12 best b y guitar stands

Product description

Our best seller combines our special formula velveteen rubber and thickest tubing. A great value for such a high quality stand! Features include a removable lower stepped yoke and a security strap on the upper yoke. This is a 2-Pack of XCG4's.

• Flush end caps to protect your instrument
• Security strap
• Black velveteen rubber
• Matte black powder coat finish
• 17mm tubing (top section)

User questions & answers

Question:	Does the bottom yoke have padding or is it just metal
Answer:	Try reattaching the white wire (if you have enough of it left, strip both ends, twist, optionally solder, and tape it). Mine did the same thing-- the wires were reversed from the instructions. Cutting the green wire got rid of the lines.
Question:	Just got mine. Is there a screw for arms supporting the bottom of the guitar? The arms can slip off
Answer:	Hello, friend! Thank you for your inquiry. The back up camera that outputs an analog video signal. If your factory navigation screen system supports analog signal input, the car rear view camera can be installed to vehicle with factory navigation screen with no back up camera.
Question:	It won't assemble, are there instructions available? The cradle wobbles and will not stay in place amd there's no way to keep the neck in place
Answer:	The car cam connector is 4 pin.
Question:	will this damage nitrocellulose-finish guitars
Answer:	The wire guage on this camera is very small, and the draw on the camera is certainly very low (especially because it does not have IR LEDs). Also, the reverse light/taillight circuits are already fuse protected and with much beefier wire. Considering the draw on this is probably ~500ma, you might want a 1.5A fuse, although because of the thin wire, this may or may not exceed the current capacity of the wire, thus defeating the purpose. If you are dead set on fusing this I would maybe start at 500ma and be prepared to move up to 1A? But fusing it is not needed.

Product features

On-Stage XCG4

A great value! On-Stage's combines a special formula velveteen rubber with extra thick tubing. It features a removable lower stepped yoke, security strap on the upper yoke, and adjustable height. Perfect for any guitar. Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Over the years, the brand has grown to include over 300 products in 8 different categories.

Product description

An Amazon Brand

• A-frame universal guitar stand for acoustic and electric guitars
• 3 adjustable-width settings to accommodate most guitar shapes
• Lightweight, durable, metal construction; no assembly needed
• Soft foam arms and back rest to protect your guitar
• Folds flat for convenient transport and storage; non-slip rubber feet

User questions & answers

Question:	is this stand high enough above the ground to keep the amp cable plugged into guitar
Answer:	Amazon's inventory is sold out currently. But, if ordered tonight, we ship it tomorrow and we can get it to you by Christmas from our direct inventory. Thank you
Question:	Could this stand be used to hold a guitar video game controller (e.g., guitar hero or rock band
Answer:	It says one size fits all. So it should be fine. My friend has a ford & it got perfectly!
Question:	How well does this hold electric guitars? I want to get my older brother a good quality stand for his without paying out of the butt
Answer:	These are universal fit steering wheel covers and should comfortably cover the wheel on virtually any vehicle (and shouldn't have any problem fitting on a 2010 Toyota Corolla).
Question:	Is this pet friendly? I have a couple cats and I need it to be stable
Answer:	Unfortuenly, we do not sell Rear Wheel Covers

Product features

Universal A-Frame Design

This guitar stand's universal A-frame design securely holds almost any guitar, acoustic or electric.

Three Width Settings

The stand's three width settings can be easily adjusted to accommodate different shapes, from small banjos to full-size guitars.

Padded Support, Nonslip Feet

With soft, foam padding in all the right places and non-slip rubber feet, the stand protects guitar surfaces and offers reliable support.

Folds for Storage

Lightweight yet durable, the metal guitar stand folds flat for compact storage and convenient transport.

