12 best electronic music equipment

• PROVIDES 40 SECONDS OF SAMPLING MEMORY - The Teenage Engineering PO-33 has a built-in microphone for you to record 40-seconds of samples directly.
• PLAYS YOUR SAMPLES CHROMATICALLY OR AS ONE-SHOTS - The 8 melodic slots let you play your own samples chromatically while the 8 drum banks play your sample as a one-shot.
• ADDS PERCUSSION TO YOUR PERFORMANCE - The PO-33 is a 4-voice sampler. Its built-in micro drum machine allows you to layer more drum sounds over the sample recording.
• ENHANCES YOUR SOUNDS - You can add a loop or stutter FX from the 16 onboard effects to create knockout samples.
• INCLUDES - Teenage Engineering PO-33 Pocket Operator KO Sampler / Sequencer. 3-Pack of Blucoil 7-Inch Audio Aux Cables. 4-Pack of Blucoil 1.5V AAA Alkaline Batteries.

User questions & answers

Question:	How was this package damaged? The third thumbnail looks very warped. Thanks
Answer:	The buttons are flush with the side of the case and are marked with texture. It is just as easy to press the buttons with the case on as it is without it
Question:	This does not come with a case, correct
Answer:	Yes, it is comparable the other brand.Thank you for your question.
Question:	Is this thing of good quality
Answer:	Completely

Product features

Take Your Creativity Wherever You Go

The Teenage Engineering PO-33 K.O! Pocket Operator is a powerful micro sampler, synthesizer & sequencer, all packed into a small and ultra-portable design. With studio quality sound, play chromatic melodies and drum sounds, sequence it all and add effects on top to create something truly original.

TECHNICAL SPECS:

• Type: Digital Sampling Synthesizer
• Oscillator Modulation: Keybaord, Knob
• Sampling Notes: 40 seconds
• Sequencer: 16-steps, 16 patterns
• Number of Effects: 16
• Input &Output: 1 x 1/8" (3.5 mm) TRS stereo mini-jack
• Power Requirements: 2 x AAA batteries
• Battery Life: Approx. 1 month
• Dimensions (WxDxH): 2.4 x 4.9 x 1.2"
• Weight: 0.2 lb

Also Comes With:

Blucoil 7" Audio Aux Cables (3-Pack)

Sync all of your Pocket Operators with the Blucoil Aux Cables! Using the 7-inch audio cables, you can interconnect PO-12 Rhythm, PO-14 Sub, PO-16 Factory, PO-20 Arcade, PO-24 Office, PO-28 Robot, PO-32 Tonic, PO-33 K.O!, and PO-35 Speak. You can even use the cable to sync the Pocket Operators to a volca, iPhone, computer or synckontrol.

Blucoil AAA Batteries (4-Pack)

This kit includes four Blucoil 1.5V alkaline batteries you can use to power any of the Pocket Operators. The AAA batteries have high energy density, twice the amount of a zinc-carbon battery. Hence, each alkaline cell can be used for extended periods. You can enjoy playing with your Pocket Operator hassle-free!

Product description

Introducing the MPK Mini MK3 – Your Hit Song Starts Here! Introducing the MPK Mini MK3, the 3rd iteration of the world’s legendary best-selling mini 25-key plug & play USB MIDI keyboard controller that redefined how a generation of creators make music. Everything the modern music producer demands is here: Universal compatibility for instant integration with your favorite host music production app (DAW); its compact size makes it an ideal travel companion; its arsenal of beat pads, an arpeggiator, MPC Note Repeat & Full Level, a 4-way joystick and MIDI assignable controls let you take compete command of every aspect of your production; the new Gen 2 enhanced dynamic keybed guarantees your performance is captured with every subtle inflection of your delivery. For the beginner, MPK Mini is a complete package with every tool you need to create hit songs from the get-go. For the working professional, MPK Mini is the ultimate musical Swiss Army knife, ready to deliver on any musical task. Every song starts somewhere, so rid yourself of any roadblocks by starting your next hit with MPK Mini. Complete Music Production Starter Kit Your journey to a hit song starts with MPK Mini and the Complete Music Production Starter Kit is the roadmap to your destination. Start with a DAW based on the legendary MPC workflow, add in drum and sample expansion packs that the industry pros use, and top it off with the most versatile virtual plugin instruments available today, the possibilities are endless. Featured software includes MPC Beats, AIR Hybrid, Mini Grand, Velvet and assorted MPC Expansion packs. Setup Simplicity Don’t want to get bogged down in complicated installs? MPK Mini features a single install (available as a download upon registration on the Akai Professional website) of all this industry-standard software so you spend less time bogged down in technicality and more time creating your next hit!

