14 best guitar eq pedals

Product description

The tone job is a complete tone enhancement tool designed around a stereo preamp to cover as much frequency range as possible. What does this mean for you, The user? It means it can handle a wide variety of frequencies from electrical guitars, bass guitar, synthesizer machines and just about anything else you can plug in. The treble, bass and middle controls will cut or boost up to 20dB. In addition to that, the level control will boost the signal (post EQ) up to 5 times the input depending on where the dial is set. A simple, perfect pedal to place at the end of your effect chain to boost output and fine tune your tone or at the front of the chain to alter the character of your guitar and breath new life into tired old dirt.

• A compact Boost & EQ is based on the tone-shaping options available in old audiophile-grade stereo preamps
• A great addition to your pedalboard no matter what you play
• You’ll hear full frequency response from your Tone Job everywhere you plug it in
• Place the Tone Job at the beginning of your chain to alter the overall character of your guitar
• Use it at the end to boost output at the end of a long cable run and fine-tune your tone
• Made with care by human hands in Akron, Ohio

User questions & answers

Question:	When used as a solo boost, is the switch silent when switching
Answer:	I returned it because I couldn't seem to get pleasing tones for my taste. But the quality was excellent. I don't recall specifically, but I'd be surprised if the switch was anything less than silent.
Question:	Should you run this through the effects loop or at the front of your pedal board
Answer:	You can go either route but it depends on whether you're running dirt pedals into your amp or using your amps drive channel. I would say the Tone Job works best right after the dirt to shape the tone and give you a nice mod boost so it can cut through the mix. If using the amps drive channel, put it in the effects loop (or if your amp has subpar EQing ability you can keep there to supplement or replace the amps EQ unit). If running a full pedalboard I would place after the dirt pedals but before any modulation or time-based effects.

Product features

EarthQuaker Devices Tone Job V2

This compact Boost & EQ is based on the tone-shaping options available in old audiophile-grade stereo preamps, so it's a great addition to your pedalboard no matter what you play. Meaning you’ll hear full frequency response from your Tone Job everywhere you plug it in–guitar, bass, drum machine, synthesizers, steel drums, harpsichord, kazoo, car stereo*, or wherever!

*We haven’t actually tried it on our car stereos, but it probably sounds pretty good if you can figure out how to patch it in!

Level

Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 O’Clock.

Treble

Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

Bass

Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

Mid

Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

• 🎸 7 Band EQ - With it’s “mini” pedal footprint and powerful +/- 15 db range, the EQ7 is a “must have” for any pedalboard, and a great addition to a musician’s gig kit.
• 🎸 ACCURATE TONE SHAPING - Easy to see and use sliders for 65, 125, 250, 500, 1k, 2.2k & 5K provide clean adjustment in the most needed ranges for accurate tone shaping in almost any circumstance.
• 🎸 FLEXIBILITY AND EASE OF USE - A bright LED & quiet true bypass electronic switching and an overall gain control provide flexibility and ease of use on stage or in a studio.
• 🎸 VERSATILE RIG DEVICE - Whether implemented to correct problems in a live setting or used for just a little “extra kick” for soloing, the EQ7 is sure to be one of the most versatile devices you will have in your rig!
• 🎸 True-Bypass with powerful analog circuitry, housed in a compact, die-cast box. 1/4 inch input and output jacks and an AC adapter input on the top of the unit. Uses a standard 9-volt negative tip power supply, or add a daisy chain to run multiple pedals from the one power supply source. (Adapter not included).

Product features

EQ 7-Band EQ Mini Equalizer Pedal

There's never been a much more perfect time to shape your tone and sculpt the perfect frequency of your pedalboard with whatever amp you throw at it. So get your EX 7-Band EQ today and experience full tonal control wherever you go!

Tone Sculpt with Ease

The 7-bands let you cut or boost frequencies, depending on your amp configuratons to tonal preferences.

2-in-1 Tool

Set everything at the middle and crank up the level for instant boost.

Save a Bundle with an EX Pedalboard Bundle!

