10 best 8 guitar speaker

Product description

The Eight 15 is ideal for upgrading your bedroom blaster with authentic British tone. Well-balanced mids and highs complement a surprisingly meaty bottom end - it's just about the biggest sounding eight inch speaker we've ever heard! SPECIFICATIONS Power rating: 20W ; Nominal impedance: 8 ohm ; Sensitivity: 95 dB ; Frequency range: 100 - 5000 Hz ; Unit weight: 2.2 lb. Shipping weight: 3.1 lb.

• 100% Celestion tone crammed into an 8" guitar speaker
• Well-balanced midst and highs complement a surprisingly meaty bottom end
• Perfect upgrade for compact recording amps and practice amps
• Ceramic magnet 8" guitar speaker, 15-watts power handling
• Warranty for 7 years

User questions & answers

Question:	Would this be good for a Roland Cube 20GX
Answer:	I don't know the Roland Cube specs, it worked just fine in my blackstar HT-1.
Question:	How would this speaker change the clean tones in a 1978 silver face fender champ? i want the champ to remain chimey, like a fender should be
Answer:	As is should. Bought this to put in a mojotone kit. Made it sound too British IMHO. Should have gotten the 4ohm. It is better matched to the amp which specs out a 3.2 ohm speaker. Considering a few alternatives. There is an MOJOTONE AMERICAN VINTAGE AV8C 8" SPEAKER 4 OHM 15W that I am considering. Weber makes a 3.2 ohm I believe. If you get the celestian get the 4 ohm.
Question:	Is the speaker supposed to come with paperwork? I just received my pakage and it looks as if it may be an open box item
Answer:	I had no paperwork. You hook up positive to + and negative to - Thats all there is to it. Dont over tighten the 4 screws that hold the speaker in place... can damage the cone.
Question:	Just grabbed a peavey royal 8...is this a good choice over stock speaker? or better of jensen mod
Answer:	Couldn’t find any thing on the (special) 8” Peavey speaker, it all comes down to a matter of taste, and price! Jensen is very proud of their speakers and are priced to match, but does that equate to a better sound? I am sold on the Celestion contender, it sounds amazing and can’t be beat for under $50!

Product description

Eminence Patriot 820H 8" Guitar Speaker with Hemp Cone 20 Watts at 4 Ohms

• 4 ohm hemp cone speaker with rich warm full bodied tone
• Fat punchy lows smooth and defined highs and a nice break up
• Prominent mids but with a warm smooth texture
• 4 ohm Hemp Cone speaker with rich, warm, full bodied tone

User questions & answers

Question:	So, with post holes relocated, does this fit into a Tweed Fender Champ, not hitting transformers / chassis
Answer:	Ok, I think I know your delema. I just installed this speaker into a Marshall DSL-20. Not much room to work with. I replaced the tubes as well. I found that taking the speaker out carefully works and the patriot should go back in very nicely since there are eight holes. If you're replacing tubes as well, put them in first. When I put the speaker in there was barely enough room to fit a piece of paper pad cardboard between the tube and speaker. Good luck I hope this helps. Oh, and video and take pics of your work as you do it. That helped me alot
Question:	Will the 6” speaker work in a roland cube street, specs on the cube street speakers says
Answer:	Yes, it will, but make sure you get the same impedance as the 6.5" in the Roland - is it 4 ohm or 8 ohm? Jeff Trax Audio
Question:	Will this eminence patriot 620h 6" / 4 ohm guitar speaker work in a roland jc 22 amplifier (which comes with a pair of 4 ohm / 6" speakers
Answer:	These are actually 6.5" in diameter - so if the Roland is also a 6.5",then it would work. JEff Trax AUdio

Product features

Eminence Patriot 820H

Featuring a hemp cone, 1" voice coil and lightweight 15 oz. ceramic magnet, the Eminence Patriot 820H Hemp Cone 8" guitar speaker offers a rich, warm, full bodied tone that emulates a larger cone, with fat, punchy lows, smooth, but defined highs and a nice break up. The 4 ohm 820H also offers prominent mids, but with a warm, smooth texture.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

Celestion G12M Heritage Guitar Speaker, 8 Ohm

• Faithful recreation of the original 20 watt ceramic magnet Greenback speaker.
• 12 inch electric guitar speaker available in 8 or 16 ohms.

