14 best diamond compressor pedals

Product description

Diamond Compressor - Opto Comp w/ EQ

• Diamond Compressor - Opto Comp w/ EQ

User questions & answers

Question:	I have a single coil strat and fender silverface champ.is the pedal noisy? i am wanting a tighter more biting trebley tone at times,will this work
Answer:	No noise from this pedal at all, though it very well could enhance the noise off of your singles. Compression is top notch and would certainly give your Strat more bite. I have a Fender Johnny Marr Jaguar and I wouldn't trade this pedal for any other--it's the best.
Question:	Does this come with an AC adapter (or does one need a pedal board)? Thanks for any help
Answer:	It does not come with AC adapter...you could get something like a multi power supply combo and a pedal board which I did with the Diamond.
Question:	Since the attack time is not variable but instead is preset, is the attack pre- setting satisfactory and not too quick to start compressing
Answer:	Since it's an optical compressor, it's much more transparent (even at higher comp settings) than say, a Ross-type compressor like an Xotic SP or anything trying to be noticeablely squishy. It sounds fantastic and could easily be an "always-on" pedal depending on the application. In fact, whenever I am playing clean, I always have it on. But I lose it for my overdriven sounds because I don't like sacrificing the attack and transients that happen with my main overdrive pedal (J Rockett Archer Ikon).

Product description

Recording studios often use rackmount "vocal channels"; a mic preamp, compressor, and EQ all in one unit as a front end for vocal recording. The Diamond Compressor is Diamond's take on a "guitar channel". It's a dynamics and tone shaping tool for live and studio use, constructed with low noise, ultra linear signal buffering, smooth opto based compression, and a versatile "tilt" EQ that musically shifts overall frequency balance. All in a user-friendly 3-control package - just Comp, EQ and Volume.

• Post-compressor 'tilt' EQ provides a very musical tailoring of frequency response - seamlessly transition from a darker jazz voicing to a brighter jangle, with flat frequency response at the center detent position.
• Premium audio components, including 2% polypropylene capacitors,1% metal film resistors and a pro audio grade opamp (our signal path opamp alone costs 8 to 10 times what the industry norm uses).

Product description

Following in the footsteps of the original BCP1, the new Bass Comp Jr offers the same high quality optical compression and a simple but effective Tilt style EQ control with selectable center frequency (900Hz or 250Hz), an extended frequency response and high headroom to suit a wide variety of passive or active 4/5/6 string basses. All in a smaller, more pedalboard friendly package that is compatible with a wider range of pedalboard power supplies. The Diamond Bass Comp Jr is designed to be powered from either a 9V battery (included), standard 9V negative tip DC power adapter or from a multi pedal power supply. However, for maximum headroom and tone, we recommend using a negative tip, 18V power supply. Current draw of the Bass Comp Jr is very low- only 20mA.

• Selectable 250Hz or 900Hz EQ tilt point
• Optimized gain staging and use of ultra low noise transistors and opamps in the signal path for lowest possible noise and extended signal headroom
• Premium audio components, including Elna electrolytic capacitors, 2% film capacitors and 1% metal film resistors
• Bi-color LED provides visual indication of depth of compression
• True Bypass operation

Product description

This product has been played/demoed in store, used to make promotional materials, or returned in great condition. It may be missing its original packaging or inserts or show very slight signs of use. This item is backed with the same return policy and satisfaction guarantee as a new product, making it a risk free purchase.



Diamond Pedals Comp Jr. When we began work on the original Diamond Compressor back in 2004, our goal was to build a versatile guitar channel a dynamics and tone shaping tool to front-end your effects chain much like the gain, compression and EQ channels used in traditional recording studio mixers. Introduced at MusikMesse 2005 in Frankfurt, the Diamond Compressor has found its way onto thousands of pedal boards worldwide and our sincere thanks to all those who have supported us over the years. Since introducing the original comp, weve released a version tailored to the bass (the Bass Comp), as well as a special audiophile edition of the comp called the Comp SE. Throughout this time, weve also had many requests for a more compact version of the original Diamond Compressor Now introducing the Diamond Comp Jr! Diamond Pedals Comp Jr. Features: vactrol opto-isolator variable resistance path as used in high-end studio compressors for smooth attack and decay characteristics while preserving initial signal transients. post-compressor tilt EQ provides a very musical tailoring of frequency response seamlessly transition from a darker jazz voicing to a bright jangle, with flat frequency response at the center detent position. optimized gain staging and use of ultra low noise transistor and opamps in signal path for lowest possible noise and extended signal headroom. premium audio components, including tight tolerance Panasonic PPS capacitors and metal film