We’ve bundled up some our popular pedals and accessory products together with everything you need to ROCK!

Each package is designed and built with the appropriate pedals for either a Blues, Rock or Metal electric guitar player. You just pick out the package that matches the genre of music!

Great as a gift or stocking stuffer to anyone who has an electric guitar. Suitable for the beginner guitarist or the advanced axe slinger. Durable pedals with great sounds!!

Product description

Caline CP-81 10 Band EQ Guitar Effect Pedal with Volume/ Gain

The new 10 Band EQ is based on our CP-24 10 Band EQ, now with an added volume channel. You can really fine tune your tone with this EQ pedal due to the massive range of channels - 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1k Hz, 2k Hz, 4k Hz, 8k Hz and 16k Hz. With volume and gain control the CP-81 is durable and easy to use. It's true bypass so it won't impact your tone when off (although it should be on most of the time). Not only does it works well with guitar but also other instruments.



Specs:

True bypass

Power Requirement: 9V DC center negative

Current consumption: 300mA

Product Dimensions: 12x9.4x3.8cm

Weight: 0.35kg



Packing Includes：

1 * Effect Pedal

• Caline new 10 bands EQ pedal with Volume and Gain Control
• 2.Massive range of channels - 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1k Hz, 2k Hz, 4k Hz, 8k Hz and 16k Hz
• With volume and gain control the CP-81 is durable and easy to use.
• It's true bypass so it won't impact your tone when off
• Aluminum alloy shell, durable and stable

User questions & answers

Question:	Does this come with a power adapter
Answer:	No. Mine came with a small adapter cable to attach a 9V battery and plug that cable into the 9V connector of the unit. However, that's just for "external" use and nothing you would like to use as a solution to power the pedal. I am using it with my MXR ISO-Brick and it works like a charm.
Question:	Does it have the "noise reduction" circuitry like the mxr
Answer:	I'm assuming it uses the exact same circuitry since it is an obvious clone. It sounds really nice, especially with the 18 volts of headroom.
Question:	Is this analog or digital
Answer:	If you can't tell whether this is analog or digital by looking at the picture, there is a bigger problem at play here!
Question:	Why does it have one in and two outs
Answer:	It had to have one in and one out. The reason they have two outs, is because MXR included and extra mono out incase you want to record or connect another amp. Simply put: Keeping up with the Joneses.

Product description

Danelectro Mini Effects Fish & Chips 7-Band EQ Effect Pedal

• Possibly the smallest EQ available.
• Graphic EQ for stage or studio and noise free.
• Level control for boost or cut.
• Smooth Adjustable Sliders
• 7 Band EQ mini effect pedal
• 7-band graphic EQ for stage or studio use. Noise free.
• Level control for boost or cut.

User questions & answers

Question:	Would this fix a slight hiss if put between my pedal board and the sound board
Answer:	Yes, it could, but you might have to compensate by adding a little treble to the instrument to compensate for dunking down treble with the pedal.
Question:	What is the rated input impedance
Answer:	I don't know the exact impedance, but it's hi Z, quarter inch input and output.
Question:	Can I use this EQ to adjust the tones/frequencies on my Sennheiser headphones when watching movies? If so, any special adaptors needed
Answer:	Nah, this eq pedal isn't a stereo unit you can put between the receiver and the amp or the amp output to the headphones. Doesn't work like that. Really, if your Sennheiser headphones aren't good enough, try a stereo headphones enhancer. Try to think about what's wrong that I can't hear what I"m suppose to. Maybe need a better player.
Question:	Will this work with an electric bass guitar
Answer:	It works fine for bass. I use mine for a ukulele.

Product description

The MXR Ten Band EQ has been upgraded with noise-reduction circuitry, true bypass switching, a lightweight aluminum housing, brighter LEDs for increased visibility, and a second output so you can run two separate signal chains. With ten carefully chosen frequencies and both input and output level controls, the Ten Band EQ will let you tune your bass or guitar rig to any room in seconds-create earthshaking low-end; restore punch, level, and treble response to a crowded pedalboard; warm up an amplified acoustic; and much, much more. For ultimate tone-sculpting ability in a bullet-proof enclosure, put the Ten Band EQ on your pedalboard.

