13 best bass speaker for bass guitar

Product description

20 WATT AMPLIFIER 20W Amp with Built In Speaker, 1/4" Instrument Input, Headphone Jack & AUX Input for Playing Along to Music on Phone or MP3 Player

EASY TO USE CONTROLS Integrated Controls Include Gain, Bass, Treble, Volume & Grind , enjoy ultimate control with multiple adjustable dials, a built-in speaker and jack for headphones

AUX HOOKUP 1/8" headphone out jack Connects a phone or MP3 player to play guitar alongside your favorite recorded music

SOUND CREATIVITY experiment with various controls and effects on the guitar and amp, helping to expand your musicality

SECURED EDGES Secured hard rubber corner edges Makes your amplifier stand safe and stable also protects your amplifier from damage and dents

• 20 WATT AMPLIFIER 20W Amp with Built In Speaker, 1/4" Instrument Input, Headphone Jack & AUX Input for Playing Along to Music on Phone or MP3 Player
• EASY TO USE CONTROLS Integrated Controls Include Gain, Bass, Treble, Volume & Grind , enjoy ultimate control with multiple adjustable dials, a built-in speaker and jack for headphones
• AUX HOOKUP 1/8" headphone out jack Connects a phone or MP3 player to play guitar alongside your favorite recorded music
• SOUND CREATIVITY experiment with various controls and effects on the guitar and amp, helping to expand your musicality
• SECURED EDGES Secured hard rubber corner edges Makes your amplifier stand safe and stable also protects your amplifier from damage and dents

User questions & answers

Question:	Do you need batteries
Answer:	Is it plug in
Question:	Will it work with a bass guitar
Answer:	Yep works just fine, just remember its only a 40w with no extras for sound.
Question:	What kind of cable should I get to hook the guitar up to the amp
Answer:	1/4 inc h
Question:	Can I use a DC current from a 12 volt car battery to pwer this amp for outdoor use
Answer:	No. The amp is 110 volt ac.

Product description

Our Frontman amps deliver quality tone at a great price, with custom-voiced built-in overdrive for great tone and the unmistakable Fender Blackface look. The 10-watt Frontman 10G features a 6-inch Special Design speaker and a selectable gain control that can rock guitar tones from tube-emulated overdrive to full-strength ultra-saturated distortion; perfect for blues, metal and the famous Fender clean tone. Closed-back design gives a heavier bass response; the 1/8-inch input lets you play along with your media player of choice; and the 1/8-inch headphone output is great for silent practicing.

• 10 Watts
• 1-6" Fender Special Design Speaker
• One Channel
• Controls: Gain, Over-Drive Select Switch, Volume, Treble, Bass
• Other Features: 1/4" Instrument Input, 2-Band EQ, 1/8" Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8" Headphone Output Jack for Silent Practice, Closed-Back Design for Heavier Bass Response

User questions & answers

Question:	What kind of power supply does this use? Can I plug into the wall or does it take batteries? I'm not very familiar with amplifiers, thanks
Answer:	Documentation does not say, not on the box either. Coverage area indicates it is 2.4. Works very well I wouldn't worry about it. Good luck.
Question:	Would this be good for Karaoke (I have a Karaoke Mixer) or for connecting to a Projector to boost the sound
Answer:	It depends on the dealer's policy.
Question:	Does it come with a wire
Answer:	Just received the DWS-3 system today on recommendations from numerous reviews and forums. Plugged it in using my Warwick Thumb 5-string and GK mb500. No discernible difference from using a standard cable. Handled the low B string just fine. I’m confident it will do fine at gig this weekend with GK+SWR Goliath III cab.
Question:	Can this amp used for violin? Does it has speakers
Answer:	As it is I found that mine did also , after research for a few minutes I found that it was my input jack on the guitar . Don’t know if this helps but I cleaned mine with a burst of compressed air and it helped but ultimately I changed the jack out for a new one and I now have crisp and clear sound .

Product features

Intuitive Easy To Use Controls

For the beginner electric guitarist who wants a straight forward and easy-to-use practice amplifier, the Frontman 10G provides explosive tone with intuitive controls.

The Gain controls how hard you are driving the amp with your guitar.

The Volume controls how loud your amplifier is.

The Treble and Bass controls help you shape the high and low frequencies of your guitar tone.

