13 best bass distortion pedals
Bass distortion pedals are a type of guitar effect pedal designed specifically for bass guitars. They are used to add various degrees of distortion or overdrive to the bass guitar's signal, resulting in a gritty, saturated, and distorted sound. Here are some key points about bass distortion pedals:
Purpose: Bass distortion pedals are used to alter the tone and texture of the bass guitar sound.They can create a wide range of tones, from subtle saturation to heavy distortion, which can be useful for various musical genres, including rock, metal, punk, and funk.
Overdrive vs. Distortion: Bass distortion pedals often come in two main flavors: overdrive and distortion. Overdrive pedals produce a warmer, smoother saturation that retains some of the original bass tone, while distortion pedals create a more aggressive, clipped sound with more pronounced sustain.
Controls: These pedals typically feature a variety of controls to shape the distorted sound, such as gain (to control the amount of distortion), tone (to adjust the EQ of the distorted signal), and level (to set the overall output volume).
Blend Control: Many bass distortion pedals also include a blend control, which allows the player to mix the clean, unaffected signal with the distorted signal. This can help maintain the low-end clarity and definition of the bass, even when using heavy distortion.
Fuzz: Some bass distortion pedals incorporate fuzz effects, which create a fuzzy, buzzy distortion reminiscent of vintage rock and psychedelic music. Fuzz pedals are known for their extreme and unique character.
Compatibility: Bass distortion pedals are designed to work with bass guitars, which typically have lower frequencies compared to regular electric guitars. They are optimized to handle the lower frequencies and prevent loss of low-end when distorted.
Signal Chain: In a typical signal chain, a bass distortion pedal is placed after the bass guitar and before the amplifier or other effects. This allows the player to shape the distorted tone before sending it to the amplifier.
Popular Brands: Several well-known brands produce high-quality bass distortion pedals, including Electro-Harmonix, Boss, MXR, Darkglass Electronics, and Tech 21, among others.
Versatility: Bass distortion pedals come in various designs, from simple stompboxes to multi-effects units with multiple distortion algorithms and additional features like EQ shaping, presets, and more. The choice depends on the player's preferences and needs.
Usage Tips: When using a bass distortion pedal, it's important to experiment with the settings to find the desired tone. Start with lower gain settings and gradually increase to avoid excessive distortion. The blend control can be particularly helpful in retaining clarity.
Bass distortion pedals can be a valuable addition to a bassist's pedalboard, allowing them to explore a wide range of sonic possibilities and adapt their sound to different musical styles.
Below you can find our editor's choice of the best bass distortion pedals on the market
COOLMUSIC C-DI01 Insane Distortion Guitar Bass Distortion Pedal
Coolmusic
- Distortion guitar effect pedal with full metal shell, durable and sturdy.
- Vintage hard clipping, retains your guitar's tone and clarity.Built-in dual gain circuit, delivers everything from overdrive to distortion.
- With LEVEL, GAIN, TONE, LOW BOOST and FAT BOOST knobs for detailed effects control.
- True bypass footswitch for crystal-clear signal thru.
- With LED light for indicating effects and bypass status.( Pls note that DC adaptor not included)
User questions & answers
| Question: | what is the maximum delay time |
| Answer: | Thanks for the interest here. Doesn't really show the specs on the exact max time but as this is a digital unit, the delay can go 1,200 ms and beyond. Nice unit for the price and a player favorite. |
| Question: | Does it work well with bass guitars |
| Answer: | Obviously it will "work" on any audio signal but will it sound good for bass? It really depends on what you're looking for but I wouldn't think so. That pedal is a real over-the-top kind of distortion which I would think would be too much for bass. You might want to do a bit more research for a pedal that is specifically for bass. |
| Question: | Can someone suggest a compatible adaptor for this |
| Answer: | I bought this one: https://www.amazon.com/dp/B00191WVF6/ref=cm_sw_r_cp_awdb_t1_RdVtCbNF1EE9C |
| Question: | Is the logistics updated in time |
| Answer: | The pedal is delivered through FBA, the logistics will be updated in time . |
Product features
Heavy Duty Metal Footswitch and Status LED
With LED light for indicating effects and bypass status. And it's really convenient to use it in the night and dark place.
Insane Distortion Pedal
It's a a metal guitar effects pedal, amazing tone without noise, best choise of distortion pedal for electric guitar and bass.