Product description

Beautifully Crafted Floor Guitar Stand from Taylor

• Flo Guitar St- Danish Beechwood

User questions & answers

Question:

Do you happen to know whether a Taylor gs mini fits on this stand

Answer:

There is another Model of this Explorer Bike Rack made for bikes with disc brake. This model has a spring-loaded cantilever section hinged on the back end of the rack. This section helps hold small items onto the rack without the use of bungee cords. I think this is what the term "without springs" refers to. The regular Topeak Explorer Bike Rack do not have this cantilever section. Cargo on this rack needs to be secured down on the rack with bungee cords, rope, etc. A picture of this Topeak Explorer Bike Rack for bikes with disc-brake can be found on their product web site.

Product description

Gator Frameworks single guitar stand will keep your guitar out of the way of potential hazards that could result in damage to your precious instrument. The GFW-GTR-1000 single guitar stand features finish friendly rubberized cradle padding, a durable neck restraint that secures the guitar on the stand, as well as a robust, heavy-duty steel construction. The GFW-GTR-1000 also features removable red safety trim on each of the three stand feet. The Frameworks series of stands, including the GFW-GTR-1000 boasts a wide variety of innovative, reliable products designed to support your music! Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protector drum cases. It isn't hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Adjustable Guitar Stand Holds Acoustic or Electric Guitar
• Finish Friendly Rubberized Cradle Padding
• Durable Neck Restraint
• Red Safety Trim On Feet (Removable)
• Heavy Duty Steel Construction

User questions & answers

Question:	Is the bottom cradle foam covered
Answer:	Hello, Yes there is a layer of Foam on the bottom cradle. If you have any other questions, feel free to send them to [email protected]. Thanks!
Question:	Will this stand hold a V shape guitar such as eric peterson hunter V
Answer:	No, this particular stand does not hold any V shaped or explorer style guitar safely.
Question:	Is this safe for nitrocellulose finishes
Answer:	Just email gator, they said no. “Thanks for reaching out! Right now we do not recommend that instruments with lacquer or nitro finish are used on our stands for prolonged periods. We are having all of our rubbers tested to make sure we can recommend our stands for these finishes in the near future. If you have any more questions, please let us know! Best regards, Brianna Bullock Customer Care”
Question:	Is the cradle that holds the guitar supposed to spin freely? Every time I want to put my guitar in the stand, the cradle is not aligned properly
Answer:	Yes, every guitar stand is supposed to spin so they can accommodate to the guitar shape and the position you're putting it on.

Product features

Gator Frameworks Adjustable Guitar Stand; Holds Single Electric or Acoustic Guitar (GFW-GTR-1000)

The Gator Frameworks single guitar stand balances quality with cost, resulting in a guitar stand that is durable and affordable. The GFW-GTR-1000 from Gator’s Frameworks line of stands will hold a single electric or acoustic guitar. The heavy duty steel construction of the guitar stand can support the weight of your guitar without worry.

Product description

Fender deluxe hanging guitar stands conveniently showcase your acoustic, electric or bass guitar and are durable enough for road use. Along with being portable and efficient, the stand's padded yokes are perfect for guitars with sensitive finishes, such as nitrocellulose.

• Conveniently showcases your acoustic, electric or bass guitar
• Ideal for rounded and angular instrument shapes
• Height-adjustable yoke fits any headstock design and is easily adjustable to any scale length
• Yoke and support legs feature nitrocellulose-safe padding that won't harm instrument finishes
• Easily collapsible for convenient transport

User questions & answers

Question:	Will this stand work with a Gibson Flying V
Answer:	The guitar stand is approximately 41" tall, with 39" of hanging clearance for your instrument. The base of the stand is 12" wide and 13.5" deep.
Question:	Does this work the a Fender Uke
Answer:	I only knew what color to get because our friend had it. We ordered the mahogany. It is beautiful. It looks lighter online but I will try to attach a pic of my husband’s. Not sure I can attach a pic.
Question:	How does this work with offset guitars (i.e. Jazzmasters and Jaguars
Answer:	The stand has 48" of Clearance, so I would suggest measuring your double bass to see if it will fit.
Question:	Are we 100% sure about:Yoke and support legs feature nitrocellulose-safe padding that won't harm instrument finishes
Answer:	I have a Les Paul hanging on it and have noticed no ill effects. It's the same kind of hanger that is used for most wall mounts.