• Music Production and Beat Maker Essential – USB powered MIDI controller with 25 mini MIDI keyboard velocity-sensitive keys for studio production, virtual synthesizer control and beat production
• Total Control of your Production - Innovative 4-way thumbstick for dynamic pitch and modulation control, plus a built-in arpeggiator with adjustable resolution, range and modes
• The MPC Experience - 8 backlit velocity-sensitive MPC-style MIDI beat pads with Note Repeat & Full Level for programming drums, triggering samples and controlling virtual synthesizer / DAW controls
• Complete Command of your Virtual Instruments and FX - 8 360-degree knobs assign to all your music studio plugins for mixing, tweaking synth controls and more
• 1500+ Sounds and Everything You Need for Pro Production – Complete Music Production Starter Kit including MPC Beats, 6 Virtual Instruments and 2GB of sound content

User questions & answers

Question:	are the keys velocity sensitive
Answer:	No, this is a pretty bare-bones controller.
Question:	is Mpc Beats (daw) work in reaper ? Can the midi from Beats be tranferred to reaper as midi? are any of the sounds vst's
Answer:	I dont know ,but i finely got mine to work in garageband on my Mac with the help of the music store salesman on the phone with korg. etherway it is not simple to set it up by yourself.to me the instructions are totally wacked unless you have advance knowledge in music software tech. who ever designed it did not think of the average person setting it up... Good luck........
Question:	Can it control the mpc live
Answer:	No, only the the big knob on the top left is a rotary encoder. All the other knobs are pots and turn thru only about 330 degrees, then stop.
Question:	Does this work for Fl Studio
Answer:	It has no software.It's a USB controller that can be used with a variety of programs which allow for assigning functions to USB. I use it with Reason for audio recording and mixing.

Product features

Your Hit Song Starts Here

Your entry-point into a world of pro production starts here. Introducing the MPK mini mk3, the 3rd iteration of the world’s legendary best-selling USB MIDI 25-key mini keyboard controller that redefined how a generation of creators make music.

Product description

Roland TR drum machines have impacted music for over 40 years—and they're as influential now as ever. Based on the much-loved TR-8S, the compact and affordable TR-6S has the same speaker-pummelling, window-rattling, body-moving sound of its bigger sibling. Elevate your drum tracks, make beats on the go, and experience the joy of hands-on production. With the TR-6S, the sound of classic tracks, today's trends, and tomorrow's hits are always within reach.

• Elevate your drum tracks, make beats on the go, and experience the joy of hands-on production. With the TR-6S, the sound of classic tracks, today's trends, and tomorrow's hits are always within reach.
• Based on the much-loved TR-8S, the compact and affordable TR-6S has the same speaker-pummelling, window-rattling, body-moving sound of its bigger sibling.
• With the TR-6S, you get six tracks of advanced drum sequencing and the most iconic rhythm sounds in music history—all in a battery-powered box that fits just about anywhere.
• Detailed circuit models of the Roland TR-808, TR-909, TR-606, TR-707, and more
• Large preset sample library with support for custom user samples
• FM sound engine for futuristic tones
• Mix and match sounds for exotic hybrid drum kits

Product features

TR-6S Rhythm Performer

Roland TR drum machines have impacted music for over 40 years—and they're as influential now as ever. Based on the much-loved TR-8S, the compact and affordable TR-6S has the same speaker-pummelling, window-rattling, body-moving sound of its bigger sibling.

Elevate your drum tracks, make beats on the go, and experience the joy of hands-on production. With the TR-6S, the sound of classic tracks, today's trends, and tomorrow's hits are always within reach.

Six tracks of rhythmic bliss

With the TR-6S, you get six tracks of advanced drum sequencing and the most iconic rhythm sounds in music history—all in a battery-powered box that fits just about anywhere. And like other Roland drum machines, it's fun and inspiring. With the familiar step-sequencer, plus dedicated faders and knobs, it's easy to craft custom beats with visceral, hands-on control.

The gold standard in drum programming

The sound of today's music owes a lot to the classic step-sequencer—particularly the "TR-REC" variety found in early Roland drum machines. The TR-6S employs the same tried-and-true approach, enhanced with realtime recording and modern features like sub-steps for ratcheted parts and motion recording for rhythms that move.

Legendary drum machines built-in

The TR-6S is filled with authentic recreations of legendary Roland drum machines that have defined genres and driven culture for decades—including the 808, 909, 707, and 606. And these aren't sample packs or cheap knock-offs—they're living, breathing replicas that sound and behave just like their vintage counterparts.

All the sounds and more

Going further, you can mix-and-match these sounds with preset and custom samples and futuristic FM tones, creating exotic hybrid kits that reflect your unique taste and style.

Positive effects

Create punch, space, warmth, or grit with the array of high-quality effects in the TR-6S. Vital compressors and EQs are at your fingertips, along with lush reverb, delay, and modulation effects. Push your creative boundaries with filters, LFOs, and wild new effects that incite sonic mayhem.

Convenience and flexibility

The TR-6S is a also a high-quality USB audio/MIDI interface, perfect for mobile or minimal production setups. And it fits in even the most space-starved studios or live rigs, so you can turn life into music whenever inspiration strikes.