For thick overdriven distortion at the push of a button, the Frontman 10G features a convenient front-panel clean/overdrive switch.

Headphone Out & Aux In

The 1/8" headphone out jack allows you to practice at any hour without disturbing the rest of your household.

Practice along to your favorite tunes via with the 1/8" Aux In jack.

Classic Fender Vibe

The Frontman 10G provides classic Fender tone in a small package. Silver grille cloth, skirted amp knobs, and Fender amplifier logo provide the Frontman 10G with all the classic aesthetics of vintage "Blackface" amps.

Product description

From the company that invented the electric bass amp, the Fender Rumble Series is a mighty leap forward in the evolution of portable bass amps. With its beefier power amp and larger, ported speaker enclosure, the Rumble 25 pumps volume and deep bass response. In addition to standard volume and EQ controls, the Rumble 25 adds a newly-developed overdrive circuit and switchable Contour control, delivering gritty bite and slap-worthy punch at the mere push of a button.

• Expore bass tones from classic gritty growl to slap-worthy modern punch with the newly-developed overdrive circuit and switchable contour controls
• A beefy 25 watt power amp and ported speaker enclosure pumps volume and deep bass response.
• Practice privately with the 1/4" headphone output jack that also mutes the speaker output.
• Jam along with your favorite tracks by simply plugging a MP3 player into the 1/8" Auxiliary input jack and instantly become part of the band.
• Enjoy the peace of mind that this amp is backed by Fender's 5 Year Transferable Warranty.

User questions & answers

Question:	Is it worth the extra $300 to get the Rumble 500 head and the 410 and 115 cab, rather than the combo + the 115 extension
Answer:	I have the 210 combo and 115 extension. The 115 comes with wheels and I put the 210 on a rock and roller cart. Extremely portable and very loud, it will get louder than your ears can stand. I would say the combo and 115 are plenty. Not worth getting the head and 410, just a waste of money and more weight to carry around.
Question:	As a stand alone unit, are the 210's pushing 500 watts, or do you need to attach another cabinet at lower ohms to get your 500 watts
Answer:	As a standalone unit the two 10 inch speakers are pushing 350 Watts at 8 ohms (Internal). You need to attach an external 8 ohm speaker cabinet to get 500 Watts. Attaching the external 8 ohm speaker cabinet brings the total impedance down to 4 ohms and that is when you get the maximum 500 Watts.
Question:	I'm helping a friend pick out a bass & amp for her son. Would this amp be loud enough for a small entry-level garage band
Answer:	I remember way back when I was in my first band. I had an ampeg B-15 and it was woefully underpowered. All I got out of it was a ton of distortion. It can be very frustrating for a new player to have to deal with poor sound. I’ve known guys who have given up playing because of the frustration of dealing with noise instead of music. I would use a 25w amp for practicing by myself but for a garage band I would go with a minimum of 100w.
Question:	is this amp usable in new zealand
Answer:	I turned mine upside down and it still worked so I suppose it will be OK down there. (On mine, input power is marked 100-120V @ 50-60 HZ, 70W.)

Product features

Ready to Rumble

Small but loud, the Fender Rumble 25 is built with great features including classic Fender styling, 8" speaker, overdrive circuit, mid-scoop contour switch and more. A great practice, at-home and coffeehouse-gig combo for any bassist.

OVERDRIVE SWITCH

At the mere flick of a switch, your Rumble bass amp gives you gritty, aggressive, incredibly rich and satisfying overdriven tone.

AUXILIARY INPUT

For easy connectivity with digital media players and other similar devices, this Rumble combo is equipped with an 1/8" stereo auxiliary input.

HEADPHONE OUTPUT

For convenient personal listening at any time that won’t bring the house down on anyone else within earshot, this amp features a headphone output jack. (headphones not included)

Product description

The Eminence Delta-15LFA 15" speaker's performance is optimized for high power bass in sound reinforcement systems, bass guitar combos, club music systems, and stage monitors.