Product features

Fender Deluxe Hanging Guitar Stand, Black/Red

Fender deluxe hanging guitar stands conveniently showcase your acoustic, electric or bass guitar and are durable enough for road use. Along with being portable and efficient, the stand's padded yokes are perfect for guitars with sensitive finishes, such as nitrocellulose.

Product description

Ideal for any guitarist or bassist, this combination seat and guitar stand makes it easy to have a productive practice session or survive a long performance. Comfortably padded for long playing sessions, the seat and Fender 351 pick-shaped backrest with embroidered “F” logo are covered in woven gray tweed fabric. The flip-up/down instrument cradle—designed to fit most guitars and basses—displays your instrument securely while the integrated crossbar footrest accommodates almost any leg position. Designed for easy transport, the seat legs fold and the backrest is removable to make it even more compact when headed to a gig.

From the Manufacturer

Ideal for any guitarist or bassist, this combination seat and guitar stand makes it easy to have a productive practice session or survive a long performance. Comfortably padded for long playing sessions, the seat and Fender 351 pick-shaped backrest with embroidered “F” logo are covered in woven gray tweed fabric. The flip-up/down instrument cradle—designed to fit most guitars and basses—displays your instrument securely while the integrated crossbar footrest accommodates almost any leg position. Designed for easy transport, the seat legs fold and the backrest is removable to make it even more compact when headed to a gig.

• Collapsible-seat design with removable backrest
• Gray tweed seat and backrest fabric with black faux leather accents; non-slip rubber feet
• Embroidered “F” logo on 351 pick-shaped backrest
• Some assembly required; all hardware included
• Dimensions: Height: 44”

User questions & answers

Question:	Will this work for 5.6 feet tall person? I have seen other chairs and they are only good for 6+ feet tall people
Answer:	This chair fits me perfectly but i am a little over 6 feet tall. If I were 5.6 feet I would look at a chair that is adjustable. This one isn't.
Question:	What are the dimensions, i.e. seat height? adjustable? seat width and depth? weight capacity
Answer:	Dimensions: Height: 44”, Width: 14” Weight: 13.2 lbs; Weight Capacity: 300 lbs.
Question:	Seat size: what is the width and length of seat
Answer:	14”W X 10”L
Question:	Can anyone provide more measurements? Specifically seat height from floor, seat width and depth? Not overall measurements, we need seat cushion info
Answer:	Height from the floor to the top of the seat cushion is 27”.

Product description

Chroma cast products are designed by musicians for the active player. Chroma cast stands provide the best in affordability and quality. This a framed universal guitar stand folds for easy storage/travel and features Lightweight, durable, metal construction, rubber feet, soft foam stepped yoke, rubber back rest and secure lock system.

• A-Framed Universal guitar stand with Secure Lock, great for acoustic or electric guitars
• Lightweight, durable, metal construction with Rubber feet
• Folds flat in seconds for easy storage and travel
• Stepped yoke Securely fits electric and acoustic guitars
• Soft foam arms and rubber back rest to protect your guitar

User questions & answers

Question:	can this hold a full size acoustic bass
Answer:	Graig, not sure I would recommend for the Jag body shape. I use mine with a Les Paul, a Gibson 335, Fender Tele all fine but when I place the Strat on it I get pretty nervous. If you don't get the Strat "just right" it seems a bit unstable. Overall the stand is OK (I got it mainly because it folds nicely into on of my gear cases) but I prefer my other stands which supports neck, YMMV. Just my POV, hope it is helpful.
Question:	How much weight can this stand handle
Answer:	I have a Ukulele and it will not fit in it. I don't think the mandolins were fit. The items would have to be as tall as a guitar. I hope that helped.
Question:	Would a ukulele fit for this stand
Answer:	There are some foam pieces in the bottom of the stand than can be adjusted to seat the guitars at an angle, but I have mine set up so that they basically sit straight (very slight angle).
Question:	Could this stand be used for as banjo
Answer:	Yes...the bottom of the case has adjustable cushions/spacers to fit any size guitar. I move them around depending on if I'm using electrics or acoustics. :-)