Product description

Zoom H5 handheld portable digital recorder.

• Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
• Includes detachable x/Y capsule (xyh-5) with extended signal capacity and shock mounted mics for reduced handling noise
• Four-track simultaneous recording; Built-in speaker: 400mw 8 Ω mono
• Two mic/line inputs with XLR/TRS combo connectors each with selectable Phantom power and -20dB pad
• Runs on 2 AA batteries and records directly to SD/ SDHC cards up to 32GB
• Max sound pressure input: 140 dB SPL

User questions & answers

Question:	I am a new podcaster. Would someone be kind enough to explain how I would use this to interview someone over the telephone? Would skype be involved?th
Answer:	Yes, you will want to use a software like Skype or Google Voice. You can connect the headphone output of your computer to one of the H5 inputs.
Question:	If this unit is powered off and a USB cable is connected to a computer does it automatically turn on or will it stay off
Answer:	It will automatically turn on with the option to select its use as an interface or storage device...hope this helps.
Question:	Is the battery life significantly improved over the H4N? I like my H4N, but it's terrrible on phantom power for battery life
Answer:	I can't compare it to the H4n. I got about 8-10 hours on the h5 using alkalines and phantom being on for nearly all of that time. It gives very little warning when the batteries are about to go.
Question:	Judging from the pictures it looks to be made of plastic. Is this fragile or robust
Answer:	It does not have a plastic feel. If you have ever held an H4n than this will feel somewhat the same. The H5 has a slim, but sturdy feel. It's not the kind of item that would break easily. The thing with the H5 is that it is so cool looking that you're always worrying about getting a single scratch on it. Fortunately, the rubber like exterior seems to handle scratches pretty well. Highly recommend that you get a screen protector as soon as you take it out of the box. I've held both the H5 and H6 and while the H6 feels slightly heavier and more professional with all the knobs, nice looking finish and a great color screen. The H5 feels lighter, has great build quality and you are more likely to use it because it light enough to mount on a rig or carry around... Without the fear of it breaking. I've bumped it on a few corners with my rig and it has held up pretty well. The only thing that feels like plastic are the adapters, but that applies to both the H5 and H6.Hope that helps.

Product features

The Zoom H5 Handy Recorder

The compact and portable H5 gives you everything you need to create professional quality audio. It comes with a detachable stereo X/Y microphone and utilizes a system of interchangeable input capsules that allow you to choose the best mic for every situation.

Ideal for live concert and rehearsal recording as well as audio for video, the H5 is equally well-suited for podcasting, broadcasting and electronic newsgathering.

XYH-5 shockmounted X/Y mic capsule

The advanced XYH-5 provides dual matched unidirectional condenser microphones housed in an advanced shockmount to minimize vibration and handling noise-ideal for location videography and broadcasting/podcasting. In addition, the XYH-5 is designed to handle extremely loud sounds, making it the perfect choice for capturing the sound of live rock concerts and for electronic newsgathering (ENG) applications.

XYH-6 large diaphragm X/Y mic capsule

The XYH-6 allows you to do stereo X/Y recording and provides dual large diaphragm mic elements with adjustable width-choose 90 degrees for a more focused sound or 120 degrees for a wider stereo image. It''s great for recording classical music and for capturing sound effects in the field.

MSH-6 MS (Mid-Side) mic capsule

Step up to a whole new level of precision sound-shaping with the MSH-6, which contains a forward-facing, unidirectional mic (the 'Mid') and a side-facing, bi-directional mic (the 'Side'). In conjunction with the H5''s onboard MS decoder, it allows you to capture a fully mono-compatible stereo image that can actually be adjusted after recording-ideal for film, video, and television projects.

SGH-6 Shotgun mic capsule

Get all the pickup with half the length by connecting an SGH-6, which adds a professional-quality, highly directional shotgun microphone to your H5. Three elements, combined with digital signal processing, give you the highly directional pickup power of a conventional shotgun in a unit only half the size, making it optimum for recording dialogue and narration with no intrusive mic in the scene.

EXH-6 Dual XLR/TRS Combo capsule

The EXH-6 adds two more mic- or line-level inputs to your H5, allowing you to connect up to four discrete signals from external microphones, instruments, mixers, or portable music players and fully realize your creative vision.

Product description

Beat Production - Anywhere

Akai Professional’s MPD218 is a MIDI-over-USB pad controller perfect for producers, programmers, musicians and DJs alike. Its intuitive blend of MPC controls and technologies mesh with seamless USB connectivity to bring the feel of classic beat making into the world of computer music production. At the heart of MPD218 are 16 ultra-sensitive, hyper-playable Thick Fat MPC pads, ideal for triggering drums, one-shots, melodic samples, basslines and more; with 3 pad banks available and a pressure- and velocity-sensitive specification, expand MPD218’s performance capability to 48 fully-assignable, ultra-reactive triggers that capture every subtlety and nuance of your performance.