• Cactrol opto-isolator variable resistance path as used in high-end studio compressors for smooth attack and decay characteristics while preserving initial signal transients.
• Post-compressor tilt EQ provides a very musical tailoring of frequency response seamlessly transition from a darker jazz voicing to a bright jangle, with flat frequency response at the center detent position.
• Optimized gain staging and use of ultra low noise transistor and opamps in signal path for lowest possible noise and extended signal headroom.
• Premium audio components, including tight tolerance Panasonic PPS capacitors and metal film resistors.
• Top mounted jacks on a small enclosure for tight pedalboard layouts.

Product description

This product has been played/demoed in store, used to make promotional materials, or returned in great condition. It may be missing its original packaging or inserts or show very slight signs of use. This item is backed with the same return policy and satisfaction guarantee as a new product, making it a risk free purchase.



Diamond Pedals Bass Comp Compressor Now Shipping! The original Diamond Compressor has become one of our most well known products, loved by players for it's smooth response and ability to enhance your instruments tone. Turns out that bass players have discovered the Compressor (many via it's discussion on the TalkBass online forums) and while it generally works great for 4-string passive basses, the performance with 5/6 strings and high output active basses was less than ideal as the frequency response and headroom was optimized for guitar use.



Our response to that interest is the new dedicated Bass Comp, the first Diamond pedal designed specifically for bass players. With low frequency response extending down to 20Hz and increased headroom, the Bass Compressor is ideal for 4/5/6 string basses, both active and passive.



We've also revoiced the Tilt EQ control, offering bassists the choice of the original 900Hz tilt point or a new 250Hz setting, accessible via a mini toggle. Diamond Pedals Bass Comp Compressor Features: Smooth, optical compression/limiting Premium audio components, including 2% polypropylenecapacitors,1% metal film resistors and a pro audio grade opamp (our signal path opamp alone costs 8 to 10 times what the industry norm uses). Innovative 'tilt' EQ provides a very musical tailoring of frequency response - selectable 900Hz or 250Hz tilt point Dual AC capacitive coupling paths for improved transient response True bypass signal path 18V power

• Diamond Pedals has a full five year parts/labor warranty on all pedals.

Product description

Type:Compressor



Specifications:

- Brand: KOKKO

- Model: FCP2 COMPRESSOR(Mini)

- Main Material: Aluminum Alloy

- Input Impedance: 1M Ohms

- Output Impedance: 10K Ohms

- Power Supply: External AC adapter delivering 9V DC regulated minimum 300mA

- Item Size: 9.4cm * 5.1cm * 5.3cm

- Item Weight: 180g

- Package Size: 11cm * 7.1cm * 6.7cm

- Package Weight: 214g / 7.5oz

Package List:



- 1 * Guitar Effect Pedal

- 1 * User Manual(English)

Note:



- Please do not use the pedal in high temperature, high humidity or subzero environments.

- Please do not use the pedal in the direct sunlight.

- Please do not dissemble the pedal by yourself.

- Please keep the manual for future reference.

User questions & answers

Question:	Does it come with power supply cord
Answer:	No it does not.

Product description

Compressor Plus. The Keeley Compressor Plus will help you on your quest for achieving the very best tone. This pedal will smooth out your sound, polish your tone, make your sustain sing and breathe new life into each note you play. The sustain from the Keeley Compressor Plus blossoms and blooms like tube amp compression. The Compressor Plus has the precision of a studio rack mount JFET compressor, but fits conveniently on your pedalboard, so you can take it with you wherever you go. The Plus offers you a blend that gives you the transparency and freedom of the world's greatest levelers and limiters. Tens of thousands of players have trusted Keeley compressors for articulate, expressive sustain.

