12 best acoustic guitar tuners

Product description

Snark SN5X Clip-On Tuner for Guitar, Bass & Violin (Current Model)

• Full Color Display
• Features frequency range tailored to guitar and bass
• Tuner can be used on front of back of headstock,Rotates 360°

User questions & answers

Question:	Can this work on Woodrow guitars
Answer:	Yes, that's why I chose this and better than other brands. Other brands have no pen and can not be written. But this beiens math cards are perfect! Comes all you need: total 270 cards ( Addition, Subtraction, Multiplication, Division Cards), 1 erasable pen and 4 rings, ideal gifts and teaching aids for kids.
Question:	What battery type do they take
Answer:	The cards go through the 11's. I just did his 12's on paper. Good quality cards, can be placed on a ring I used them all summer with my grandson and they worked great!
Question:	Is this tuner able to detect low tuning such as drop D. drop A, D standard, etc, on electric guitars
Answer:	Yes.
Question:	Does this measure how snarky you are being? I used it during a conference call and was very snarky, but it didn't seem to detect any snarkiness
Answer:	no - only in the one way not both.

Product features

Well Calibrated Tune

With a frequency range tailored to the guitar, bass, and violin, plus a newly redesigned processing chip, tuning is fast and accurate.

High Definition Display

New brighter display and 360 swivel head allow tuning at all angles. Gripped clip grabs on tight and stays in place.

Tap Tempo Metronome

Tap a in a tempo and use the arrow buttons to adjust.

Product description

Convenient and unobtrusive, the FCT-2 multi-function clip-on tuner helps ensure your instrument is always in tune, even on dark stages. Its handles noisy environments with ease thanks to its built-in vibration sensor. The color LCD display’s easy-to-read needle indicates how close to pitch each note is, and moves to the center of the display once the note is in tune. The FCT-2’s dual-hinge design allows you to mount the tuner on either side of your instrument's headstock.

• Compact, dual-hinged clip-on tuner
• Guitar, Bass, Ukulele, Violin and Chromatic tuning modes
• Color LCD screen with easy-to-read tuning needle
• Tuning Range B0 - B7; A440 calibration
• Includes CR2032 battery

User questions & answers

Question:	Can the tuning be changed or is it set only to
Answer:	It came with everything you need to play it as an electric violin.
Question:	how wide does clip open? I need it to open 1.5" + to attach to autoharp
Answer:	If you need a shoulder rest with an acoustic violin, you'll need a shoulder rest with this one as well.
Question:	For some reason the Chromatic Setting reads the correct notes on my guitar down my fretboard, but the guitar setting doesn't. Can someone tell me why
Answer:	Si!.. Se muestra con todos los accesorios. Una pieza 100% original y profesional. Recomiendo el Violín asi como el vendedor 100% 🌟🌟🌟🌟🌟 5 Estrellas
Question:	Does it work with bass guitar
Answer:	If you're unsure of how to place the bridge back on, take it to a music shop and they will assist you, music and arts centers will assist you in the store, I've done plenty of those at no cost when I used to work there. There is a certain direction and placing the bridge must sit to be able to sit properly, please seek a professional for instrument care.

Product features

It handles noisy environments with ease thanks to its built-in vibration sensor

The FCT-2’s dual-hinge design allows you to mount the tuner on either side of your instrument's headstock

The color LCD display’s easy-to-read needle indicates how close to pitch each note is, and moves to the center of the display once the note is in tune

• Fast & Accurate: Spend more time playing, and less time tuning. The UberTuner's advanced Micro Processor and highly sensitive Piezo Sensor will ensure your instrument is accurately tuned in a flash.
• Super Bright Display: The large color display allows you to easily see if you're flat, sharp, or dead-on from any angle. With 3 points of adjustment, you can position the screen in any way you like.
• Easy to Use: Turn it on, clip it on, and you're ready to tune. Since the tuner detects the pitches directly from your instruments' vibrations, ambient room noise will never get in the way.
• Reliable: With a strong and durable design, this tuner was built to last. From light use by the music hobbyist to heavy abuse by the touring road warrior, the UberTuner will get you in tune every time.
• 3-Year Manufacturer Guarantee: In the unlikely event the KLIQ UberTuner stops working, we'll replace it or give you 100% of your money back, no questions asked.