• Beat Production, Anywhere - Ultra-portable, feature-packed and USB powered pad controller with 16 thick fat MPC pads for triggering drums, melodic samples, effects and more
• Expandable Banks - Easily accessible dedicated controls for three pad banks provides a total of 48 assignable pads
• Assignable Control - 18 fully assignable 360-Degree potentiometers accessible via three banks for controlling DAW, virtual effect and virtual instrument parameters
• Feature Packed - MPC note repeat and full level controls for immersive expressive performances
• Comprehensive Software Suite Included - Ableton Live Lite, Sonivox Big Bang cinematic percussion and Big Bang universal drums
• The MPC Production Experience - Includes MPC Beats Software complete with the finest features and essential production tools from the Akai Professional MPC Series
• iOS Connectivity Covered - Control your iOS apps and open up a world of pad control capability using the Camera Connection Kit (sold separately)

User questions & answers

Question:	can this work with serato dj and plug into a numark mixtrack platinum
Answer:	I have used this to load hot cues in a different program, but I imagine you can map the pads to hot cues.
Question:	Why is the same product advertised for 2 different price? One not in store until the day before Christmas costing $20.00 less
Answer:	Not sure why, but probably different merchants setting their own price.
Question:	I think i know the answer to this, but is there a 5 pin midi adapter? i don't want to use a computer. i want to use outboard gear
Answer:	Hi, Akai Pro support here! Thanks for your question. Our MPD218 will only send MIDI via USB. With this said, our MPD226 will allow you to send MIDI via the 1/8" MIDI output; x2 1/8" to 5-pin MIDI adapters are supplied with our MPD226. I hope this helps and If you have any further questions, please feel free to contact us directly - [email protected] Thanks, Krishan
Question:	can you change the sensitivity on the pads
Answer:	I have the mpd218 and it goes by how hard you press the button, there is a button labeled "full level" when it's lit no matter how soft or hard you hit the button its at the loudest level, make sure that button is not on

Product features

The Ultimate Beat Production Studio Centerpiece

The MPD218 is a MIDI-over-USB pad controller perfect for producers, programmers, musicians and DJs alike.

Its intuitive blend of MPC controls and technologies mesh with seamless USB connectivity to bring the feel of classic beat making into the world of computer music production.

MPC Beats Software

Whatever you set out to achieve, MPC Beats will get you started. Incorporating the finest parts of the legendary MPC workflow, MPC Beats features all the essential tools for pro production.

Edit samples, mixdown your tracks, find any sound with the synth engines found on the legendary MPCs, record audio and much more.

MPC Beats will host your AU/VST plugins so as you expand your arsenal, know you’ll have complete compatibility with industry standard virtual studio technology.

Product description

Dexterous, versatile, and powerful, the only thing “mini” about this Ableton controller is the size. APC mini is the most portable all in one Ableton controller solution with Akai Pro build quality. Engineered specifically for the mobile musician and the desktop producer, APC mini concentrates the essential features of the APC40 mkII, Akai Pro’s flagship Ableton controller, into a compact design that fits in your backpack. The result is a dynamic instrument that empowers you to make music with Ableton Live—anywhere.

• Complete Control – Ultra portable USB MIDI Controller for Ableton Live, perfect for mobile music performance and production
• Jam, Compose, Create - 8x8 MIDI clip matrix with tri-colour lighting seamlessly integrates 1-to-1 with Ableton Live - perfect for clip launching, sampling / sample triggering and more
• Integrated MIDI Mixer - 8 assignable faders + 1 master fader instantly map to Ableton live's mixer for hands-on mix control
• Tweak Your Sound - Seamlessly map APC Mini's controls to virtual effect and instrument parameters for expressive, immersive performances
• Simple Setup - USB-powered and plug-and-play setup for Mac and PC
• The MPC Production Experience - Includes MPC Beats Software complete with the finest features and essential production tools from the Akai Professional MPC Series
• Everything You Need - Comprehensive production software package for Mac and PC included: Ableton Live Lite, Hybrid 3 by AIR Music Tech, and Toolroom artist launch packs (downloads)