• Cut or boost 10 different frequencies up to ±12dB
• LEDs provide high visibility, even in direct sunlight
• 18-volt operation for increased headroom
• Two outputs for running two separate signal chains
• True bypass switching

User questions & answers

Question:	Has anyone experienced horrible radio interference with this pedal? I only use the best cables, and this pedal is the only problem child
Answer:	Not with this pedal but I have experienced that with others in the past. I rectified it by going wireless, since then I've never picked up any radio stations again.
Question:	What is input voltage of power supply? Our country only use 220volts ac
Answer:	As long as your power supply provides 9v, tip negative, 100mA current minimum power, you'll be fine. Just get the proper AC adapter or pedalboard power supply for your country. Brian Meader Sales Manager The Guitar Sanctuary
Question:	is their any difference from the m108 black
Answer:	Same no real difference
Question:	Does it draw more than 100ma? would like to use it w/a truetone 1 spot power supply...18v/100ma output
Answer:	don't know. it comes with an 18V 500ma power supply. and it works well.

• JOYO 6 Band EQ pedal, Each band provides a range of ±18dB to help you find your favorite tone. Includes the frequency bands: 100Hz, 200Hz, 400Hz, 800Hz, 1.6kHz and 3.2kHz.
• Excellent tone electric guitar effect pedal with true bypass provide transparent tone,minimize the tone loss to keep the best tone quality.
• Whole aluminium-alloy housing classic stoving varnish finish, stable and strong, with small LED flash indicator shows the working state.
• In addition to the existing JF/Ironman/R series of effect pedals, we will improve and upgrade our products, based on the extensive and constructive feedback with supportive.
• JOYO Technology Co.,LTD which established at 2006, it's over decade of brand reputation, with own electroacoustic core technology and a much more strong technical team, thousands innovative patents, guide design by music masters, and the most popular budget pedals and amplifiers, winning the love of global guitarists.

Product features

JOYO 6-Band EQ Pedal

JF-11 6 Band EQ guitar pedal EQ pedals are a really under appreciated way to shape your guitar signal.

Highs can be boosted for more articulation in overdrive. Mids frequencies can be boosted to stand out in the mix. Lows can be cut to make things less muddy. It's really endless the amount of tone shaping that can be done, as equalizer effects all the other added effects in a chain.

A very useful yet often overlooked pedal is an EQ pedal. They can be used for more than most people realize as well. You can use the JF-11 to help make your solos cut through the mix.

You could use it to tame a particularly bright or bassy guitar. You can use it to just generally beef up your guitar or basses tone as well. You could even use one on an acoustic to give you some extra tonal control and to even help prevent feedback problems.

About JOYO

• JOYO TECHNOLOGY is a professional company specializing in R&D, manufacturing and marketing digital products for music education.
• Our main products include: Effects Pedals, Guitar Amplifiers, Tube Amplifiers, Rock House, Metronomes, Tuners, EQ systems, Drum Practice Pads, Pedal Controllers, Synthesizers, Wireless Systems, Audio Cables and Portable Power Supplies.
• Through product R&D, and with the strong support of a number of industry specialists, JOYO possesses its own acoustic core technology and has applied for several utility patents. JOYO has cooperated with many famous musical manufacturers at home and abroad, and JOYO products have been received by customers with great appreciation and affection. With a young and energetic team, we are devoted to being the forerunner of professional digital products for music education all over the world. That's what makes JOYO an excellent choice!

Product description

The GEB-7 is a seven-band equalizer created specifically for the frequency range of the electric bass. Since the frequency range extends down to 50Hz, The GEB-7 is also great for adjusting depth and bottom end of an upright bass with pickups.

