Product description

6-Ch. Bluetooth Studio Mixer - DJ Controller Audio Mixing Console System

Features:

DJ & Studio Console Mixer System

Multi 6-Channel Audio Source Mixing

Built-in Bluetooth Wireless Receiver

FX (Analog Effects) & 16 Bit DSP processor

Direct-to-Computer Connect & Sound Record Ability

LCD Digital Display & Front Panel Control Center

Rotary Adjustment Knobs & LED Indicator Lights

MP3 Digital Audio File Compatibility

USB Interface: MP3 Flash Drive Reader/Computer Connection

Connect & Stream Audio from External Devices

1/4’’ (L/R) MAIN Outputs

XLR/14’’ Combo Audio LINE/Microphone Inputs

1/4’’ Mono + Stereo Inputs

1/4’’ Send + Return Inputs

1/4’’ Headphone Jack

Stereo Level Fader/Slider

Output Signal Level Indication

BUS Audio Control, Sound Routing

PAD Channel Source Input Switch

Independent Channel Input Audio Configuration

Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment

+48V Phantom Power Control

Power ON/OFF Switch

Used for Professional Studio Applications & On-Stage Performances

What’s in the Box:

Bluetooth Studio Mixer

Power Adapter Cable, 4-Pin

Wireless Bluetooth Connectivity:

Hassle-Free Audio Streaming Ability

Works with All of Today’s Latest Devices

(Smartphones, Tablets, Laptops, Computers, etc.)

Bluetooth Network Name: ‘KT-08UP’

Bluetooth Version: 4.0

Wireless Range: 15’+ ft.

Technical Specs:

Input Mixer Channels: 6-Ch. (+ FX/Headphones)

Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm

Input Frequency Response: 20Hz-20kHz, +/-3dB

Input Distortion: 0.03%, 1kHz/150mV Input

Channel GAIN Adjustment: +20/+64 (-6/+38)

HIGH Gain: +/-15 dB, 12kHz Frequency Shelving

MID Gain: +/-15 dB, 2.5kHz Frequency Shelving

LOW Gain: +/-15 dB, 80kHz Frequency Shelving

HIGH/MID/LOW Adjustment: -15/+15dB

Stereo Output Level Meter: 5-Segment (+6, +3, 0, -3, -10dB)

PAD Input Channel Adjustment: 26dB

Peak CLIP Level: < 3dB

Phantom Power Voltage: +48V

Power Supply: 100/240V (+/-15V DC Power Adapter)

Digital Audio File Compatibility File-Types: MP3, WAV

Dimensions (L x W x H): 9.3’’ x 9.7’’ x 2.6’’

• USB/FLASH READER/MP3 COMPATIBILITY - Connect your external USB, computer PC, flash drive or Bluetooth device to mix & record. Use the built-in controls to play/pause, skip tracks and switch between modes.
• BLUETOOTH WIRELESS STREAMING - Hassle and cable-free audio streaming ability directly to the console unit. This audio mixer can wirelessly stream music tunes from iPad, iPhone and Android Smart Phone with mixing board from Pandora or Spotify.
• MIC AND STEREO LINE INPUTS - Supporting XLR and unbalanced 1/4" Plug with +48V Phantom button, highly accurate LED Peak Level Indicator and Ultra-musical 3-band EQ on all channels. Ultra-low noise, high headroom mixer with super easy functionality.
• RUGGED STEEL CHASSIS - With sealed rotary controls to resist dust and grime, this compact DJ Mixer will provide total dynamic control. This incredibly versatile mixer is great for high quality on stage performance, live gigs and Karaoke.
• NEW MULTI-VOLTAGE POWER SUPPLY - 100V-240V (+/-15V DC power adapter) ideal for worldwide usage. Enjoy a value packed mixing solution today with performances that sound great each time.

User questions & answers

Question:	Can i use the usb out to connect to my computer while still using channels 5/6 as an input
Answer:	No, it’s one or the other. There is a two position switch to choose.
Question:	Do I also need a separate headphone amp for a podcast or will this work
Answer:	No. You can plug in your headphone directly in the unit. It requires a 1/4 jack. If you are broadcasting live, you need to plug your headphone directly to the source you are broadcasting to, ie: computer mixer audio board output, otherwise you will get feedback, in this case, plugging to the Pyle unit won't help you. The Pyle unit's headphone jack will only let you hear the sound being mixed in the unit.
Question:	Is this a powered mixer
Answer:	Its just a mixer. It has no Amp. It is suppose to be connected to an Amplifier. So the Question. if you mean by power,watts or loudness, is not applicable.
Question:	What is the power output, of this unit. I am looking to use it, with (2) 10" speakers, mike, and (2) inputs. Speakers are passive (non powered
Answer:	This unit is Just a mixer ONLY. It has to be used with either a power amp or powered speakers. I have a 1000 watt amp that powers two 450 watt speakers. I entertain at Senior Facilities and use it over 200 times a year.

Product features

About us

In the late 20th century, Pyle established itself as a premium source for replacement speakers and car audio. By the year 2000, Pyle had undergone a massive transformation, expanding into the nascent market spaces of competitive car audio, home audio, marine audio, and professional audio & musical instruments - our Pyle Pro line. As you sit in your car, you are isolated from outside noise and surrounded by speakers. You become enveloped in sound. We have a wide range of speakers, amplifiers, and head units that will enrich your car audio experience. You’d be surprised at how much better your music can sound with an upgrade from the factory speakers and amplifier.