• Rackmount JFET compression in a compact pedal Sustain, Level, Blend, Tone and Attack/Release controls True bypass Made in the U.S.A.
• The Keeley Compressor Plus will help you on your quest for achieving the very best tone
• This pedal will smooth out your sound, polish your tone, make your sustain sing and breathe new life into each note you play
• The sustain from the Keeley Compressor Plus blossoms and blooms like tube amp compression
• The Compressor Plus has the precision of a studio rack mount JFET compressor, but fits conveniently on your pedalboard, so you can take it with you wherever you go

User questions & answers

Question:	Is there any significant tone differences between this model and the original keeley compressor c
Answer:	I haven’t used the original keeley before, all i can tell you that this is the best ever compressor pedal i stepped on, much better than dyna comp and xotic sp. buy it, ull love it.
Question:	Can this run on a 1 spot daisy chain type power supply
Answer:	Yes, I run mine off of one.
Question:	How many milliamps does it require
Answer:	It requires at least 10milliamps according to the instructions. I have been using it attached to a multi-output power supply at 9VDC, 100mA and it operates and sounds great. A 9 volt battery is also an option for this, but I'm assuming that's not what most are looking to do.
Question:	Where's this pedal made
Answer:	Oklahoma, U.S.A.

Product description

The MXR design team took a classic recording studio fixture and stuffed it into a pedalboard-friendly box. The MXR studio compressor features attack, release, ratio, input, and output controls So you can fine-tune your compression level-from subtle to squashing-right on stage with visual feedback from a bright LED gain-reduction status meter. Constant headroom technology provides tons of headroom for clear, transparent performance that’s as dynamic as you need it to be. It’s all packed into a durable, lightweight aluminum-housing that’s the size of a Phase 90.

• Classic studio compressor in a phase 90-sized pedal
• Cht constant headroom technology for clear, clean performance
• Ten gain-reduction status LEDs
• True bypass

User questions & answers

Question:	Is this a good compressor for vocals or should I look for one that is made specifically for vocals
Answer:	I would look at TC Vocal Comps...this is voiced for guitars and bass

Product description

JHS Pedals is proud to present the Whitey Tighty compressor, our take on the classic effect that no one may ever know is on, but when it’s off you feel like your pants are down. The Whitey Tighty is as simple as it gets while never getting in the way. At only 1”x3”, you’ll save so much space on your pedal board that you’ll be able to add to your wardrobe of effects with ease. And with the ability to blend in compression and clean signal, you’ll be able to dial in the perfect sound that keeps everything in place. The Whitey Tighty is a FET compressor that has three simple controls: Volume, Compression, and Blend. The Volume control gives you the ability to set your volume at unity gain or slightly boosted to make up for any perceived loss from the compression. The Compression knob controls the amount of compression for everything from a subtle smoothing of your tone to a pleasing squash that’s perfect for country, blues, pop, and rock. Use the Blend knob to dial in the right amount of clean tone along with your compressed signal. This allows you to retain some of the natural feel of your clean tone while giving you the studio-quality compression that brings your sound to the next level. Tighten up your tone with the JHS Pedals Whitey Tighty!

• FET compressor that has three simple controls: Volume, Compression, and Blend
• The Volume control gives you the ability to set your volume at unity gain or slightly boosted to make up for any perceived loss from the compression
• The Compression knob controls the amount of compression for everything from a subtle smoothing of your tone to a pleasing squash that’s perfect for country, blues, pop, and rock
• Use the Blend knob to dial in the right amount of clean tone along with your compressed signal
• With the ability to blend in compression and clean signal, you’ll be able to dial in the perfect sound that keeps everything in place

User questions & answers

Question:	Does anyone have experience using this with a bass guitar
Answer:	Hi, it is made of poly amide, so quite durable. no worry about it.
Question:	is the buffer always on so the switch just engages the booster
Answer:	Hello customer, Yes, the standard is two in the package, using 9V 6F 22 battery, it lasts for 2-5 hours, depends on the quality of the battery and frequency you use the device.
Question:	Hey, can this run on a battery, or only with the PS
Answer:	Hi, yes, you can search joyo jge-01 and find many videos, like: https://www.youtube.com/watch?v=p7NeaTySmw0 Thank you for visiting our store and enjoy your purchase, we have many other interesting items in our store, hope you will like them.
Question:	Where is the idea location to place this unit amongst all my other pedal on the floor? (2) Should I hold off on purchasing a Buffer
Answer:	Hi, In our package, we have one inside the device and one outside.

Product features

JHS Whitey Tighty

JHS Pedals is proud to present the Whitey Tighty compressor, our take on the classic effect that no one may ever know is on, but when it’s off you feel like your pants are down. This pedal is as simple as it gets while never getting in the way. At only 1”x3”, you’ll save so much space on your rig that you’ll be able to add to your wardrobe of effects with ease. With the ability to blend in compression and clean signal, you’ll be able to dial in the perfect sound that keeps everything in place.

