11 best liquids

• 100% Sparkling Mountain Water
• Goes Straight From Mountain to Can (CO2 added)
• Very Drinkable Carbonation Level More Similar to Beer than Soda
• Cans Are Infinitely Recyclable (plastic bottles are not at all)
• #MurderYourThirst #DeathToPlastic

User questions & answers

Question:	What is the carbonation level in liquid death sparkling water
Answer:	About 7lbs
Question:	Will liquid death sponsor my band, esports team, porn convention, haunted hay ride, bear-e-oke night, yoga retreat, or satanic motorcycle rally
Answer:	Our record player came defective. We were able to return it but unable to get another one as it was not in stock any longer
Question:	Does liquid death sparkling water have alcohol in it
Answer:	It came with a needle and I'm guessing you can buy more from manufacturer or on amazon.
Question:	Is liquid death sparkling water an energy drink
Answer:	Yes there should be a power cord

Product features

Straight From Mountain to Can

• Liquid Death comes from an underground mountain source deep below a few hundred feet of stone.
• The water is tapped right from the source into our bottler where it goes directly into air-tight cans (with CO2) after a fancy purification process that 100% maintains the original mineral profile of the water.
• These natural minerals and electrolytes aren’t just good for your body, they will murder your thirst. Instantly.
• Very drinkable carbonation level more similar to beer than soda

DeathToPlastic

• Air-tight cans protect the water from both light and air
• Aluminum is infinitely recyclable. Plastic is not.
• In fact, plastic is not even technically recyclable anymore because it is no longer profitable to recycle. Why?
  • Recycled plastic is such low quality it can’t be used to make new bottles. So there’s no market for buying worthless plastic waste.
  • Plastic costs too much to sort & process. So most recycling facilities now send plastic to landfills because they would go out of business trying to recycle it.
  • Environmental economists now say it is actually better for the planet to simply throw your plastic in the trash so that it requires less trucking to get it to the landfill. Sad stuff.

Limited Edition Case Art

• Limited edition artwork by Will Carsola (creator of the animated tv show 'Mr. Pickles') on the bottom of every case.
• Made from recyclable cardboard

• Work, Sport, Lifestyle - Our multi-functional electrolyte drink has been designed to support all your hydration needs. Simply mix with 16oz of water to make our electrolytes powder drink, packed with vitamin C, B1, B3, B5 and B12
• International Oral Rehydration Formula - Backed by science, engineered to our precise specification and based on a W.H.O formula for hydration. Can be used to support an active day, intense exercise or a big night take, before bed to wake up feeling fresh
• 3 x The Electrolytes With No Added Sugar - Our hydration powder packets provide up to 5 x the hydration of water alone. Chosen by thousands of athletes globally, across running, cycling, swimming and other endurance sports. Use before / during exercise or immediately after to rehydrate
• Rapid Absorption - With a multi vitamin hit. Our precise blend allows more water and vitamins to reach the bloodstream when compared to traditional sports drinks or supplements. Experience clean natural energy, clarity and focus to reach your physical and mental peak
• If Its Not For You…Then It’s On Us - Simply reach out to us and we will take care of the rest. Add Revival to your cart to experience our range of premium electrolyte packets for yourself! (packaging may vary)

User questions & answers

Question:	Does this product contain any stimulants? Caffeine or other
Answer:	Hi there, Our electrolyte powder packets are free from caffeine and other stimulants thanks Team Revival
Question:	Is there a minimum age limit
Answer:	Hi there - Our products are safe for adults and children above the age of 4 :) thanks
Question:	Does this come sugar free
Answer:	Hi there Are sticks all contain dextrose which is an important component for hydration Thanks
Question:	Does it have artificial sweeteners
Answer:	Hi there This range of sticks contain Sucralose Thanks

• 100% Stone-Cold Mountain Water (non-carbonated)
• Air-Tight Tallboy Cans
• Straight From Mountain to Can
• Cans Are Infinitely Recyclable (plastic bottles are not at all)
• #MurderYourThirst #DeathToPlastic

