14 best nux pa systems

User questions & answers

Question:	What's the batter life? 3 hours
Answer:	Yes, it is actually a charger for a specific equipment.
Question:	Is it possible to by additional receivers/Use multiple receivers for one mic
Answer:	The bottom is a bit larger than the top on the outside only. The inside is straight and the metal strainer works well. That said, this keeps coffee hot for a long time. It is well made.Please note that this pot is only about 3 1/2 "real" cups of coffee (think glass 12 oz mug if you are in the US for example). If you are looking to get 4 real cups of coffee (or close to 48 oz of coffee) you should look at a little larger pot. We use the 12 cup Bodum glass french press pot to brew and then this pot to keep the remaining cups for a while.
Question:	When the rechargeable battery eventually fails (no longer holds a charge) are the batteries (user) replaceable? And if so...Where can it be purchased
Answer:	Interesting as no where on the actual press nor the box does it state where the unit is manufactured - no where
Question:	Is this available with male 1/4 trs
Answer:	Not certain, but this looks pretty much like an exact copy of the Secura French press which is supposedly made in China. Seems to me that this press likely is made in china and re-branded by different companies.

Product features

It's Compact

A solidly 2.4G Hz wireless snap-on microphone system designed for those who want to get rid of the cables and enjoy the wireless world without any complicated set up.

A rechargeable battery powered system that quickly and easily connects to the mic and input xlr jacks. No wires at all and no costly batteries required as it is fully USB rechargeable.

It's Convenient

3 steps and less than 30s, it will be ready to go:

Step 1. Turn on the transmitter and the receiver. 5 seconds

Step 2. Snap on the transmitter to your Microphone and the receiver to your amplifier, mixer, or recorder. 5 seconds

Step 3. Pairing up and sound check. 20 seconds.

Channel 1 is the default paring channel if you want to use different channels for any reason, just press the channel switch on both the transmitter and the receiver to make sure both units are in the same channel. Wait till you see the RF Status LED turns blue.

It’s Constructive for videographers and live streamers

B-3 comes with a hot shoe mic adapter and female XLR to 3.5mm phone jack cable which easily attaches to your camera for wireless recording.

For videographers & live streamer

For vocalists

For Buskers

• Works like a guitar cable, but it offers you freedom of playing guitar in the easiest way.
• 2.4G Hz range, far from any radio or TV interference, and it is more than capable of safely handling your audio signal wirelessly.
• Designed for Passive Pickup Guitar,such as Electric Guitar.32-bit digital wireless sound quality and 48 kHz frequency response, so you’ll hear your guitar tone in all of its detailed glory
• With a wide dynamic range of more than 110 dB, you’ll hear the full frequency range of your guitar or bass
• 15 meter (50 feet) operation range (Up to 30 meters in open air), < 5 ms latency, no lag or signal loss

User questions & answers

Question:	Does it include a charger
Answer:	It usually lasts 6 hours. It does vary on actual usage. Easily finish a 4-5 hour event. Works to also wirelessly transfer sound between speakers!
Question:	It works for zosam portable bluetooth speaker, hifi 10w rich bass hd stereo sound wireless speaker, ipx
Answer:	no, it only for one receiver.
Question:	Will this also work on a mandolin with a passuve pickup system
Answer:	I believe the seller / Warranty provider if so, to be contacted.
Question:	So ..this wasn't designed for use with active pickups, like the emg 81 or fishman fluence.. but what issues might manifest if using those
Answer:	No

Product features

Guitar Friendly, Designed for Passive Guitar

Guitar-friendly, Designed for Passive Guitar,Smart-Design Transmitter, means its jack has a swivel adjustment allowing you to duck the unit out of your playing field. Just plug in the 1/4'' transmitter, and pair with the Receiver.

The B-2 Transmitter works with all guitar types. It was designed to be compatible with the most popular guitars.

User-Friendly Freedom

NUX B-2 works like a guitar cable but offers wireless freedom. Setting up the system is simple: choose your channel on the Transmitter and Receiver, and B-2 is ready to go.