User questions & answers

Question:	Is the G12M Heritage made in England or China
Answer:	Thank you for contacting Parts Express. The product is made in England. Sincerely, Customer Service Team
Question:	where do you place this speaker, in what amp case or how does it work
Answer:	This is a 12" speaker designed to be mounted in a speaker enclosure or combo amplifier.
Question:	Will this speaker fit a Fender Frontman 15g
Answer:	Don’t know as I put in in a Princeton 65. I would assume it will fit the same opening and enclosure as long as it is the same size speaker. This did have a heavier magnet, slightly larger than the one I replaced so had to take the top and sides apart to get it in
Question:	Would the 8 ohm work in the bugera v5, or should i get the 4 ohm
Answer:	if the amp requires 4 ohm then you should get a 4 ohm speaker. If it has an 8 ohm setting then yeah you could use it but it will give you half the volume.
Question:	Would a 8 ohm work to replace a 25 ohm speaker
Answer:	Donald, 25 ohm speakers are usually used in lo-fi, small-form applications (transistor radio, older-style headphones, etc). Can you elaborate on the application or type of speaker you are attempting to replace? This Jensen speaker is ideal for small guitar-amp utilizations.
Question:	Is there a polarity concern in replacing a speaker
Answer:	I used this to replace the speaker in my Bugera V 5 guitar amp and was pleased with the result. As far as I know polarity in speakers is simply a matter of hooking up the wires correctly. Positive and negative terminals.

Product description

This speaker was designed to capture the legendary sound of Celestion's 1970's 10s - a 10" speaker with a surprisingly meaty tone.

• Low In Output But With The Weighty Low End Balance Of A 12", The G10 Greenback Features A Complex, Creamy Mid Range And Smooth, Vintage Top End.
• 10 Inch Ceramic Magnet Speaker Available In 8 Or 16 Ohms.
• Country Of Origin: United Kingdom
• Package Weight: 4.8 Pounds

User questions & answers

Question:	Does anyone know the depth of this speaker
Answer:	5.1 inch or 130mm
Question:	I have a Line 6 iv and need a 10" Celestion 8 ohm 120 watt amp. Which speaker do I need
Answer:	The green back is a great choice for your amp. I have used them in my Dr Z and also in my fender champ practice amp.
Question:	where are these speakers made
Answer:	As of 2018, these are made again in the UK
Question:	this item fits on a laney cub 12r
Answer:	If your cab allows for a 12" speaker, then yes. I don't know of a 12" celestion, or speaker, that wouldn't fit in a cab that allows for a 12

Product features

Celestion Greenback Range

As the blues gave birth to hard rock, Celestion Greenbacks proved to be the right tone at the right time. Offering a higher power rating than Alnico speakers, the G12M and G12H with its ceramic magnet and responsive feel was a perfect complement to players who were driving their amps harder and harder. The speakers that gave us Clapton’s ‘Bluesbreaker’ tone on All Your Love and the sonic bombast of Hendrix’s Star Spangled Banner at Woodstock, remain the benchmark by which all others are measured.

Product description

This affordable, mid powered work horse speaker performs well with just about any playing style and has been used in many 4x12's and hybrid amplifiers.

• Perfect Replacement For Many Of The Small Combo Amplifiers On The Market Today Especially The Current Generation Of Modeling Amps.
• 12 Inch Electric Guitar Speaker Available In 8 Ohm Only.
• Country Of Origin: China
• Package Weight: 5.0 Pounds

User questions & answers

Question:	what is the spl/db of this speaker
Answer:	You have to go to website of a manufacturer
Question:	how many watts is speaker
Answer:	Honestly don't remember, but it's hefty enough along with my Eminence Man O War in my 2x12 cab to effortlessly handle the 150- and 120-watt amp heads that I have.
Question:	Is it designed for an 'open' back or 'closed' back cabinet
Answer:	The cabinet I put mine in is closed back. Open or closed back and which speakers work well in either setup is a matter of personal preference.
Question:	Does anyone know the exact hole in your cab for this speaker to fit properly
Answer:	The speaker will fit any cabinet or amp designed for a 12in speaker hole size maybe 10 . 5 " to 11 " however the drawback with this speaker is it has four pre drilled holes higher-end speakers like Jensen celestion eminence have 8 pre drilled I installed a pair of these 50 12 " in my old. Pro Reverb since I do amp stacking I blew out the original but was surprised of the crunch and the nice twang they have for bargain 12"

Product description

The ET90 is our latest addition to the ET65 lineage. Taking its core sound from the ET65, the ET90 gives you more all the way around. We went to larger motor and a beefier voice coil on this model. The result is more headroom, more power handling and a bigger feel. If you've been looking for classic British tone with an "open" feel and a lot of power, the ET90 is your new favorite.

