11 best mixer amplifier yamaha

Product description

Power. Portability. Performance. The EMX Series features all-in-one mixer amplifiers with impressive power output and a wide selection of performance features like Output EQ, Feedback Suppression and SPX Effects.

• The EMX5 is both a mixer and a power amplifier
• Lightweight and portable design make it very easy to carry and particularly useful for various events
• First-time users can easily configure their own sound reinforcement system
• Features include; Output EQ, Feedback Suppression and SPX Effects
• Power amplifier provides 2x 630W@4Ω

User questions & answers

Question:	Can i plug in a 1000 watts passive speakers on this
Answer:	It truly depends on what you mean by thousand watt speakers. if that means thousand watt peak then you can easily run those speakers, if it is thousand watt continuous the EMX7 is going to be able to run them just not at extremely high volumes likely.
Question:	I'm setting up a Karaoke system for the wife. Is this a good add on
Answer:	I have no knowledge about karaoke specifically; but as powered mixers go, the EMX2 is an extremely good piece of equipment.
Question:	The emx5 has no gain knob, how are you going to adjust the input signal
Answer:	There is a overall gain on each of the two input areas. You will need to adjust the microphone input and the music input to what you like then adjust the overall gain on the far right to gain more volume.
Question:	Can I connect active (powered) speakers to this unit
Answer:	Only to the passive outputs on the front panel. DO NOT connect powered speakers to the powered outputs on the back of the mixer. If you're not 100% sure you know what you're doing, consult someone who dose.

Product features

Yamaha EMX Mixers

The new EMX Mixers were designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level. Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.

Robust, Rugged Construction

The EMX Mixers benefit from a robust and portable design with a rugged, impact-resistant, powder-coated metal chassis geared towards extended operation and road usage. Large handles on the front and back of the enclosure make it extremely portable, and also help to protect knobs and terminals on the surface of the chassis from impact or pressure during transport.

The lightweight body also features handles for a superior level of portability that will benefit anyone setting up a PA for applications where time is a consideration.

Live Bands, DJ, Public Speaking

The flexible connectivity allows you to use up to 4 microphones for singing along with musical instruments, or speaking/ making announcements along with BGM or recorded audio from a portable playback device. The unit also comes equipped with Phantom Power and high-impedance input capability allowing you to use high-performance condenser microphones or connect guitars directly without any external gear. And because the EMX is also an amplifier, you can easily connect passive speakers to complete your sound system, or even add a Yamaha DXS Series Powered sub-woofer via a single connection, for configuring a PA system for applications that require a more prominent bass performance, such as a DJ event in a small club or outdoor venue.

Product description

The Yamaha MA2030 compact power amplifier brings years of experience and success in the commercial audio field together in a compact but powerful amplifier designed specifically for installations. The entire unit is built into a rugged metal chassis for outstanding durability. The MA2030 combines a familiar, unassuming construction with efficient, flexible performance. The MA2030 offers 2-channel mixing capability with source EQ (Bass/Treble), as well as a number of the same acclaimed Yamaha's state-of-the-art DSP technologies featured in our top of the line professional audio gear. Whether providing background music for a cafe or restaurant, or powering a conference room or any number of applications requiring a microphone, the MA2030 provides you with a compact, yet powerful tool to help shape your ideal commercial sound environment. The MA2030 Mixer Amplifier interface has been specifically designed for effortless operation. A layout that gives priority to the frequently used output volume knob while other controls are visually subdued, for example, significantly enhances control efficiency in normal day-to-day operation. And there’s no need for computers or complex programming procedures for installation or operation. After a quick, easy setup procedure that requires no special knowledge or skill, the system is ready to deliver outstanding sound in a wide range of applications. 3 stereo inputs and 2 microphone inputs (XLR combo jack and Euroblock) provide plenty of input capacity for small installations. Features that contribute to high quality music playback and microphone use include a feedback suppressor that effectively stops feedback that can occur when a microphone picks up sound from the system’s speakers, automatic ducking that smoothly adjusts the background program level when microphone input is detected, and automatic leveling that keeps overall volume constant regardless of changes in source level.