Product description

Make any mic into a wireless mic with the Nux 2.4GHz Wireless Microphone System. 32-bit / 48KHz Hi-Resolution Sound Quality 6 Built-in switchable Channels of 2.4 GHz Bluetooth Super Low Latency: < 4ms, Dynamic Range 108 db, THD + Noise < 0.02% (1KHz@-10dbFS) Range > 100 feet line-0-site Outdoors, Battery Life: 5 Hours per Full Charged 5 Years Warranty from NUX Brand of Cherub Technology base on high technology & mass manufacturing quality controlled

• 32-bit / 48KHz Hi-Resolution Sound Quality, Cable Adapter for camera, cellphone available
• 6 Built-in switchable Channels of 2.4 GHz Bluetooth
• Super Low Latency: < 4ms, Dynamic Range 108 db, THD + Noise < 0.02% (1KHz@-10dbFS)
• Range > 100 feet line-0-site Outdoors, Battery Life: 5 Hours per Full Charged
• 5 Years Warranty from NUX Brand of Cherub Technology base on high technology & mass manufacturing quality controlled

User questions & answers

Question:	Has anyone used this for speaker output? From Mixer out to active speaker
Answer:	It does not have the charger. Just the USB cable split to a Y to charge both the transmitter and receiver simultaneously.
Question:	Will it work with a Shure SM61 omnidirectional handheld mic with xlr plug
Answer:	No, I'm sorry different code and decode system.
Question:	With a mic like a Shure 58, will the mic easily slide in and out of a standard round clip while this transmitter is attached
Answer:	Dear buyer, thank you for your question. This also can work on a mandolin with a passuve pickup system.This Wireless Guitar System is equivalent to a transmission connection line.
Question:	Does it have autoscan for channels? Worried that mid show interference could be an issue
Answer:	The issue with active pickups only comes out at EXTREMELY high volumes, it not so bad honestly. it's just a endless "beep" similar to amp hum coming out of speakers. while you're playing though, you wont notice it at all. I can't site the exact science behind it, but it's due to the radio signal frequency being able to pick up the live circuitry of the active pickups. It is very real, and i recommend you look google it if you don't believe. but like i said, it's really not that bad, and requires your amp to be at VERY high volumes. I use 2 MESA's (dual and triple rec's) that I crank to anywhere between zero and just under half for live and practice purposes, yet the "beep" still isn't very detrimental. Tested with Duncan Blackouts and EMG (81/60s..? i can't remember the exact ones).

• Mighty Plug is a handy silent-play gear for Guitar and Bass.
• 13 Amplifier Models,19 Variety of Effects. Adjust the setting by Mobile APP.
• Rechargeable Li Battery,3 hours playing time.
• Bluetooth Mode(only as receiver),Mobile APP. you have to use Mobile APP to control it.
• Built-in audio streaming function, so you can connect the Amplug directly to your computer with a Micro B USB cable.

User questions & answers

Question:	What happens when you play a Bass thru the guitar effects
Answer:	It would work, but I dont reccomend using it in this way, especially if you have more than one wireless mics in use and if you need this to reach a large crowd. It's great for post production activities, but I've had issues trying to use it for live events.
Question:	Can this work on a spark amplifier
Answer:	Yes, it does.
Question:	Can you connect your phone wirelessly for jamming
Answer:	Good question. Yes, a mic attached B-3 transmitter will easily slide in and out of a standard round clip. The diameter of B-3 close mic cable.
Question:	Can you connect to a Bluetooth speaker via wireless Bluetooth
Answer:	No. You have to change channel by your hand.

Product features

For Electric Guitar and Bass

Mighty Plug is a handy silent-play gear for both guitarists and bassists, featuring various effects, modeling amplifiers, and Impulse Response (IR) cabinet models. With built-in acoustic guitar IR models and acoustic amps, you can play regular electric guitar to simulate acoustic guitar. The embedded Drum patterns can let you play along with your favorite music styles.

Guitar Mode,Bass Mode

Guitar Mode: There are 3 channels and an Acoustic Guitar simulator for electric guitars.

Bass Mode: There are 3 channels for bass guitar. 6 effect modules and 25 variety effects in total.