User questions & answers

Question:	Does the 8x8 grid of soft buttons send note on and note off for each press? Is it a fixed velocity, or no velicity at all
Answer:	Hello Blevok.The answer is NO. Only you can play with "ON" and "OFF".I saw this information with the program MIDI-OX (Midi-ox is free software to monitoring the input and output commands from the midi device that you are using). And the info is next:90 00 7F 1 C -1 Note ON, where 90 is ON, 00 Note C -1 (fundamental C less an Octave. the button (rectangle) at lower and left), 7F some information, 1 is the Channel 1 (where i was connected).80 00 7F 1 C -1 Note OFF, where 80 is OFF, 00 is the Note C -1 (fundamental C less an Octave. the button (rectangle) at lower and left 7C), 1 is the Channel 1Sample:With a VST drum, in this case the snare. You can play the snare associate a button. But only when you press the button the vst responds with the maximum volume of the snare.Slow or fast is the same response of the snare, maximum volume of the snare.You can't fixed the velocity because the firmware of this device doesn't provide this function.I hope that this answer help you.
Question:	Can you use it with Logic Pro x
Answer:	Hi Jose,AKAI support here! You will be able to use this with Logic Pro X with no issues. The APC Key 25 maps great with Ableton out of the box, but it still sends general MIDI messages that any other DAW uses. If you have any other questions, please feel free to email me directly at [email protected].
Question:	Does it work with djuced
Answer:	Yeah it does. It works with most daws but its not the best for perfomance its primarily suited for composition
Question:	Do i have to buy ableton live to make music or does it come with a version of ableton that isnt a trial version
Answer:	Don’t listen to that person that said Ableton isn’t for production. That’s exactly what Ableton is for. You’ll still have to use a full version of Ableton Lite, standard or Suite to get access to all the features you need.

Product features

Ultra-Portable Ableton Control

Dexterous, versatile, and powerful, APC mini is the most portable all-in-one USB powered plug-and-play Ableton controller solution with Akai Pro build quality crafted for on-the-go clip launching functionality. Engineered specifically for the mobile musician and the desktop producer, APC mini concentrates the essential features of the APC40 mkII, Akai Pro’s flagship Ableton controller, into a compact design that fits in your backpack. The result is a dynamic instrument that empowers you to make music with Ableton Live anywhere.

The Power of Clips

APC mini features an expanded 8x8 multicolor clip-launching grid that’s built for hands-on exploration: launch clips and create or perform your song from the ground up using 64 responsive triggers. Tri-color lighting provides visual feedback and displays three clip statuses loaded, playing, and recording so you can intelligently perform without looking at your computer. Plus for expanded creative potential, use the Shift button and directional arrows to manipulate the scope of the 8x8 grid.

Critical Mix Control

With APC mini, nine channel faders allow you to mix with a reinforced fader design. Don just limit yourself to volume, change channel-fader functionality with the dedicated buttons for volume, pan, sends and device control: fade clips in and out of the mix; pan instruments to the left, right or center; raise the level of reverb or other effects to create fluid transitions; open and close filters for lush sweeps; and much more. Additionally, each fader is completely assignable for fully-customized mixing and mapping control.

Seamless Integration

APC mini comes pre-mapped to Live for an instant performance and production setup. When APC mini is plugged into your computer, its hardware controls correspond 1 to 1 with Ableton Live’s interface-no additional configuring is required. Seeking a customised control layout? All of APC mini’s controls can be re-assigned on the fly for personalised setups that change with your performance or production style. Whether you are an electronic music artist and Live is your canvas, a DJ using Live for performance and real-time mixing, or a more traditional musician using Live on stage or in the studio, you will find the APC mini to be the intuitive, powerful instrument that directly links your inspiration with Ableton Live.

Ableton Live Lite

Ableton Live Lite delivers much of the functionality of Ableton Live and lets you spontaneously compose, record, remix, improvise and edit your musical ideas in a seamless audio/MIDI environment. Live brings your acoustic, electronic and virtual instruments as well as your digital audio recordings and MIDI sequences together in a single interface with unparalleled ease of use.

Hybrid 3.0

Hybrid 3.0 is the next generation in synthesis. This high-definition virtual synthesizer combines the coveted warmth of analogue synths with a full range of digital manipulation capabilities. The result is the best of both worlds a virtual instrument with a comprehensive set of adjustable parameters that can sound like a synth you remember or something no one has ever heard before.

Toolroom Artist Launch Packs

Toolroom Records artist launch packs bring you the coveted sounds of electronic music with a premium collection of sample packs, produced exclusively for Akai Professional from one of the world’s dance record labels. Including expertly curated instrumental loops, drumkits and one-shot samples.

Product description

Step Up to Standalone



From rich melodics and hard-hitting drums to the most infectious grooves, if you expect to get real professional production results you need next-generation tools that act as a natural extension of your creativity. Enter the MPC One, a Music Production Center engineered to enrich your workflow and create the ultimate standalone music production experience.



Full MPC Experience



From the bedroom beat maker to the studio music producer – MPC One features the same power as the MPC X, skillfully combined into a compact standalone desktop unit that easily handles the most demanding tasks. Edit and chop samples with hand gestures on the bright 7” touch screen color display. Express your ideas effortlessly and directly with the dedicated knobs and touch keys that eliminate cumbersome drop-down menus.



MPC Mainstays

Four touch sensitive knobs and a large data encoder seamlessly map to critical parameters. Sixteen velocity- and pressure-sensitive RBG beat pads deliver perfect response for full expressive range. MPC mainstays including Note Repeat, Full Level, 16 Levels and dedicated Transport Controls complete the MPC One’s arsenal of control options, providing complete production capability.