Controls

The Whitey Tighty is a FET compressor that has three simple controls: Volume, Compression, and Blend. The Volume control gives you the ability to set your volume at unity gain or slightly boosted to make up for any perceived loss from the compression. The Compression knob controls the amount of compression for everything from a subtle smoothing of your tone to a pleasing squash that’s perfect for country, blues, pop, and rock. Use the Blend knob to dial in the right amount of clean tone along with your compressed signal. This allows you to retain some of the natural feel of your clean tone while giving you the studio-quality compression that brings your sound to the next level.

About JHS Pedals

JHS Pedals is the result of Josh Scott’s desire to build quality effects pedals that stand out in an over-saturated market. Started in early 2007 by way of a DIY repair to a Boss Blues Driver, JHS Pedals has evolved into an effects pedal company recognized world-wide. Josh’s years of touring and session work along with eventual electronics tinkering bring the experience and knowledge of what musicians need and want in their rigs, and that is one of the core values that JHS was built upon.

With a complete electric guitar, bass guitar, utility, and Mod Shop, JHS Pedals offers one of the broadest lines of effects on the market today. We value and commit to designing, populating, and assembling pedals that sound excellent, are easy to use, and work correctly.

• Compressor Pedal with Classic optical compressing sound with smooth attack and decay, it preserves the original signal transients perfectly
• This guitar compressor is Very small and exquisite,Full metal shell，great made and affordable
• The circuit of this guitar compressor pedal has been optimized according to the characteristics of the electric guitar and performs outstandingly over the spectrum of different playing styles
• Easy to Operate, with 3 function knobs, LEVEL, EQ and COMP. You can just control three function knobs and choose the model you want to made you own music tone. Enjoy your own fun and colorful life.
• Package Included:1x Compressor Effect Pedal.1 pairs of adhesive backed hook-and-loop

User questions & answers

Question:	Can it run on a 9v battery
Answer:	Many of these micro pedals do not have a battery compartment but will run on a battery w jumper - some come w cable from battery to pedal
Question:	Will it come with a cable
Answer:	The cable comes with no cable or power source. You must purchase a nine volt power supply and a second guitar cable. Guitar into pedal. Pedal into amp input.
Question:	How long is the maximum amount of this delay pedal
Answer:	hello, it between about 25ms-600ms of delay time.
Question:	will this delay pedal change the tone of this clean sound through the amp
Answer:	The tone will be different unless bypassed. For my amp the tone is a bit brighter when the pedal is on. It’s a 2.3 watt tube amp with an 8inch alnico speaker.

Product features

Features

MIMIDI Compressor Guitar Pedal

LED Light：LED indicator shows the working state.

True Bypass：True bypass for zero tone coloration.

Full metal shell：Aluminum-alloy classic, stable and strong.

Wide range of uses: Perfect pedal for ambient/experimental guitarist’ performance

Description

1.EQ Knob

2.Power Supply Input: 9V DC

3.COMP Knob

4.Intput Jack

5.Footswitch

6.Output Jack

7. LED Light

8.LEVEL Knob

Specification

Power Requirements: AC adapter 9V DC (center minus plug)

Current Draw: 30mA

Input & Output Jack：Analogy though 1/4’’ mono audio jack.

3 Knob :COMP,EQ,LEVEL

Package included: 1xMimidi Compressor Effect Pedal;

1xpairs of adhesive backed hook-and-loop for keeping your guitar pedals on your pedal board

Introduction:

MIMIDI compressor effect pedal

Level Knob：Control the sound volume with effect.

EQ Knob：Control the tone of sound.

COMP Knob：Adjust the intensity of compression.

Full metal shell：Aluminum-alloy classic, stable and strong.

True Bypass：True bypass for zero tone coloration.

