be adjusted to a level surface or to a slanted angle for easier visibility. Two of the four heavy-duty steel casters feature a lockable option to hold the stand in place.

KEEP YOUR AUDIO GEAR AND STUDIO RECORDING EQUIPMENT WITHIN ARM’S LENGTH

Store all your outboard gear, amplifiers or signal processors and keep them within easy reach of your auto-locator or studio mixer with the help of this heavy duty, all steel 19 space rolling rack mount stand. Its highly versatile design gives you plenty of options to help you arrange your DJ or stage gear according to your needs. Equipped with 4 durable, smooth gliding caster wheels (two are lockable), it is easy to move around safely and effortlessly.

ADJUST THE PRO AUDIO RACK RAILS ANGLE FOR MAXIMUM VISIBILITY

The top mixer platform features 10 space mounts and is designed to accommodate any mixer measuring up to 36 inches in width, 27 inches in length and 3 inch depth, or any unit that is over-sized or otherwise not easily rack-mountable (up to 175 pounds without casters). Also, the special knobs on each side of the platform allow you to adjust the angle to your preferred position: entirely flat or slanted to allow for easier visibility.

AUDIO EQUIPMENT RACK STAND WITH 2 PADDED STRIPS FOR ADDED PROTECTION

In order to help you hold your expensive equipment safely in place, we have included two rail strip pads that you can easily apply on the top platform. Together with the metal lips located at the end of each platform arm, they will prevent your mixer from sliding down and assures maximum protection from accidents. Specs: Height: 32 inches (when top platform is level) to 37.5 inches (when slanted at maximum angle). Depth: 19.75 inches Width: 24.75 inches

A PORTABLE SOUND BOOTH / AMP STAND THAT SETS UP EASILY

The bottom rack mount features 9 space vertical, American standard sized rack mount holes that will easily fit all standard studio rack gear. Included in the pack you will also find a set of 20 standard rack screws (Rackmount screw size is the standard 12-24 thread size), so you can save yourself from last minute trips to the hardware store! The beautiful black finish gives this DJ standing display case a sleek, professional look that is hard to beat.

19 Space Mixer Studio Rack Stand on Wheels Specifications

• 19 space total
• 9 space on bottom vertical rails and 10 space on top slanted platform rails
• Height: 32 inches (when top platform is level) to 37.5 inches (when top platform is slanted at its maximum angle)
• Total depth: 19 ¾ inches
• Total width: 24 ¾ inches
• Mixer top platform width: 21 inches
• Mixer top platform length: 21 inches
• Commercial grade steel frame square tubing 1.5 inches x 1.25 inches and crossbar tubing 1.25 inches x 1.25 inches
• Caster size: 1 inches x ⅔ inches (50 mm x 17 mm)
• Lip height above top mixer platform: 1 ⅛ inches
• Height clearance above ground: 3 inches
• Weight load: 175 pounds (without casters) 110 pounds with casters
• Gross weight: 19 pounds

Product description

The RXS20 is the best mixer stand on the market! This mixer is universal and

Works with any mixer up to 300lbs! The stand is made out of steel making it

the RXS20 is collapsible for maximum portability and easy storage.



what is very unique about this stand is how adjustable it is.



you can adjust the width from 13.8” - 23.6” making this perfect for any mixer,

dj controller, or other device.

all the adjustments are quick and easy with our state-of-the-art adjustment

it comes equipped with soft padding to mount your audio gear on to prevent

it also has rubber feet on the end of each leg As well to make the stand sturdy.

• Universal with any mixer up to 300 collapsible for maximum portability and easy storage
• Adjustable width (13.8” - 23.6” inches) making this universal for any mixer and other gear Adjustable height from 24” - 36” (inches)
• Steel stand with sturdy arms large enough for mixers, DJ gear, keyboards, and more
• Soft padding on mounting platform to protect your audio devices rubber feet on the end of each leg when CASTERS are not in place
• 14.5 lbs (portable and light-weight)

User questions & answers

Question:	What’s the degree of tilt if any
Answer:	Great piece.. but sometimes it's confusing how to add the arms on....slot of twist n turns get it fit on the legs..
Question:	Will my Allen and Heath - Zed 10fx fit on this rack
Answer:	No. The A&H Zed is 13.2 wide while the most narrow setting on the RXS20 is 13.8 My suggestion is to use some plywood (probably 3/8 or 1/2) as a shelf. Cut the plywood so that you have plenty of room to spread the upright legs further apart (MAXIMUM WIDTH IS 23.6 inches). Wider footprint is MORE STABLE. Yes, I own a Rockville RXS20. Wide "shelf" will also let you keep other items on the rack as needed...mp3/iPad or other media source, hand mic, tuner, picks, etc.
Question:	Will this fit yamaha mgp16x which measures 24inches by 24inches
Answer:	I am using the Yamaha 16 with this stand.
Question:	Is there a carry bag or case that will fit the collapsed mixer stand
Answer:	I’m going to say that this stand is about 2’x3’x2” collapsed, with a couple of additional small loose pieces. So I’m not aware of a case for it, you would almost need a small suitcase.