Product description

The Rolls RM82 Mic/Line Mixer is an eight channel mixer in a single rack space intended for a variety of sound reinforcement applications including board rooms, churches, mixing console expansion etc. Virtually any application where up to eight microphones need to be mixed together, and space is limited, is met by the RM82. Each of the eight channels has an XLR microphone input, as well as a 1/4" unbalanced input. The 1/4" jacks may be internally reconfigured to become channel Inserts or Direct Outputs. Inserts provide a way to get each individual channel signal in and out of the RM82 mainly for processing purposes. A Direct Output is simply taking the signal from the channel only. Each channel has individually switchable +48 VDC phantom power. The RCA Prefade (pre Master Level) Output may be connected to the RCA Aux Buss Input for cascading two RM82 units together. This Output may also be used for recording purposes, and the Aux Buss Input. The Main output for the RM82 is a balanced male XLR jack. This output may be internally jumpered for a Line or Mic level.

• Eight XLR microphone inputs - Eight 1/4" unbalanced inputs, each may be internally jumpered to become an Insert or a Direct Output
• Trim controls - Tone controls (treble/bass cut)
• Individually switchable +48 VDC phantom power
• RCA Prefader (pre Master Vol.) Output for recording, monitoring or cascading
• RCA Aux Buss Input for cascading, or as a ninth unbalanced input - Mic or Line output level

User questions & answers

Question:	What is the actual dimensions of this unit (Length, Width and Height). 5 x 5 x 5 inches definitely does not seem correct
Answer:	Yes, this unit comes with the power supply.
Question:	What is the warranty in this item
Answer:	Yes you can use the headphone output
Question:	Can this be configured as a 8 independent channels of XLR-mic pre-amp to line out
Answer:	I haven't had that experience. On mine they were all about the same. It could depend though on how you are plugging into the channel. For instance if you were plugging a microphone without an impedence matching device LoZ-HiZ into your 1/4" inputs on channels 1 and 2 the sound would be really low. Then if you plug into channel three with the microphone XLR the sound would be much brighter / louder because the impedence matching is done inside the amp. The 1/4" inputs are all HiZ and the XLR is a LoZ input. If this isn't your issue I would contact Peavey and ask.
Question:	Does this unit produce output to speakers and if so how many watts
Answer:	Weighs around 50LB Approx 2' X 2' X 1.5' makes it easy to travel with.

Product description

Features:

- Fits bluetooth function

- USB plug and play

- Lightweight and portable

- Each mono with 3-band equalization

- 6 kinds of music modes

Specifications:

Maximum input level of the microphone: +24dBu

Line maximum input level: +24dBu

Maximum output level: XLR card + 26dBu

Main level meter: 10-segment LED, -24dB to CLIP

Frequency response: 20Hz-30Khz±0.5dB

Maximum power input power: 15W

Total chopping distortion (RHD+N): <0.01%

Crosstalk (1kHz): fader off >85dB channel >82dB

Noise (22Hz-22KHz): Equivalent input noise -122dBu Remaining output noise <-90dBu

Mono/stereo channel EQ: high frequency +/-15dB, 12KHz low frequency +/-15dB, 80KHz high IF +/-15dB, 2.5KHz

2-track return: RCA lotus seat, unbalanced, 4K ohm, -2dBu

2-track transmission: RCA lotus seat, unbalanced, <75 ohm, -2dBu

L/R output: XLR, balanced, tip hot end, <75 ohm, +4dBu, max +22dBu

FX/AUX output: TRS, unbalanced, tip hot end, <75 ohm, -2dBu, max +18dBu

Headphones: TRS, Tip L, Ring R, Recommended 30 to 600 ohm headphones

Size: 400mm*340mm*37mm

Package Includes:

1 x Professional Mixer

1 x Power Adapter(US Plug)

1 x User Manual

Note:

1. Does not record with usb interface.

2. If you want to computer recording, you can only use the line to connect the mixer output and then the computer microphone input.

3. This is a pure mixer, not a microphone.

4. Does not connect usb to record. All mixers have no internal recording function.

5. If you are not satisfied with our products or there are any defects in the products, please contact us by email. We help you replace it with a new one or give you a full refund, thank you~

• Professional Performance DSP Mixer: Built-in digital effector/single channel 3-segment equalization/USB socket/Bluetooth wireless connection support.
• Mono/Stereo Channel Input: With +48V Phantom Power Supply, Support Wired/Wireless/Capacitive Microphone Input, High Quality Microphone Amplifier.
• LED Indicator Lights: The recording mixer has LED indicator lights and rotary adjustment knobs for user convenience. It has input selection, master volume controls, independent channel balance and high, plus, low frequency adjustment.
• Scientific Air Cooling System Design: The back of the mixer is designed with an air-shaped heat dissipation port to dissipate heat quickly, providing a strong guarantee for the stable operation of the machine.
• Intelligently Compatible Various Equipment: It has complete functions and can be connected with various electronic equipment with audio input interface, and can be used for more large, medium and small occasions.

User questions & answers

Question:	Can the built-in audio interface do multi-track recording
Answer:	It will do stereo (2 channels: Left & Right). Multiple tracks would require multiple passes into a multitrack recorder. If you want to simultaneously record 3 or more separate voice and/or instrument tracks, each to it own track, this is NOT what you need.
Question:	Es amplificado
Answer:	SI
Question:	Does effects also go aux send
Answer:	No, every channel has an effect, and AUX is auxiliary.
Question:	whats the code for bluetooth connection Ive tried 2 different phones and 1 tablet none of them are receiving code
Answer:	Only one Bluetooth can be connected.