User questions & answers

Question:	Is Liquid Death an energy drink
Answer:	Liquid Death is 100% vegan and cruelty-free. And we never keep our cans in cages.
Question:	Will Liquid Death get me drunk
Answer:	No. But Liquid Death does contain microscopic chainsaw maniacs that will savagely dismember the thirst neurons in your brain.
Question:	Is Liquid Death vegan and cruelty free
Answer:	We use a conservative standard of 2 years. That said, our purification process is quite extensive and because our bottles are opaque, the water should stay fresh if stored properly. The FDA does not require an expiration date for bottled water.
Question:	Does Liquid Death have alcohol in it
Answer:	We use a conservative standard “best by” date of 2 years. That said, our purification process is quite extensive and because our cans and bottles are opaque, the water should stay fresh if stored properly. The FDA does not require an expiration date for bottled water.

Product features

Straight From Mountain to Can

• Most of the top-selling bottled waters are actually just over-purified municipal tap water.
• Liquid Death comes from an underground mountain spring deep below a few hundred feet of stone.
• The water is tapped right from the spring into our bottler where it goes directly into air-tight cans after a fancy purification process that 100% maintains the original mineral profile of the water.
• These natural minerals and electrolytes aren’t just good for your body, they will murder your thirst. Instantly.

DeathToPlastic

• Air-tight cans protect the water from both light and air
• Cans get more ice-cold
• Aluminum is infinitely recyclable. Plastic is not.
• In fact, plastic is not even technically recyclable anymore because it is no longer profitable to recycle. Why?
  • Recycled plastic is such low quality it can’t be used to make new bottles. So there’s no market for buying worthless plastic waste.
  • Plastic costs too much to sort & process. So most recycling facilities now send plastic to landfills because they would go out of business trying to recycle it.
  • Environmental economists now say it is actually better for the planet to simply throw your plastic in the trash so that it requires less trucking to get it to the landfill. Sad stuff.

Limited Edition Case Art

• Limited edition artwork by Will Carsola (creator of the animated tv show 'Mr. Pickles') on the bottom of every case.
• Made from recyclable cardboard

Product description

Brand: Mia secret liquid monomer net weight: 8 oz. Mia secret. Acrylic nail system. Liquid monomer. Made in USA.

• Mia secret
• Acrylic nail system
• Liquid monomer
• Made in USA

User questions & answers

Question:	How is this brand and how is the quality
Answer:	You can buy at this price，if you want discounts and bigger brands，I recommend you to GOBEACE/COM. I bought it. The quality is indeed much better, And it's discounting now
Question:	How much of this do u put in
Answer:	Put in what? In order to use this you must pour a small amount of monomer into a dappen dish, get an acrylic brush wet in the monomer, wipe on side of dappen dish, dip into acrylic powder to form a ball, apply to prepped nails. Does this make sense?
Question:	How is this product on lifting
Answer:	The last bottle I got wasn't so much a liquid as it was a solid. Couldn't pour it out of the bottle, had to dog it out. So I can't really say if it would lift or not. Terrible product!
Question:	I currently use Beauty Secrets powder for my acrylic nails. Will Mia Secret Liquid Monomer work with my Beauty Secrets powder until I finish it
Answer:	Mine does not dry all the way when I used different branded powders with Mia secret monomer

Product features

Mia Secret Mia Secret Liquid Monomer

Liquid Monomer is an advanced blended EMA monomer with a non-yellowing formula, which provides outstanding flexibility, adhesion and absorption when combined with Mia Secret Acrylic Powders. It also prevents discoloration. Available in violet only

About Mia Secret

Mia Secret is a brand with international prestige, recognized in more than 80 countries around the world, covering America, Europe and Africa. With a trajectory in the international market of more than 12 years, our chemical products are created and produced 100% in the United States of America. Prepared under the strictest quality control, with ingredients and formulas friendly to the environment. Mia Secret is endorsed by the entities in charge of sanitary and health control in the United States of America and the European Union, as long as they comply with the requirements and standards required for their commercialization.

