10 best volume pedals

Product description

The potentiometer has a 250k ohm resistance suitable for the audio path of passive instruments. Behind the jack area under the footplate is a micro taper switch which provides the user two distinct volume swell rates. Overall Volume Pedal Junior dimensions: 3.5" W x 10" L x2 3/8" H . The main pivot shaft is of centerless ground 1/2' diameter stainless steel, precision seated though nylon bushings at both ends. Tough long lasting Kevlar cable transmits pedal travel to the controls and is attached by stainless steel springs. Part number 6180.

From the Manufacturer

New compact design allows more floor space. The potentiometer has a 250k ohm resistance suitable for the audio path of passive instruments. Behind the jack area under the footplate is a micro taper switch which provides the user two distinct volume swell rates. A tuner output is provided and allows silent tuning when the pedal is in the heel down position.

Product Number: 6180

The design and development of the Ernie Ball pedals has been a team effort of guitar players and craftspersons within our company. Pedal bodies are an aluminum extrusion rather than a casting resulting in greater strength, uniformity, and smoother surfaces. Clear anodized grain finish insures lasting beauty. Overall dimensions: 4" W x 11" L x 2.5" H. The main pivot shaft is of centerless ground 1/2' diameter stainless steel, precision seated though nylon bushings at both ends. The large center shaft diameter, in addition the strength factor, creates a broader stress bearing surface. Our bodies and shafts are designed to give the player an indefinite service life! Deck mat of non-slip material is impervious to oil, alcohol, and most things you might spill on it. Quick disconnect wiring harness allows changing the pot without soldering. Tough long lasting Kevlar cable transmits pedal travel to the controls and is attached by stainless steel springs. This drive design results in smooth and quiet operation qualities lacking in gear driven models. Cycle tests are made on every pedal to insure perfect operation prior to packaging.

• Jr size to better fit on pedal boards
• Mono volume control
• Taper switch for two distinctive swell rates
• For passive signal in

User questions & answers

Question:	I thought the "Jr" model meant it was small(er). Wow, this thing is big, what am I missing? Do they make anything smaller
Answer:	Hello there, not sure what is happening with this pedal. I use this model and do not have that issue. Have you tried adjusting the level to a wider signal?
Question:	Does the tuner output work full time or only when the pedal is heel down
Answer:	This pedal does not have a on/off switch so the signal is never interrupted, it does not have to be true bypass. It’s a great pedal.
Question:	Does this pedal need a battery and/or power supply
Answer:	Yes , It certainly does in my experience with it! I have alll of my overdrive pedals placed before this, and the guitar cranked up, and you have the full overdrive that you desire at any volume, with all the tone intact! Active volume pedal is the way to go. I have my delay pedals placed after this volume pedal, and everything sounds great! Love it!
Question:	What is the difference between the E.BALL 6180 JR and the 6181 JR? Is one more versatile
Answer:	Since the MVP is an active pedal with a buffer, it needs to be powered. According to their webpage, the current draw is less than 3 mA.

Product description

Control your volume and FX parameters without crowding your pedalboard. Saving space doesn't mean skimping on durability or functionality-the DVP4 Mini Volume (X) Pedal does everything that the larger DVP3 does at half the size, and it's just as solidly built with a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable. The AUX output combines tuner and expression functionality into one jack that can be toggled with a switch inside the pedal. When using the DVP4 as an expression pedal, you can use an internal pot to set the minimum level of the parameter you're controlling with the rocker. If you want to reverse the function of the heel-down and toe-down positions, the DVP4 has another internal switch that allows you to do so. Don't sacrifice control over your volume level and FX pedals just because you're using a travel-sized board. Get yourself a Volume (X) Mini Pedal.

• Controls volume levels and FX parameters
• Half the size of the DVP3
• Low Friction Band-Drive for smooth, durable
• Lightweight and pedalboard-friendly
• AUX output for switchable tuner/expression functionality

User questions & answers

Question:	How do you use the aux out to tuner? Do you join it to the chain or separate cord
Answer:	No, it does not.
Question:	Would this pedal work with a bass
Answer:	High Carbon steel with tin plating.
Question:	Does this pedal require a power source
Answer:	they can be either aluminum or silver depending. If the the label of your string envelope reads VI103, then it's aluminum, if the label reads VI103A, then it's silver . On line catalog here:http://www.thomastik-infeld.com/sites/default/files/catalogue/ti_katalog_a2_05_2015_violin_0.pdfHope this helps.
Question:	Is this a low or a high impedence pedal
Answer:	The above set comes with a slider D.If you want a set with an Aluminum D you will need to order the strings separately.We are in the process of creating a set with Aluminum D...

