12 best flir i7 thermal cameras

Product description

Find problems faster and more accurately with the rugged, high-resolution FLIR i7 point-and-shoot thermal imaging camera. Durable and easy to use, FLIR i-Series infrared cameras offer better images, an optimized display for faster inspections, and a combination of thermal sensitivity and measurement accuracy typically only seen in cameras costing thousands of dollars more. It's ideal for energy auditors, building inspectors, electrical contractors, predictive maintenance specialists, HVAC professionals, insulation experts, restoration contractors, and many more.

The FLIR i7 thermal imaging camera with a 19,600-pixel resolution (view larger).

The FLIR i7 camera has a 140 x 140 resolution for 19,600 total pixels and a thermal sensitivity of <0.10 degrees C. All i-Series cameras capture thousands of calibrated temperature measurements in every image to produce a complete thermal picture that shows where hot spots and other heat-related problems are immediately, so you can find them faster, diagnose them more accurately, and work more efficiently than ever.

Built with ruggedness you can trust, all i-Series cameras are also tough enough to withstand a two-meter drop and stow right alongside other tools, and meet IP43 dust/splashproof standards. It's extremely lightweight at just 13 ounces, helping to reduce fatigue. It has a focus-free lens, 2.8-inch color LCD, rechargeable battery that lasts up to 4 hours, and microSD memory card storage (with an included 2 GB card that can store up to 5,000 radiometric JPEG images).

This camera is backed by FLIR's industry-leading 2/5/10 warranty, providing 2 years of coverage on all camera components, 5 years of battery coverage, and a 10-year warranty protection for the infrared detector.

Perfect for Every Toolbox

FLIR's point-and-shoot i-Series cameras are the most cost-effective choice for getting a new infrared program off to a strong start or arming everyone on your team with the power of thermal imaging. They provide high-quality thermal images and temperature data to help find wasteful energy loss, locate moisture damage, document repairs, detect energized equipment, minimize downtime, and more. Much easier, faster, and safer to use than IR thermometers, and far more accurate, FLIR i-Series cameras are the ideal temp gun replacement for your tool box.

Why Thermal Imaging?

While spot IR thermometers present only a single temperature at a single spot, these Thermal Imaging Cameras give you the whole picture--equal up to ___ spots. Thermal imaging is the most effective method for finding problems or potential problems in a variety of applications across many fields. If you are new to Thermography and need a general purpose Thermal Imaging Camera for troubleshooting, the FLIR i-Series is a great choice. The FLIR i-Series is fully loaded with Thermal Imaging functions at a fraction of the price of a professional grade camera.

What's in the Box

FLIR i7 thermal imaging camera; 2 GB microSD memory card (with adapters); rechargeable battery; 100-240-volt AC adapter with EU, UK, US, and Australian plugs; USB cable; QuickReport PC software; built-in manual lens shutter; hand strap; hard case; operating instructions

From the Manufacturer

The FLIR i7 is an easy-to-use point-and-shoot infrared camera that gives you access to the infrared world. The camera is an affordable replacement for an infrared thermometer, providing a thermal image with temperature information in every pixel. Its rugged design, which passes a 2m drop test, ensure ease-of-use, even in harsh environments.

• The FLIR i7 thermal camera is light-weight, compact, and rugged, for use in harsh environments.
• Easy-to-use: The FLIR i7 is fully automatic and focus-free with an intuitive interface for simple measurement.
• Compact and rugged: The camera?s low weight of 0.365 kg and an accessory belt pouch make it easy to bring along at all times.
• Ground breaking affordability: The i7 thermal camera is the most affordable infrared camera on the market.
• 140 x 140 IR Resolutioin

User questions & answers

Question:	What kind of range does this have? Trying to find a cat who hiding out in the woods next to the house. Could this pick up a cat at 50'-75' away
Answer:	It is not intrinsically safe and it has been discontinued. The replacement is the E75 (not intrinsically safe).
Question:	i have steam and condensate line 1 foot to 6 feet underground the steam is at 400 deg F and the condensate is 150 deg F. will this see them
Answer:	The E4 sensor hardware has a native thermal resolution of 320x240, because the E4 uses the same basic hardware as the E8.An *unmodified* E4 will be software limited to 80x60 thermal resolution, which I agree is unusably small. Google is your friend ;)
Question:	Does it detect water leaks
Answer:	Hello Nathan,No the E4 does not offer blue tooth connectivity. The E40,E50 and E60 offer the blue tooth connectivity. Darryl 866-451-2257
Question:	I want to know the year of manufacture of the product
Answer:	Yes I can see the studs with the thermal camera. It would depend on the temperature difference between the studs and the wall though so some areas I can not see the studs.