• 1.TLevel ,Comp,Tone knobs allow you to dial in your desired sound.Two modes:Normal and Treble compression
• 2.Our circuit has been optimized according to the characteristics of the electric guitar and performs outstandingly over the spectrum of different playing styles
• 3.The compressed tone is round and smooth,full of musicality, and perfectly retains the original guitar tone
• 4.Whole Aluminium-alloy classic, stable and strong.True bypass provide transparent tone.
• 5.DC 9V Adapter power supply. Working Current: 12mA

User questions & answers

Question:	Can this be used on a Bass guitar
Answer:	Yes it can! I just got mine today and tried it out on an Epiphone EB-0 bass which took that super fat bass sound and enhanced the attack, smoothed out the dynamics and gave a nice overall boost to the sound. I had similar results with an Ibanez 5 string that has passive single coil pickups. I was originally looking at a couple other compressors that have a blend knob on them. This comp was so inexpensive I figured I would try it anyway and if I did't like it I wouldn't be out much money. Well it turns out I really like this pedal and I don't need one with a blend because this one does the job in a transparent sort of way that I like. With all knobs at the 12 o'clock position and the treble switch in the up position this little guy works well for my bass sound. The size is nice too.
Question:	I'm fairly new to compressors. Will this pedal help with sustain on clean slide playing? (Live not studio
Answer:	without a doubt YES! Listen to any of the first five or so Little Feat albums. That is Lowell George on electric slide. His signature tone used fairly heavy compression to cop wonderful clean sustain. I put my compressor first in my signal chain for the same reason. It also sweetens my overdriven solos. I would feel naked without compression in my rig.
Question:	anyone compare this with joyo and mooer compressors? thanks
Answer:	I have not compared to other compressor pedals, but for the price it is a decent little pedal with noticeable sustain/compression. I do find that main knob, the "compression" control, works well but the "level" control is very sensitive. I have to keep mine down below 10 or 11 o'clock, otherwise it just gets very loud. The toggle switch is also effective between normal and treble for a brighter tone. As for the "tone" control, this also needs to be fine tuned as anything past 12 o clock gets very bright, unless that's what you're aiming for.
Question:	anyone compare this to the behringer compressor
Answer:	I haven't compared this to the Behringer compressor but I have compared it to a MXR Dyna comp. The Behringer pedals I've had sounded good but were not very well made and crapped out on me after not much use. The Donner is a well built pedal and has a wide range of compression for the price. It is also a pretty quiet compressor compared to the Dyna Comp. I have a few of the smaller footprint pedals (Moore and Ibanez) and this one is built like a tank. For $40 it is a good purchase.

Product features

Inspired By Classics And More

The Ultimate Comp is inspired by the expensive studio rack-mount optical compressor/limiter units, representing you the iconic smooth, warm compression sound.

Easy Controls, Wide Flexibilities

The Ultimate Comp features an easy-touse three-knob tone control:COMP(compression intensity), TONE (brightness) and LEVEL (output volume) for using in different scenarios. Each knob gives you a wide control range.

Two Modes

The Ultimate Comp offers a the 2-way selector for choosing from two sound types for satisfying different musicians: Connections & Controls NORMAL: Providing a neutral optical compressor sound with warmthTREBLE: Providing a brighter optical compressor sound with more bite.

Product description

The CP-47 "PRESSURE TANK " is a new compressor pedal from Caline. Excellent for clarifying your attack and making those single runs sting. Used right, Compressors are a great addition for any type of music or player. Country pickin' to Power Chords and everything in between. Nice price and Compression response.



Specifications:

Material: Aluminum Alloy

Signal Input: 1/4″Monaural Jack

Signal Output: 1/4″Monaural Jack

Power Supply: DC 9V power adapter(center negative) or 9V battery(neither included)

Current consumption: 30mA

Item Size: 11.3 * 6.3 * 3.3cm/ 4.4 * 2.5 * 1.3in

Item Weight: 232g/ 8.2oz

Package Size: 13 * 7.5 * 6cm/ 5.1 * 3 * 2.4in

Package Weight: 275g/ 9.7oz



Note: Please use the power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.



Package List:

1 * Effect Pedal

1 * Battery Cable

• Excellent new Comprssor from Caline
• With LEVEL, EQ and COMP adjusting knobs for you to get your favorate tones.
• True bypass design
• Aluminum alloy shell.
• Dual power supply choices (9V battery or DC 9V power adapter) for convenient usage.(neither included)

User questions & answers

Question:	Can this be used for a bass as well
Answer:	Yes, but it's not optimal for bass. A bass compressor would be a better choice.
Question:	Does the 9 volt fit inside the pedal like other pedals
Answer:	It does not, there is no internal compartment for a battery, like another stated you have to plug the adapter that comes with it into the 9V DC jack on the side of the pedal, the battery hangs outside of it.