Product description

For 14 years, the famous BOSS FV-300 served as an industry-standard volume pedal. The tradition continued with the FV-50 series, but today the bar has been raised with BOSS’s FV-500H (mono, high-impedance, inst. level) and FV-500L (stereo, low-impedance) pedals. These tank-tough diecast pedals are designed to meet the needs of the most demanding customers. The pedals offer a new stylish design, a road-tough build, and a comfortable, smooth action. Both models also provide an Expression output for use with expression-compatible amps, effects, and even synthesizers.

• FV-500H: mono, high-impedance, INST. Level
• Heavy-duty aluminum die casting body
• Ultra-smooth pedal movement for the utmost in comfort and control
• Pedal rubber is for comfortable play and non-slip action
• Expression pedal function
• Convenient tuner-output jack
• Adjustable pedal feel (torque)

User questions & answers

Question:	Does this pedal have a 500k pot
Answer:	No, the Volume section uses a 250k pot. There's a second (10k) pot for the expression function.
Question:	Is this an active or passive volume pedal
Answer:	Passive. And you won’t find a better pedal made by anyone!!
Question:	Will this work with an active electronics preamp guitar
Answer:	The FV-500L is going to work better.
Question:	What's the difference between this one and the boos fv-500H
Answer:	The FV-500H (H is for high impedance) is a mono volume pedal ( 1 In, 1 Out) for guitar, bass or "instrument level" connections. FV-500L (L is for low-impedance) is a stereo volume pedal (2 Ins, 2 Outs) suited more to connection to keyboards, mixers and line level connections. Both models also provide an Expression output for use with expression-compatible amps, effects pedals, and keyboards/synthesizers. Both include a minimum volume control knob. Both have adjustable pedal tension. Both have a tuner output.

Product features

FV-500H Volume Pedal

For 14 years, the famous BOSS FV-300 served as an industry-standard volume pedal. The tradition continued with the FV-50 series, but today the bar has been raised with BOSS’s FV-500H pedal. This tank-tough diecast pedal is designed to meet the needs of the most demanding customers. The pedal offers a new stylish design, a road-tough build, and a comfortable, smooth action. It also provides an Expression output for use with expression-compatible amps, effects, and even synthesizers.

As with the other models in the FV series, two different pedal versions allow you to choose the best type for your specific application:

FV-500H—mono, high-impedance, inst. level

FV-500L—stereo, low-impedance

• Passive Volume Control/Expression Control 2 functions in 1 Pedal
• Automatically Detect the Functionality (Volume or EXP Control)
• Working with Guiar, Bass, Keyboard, Synthesizer, Workstation, Controller, etc.
• Working without Battery or Pedal Power Supply
• Lightweight & Comact Design for easily Taking it Anywhere

User questions & answers

Question:	is it high impedance or low
Answer:	Didn't notice any. It took about 24 hrs for "new smell" to go away. I'm very allergic to the off gas odors & didn't have any problem. Hope that helps.
Question:	Do you think this would work as a volume control between a single drum trigger & drum module w/ 1/4 inch cable? No need to respond if you don't know
Answer:	polished
Question:	Is this pedal spring loaded
Answer:	Feels like faux leather.
Question:	this is a wah pedal right
Answer:	Legs might be rubber wood - not sure as they are painted/ lacquered black and shiny. they look nice.

Product description

This passive volume pedal allows for dynamic control. This passive volume pedal allows for dynamic control. Ideal for Pedal Steel Players and other volume-control applications. Features: Heavy die cast housing built for durability, 1 million cycle audio taper potentiometer. Does not require batteries or external power source. 10" x 4" x 2-1/2" 3.5 lbs.om is an authorized dealer of Dunlop products.

• Great for pedal steel swells and instant dynamics
• Quiet operation and heavy-duty construction
• Ultra-sensitive 1 million cycle taper potentiometer
• Power: passive in-line circuit requires no additional power
• Dynamic control
• Die cast housing
• 1 million cycle potentiometer

User questions & answers

Question:	Is this spring loaded in the sense that when you press it, the pedal will return to it's original position
Answer:	The tuner output works full time.

Product description

The low-impedance FV-50L is a stereo volume pedal that can be used for a wide variety of purposes including keyboards.

• Low-impedance FV-50L enables direct control of stereo keyboards and stereo effects units
• Minimum volume knob lets users set minimum volume as desired

User questions & answers

Question:	Does this work with a Zoom G3n
Answer:	I believe thats the smallest one in the line.
Question:	fade one input between two separate outputs
Answer:	The tuner output works full time.
Question:	what are the actual dimensions on this pedal? The ad lists it as 10 x 10 x
Answer:	No; since it's a passive volume pedal, it requires no power supply.
Question:	Would you recomment high impedance or low impedance if using in front of analog pedals and tube amp
Answer:	Hi there - The 6180 is for PASSIVE guitars and basses. The 6181 is for ACTIVE instruments. The potentiometer's value inside the pedals differs depending on what type of instrument you have. If you are using anything with active electronics (powered by a battery) then you need to use the 6181. If you have a normal guitar with standard magnetic pickups, then you need the 6180. -Andy

Product features

BOSS FV-50L Pedal

As with the other models in the FV series, two different pedal versions allow you to choose the best type for your specific application:

FV-50H—The high-impedance FV-50H is designed to be connected before guitar effect units in the signal chain.