Product description

BEHRINGER XENYX 1202FX. Long-wearing 60-mm logarithmic-taper fader and sealed rotary controls

• Premium ultra-low noise, high headroom analog mixer
• 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic "British" 3-band EQs for warm and musical sound
• Studio-grade stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• FX send control per channel for internal FX processor and/or as external send

User questions & answers

Question:	FX has long echo effect. Does it provide good echo effect as that of other mixers? Is echo effect is also in Behringer 802 mixer
Answer:	This is the correct cable to use when going stereo to mono. Stereo(2 black rings on actual 3.5mm input prong) to mono(one black ring on 1/4" input prong). BUT 'thru your i-phone'? IDK, thats a little vague. I use this cable with a Guitar/I-Rig/I-Pad/AMP. Guitar 1/4" patch cable out from I-Rig to Guitar.This cable's 3.5mm stereo end from I-Rig to AMPLIFIER 1/4" input. I-Rig into I-Pad headphone jack.
Question:	Is this effects mixer good for Karaoke
Answer:	There are no resistors in this wire. The stereo signals are simply shorted together. This cable's proper use is 1/4" mono output to a 3.5mm stereo input.
Question:	I keep seeing that a mixer doesn’t record voices?? how can i use this for a podcast? whatelse do i need
Answer:	I've been using it to connect ipad/iphone/portable DVD player to a PA system with no problems at all.
Question:	Can you apply the digital effects to just certain inputs like 2 mics, but leave the music alone? I'm looking to upgrade from the 802 without FX
Answer:	It's designed to split in 2 outputs from 1 input and not 3 outputs

Product features

XENYX 1202FX

The compact XENYX 1202FX mixer allows you to effortlessly achieve premium-quality sound, thanks to its 4 onboard studio-grade XENYX Mic Preamps and ultra-musical 'British' channel EQs. Add to this our 24-Bit, dual engine FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects – and the 1202FX becomes an incredibly versatile mixer for your live performances.

Sonically Superior Mic Preamps

The XENYX 1202FX gets its name from our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of the- art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the XENYX 1202FX provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Built-in Digital Multi-FX Processor

Equipped with our studio-grade 24-bit Multi-FX processor, the 1202FX gives you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. Of course, if you have treasured outboard gear you’ve grown attached to, the 1202FX lets you integrate them into the mix – bypassing the built-in FX processor.

The Ins and Outs

The 12-input, 2-bus XENYX 1202FX has 4 XENYX mic preamps with +48 V phantom power, making it possible to use 4 dynamic or condenser microphones. The 3-band British EQ is lauded throughout the sound engineering world for its warm, musical sound. You can use the world-class onboard stereo FX processor, or the FX Send jack for connecting to your favorite external effects. The built-in RCA CD/Tape Inputs (main mix or control room/phones assignable) and Outputs let you play music between sets, and record your performance to outboard recording gear, respectively.

Amazing Value

No matter what your audio mixing needs, the XENYX 1202FX provides the performance and features that can take your talent to the next level, at a price sure to amaze you. Professional sound quality, our legendary XENYX mic preamps, British EQs and 24-Bit Multi-FX Processor make the XENYX 1202FX ideal for your live gigs. Try one on today – we have one available in your size!

Product description

Pyle Model : PMXU83BT

8Ch Bluetooth Pro Audio DJ Sound Mixer

8Ch. Bluetooth Studio Mixer DJ Controller Audio Mixing Console System

Features:

• DJ & Studio Console Mixer System
• Multi 8Channel Audio Source Mixing
• Builtin Bluetooth Wireless Receiver
• FX (Analog Effects) & 16 Bit DSP processor
• DirecttoComputer Connect & Sound Record Ability
• LCD Digital Display & Front Panel Control Center
• Rotary Adjustment Knobs & LED Indicator Lights
• MP3 Digital Audio File Compatibility
• USB Interface: MP3 Flash Drive Reader/Computer Connection
• Connect & Stream Audio from External Devices
• 1/4’’ (L/R) MAIN Outputs
• XLR/14’’ Combo Audio LINE/Microphone Inputs
• Pair RCA (L/R) Inputs
• Pair 1/4’’ Mono + Stereo Inputs
• 1/4’’ Send + Return Inputs
• 1/4’’ Headphone Jack
• Stereo Level Fader/Slider
• Output Signal Level Indication
• BUS Audio Control, Sound Routing
• PAD Channel Source Input Switch
• Independent Channel Input Audio Configuration
• Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment
• +48V Phantom Power Control
• Power ON/OFF Switch
• Used for Professional Studio Applications & OnStage Performances

What’s in the Box:

• Bluetooth Studio Mixer
• Power Adapter Cable, 4Pin

Wireless Bluetooth Connectivity:

• HassleFree Audio Streaming Ability
• Works with All of Today’s Latest Devices
• (Smartphones, Tablets, Laptops, Computers, etc.)
• Bluetooth Network Name: ‘KT08UP’
• Bluetooth Version: 4.0
• Wireless Range: 15’+ ft.