User questions & answers

Question:	Will this tune a banjo
Answer:	4 3/8 " w x 2 7/8" h x 1/2" d
Question:	Will this tuner stay in the tuning I calibrate it to? E.g. if I set it to 432hz will it remain there each time it's turned off and on
Answer:	Well, I just bought one and haven’t used it yet but it looks to me like you can tune anything with it. The device merely shows the frequency Of the notes it “hears”. You stilll have to “tune” the instrument to the proper frequency, which you can see on the device.
Question:	Learning cello 1st position. need a device to show if I'm spot on. Quick response? Attach to bridge? Handles harmonics accurately
Answer:	Yes, you can plug your electric guitar directly into this tuner without an amp and tune it. The input on the right side is used for this.
Question:	Can I easily calibrate this to 432 Hz
Answer:	Yes

Product description

Features:

Neewer universal size guitar string tuner, fits for all balladry guitars

Made with high quality zinc alloy metal

With heavy duty internal gear

6 Pieces (3 for Left + 3 for Right)

Set Includes 6 Ferrules and 12 Screws

Note: Accessories ONLY, Guitar is NOT included

Material: Zinc Alloy Metal

Weight: 4.3oz/121.9

Package Contents

6 * Tuner Machine Head(3 for Left + 3 for Right)

6 * Ferrules

6 * Threaded Bushing

6 * Screws

• Neewer universal size guitar string tuner, fits for all balladry guitars
• Made with high quality zinc alloy metal
• With heavy duty internal gear
• 6 Pieces (3 for Left + 3 for Right)
• Set Includes 6 Ferrules and 12 Screws

User questions & answers

Question:	Will they work on a Johnson axl electric
Answer:	Don’t know. I only do acoustic guitars, but they are standard tuning machines they work fine on those, of that’s any help.
Question:	I need 4R n 4 L for my mandolin. Will they work n if yes will sell it for me?what cost
Answer:	They work good
Question:	Which size they are? Ratio
Answer:	locking tunners are the ones you want.1:15
Question:	Does this product work
Answer:	YES, work fine. I put them on a home built folk guitar. They keep tune very well.

• Different Application and Modes: Lightweight MOREYES guitar tuner suitable for any guitars,bass,ukulele(C/D),violin and chromatic. Tuning modes: (C: Chromatic, G: Guitar, B: Bass, V: Violin, U: Ukulele).
• 360° Rotate and Soft Silicone Pad : Flexible to rorate clip adjust the angle you need and clear backlight LCD digital screen can easy to read.soft silicone pad protect your instrument without scratches.
• High Precision and Sensitivity: Moreyes guitar tuners can accurate and quick to tunning your precious instrument even in nosie or dark environment and easy to adjust with one hand.if tuner no operation that tuner will be auto power-off after 3minuite.
• Varities thicknesses: MOREYES lightweight and durable guitar plectrums made of Celluloid material which fit for any 6 strings guitar, 5 thicknesses including ( 0.46 0.71 0.85 0.96 1.2 mm),suitable for beginner and professioner musicians.
• Unique Design: Different thickness picks make different music tone and 7 colors meet you needs,same thickness picks in a good package,all thickness guitar picks in a container,each picks write thickness keeps you easy to find and store.

User questions & answers

Question:	Does it come with a battery
Answer:	One of the 3 little plastic tabs on the back where the ball joint of the clip fits into the tuner housing broke on me, but I was able to fix it with a small zip tie. Been working fine ever since.

Product description

Product description:



Features:



This item is a set of 6 pieces of semiclosed guitar tuning pegs machine heads, which are adopted with strong metal with great endurance and practicability.