FV-50L—The low-impedance FV-50L is a stereo volume pedal that can be used for a wide variety of purposes including keyboards.

Product description

Dunlop DVP4 Volume X MINI Pedal for Electric Guitars with Pedal Patch Cables:Control your volume and FX parameters without crowding your pedalboard. Saving space doesn't mean skimping on durability or functionality-the DVP4 Mini Volume (X) Pedal does everything that the larger DVP3 does at half the size, and it's just as durable and solidly built with a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable. dunlop expression pedal guitar volume pedal Dunlop dunlop mini pedal dunlop expression pedal guitar pedal guitar pedals guitar pedalboard pedal feet instrument cables instrument cables 10 ft cables instrument asin B01C2T8HDI and upc 710137094635 is for Dunlop guitar pedal.The AUX output combines tuner and expression functionality into one jack that can be toggled with a switch inside the pedal. When using the DVP4 as an expression pedal, you can use an internal pot to set the minimum level of the parameter you're controlling with the rocker. If you want to reverse the function of the heel-down and toe-down positions, the DVP4 has another internal switch that allows you to do so. Don't sacrifice control over your volume level and FX pedals just because you're using a travel-sized board. Get yourself a Volume (X) Mini Pedal.The Dunlop DVP4 Volume (X) Mini Pedal essentially gives you all of the functionality of Dunlop's DVP3 pedal at half the size.

• Dunlop mini pedal is Ultra-compact volume and expression pedal for electric guitar.Aux output combines tuner and expression connectivity.
• Internal pot allows you to set a minimum parameter value for expression pedal.
• Controls volume levels and FX parameters.For guitar, bass or other instruments.
• Low Friction Band-Drive.Adjustable pedal resistance.Aluminium housing.Internal trim potentiometer for setting the minimum volume.
• INCLUDES - Jim Dunlop DVP4 Volume (X) Mini Pedal for Electric Guitars. 2-Pack of Patch Cables.

User questions & answers

Question:	I am curious to know what the bottom of the pedal looks like and how grippy it is? It will not be on my pedal board. Thanks
Answer:	Separate cord. The tuner can affect the tone of your other pedals, even when it is off, so it is good to take it out of the chain.
Question:	The title says dunlop dvp4 volume x mini pedal but the dimensions given are 11.1 x 9 x 6.2 inches -- much larger. is this indeed the mini
Answer:	If you are using a cable (not a wireless) it will work. It could work with wireless also depending on where you locate your wireless receiver.
Question:	Can this pedal be daisy-chained to another effects pedal
Answer:	No, this pedal is a passive device.
Question:	Does this pedal actually come with the cables advertised
Answer:	According to the manual it's a 250k pot, therefore it's high impedance.

Product description

The World's first volume and overdrive expression pedal. The Ernie Ball Most Valuable Pedal provides a super smooth foot sweep, ideal for precise volume control with no high frequency loss at any volume. Works with both active and passive electronics, the MVP also includes a powerful gain boost allowing players to increase the audio signal up to +20 decibels. The MVP features a compact, rugged design consisting of a billet aluminum housing that is virtually indestructible. Requires DC 9V/100mA minimum power supply or 9V Battery. Part number 6182.

• Minimum volume control
• Gain boost
• Works with any signal anywhere in the signal chain
• Item Weight: 2.66 pounds

User questions & answers

Question:	is there a reason it cuts off my swells at a certain spot on the pedal? very unimpressed with this. if this is happening I might as well not use it
Answer:	This device is a line level volume control. It's likely no use to you if the amp doesn't have an fx send and return.
Question:	Is this true bypass
Answer:	It’s a loop attenuator. Amp got a loop?
Question:	A lot of people are saying it is buffered does that mean it will preserve my guitar tone
Answer:	It wore out a 250K pot in less than a year. I'd recommend a more robust unit if it is to be frequently used on the job. I'm hard on a volume pedal as I use it to fade in and out my drum unit.
Question:	Do you have to power this pedal or can it be used without
Answer:	This pedal comes with nothing extra....it worked fine for a few weeks at home when trying it out but, I used this pedal once at a gig for my guitar and it never worked again. So I don't recommend buying it...spend more to get more.