Tiny Size with Metal Housing
The size of the pedal is 4.9 * 2.8 * 1.8in, and the net weight is 220g, it's easy to carry. Solid case is made of strong metal.
Rowin Plexion Distortion Pedal for Guitar & Bass with Bright and Normal Mode True Bypass
Product description
To check out how it sound from here:
https://www.youtube.com/watch?v=_b_yv9aV_m0
Description:
It's easy to use the controls on the Plexion pedal thanks to its convenient layout and each control has a unique way of shaping your sound to suit you. There are three knobs that control Gain, Tone and Volume, as well as a toggle switch to flick between Bright and Normal sounds, and a true bypass footswitch control to finish.
The toggle switch has two options of either Bright or Normal. Using the Bright channel allows you to enter into classic rock to late 80s and early 90s rock territory depending on just how much gain you wish to apply. To go that extra step further into creating blistering lead tones, just turn the gain up to full and hear that roaring sustain that we all know and love when you're really testing an amp to the limit!
The Normal channel is by no means average by any stretch of the imagination, just adjust the gain, tone and volume dials to get the desired output and you will be amazed by its rich, full-bodied output that sounds just as good clean as it doesn't heavily distorted.
Specifications:
1.DSP:32 bit floating point,Sampling: 44.1kHz/24bit
2.Input & Output Jack：Analogy though 1/4’’ mono audio jack.
3.Power Supply: DC 9V (Plug polarity is Positive on the barrel and negative in the center ).
4.Working Current: 100mA.
5.Dimensions: 95(D)*45(W)*48(H)mm.
6.Weight: 273g(With box).
Package included:
1 x Rowin Plexion Guitar Effect Pedal
1 x User’s Manual
1 x gift box
- 【Classic Plexion Distortion】It is a modelling pedal which mirrors the original Plexi amps.Three knobs control the Gain,Tone and Volume.Toggle switch toggle between Bright and Normal sounds.
- 【2 WORKING MODES】:Normal and bright. Using the Bright channel allows you to enter into classic rock to late 80s and early 90s rock territory depending on just how much gain you wish to apply. The Normal channel is by no means average by any stretch of the imagination, just adjust the gain, tone and volume dials to get the desired output and you will be amazed by its rich, full-bodied output that sounds just as good clean as it doesn’t heavily distorted.
- 【SOLID CONSTRUCTION】Made of high-quality zinc alloy, durable and sturdy.
- 【TRUE BYPASS】True bypass provide transparent tone.LED indicator shows the working state.
User questions & answers
| Question: | will it kill the tone? Wil the stustain be there still? thanks |
| Answer: | I have not noticed any loss of tone But it does reduce most of the the noise from the pedalboard |
| Question: | can you get rid of the radio noise interference somehow |
| Answer: | I dont have radio noise with this device. However it depends on your setup. I have this pedal on my board and it is after my tuner, compressor and overdrive pedals. I also have 6 other pedals after this one. I am powering everything with a MXR M238 power brick. And I am plugging the power brick into a furman PT-6 power conditioner. I have little to no noise interference. My setup is pretty quiet. You might need to do some trial and error. I would start with the power conditioner to see if it removes the noise coming from the wall outlet. After that I would look at a noise gate pedal. This will cut the noise when you are not playing. THe donner Noise killer is a great cheap pedal or a ISP technologies Decimator is a industry standard but more expensive. There are other options also. And is that still does not do the trick look into an isolated power supply. This you might need to spend a few bucks on because most of the ones that are cheap are not a true isolated power supply. |
| Question: | Does the pedal come with its own cord |
| Answer: | No. It does not. 9V battery will NOT work. I bought the power adapter from Amazon as well. |
| Question: | Does this go pre or post dirt in the signal chain |
| Answer: | I would use it at the end of your chain . . .the only thing that I use after the noise gate is a delay pedal . . . . so basically all your pedal should be set up first with the noise gate at the end . . except for a delay . . . . . if you find that your delay is noisy then put the noise get the very last pedal |
Source Audio Aftershock Bass Distortion Pedal
Source Audio
Product description
The Only Bass Distortion Pedal You Need
- Dry/Wet Blend Controls; USB; and Free Neuro Apps for iOS
- Bass Distortion Pedal with Tube
- Fuzz Overdrive Engines; Drive
- Android
- Windows
User questions & answers
| Question: | Does the pedal have a 9V battery compartment or does it only run on an external power source |