Product description

Now widely regarded as the industry standard in guitar pedal compression, the Mini Ego Compressor brings a new level of control to what is expected and needed by today's guitar players, in a mini Format.

• Brings a new level of of control to what is expected and needed by today's guitar players, all in a mini format
• Based on our original Ego but featuring switches for tone (dark and bright) and attack (slow and fast)
• Allows your original signal to be blended in so you can get all the benefits of a great compressor but with the option to remove the squash at the front by bringing the bypassed signal in
• With this pedal you can have full country squash or open studio level parallel compression
• With a comprehensive array of controls and a pure core tone, the Mini Ego works perfectly as an "always on" compressor or as "an effect"

User questions & answers

Question:	Would this work with a Mustang 1 or Champion 40 and does it come with a cable
Answer:	Yes, it will work with a Mustang 1,2,3, or 2000. It will also work with a Champion 40,50, or 1000 (... it will work with any amp). No, it does not come with a cable.
Question:	Is this v1 or v2? i'm looking for v2 with the input/output on the sides. customer's pictures in the review section shows one of each
Answer:	The larger pedal with 5 knobs is V1. V2 has 3 and a toggle for 2 knobs. It’s essentially the same only with a smaller footprint and less customization options but not many
Question:	With mini ego, getting weird drone like feedback/sustain especially on e and a notes. eq, repositioning guitar/amp doesn’t stop it. any ideas
Answer:	Ya, turn it off... lol
Question:	Does it work for bass guitar
Answer:	Yes. You can use um bass

Product features

Wampler Mini Ego Compressor

The Mini Ego Compressor brings a new level of control to your playing level. It will bring quiet parts up and loud parts down with a natural feel like a great tube amp being pushed hard. It is based on the original Ego, but it features tone and attack switches to tweak your tone to a standard of a pedal twice its size. You can also blend in your original signal so you can get the benefits of a great compressor with the option to remove the squash at the front by bringing the bypassed signal in.

Blend

At about noon on the Blend knob, the compressed signal and the (enhanced, boosted, and slightly warmed) clean signal are even in level. Because the signals are in parallel inside the pedal before mixing down to mono at the output, the Blend control acts as a mixer knob. At 50/50, your clean signal's natural note attack is almost unaffected by the Ego Compressor, but once the clean signal naturally fades, the Ego Compressor's compressed signal seamlessly fills in the gaps. This is a process no ear will hear because it's perfectly even and smooth, and the end result is all the benefits of a great compressor but a real, authentic transient.

Volume

This control adjusts the output level of the Mini Ego Compressor. There's plenty of volume on tap, so whether you want to go farther than your input level or just make sure it can do unity volume (the same level of signal going out as you feed it, when active), you're covered. The Sustain and Blend controls will have an effect on the total output volume, so you're probably better off waiting to adjust the Volume until you've dialed in the other controls. Re-adjustment might be necessary if you get it to the desired level and still need to tweak the sound.

Sustain

Sustain controls how hard the Ego Compressor works to maintain the signal within its compression threshold. Higher sustain settings will let your notes go on for a very long time, but be careful, because higher sustain settings also raise the noise floor. If you are running your compressor after overdrive or distortion, you will want to pay close attention to the Sustain knob and maybe back off of it quite a bit so as not to raise the amount of noise to unbearable levels. The Ego Compressor is quiet, by compressor standards, but when the whole point of a pedal is to take a signal, even it out, and make the quiet parts louder and the loud parts quieter, you can expect added noise as part of the process.

Classic Country Squash

Perfect for chickin' pickin'. This setting adds some extra cluck to your pluck.

Smooth Overtunes

Your great tone, but with an added smoothness and clarity that makes your guitar come alive.

Get Funky

You'll be conjuring a Disco ball with these settings.

Clean, Soaring Boost

A focused boost for your amp to fatten up your tone and pop out in the mix.

Product description

The dyna Comp mini compressor combines the best of classic tone and modern convenience in a housing that’s nearly half the size of the original. Thanks to its rare CA3080 “metal can” integrated circuit (IC), this pedal yields quieter operation, greater transparency, and increased dynamic range. An all-new attack switch toggles between slow and fast attack times.

• Classic MXR compression in a space-saving mini housing
• Features rare CA3080 “metal can” integrated circuit (IC) for quieter operation, greater transparency, and increased dynamic range
• All-new attack switch toggles between slow and fast attack times