• Model# GEB7

User questions & answers

Question:	Is there a significant difference between this and the Boss GE 7 for guitar
Answer:	No, the GEQ-215 is not equipped with an input voltage selector switch. In order for this unit to function in regions with 220V circuitry, a third party step down transformer to 110V AC 60 Hz must be used.
Question:	does this pedal increase the noise level
Answer:	Given that it's rack-mountable and runs on 120 VAC, I'd say it's intended use is neither: live sound (club, church...) reinforcement. But it could also be used at home. The form factor, plus the AC requirement would make use in a vehicle difficult!
Question:	Parent of a bass player, he wants a pedal for looping and distortion. Does this pedal do that
Answer:	Yes
Question:	does the power supply come with the pedel
Answer:	Hi, the 50hz knob will affect the sub response. If you have any other questions feel free to contact our tech support at (323)-231-3525 or you can also email us at [email protected]. Thank You.

Product description

Product Description:



BASS-EQ

Smallest Bass graphic equalizer pedal in the world

5-Band Graphic EQ with master level control

Frequency Centers: 62.5Hz, 125Hz, 500Hz, 1kHz, 4kHz

±18dB adjustable gain range per band

ZInc Alloy metal shell

Very small and exquisite

True bypass



Specifications

Input: 1/4” monaural jack (impedance: 470k Ohms)

Output: 1/4” monaural jack (impedance: 1k Ohms)

Power Requirements: AC adapter 9V DC (center minus plug)

Current Draw: mA

Dimensions: 95mm (D) × 45mm (W) × 53mm (H)

Weight:278g(with box)



Packaging:

1X Bass EQ Pedal

1X User Manual

• 5-band graphic EQ with master level control,±18db adjustable gain range per band.
• Adjustable frequency band: 62.5hz, 125hz, 500hz, 1khz, 4khz, meet common frequency band requirements
• Very clear: No noise. Volume knob for flexible volume adjustment.
• Easy Carry: This Equalizer pedal has a small size body, light weight, suitable for out side gigs,powered by a DC 9V adapter (not included in this package)
• Solid Quality: True bypass provide transparent tone, durable and sturdy.If you receive an unsatisfactory product, please contact us for a solution.

User questions & answers

Question:	I get a pop sound when i hit the on/off switch, while using my stax guitar booster pedal. any way around that ? thanks
Answer:	You could try to use a different power supply. Chances are it won't make a difference. Some guitar pedals have noisy foot switches, even more expensive ones made by the high end brands such as MXR or Electro-Harmonix.

Product description

Specifications:

Brand: ammoon

Model: EQ7

Input: 1/4" Monaural Jack (Impedance: 510K Ohms)

Output: 1/4" Monaural Jack (Impedance: 1K Ohms)

Power Supply: DC 9V

Working Current: 10mA

Item Size: 4 * 9.5 * 3.5cm / 1.6 * 3.7 * 1.4in

Item Weight: 154g/ 5.4oz

Package Size: 10.5 * 6.2 * 5cm / 4.1 * 2.4 * 2in

Package Weight: 170g / 6oz



Package List:

1 * Guitar Equalizer Pedal

1 * User Manual (English & Chinese)

• 【7 Band EQ Pedal】: Each band provides a range of ±15dB to adjust the frequency response curve of electric guitar.
• 【7 Frequency Centers】: 63Hz, 125Hz, 250Hz, 500Hz, 1.0KHz, 2.2KHz, 5KHz.
• 【True Bypass】: This mini equalizer pedal with true bypass provides transparent tone, minimize the tone loss to keep the best tone quality.
• 【Solid Construction】: Aluminum alloy body, durable and sturdy, with a ON/OFF LED for indicating effects or bypass status.
• 【Power Supply】: DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center)(Not Included). If the EQ pedal you received doesn't turn out to be what you expected, please let us know, we'll replace a new one or give a full refund to you during 3 months.