| Answer: | Only an external power source but it comes with a power supply.thanks! |
| Question: | Will this thing stop the ping in my amp if I'm off on a string i can hear it sounds terrible I'm a real beginner just need some advice |
| Answer: | No. You need to practice more. Maybe find a local teacher and take a couple of months of lessons. There are things you will learn to do right with a real person that you will never learn online. This pedal then will help you sound ferocious and it will be awesome! |
| Question: | Does it connect to your phone or do you have to buy other components for that |
| Answer: | It comes with short cord to connect to the phone. |
| Question: | Does is come with a power source |
| Answer: | Yes, standard power source. |
Distortion Guitar Pedal, Mini Effect Pedal Processor of Classic Distortion Tone Effect Universal for Guitar and Bass, Exclude Power Adapter - KOKKO (FDS2)
kokko
Product description
Specifications:
- Brand: KOKKO
- Model: FDS2 DISTORTION(Mini)
- Main Material: Aluminum Alloy
- Input Impedance: 1M Ohms
- Output Impedance: 10K Ohms
- Power Supply: External AC adapter delivering 9V DC regulated minimum 300mA
- Item Size: 9.4cm * 5.1cm * 5.3cm
- Item Weight: 180g
- Package Size: 11cm * 7.1cm * 6.7cm
- Package Weight: 214g / 7.5oz
Package List:
- 1 * Guitar Effect Pedal
- 1 * User Manual(English)
Note:
- Please do not use the pedal in high temperature, high humidity or subzero environments.
- Please do not use the pedal in the direct sunlight.
- Please do not dissemble the pedal by yourself.
- Please keep the manual for future reference.
- EFFECTS - Classic distortion tone. True bypass. stage distortion design provides higher degree of distortion.
- LED INDICATOR - LED indicator shows the status of effect. No battery, Powered by AC adapter(not included).
- ANTI SKID - Rubber pads on the backside is anti-skid, which enhances the stability and avoids friction.
- RELIABLE QUALITY - High quality by aluminum alloy which is durable and have a classic mini size brings you a musical feast.
- RESONABLE PRICE - Provided the very reasonable price to match the high quality product, you will not regret it.
User questions & answers
| Question: | Is this optical, vca, or fet compression |
| Answer: | Not SO heavy, if the amp is totally clean it can get it nice and dirty, a littler crunchy. Blues/rock tones. I use it as a boost in front of a high gain head. If you're looking for a real heavy pedal try an OCD or a Maxon OD808. |
| Question: | What exactly does a compressor pedal do |
| Answer: | Yes, but it will add some mid range, in a good way tho. |
| Question: | Works great on bass |
| Answer: | Generally, I turn the amp on first. I am not sure if there is an order, but, it has never led me astray. Same order reversed for turning off. |
| Question: | Whats the difference between compressor and distortion |
| Answer: | It doesn't come with any patch cords and it runs on a battery (although you can get an adapter for it) |
BOSS Guitar Chorus Effects Pedal, yellow (ODB-3)
BOSS
Product description
The ODB-3 Bass OverDrive delivers the chest-resonating distortion that hard rock, thrash, and punk bassists have been waiting for. This hot compact pedal has been designed specifically for bass applications.
- Get mild overdrive to hard distortion Works for four- and five-string basses Balance control lets you mix signals Can be used as a two-band EQ
User questions & answers
| Question: | how to possibly eliminate the "buzz |
| Answer: | Yes , you can but we also make dedicated electric guitar Fly Rigs. The original Fly Rig and the RK Fly Rig. feature set more appropriate for guitar vs bass. |
| Question: | The item title is listed as "chorus," but everything else seems to indicate "bass overdrive." Is the title just incorrect |
| Answer: | I haven't used a V2 sansamp driver. I used someone else's V1 a while back. Unfortunately I can't remember how that compares to the character knob on the Fly Rig. I will say that it seems to be very versatile in sound. You can a really boomy low end SVT sound or go very clean and modern. Don't know if that helps |
| Question: | Can this cut out the bass signal by being turned on and off |
| Answer: | You can use the app on your phone or tablet. I think the connection is stronger and the interface easier to use on the computer. You can do dip editing on the computer to create patches and do on the fly editing with the app, which is what I would do. |
Koogo Heavy Metal Distortion Pedal Holy War Effect Pedals for Electronic Guitar Bass with 3 Modes Hi Boost/Low Boost/Boost Off True Bypass
Product description
"Koogo Music" Is a professional manufacturer of guitar pedals, specializing in r&d: Mini pedals, double step effects, drum machine looper pedals, digital pedals,analog pedals,multi-effect pedals,guitar tuner, capo etc.