These guitar tuning pegs are great replacement for the old, broken tuning pegs, fits for almost all acoustic guitars and electric guitars.



The pegs are used to fix strings and improve the sound of strings. They hold the string tight. These make string changes super fast and super simple.



 Durable and highly reliable for easy, smooth, and precise tuning.



The set comes with 6 pcs ferrules and 12 pcs screws, easy to install.



Professional design, exquisite manufacturing process and accurate grinding ensure practical use and elegant appearance. Ideal instrument parts for acoustic and electic guitars.



Specifications:



Material: Zinc alloy



Gear material: Copper



Finish: Chrome



Total weight: 211g / 7.4oz



Notes:



Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank you!

• Set of 6pcs quality semiclosed chrome machine heads(3L+3R), fit for 6mm tuner hole.
• Heavy duty internal gear tested, durable to use, compatible with steel string electric guitar or acoustic guitar.
• Gear ratio: 1:14; Zinc alloy material with chrome plating；Location: 3L 3R; Head size is 22mm width. For specific dimensions, please look at the size diagram.
• Package includes: 3L+3R guitar machine heads(semiclosed); 6×ferrules; 12×screws.
• 100% brand new and testing is fine. Easy to install, just slip the string though the hole, tighten the locking thumb wheel, and tune the string.

User questions & answers

Question:	Would 3lr or 6lr fit a fender squier bullet
Answer:	The acoustic model is voiced for the acoustic Traveler guitar and the electric for the electric Traveler guitar. I have not tried the Traveler brand electric, but I have tried a few of the Vox headphone amps. The Traveler acoustic amp delivers a much cleaner sound, which meets my needs. I recommend it if you are going to use it with an acoustic guitar. But the Vox amps (and I image the Traveler electric) are great for electric sounds.
Question:	Are the ferrules metal
Answer:	Technically the answer is "yes", but since this device *is* itself an amplifier, it would only make sense if the amp or other device you want to plug in requires a high-level input. In that case, this would function as a preamp.
Question:	Will these fit a fender squier bullet strat
Answer:	Plug it into the output of the pedal board. It will work just fine.
Question:	Is this for aqustick guitar
Answer:	Well... Yeah. For studio or ear buds. It will cut out most of the lows, but you can get a Killer Cliff Burton (look it up) or snappy clean and fuzzy fuzz. Seriously think these are the cheapest and the best headphone amps. I use it as a pre-amp straight into a PA... So far beyond its price range! Enjoy brother

Product description

Snark ST-8 Super Tight Clip On Tuner (Current Model)

• Display Rotates 360 Degrees (works for right or left-handed players)
• "Stay Put" Clip
• Tap Tempo Metronome
• Pitch Calibration (415-466Hz)

User questions & answers

Question:	The last two sn-8s fell apart w/little use. both axis, on the clip and right under the tuner itself. have you done anything to improve the quality
Answer:	I don’t really know. The stand is not as sturdy as what I needed and the shelf didn’t hold multiple items. I gave it away and ordered another heavy duty stand
Question:	Is this a chromatic tuner. I want to tune all strings down a half step starting with the sixth string to E flat. Will this tuner do that
Answer:	I assume you're asking about the included instrument holder. It's possible, but it seems like a viola might be a bit to heavy for it, so I haven't tried using it for anything larger than a soprano ukulele or 3/4 size violin, and it works fine for that. The stand I've been using for years for my viola is made by Ingles, and I recommend using that for heavier or more valuable instruments.
Question:	Is this for All instruments? Im a trumpet player, and id like a clip on tuner to clip to my bell or the stand so i can always moniter my tuning
Answer:	No. It will not hold a ukulele. I just received mine going to be able to do just that, but no, it will not.
Question:	Does this tuner offer A
Answer:	When pulled all the way up, it measures about 54 inches to the hinge on the back which connects to the platform. From there your height will be a bit lower as the base of the platform is lower. I would estimate about 52 inches as the maximum height measuring from the floor to the base of the platform.