• Diameter 12.2"
• Overall depth 5.3"
• Cut-out Diameter 11.1"
• Mounting slot dimensions 0.31"
• Number of mounting slots: 8
• Mounting slot PCD 11.7"
• 8 ohm, 90 watts

• If you've been looking for classic British tone with an "open" feel and a lot of power, the ET90 is your new favorite
• Diameter 12.2"
• Overall depth 5.3"
• 8 ohm, 90 watts
• See Product Description for more specs

User questions & answers

Question:	Where are the creamback speakers made
Answer:	The Celestion boxes speakers shipped in are printed, MADE IN UK.
Question:	Would this speaker pair well with a Celestion Vintage 30 in a 2x
Answer:	Not sure what you mean by "pair well". The sensitivity of the V30 is 100 db vs. the 97db for the Creamback. This means the V30 will be much louder in the same cab. As far as mixing tones that would be a subjective decision and you should search sources on the internet including the Celestion site for more insight.
Question:	Would this be a good speaker for my 1986 Marshall 4203 30 watt amplifier
Answer:	If it's a bright sounding amp you want to warm up a bit, I do believe you will like this speaker.
Question:	Hey i was wondering, if i put this amp in my blues jr 3 which i have cannabis rex in right now. would it be cleaner and louder
Answer:	The G12M-65 Creamback™ has a 97dB Sensitivity rating (quiet) and is designed to breakup. The Cannabis Rex™ has a 101.8dB Sensitivity rating (loud) and is designed for cleans. If you want more volume and cleans this is not the right speaker for you. This speaker is designed for warm vintage crunchy tones and is relatively quiet.

Product features

Celestion Creamback Range

The ever-popular Greenback is the undisputed reference point for sweet, harmonically rich tone and also for the way in which the output of an amplifier should be articulated as it tips from clean to crunch and through to fully-saturated overdrive. But what if you need Greenback sonics and response with more than 30-Watts power handling? Enter the Creambacks.

Neodymium

Every ounce a Classic Celestion, the Neo Creamback delivers all the magical tone you’d get from a conventional Creamback at around half the weight of a traditional speaker, thanks to its Neodymium magnet. Expect the same low end punch, warm, vocal midrange and sweet highs that made the Creamback famous: push it hard and enjoy the ‘race-car growl’ that sets pulses racing.

Product description

The Jensen Mod Series is said to be "Modern, with a touch of English." Major advancements in equipment technology and the introduction of new playing styles made it necessary to develop this speaker line, which is geared to the more modern player. The same diligence and dedication put into reissuing the original Jensen Vintage sound was used in developing the Jensen MOD line of speakers. These speakers sound clear and transparent with just a hint of their British rival's sound.

The MOD speakers are produced with the finest materials available, and are recommended for all types of music at all volume levels. They allow the player to hear the amplifier most efficiently while giving the musician flexibility in sound and power.

The MOD Series is the most versatile of all the Jensen speaker lines. MODs are available in many sizes (5", 6", 8", 10", 12", and 15" diameters) with a wide variety of wattages and impedances.

• This 6" Speaker Packs 15 Watts Of Power
• It Is A Good Upgrade For Small Practice Amps
• Modern Tone
• Ceramic Magnet, 15W Rated Power, 8 Ohms
• Made In Italy

User questions & answers

Question:	I have a vox brian may vbm 1. speaker is 6.5" & 8 ohm. i have not found anything in 6.5". will this work/fit
Answer:	This speaker is 165mm or 6.5" wide and should work in your amp!
Question:	Will this speaker fit into a Pignose encasing
Answer:	The speaker has a diameter of 165.8mm and a depth of 54mm. I would measure your current amp to see if this speaker will fit.
Question:	Does anyone know if this speaker will fit into a Vox Pathfinder
Answer:	Yes, this is labeled as a 6" speaker, but the overall diameter is 6.5"
Question:	Will this driver fit in Vox DA-5 amp
Answer:	This speaker should fit in that amp.