Studio Connectivity

The MPC One is ready to work with your current music studio equipment and will grow with you as your needs expand. Connect your USB MIDI keyboard controller (like the MPK Mini MKII) or line-level ¼-inch instruments. Control your MIDI devices (including synthesizers and drum machines) and your CV/Gate modules & racks. And there’s no need to worry about interconnectivity, since MPC One is ready to work right alongside professional music production gear.



MPC Software 2

Akai Professional’s reimagined MPC 2 Software drives MPC One in both standalone and MIDI controller modes. This is a cutting-edge music production suite combining 128-track sequencing capability, real-time time stretching, clip-launch functionality, advanced MIDI editing capability, VST compatibility in controller mode, operation as a standalone application on Mac & PC, advanced sampling & audio editing/recording functionality, seamless DAW integration, a redesigned GUI and much more.

• Beat Maker Essential - Standalone MPC, sampler, drum machine and MIDI controller (for the included MPC Software – Mac / PC) with the powerful MultiCore System from the MPC Live and MPC X
• Developed for the Modern Music Producer – 16 velocity sensitive RGB beat pads, 7” high-resolution multi-touch display, touch capacitive encoders and connectivity for USB MIDI keyboard controllers
• Connectivity - MIDI In / MIDI Out for control of synthesizers and drum machines; line inputs for recording / sampling; line outputs; headphone out; CV/Gate outputs for modular synth control
• On Demand Sound - Custom sample & loop library; exclusive standalone synth engines (Electric, Tubesynth and Bassline); premium AIR FX for mixing & mastering; network access for Splice Integration
• The MPC Experience – Compact desktop format; built in USB audio interface; USB Slots for thumb drives; SD card slot; MPC mainstays including Note Repeat, Full Level, 16 Levels and Transport Controls

Product features

MPC Software 2

Akai Professional’s MPC 2 Software drives MPC One in both standalone and controller modes. With 128-track sequencing, real-time time stretching, clip-launch functionality, audio tracks and much more, all the tools your production demands are included.

Packed with Content

Simplify your sample browsing and auditioning with on-board Splice integration in MPC One. There’s also a new drum sample & loop library that continues the MPC tradition of hard-hitting, industry-renowned drum sounds courtesy of the world’s leading sound designers.

• BEST SELLING – One of Japan's best selling musical Instrument Portable Synthesizer toys!
• FUN & EASY TO PLAY - You can create different sound and pitch by pressing down the middle part of the Otamatone. By sliding down your finger up and down, you can create higher and lower tone.
• Otamatone's face is made out of rubber, and by pushing his cheeks and making his mouth move around, the volume and the bass of the sound changes.
• When you press the cheek, mouth will open. It is a musical insturment, you can enjoy the sound.
• ※AAA Batteries ×3 (Battery NOT Included) ※Body Size: Approx 10.6" (27 cm)

User questions & answers

Question:	Besides the packaging, is this 2014 version exactly the same as prior years
Answer:	Typically Thailand or Indonesia. That is if you order from us, and not any of the others piggy backing on our listing.
Question:	What is different about this 2014 version compared to the others? Is this the deluxe otamatone
Answer:	I purchased it from the seller BSIRIBIZ.
Question:	How long is this
Answer:	Surprisingly loud for such an inexpensive instrument. Buy it! We enjoy it very much and its a really nice size.
Question:	What is the different between the Japanese and the English version? Is it the location where they ship them from
Answer:	I have a 2" and a 6" the smaller the frog the smaller the croak.....however I work with children and they LOVE them.

Product features

Japan's Favorite Musical Toy!

Innovative, unique, and now a popular toy worldwide, the Otamatone has earned high praise from fans and the toy industry alike, including the Japan Toy Association's grand prize Japanese Toy Award in their 'High Target' toy division.

Perfect for Kids, Teens, and Adults!

A perfect toy for lovers of all things cute, silly, and weird, the Otamatone also makes a great gag gift, and a unique and amusing gift for violinists and other musicians.

Fun & Easy to Play!

Simply press and slide fingers up and down the touch-sensitive stem to play different notes. You can also squeeze the Otamatone's "face" to create a "Wah" effect and shake the stem while playing a note to add Vibrato.

Product description

The Elektron Digitone Keys eight-voice polyphonic synthesizer keyboard is a performance machine that can usher in soundscapes of distant dreams and worlds previously out of reach. The 37-key velocity and pressure sensitive keyboard gives you a whole new level of expression and control over the Digitones intuitive sound engine. Multimap lets you configure and assign individual sounds per region, triggering sounds or patterns with the tap of a key, while the ability to use portamento and arpeggio flourishes with the freedom of three octaves. Twist through the looking glass and back with the flick of a wrist.