OUR PRODUCTS:
pedal series: Distortion,Overdrive,FUZZ,Flanger,Phaser,Delay/Echo,Chorus,Reverb,Dumbler,Acoustic,Guitar EQ,Bass EQ,Booster,Slow Hand,Trill,Looper,Auto Wah,Octave,Harmonizer,Mod Station,Guitar Tuner,Noise Gate,Compressor etc.
Wireless guitar system: WS10, WS20, WS30;
Multi-Way power supply:PW-1
Multi-Effect Pedal:DAP-1,DAP-2,DAP-3
“Koogo music” is the only professional manufacturer that produces and sells the “Koogo” logo pedal effect. Other sellers sell counterfeit products, and products and services cannot be guaranteed. Please identify clearly and be careful.
Holy War
3 Working Modes: Lo Boost/Boost Off/Hi Boost
Lo Boost: Boost a narrow band of high frequencies a little bit.
Boost Off: No boost is engaged.
Hi Boost: A higher amount of boost is engaged
Full metal shell
Very small and exquisite
True bypass
Koogo Heavy Metal Distortion Effect Pedal
Specifications:
Input impedance: 1M Ohms
Output impedance: 470 Ohms
Working current: 25 mA
Power Supply: 9V AC adapter
Dimensions: 3.7" (D)*1.8" (W)*2.1" (H)
Weight: 8.5oz (with box)
Package included:
1 x Holy War Pedal
1 x User's Manual
Note: The AC Adapter is not included
- Entirely gaining and boosting the distortion degree of metal. Koogo PDS-3 distortion pedal has special and strong distortion effect.
- 3 Working modes -- Lo Boost: Boost a narrow band of high frequencies a little bit.Boost Off : No boost is engaged. Hi Boost: A higher amount of boost is engaged..
- Full metal shell, stable and strong. Well built quality.
- True bypass provide transparent tone, LED indicator shows the working state
- "Koogo" is a professional manufacturer of guitar pedals. If you receive an unsatisfactory product, please contact us for a solution.
User questions & answers
| Question: | What is the latency specification of this set please |
| Answer: | Not sure what the exact numbe is, but I personally can't hear any latency at all when I use mine. |
| Question: | Can i attach one to sound board and other to speaker |
| Answer: | Sure you can . it will work |
| Question: | Why will this not work with a active guitar |
| Answer: | There may be a couple reasons: 1) In some rare cases, the guitar’s active electronics are wired with inverse polarity. In this scenario, the transmitter's electronics can go into a protection mode that keeps the system from being functional. 2) Because active pickups usually deliver a higher signal voltage range, you can notice a difference in the sound of the pickup depending on what devices you send the signal through before it goes into your amp. 3) It’s not the active electronics that causes the interference on the transmitter. It’s the transmitter that causes (poorly shielded) active electronics. A short cable which increases the distance of the transmitter will solve this problem in most cases. Hope this helps. |
| Question: | What is the signal latency specification of this set please |
| Answer: | The signal latency is about 6ms~12ms |
Aguilar AGRO Bass Distortion Effect Pedal
Aguilar
Product description
Update - New, smaller, case designs! Available NOW! Aguilar pedals have been made smaller by reducing the “lip” around the edges of the pedal. By reducing this lip, you can now use ANY right angle plugs regardless of barrel size! And with a flat surface on the bottom of the pedal, mounting to a pedal board is easier than before! The AGRO is based on the saturation channel of Aguilar’s celebrated AG 500 bass head. Capable of producing everything from warm, tube-like overdrive to full on distortion, this pedal will give you the grind you need without sucking out your low end. The AGRO offers a wealth of overdriven sounds within an easy to use, 4-knob layout. The Saturation control offers a tremendous range of distortion while the Contour control allows you to dial in a scooped or a more aggressive boosted midrange sound. The Presence knob adds the right amount of ‘attack’ ensuring that your bass remains defined even with the most saturated settings. The output level control guarantees that you’ll be able to get the distortion you want at any volume level.