User questions & answers

Question:	Is this going to come with a us ac plug or an eu plug
Answer:	I have read a few reviews that indicate that some received the EU adapter. I can say I just got this a couple weeks back or so, mine was shipped with the U.S. supply. So far I have been pleased with this purchase.
Question:	You have 8 500ma outputs. will this run 8 pedals rated at 500ma each? or is it limited by the 2000ma power supply. thanks
Answer:	To run 8 outputs at 500mA @ 9Vdc will require a supply that is capable of 36Watts output. The input is marked as only 2A @ 12Vdc or 24Watt. If the supply only gives you 24W max then you cannot get 36W with all 8 outputs drawing 500mA.
Question:	Does this eliminate RF interference
Answer:	No, RF interference would be most likely in your signal chain not power. Use high quality shielded patch cables on your pedal board and your instrument.
Question:	will this fit on the underside of a pedaltrain classic
Answer:	No familiar with pedtrain, it is one of the smaller pedals

Product description

Fine-tune Your Guitar’s Tone with This Flexible EQ

• 10-b EQ Effects Pedal with Stereo I/O
• Octave Extend Function
• 8 Onboard Presets
• +12dB Clean Boost
• +/-18dB Range

Product description

Each band provides +/-18Db range to help you find your favorite tone. Frequency band; 100Hz, 200Hz,300Hz,400Hz, 800 Hz, 1.6MHz and 3.2MHz. Powered by a 9V Battery or 9V adapter. This is a very well electrically designed and mechanically rugged pedal, at a great price!!!

• Each band provides 18Db± range to help find favourite tone
• This equalizer can exponentially improve the range of sound
• The output will be transformed into a more warm and natural sound
• Frequency band: 100Hz, 200Hz, 400Hz, 800Hz, 1.6MHz, 3.2MHz
• True bypass design to minimize the tone loss

User questions & answers

Question:	When I play mine it has the radio going on in the background is their anyway I can fix it
Answer:	Is this the only pedal in your chain that picks up radio? It could also be a cable with poor shielding. But mine does not do that.
Question:	How much background hiss does it add to your signal
Answer:	Doesn't add any particularly noticeable hiss. But many EQ's will do that if you use it to boost level, so I'm sure it does to an extent. I had a BOSS GE-7 for years, and that was one thing I didn't like about it. The Joyo JF-11 is MXR-style, and does not have an independent level control, though it will boost or cut volume if you have bandwidth parameters set in a +/- range as an aggregate.
Question:	Are there detents in the sliders (i.e. stops) at the 0dB mark on this pedal? It seems strange that they haven't even included dB level markers at all
Answer:	Yes there are stops in the middle at zero- I use this pedal as a boost pedal- works great-
Question:	does it come with an 9v adapter
Answer:	No. Very few pedals do. At this price an included adapter would be highly unusual. I consider this pedal a great bargain.

Product description

SUPER CLEAN SOUND - High quality IC chip and electronics used inside. No noise, no distortion, no hum... 

5 BANDS EQUALIZER - From bass to middle to treble at frequencies 100Hz, 250Hz, 630Hz, 1.6KHz and 4KHz. Each frequency plus or delete 18dB maximum. 

LEVEL CONTROL - Easy to increase or decrease sound level of equalized output. 

NANO SIZE, BIG SOUND - Only ⅔ of small iPhone size. Beautiful case design looks like a cherish jewelry. 

EASY USE - Compatible to any 9V, negative tip effect pedal power adapters. Absolutely true bypass.

• SUPER CLEAN SOUND - High quality IC chip and electronics used inside. No noise, no distortion, no hum...
• 5 BANDS EQUALIZER - From bass to middle to treble at frequencies 100Hz, 250Hz, 630Hz, 1.6KHz and 4KHz. Each frequency plus or delete 18dB maximum.
• LEVEL CONTROL - Easy to increase or decrease sound level of equalized output.
• NANO SIZE, BIG SOUND - Only ⅔ of small iPhone size. Beautiful case design looks like a cherish jewelry.
• EASY USE - Compatible to any 9V, negative tip effect pedal power adapters. Absolutely true bypass.