• Low frequency woofer for pro audio as a mid-bass or floor monitor in a sealed enclosure
• Also suitable as a woofer in vented, bass guitar or PA enclosures
• Ideal for club music and sound reinforcement systems, bass guitar combos, and monitors

User questions & answers

Question:	replacing speakers in a sealed 2 10 gk cab,will these delta 10 b ,be a nice replacement
Answer:	Single speaker ,worth the money they work and sound clean, you got to buy 2 like I did and glad I did made a difference in my 3 ways
Question:	Can this sub work in an IB setup
Answer:	I had a 320 watt 4 channel hifonics which was more than enough power for them
Question:	My pioneer hpm1500 blew the bass. is this a good replacement
Answer:	6.5 but. Will need some insulation araund speakers so it wont make contact to metal. Or make the hole an litter bigger.
Question:	what is the diameter of the mounting flange
Answer:	Seriously? Will a square peg fit in a round hole? No, a 6.5" speaker will not fit in a 4" opening.

Product features

Eminence American Standard Delta 15LFA

The Eminence Delta 15LFA model is specially designed with extended Xmax to deliver more bass than standard models and provide a true woofer for three-way applications. Performance is optimized for high power bass in sound reinforcement systems, bass guitar combos, club music systems and stage monitors. Rated at 500 watts, 1000 watts music program and 8 ohms.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

The new Sawtooth 10-watt guitar amp produces a variety of tones in a compact size. The perfect practice amp for going over scales, chords, and simply rockin' out to your favorite tunes! This amp has volume, treble, mid and bass controls along with an overdrive switch that allows you to go between clean and overdriven sounds. The Sawtooth 10-watt amp is a great starter amp and serves as the perfect practice tool for those that graduate to a larger amp. Pick up a Sawtooth today and start jammin' with power!

• Power Requirements & Consumption: 120VAC, 60Hz
• Total Output Power (RMS): 10W RMS @ 4Ω
• Speaker: 6.5”; Controls: Volume, Gain, Drive
• Master EQ: Treble, Middle, Bass; Jacks: Input- 6.35 MONO JACK; Headphones- 6.35 STEREO JACK
• Includes: ChromaCast 10ft Instrument Cable & Pick Sampler

User questions & answers

Question:	Does this have an inbuilt battery that it can use if I want to play where there is no power source
Answer:	No it has only the power cord.
Question:	Purchased one month ago. All I get is static..... help? What’s the warranty on this
Answer:	Ours is working fine, ask to return to Amazon for refund or replacement
Question:	This keeps coming up as a bass amp. Is it ok to use with my bass guitar
Answer:	playing bass at lower volumes would probably be ok. cranking it up would shred it. great little guitar amp though.
Question:	anyone else experiencing a very loud buzzzz when you plug in
Answer:	You ALWAYS GET BUZZ if you plug in after turning on any amp. There is an interval when you insert the plug that one circuit—the one to ground—isn’t connected. It’s momentary. You should ALWAYS PLUG IN BEFORE turning the amp on. Now, if it continues to buzz after the cable is fully plugged in, try another cable. If the buzzing stops, that first cable has a broken connection on the ground side. This is generally caused by the leads inside the plug breaking off where they’re soldered. Unscrew the plug at both ends and check for loose, unattached wires. If you find one, re-solder it. If no broken connections are found, the break is somewhere inside the cable. Unsolder and keep the plugs and toss the cable. If after inserting a second cable, the buzzing continues, the problem is inside the amp circuitry. Return it, or toss it and get a better one next time.

Product features

Sawtooth 10 Watt Amp Specs

• Power Requirements & Consumption: 120VAC, 60Hz
• Total Output Power (RMS): 10W RMS @ 4Ω
• Speaker: 6.5"
• Controls: Volume, Gain, Drive
• Master EQ: Treble, Middle, Bass
• Jacks: Input- 6.35 MONO JACK, Headphones- 6.35 STEREO JACK
• Signal to noise ratio: : ≥70dB
• Dimensions: 9.65" height x 10.1" Length x 4.13" Width

Reinforced Handle

The reinforced handle makes transporting your amp easy between your studio and your next gig!

Sturdy Construction

The vinyl covered wooden frame of Sawtooth 10 Watt guitar amps provides a hardy shell that wont fall apart if you accidentally knock it over while rockin out!

Open Weave Grill

The open weave fabric grill allows more sound projection and reduces the overall weight of the amp, making it loud enough for small venues, and easy to transport.

Tons of Control!

Try different settings to find the sound that works for you with adjustable Gain, Treble, Mid, Bass, and Overdrive!