- Separate Saturation and output level controls
- Contour control: broad spectrum mid scoop centered around 900Hz
- Presence control: + 6dB/-20dB >4kHz
- Power: Nine-volt battery or optional universal power supply
- Heavy Duty steel construction
Pro Co RAT2 Distortion Pedal
Proco
Product description
The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads. Do you have a powerful amp with too much headroom for the gig? The RAT 2 nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive. Maybe you already love your amp's distortion. Use the RAT 2 as a boost for solos and get the extra kick you need.For any further queries please contact Pro Co's Technical Assistance (800) 467-2726 x1206 / Customer Service (800) 467-2726 x1123 / Quality Assurance (800) 467-2726 x2306.
- Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads
- Nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive
- Use the RAT 2 as a boost for solos and get the extra kick you need
User questions & answers
| Question: | Can you use it as well as Bass Distortion Effect and how it sounds |
| Answer: | Dear Guitarists of JOYO fans or new buyers, as it is sold by JOYO technology directly in an original condition, the DC 9V power adapter and battery is not be included in the package, sorry for the inconvenience bring to all our buyers. we are new in retail, but we will accept buyers' suggestions, I think we may make update in further, thanks for supports on JOYO. Power Supply: 6F22 9V Battery or DC 9V power adapter (When connecting the adapter, battery power would be cut off automatically) |
| Question: | I'm looking for a distortion/overdrive that isn't so "fuzzy." Something with good gain but won't make my guitar sound muddy and out of tune. Help |
| Answer: | My BF got this today for Xmas. He just tried it and he had to have the IN and OUT cords plugged in and the amp turned on. If the amp is off, the light won't turn on. |
| Question: | Where is this product made |
| Answer: | Yes...But, of course an TS in front is ideal. |
| Question: | Can you run this at 18v? (Proco Rat |
| Answer: | Dear buyers or JOYO fans: it is sold by JOYO technology directly in an original condition, in package the DC 9V power adapter and the cable is not be included.sorry for the inconvenience bring to you. |
Tech 21 dUg Pinnick DP-3X Signature Bass Preamp Pedal Bundle w/Cables
tech21
Product description
A super-compact adaptation of his Tech 21 Ultra Bass 1000 Signature head, the DP-3X also recreates the sound dUg originally developed way back in the 80s, merging high-end distortion with low-end bass. Prior to his signature head, this involved running a guitar amp and a bass amp together, along with rack full of effects. Wanting to further streamline his gear for occasions when his full Tech 21 rig simply isnt practical, dUg collaborated on the all-analog DP-3X pedal. Personally beta-testing the DP-3X on a European tour, dUg encountered a different backline in each and every venue. But no matter which amp was on stage, dUg was able to nail his immense tone each and every night. In addition to achieving dUgs unique tone, the DP-3X has the flexibility to provide traditional bass amp sounds as well. Mix mode engages Drive to bring in distortion and Chunk for upper harmonics. A Gain button provides additional distortion and compression. In clean/full-range mode, Drive and Chunk disengage, while Comp and Gain remain active. Other controls include 3-band active EQ with switchable Mid and a master Volume. Features include chromatic tuner, headphone capability, and an XLR Output to go direct to the PA desk or studio board without compromising detail, warmth or responsiveness.
- Chromatic tuner
- Controls include 3-band active EQ with switchable Mid and a master Volume
- Headphone capability
- XLR output
JOYO JF-17 Extreme Metal Pedal Effect Distortion Pedal with 3-Band EQ and Low & High-gain Pedal for Electric Guitar Bypass
JOYO
- The JOYO Advantages: over 14 years of brand history, strong technical teams, many innovative patents, electroacoustic core technology, guide design of music masters, winning the love of global fans, inspiring people's music dreams.
- Extreme metal distortion provides a strong low frequency and clear transparent high frequency, plays the rhythms and leads that cut through the mix.
- With a powerfully adjustable 3 band EQ and sweep Mid-freq knob. BOOST, LEVEL, DRIVE, HIGH, MID, LOW, six flexible knobs for free tuning.
- Metal aluminum alloy case, high quality precision components.
- What You Get: JOYO JF-17 distortion pedal, detailed operating instructions and excellent customer service.