Bluetooth Mode

You can choose the Bluetooth connection AUDIO mode to play along with your favorite music only. Or APP mode to control the effects and customize your presets, and store it. You can also playback any music when APP mode is selected. The audio mode option is useful when you connect any Bluetooth device that you can not install the Mighty Amp application.

Get Recorded

You can record your instrument without using any audio interface. Mighty Plug has a built-in audio streaming function, so you can connect the Amplug directly to your computer with a Micro B USB cable, and it is ready to play and record. A driver free* solution that helps you to produce music with direct connection. You can use the headphones output for monitoring, you will hear both your guitar and the audio from your computer.

• OFFERS POWERFUL SOUNDS IN COMPACT SIZE - The NUX Mighty Lite BT is a 3W desktop amplifier that can be used in any room at your home. It's lightweight and small enough to be put on a desk.
• PROVIDES 3 USEFUL CHANNELS - The portable amp features Clean, Overdrive, and Distortion Channels suited for single-coil or humbucker pickup guitars.
• IMPROVE YOUR SKILL - The 9 onboard drum beats and metronome hones your jamming skill. Sync the Mighty Lite BT amp with the mobile app and play various Pop, Metal, Rock, RNB, Blues, Country, Ballad, Funk, or Latin drumming styles.
• ENHANCES YOUR SOUND - Download the Mighty Lite BT mobile app to unlock the amp's digital effects and use them to add ambiance to your mixing track. The built-in Reverb and Delay effects help amplify the impact of your sound.
• GET MORE FROM THE MOBILE APP - The Mighty Lite BT Mini Amplifier utilizes Bluetooth 4.2 Technology so you can pair it with your phone. Open the Mighty Lite BT mobile app and tweak the onboard effects even if you're 10m away.

User questions & answers

Question:	About how long will it take to get back in stock? Every amp i try to get it says will ship once it comes in stock. Could this be because im having it
Answer:	there are Guitar Mode and Bass Mode in Mighty Plug. you can choose Bass Mode when you play Bass.
Question:	Can this be plugged into an audio interface? and used to record guitar tracks
Answer:	no, Mighty Plug works with the headphone. If you plug it into the amplifier,you have to use the headphone. AUX-in is ok.
Question:	Hi, can you use a bluetooth microphone with the Nux
Answer:	Yes, your phone connects to the Nux via Bluetooth. That's the only way that it works in fact (as far as I know). So you play jamming tracks on your phone and then you hear them and your guitar through the earphones connected to your Nux.
Question:	Mighty light for ios only works for ios
Answer:	The bluetooth for Mighty Plug is bluetooth receiver,you can not use it to connect your bluetooth speaker. But if you have a amplifier without bluetooth, you can connect mighty plug to your amplifier, your amplifier will be bluetooth amplifier.

Product features

Portable, Bluetooth Desktop Guitar Amplifier

NUX Mighty Lite BT is a new standard for the mini class amplifiers. It’s lightweight and literally small all-in-one portable guitar amplifier. It's a low-watt practice amp that you can use in any room at your home, put on a desk or take it wherever you want and jam, via the battery-powered operation or USB to power bank connection.

3 Channels: Clean, Overdrive, Distortion

It has good sounding and clean overdrive and distortion channels.

With a single coil or humbucker pickup guitar, you can dial up to create any music style sound, such as pop, rock, blues, and metal and more.

Reverb, Delay, Drum Beats, Tap Tempo

Enhance your sound with digital effects; NUX Mighty Lite BT has filters and digital effects.

You can easily reach the Delay and Reverb effect controls by amp's interface. And there is more to unlock via Mighty Lite BT mobile APP.

Your sound is ready to rock now!

———————————————

You can pick a drum beat and play the way you like and feel.

There are 9 drum beats in different drumming styles: Pop, Metal, Blues, Country, Rock, Ballad, Funk, RNB and Latin. And a metronome for your skill improvement.

You can use TAP TEMPO to set delay time and drumming speed.

You can switch Delay Speed or Drum Tempo by pressing and holding the TAP TEMPO button for 1.5 seconds.

AUX-IN, Bluetooth, Headphone

NUX Mighty Lite BT is an ultra-low watt multimedia desktop amplifier. You can connect any music player via 3.5mm AUX-IN or Bluetooth connection. Play along with backing tracks and get the wings on and rock in your bedroom! Or, don't make the baby cry, use your headphones.

