10 best guitar parts necks
The neck of an electric guitar is a crucial component that plays a significant role in the instrument's playability and tone. Here is what you need to know about guitar necks:
Materials: Guitar necks are typically made from various types of wood, with the most common choices being maple and mahogany. Maple necks are known for their bright and snappy tones, while mahogany necks tend to produce warmer and richer tones.
Neck Shape: Guitar necks come in various shapes, such as C-shape, V-shape, U-shape, and more. The shape of the neck affects how it feels in your hand and can impact your playing style.
Fingerboard: The fingerboard, also known as the fretboard, is attached to the neck. It is usually made of a different type of wood than the neck itself. Rosewood and ebony are common choices for fingerboards. The fingerboard features frets, which are the metal strips embedded in the wood to produce different pitches when you press the strings against them.
Scale Length: The scale length is the distance between the nut (at the top of the neck) and the bridge of the guitar.Electric guitars typically have scale lengths ranging from 24 to 25.5 inches. The scale length affects the tension and feel of the strings.
Number of Frets: The number of frets on a guitar neck can vary, but most electric guitars have 21, 22, or 24 frets. More frets allow for higher notes to be played.
Inlays: Inlays are decorative markers on the fingerboard that help players identify specific fret positions. They can be made of materials like mother-of-pearl or synthetic materials and come in various shapes and designs.
Truss Rod: Inside the neck, there is often a truss rod, which is an adjustable metal rod. This rod allows you to adjust the curvature or "relief" of the neck, helping you control the action and playability of the guitar.
Nut: The nut is a small piece at the top of the neck that guides the strings to their respective tuning pegs. It also helps determine the spacing of the strings and their height above the fretboard.
Headstock: The headstock is the top part of the neck that holds the tuning pegs. It may have a unique shape and design depending on the guitar's brand and model.
Finish: The neck can have different finishes, such as gloss or satin. The choice of finish affects the feel of the neck and the player's grip.
Neck Joints: Electric guitars can have various types of neck joints, including bolt-on, set neck, and neck-through construction. The neck joint influences how the neck is attached to the guitar body, which can impact sustain and accessibility to higher frets.
In summary, the neck of an electric guitar is a vital component that contributes to the instrument's playability, tone, and overall feel. Different neck materials, shapes, and features cater to a wide range of playing styles and preferences, allowing musicians to find the perfect guitar neck for their needs.
Below you can find our editor's choice of the best guitar parts necks on the market
Electric Guitar Neck DIY For Gibson Les Paul LP Guitars Parts Replace 22 Frets (MI2670)
Kmise
- 1. Designed for LP electric guitar neck replacement with a natural finish and white trapezoid inlay.
- 2. Well-constructed guitar neck nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing.
- 3. The beveled fret ends and rolled edges of the guitar neck give you a nice smooth touch.
- 4. Two-way adjustable truss rod helps stabilize the performance of your guitar neck that is susceptible to humidity and tension from guitar strings
- 5.Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you purchase the guitar neck.