MISSION

Create and innovate constantly in the Beauty industry, and be at the forefront of fashion, always creating trends in the 'Nail Art'. Mia Secret, having a high commitment to health and the environment, continuously researches, develops and creates products to always offer its customers the best quality.

VISION

Contribute to the development of the professional of Beauty and entrepreneurs worldwide, integrating products of the highest quality to our model of comprehensive and specialized training; creating tools that will give you better opportunities to change your lifestyle.

• Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
• Safe electronic ignition system; plugs into standard 120v electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate

User questions & answers

Question:	service number
Answer:	785-477-8702
Question:	How much current does it draw
Answer:	Hello Donna. Thank you for your question. This unit uses 120v, 60Hz and draws 2 amps.If we've helped you, please prefer us when you purchase on Amazon. Kind Regards,RossGadgetsGo
Question:	can i vent this thru a masonry chimney
Answer:	It needs to be ported outside.
Question:	What is the highest temperature achievable from this water heater? Will it produce temperatures in excess of 150 degrees F
Answer:	Assuming you have everything hooked up correctly, at 3.5 GPM, the MAX TEMP will be NO MORE THAN 55 degrees ABOVE THE TEMPERATURE OF THE INCOMING WATER. For example, if the incoming water temp is 50 degrees in the winter, then the max winter temp will be 105. In the summer, when the incoming water is 65 degrees, the max summer temp will be 120 degrees. This is the way ALL demand heaters work. Be SURE to check the TEMPERATURE RISE specification on ANY demand heater to know what it is truly capable of. If the TEMP RISE is specified at 3GPM, and you try to set it higher, it may CUT BACK THE FLOW RATE to achieve the higher temp, but it will NEVER exceed the TEMP RISE spec.

Product features

FVI12 Indoor Liquid Propane Tankless Water Heater

• Whole home indoor, propane-powered tankless water heater, that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.

• Safe electronic ignition system; plugs into standard 120-volt electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.

Prefect for Cabins!

Perfect for Tiny Homes!

Perfect for Apartments!

Perfect for Businesses!

Is this the right water heater for you?

Product description

Aeon Flux, the sexy secret agent extraordinaire that took MTV by storm is back on DVD! Follow the deftly skilled Aeon on her adventures through a futuristic world brimming with chaos and corruption. Experience every gripping episode of this cutting edge animated series like never before, as each episode has been digitally restored and has been bolstered with a 5.1 Dolby Digital Surround Sound audio track. Every aspect in the creation of The Complete Aeon Flux has been overseen and endorsed by original creator Peter Chung making this the definitive Aeon Flux collection.

Utopia or Deuteranopia

Trevor has an obsession with Aeon and tries to create a space in the ambassador's body (whose gone missing) for several days now. A Breen named Gildemere teams up with Aeon and tries to bring down Trevor and his evil ways, but instead Aeon turn on Gildemere as he is charged with the murder of the ambassador.

Thanatophobia

Aeon and Trevor play with two peoples life, Sybil and Onan, who are a couple trying to get to Monica, where it has more freedom. They are currently in Brenga, in which Trevor runs. When they both try to escape Onan is successful but Sybil is not. She breaks one of her spinal column and keeping her from falling apart or upright, she needs a device in which Trevor provides. Sybil decides she had enough of Aeon, Trevor and Onan and decides to try her jump into Monica again. Only to see a new device, that she help make, was planted there, cutting her legs off instead.

A Last Time For Everything

Aeon teams up with a double agent named Scafandra, who has hands on her feet. Trevor manages to create a cloning device and he manages to clone Aeon. Aeon then, we think, switch places with her clone but Trevor knows this. The "real" Aeon falls for Trevor, the "clone" Aeon tries to carry on. In the end things get too complicated to explain to the clone and the real Aeon allows herself to get killed as the "clone" runs away.