Product features

ChromaCast universal folding guitar stands

ChromaCast a-frame universal guitar stands fold for easy storage and travel. They feature lightweight, durable, metal construction, rubber feet, soft foam stepped yoke, rubber back rest and a secure lock system.

Specs

• Universal guitar stand with Secure Lock System
• Lightweight, durable, metal construction with Rubber feet
• Folds flat in seconds for easy storage and travel
• Soft stepped yoke securely fits electric and acoustic guitars
• Rubber back rest to protect your guitar

Secure Lock System

The secure lock system helps keep your guitar stand in place to avoid any accidental spills.

Easily Foldable

These foldable stands are easy to transport or store and take up almost no room. That leaves more room for gear!

Soft stepped yoke

The stepped yoke is covered with soft padding which helps make sure your guitar wont go anywhere!

Rubber back rest

The rubber back rest will prevent your guitar from sliding around while mounted on the ChromaCast folding guitar stand.

Product description

Rok-It collapsible, folding guitar rack designed to hold 3x electric or acoustic guitars. Foam padded support to protect guitar. Safe for standard polyeurethane finishes, not recommended for vintage/lacquer finishes

• Designed to Hold up to Acoustic or Electric Guitars
• Black Powder Coated Finish
• Heavy Duty Steel Construction
• Foam Padding Protects Instruments (Safe for standard polyeurethane finishes, not recommended for vintage/lacquer finishes)
• Convenient Folding Design

User questions & answers

Question:	Can you fit 3 acoustics
Answer:	Yes, it fits 3 acoustics.
Question:	What are the dimensions (tall, wide, deep
Answer:	26 inches tall by 17 inches wide by 22 inches deep
Question:	Can this stand hold a baritone ukulele
Answer:	Hello, While we have not tested this, we are going to say no. The Distance from the foamed body cradle to the foamed neck cradle is 24". Typically this is longer than most Baritone Ukes. If you have any questions, please feel free to reach out to us at [email protected]. Thanks!
Question:	What are the dimensions of the assemble five (5) guitar stand
Answer:	It’s as described on the AD: Product information 5 Guitars. Item Weight 7.13 pounds. Product Dimensions 24 x 26.5 x 21.5 inches.

Product features

Rack Style Guitar Stand for (3) Guitars

Designed to hold up to Guitars. Compatible with Acoustic, Electric and Bass guitars.

Foam Padded Cradle

Thick padded foam protects from scratches and provides a soft cushion for for your guitar. (Not recommended for vintage/lacquer finishes)

Collapsible Design

Racks folds up for compact storage and easy transportation when not in use.

Heavy-Duty Steel Construction

Made from durable and lightweight steel construction with rubber gripped feet for stability.

Rok-It Multi Guitar Stand Rack with Folding Design; Holds up to 3 Electric or Acoustic Guitars

Rok-It collapsible, folding guitar rack designed to hold 3x electric or acoustic guitars. Foam padded support to protect guitar. Safe for standard polyeurethane finishes, not recommended for vintage/lacquer finishes

• ** MAKE Sure to watch the Video on the left. Hola! Music Professional Tripod Universal Guitar Stand - Fits Acoustic, Classical, Electric, Bass Guitars, Mandolins, Banjos, Ukuleles and other stringed Instruments - Black
• Height-adjustable - fits most guitar shapes and is easily adjustable to any scale length
• Yoke and neck rest feature nitrocellulose-safe padding that won't harm instrument finishes
• Easily collapsible for convenient transport and storage
• Don't miss!! Full description, images and specifications down the page. Hola! Music guarantees quality and affordability. Hola! - Say Hello to Music!