NUX Mighty Lite Mobile Application

Now the Mighty Lite APP is available for Android and iOS.

You can download the install file for Android devices from the support page. And it's available on Apple Store for the Apple devices.

• 3 Delay Effects - 70’s Analog, 60’s Tape and 80’s Digital.3 Reverb Effects - Spring, Plate and Hall
• update the firmware before you play it from the official website
• Inside routing-control between the effects so you can choose which effect comes first.
• 6.35 mm stereo input and 2 outputs for the ultimate delay and reverb experience.By plugging a TRS cable into the pedal's input, you can add the Atlantic to any effect chain via Send/Return connection by using a “Y” cable or “Insert” cable.
• It has an Input Level toggle switch, +4 dB / -10 dB (high impedance / low impedance)

User questions & answers

Question:	With the delay level knob dimed, is it ~50/50 wet/dry or can you get a wet only sound
Answer:	It all depends on the manufacturer.
Question:	Can I play my bass through it with all the same effects as if it were a guitar
Answer:	Yes, use the headphones out to the audio interface.
Question:	Will this work with a OneSpot power supply
Answer:	If your microphone has a Bluetooth receiver that plugs into the 1/4 inch input jack (a regular wireless mic that you could plug in anywhere), and that's what your microphone connects to, then yeah, you could.
Question:	Mine won't work. it turns on and the leds light up the way they should, but i can't get any signal to go through (bypass or effect
Answer:	yes,Mighty lite for ios shoulb be ios 9 and above.

Product features

Delay effects

70’s (40ms - 400ms): Retro-delay meets modern technology, without losing the realistic BBD-effected repeats, so essential for capturing the 70’s retro feel.

60’s (55ms - 550ms): A warm & dusty tape-echo machine effect, packed with an array of analog-only goodies. Saturated colors that turn any sound into vintage. Tweak the Repeat knob to the max and use the Time knob to get an experience, just like the real Tape-Echo Machine.

80’s (80ms - 800ms): A digital era invention, crystal clear repeats. Digitally-copied clean repeats carry your signal without absolutely zero color particles. This is the best option if you don’t want to mix your favorite chorus with another colorization effect--or your favorite modulation effect.

SMART TAP TEMPO: Instantly synch-up your delays with the tempo you want to accompany. Simply tap the tempo with your foot. TAP TEMPO Speed range is 125 ms - 1500 ms for all delay types.

SMART TAP TEMPO

Instantly synch-up your delays with the tempo you want to accompany. Simply tap the tempo with your foot. TAP TEMPO Speed range is 125 ms - 1500 ms for all delay types.

Reverb effects

The Atlantic has 3 types of reverb effects and each type has a secondary effect. When any of the reverb effect is ON, hold down the reverb footswitch to activate the secondary effect.

Spring Reverb & Freeze: Creates a polyphonic atmosphere filter that catches the sound reflections from deep down spring reverb tank. You can adjust the tank size with the level knob and set the reflection distance with the decay knob. When the effect is ON, holding down the reverb switch delivers the infinite sustain as long as you hold the footswitch.

Plate Reverb & Shimmer: Straight and clean reflections inside a flat-walled room. You can control the room-size with the Level knob and then tweak the Delay bounce point with the Decay knob.

If you hold down the Reverb switch, straight reflections will be heated and swirled throughout the inside of the room creating a Shimmer effect.

Hall Reverb & Freeze: The sound of a well-designed hall. Whether the hall size is big or small, the reflections will be emitted by wall furniture. You can adjust the interior hall-size, from a small garage to a huge structure with the Level knob and increase or decrease the number of objects on the walls with the Decay knob. Less decay means more objects and faster reflection fading.

Inside Routing

Atlantic Delay & Reverb pedal also has inside routing-control between the effects so you can choose which effect comes first. On Serial Mode, you can create a deep-reflection reverb with wet or dry repeats, or you can split your guitar signal, and add both effects in the parallel chain. Each effect will be mixed with separated dry signals.

Input/Outputs

It has a 6.35 mm stereo input and 2 outputs for the ultimate delay and reverb experience.