Product features

The World's first volume and overdrive expression pedal

The Ernie Ball Most Valuable Pedal provides a super smooth foot sweep, ideal for precise volume control with no high frequency loss at any volume. Works with both active and passive electronics, the MVP also includes a powerful gain boost allowing players to increase the audio signal up to +20 decibels. The MVP features a compact, rugged design consisting of a billet aluminum housing that is virtually indestructible. Requires DC 9V/100mA minimum power supply or 9V Battery.

Product description

Dunlop DVP4 Volume (X) Mini Pedal

Smooth as a whistle, the DVP4 Volume (X) Mini is a compact device that can be used as a tuner or expression pedal for electric guitars. The AUX output combines expression and tuner connectivity. As an expression pedal, you can set the minimum parameter value with the internal pot. Plus, the DVP4 runs on phantom power so no need to buy batteries or power supply.



TECHNICAL SPECS:

Internal TRIMPOT: 50 kOhm

Connectors: 1/4" Input, 1/4" Output, 1/4" AUX for Tuner/Expression Pedal

Power Options: Passive Unit, does not require power source

Dimensions (DxWxH): 6 x 2.97 x 2.5"

Weight: 1.2 lb



Also Comes With:



Blucoil 10-FT Straight Instrument Cables (2-Pack)

The Blucoil 10-foot instrument cable interconnects your electronic musical instruments (e.g., guitars, bass, keyboards) to a preamp or amplifier's unbalanced input. It features 1/4" male to 1/4" male straight mono plugs. The metal Neutrik connectors ensure reliable durability and improved contact integrity. The cords are protected with conductive PVC shielding, which cancels out electronic and radio frequency interference. The straight instrument cord removes the need for line-level adapters while Oxygen-Free Copper wires enhance the signal clarity.



Blucoil Right-Angled Pedal Patch Cables (2-Pack)

These cables interconnect your effects pedals while ensuring efficient and transparent signal transfer. The oxygen-free copper (OFC) cables make sure that no EMI and RFI noises are muddling your signals.



Get the DVP4 Bundle today and receive 4-Pack of Blucoil Thin Celluloid Guitar Picks!

• CONTROLS EFFECTS PEDALS WITH PRECISION - The DVP4 Volume (X) is just as smooth as a whistle. It enables you to adjust the rocker tension to match your personal preference.
• OFFERS A 2-IN-1 DEVICE - The mini pedal has an AUX output that can be used for expression. Plus, its internal pot (50 kOhm TRIMPOT) lets you set the minimum control value for the expression pedal.
• DOESN'T NEED POWER SUPPLY - Say goodbye to long adapter cables and short-lived batteries! The DVP4 Volume (X) runs on phantom power.
• COMES WITH NOISE-FREE CABLES - Included in this bundle are Blucoil Straight Instrument Cable and Pedal Patch Cables. All of these exclusive items effectively reject RFI and EMI noises.
• INCLUDES - Dunlop DVP4 Volume (X) Mini Pedal for Electric Guitars. 2-Pack of Blucoil Premium 10-FT Instrument Cable with 1/4" Straight Connectors and PVC Shield for Guitars and Amps. 2-Pack of Blucoil Right-Angled Patch Cables for Effects Pedals. 4-Pack of Blucoil Thin Celluloid Guitar Picks (Assorted Colors).

User questions & answers

Question:	Does the politune 2 mini tuner work in this aux output? or is there any incompatibility ? thanks
Answer:	I have two and they have worked perfectly for over a year now. Your pedal is simply defective. return it for another. It shouldn't be used as an on off switch for $20. unless that really works for you.
Question:	Can you easily switch between volume and expression mode
Answer:	It stays where you set it. But mine was bad about buzzing. Could be my house electrical wiring. Could be ground interference.

Product description

The Goodrich 120 Volume Pedal, which has long been a favorite of the professionals because of its simplicity and dependability. The 120 has two outputs for driving two amps or two channels of one amp. Use either output for driving one amp. The pedal utilizes a long-life potentiometer, giving you over 1,000 hours of guaranteed service. Made of heavy aluminum, this pedal will withstand years of use and abuse. Its rugged construction insures the pedal will stay in place, having a substantial feel under your foot. Its treadle movement is quiet and smooth, and will stay true to where the level is should you take your foot off the pedal. Order your Goodrich 120 Volume Pedal from Sam Ash Direct today with the security of our 45/60 day return/price protection policy and take advantage of our fast free shipping.

• Heavy-Duty Aluminum Constuction
• Long-Life Potentiometer
• 2 Outputs for driving 2 amps

User questions & answers

Question:	They say the Product Dimensions are 8 x 12 x 12 inches. these are ridiculous numbers. What are the dimensions
Answer:	I can't tell you, because I haven't try it. Bit I think it can work for it too.