User questions & answers

Question:	Will this work in a bass guitar
Answer:	yes, you can use it for your bass guitar.
Question:	Will this pedal make my electric guitar sound like an acoustic? hopefully
Answer:	No, it will not. Search this one up or another like it. Koogo Guitar Acoustic Pedal
Question:	Can the acoustic pedal be used with an acoustic guitar to enhance the natural acoustic sound though PA
Answer:	It would probably work better with an acoustic than an electric. I have not run it through the PA yet. And I have not had much luck getting it to make the electric sound like an acoustic. I also have the boss ac-2 and ran it through PA with electric, recorded great. But that is much more expensive. And there is the Mosaic by Digitek to make it sound like a 12 string, but that is $90, so I haven't bought that yet. From what I know now as a very new purchaser, I would say yes to your question, it will probably enhance it.
Question:	Dose it come with power cord
Answer:	No it does not... good news its uses a regular 9v adapter

Product description

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple Setups for instant recall. All 200 Series pedals feature premium audio quality with 32-bit AD/DA, 32-bit internal processing, and 96 kHz sampling rate, as well as support for additional control via external switches, an expression pedal, or MIDI.

From the Manufacturer

The EQ-200 is the most flexible compact EQ ever created for guitar and bass. It features two wide-ranging 10-band EQ channels, plus an onboard graphic display that shows the current EQ curve at a glance. Selectable signal flow structures configure the channels for stereo, parallel, or series operation, and it’s even possible to patch in external pedals for deep pre/post tone shaping. Going further, the frequency centers of all 10 bands can be set to three different types, letting you optimize the EQ-200’s performance for different instruments.

• Class-leading sound quality with 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate
• Dual 10-band EQs that can be used in stereo, parallel, or Series
• Insert function for processing external effects with pre And/or post tone shaping
• Three different range settings: 30 Hz to 12.8 kHz, 32.1 Hz to 16 kHz, and 28 Hz to 14 kHz
• 15 dB boost/cut on each band, plus overall level control for each channel

User questions & answers

Question:	would this pedal displace a noise gate due to its clarity and qualify
Answer:	No you can't. Even the other functions (Low-Cut, Level) are applied to both channels simultaneously. At the extremely low price you could always get two units, one for each channel but Left and Right channels are almost always treated identically anyhow.
Question:	Do the boss 200 series pedals sound better combined together than say the pedal combined with built in effects in my amp
Answer:	Unless a professional hearing-loss test has determined that you have a hearing loss in some portion of the normal hearing spectrum 30 Hz to 15000 Hz in one or both ears, as opposed to a general hearing-loss across the entire spectrum, a graphic equalizer such as the FBQ800 cannot help you. What is more, you would need an equalizer that had a separate set of controls for left channel and right channel which the FBQ800 does not have. Moreover, there is no provision on the FBQ800 for headphone connection and in any event you would some kind of audio frequency amplifier equipment. If you are experiencing general high frequency hearing-loss due to age, an audio equalizer with provision for earphone connection and some form of audio amplifier would help you. Good luck..........W.N.
Question:	Boss doesn't stand by the use of third party psu for warranty. anyone have issues with it? 9v, 225ma min. on a pedalboard power supply
Answer:	Yes. On the back there are two options for input and two options for output. Those can be either guitar plugs or the typical red/white RCA plugs (left and right channel). You run your source signal (iPad, phone, cd player, etc) through the input on the back of this EQ and then run the output on the EQ to your amp, which would then be connected to your speakers. Personally, I find this extremely mobile EQ to be perfect for connecting between my iPad headphone jack (to the Behringer input on the back) and my ION Block Rocker boom box speaker which is battery operated or powered from an AC outlet. The Behringer does have to be plugged into an AC outlet in order to function. Otherwise I could use the hole system without any electricity around. Look into the ION. It is a fabulous stand alone speaker which can be found at Sams or online for around $125 to $150. And when you tweak it with the Behringer, it is a fantastic combo.
Question:	Can eq-200 be use as a microphone input eq
Answer:	Thank you for your question. No, the GEQ-215 sliders are not LED lit, the center of the fader is white plastic.