Technical Specs:

• Input Mixer Channels: 8Ch. (+ FX/Headphones)
• Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm
• Input Frequency Response: 20Hz20kHz, +/3dB
• Input Distortion: 0.03%, 1kHz/150mV Input
• Channel GAIN Adjustment: +20/+64 (6/+38)
• HIGH Gain: +/15 dB, 12kHz Frequency Shelving
• MID Gain: +/15 dB, 2.5kHz Frequency Shelving
• LOW Gain: +/15 dB, 80kHz Frequency Shelving
• HIGH/MID/LOW Adjustment: 15/+15dB
• Stereo Output Level Meter: 5Segment (+6, +3, 0, 3, 10dB)
• PAD Input Channel Adjustment: 26dB
• Peak CLIP Level: < 3dB
• Phantom Power Voltage: +48V
• Power Supply: 100/240V (+/15V DC Power Adapter)
• Digital Audio File Compatibility FileTypes: MP3, WAV
• Dimensions (L x W x H): 9.3’’ x 10.8’’ x 2.6’’

 

The Pyle 8Ch. Bluetooth Studio Mixer DJ Controller Audio Mixing Console System DJ & Studio Console Mixer System Multi 8Channel Audio Source Mixing Builtin Bluetooth Wireless Receiver FX (Analog Effects) & 16 Bit DSP processor DirecttoComputer Connect & Sound Record Ability LCD Digital Display & Front Panel Control Center Rotary Adjustment Knobs & LED Indicator Lights MP3 Digital Audio File Compatibility USB Interface: MP3 Flash Drive Reader/Computer Connection Connect & Stream Audio from External Devices 1/4’’ (L/R) MAIN Outputs XLR/14’’ Combo Audio LINE/Microphone Inputs Pair RCA (L/R) Inputs Pair 1/4’’ Mono + Stereo Inputs 1/4’’ Send + Return Inputs.

• USB/Flash Reader /MP3 Compatibility : Connect your external USB, computer PC, flash drive or Bluetooth device to Mix & record; Use the built in controls to play/pause, skip tracks and switch between modes
• Bluetooth Wireless Music Streaming : Hassle and cable free audio streaming ability directly to the console unit; Mix your iPad, iPhone, Android smart phone to your DJ session; This audio mixer makes it a breeze to wirelessly stream all uour favorite music tunes to the mixing board easily from Pandora or Spotify
• MIC + Sterero Line Inputs : Supporting XLR and unbalanced 1/4" plug with +48V phantom button, highly accurate LED peak level indicator and ultra musical 3 band EQ on all channels; Ultra low noise, high headroom mixer with super easy functionality for professional vocal and instrumental sound
• Rugged Steel Chassis: With sealed rotary controls to resist dust and grime, this compact DJ mixer will provide total dynamic control for the ultimate in punch and clarity; This incredibly versatile mixer is great for high quality on stage performance, live gigs, and Karaoke; Effortlessly achieve premium quality crystal clear studio level quality musical playback
• New Multi Voltage Power Supply : 100V 240V (+/ 15V DC Power adapter) ideal for worldwide usage; Enjoy a value packed mixing solution today with performances that sound great each time

Product features

Professional Audio Mixer

With sealed rotary controls to resist dust and grime, this compact DJ mixer will provide total dynamic control for the ultimate in punch and clarity; This incredibly versatile mixer is great for high quality on stage performance, live gigs, and Karaoke; Effortlessly achieve premium quality crystal clear studio level quality musical playback

USB/Flash Reader /MP3 Compatibility

Connect your external USB, computer PC, flash drive or Bluetooth device to Mix & record; Use the built in controls to play/pause, skip tracks and switch between modes

Bluetooth Wireless Music Streaming

Hassle and cable free audio streaming ability directly to the console unit; Mix your iPad, iphone, Android smart phone to your DJ session; This audio mixer makes it a breeze to wirelessly stream all uour favorite music tunes to the mixing board easily from Pandora or Spotify

Mic and Stereo Line Inputs

Supporting XLR and unbalanced 1/4" Plug with +48V Phantom button, highly accurate LED Peak Level Indicator and Ultra-musical 3-band EQ on all channels Ultra-low noise, high headroom mixer with super easy functionality

8 Channels High Headroom Mixer

Supporting XLR and unbalanced 1/4" plug with +48V phantom button, highly accurate LED peak level indicator and ultra musical 3 band EQ on all channels; Ultra low noise, high headroom mixer with super easy functionality for professional vocal and instrumental sound

Product Dimension

The Pyle Professional Audio Mixer has Dimensions (L x W x H): 9.3’’ x 10.8’’ x 2.6’’ with 5.2 lbs of weight, So you can easily carry everywhere you go.

Built-in Digital Effects

For musical and non-musical applications, effects processing adds polish and professionalism to the mix. The Professional Audio Mixer Sound Board Console Desk System digital multi-effect processor, offering a comprehensive suite of editable digital effects perfect for enhancing your mix, whether adding depth to a speaking engagement or breathing new color and atmosphere into a live performance.

• Ultra-thin Design: 8 channel single tone, channel 3 segment equalization, one set of auxiliary transmission, one set of effect transmission, built-in digital effector, 60mm precision push-pull potentiometer.
• Lengthened Stroke Pusher Slide Rail: The design of lengthened stroke pusher slide rail enables more accurate tuning, high quality pusher, longer service life, moderate damping and higher quality when used.
• High Quality Socket Technology: More stable transmission, better sound quality and lower distortion rate.
• USB /SD Card Play with Screen: Compatible with USB/TF Card Play, with Music Selection Function.
• Good Stage Helper: Compared with the same price, professional-grade mixer has more complete functions and higher quality.

User questions & answers

Question:	can you use this as an audio interface? for example, can you record with it
Answer:	I don't know the RPM's, but the speeds are quite appropriate for mixing cementitious mixtures like thinset, joint compound and concrete.
Question:	How do i change the language to english
Answer:	The mixer shaft is 23 inches long installed. I am not certain that this would work for mixing grain as it would be very fine. Although it does have variable speeds. I used it with 5 gallon buckets to mix cement to skim coat my drive. It is powerful and easy to handle.
Question:	How do the sliders feel? Are do they offer a little resistance or are they kinda easy to move accidentally
Answer:	Yea
Question:	What’s the difference between main and room? Can you operate them separately, such as vol, fix, and eq
Answer:	As high as you want. Makes huge loads.