Product features

All Instrument Tuner

Newly redesigned processing chip and pitch calibration make for accurate tuning of any instrument.

High Definition Display

New brighter display and 360 swivel head allow tuning at all angles.

Super Tight

Gripped clip grabs on tight and stays in place.

Product description

Guitar Tuning Key:

Material: Metal, Plastic

Color: Silver Tone

Fit for Bore Hole: 9.3mm/ 0.36"

Size: 10.7 x 4 x 4.2cm/ 4.2" x 1.6" x 1.7" (L*W*H)

Net Weight: 137g

Package Contents: 2 x Guitar Tuning Keys, 8 x Screws



Electric Guitar Strings:

Material: Plastic, Nickel Alloy Wound

Diameter: E-1st(0.73mm/0.29"), B-2nd(0.85mm/0.34"), G-3rd(1.05mm/0.41")

D-4th(0.79mm/0.31"), A-5th(0.92mm/0.36"), E-6th(1.13mm/0.44")

Color:As Picture's Shown

Weight:25g

Package Content: 6 x Guitar Strings

• This tuning peg is used widely for steel string and guitar tuning.
• Ideal for classical guitar or electric guitar, screws included here.
• Compatible with most acoustic guitars for excellent playability.
• Features long lasting and professional quality string, beige plastic buttons.
• A top choice of today's musician, ideal to replace your old and dirty tuning pegs.

User questions & answers

Question:	Hi, Can the plastic be removed from the post with the hole in it? They appear too large to fit in the holes in the headstock
Answer:	Yes although I had to drill new mounting holes on mine.

Product description

✔ [ BEST CHOICE ] Do you want your beloved instrument to give you a more reliable and excellent performance? Do you want your favorite instrument give varied and beautiful tones? If so, this capo and guitar tuner clip is your best choice.





✔ [ ORDER NOW, WITHOUT RISK ] -- If Sound harbor capo and Guitar tuning are any quality issues, please contact us - We will provide free replacement or refund !





Guitar Capo Details





✔ [ PROFESSIONAL CAPO ] Designed for acoustic and electric Guitars,also fit Ukulele, Banjo, Bass, Mandolin.





✔ [ STRONG SPRING ] Capo tight on strings and no more fret buzz. Steel spring with internal memory to provide strength and fatigue resistance. It Puts Just Enough Pressure on the Instrument.





✔ [ DELICATE SILICONE PAD ] Protects your precious guitar from any scratches or damage .





✔ [ PROFESSIONAL CAPO ] - Quickly and easily releases and repositions with one hand without disturbing tuning.The strong spring action clamps it firmly in place.





✔ PERFECT SOUND- tight on strings and no more fret buzz. Steel Spring with Internal Memory. It Puts Just Enough Pressure on the Instrument.



♫ Guitar Tuner Clip Peculiarity





♫ [ MULTI-USAGE ] Multi-function Digital Tuner can be used for the tuning of guitar,chromatic,bass,violin,viola and ukulele.





♫ [ HIGHLY PRECISE TUNER ] High Precise Detection and sensitive vibration Tuner clip,no background noise,good for Applicable to a variety of environments.





♫ [ 360 Degree Rotatable ] 360 degree rotational Tuner clip for easy viewing from any angle.