User questions & answers
| Question: | How do I get a hold of the seller |
| Answer: | Mine was full filled by amazon |
| Question: | Is it like crispy crunch metal tone |
| Answer: | Hi, Yes, it is, Maximum gain pedal delivers from the crunch of AC/DC TO metal sound TO HEAVY METAL of Metallica. |
| Question: | Funciona para guitarra acustica |
| Answer: | YES |
| Question: | I notice no difference when it’s on or off. Second brand that I’ve had this issue with. Help please |
| Answer: | Turn your gain and levels up a little past halfway or more step the button on the right so that your red light comes on. Should have nice crunchy sound. If you don't have an ac adapter for it make sure to put in a 9volt battery until you can get one. Let me know if this works out for you. |
Product features
JOYO JF-17 Extreme Metal
JF-07 with a powerfully-adjustable 3 band EQ and sweep Mid-Freq Knob,Extreme Metal provides a strong low frequency and clear,transparent high frequency.Play the rhythms and leads that cut through the mix!
Wonderful at different moments
This is an effect device that can adjust the high and middle bass. You can adjust it to the frequency you want. The gain is set at about 9 o'clock. You can get some excellent classic rock sound benefits. At 12 o'clock or higher, you will get some beautiful Hard rock tune, at 3 o'clock, you will get a full metal impact, and enjoy the best timbre at every moment
MXR M80 Bass D.I.+ Bass Guitar Preamp Distortion Pedal with Footswitchable Distortion Channel, Noise Gate and XLR Direct Out with 2 Path Cable and 2 Instrument Cable
JIM DUNLOP
Product description
MXR M80 Bass D.I.+ Bass Guitar Preamp Distortion Pedal with Footswitchable Distortion Channel, Noise Gate and XLR Direct Out with 2 Path Cable and 2 Instrument Cable
The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, an a noise gate trigger control to eliminate hum and hiss.Finally, all the essentials in one tough little box. You need a serious D.I. for playing live and laying down killer tracks. You've got to have a preamp and finely tuned EQ to add punch to your tones. And you definitely can't do without some rich, custom distortion.This one-of-a-kind pedal gives you the whole deal in a bomb-proof enclosure that will survive even the most out of control gigs-and players. Built with the highest quality components, the M-80 can give you eve everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual.Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will.The adjustable noise gate pours on the sustain and cuts out hum and hiss. With XLR and parallel 1/4 outputs and a phantom power switch, you'll never have a problem delivering your choice new tones.Be prepared for any gig with the MXR M80 Bass D.I.+ preamp pedal. From wedding gigs to rock shows to studio sessions you'll be ready to lay down the low end. Dedicated clean and distortion channels give you tone-shaping flexibility and classic sounds. Multiple outputs make the M80 Bass D.I.+ perfect for multi-amp setups, running to the PA or for studio sessions. guitar pedal guitar pedals pedal guitar pedal for guitar guitar multi effects unit upc 710137019751 and ASIN is B0002E52JI Bundle Includes 2 Path Cable and 2 Instrument Cable Add an all-in-one bass preamp and distortion to your gig bag.
- A built-in noise gate keep the M80 silent between notes. Whether you are using it as a distortion pedal or as a full-blown preamp/DI, the MXR M80 Bass D.I.+ has the killer sounds you want from your bass
- the MXR M80 Bass D.I.+ preamp pedal. From wedding gigs to rock shows to studio sessions you'll be ready to lay down the low end. Dedicated clean and distortion channels give you tone-shaping flexibility and classic sounds
- Multiple outputs make the M80 Bass D.I.+ perfect for multi-amp setups, running to the PA, or for studio sessions. A built-in noise gate keep the M80 silent between notes.