Product features

Professional 8 Channel Stage Pure Mixer

• Personalized function design, portable console design, accurate control of every sound quality.
• Classic professional audio equipment provides high-quality sound for various mixing environments, and nice customized sound effects to create your own singing voice.

HUMANIZED DESIGN

• 8-channel audio input
• Bluetooth/USB playback
• 48V phantom power supply
• Real-time monitoring effect
• Independent adjustment of high, mid and low
• Perform sound processing on music and vocals at any time

USB Playback Function

Support audio devices with USB interface, lossless sound quality, read and play instantly.

Wireless Bluetooth Connection

Press the switch key to switch to Bluetooth mode, turn on the electronic device with Bluetooth function, and search for the link.

Mono + Stereo Input

Multi-channel balanced and unbalanced input interface, which can connect various microphones and musical instruments.

Professional 3-band Balance Adjustment

Each mono channel has a 3-band equalizer, and the high, mid and low are adjusted independently.

Powerful & Rich Compatibility

It is widely compatible with wireless microphones/wired microphones/electronic organs/guitars/pure post stage power amplifiers/card package power amplifiers/computers and other equipment.

Blu-ray LCD Screen

The blue backlit LCD screen can grasp all work dynamics in real time.

Powerful MP3 operation interface, you can control the playback/pause/selection of the audio source at will.

Wide range of applications

Used for stage performances, bands, conference rooms, sound engineers, bars and other occasions.

Product description

• Premium ultra-low noise analog mixer with optional battery operation
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic ''British'' 3-band EQs for warm and musical sound
• Optional battery operation (with 9 V alkaline batteries) allows for mobile operation
• 4 balanced, high-headroom stereo inputs with 3 additional mic inputs

User questions & answers

Question:	how to plug into speakers
Answer:	It's not a "powered mixer" you have to plug the main output into an amp then the speakers into the amp. Or plug the main output into "powered speakers" like krk rokit 8's.
Question:	How much time does it work on batteries
Answer:	The manual that comes with it says 4 hours. Are there any owners who have real world experience with battery life?
Question:	This mixer can hold up to 4 mics, correct? I'm looking for something to use in group discussions
Answer:	This sound board has 5 XLR phantom powered inputs. Therefore, you may have up to five microphones using this type of input cable. In addition to this, you have 1/4" cable inputs, and RCA inputs for extra mic's, or sound from other devices, such as your computer or a CD player. For these reasons, this board makes a great tool for doing group discussions.
Question:	what is the difference between the 1002b and the
Answer:	Quite a bit of difference. The amount of XLR connections available, the 1002B has 5 compared to the 2 available on the 1002. There are 2 monitor/fx sends on the 1002B as to 1 on the 1002. All of the channels have EQ on the 1002B, the 1002 does not. The 1002B uses slider faders for the channels as compared to rotary faders on the 1002. The 1002B utilizes a power switch to turn the mixer on/off, the 1002 does not have a power switch. The 1002B offers the option of using batteries to power the mixer for portable use, not the 1002. I could not find anything about the 1002 shipping with rack ear adapters. The 1002B came with rack ears making installation in my gear rack a breeze. All of these observations are from me looking at the images on the Behringer website for the 1002 as I do not own one. I do own the 1002B. Hope this helps with your decision.

Product features

Behringer Xenyx 1002B Premium 10-Input 2-Bus Mixer with XENYX Preamps

• Premium ultra-low noise analog mixer with optional battery operation
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic ''British'' 3-band EQs for warm and musical sound
• Optional battery operation (with 9 V alkaline batteries) allows for mobile operation
• 4 balanced, high-headroom stereo inputs with 3 additional mic inputs
• One FX send and one Monitor send per channel for external FX devices and monitor applications
• Clip LEDs on all channels and dedicated inserts on all mono channels
• Switchable phantom power for condenser microphones
• Long-wearing 60-mm logarithmic-taper master fader and sealed rotary controls
• External power supply for noise-free audio and superior transient response

XENYX 1002B

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb XENYX 1002B, the BEHRINGER mixer with everything you need to give an intimate setting incredible sound. The ultra-compact XENYX 1002B mixer’s 10 Inputs (2 mic channels, 4 stereo channels with 3 extra mic inputs) allow you to effortlessly achieve premium-quality sound.

Sonically Superior Mic Preamps

The XENYX 1002B gets its name from our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology. XENYX preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the XENYX 1002B provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Field Operation

Its compact size and flexible input scheme also make the XENYX 1002B the natural choice of sports announcers for calling play-by-play game action. Likewise, radio and TV reporters especially like the XENYX 1002B for its ease-of-use, remarkable fidelity and rugged reliability. And the 9 V battery option allows newscasters and correspondents to use the 1002B in remote locations where power is hard to come by.

Product description

Mix Series Compact Mixers are reliably rugged, with the proven quality you expect from Mackie, the world leader in compact mixer design. With Mackie preamps and proven high‐headroom, low‐noise design, Mix Series mixers sound great and maintain audio quality from any source. Plus, with their rugged metal chassis and high‐quality components throughout, they are a solid investment in reliability. An amazing value, Mix delivers a straightforward feature set that's easy to use and the sound quality you need in rugged designs built to last. Plus, wouldn't you rather mix on a Mackie?