By plugging a TRS cable into the pedal's input, you can add the Atlantic to any effect chain via Send/Return connection by using a “Y” cable or “Insert” cable.

It has an Input Level toggle switch, so you can optimize the input signal with your signal level. It adjusts the input impedance, if the input signal is too loud, switch to +4 dB to increase the headroom.

• With 2pcs Batteries
• Classic British Distortion,AUX in Jack makes it easy to practice along with your audio player
• Plug your headphone to practice
• Adjust the gain and tone level for different tastes
• Plug it in your guitar and enjoy the classic British rock sound now

User questions & answers

Question:	Can you use a mic in Aux port to hear your voice and guitar
Answer:	You adjust the level of the effects to the dry signal.
Question:	There a small clip-able speaker to pair this up with? (seemed it had a little onboard one ack
Answer:	I would say the echo side would work great for bass, but I question how the reverb side would sound like for bass
Question:	Does this work with passive pick-ups
Answer:	It should work just fine.
Question:	Can you plug into guitar and phone at the same time so you can hear yourself play AND music from your device to follow along to
Answer:	I have the same problem and I don't see any instruction in the manual as to how to "reset" it. Did anyone solve this? Check all cables in correct input/output jack, power seems fine (both sides light up), but only output is low hum.

Product features

AUX in and Headphone Jack

AUX in Jack makes it easy to practice along with your audio player.

2 AAA batterie inside

2pcs AAA batteries provide 40+ hours continuous play time (Alkaline batteries)

Classic British Distortion

Plug your headphones and enjoy your GP-1 with a British Rock distortion. Also you can adjust the gain and tone level for different tastes.

• Made by Anodized Aluminum Material. You can put your power supply between the layers.
• with Cable Organizers,Easy to organize all the cables.
• Hand Carry Bag Solution for the Travelling Musicians.
• You can put your own power supply between the layers.

User questions & answers

Question:	Which size board would fit strymon pedals better
Answer:	I thought this was a great idea so I just checked. After using two different brands of headphone/ microphone I was not able to produce audio in the way that you are asking about. I do not have a 3.5mm mic outside of the phone headphone type so maybe that would work. One solution would be to port in audio from the line out of a laptop/ pc sand have the mic hooked up to the computer.
Question:	Would this fit a Whammy, Wah, and big muff? It looks too narrow
Answer:	Connect it with the headphone.
Question:	Does anyone know of a durable hard case for this board with pedals attached
Answer:	yes,it works with passvie pick-up.
Question:	Will a voodoo lab pedal power 2 plus fit in between the layers
Answer:	Yes you can, That is exactly what it was designed for. 1/4" plug to guitar, 3.5mm aux input, and 3.5mm headphone jack. Works like a charm.

Product features

Create Your Own Pedal Board

NUX NPB-M Guitar Pedal Board offers you the optimum board space. Allowing you to customize your very own pedal board in the most efficient way. You can assemble the platforms in order the way you like.

Solid, Durable and Light-Weight

made by anodized aluminum material; which is "solid as a rock, light as a pillow". The bottom of the platforms are carved and well-supported, and gives you some space to cover your cables without losing any strength. And the side parts are strongly holds all the parts together, it can absorb the shock when you hit your pedal footswitch.

Cable Organizers

There are cable organizers in the box. You can attach to below any platform and it can hold the cables. Easy to organize all the cables and it helps you to save your time when you want to replace or re-organize your pedals.

2 Ways to organize the cables

There are 2 ways to use the cable organizers; you can use the clips and attach the cables, and you can use it as a holder and cables can cross inside the organizers.

with a Light-Weight Carrying Bag

the Bag is made by Water Repellent Material

Fit in a 22-inch Luggage

the bag is allowed to take as a hand carry bag during the flight. But please keep in mind that, airline companies may ask you to give your hand carry bag to the cargo unit if there is not enough space in the plane.