Ether Drift Theory

Aeon decides to help someone named Lindze, who is trying to get to Bargeld, the man she loves. Who was working with Trevor in a lab somewhere in the middle of a fluid. The fluid puts you in suspend. Bargeld managed to find a "cure" for the fluid, turning it to water. In the end things get complicated and Aeon gets taken over by the fluid as the lab surroundings decays.

The Purge

Aeon tries to stop a criminal named Bambara. Trevor has a new robot looking thing, called the custodian that gives you a conscience. It enters in though your naval. Aeon teams up with a group of people wanting to stop Trevor as well.

The Demiurge

Aeon is afraid of a thing that Trevor managed to acquire. This things acts as a god with peaceful intentions but Aeon wants to destroy it.

Isthmus Crypticus

Aeon is trying to free two bird like creatures (a male and female). The thing is Trevor feels for the female one but she ends up dying. The male on the other hand ends up with Aeon's friend Una, as they soar into the sky.

Reraizure

There is a creature called Narghile that produces a pellet that erases human memories. Rorty and Muriel vows to get rid of these creatures by launching them into the sun. Muriel ends up dying and Aeon, out of guilt, takes her place as Rorty and her try to finish it out. Rorty finds out (from Aeon) that Muriel was cheating on him with Trevor, which he doesn't believe at first. He gets proof himself and can't deal with it. So, he takes the pellet erasing all of his human memories about Aeon, the pellet and Muriel.

Chronophasia

Aeon is caught in a time loop, in a lab in the jungle somewhere. The reason she was going to the lab was, she was planning to save a test subject but go more than she bargined for. She encounters a little boy, who seems to be the cause of all of this. He wants her, but not in a sexual way, in a motherly figure way. We end the episode, as if they are in another dimesion (in the past) as Aeon drives this little boy (presumbaly her son) to baseball practice.

End Sinister

Trevor encounters a device that could wipe out the entire world but Aeon stops him. They both encounter an alien in which Trevor is very interested in. Trevor decides to go back with the alien to their planet and Aeon decides to wait for him, (Trevor) in the very same pod the alien had travel in. Years, (presumably hundreds) past and Aeon wakes up. She notices that the "aliens" had taken over earth and that Trevor is still alive. She then uses the device, (from the beginning) killing the entire race. What Aeon later finds out is that these alien creatures were actually humans. We end as the final words are spoken by Trevor, "It's the evolution of the revolution... may the best man win.

Runtime: 224

# of Discs: 3

User questions & answers

Question:	Why are people using this for electrical wiring if it says for plumbing
Answer:	Dear Customer, it can weld with 1-3mm metal, thanks
Question:	The la-co flux is not supposed to be used to solder silver. why would this be
Answer:	MMA with 1/8" electrode should be able to join at least 1/2" thick. MIG with .30 wire should be able to join 3/8" with multiple passes and correct joints.
Question:	Can this be used with lead solder
Answer:	hello the mig200 torch is not suitable for mig140 welder
Question:	Since this is water soluble, can it be used on pcb's and electronics? will it corrode over time? it's non-acid
Answer:	My welder didn't come with a 2 lb. spool adapter so I fabricated one. I used a short length of 2" schedule 40 pipe over the spindle and welded a piece of 1-1/2" flat bar to the 2" pipe. To carry the 2 pound spool I welded a piece of 5/8" shaft stock to the flat bar and a short piece of 1/8" pipe to the bottom end of the flat bar to prevent the mechanism from rotating when the wire being unspooled by the drive motor. The shaft has a drilled and tapped hole for a 5/16"-24 cap screw and fender washer to retain the spool on the shaft. I also used a 5/8" rubber grommet with 9/16" flat washers of various thickness to apply moderate drag on the spool to prevent unwinding without overloading the drive mechanism. The only concern is the flat bar must be cut short enough to allow it to fit through the opening while simultaneous sliding onto the existing spindle. The existing spindle then has no other function other than to hold my fabricated adapter. This solution is working great for me. I have photos but there are no provisions to upload them in this reply.