• 8-channel compact mixer with proven high-headroom, low-noise performance
• 2 mic/line inputs with studio-level audio quality, pan, level and overload indication and phantom power for studio condenser mics
• 2 stereo 1/4" line inputs
• 3-band EQ on all channels with clean, precise tone shaping
• 1 aux send with stereo 1/4'' returns

User questions & answers

Question:	Can i use this mixer connect to speaker , subwoofer and dj controller together
Answer:	I’m assuming you would go with your DJ controller into this unit, then you could send the out to the sub and PA speaker. You might also be able to run a separate aux out to the sub and just give it more when you need to. Personally I would get a mackie 802 before I buy this.
Question:	can i hook this to my crown power amp
Answer:	Yes, I hook mine up to 2 crown Amps. I run them bridged made use one for the left channel and one for the right channel.
Question:	Can this be used for live performance with output to PA and monitor ( one vocal and acoustic guitar
Answer:	Yes you can. You have stereo monitor outs (called Control Room) as well as main outs, and they have independent controls. The control room outs share the same level as the HEADPHONES out, though. You do have an extra AUX out that can serve as a different send to a monitor, but it is mono.
Question:	Is there a USB output
Answer:	No USB Output on this mixer. Thank you, Sam Ash Direct

Product features

Mix8

The Mix8 8-channel compact mixer is reliably rugged, with the proven quality you expect from Mackie, the world leader in compact mixer design. Perfect for straightforward applications with minimal input needs, Mix8 sounds great and maintains audio quality from any source.

With a rugged metal chassis and high-quality components throughout, Mix8 is a solid investment in reliability.

An amazing value, Mix8 is extremely easy to use and delivers the sound quality you need in a rugged design built to last. Plus, wouldn’t you rather mix on a Mackie? Don’t sacrifice – choose the Mackie Mix Series.

Product description

For a more precise control and enhancement of your sound, XU models of the MG Series come equipped with a suite of Yamaha's renowned SPX effects. Featuring high-resolution Chorus, Flanger, Distortions, Reverb and Delay, all with editable parameters, these are the same multieffects processors used on Yamaha's high-end mixing consoles, giving you the tools you need to elevate your mixes to a higher plane. Yamaha has always strived to provide sound engineers with the purest possible signal instead of added processing or color to give it a "signature" sound, and the MG Series is no exception. Embracing this philosophy of transparent sound, these mixing consoles deliver a level of sonic purity and sound quality that is unmatched in their class.

• 10 channel mixer with USB and SPX digital effects
• Featuring studio grade discrete class A D PRE amps with inverted Darlington circuit providing fat, natural sounding bass and smooth, soaring highs
• 3 band EQ and high pass filters give you maximum control and eliminate unwanted noise, resulting in a cleaner mix
• 1 knob compressors allow easy control resulting in livelier guitars, punchier bass lines, a tighter snare and a cleaner vocal sound
• MG Series mixers feature a rugged, impact resistant, powder coated metal chassis; Equivalent input noise 128 dBu, residual output noise 102 dBu
• Note: Please refer to the user manual before use
• Dimensions(W×H×D): 244 millimeter x 71 millimeter x 294 millimeter (9.6x2.8x11.6 inches)

User questions & answers

Question:	Can I add echo and reverb at to the mic
Answer:	Hi. Any of the onboard effects will work with the with Mic channels. One effect at a time, though.
Question:	Is this mixer capable of "mix minus" configuration? If so how is it done? I cant seem to get it to produce any audio from the "fx send" port
Answer:	been trying to determine this for my own setup. thus far it seems No as the AUX is post fader. im trying to isolate the mic on the FX send and have it removed from the main mix.. nothing seems to allow this to happen. i can get the FX send to work but if the usb and the FX send are connected to the same source, both signals carry the mic audio...
Question:	Can this do multitrack recording
Answer:	This is a mixer and not any type of recording device. This operates on USB and does not have any recording capability built-in. This is used to record multiple sources at one time and make that into one Stereo/Mono audio output that can be used with a recording software, streaming software, or even a live speaker system. You can record the main output via computer, but even then, this will all be one audio stream, not one for each separate channel.
Question:	who made it
Answer:	Probably someone who works for Yamaha.

Product features

Yamaha MG Series Mixers

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivaled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering a level of sound quality and reliability unrivaled in its class.

D-PRE (Discrete Class-A Mic Preamps)

This is where it all starts. Everything you do as a sound engineer is dependent on the quality of your preamps, which determines the direction your mix will take, and ultimately how good it is going to sound. MG Series mixing consoles feature Yamaha's studio-grade discrete class-A D-PRE preamps, which utilize an inverted Darlington circuit comprising two cascading transistors in a configuration that provides more power with lower impedance.

EQ and High-pass Filters

There's nothing more useful than reliable equalization when you need nuanced management of your tone. The MG Series benefits from Yamaha's unparalleled experience in designing pro audio gear, featuring 3-band equalizers on all mono channels for precise control of your sound. High-pass filter allows you to eliminate unwanted low-frequency noise, for a smoother, cleaner mix.

1-Knob Compressors

Compression plays an essential role in just about any recording or sound reinforcement environment by altering the level of dynamics of an audio signal when you need livelier guitars, punchier bass lines, a tighter snare, or a cleaner vocal sound. However, it can take countless hours to master the complexities of even the most basic outboard compression units and use them effectively.

Built-in SPX Digital Effects

For musical and non-musical applications, effects processing adds polish and professionalism to the mix. The MG X / XU models feature Yamaha's SPX digital multi-effect processor, offering a comprehensive suite of editable digital effects perfect for enhancing your mix, whether adding depth to a speaking engagement or breathing new color and atmosphere into a live performance.