Accessories inside

Bag Strap,Cable Organizers,Dual Look Hook

Product description

Specifications:

Power Supply: Two AAA batteries (Alkaline batteries are recommended)

Battery life: approx. 40 hours (Alkaline batteries)

approx. 8 hours (Carbon batteries)

Dimensions: 100 (L) x 88 (W) x 23 (H) mm

Weight: 43g (not including batteries)



Package included:

1 x NUX GP-1 Guitar Plug Headphone

1 x Two AAA batteries

1 x User’s manual

• Classic British Distortion
• AUX In Jack makes it easy to practice along with your audio player
• Includes 2 AAA batteries which provide more than 40 hours continuous play time
• Portable size, easy to use
• Plug it in your guitar and enjoy the classic British rock sound now

User questions & answers

Question:	Can I plug it into my Strat
Answer:	NPB-L is larger, it is better for strymon pedals
Question:	does it come with drum programs like the vox
Answer:	No room for Whammy or Wah...I put the Big Muff on the top level...wont fit on the lower. :)
Question:	Does ot works with an electric bass
Answer:	I fit it in the softcase that comes provided with all the pedals on, so any hard case the same size should work
Question:	Is there an output to amplifier aside from and at the same time headphone output
Answer:	Yes, you can.

Product description

Features: 1) Up to 6 hours recording time. 2) Mono or stereo recording (stereo input only via aux-in jack). 3) 99 user memories. 4) 40 built-in drum patterns with tap tempo. 5) Change the playback tempo of your recorded phrases without changing the key. 6) The recorded phrases can be input into and backup in your pc. 7) Aluminum alloy housing, good durability. 8) Durable jacks and foot switch. 9) Powered by 9V batteries or AC adapter.

• Record and overdub as many layers as you need;up to 6 hours recording time;mono or stereo recording
• 99 user memories;built-in drum patterns with tap tempo
• Change the playback tempo of your recorded phrases without changing the key
• Switching phrases without latency;Extensional pedal (optional) for more control
• Import and backup phrases with pc;runs on batteries and ac adaptor

User questions & answers

Question:	Does the aux in save to stereo? I have a jam man solo xt with aux in and it converts to mono
Answer:	Yes you can, but you need to mic the guitar first in order to input sound into the pedal, otherwise the pedal will not record as it does not have an embedded mic.
Question:	Can the nux loop core unit use Nimh recahargable batteries, can it work with a Mac, does it use wave files
Answer:	absolutely. You probably figured this out already, but for anyone with the same question, put your multi pedal first if you want the effects to be loopable, and run the cable off the Nux into the input of the amp. If you have an effect loop amp you are in luck, because you can run your multipedal into the front of the amp and the looper in the effect loop. This way you can turn off all your effects, or only turn on certain ones, play a loop that way and keep it clean or only affected by what you want, then change the settings on the amp or whatever, and play over the top of the still unchanged loop with the new settings. You can only do this if you use the ME20 for all your effects. If you try to run effects etc on both the amp and the pedal, when you change your amp settings you affect everything. Run your amp on a clean setting for stuff like this. If you run everything into the front of the amp (no effect loop amp, for example) you have a problem then with your loops changing every time you change settings on the amp unless you keep the amp clean always, OR only use amp effects and no use the multi pedal for that song/songs. Its a bit mind boggling at first. It took me a while to get my head around it all with cables and pedals and what signal goes where in the amp (or not). My suggestion is that if you have an amp with effects, use those first and not a multi pedal or effect pedals. If you have pedals, run the amp clean and use the pedals. Its only when you try to combine the two that it starts to get confusing! Then, ye old trial and error is your friend.
Question:	can you use with a non electric acoustical guitar
Answer:	Probably no. It does not have a MIDI interface, which would be useful when recording.
Question:	I have a boss me - 20 pedal, could you connect each other? i mean, could you connect the nux looper with others brands? thank you
Answer:	Yes it does come with an ac adapter!

Product features

Nux Loop Core Pedal

Loop Core allows you to record and create music phases and play back as loops.

Whether you practice, compose or play live gigs, you will inspired by the well-considered functions.

Solo Artist and producer

Build-in Drum machine with 40 patterns drives you play with the gear, The drum rhythm's are really helpful to strum along with, Operation is simple- adding and deleting layers was easy to learn and being able to save loops.

Compact size but powerful

Maximum 6 hours recording time and unlimited layers of overdubs, provide you powerful energy to compose your own music.