• ✔ [PROFESSIONAL GUITAR CAPO] - This guitar capo is suitable for guitars of different widths, such as electric guitar, acoustic guitar, bass, mandolin, ukulele, and banjo to change intervals quickly. The package includes 1 Guitar tuner and 1 rosewood guitar capo with 4 guitar picks
• ✔ [ALWAYS KEEP YOUR INSTRUMENT IN TUNE] - The ultra accurate, sensitive and stable tuner， perfectly designed for acoustic, chromatic and electric guitars, bass, ukulele, banjo, violin as well as wind instrument, can handle noisy surroundings because of its built-in vibration sensor. It is very easy to change modes between different string instruments and you would never worry about playing out of tune anymore with this tuner
• ✔ [FUNCTIONAL & BUILT TO LAST] - There are 4 turning keys setting to turn for your instruments, including chromatic, F key, B flat key and E flat key. Just simply press the button to select one of the tuning modes, including (C)chromatic, (G)guitar, (B)bass, (V)violin, or (U )ukulele. In addition, the clip-on tuner, great for beginners and professionals, is easy to operate and can save battery power well due to its automatic shut-off function
• ✔ [TIGHTLY CLAMP] - This guitar capo is tailored to the instrument's fret board radian to fit the musical instruments better, allowing experimentation of playing in different keys at ease, which is compatible with many instruments with u-style, v-style or c-style and it's able to tightly and evenly clamp the strings to make the guitar sound clear and loud, with no buzz. Feel free to use your creativity with Sound harbor Capos!
• ✔ [NO BUZZING NOISE] - Sound harbor guitar capos are subject to stringent inspection and quality and these guitar capos hold the strings down perfectly to make the perfect sound you want and do not create any buzzing noise, allowing you to play with it in any position on the neck you want, which has become one of the most important skills guitarists must master in expressing perfect sound effect. Start to customize your own music!

User questions & answers

Question:	Where is this made ? u.s.a. or china
Answer:	made in china
Question:	What barrery does it use
Answer:	HI this Guitar Tuner Use 2032 Button batteries .
Question:	How accurate is the tuner
Answer:	hi The order content is shown in the figure ,include: 1 Rosewood guitar capo, 1 Guitar tuner and free 4 guitar pick. IF NO GUITAR TUNER RECEIVED ,WE GUARANTEE A FULL REFUND
Question:	Does the tuner come with battery or do you have to buy them separate? If separate...what size batteries are needed
Answer:	tuner No additional batteries are required

Product description

YMC universal size guitar tuning pegs head machine tuners, fits for electric or acoustic guitars guitars.

100% Brand New, Never Used

Item 100% like the picture shown

Made with high quality Zinc Alloy metal.

With heavy duty internal gear.

6 Pieces (3 for Left + 3 for Right) .





Note: Accessories ONLY, Guitar is NOT included.

Package Includes:

6pcs * Tuner Machine Head(3 for Left + 3 for Right)

6pcs* Ferrules

6pcs* Threaded Bushing

6pcs * Screws

2pc*Guitar Strap Lock(Random color)

• YMC universal size guitar string tuning Pegs machine head tuners, fits for almost all acoustic guitars and electric guitars
• Made with high quality zinc alloy metal; With heavy duty internal gear.
• Chrome finish. 6 Pieces (3 for Left + 3 for Right)
• YMC Guitar Protector Premium Strap Locks: Work with most OEM strap buttons. Easily slip over existing strap buttons. No need to remove or replace existing strap buttons on your guitar.
• Package includes: 6pcs * guitar machine head (3 Right and 3 Left), 6pcs * ferrule, 6pcs* threaded, 6pcs* screws, 2pcs * quality YMC Guitar Strap Locks((Random color).

User questions & answers

Question:	Are the screw holes straight/perpendicular to the housing, as shown picture 1 & 2. Or, are they angled, as shown picture
Answer:	I bought these (6r) to replace my tuners on my Made in Indonesia Squier Bullet Stratocaster. For me, they were NOT a drop in replacement. The screw holes were close but not close enough to use without filling the old holes and drilling new ones. The tabs you turn for tuning were also a little larger than my originals. Otherwise I think they were good for the price but just not the drop in replacement I was hoping for.
Question:	Again I ask what is the turning ratio for these tuners? Please give actual ratio
Answer:	They are metal as far as I can recall.
Question:	Will these work for s Fender Squier
Answer:	I used them on a Crestline acoustic guitar. Not sure but don't see why they wouldn't work for you.
Question:	Do these fit epiphone style guitars
Answer:	i used them on a rogue and a burnswood both acoustic. you might have to get a mm ruler to determine the if the length of the actual string peg extends enough depending on the width depth of you actual headstock. i'm about to buy another set to use on an old 60's kay acoustic i'm repairing. the mm ruler should only cost like 3 dollars and can be found pretty much anywhere. or use the inch to mm converter on google. and check back the dimensions on amazon to insure proper length. i'm betting they would i have not found an acoustic that they did not work on as of yet.