User questions & answers
| Question: | What is the depth of the neck on the mi2670 model. as in how deep would the cavity need to be |
| Answer: | 8+4: 8 analog Coax input and plus 4 IP camera input or 12 channel total in all IP cameras 16+8: 16 analog Coax input and plus 8 Ip Camera input or 24 channel total all in IP cameras Hope it helps. - Q1C1 |
| Question: | What is the degree for angle of the necks teno |
| Answer: | Yes, you can |
| Question: | Is this a 50s style neck |
| Answer: | Check product listings only support is through sellers |
| Question: | Will it fit epiphone les paul special ii afd |
| Answer: | It should. It's supporting my old 450 TVL cameras. |
Fender Standard Guitar Neck Plate
Fender
Product description
Standard Guitar Neck Plate. Genuine Fender 4-hole chrome neckplate with a tilt adjustment hole. The neck plate features "Fender Corona, California" engraved. Includes 4 mounting screws. Fender part: 099-1445-100
- Standard Guitar Neck Plate
- Genuine Fender 4-hole chrome neckplate with a tilt adjustment hole
- The neck plate features "Fender Corona, California" engraved
- Includes 4 mounting screws
- Fender part: 099-1445-100 Genuine Fender 4-hole chrome neckplate with a tilt adjustment hole
User questions & answers
| Question: | will it fit a fender bass |
| Answer: | I built a Strat using a swamp ash body and all rosewood neck - no skunk stripe. I was going for that 50's look/sound. I went with the '59's to help that process along. They sound really nice on a clean setting, that's what their for - like what you would expect for a little Texas blues, but I like a little dirt too = distortion and that's where these fall short. They're not designed for that so much. I left the Mid & Neck alone but I changed out my bridge to a Seymour Duncan SSL-5 and never looked back! But I'm playing Priest/Maiden/Rush. For you they should be a nice set - IF you need a little dirt - I would recommend a Seymour Duncan quarter Pounder, OR The SSL-3 in the bridge to get you up & over. You can go on his site and do a listen demo, Good luck:) |
| Question: | which neck plate fits a 2005 standard strat? The Fender or the F |
| Answer: | If your guitar uses single coil pickups it will fit perfectly, also they sound amazing!! |
| Question: | how is it?Does it work well |
| Answer: | They will fit well. May need to use the old screws depending on what’s included. Don’t remember but sometimes the screw heads have a different shape. These are fairly bright sounding pickups. In general I prefer the sound of the less expensive fender tex mex pickups, but we all have different preferences. |
| Question: | Is this a steel (heavy) neck plate or one of the newer, lightweight (aluminum?) products |
| Answer: | Yes, I actually put mine in a $100 fender Starcastor and they work brilliantly. Also, it may be a bit pricy, but if you don't know how to wire them up I would suggest going to a music store like a Sam Ash or a guitar center to get them installed. |
Alnicov Electric Guitar Neck DIY For Gibson LP Guitars Parts Replacement 22 Fret Mahogany Neck Rosewood Fretboard with White Trapezoid Dots Inlay Natural
- ♪ 100% BRAND NEW: This electric guitar neck replacement is new and good for gibson les paul junior sg neck replacement.
- ♪ DELUXE STYLISH APPEARENCE: Beautiful mahogany gloss and white trapezoid inlay help you to distinguish the corresponding fret easily. The neck is perfectly straight and polished.
- ♪ HIGH QUALITY WOOD: Neck is made of Mahogany Wood. Fretboard is made of Rosewood. These premium wood make the sound brighter and louder, ensuring outstanding sustain.
- ♪ EASY TO INSTALL: There are 10mm diameter head machine peg holes for tuner installation. It will be very easy for you to install. Truss rod has been installed at the headstock, you can adjust it according to your need.
- ♪ 100% CUSTOMER SATISFACTION GUARANTEE: If you have any question, pls feel free to contact us. We will reply as soon as possible.
User questions & answers
| Question: | Will this fit a les paul jr double cut |
| Answer: | I do not know this technical questions answer I just use it |
| Question: | How is the quality? Is it fair at price |
| Answer: | Don't know about that. |
| Question: | Is the color of the guitar neck shown as picture |
| Answer: | No is on one time is conectes to the power source, really good product , has given to my a lot of money |
| Question: | Is the guitar neck suitable for LP |
| Answer: | Yes, you can use any brand HDCVI/AHD/TVI/CVBS video inputs camera up to 5MP; and/or Onvif 2 compliant IP camera up to 6MP. |
Music Nomad Truss Rod Neck Relief Measure and Adjust Kit for Taylor Guitars
Product description
Being able to measure and adjust your Taylor Guitar's neck relief is a critical step in the setup process and will improve your playability and sound. Music Nomad is making it real easy for anyone to perform this task with our Measure and Adjust kits. The Precision Truss Rod Gauge comes equipped with the 3 most common relief measurements for Electric, Acoustic, Classical and Bass Guitars (.006”, .008”, .010”). For Taylor, use the .008" Gauge along with the clever Pick Capo and follow the instructions printed right on the gauge. When you are ready to adjust, Music Nomad's 1/4" Premium Truss Rod Wrench is made custom to fit the Taylor Guitars truss rod nut that you adjust at the headstock. Equipped with a handy magnetic screwdriver on one end remove the tiny truss rod screws, and then turn it around and use the wrench to properly adjust your truss rod. Our ergonomic handle and rubber protective bumper gives you the comfort around your prized instrument. Keep your Gauge close by as it works on any Guitar or Bass and the 1/4" Wrench will work on other Guitar brands that require that size. Make sure you check out all Music Nomad's Precision Gauges and Tools used in the setup process. That's Music Nomad quality – raising the bar in equipment care.