Save your recordings to Computer.

You can even connect a microphone to the ‘Aux in’ and record yourself singing along with your strumming and drums. Save your recordings to one of the 99 empty slots or save it to your computer by USB port.

Product description

GP1 is a portable guitar plug amplifier with distortion sound. You can play your electric guitar anytime, anywhere. Plug your headphones and enjoy your GP1 with a British Rock distortion. Also you can adjust the gain and tone level for different tastes.

Features:

Compact and light-weight design, easy to carry.

Built-in distortion effect.

Designed with 3 adjuster: Level, tone, gain.

0.25in plug, just plug into guitar jack, no need of installation.

Powered by two AAA 1.5 alkaline batteries (not included).

Specifications:

Color: Black

Power: Two AAA 1.5 alkaline batteries (not included)

Product size: 9.7 * 8.4 * 2.1cm / 3.8 * 3.3 * 0.8in

Product weight: 44g / 1.5oz

Package size: 16 * 13 * 2.8cm / 6.3 * 5.1 * 1.1

Package weight: 77g / 2.7oz

Product Included:

1 * Guitar Plug Headphone Amp

1 * User Manual (English & Chinese)

Package list:1*NUX GP-1

• Compact and light-weight design, easy to carry
• Built-in distortion effect.
• Designed with 3 adjuster: Level, tone, gain.
• 0.25in plug, just plug into guitar jack, no need of installation.
• Powered by two AAA 1.5 alkaline batteries (not included).

• Wireless Stereo Modelling Amplifier with Bluetooth, Mobile App.Bluetooth connectivity and a dedicated app will enhance your tone from your mobile devices.
• Build-in Wireless Receiver , Wireless Transmitter with the package.
• 2 x 2 inch speakers with a passive bass radiator, 4 + 4 watt power.
• Rechargeable Internal Battery,up to 18 hours playing time.
• Build-in 13 Amps + 20 IRs + 19 Effects. Guitar,Bass,Acoustic Guitar Emulation IR

User questions & answers

Question:	Wireless pairing does not work. Following instructions. Please advise
Answer:	Works great on my Strat! You can even plug it into a small speaker instead of headphones and have a small amp for practice.Daniel
Question:	Are the batteries serviceable or user replaceable
Answer:	No, it doesn't. It does have an aux in so if you have backing tracks on another device you can play those through it.
Question:	The picture says 750 millisecond response time, which seems like a huge delay. Is it really that long between strum & sound
Answer:	It should work just fine. The Guitar plug is a bit heavy on the high end, but you should be able to get some good tones from a bass. You can also plug your bass into another pedal before hooking this into that pedals output to give yourself even more options.
Question:	How is the latency? I added a transmitter to a pocket amp & used Bluetooth 5.0 to connect to a speaker & found noticeable lag- would this be better
Answer:	No I'm sorry, but it wont work that way. You could use a "Y" cable out of your guitar, to feed both your amp and the NUX, but you might suffer some level decrease due to the impedance mismatch. I wouldn't "Y" the headphone output. If you do, the level would likely overdrive your amp's input stage. This is really designed to use in your hotel room where an amp would disturb the neighbors! LOL

Product features

Mighty Air Wireless Guitars Amplifier

NUX Mighty Air is a wireless stereo modelling guitar / bass amplifier with Bluetooth connectivity and a dedicated app

to enhance your tone from your mobile devices.

It can serve you for bedroom practice, pre-show warming up, travel entertainment and more.

1 Amplifier, 2 Modes, 7 Channels

Guitar Mode, Bass Mode

GUITAR CHANNELS: CLEAN - OVERDRIVE - DISTORTION - ACOUSTIC GUITAR SIMULATOR

BASS CHANNELS: POP - ROCK - FUNK

13 Amps + 20 IRs + 19 Effects

Stereo-wide sound field with tight low-end response

Equipped with a unique speaker system, 2.2-inch custom speakers with a passive bass radiator, Mighty Air can work perfectly with both electric guitar and bass.

Quick-Play Wireless Versatility

Mighty Air comes with the NUX wireless transmitter, and sets the new standard for practice amplifiers with its complete wireless* versatility.