• JOYO MA-10 series features dual channel dedicated for the related instruments switching easily. MA-10B: Switchable Normal / Drive dual channel.
• 5 inches customized full frequency speakers. with rated power of 10W (RMS), full frequency speakers dedicated for the related instruments.
• High quality Aux In Jack for playing backing track, 3.5mm stereo headphone output Jack, ensuring subtleness of music and interference-free.
• Different power supply modes, we can use the attached power adapter or 6xAA batteries, about 3hrs battery life with AA alkaline batteries. Innovative logo will light when it's switched on.
• Compact and lightweight body, plus 2 hidden shoulder strap buckles on both sides of the amp for conveniently hanging the shoulder strap(not including), easy to carry. Directly sold by manufacturer of JOYO Technology Co.,LTD which established at 2006.

User questions & answers

Question:	Can I use my acoustic I rig mic with this? With the headphone type plug
Answer:	there is an AUX IN jack that takes a 3.5mm plug. Yes.
Question:	Will this sound good if I’m Playin piano using my midi keyboard
Answer:	Depends on how good your speakers are in your keyboard if your keyboard has stereo speakers they're probably going to sound better but as far as a little amp goes it's adequate
Question:	what kind of cable do I need to connect to my Uke
Answer:	Dear JOYO fan or user, it required a normal audio cable connect to Uke. thanks for your question.
Question:	Can a microphone be plugged into this amplifier
Answer:	Yes but you'll want to be aware that the amp takes a 1/4" plug, so you might need a converter. I also would be cautious if the mic requires phantom power. The amp doesnt provide it, so you'll need to get it elsewhere. If you have a mic preamp, then you could also plug the mic into that and the preamp into the aux jack, which would allow you to still be able to plug a guitar into the 1/4" jack. However be aware that the aux jack doesnt go through the volume/tone/gain, so you'll need to provide that elsewhere (which is why a preamp would be helpful)

Product features

Compact & Portable

• If you want to carry the amplifier like the picture above, there are 2 hidden buckles on the sides of the amplifier to install the shoulder strap (NOT INCLUDED). Rotate until you find them, then hang your favorite shoulder strap.

Other Details

Please Note:

1. Do not use the Amp in high temperature, high humidity, dirty or strong shock circumstance.
2. Do not drop off this Amp or bump it off hard surface.
3. Please do not dissemble or repair the amp by yourself.
4. Please keep the manual and box for future reference.

Package included:

• 1 x JOYO MA-10B Bass Amplifier
• 1 x User's Manual
• Strap is not included

• Can be daisy chained;   Dual ports (both in the middle);   19" tall -26" wide -15" deep
• Woofer -two 10" each has a 50 Ouncemagnet with a 2" kapton voice coil;   200 watts rms -400 watts peak
• Wired at 8 ohms.  40hz –5khz  sensitivity: 97 db.  5/8 plywood front panel.  Full metal grill
• Black carpet with black metal corners.  Recessed handles.  Metal jack plate with two 1/4" jack inputs

User questions & answers

Question:	I have a 200w 4ohm bass head. Will this cabinet, by itself be able to cut through a bands mix? (guitarist and drummer
Answer:	Yes, it should. I’ve used this cabinet as an add on to a rig for larger gigs and venues, and for smaller gigs it’s enough to cut through. It’s a classic sound similar to an Ampeg 210 cabinet without a high frequency horn, but there is still articulation.
Question:	If I got two of these 2x10 cabs, what amp heads could drive that
Answer:	I would say anything from 100 watts to 600 watts. I have run mine with a Gallien Kruger 700RB and also a Hartke 350. They can handle a high powered head, but I would recommend you start out at very low volume and not to blow them out. With my GK, I am now running a Seimic 4x10, and in a club setting, rarely have I had it over a 2 on the master volume. Tone is killer. Have also used my 2x10 with a 15" in another cab and sounded great that way too. One advantage to having a pair of 2x10's is the weight and ease of moving it. My 4x10 is heavy in comparison, but they sound pretty much the same. What amp head are you considering?
Question:	is this really 4 ohms? I did some research on another site and it said it was 8 ohms...i am confused i dont want to buy the wrong thing
Answer:	ou can order it either 4 0r 8 ohms if I remember correctly. Mine is 4 ohms and very impressive especially for the $$.
Question:	I have a bass guitar amp head for this already, but whats a good little pre-amp/reciever to push this little guy with good sound/bass for DJing
Answer:	Hi Kam,Thanks for your continued interest in Seismic Audio! Any combination of our mixer/power amps will work for this. They can be found here:http://www.seismicaudiospeakers.com/Amplifiers-s/221.htmConsidering this is a bass guitar cabinet, you won't get the same result as if you ran your audio through a full range speaker with some subs. That would be the ideal setup for a DJ type application. Let me know if your have any questions.Thanks,Rusty