- Whether you are using it as a distortion pedal or as a full-blown preamp/DI, the MXR M80 Bass D.I.+ has the killer sounds you want from your bass
- An XLR direct out is perfect for recording sessions and live shows. Powering the MXR Bass D.I.+ is super easy. You can use a 9v battery, an optional adapter, or phantom power right from a mixer. The Bass D.I.+ will make sure you're ready for any gig. guitar pedal guitar pedals pedal guitar pedal for guitar guitar multi effects unit
User questions & answers
| Question: | does this come with AC power adapter |
| Answer: | Sorry but MXR does not include a power supply. Thanks for your interest! |
| Question: | Can you purchase a power supply for this product |
| Answer: | You can use the typical pedal power supplies or you can use a 9v battery. I have used a battery before and it works fine. I now use a BoxKing power bank. MXR also makes a very popular power supply. |
Tech 21 DUg Pinnick Signature Bass Distortion Pedal
tech21
Product description
Prior to his signature head, dUg was running a guitar amp and a bass amp together, along with rack full of effects. Wanting to further streamline his gear for occasions when his full Tech 21 rig simply isn't practical, dUg collaborated on the all-analog DP-3X pedal. Personally beta-testing the DP-3X on a European tour, dUg encountered a different backline in each and every venue. But no matter which amp was on stage, dUg was able to nail his immense tone each and every night.In addition to achieving dUg's unique tone, the DP-3X has the flexibility to provide traditional bass amp sounds as well. Mix mode engages Drive to bring in distortion and Chunk for upper harmonics. A Gain button provides additional distortion and compression. In clean/full-range mode, Drive and Chunk disengage, while Comp and Gain remain active. Other controls include 3-band active EQ with switchable Mid and a master Volume. Features include chromatic tuner, headphone capability, and an XLR Output to go direct to the PA desk or studio board without compromising detail, warmth or responsiveness. Rugged all-metal housing measures 7.75 l x 2.5 w x 1.25 h and weighs just 12 oz
- Bass Disttion Pedal with Compression
- Headphone Output
- XLR DI Output
- 3-b EQ
- Tuner
User questions & answers
| Question: | Does this come with a power supply |
| Answer: | Yes it comes with a power supply. Awesome bass pedal, I use it exclusively |
| Question: | Power supply specs |
| Answer: | Input- 100-240...50/60Hz...250mA Output- (v...300mA |
Behringer Bass Overdrive BOD400 Authentic Tube-Sound Overdrive Effects Pedal,Purple
Behringer
Product description
Get rich, tube-like distortion, smooth sustain and super-fat tone! Here's an overdrive pedal that supports the entire frequency range of bass guitars, even 5 & 6-stringers. The best part of all, the BASS OVERDRIVE BOD400 was designed specifically for bass, so the bottom-end won't drop out when you pull the trigger.
 Designed specifically for bass, so the bottom-end won't drop out when you pull the trigger. |
 Plenty of sculpting options. |
Add Some Grind to Your Sound
One of BOD400's coolest features is its BALANCE control, which lets you mix the overdriven signal with your natural bass sound for superb clarity, punch and extraordinary character. That way you can add the perfect amount of tube-like tone, without sacrificing all of your precious low-frequency content.
Versatility
BOD400's overdriven tones range from a slight grind to the syrupy--thick sound of a tube stack just before meltdown. You also get exceptional tone sculpting, thanks to an onboard 2-band EQ, so you won't have to worry about your low "B" getting lost in the mix.
Powering Options
You can power this pedal with a 12 V DC Power adapter (not included) or a 9V battery.
What's in the Box
Behringer BOD400 Pedal, User's Manual
- Get tube-like distortion, smooth sustain and super-fat tone
- This BEHRINGER product has been designed to compete head to head with leading products on the market
- Unique Balance control to blend between overdriven and dry bass sound for maximum punch
- Dedicated Level, 2-band EQ and Gain controls for awesome sound shaping
- Status LED for effect on/off and battery check
User questions & answers
| Question: | Does it come with any cables, anything? if not what type and how many would I need |
| Answer: | Nope. No cables. Just one pedal in the box.You will need at least 2 cables. 1 to connect your guitar to pedal, and one to connect pedal to amplifier. And do not forget about battery (6F22) or some adapter |
| Question: | Does it come with a wall power supply |
| Answer: | No it doesnt. But if your looking for Bass overdrive, consider somethign else. I bought it and returned it. THE best bass OD is the Yellow box OD by boss. |
| Question: | Does it have true bypass |
| Answer: | No, but it doesn't color the tone when it's off. |
| Question: | Will this also work with a regular six string guitar |
| Answer: | Absolutely, I use it with by strat all the time. It gives it a 'fatter' distortion sound than most guitar pedals, but I love it. It also has low and hi adjustments for gain, so you can tweak the sound to be less low end for your 6 string. Great pedal. |
Latest Reviews
View all
Composite Kitchen Sink
- Updated: 15.07.2023
- Read reviews
Kosher Hot Dogs
- Updated: 11.06.2023
- Read reviews
Vape Battery For Pods
- Updated: 31.03.2023
- Read reviews
Doskocil Dog Crates
- Updated: 13.02.2023
- Read reviews
Automatic Bread Maker
- Updated: 23.02.2023
- Read reviews