High Quality Sound Op-amp

The head amp determines sound quality, and op-amp integrated circuits are one of the most important parts in the head amp circuit. MG Series mixers feature new, high-quality, custommade MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. We worked directly with the semiconductor manufacturer to focus on sound quality first.

• ♫ Stereo / mono simple switching-◆ Stereo version ◆: Male and male connectors of 1 / 4-inch TRS stereo audio cable must be used for input and output connections (1 / 4-inch male-to-male stereo audio cable (TRS cable) is Key point) then press the toggle key. ◆ Mono version ◆: Mix 8 mono signal inputs into 1 mono signal output (1 / 4-inch TS male-to-male connector for input and output connection). TRS / TS cables are not included in the packaging
• ♫ DC 5V power supply-DC 5V power supply-◆ This product uses the latest DC 5V power supply mode, so no longer restricts the application scenarios. Note: Please use an external power supply with CE or UL certification, and stay away from the interference source, otherwise it will cause noise and other undesirable interference to the product.
• ♫ Simple Control-◆ The audio mixer collects sound from many different sources (microphone, guitar, bass and keyboard) into a monitoring position for monitoring or routing. Each channel on the linear mixer has an independent volume control, independent input plugs and volume control for each channel, and a single output from an amplifier.
• ♫ Simplified setup versatility-◆ The mixer is ideal for multi-keyboard devices and recording, where multiple channels need to be mixed into one audio track. Great for your keyboard, small stage setup, drum set or submix, and then the main mix. Mixer: Modern design looks great on any desktop, with large controls that are easy to use and small in size, avoiding tangling wires, clothes, etc.
• ♫ Low-noise 8-channel line mixer-◆ Mini audio mixer produces the highest sound quality at all output levels, has ultra-low noise operability, and provides excellent audio performance. Distortion-free and easy to set up, ideal for quickly mixing 8 line-level signals without complexity. The 8-channel mixer produces the highest signal quality with the highest signal integrity, even at the highest levels.

User questions & answers

Question:	Balanced or unbalanced inputs
Answer:	Limited one year warranty for parts and labor.
Question:	How long is the usb wire that it comes with
Answer:	Yes it can be. You can set each channel to be a independent mic in to line out. You will need to take the lid off and change the jumpers on each channel. thanks!
Question:	Does this provide phantom power for condenser mikes
Answer:	No, it does not produce speaker level. It is a mic/line mixer. Mic and/or line level in, with mic or line level out.
Question:	I see contrary remarks about microphone use. Can I plug a couple of mics and guitar or not
Answer:	No it only comes with the mixing blade. It is the best tool I have ever used to mix grout and mortar.

Product features

Moukey Ultra Low-Noise 8-Channel Line Mixer

Moukey MAMX3 (Eight input channels) for you to blend various audio sources or instruments down into one channel. You can mix guitar, electronic drum, MP3 player, phone music together then enjoy the reverb you’ve made. No hum hissing and audible noise added into the system, pretty transparent, fluent sound streaming, 8 channels stereo mixer give the nice and pleasure experiences when you are using.

The audio mixer 8 channel has four 1/4 TRS inputs along with a 1/4 TRS output, the channels are stereo not mono. Six volume knobs of the stereo mixer to adjust each input level.

Please add a ground loop noise isolator on the line from your computer and into the mixer if there is humming buzzing noise when mixing the computer and other device audio

Product Application

Our mixer is suitable for mixing most electronic musical instrument microphones. Electronic musical instruments such as electronic guitars, electronic drums, electric pianos, etc. The scope of application is wide and unlimited.

New Operating Mode

Each channel has added switching buttons, making switching between mono and stereo audio input more convenient and intuitive.

New Power Supply Mode

DC 5V power supply mode, which is convenient for customers to use in multiple occasions. Such as your laptop, desktop computer, charger adapter, power strip and power bank. As long as the voltage is DC5V, the current above 500mA can provide power for our products.

Product description

Specifications:

Color: Black

Material: Metal

Power adapter:

US Input: 100-240V AC 50/60Hz 0.23A

Output: ±15V DC

 +48V DC  

Item size: Approx. 40 * 34 * 4cm / 15.7 * 13.4 * 1.6in

Item weight: 3.7kg / 8.2Lb

Package size: 45 * 42 * 10cm / 17.7 * 16.5 * 3.9in

Package weight: 4.2kg / 9.3Lb



Package List:

1 * Mixer Console

1 * Power Adapter (US)

1 * User Manual (English)   

• 8 channels Mixer with XLR and Line inputs, every channel has PEL switch.
• With USB MP3 input interface and LCD, headset monitoring, recording, and stereo equipments output jacks.
• Each channel has Aux, Effect, Gain, Channel fader knobs and Peak indicator.
• Return and Send jacks to connect kinds of effects from outside.
• Great for recording DJ stage Karaoke to have a perfect sound effects.

User questions & answers

Question:	The output is very low and hardly drives my amp. What can I do
Answer:	Dear, First you press the music mode button, then press the system settings to enter, after the language is selected, select English, then press Enter, all will become English language. If you really don't know how to change the language to English, you can send me an email and I will send you a video to teach you how to operate. Thank you~
Question:	Are the Effects Digital
Answer:	Really good and easy to work
Question:	Can I run seven drums mics click tracks and in ears through this
Answer:	MAIN is the main output, ROOM is the meaning of the control room. suppose you have a recording room, then you need a control room. the person who controls the mixer is sitting in the control room to record. he needs to hear the sound of the monitor box, so you can use CTRL OUT to connect the monitor box to control its volume. Vol, fix, and eq cannot be operated separately. For independent control, a mixer with grouping is required.
Question:	Can i use this as a audio interface to record live music
Answer:	Height 1-3/4" Width 19" (standard for rack mounting) Depth 5"

Product description

Professional Grade Mixing with a Small Footprint

The ZEPHYR ZMX122FX is an 8-channel, 2-bus mixer with all the essential inputs, outputs, and EQ for solo gigs and multimedia studios. It features four mono channels with microphone inputs (including Phantom Power), balanced TRS inputs with three-band EQs, plus two stereo channels, each with two balanced TRS inputs. There's even a two-track input/output for added connectivity to external media players and recorders. In a nutshell, the ZMX122FX is the perfect compact take-anywhere professional mixer.