User questions & answers

Question:	Hi - Any noticeable paint smell on the metal or chemical smell to the plastic/rubber parts
Answer:	I didn't notice any smell. I didn't put my nose inches away, but if it smelled I would have noticed.
Question:	How far apart are the two arms of the lower support? I have a unique instrument that requires are certain minimum width there. Thanks
Answer:	A problem I had is that the lower support is either flat or will sometimes fold inward when I picked the guitar up. I only use that stand when I have several of my guitars out or have friends over. When I perform I put my guitar in its case between sets. I recommend the One Stage’ stand.
Question:	I have a heave 6string bass guitar. Think it wont topple over in this
Answer:	I am sure it would be safe. I don't have a bass, but all my electric and acoustics are very stable in it.
Question:	If it is pushed up against the wall, how deep is the foot print? also, the dimension of the upright from the wall as well
Answer:	I think you will need to look for another product; the orientation of the stand is such that the guitar, facing outward, makes the 3 leg base have a leg facing perpendicular to wall. In that orientation it is 22 inches deep for all three legs of the triangular base.

• 🎁2020 New Release Classical Wooden Guitar Stand: Made of solid Zebra Wood, this guitar holder stand brings an excellent hand feel rather than other metal stands. The smooth edges make you feel more classy and aesthetic and protect the surface of your favorite guitar from scratches, great to hold a guitar for displaying and picking the guitar up to practice any time.
• 🎁Universal Guitar Stand: The cradle arms of this A-Frame guitar stand could be adjusted in width range from 7" to 9" to easily accommodate multiple kinds of guitars and even other instruments. This basic guitar stand works like not only a full-size acoustic guitar stand, electric guitar stand, bass stand, ukulele stand, kid guitar stand but also as a cello stand(1/8-3/4 Cello), banjo stand, french horn stand and more.
• 🎁Sturdy Construction: Features secure lock system and non-slip rubber feet, the small guitar stand can limit the distance between two legs and keep your guitar stand firmly on the floor with no sliding or tipping. It is secure to use in multiple areas like concrete, carpeting, linoleum, and other places. A best choice for guitar accessories.
• 🎁Instrument Safe and Dependable: Along with arms and back of this electric guitar stand, all the points where contact to the guitar finish are covered with thick soft foam padding to protect from marks and scuffs. Feature gentle and reliable foam rests, the floor guitar stand is ideal for all-purpose performance, such as the concert, tour, music festival, party, ceremony, talent show.
• 🎁Folding Guitar Stand: With the attached screwdriver, you can easily assemble it within 5 minutes and fold flat in seconds when not in use. The low profile foldable guitar stand is lightweight and compact, fit right into a gig bag, perfect for travel and home use. An ideal gift and holiday present choice for son, daughter, husband, wife, girlfriend, boyfriend, grandparents, parents and friends on Black Friday, Cyber Monday, Christmas, Thanksgiving.

Product features

Where you keep your favorite guitars?

Lay on the floor, leaning precariously against a chair, hiding in the back of a closet, or on top of a shelf?

Now you’ll get the most proper thing to place it ——Snigjat Wood Guitar Floor Stand

Real Hardwood Guitar Stand

Made of the toughest Zebra hardwood, You will fall in love with this flat guitar stand at first glance by its fascinating natural wood grain. Combine with classy and durable, it would rather be an artwork than a guitar stand.

Tiger Grain Wood

With fascinating wood grain, just like tiger grain, each guitar stand is unique and extraordinary. This is a crafted guitar stand for your guitar. Take it in your home, you will find your home warmer and full of artistic flavor.