Product features

Seismic Audio 2x10" Bass Guitar Cabinet

Great for studio or live performances. Whether you have a permanent installation or mobile, this pair of is rugged enough to handle whatever you throw at it - road ready and built to last. The quality of your sound can only be as good as your equipment and this bass guitar cabinet should not be overlooked. Each cabinet contains two 10" woofer with a 50 oz. magnet and 2" Kapton voice coil yielding crystal clear sound while rejecting extraneous noise. Each cabinet is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners. These features along with the recessed handles and full metal grill make this cabinet fit right in with your other professional equipment on stage. Awesome quality dual speaker cabinets are very hard to find, especially when low on cash. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. With your purchase, you will receive a 15" bass guitar cabinet pictured and described above. So, grab one today and get ready for years of trouble-free, punchy bass sound!

SA-210

This listing is for a 2x10" passive bass guitar cabinet pictured and described above. The dual-ported SA-210 provides great low-end reinforcement along with great articulation in the mid range. Loaded with two of our 10" woofers, and at 4 ohms, the SA-210 packs a powerful punch! At 400 Watts RMS, the SA-210 makes for a great smaller rig or couple this with our dual 15” bass cabinet to give you some serious low end!

Jack Plate & Inputs

Our SA-210s are outfitted with heavy-duty jack plates that house two 1/4" inputs enabling this speaker cabinet to be easily daisy-chained and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.

Protective Hardware

Heavy-duty, rugged hardware protect our SA-210 cabinets with a fully metal grille on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

In order to transport your speaker cabinets easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Eminence Legend CA154 15in 300W 4 Ohms

• Pro sound 15" woofer for use in bass guitar cabinets or in a PA cabinet
• A 4 ohm driver with high SPL
• Easily handles 600W and frequencies from a low 45 Hz to 3 kHz

User questions & answers

Question:	Have a tube ampwith 12in 4ohm if i changes that out with the 15in here what would be the result
Answer:	well depends on the cab as well but it should work fine and give the tone people love from this driver
Question:	Would this be a good choice as a replacement for a Peavey combo
Answer:	as long as it is 4ohm to the connector from the amp internally (and it should be 4ohm on a single 15" combo), then I would think it would work great. Mine went into a Peavey TNT 130 (400 watt) combo amp from the 80's, and it was a fantastic replacement.
Question:	Have a tube ampwith 12in 4ohm if i changes that out with the 15in here what would be the result
Answer:	You need to compare it to the power rating of the existing speaker and amp. If the amp is rated at 50 watts and the 12 inch speaker at say 100, then you will not get quite the mid to high end clarity with this 15 inch, 300 watt speaker. But if the amp is rated at say 100 watts and the 12 inch at 200 watts (or thereabouts) then you will only loose some of the very high end response. (If it's a bass rig you're on about, then you won't care about the very high end loss.)
Question:	What is the big difference between a 4 ohm speaker and an 8 ohm speaker
Answer:	It has to do with an amplifiers ability to source current to a load. With all things equal, a 4 ohm speaker requires twice the current draw than a similar 8 ohm version.

Product features

Eminence Legend CA154

The Eminence Legend CA154 is a pro sound 15 inch Woofer for use in Bass Guitar cabinets or in a PA cabinet. It can easily handle 600 watts and reproduce frequencies from a low 45 Hz to 3 kHz.

Look inside most name brand bass amps and you’ll find custom designed, Eminence bass guitar speakers. The people who make them know what bass players want. From fast and tight to fat and round, Eminence speakers give you the tone to hold it all together.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

Bass Practice Amp

TAR-20B is a bass amp, but way more than just a practice amp. You might let the size fool you. But trust me this little fella is legit. It has 20w of pure analog power. The range of EQ is wide enough for you to shape your bass tone to anything you like, from Motown era vintage p-bass low mid thing to modern day super ultra fat low-end stuff. It does it all!