• The MA2030 has 3 stereo inputs and 2 microphone inputs (XLR combo jack and Euroblock) that provide plenty of input capacity for small installations. Whether providing background music for a cafe or restaurant, or powering a conference room or any number of applications requiring a microphone, the MA2030 provides you with a compact, yet powerful tool to help shape your ideal commercial sound environment.
• Supports low impedance and high impedance speaker systems without the need for additional transformers or other hardware that can take up valuable installation space.
• Advanced features that contribute to high quality music playback and microphone use include a feedback suppressor that effectively stops feedback that can occur when a microphone picks up sound from the system’s speakers, automatic ducking that smoothly adjusts the background program level when microphone input is detected, and automatic leveling that keeps overall volume constant regardless of changes in source level.
• Bass and treble EQ controls on the front panel of the MA2030 are convenient for adjusting the low and high frequency contours of the stereo input source. The source EQ also includes an enhancer function that adds harmonics as necessary to compensate for source material that is deficient in bass or high-end response.
• The entire unit is built into a rugged metal chassis for outstanding durability.

Product description

No amp, no cabinet, no pedals -- just a guitar or bass, some headphones, and SessionCake SC-02 are all you need for intensive individual practice or a full-blown rehearsal or jam session. Connect up to 8 SessionCakes together to create a fully featured mixing system where everyone can create the mix that works for them. Portable, lightweight, battery powered, the SC-02 also features an AUX-in port that allows you to use an iOS device as an effector, or play along with your music library. SessionCake SC-02 adds vocalists, keyboardists, and digital instruments to the mix with XLR and stereo left (mono) and right (Hi-Z) inputs, as well as a GAIN (MIC) control for dynamic microphones.

• Connect up to 8 SessionCakes Together
• Portable, Lightweight and Battery-Powered
• Play Along with Music Using Aux Input
• XLR and 1/4" Mono or Stereo Inputs
• Gain Control for Microphones

Product description

No amp, no cabinet, no pedals -- just a guitar or bass, some headphones, and SessionCake SC-01 are all you need for intensive individual practice or a full-blown rehearsal or jam session. Connect up to 8 SessionCakes together to create a fully featured mixing system where everyone can create the mix that works for them. Portable, lightweight, battery powered, and equipped with a Hi-Z input, the SC-01 also features an AUX-in port that allows you to use an iOS device as an effector, or play along with your music library.

• Connect up to 8 SessionCakes Together
• Portable, Lightweight and Battery-Powered
• Play Along with Music Using Aux Input

Product description

Offering a unique blend of intelligent processing, high output power, and a lightweight, yet durable design, the PX Series meets the requirements of a vast range of SR and installation environments.

• 50% lighter than previous Yamaha P Series Power Amplifiers
• Onboard Signal Processing including D-Contour
• Features include; Config Wizard, Panel Lock, Event Logging
• 2x 500W@4Ω

User questions & answers

Question:	If i use this in a home theater setup, will it power on and off on its own, or will i have to do it manually every time
Answer:	Yes, the bike seat suitable for exercise bikes.
Question:	Can this be bi-amped
Answer:	The bike seat fits for a mongoose bike
Question:	What’s total harmonic Distortion
Answer:	The bike seat suitable for mountain biking for long distances
Question:	Is the amp bridgeable to single channel
Answer:	I tightened the screws very tightly, and there was no loosening of the screws after a week of use.

Product description

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.



With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

• 6 channel stand-alone mixer with onboard SPX digital effects (no USB); +48V phantom power
• Featuring studio grade discrete class A D PRE amps with inverted Darlington circuit providing fat, natural sounding bass and smooth, soaring highs
• 3 band EQ and high pass filters give you maximum control and eliminate unwanted noise, resulting in a cleaner mix
• 1 Knob compressors allow easy control resulting in livelier guitars, punchier bass lines, a tighter snare and a cleaner vocal sound
• MG Series mixers feature a rugged, impact resistant, powder coated metal chassis; LED level metering