Padded Foam Protection

The additional soft foam padding at the arms and back rest which connect to the guitar will help to keep the instrument safe while protecting the guitar finish from ruining.

Adjustable Guitar Stand

This A-frame guitar stand can adjust the leg width to hold most of the guitar, works well as universal guitar stand, mini acoustic guitar stand, stratocaster guitar stand, bass stand, junior guitar stand as well as a kids guitar stand, also fits for other instruments like mandolin, banjo, ukulele, 1/8-3/4 cello, violin, tamboura, balalaika, dutar.

Easy to Assemble and Store

The travel guitar stand is easy to set up in 5 minutes, it could be folded up flat and fit easily into gig case.

A Perfect Gift for You on Black Friday, Cyber Monday, Christmas, Thanksgiving!

1 x Vertical tube

2 x Bottom tube

2 x Placement rod

2 x Screw cap

2 x Screw

1 x Screwdriver

Lightweight yet durable, the traveling guitar stand is attractive and reliable, perfect for guitarist & bass player keeping his instrument accessible at any time or displaying guitars in the living room, music room, studio or store. An ideal birthday gift, holiday present and anniversary gift for musicians, son, daughter, husband, wife, girlfriend, boyfriend, grandparents, parents and friends on birthday, housewarming, Valentine's Day, Mother’s Day, Father’s Day, Prime Day, Black Friday, Cyber Monday, Halloween, Thanksgiving, Christmas.

• Deep cradle design that prevents the guitar from being improperly placed in its hanger
• Great for guitars which have a headstock with single or uneven heels
• Yoke pivots to cradle the guitar's headstock
• Wood block is made of real hardwood

User questions & answers

Question:	Would a full size dreadnought like an Fg700 have clearance issues at the back with the wall? Depth is about 4.5 inches
Answer:	These are oak hangers. They will be very similar to the photo in tone and grain with some slight differences.
Question:	Will it hold the guitars in the even of a medium size earthquake? I’m in California
Answer:	no
Question:	my husbands bass guitar is pretty heavy - though I don't have the exact weight. Is there a weight limit for the hanger? thank you
Answer:	They are a fixed width. If your fret board is over 2" then these will not fit.
Question:	what are the dimensions of this item
Answer:	It holds my Yamaha classical no problem. Best guitar mount I have used.

Product features

U" Shaped Padded Hook

The "U" shaped yoke cradle securely holds the guitar. The guitar must be physically lifted up 2 inches and brought forward to be taken out of the hanger. Customers have called to say that their guitars stayed in the hanger, on the wall, even through earthquakes.

Pivoting Yoke

Yoke cradle pivots to adjust to varying headstock shapes. Yoke cradle is covered with a high-density rubber to protect your guitar's finish.

Trusted

Our hangers have been trusted globally by over 10 million guitars. They're being used in homes, guitar shops, museums, and trade show booths around the world.

Our Team

String Swing is a family owned business out of the United States and has been making instrument displays for over 30 years. All of our products are manufactured and assembled in-house and are 100% USA made. Thanks for supporting our family owned business!

• Don't miss the Video on the left for full description and specifications.
• Fits all sizes of Classical and Acoustic guitars.
• Soft silicon cushion on all contact points and Non-slip silicon feet for extra stability.
• Only 12 x 6 when folded, perfect for backpacks or gig bags. Weighs only 0.9 lbs
• Hola! Music guarantees quality and affordability. Hola! - Say Hello to Music!

User questions & answers

Question:	Looking for a bandura stand
Answer:	Buy it
Question:	How stable is the stand on carpet
Answer:	It's a pretty good stand for carpet compared to the normal ones that are made with bars and only have 3 points of contact.
Question:	Will this work with the guitar in a hard case
Answer:	It will hold an electric hard case but my acoustic case will not fit.
Question:	Will it hold a 12 string breadlove
Answer:	It will hold something up to 5 1/8" deep / thick.