A Guitar Hack!

As you know, many bass amps were originally designed for the bass and then recognized as a guitar thing. Think about Bassman. TAR-20B is no stranger to that. I tried my Strat on it one time. It blew my mind. I mentioned the EQ range above, but haven't said anything about the GAIN. The GAIN circuit is wired to emulate the classic SVT style tone. But with the combination of GAIN and EQ, magic happens. You can the tonal characters of a lot of vintage amps. Twin, Tweed, JTM, AC 30, JC 120, the list goes on and on.

Keep It Light

The TAR-20B is designed to be compact and light-weighted so that you can put it in the gig bag and grab it on a go. But we added a little CAB SIM and headphone jack and AUX IN jack. So you can plug your instrument in and put your headphone on, then play anywhere and anytime, with any backing tracks you want. Not only it weights light, but also you can keep the volume light.

Other Features

TAR-20B has a chorus circuit in it for you to expand your sonic dimension. And as any bass guitar amps out there, it has an FX Loop for you to add additional effects in it. And it has a 4/8 Ohms compatible speaker output.

Specifications:

Power：18V DC center negative(included)

Current Consumption: 1500mA

Dimensions: 180mm(D)×95mm(W)×35mm(H)

Weight：816g

EQ：LOW: 70 Hz/MID: 800Hz/HIGH: 3.5kHz, ±9dB boost/cut range Max.

Output Power：20 watts

Speaker Out: 4/8 Ohms

• Pure Analog Preamp Design with Super Wide Tonal Range from Motown Era Vintage P-Bass Low Mid Thing to Modern Day Super Ultra Fat Low-End Stuff
• Max. 20W Pure Solid State Output Power sounds and responses like Vacuum Tubes Amp with Rich and Harmonic Tone
• AUX IN & Phones jack with Cab Simulator for directly plugging into Audio Interface or PA System
• Built-in Chorus for Expanding the Tone Dimensions; FX Loop for Hooking up other Effects
• 4/8 Ohms Compatible Speaker Output

User questions & answers

Question:	Can this work with a 15 inch passive speaker i.e. rockville rsg
Answer:	yes it can as long as the impedance is correct. Check the specs to see your speaker has the right values.
Question:	Will this work with a 16 ohm speaker cabinet
Answer:	Yes, can be used with any 8/16 Ohms speaker output
Question:	Is this good for a gig
Answer:	Depends on your cab efficiency. With most medium volume gigs this amp won't work. It will work with acoustic gigs (drummer using brushes or is behind plexi, but is best used for bedroom to up to living room sized spaces.

Product description

For bass players demanding well-defined clarity and stunning articulation together with a rich, full tone, PULSE12 bass speakers deliver an ideal combination of responsiveness and rock solid low end. The Kevlar-loaded cone pulses with up to 200 watts of raw bass power. Expect each note from these 12 inch bass guitar speakers to deliver a thick, percussive attack along with the mid-range necessary to break through in any performance situation.

• 12" Bass Guitar Speaker
• 200 Watts
• 8 Ohm
• Kevlar Loaded cone
• Delivers a thick, percussive attack

User questions & answers

Question:	Can the 12" be used in an open/vented enclosure without loosing a lot of punch
Answer:	I have it in a vented, closed cab. Sounds great. Lots of nice, deep sound for upright. I put it in a Powered PA cab, and use a preamp with it.

Product features

Celestion Pulse Bass Guitar Range

For those that bring rumble and thunder, Celestion has created PULSE – a range of three powerful, dependable, ferrite magnet bass speakers built to deliver your sound with all the punch and clarity you need to hold down the bottom end in any musical situation. Rigid steel frames ensure maximum energy transfer, highly responsive Kevlar-loaded cones enhance the dynamics, extra-long voice coils extend ‘throw’ and multi-roll surrounds increase bass response.