User questions & answers

Question:	Can i connect mg06x-6 to tv
Answer:	here's one: http://www.guitarcenter.com/Hosa/Stereo-1-4-Inch-Male-TRS-to-Dual-Male-RCA-Insert-Cable.gc
Question:	Can i connect its out to irig pre (phone-audio interface) which ultimately connected to phones for recording over iphone/ipads
Answer:	This mixer with its quality mic preamps (real ones, with plenty of adjustable gain) , EQ, channel output volume, etc. is far superior to the iRig Pre. I tried the iRig Pre (and reviewed it) and didn't like it. To emulate the iRig Pre connections, get a TRRS (male) adapter you plug into your phone/tablet that breaks out separate speaker 1/8" TRS (female) and mic 1/8" TRS (female) connectors. You could use either the XLR or the 1/4" outputs of the mixer as input to the mic 1 /8" TRS connector on the adapter. Unlike the iRig Pre, with a mixer like this you have the option of listening to the realtime output of the mixer from its headphone jack or plug your headphones into the speaker 1/8" (female) connector on the adapter to hear it how the phone/ tablet is recording it (which can be time-delayed making it difficult to speak live while listening to non-realtime audio).
Question:	Are the 1/4 inch outputs TRS for balanced signal to another TRS input? I'm planning on using this as a simple mixer for input to a Bose L1 Compact
Answer:	The outputs are Stereo outputs, both L and R. (shown on the blue areas of image)
Question:	Can headphones and stereo out be be controlled independently? I want to listen to either headphones OR speakers, not both at once
Answer:	On the MG10XU there are two volumes controls. Stereo out and Monitor/Headphones out. I can't tell if this has both knobs or not. You can check the manual for the technical diagram.

Product features

Yamaha MG Series Mixers

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivaled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering a level of sound quality and reliability unrivaled in its class.

D-PRE (Discrete Class-A Mic Preamps)

This is where it all starts. Everything you do as a sound engineer is dependent on the quality of your preamps, which determines the direction your mix will take, and ultimately how good it is going to sound. MG Series mixing consoles feature Yamaha's studio-grade discrete class-A D-PRE preamps, which utilize an inverted Darlington circuit comprising two cascading transistors in a configuration that provides more power with lower impedance.

EQ and High-pass Filters

There's nothing more useful than reliable equalization when you need nuanced management of your tone. The MG Series benefits from Yamaha's unparalleled experience in designing pro audio gear, featuring 3-band equalizers on all mono channels for precise control of your sound. High-pass filter allows you to eliminate unwanted low-frequency noise, for a smoother, cleaner mix.

1-Knob Compressors

Compression plays an essential role in just about any recording or sound reinforcement environment by altering the level of dynamics of an audio signal when you need livelier guitars, punchier bass lines, a tighter snare, or a cleaner vocal sound. However, it can take countless hours to master the complexities of even the most basic outboard compression units and use them effectively.

Built-in SPX Digital Effects (MG06X)

For musical and non-musical applications, effects processing adds polish and professionalism to the mix. The MG06X features Yamaha's SPX digital multi-effect processor, offering a comprehensive suite of editable digital effects perfect for enhancing your mix, whether adding depth to a speaking engagement or breathing new color and atmosphere into a live performance.

High Quality Sound Op-amp

The head amp determines sound quality, and op-amp integrated circuits are one of the most important parts in the head amp circuit. MG Series mixers feature new, high-quality, custommade MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. We worked directly with the semiconductor manufacturer to focus on sound quality first.

Product description

The yamaha dbr10 10" active speaker can withstand a whopping 129db spl. Using the latest dsp, yamaha applied their proprietary fir-x tuning to optimize the sound and protection algorithms of the dbr10, providing you with plenty of muscle, despite this active speaker's rather diminutive size. Incredibly versatile, you can use the dbr10 as a great-sounding main speaker or as a high-performance floor monitor with a quick flick of the yamaha dbr10 10" active speaker's d-contour switch. A switchable highpass filter also makes it easy for you to add a subwoofer to your rig.

• Fir-x tuning delivers excellent sound quality with high resolution and a smooth frequency response
• D-contour optimizes the dbr10 for main speaker or floor monitor use
• Onboard mixer lets you select either a direct output or a mixed output
• Comprehensive inputs for mixer, musical instrument, or media players
• Amplifier and power supply design provides powerful output from a compact speaker, dsp-controlled protection functionality promotes optimum reliability

Product description

Yamaha MG12XU 12-Input Channel Analog 4-Bus Mixer with Effects For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivaled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivaled in its class.