The included transmitter and onboard receiver wireless system can work well with any guitar/bass, active pickups or passive pickups.

Product description

About this NUX MG20 Guitar Modeling Multi FX Pedal



MG20 is the floor guitar processor with the lot!



It has a 32bit float point DSP for better sound and True Simulation of Analog Circuits (TSAC) technology to give great modeling with your choice of 60 amplifier models. It has built in looping (up to a massive 60 seconds) , a sample-based drum machine and MP3/WAV player, sophisticated user interface and big colorful LCD display. MG20 is the pro solution for guitarist who wants great tone and function.



The multi-purpose control pedal allows you to switch effects on and off, boost volume for a solo, TAP the delay time and modulation speed, or play/stop your backing track (MP3)!



With an extensional pedal and the built-in Expression pedal, you are going to have superb control on stage! Lots of possibilities!



With the USB port, you are able to update the system and edit tone on your computer! These include their own power supply.



The Tech Features

Large 2.4 inch color TFT LCD

DRUM Machine and Phrase Looper (up to 60 seconds)

Built-in Tuner

New CTRL Footswitch

Built-in MP3/WAV Player

Simple and Intuitive User Interface

Total of 60 Effect Models

36 User Presets + 36 Factory Presets

Scene Selecting to Match the Equipment

32bit Floating Point DSP Processing

Drum Machine and Phrase Looper

USB Port for Updating Software and tone editing.



Package included:

• 1 x NUX MG-20
  
  
• Power Supply Transformer
  
  
• 1 x User's Manual
  • NUX MG-20 Guitar Multi effects processor built-in Drum and Phrase Loop Machine with New CTRL Footswitch Big colorful LCD display
  • Built-in Tuner, Built-in MP3/WAV Player and Independent operator interface with Expression pedal
  • It is a powerful floor processor effect with 60 Effect Models, 36 User Presets + 36 Factory Presets
  • TSAC-True Simulation of Analog Circuits technology,Natural and true tone
  • WAH Pedal and Volume Pedal can be Switched Directly, USB Port for Updating Software and tone editing

User questions & answers

Question:	Can you connect another pedal to it
Answer:	Please visit the NUX official website and contact the nux USA office. call them and ask for help or the replacement. Or you can send messgae to the store you bought it, they will help you to solve the problem. thanks
Question:	How to save the madeup loops for later stage use and how to record it on sd card
Answer:	rechargeable Li-battery inside.
Question:	How much record time on looper
Answer:	The amp sounds like it's instantaneous to me. I am usually within 20 feet of the amp - wireless or direct in. That number could be a max based upon the conditions while using the wireless. All wireless systems have a delay. Metal roofs, distance to the receiver, electrical interference, etc. can all cause response time increases. I've experienced high delay times with $700+ wireless systems in bad conditions.
Question:	Can i use the sd card to record my music or how do i record my music? thank you
Answer:	using the dongle that comes with the amp, I have not experienced any latency issues. Bluetooth is used to for phone connection not instrument.

Product features

NUX MG-20

Key Features:

All in One Guitar Processor

MG-20 is the floor guitar processor with 32bit float point DSP equipped and True Simulation of Analog Circuits (TSAC) technology.

Up to 60 models, 60's looper, sample-based drum machine and MP3/WAV player, sophisticated user interface and big colorful LCD display, MG-20 is the pro solution for guitarist who wants to nice tone and function.

Multi-Effect Killer

The multi-purpose CTL pedal allows you to switch effects on and off, boost volume for solo, TAP the delay time and modulation speed, or play/stop backing track!

With an extensional pedal and the built-in Expression pedal, you are going to have superb control on stage! Lots of possibilities!

With the USB port, you are able to update the system and edit tone on your computer!

• Portable, Bluetooth Desktop Guitar Amplifier
• Built-in Digital Reverb & Delay, 3 channels: Clean, Overdrive and Distortion
• Runs with 9V power adapter, USB connection via power bank or 6 AA size batteries
• 3 Watt Output Power, 9 Drum Patterns and a Metronome,Tap Tempo controls Delay speed and Drums
• Download the Firmware from NUX website. It will keep the Amp in excellent condition