The Ins

The ZMX122FX is the ideal mixer for quick, hassle-free easy setup. Not only can you plug dynamic, condenser, and wireless microphones into the first four channels, but you also get two stereo channel inputs for keyboards, drum machines, and other instruments within your live arsenal. You can even plug in your MP3 player, CD players, or audio from a DVD player into the CD/TAPE input and hook-up to external recorders via the 2-track output.



The Outs

Whatever your situation demands, relax in the knowledge that ZMX122FX’s arsenal of inputs and outputs accommodates any scenario with ease. As well as the main stereo outputs, ZMX122FX also includes a dedicated control room output to send to a second pair of reference monitors. It’s easy to see why so many live performers and multimedia specialists choose the ZMX122FX as the audio central command for their live performances, home studios, or video suites.



256 Onboard Effects

Regardless of what you're mixing, give your mix a professional edge with 256 onboard 24-bit DSP effects designed in partnership with Alesis. The ZMX122FX offers 16 variations of 16 professional Alesis effects from which to build, tweak, and dial in your sound. There's even a footswitch input so you can bypass all effects hands-free (footswitch not included).

• A Mixer For Any Occasion: Sixteen total inputs with phantom powered XLR inputs on channels 1-4 - perfect for musicians looking for a compact mixing console for studio, podcast or live sound use
• Superior Sound Quality: High headroom circuitry offering extra dynamic range and ultra-low-noise for the best performance from your studio microphones
• Tweak Your Sound: Warm, natural three-band EQ on all channels for adding studio grade processing to all inputs including your dynamic, ribbon and condenser microphone signals
• The Ins & Outs: 1/4” Main, Control Room, Headphone & Aux outputs for flexible signal routing; Four mic input channels with XLR and balanced line inputs; two additional stereo input channels
• Studio Quality Built In Effects: 256 onboard 24-bit DSP effects from Alesis including reverb, delay, chorus and phaser; Footswitch input for effects on/off (footswitch sold separately)

User questions & answers

Question:	How do i eq from rca inputs? rca inputs/outputs doesn't have eq settings like the other channels have
Answer:	ALTO support here! The RCA aux inputs don't have the option of EQing. If you prefer EQing the audio, I would recommend using a cable that has 2 1/4" connections so you can plug your audio source to channel 5/6. This will allow you to play your stereo signal through a channel on the mixer with EQ options. If you have any other questions, please feel free to call or email us using the contact information on altoproaudio.com/contact.
Question:	How to remove aux/Channel 2/3 or 4/5 audio input from main mix out but leave mic 'phone monitoring and output enabled
Answer:	I have a different Model of Mixer but I'll try although I'm not clear about the meaning of your question. The Mic Channel (1) and Line Input Channels (2/3 and 4/5) are always assigned to the Main Output and the Headphones. The AUX Inputs (L and R Phonos) can be sent to the Headphones and The Main Mix with the switches above the Headphone Volume Control. Since I don't know what result you're trying to achieve, this may not be the reply you want, sorry.
Question:	can i connect passive speakers to this mixer? would it work as speaker amp
Answer:	The ZMX52 5-channel will not work as a speaker amp. Nor can you connect passive speakers to this mixer .
Question:	I have separate dj & karaoke setups & need a sound mixer (fx) exclusively for my karaoke player & mic's to powered speakers. is this a best option
Answer:	I have used this mixer for that exact application & it works great. I suggest taking the music into a pair of the channels that could be used for mics. I prefer this because you get the three levels of EQ when you do that. These controls work very well.

Product features

Alto Professional ZMX122FX

The ZMX122FX packs an enormous amount of features into a very compact space, but we took a no-compromise approach where the purity of your mix is concerned. This compact mixer brings the same standard of quality to your performances as our top-of-the-line models. The Alto Pro ZMX122FX has professional-grade mixing features with a go-anywhere attitude.

Professional Mixing Features

The ZMX122FX is an eight-channel, two-bus mixer with all the essential inputs, outputs, and EQ for any and all live shows. It features 4 XLR inputs, 2 aux sends per-channel, a three-band EQ and more!

Built-in FX

Choose from room and space delays, small and large hall acoustics, plate and spring reverbs, flangers, chorus effects and more! The ZMX122FX offers 16 effects to build, tweak, and dial in your sound.

Visualize Your Mix

Blue, red, yellow and white pots are easy to identify in dim lighting. The bright LED indicators for output level, peak, and phantom power assist in making sure that visual cues compliment what you're hearing.

Versatile Inputs and Outputs

The ZMX122FX is the audio swiss army knife you need. Plug in microphones, keyboards, drum machines, MP3 or CD players, or audio from a DVD player. Choose the ZMX122FX as the center of your live performances

Features

16 total inputs including XLR jacks w/ phantom power on ch. 1-4.

4 mic input channels with gold-plated XLR and balanced line inputs.

Two stereo input channels with balanced TRS jacks.

2 aux sends per channel for external effects and monitoring.

2-bus design with Main and Control Room 1/4” stereo outputs.