Product features

Rockville RXS20

This mixer is universal and works with any mixer up to 300lbs! The stand is made out of steel making it sturdy and tough! This stand has a sleek black powder paint coating making it look very professional! The RXS20 is collapsible for maximum portability and easy storage. What is very unique about this stand is how adjustable it is. You can adjust the width from 13.8” - 23.6” making this perfect for any mixer, DJ controller, or other device. The height is adjustable from 24” - 36”. All the adjustments are quick and easy with our state-of-the-art adjustment mechanisms. It comes equipped with soft padding to mount your audio gear on to prevent against any scratches on your device. It also has rubber feet on the end of each leg as well to make the stand sturdy.

Features:

Product description

12 Channel DSP Professional Powered Mixer - Model: LandSlide-12P, 12 discrete input channels with gold plated XLR and balanced 1/4", 200 Watts RMS at 8 ohm, 400 Watts RMS at 4 ohm, 600 Watts RMS at 2 ohm, Overload Protection, Ultra low noise discrete mic pre-amp with +48 V phantom power, Balanced inputs for highest signal integrity, Ultra musical 2-band EQ on all channels, Peak LED on each input channel, Aux bus for external effect and monitoring, Simulate effect (16 DSP), RCA input / output, Highly accurate 5 segment bargraph meters, Separate master mix outputs, 5 Band Graphic EQ, 2 Speak On per channel output (4 total Speak On). SpecificationsMono InputsMic Input B: Electronically balanced discrete input configurations, Bandwidth: 10 Hz to 60 kHz +/- 3 db., Distortion (THD&N): 0.01% at +4 dbu, 1kHz, Bandwidth 80 kHz, Mic E.I.N. (22 Hz - 22 kHz): -129.5 dBu, 150 ohm source, -117.3 dBqp, 150 ohm source, -132.0 dBu, input shorted, -122.0 dBqp, input shorted. . TRIM range: +10 dBu to 60 db., Line Input: Electronically balanced, Line Level Range: +10dBu to 4 dBu. Equalization: 12 kHz +/- 15 dB, Low: 80 Hz +/- 15 db. Master Mix SectionMax Output: +22 dBu balanced, Aux Send Max Out: +22 dBu unbalanced, Control Room Out: +22 dBu unbalanced, Signal to noise ratio: +112 dB all channels at unity gain.

• Model: LandSlide-12P
• 12 Channel DSP Professional Powered Mixer
• 12 discrete input channels with gold plated XLR and balanced 1/4"
• 200 Watts RMS at 8 ohm
• 400 Watts RMS at 4 ohm / 600 Watts RMS at 2 Ohm

User questions & answers

Question:	What is the warrenty
Answer:	Hello. I don't know if Amazon will block our link from our site, but we have the manual on our website. I'll Paste it here http://cdn-tp1.mozu.com/2199-2317/cms/2317/files/Professional%20Mixing%20Console%20LANDSLIDE%20new%20update.pdf
Question:	Does this unit work with RCA inputs or other inputs from laptops, and also play to speakers in stereo
Answer:	Hi James,The Landslide-12P powered mixer does have powered Speakon outputs on the back panel. There are 2 output channels, Left and Right. Within each output channel, you have an A and B output, but remember these are factored together for the overall impedance on that channel. As far as powering mains vs. monitors, you could run you mains off the left output and your monitor off of the right. This would give you separate control over the levels of mains vs. monitor, but does not allow you to control what input channels are allowed access to the monitor, i.e. you can not create a separate "monitor mix" and send to the powered outputs. There is a line-level Aux send, which can be used to create a separate "monitor mix," which you can then send to a separate power amplifier or to some powered monitors. Let us know if you have any questions.Thanks,Rusty
Question:	You can't zoom in on these pictures, do you have any other pictures anywhere? Or a schematic of the controls
Answer:	From what I see on the wizard 16 dimensions is that it needs 10 unit rackspace. The top opening on this rack is 10 units (17-1/2" between the bars on top and bottom) so it will fit but not if you flip up the pod/cable mount. It would have to be located under the unit.
Question:	Can this drive three passive speakers (2 mains and 1 monitor
Answer:	It's totally adjustable..... nearly any angle you need. I set mine ( see locking handles in picture ) to a much less angle as shown.