• 8-voice FM synthesizer with sequencer and keyboard with
• 37-note semi-weighted Fatar keybed with aftertouch
• Powerful Elektron sequencing with parameter locking
• 4 synth tracks, each with a 4-operator synth engine with 8 algorithms
• Built-in send effects include Panoramic Chorus, Saturator Delay, and Supervoid Reverb

Product features

Elektron Digitone Keys 37-key 8-voice Digital Synthesizer with Sequencer

This eight voice polyphonic synthesizer keyboard is a performance machine that can usher in soundscapes of distant dreams and worlds previously out of reach. The 37-key velocity and pressure sensitive keyboard with aftertouch gives you a whole new level of expression and control of the Digitone’s intuitive sound engine.

Synth Voice Features:

• 8 voice polyphony (4-part multitimbral)
• Multiple FM algorithms and operator harmonics
• 1 × multimode filter per voice
• 1 × base-width filter per voice
• 1 × overdrive per voice
• 2 × assignable LFO per voice
• Unison
• Portamento
• 2048 patch storage capacity on the +Drive

Sequencer Features:

• 4 × synth tracks / 4 × MIDI tracksA
• rpeggiator per synth trackP
• olyphonic sequencingI
• ndividual track lengthsP
• arameter locksM
• icro timingT
• rig conditionsS
• ound per step change1
• 28 × projects on the +Drive8
• × Banks 16 × patterns per project

Restrictions are for the dreamless

With this ready-to-go performance machine, curiosity is all you need. Wield the Digitone’s powerful sound engine with even more control with intuitive sound crafting, 37 keys, 8 voice polyphony, mod and pitch wheels, dedicated outputs per track, and brand new customizable controls. Multimap lets you configure and assign individual sounds per region, triggering sounds or patterns with the tap of a key, while the ability to use portamento and arpeggio flourishes with the freedom of three octaves. Twist through the looking glass and back with the flick of a wrist.

Sculpt your sound

With the Digitone’s powerful and easy to use FM engine you have Digitone dynamism in keyboard form. A variety of dedicated features put the power at your fingertips. Get maximum control out of the machine with eight new assignable knobs. Choose the function you want for each knob to tailor your Digitone Keys, and then let loose. The freedom to switch between tempestuous and serene soundscapes in an instant is laid out in front of you. In an Elektron first, the Digitone Keys helps you liberate your live show with a flexible mod and pitch wheel setup, allowing you to warp your sound to another world with multiple modulations.

Get connected

With separate outputs for each track, connecting to external effects mixers and pedals, audio interfaces, and modulation sources is easier than ever before. Pinpoint single Digitone Keys tracks to process independently from the rest of your sound.

Product description

Analog bass line synthesizer with VCO, vcf, 16-Step sequencer, distortion effects and 16-voice poly Chain.

• Amazing bass line synthesizer with true analog circuitry for bass and groove sounds
• Authentic reproduction of original circuitry with matched transistors
• Pure analog signal path based on legendary vco, VCF and VCA designs
• Sawtooth and square waveform vco with transistor wave-shaping circuitry
• Amazing 4-pole low-pass resonant filter with cut-off, resonance, envelope, decay and accent controls

User questions & answers

Question:	Does the td-3 support usb audio - or just midi data
Answer:	It won’t record midi data for the knobs
Question:	Does moving its filter cutoff knob send midi cc messages that can be recorded by a sequencer, received, & played by the td3 when the sequencer plays
Answer:	No
Question:	Do you need to connect this to a mac or pc to use it
Answer:	No - you can run it stand alone. It is a bit finicky and tricky to program patterns without the Behringer (included) sequencer programming tool, but if you're old school it works just like the TB 303 USED TO WORK. Step input, one note pitch and note value at a time. A pc/mac will make this easy - point and click. And then you DUMP what you created to the TD3 for playback.
Question:	Hello! Does it come with an international power supply? (110v-220v
Answer:	My TD-3 arrived with a power supply with an interchangeable U.S. plug adapter (100v-240v) so I think you can purchase different plug adapters elsewhere that are compatible with the power supply. Hope this helps.

Product features

TD-3-SR

• Amazing Bass Line synthesizer with true analog circuitry for bass and groove sounds
• Authentic reproduction of original circuitry with matched transistors
• Pure analog signal path based on legendary VCO, VCF and VCA designs
• Sawtooth and square waveform VCO with transistor wave-shaping circuitry
• Amazing 4-pole low-pass resonant filter with cut-off, resonance, envelope, decay and accent controls
• Easy-to-use 16-step sequencer with 7 tracks, each with 250 user patterns

Rock Right out-of-the Box!

Your TD-3-SR comes ready to rock, thanks to its default signal routing that doesn’t require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and ’90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history – or to design incredibly fat and original sounds that will make you a legend in your own right!

Versatile VCF

The very heart of TD-3-SR’s sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

Vintage Oscillator

TD-3-SR’s authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

Onboard Sequencer & Arpeggiator

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern. The onboard Arpeggiator features wide patterns you can build to provide a virtually-endless array of sound effects. Both the sequencer and arpeggiator in the TD-3-SR are fun, mesmerizing and totally addictive...