Product description

The Wampler Pantheon Overdrive Pedal was inspired by the long-discontinued, long-sought-after Marshall Bluesbreaker Stomp box…. and the many now - legendary pedals that have followed its ”transparent” path. The Wampler Pantheon gives you all the unmistakably British break up and tonal nuance found in the best of these revered circuits…. But with some fresh features and modern functionality which are all WAMPLER.

• Inspired by the long-discontinued, long-sought-after Marshall Bluesbreaker Stompbox
• Features all the British break up and tonal nuance found in the best of these revered circuits with some fresh features and modern functionality
• Designed with a powerful EQ section to tailor your sound for any gig
• Active Baxandall bass control allows you to match with any cab and fill up any room
• A delicious Presence control adds just the right amount of sparkle & sweetness
• Front mounted Gain Structure & Voicing Controls allow instant access to different harmonic and overtone structures
• Plays nice with any rig and modern tone-tools, retains the personality of your playing, AND delivers everything from sweet and creamy push to cranked British Grind

User questions & answers

Question:	I need a great fuzz pedal that fits into my boss pedalboard, with the boss dimensions/footprint? will this one fit? i hear it's good
Answer:	Yes. It’s an excellent pedal.
Question:	Mine did not come with a power supply cord. why
Answer:	Unless it was noted otherwise and you also had a power supply promised power as part of a bundle or promo, it doesn’t come with a power supply.
Question:	Whic pedal is everyone talking about? you must state which one because amazon groups all of the reviews together regardless of whic your talking abou
Answer:	Wampler Velvet Fuzz. I love this little monster.
Question:	I need a great fuzz pedal that fits into my boss pedalboard, with the boss dimensions/footprint? will this one fit? i hear it's good
Answer:	I love all my Wampler Pedals but this was the first I sent back. I never could get the tone I wanted and the fuzz was way too much. I would go with a different pedal.

Product features

Wampler Pantheon

The Pantheon Overdrive plays nice with any rig and modern tone-tools, retains the personality of your playing, AND delivers everything from sweet and creamy push to cranked British Grind. Its powerful EQ section tailors your sound for any gig. The active Baxandall bass control can match any cab and fill up any room. The Presence control adds just the right amount of sparkle & sweetness, and Gain Structure & Voicing Controls allow instant access to different harmonic and overtone structures.

Bass

Straight up at noon is unity. From there you can either add some low end in or take it away. This active control will fatten your tone right up or when you bleed it out make your tone as cutting through the mix as you can.

Treble

High end... Find the balance with the bass control with this, balance that tone.

Presence

This is the one you’re gonna have to watch. We think that most players will leave this all the way off, and only those who dare to venture into the realms of darker and more mysteriously moody set ups will need it.

Volume

Consider this the LOUD knob. The more you turn it, the more you loud you get. We think most guitars will achieve volume unity at about 12 o’clock, but yours may be slightly different.

Gain Level and Overdrive Voice

Gain Level - 3 levels of dirt. At the bottom you get a regular amount, the original amount. At the top, you get the modified amount – the young pretender’s version - in right there in the middle is the high gain version. Faces will be melted. Names will be taken.

Overdrive Voice - Brian has perfectly crafted three independent overdrive voicings (soft clipping, hard clipping and both) for you that are classic and contemporary BB style tones. In order to enjoy the full versatility of the Pantheon, it is best to tweak this control along with the ‘Gain Level’ switch... for the classic, original, BB tone have both switches in the down position. For the newer modded tone it’s best to have the ‘voice’ setting in the middle and the ‘Gain Level’ down - For those higher gain sounds, put the gain switch in the middle and then try the voicings all the way into that rabbit hole of tonal perfection...

Gain

The home of the dirt. The more you turn it, the more dirt you get. This control is extremely susceptible to the EQ stack and of course, the switches. If you set it someplace and then play with the EQ or one of those switches, this might need a little tweak to bring it back to where you like it.