• 【Tuning Instrument】Simplicity and accuracy, clip-on tuner for chromatic, guitar, bass, ukulele, violin
• 【6 String Tuner】6 C tone standard pitch ( bass mi, bass la, alto re, alto sol, alto Si and high pitched mi ), corresponding to the 6 strings of guitar or other musical instruments
• 【Automatic shut-off function】Clear LCD digital display with a good backlight making it easy to read, the tuner will be power off automatically after 3 minutes if no operation
• 【360 Degree Rotatable】With 360 degree rotational clip, you can adjust the angle you need
• 【Easy To Use】Lightweight and compact size, suitable for music teachers, professional and beginning players

User questions & answers

Question:	Will this work for autoharp
Answer:	For the top daybed you can go as thick as you want, but for the trundle, not so much. There is a clearance of more than 9 inches on the trundle when it is directly under the daybed, but the lip panel on the front of the daybed only gives 7.25 inches of clearance for the mattress. I was able to cram my 8 inch mattress under the thing, but then I really struggled trying to pull it out again.
Question:	Does it come with 1 or 2 batteries
Answer:	I ordered the product which wasn't an "exact" match however I was thoroughly pleased with the results. Colorful Futon Cover Slipcover (Navy Blue, Twin (39x75 in.))
Question:	Will this work for electric guitars
Answer:	Yes, the bottom bed pulls all the way out and is on wheels so you can move it to any area. Just remember that the bottom trundle does not lift up.
Question:	How do you change modes between Guitar and Ukulele
Answer:	I’m not sure I know why you would, unless your mattresses are higher than 8”. We used the same size mattress for both and it worked out fine, although my son likes the memory foam gel mattresses and they fit the frame as is. I wouldn’t know about the high riser frame because he didn’t need one.

Product features

How to Use a Clip-on Tuner

Place the tuner on the headstock so it doesn’t come in contact with the strings or pegs.

Turn on the tuner and strum the E string, then move the peg to tune it.

Once the display changes to green color, you’ve got the note and can move to the next string.

105° TILT & 360° TURN

EASY TO REAF

3 PICKS AS GIFT

Product description

3L3R 6 Pieces Semi-closed Guitar String Tuning Pegs Tuner Machine Heads Knobs Tuning Keys for Acoustic or Electric Guitar, Gold.



Features:

Set of 6 machine heads (3R+3L).

  Fine sealed machine heads.

Long durability and corrosion resistance.

Material: Metal; Color: Golden



Package Includes:

6pcs Tuner Machine Head( 3 for Left + 3 for Right)

  6pcs Ferrules

6pcs Threaded Bushing

  6pcs Screws

• Set of 6 gold tuners machine heads for steel string (electric or acoustic) guitars (3L3R)
• Golden finish. 6 Pieces ( 3 for Left + 3 for Right); Semi-closed gold tuning pegs machine head.
• Work with most OEM strap buttons. Easily slip over strap buttons. No need to remove or replace buttons on your guitar.
• Made with high quality metal; With heavy duty internal gear, it’s effective to prevent screw slippage.
• Excellent workmanship, an ideal replacement for your guitar tuning keys.

User questions & answers

Question:	It says locking tuners in the description, but they do not look like they lock the strings, do they
Answer:	Good for the money. No locking of the strings. Basic tuner.
Question:	Will it fit 10mm diameter holes
Answer:	Yes. Measures approximately 9.95mm.