Kick it Into Distortion!

We saved one of the most exciting features for the last stage in the all-analog signal path – Distortion! When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the “envelope” to the max. The crowd won’t know what hit ‘em!

16-Note Poly Chain Ready

While it is a monophonic instrument (one note at a time), TD-3-SR’s 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony – plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

Controls & Connectivity

We just can’t help ourselves – like you, we're gear-heads, too. For those who want the numbers, TD-3-SR has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-SR’s tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices!

Unleash Your Imagination

When it comes to not just pushing envelopes but creating them, TD-3-SR gives your imagination its voice – and it’s so very affordable. When modern performance calls for classic analog sound – it calls for the Behringer TD-3-SR!

Visit your dealer to experience the stunning TD-3-SR or get yours online today. MUSIC never felt this good!

• Miniature stylus operated synthesizer is a recreation of the 1967 classic
• Choose from three different retro organ sounds, Optional vibrato effect
• Tuning knob on bottom allows you tune the Stylophone or do pitch-bend effects
• Built in speaker with volume control, Optional headphone jack

User questions & answers

Question:	Would you need any other equipment for this to make sound, or to just function like in the video
Answer:	Yes
Question:	Is the transition between notes portamento when sliding the stylus up the ribbon
Answer:	Dear Lyudmyla,Hello, this is Marimo from Hamee. Thank your for contacting us.This Otamatone comes with an English operation manuals and package is different from old version.Text on the package is written in English.Thank you and have a nice day!
Question:	is this an enemy to the brotherhood of steel
Answer:	Hello This is Rishika from Hamee, thank you for query. The product is approx.27 cm long.
Question:	I want to annoy my brother by giving his kid this thing. Will it drive my brother crazy? Would I be better off with a drum set
Answer:	Hello Jonis,This is Rishika from Hamee on Amazon.Thank you for Showing interest in our product. Otamatone English Version is Prepared by Hamee.There is no big difference in Japanese and English Version the product is same the only big difference is the manual and packaging that is is English for the US and other Country customers.So that , You get the product directly from Japan only with our special Translated English Version to understand and play the product with easy english Manual.Have a nice day!!

Product description

The Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive new live performance and production instrument is handcrafted in Asheville, NC and has been meticulously designed to provide musicians with a diverse array of creative tools to inspire new music, unique sound and endless sonic exploration. Mother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.

• Semi-modular design requires no patching for swift, inspired music creation
• Voltage controlled 32 step sequencer with 64 sequence locations
• Low Pass & High Pass Moog Ladder Filter (20Hz-20kHz) with voltage controlled resonance
• External audio input for processing outside sound sources
• Definitive Moog oscillator with Pulse and sawtooth wave outputs.EG output (0 to +7.5V)

User questions & answers

Question:	Can you attach a usb keyboard to this unit? can you connect a korg volca beats to it as well
Answer:	Maybe to omen ui....but mastered ui is a whole other level....that takes many many years of training my pupil!....not even goku the main man can sustain that forms power!
Question:	How do you program the sequencer part
Answer:	No belt clips.
Question:	Can I rack mount this unit with rack ears
Answer:	Most colors
Question:	Is this a good choice for me if I don't have a great knowledge of modular synthesizers, I mean something to use to learn
Answer:	Yes, of course you can! It’d be inconvenient if you couldn’t. So yes, you can plug your charger in it with the case still on.

Product features

Moog Mother-32

The Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive live performance and production instrument is handcrafted in Asheville, NC and has been meticulously designed to provide musicians with a diverse array of creative tools to inspire music, unique sound and endless sonic exploration.

Mother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.

Semi-Modular Simplicity

No cables are required for swift, inspired music creation and exploration. When you’re ready, enter the vast sonic realms of modular synthesis.

32-Note Step Sequencer

Craft ideas and perform in two unique sequencer modes with up to 64 on-board sequences for live performance.

Exponentially Expandable

Combine multiple Mother-32s to unlock realms of sound, imagination and creativity. Push even farther with complete Eurorack integration.

Tabletop Semi-Modular Synthesizer from Moog

Drive synchronized sound with Mother 32’s powerful step sequencer while utilizing its modular patchbay and assignable output to spawn a living, breathing organism with dynamic and modifiable sound processing. Patch multiple control and sound sources into Mother-32’s voltage controlled mixers and truly unlock the vast potential of this powerful instrument, or pull all of the patch cables, plug in a MIDI cable and simply drive your Mother-32 from any MIDI-equipped device.

The Mother-32 is secured in an extruded aluminum enclosure with wood sides, but can also easily be relocated to almost any Eurorack enclosure.

The Moog Mother-32 ships with the following items:

Mother-32 Analog Synthesizer, Power Supply, Owner’s Manual, Quick Start Guide, Patch Cables & Registration Card