- Everything you Need to Measure and Adjust your Neck Relief on all Taylor Guitars Models that Adjust at the Headstock but not Models that Adjust in Soundhole (Big Baby and Nylon Models Pre-2012)
- Comes with a Precision Truss Rod Gauge, Pick Capo, 1/4" Truss Rod Wrench with a screwdriver
- Precision Stainless Steel Gauge Includes the 3 Most Common Truss Rod Neck Relief Measurements (.006", .008", .010") for Electric, Acoustic, Classical & Bass Guitars with Easy to Follow Instructions Printed Right on the Handle & an Innovative Pick Capo to Assist
- Premium Truss Rod Wrench - 1/4" with Strong Carbon Steel Construction & Ergonomic Comfort Handle features a Magnetized Screwdriver for the Small Truss Rod Cover Screws and a Protective Bumper to Protect the Headstock
- These products are part of our KEEP IT SIMPLE, SETUP (KISS) Method using our Precision Gauges & Tool Sets combined with step-by-step general guidelines anybody can follow and setup their guitar to play and sound great.
Alnicov Electric Guitar Neck Maple Head Rosewood Fretboard 24 Fret for IBZ Parts Replacement Black
- ♪100% BRAND NEW: This electric guitar neck replacement is new and could be used as Ibanez neck replacement. DIY electric guitar, spare parts for guitarists and amateurs.
- ♪DELUXE STYLISH APPEARENCE: Beautiful rosewood gloss and orange dots inlay help us to distinguish the corresponding fret easily. The neck is perfectly straight, smooth and polished.
- ♪HIGH QUALITY WOOD: Neck is made of high-quality Maple Wood, which is anti-rust, eco-friendly, odorless, sturdy and durable to use. Fretboard is made of Rosewood. These premium wood make the sound brighter and louder, ensuring outstanding sustain.
- ♪EASY TO INSTALL: There are 10mm diameter head machine peg holes for tuner installation. It will be very easy for you to install.
- ♪100% CUSTOMER SATISFACTION GUARANTEE: If you have any question, pls feel free to contact us. We will reply as soon as possible.
User questions & answers
| Question: | Will this work for a custom Stratocaster body build |
| Answer: | nice neck but experience in lutherie required, if you would need to take it in to a shop for fitting and setup it would cost more than to purchase a new epiphone LP special, if you can DIY check all measurements, heel depth and width for sure, all hardware requirements salvageable from the old neck? so to some it up you can't drill some holes and screw it on... |
| Question: | Will this guitar neck fit IBZ |
| Answer: | This cable only provides power to dash cam. Your issues may be from something else. Make sure you install memory card in dash cam camera. The memory card may need to be formatted when used for first time. |
| Question: | Will this fit a Yamaha rgz? Are there major bridge adjustments if adding frets |
| Answer: | I think a cigarette lighter or usb charger will work |
| Question: | Is this 22 frets or 24 frets? product info says 22 frets title says 24 frets |
| Answer: | Yes, Mini DVR supports 100V-220V voltage. You can use it for global travel. |
Alnicov Electric Guitar Neck DIY For Gibson LP Guitars Parts Replacement 22 Fret Mahogany Neck Maple Fretboard with White Trapezoid Dots Inlay Natural
- 100% BRAND NEW: This electric guitar neck replacement is new and good for gibson les paul junior sg neck replacement.
- ELUXE STYLISH APPEARENCE: Beautiful mahogany gloss and white trapezoid inlay help you to distinguish the corresponding fret easily. The neck is perfectly straight and polished.
- HIGH QUALITY WOOD: Neck is made of Mahogany Wood. Fretboard is made of Rosewood. These premium wood make the sound brighter and louder, ensuring outstanding sustain.
- EASY TO INSTALL: There are 10mm diameter head machine peg holes for tuner installation. It will be very easy for you to install. Truss rod has been installed at the headstock, you can adjust it according to your need.