• "D-PRE" Mic preamps with an inverted Darlington circuit
• Metal chassis with XLR balanced outputs and internal universal power supply
• Built-in SPX digital effects, bi-directional USB, one-knob compressors

User questions & answers

Question:	Is it possibly to set up different individual monitors with this mixer? I have noticed that this comes with no aux out on the back
Answer:	The wall adapter for the mixer is only listed at 120 Volts so you would likely need a power converter. Since the power input on the mixer itself is 12 Volts DC you could probably just by a new Euro wall adapter.
Question:	The audio can cut when i open mic
Answer:	Not as shipped. This runs off a wall transformer that supplies 12 volts to it via 3.5mm barrel jack. If you can source your own 220 to 12v source then you would be able to use that.
Question:	can I play with 4 speakers qsc cp12inch and subwoofer
Answer:	Hard to say for sure because I don't know what kind of microphone you have. It's likely to be a condenser mic, in which case you need phantom power, which the board has. Condenser mics usually don't have their own power source, which is what phantom power provides. However it's possible that whatever speaker you are going to plug this into will have phantom power- in which case you wouldn't need the board for that feature (turn the boards phantom power off). You also need to double check your connections to make sure you can physically go from mic to board from board to speaker(s).
Question:	would 4 xlr mics all be blended out to my external speakers? does the mixer blend it togther then the sound
Answer:	This is an incredible audio tool , bought as a gift for a dj friend & he totally loves it It’s compact , does so much Recommend!!!

Product description

Mixer amp with 2 stereo inputs and 6 mic/line inputs. Output EQ and Crossover, Compressor, Reverb, and more. Uses any DCP Series wall mount controllers for remote control. Lo-Z: 120 watts x 2 channels; Hi-Z: 120 watts x 2 channels, or 200 watts x 1

Product description

Yamaha DXR Series Loudspeaker sever since we first started developing professional audio equipment in the 1960s, we've made it our goal to stay at the forefront of the technology curve. The DXR Series is comprised of four full-range models perfectly suited for front-of-house sound, monitors, simple amplification, rigged applications and more. Combining the series with our newly designed DXS subwoofers will further elevate your system's performance, giving you versatile control of its thunderous bottom end. DXR10 - 10 2-way Active Loudspeaker Portable, yet capable of producing an astonishing 131 dB SPL, the DXR10s compact, functional design makes it ideal for a wide range of applications. Whether comprising a compact SR system or providing simple vocal / instrument amplification, the onboard mixer eliminates the need for an external mixer - without compromising sound quality and power. Features: Speaker type 10" 2-way, Bi-amp powered speaker, Bass-reflex type Frequency Range (-10dB) 56Hz - 20kHz Ultra-Precise 48Bit DSP Processing for High-Definition Sound Intelligent Dynamic Control for Consistent Clarity at Any Output Level Extensive DSP Protection Functions for Maximum Output High-Efficiency 1100W Class-D Amplifiers Intelligent Onboard 3-Channel Mixer DXR Series Transducers Meticulously Selected and Thoroughly Customized to Deliver Ultimate Performance Durable, Compact ABS Enclosures Symmetrical Enclosure Design for Mirror-Mode Floor Monitoring Dual-Angle Pole Mount Socket Rigging Points for Standard Eye-Bolts and Optional U-Brackets

• 1100W of class D power
• DSP controlled for maximum output and protection
• Great as a main speaker or as a floor monitor

Product description

Compact and light enough to carry by hand, STAGEPAS 600BT is an all in one PA system that you can take literally anywhere. The two lightweight speakers and a detachable mixer, along with a pair of speaker cables and a power cord combine into a high performance, compact package that provides remarkable portability. With its intuitive, simple design STAGEPAS 600BT can be set up and ready to go in seconds. Even users with no PA operation experience will be able to produce high-quality sound in under a minute. Flexible enough to be used in a truly impressive range of environment and applications, STAGEPAS 600BT can be set up in a variety of PA and monitoring configurations.

• Ultimate portability: compact and light enough to carry by hand
• Fast and easy set-up: STAGEPAS 600BT can be setup and ready to perform in a matter of seconds
• A PA for any occasion: cover a wide range of environments and applications
• Bluetooth connectivity: allows wireless streaming from smartphones and tablets
• Intelligent DSP: one button operation for Intelligent feedback Suppressor

User questions & answers

Question:	What kind of tripod can you use for the speakers? None are recommended
Answer:	I have a Pyle speaker stand that was recommended.
Question:	Would the 600 bt be loud enough for use in a 84 ft l x 50 ft w gymnasium for a dance team competition
Answer:	Yes I think it would be no problem. I love it!
Question:	Where is it made? What Country
Answer:	Says "Made in China"
Question:	Is this two speakers in the package or one
Answer:	Yes, 2 speakers. (1 with amp ) (1 with storage)