Product description

Eminence Beta Series 15 Inch Spkr 350W 8 Ohms

• Recommended for pro audio as a woofer in sealed and vented enclosures
• Features optimized frequency response and power handling
• Ideal for 2/3-way speaker systems, guitar/bass/keyboard combo amps, and monitors

User questions & answers

Question:	Are these the best match for my situation? I have three way sealed tower speakers with passive radiators and I want to replace the 12 inch drivers
Answer:	I wouldn't use them in that application. They're more suitable for a guitar or bass amp.
Question:	Got my Beta 15A speakers but there's no polarity indicated on the hookup tabs. Can you advise
Answer:	I've since sold that amp but I would recommend you look up some closeup installation photos online to determine the hot (positive) lug.
Question:	I've tried these speakers through combo bass amp I intended and through a separate head, and they always buzz like crazy. Are these really for bass
Answer:	These are officially a loudspeaker, ideally for PA reinforcement. I have managed to get a good sound from them for bass, though there is a lot that goes into choosing specific speakers for your specific cab. Putting two of these in a guitar 2x12 cab will most likely not produce an incredible bass sound.
Question:	are the betas louder than the alphas
Answer:	YES

Product features

Eminence American Standard Beta 15A

Recommended for professional audio as a woofer in sealed and vented enclosures, the Eminence Beta 15A Speaker features optimized frequency response and power handling for use as a replacement speaker for two and three way speakers systems, bass and keyboard combo amps, guitar combo amps and stage monitors.

Each Eminence American Standard model can be identified by its economical Stamped Steel chassis. More affordable than cast aluminum, these frames provide an excellent and versatile chassis.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

Specifications

Color: Black, golden

Output: 3W

Speaker: 3" 4ohm or 8ohm

Battery: 1 * 9V 6F22ND battery (not included)

DC jack: DC 9V

Item size: 12 * 12 * 5.5cm

Item weight: 387g

Package size: 13 * 6.8 * 13cm

Package weight: 424g

Package including:

1 * Electric Guitar Amplifier

• 3W power amplifier. Excellent performance & elegant design. Adopts high-sensitivity dedicated guitar speaker.
• Sound is clear and clean, with excellent sound effects. Equiped with the volume & the tone controlling functions.
• With an input port and a headphone port. Compact, reliable and durable.
• With a metal clip, it is convenient to hang.
• Perfect for the guitar learners to practice.

User questions & answers

Question:	Este sería bueno para violín electrico
Answer:	En realidad para violin , no.
Question:	Does this come with an adapter
Answer:	No it doesn’t. Had to purchase it separately
Question:	Does this work with a bass guitar, not an electric guitar, bass
Answer:	Might be too dirty. Not much clean headroom
Question:	Does it include the A/C wall adapter
Answer:	It doesn’t come with any form of power adapter or batteries

Product description

Eminence Legend BP 102-4 10in 200W 4 Ohms

• Ideal for pro audio and bass guitar applications as a mid-range speaker
• Useful in both sealed or vented enclosures
• Works well in single or multi driver designs
• 200W 4 Ohms

User questions & answers

Question:	Is this a good replacement for a speaker in a trace Elliot 4 10 cabinet
Answer:	Be sure to measure the cutout width in your cab. I have a 2X10 trace elliot and I could NOT fit these speakers into it. It originally had Celestions which are 1/8" smaller than the Eminance; 229mm compared to 233mm. I know it doesn't look like much but it won't seat properly. I went to Celestion pulse 10's.
Question:	Will this work as a replacement woofer in an octasound sp520a box
Answer:	that box seem more like it's using a beta 10A looking at the specs. This bp102 will have more bass potential but sacrifice midrange efficiency and not work as well with the internal crossover. Get the Eminence Beta 10A and be sure to select SpeakerAddict as the supplier ;-)
Question:	Would i be able to use this as a replacement speaker for a fender rumble 25? the stock speaker is 8” but there’s enough room to cut a 10” hole
Answer:	Yes if your good at that. The speaker will take I believe 300 watts at 8 ohms so the small amp in the unit will drive it. Bear in mind that Fender is only 25 watts so not a lot of volume but good for practice.
Question:	Will this speaker work well in a sealed fender bassman 4x10 cab
Answer:	I’m using it for upright in a ported enclosure as a single speaker powered by a portaflex 350 head. Sounds great- it should work well in a sealed cab.

Product features

Eminence Legend BP102-4

Eminence Legend BP 102-4 speaker is recommended for professional bass guitar applications in a sealed or vented enclosure. Works well in single or multi-driver designs.

Look inside most name brand bass amps and you’ll find custom designed, Eminence bass guitar speakers. The people who make them know what bass players want. From fast and tight to fat and round, Eminence speakers give you the tone to hold it all together.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.