Product description

8" Bass Guitar Replacement Woofer - 8 Ohms - Model Number: Jolt 8, 175 Watts RMS - 350 Watts Peak, Bass Guitar Replacement Woofer, 8 Ohm, 75 Hz-5K Hz, 91 dB, 40 ounce magnet, 2" Voice Coil, Pressed Steel Chassis, Paper Cone/Cloth Edge, Brand New, One Year Warranty. Whether you are building your own bass guitar cabinet or replacing an old woofer, this 8" speaker woofer is what you need. The Jolt series are awesome woofers that produce deep lows and clear tones. Pressed Steel chassis. These are ideal for bass guitar rigs. Great for upgrading your existing cabinets or building you own. The Jolt series packs tons of punch! With your purchase, you will receive one 8" steel frame speaker as pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Model Number: Jolt 8
• 175 Watts RMS - 350 Watts Peak
• Bass Guitar Replacement Woofer
• 8 Ohm
• 75 Hz-5K Hz

User questions & answers

Question:	Would this fit a roland cube street ex and would it work for a small venue bass amp
Answer:	Not sure about the cabinet but will work for a small venue Bass amp
Question:	Will this work with lexus system
Answer:	It should work with any system as long as the impedance, speaker cutout, box or placement depth is comparable with the original. Sometimes modifications maybe necessary for fitting.
Question:	Will this work better in a ported or sealed enclosure
Answer:	Hello, thank you for your interest in the Jolt-8 from Seismic Audio. This will work in either, but is better in a ported enclosure in my opinion. Have a great day!
Question:	What is the pcd of mounting holes ? Will it fit in wooden enclosure of mounting holes pcd 197 mm
Answer:	Hi, The cutout diameter for the Jolt-8 is 7 1/8". Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

Product description

Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 Vintage packs an impressive punch with its 60 watt power handling.

• Has the fast response of a 10" but with the added vocal tones of a 12" it is an ideal choice to add depth to hollow sounding amps or for players who want added girth from their single coils.
• 10 inch ceramic magnet speaker available in 8 or 16 ohms.
• Has the fast response of a 10" but with the added vocal tones of a 12"
• 10 inch ceramic magnet speaker available in 8 or 16 ohms.
• It is an ideal choice to add depth to hollow sounding amps or for players who want added girth from their single coils.
• Powerful ceramic magnets
• Vintage packs an impressive punch with its 60 watt power handling

User questions & answers

Question:	Will this fit into a Vox AC
Answer:	If it has a 10 in speaker, yes, it should fit

Product description

Impedance: 8 ohms. Power Rating: 120W. Maximum Power:. frequency Response: 70Hz 5. 5kHz. Voice Coil Diameter: 1. 75 Inch , 44. 5mm. Depth: 5. 2 Inch , 132mm. Coil Construction: Copper voice coil. Magnet Composition: Ferrite magnet. Cone composition: Paper Cone. Nominal Basket Diameter:12 Inch , 304. 8mm. Sensitivity: 102. Magnet Weight: 38 oz. . Core Details: Non vented core. Coil Former: Polyimide former

• Very loud, responsive and articulate in every register
• Chunky and solid sound with a little top end sparkle
• Ideal for: College Rock, Classic Rock, Grunge, and Heavy Metal
• Package Weight: 9.75 pounds

User questions & answers

Question:

I have a musicman 112 RP 100 watt tube amp. will this speaker work

Answer:

you can run even lower wattage. You will be fine. I have that and a different eminence on top of a speaker cab that puts out 60. Remember that an amp only draws the power it can (I run my amps on a 240 circuit). EE is a b**ch to truly understand and you will get many response, but I can safely say you are perfectly fine running that speaker. its also 8ohms. If you run in a 4x4, just remember if you want to run them in parallel or in series, which dramatically changes the ohms required.

Product features

Eminence Red Coat Series Man O War

The Eminence Man O War guitar speaker is the work horse of tone. A proven and revered sound, very loud and responsive/articulate in every register. Chunky and solid sound with a little top end sparkle.

There are certain tones that stand out in musical history. In rock, in blues and all kinds of music. Ranging from tight and bright to growling grit, there’s a Redcoat model that’ll bring classic sounds alive for today’s players.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.