- 100% CUSTOMER SATISFACTION GUARANTEE: If you have any question, pls feel free to contact us. We will reply as soon as possible.
User questions & answers
| Question: | What is scale length |
| Answer: | I ordered one for my LP guitar. Fit well. |
| Question: | there seems to be a disrcempency you say mahogeny yet it says maple in the discription which is it |
| Answer: | three quarters of an inch |
| Question: | What are " trapezoid dots |
| Answer: | It’s about 8 degrees |
| Question: | can this neck be bolted on |
| Answer: | I’m no expert but I would venture to say yes. If you’re looking to replicate a 50’ look this neck could work. The headstock closely resembles the Gibson style which you would find on a 50’s era as well as current models. |
Fender Neck Mounting Screws - Chrome
Fender
- Package contains four (8 X 1-3/4") neck mounting screws
- Used on most Fender guitars and basses
- Some of our most requested replacement screws
- Made for Fender and used on a variety of vintage and contemporary models
- Chrome
User questions & answers
| Question: | will they work on a precision bass neck |
| Answer: | Good quality. I recommend it to all my friends. |
| Question: | Do these screws fit Squire strats |
| Answer: | Yes, nice color. Great for my guitar. |
Fender 4 Screw Neck Plate Gold
Fender
- Fender Plain Gold Guitar Neck Plate
- Genuine Fender Part # 099-1447-200
- Neck Mounting Screws Included
User questions & answers
| Question: | Does this come with screws |
| Answer: | Yes. I make it. |
| Question: | Will it fit a Fender Precision Bass |
| Answer: | Maybe. you need to know the scale length. I swapped out a 24 fret neck with a 24 fret neck @ 25.5 inch scale length. |
| Question: | Whats the distance of the holes |
| Answer: | 24 fret |
| Question: | Does this come with screws or not. It says that does and that it does not |
| Answer: | I used the one I bought on a Double Cutaway LP . you should know and understand the difference between bolt on and glued on. If the pocket on the body is flat it's a bolt on, if it is slotted its glue in. This particular check is bolt on. Most Led Paul bodies have glue in, but a Double Cutaway or an SG often has bolt on. Hope this helps. |
TIHOOD 3PCS Electric Guitar Neck Plate with Crews, Guitar Neck Plate for Replacement Electric Guitar Part
- The neck joint plate is made of metal and the protect plate is made of plastic.
- Package include 3pcs neck plate with crews.
- Use for electric guitar replacement.
- Fender Size:64mm x 51mm/2.5"x2". The screw hole center size:51mm x 38mm/2"x1.49".
- Make your guitar stand out with this neck plate.
User questions & answers
| Question: | can i get a neck plate that is 64mmx46\47mm chrome |
| Answer: | yes |
| Question: | will this work for a Ibanez RGD |
| Answer: | Yes it does. Mine looks terrible because I did a bad job at making the body, but yes the neck works great. |
Yinfente Guitar Neck 22 fret Unfinished Mahogany Rosewood Fretboard Replacement Guitar Neck Guitar Parts
- Mahogany wood Guitar Neck, Rosewood Fretboard, Nice inlay
- Truss rod at headstock, Black headstock , Normal nut, 42mm nut width
- set in style, white fretboard binding.
- Package list: 1*guitar neck
User questions & answers
| Question: | Is this fit for a les paul guitar |
| Answer: | Yes. These screws will fit your squire |
| Question: | Will this fit a Gibson es |
| Answer: | 25.5 in |
| Question: | What is the size (diameter) of the tuning machines holes |
| Answer: | It is maple not sure on the finger board |
| Question: | Can I get this neck with a full heel. Without the tenon cut |
| Answer: | dont know |
Latest Reviews
View all
Axe Deodorants For Women
- Updated: 10.05.2023
- Read reviews
Android Streaming Boxes
- Updated: 05.05.2023
- Read reviews
Foods Mayonnaise Squeezes
- Updated: 09.02.2023
- Read reviews
Iphone Charging Dock For Multiple Devices
- Updated: 04.03.2023
- Read reviews
Buy Epsom Salts
- Updated: 20.03.2023
- Read reviews