Product description

FLIR 435-0012-03 Model FLIR ONE PRO LT iOS Pro-Grade Thermal Imaging Camera For Smartphones, 80 x 60 Thermal Resolution, 1440 x 1080 Visual Resolution, Adjustable Connector Up To 4mm. Operating Temperature- 0 degree Celsius — 35 degree Celsius (32 degree Fahrenheit — 95 degree Fahrenheit) , battery charging 0 degree Celsius — 30 degree Celsius (32 degree Fahrenheit — 86 degree Fahrenheit).

Key Features

• FLIR VividIR Image processing, enhances resolution and accuracy
• OneFit adjustable connector, extends by up to 4 mm, so you can secure your FLIR ONE Pro LT to your mobile device while its still in the protective case
• Multiple spot meters, level/span controls, and reporting through the FLIR Tools Mobile App support more professional problem solving and functionality
• For use with iOS Smartphones
• Thermal Sensitivity/NETD up to 100 mK
• Video, Still image, Time lapse capture modes

Specifications

• Accuracy: ±3°C or ±5%, typical Percent of the difference between ambient and scene temperature. Applicable 60 sec after start-up when the unit is within 15°C — 35°C and the scene is within 5°C — 120°C
• Non-Operating Temperature: -20°C — 60°C (-4°F — 140°F)
• Scene Dynamic Range: -20°C — 120°C (-4°F — 248°F)
• Spot Meter: Off / °C / °F. Resolution 0.1°C / 0.1°F
• Thermal Sensitivity/NETD: 100 mK
• Weight: 36.5 g
• Dimensions (H x W x D): 68 × 34 × 14 mm (2.7" × 1.3" × 0.6")
• Adjustable MSX distance: 0.3 m - Infinity
• File Formats: Still images – radiometric jpeg
• Video and Still Image Display/Capture: Saved as 1440 × 1080
• Focus: Fixed 15 cm - Infinity
• Frame Rate: 8.7 Hz
• HFOV/VFOV: 50° ±1° / 38° ±1°
• Shutter: Automatic/Manual
• Thermal Resolution: 80 × 60
• Thermal Sensor: Pixel size 17 µm, 8 — 14 µm spectral range
• Visual Resolution: 1440 × 1080
• Battery charge time: 40 min
• Battery Life: Approximately 1 hr.

• FLIR VividIR Image processing, enhances resolution and accuracy
• FLIR One displays live thermal infrared imagery using the FLIR one Android app so you can see the world From a thermal perspective
• Multiple spot meters, level/span controls, and reporting through the FLIR Tools Mobile App support more professional problem solving and functionality
• For use with iOS Smartphones. Mechanical shock - Drop from 1.8 meter
• Thermal Sensitivity/NETD up to 100 mK

User questions & answers

Question:	Does this work independent of the phones built in camera or in conjunction with it
Answer:	It works independent on the phones built in camera. It has it's own dedicated regular camera along with the thermal camera.
Question:	Can you operate it directly or while being charged from a portable USB power bank
Answer:	The unit was not designed to operate while being charged.
Question:	Can this see the cold spots left by ghost
Answer:	It will detect a cold spot, whether its from a ghost or not is up to you to decide...
Question:	Is this compatible with Samsung Note
Answer:	Yes it works great with the Samsung Note 8 I have also used it on the Samsung S7, S8 Active, & Note 9

Product features

Electrical Inspection

From finding loose or deteriorated connections, overloads, or defective equipment, FLIR ONE PRO LT will help you get the job done.

Building Inspection

Inefficiencies hide in plain sight. Complete audits and check for energy loss, missing insulation, air infiltration, roofing and other defects.

Restoration

Moisture has met its match. Use FLIR PRO ONE LT for water, damage assessment, leak detection, and monitoring the drying process.

HCAV

The faster you find it, the faster you fix it.Inspect ducts, condenser units, electrical problems, radiant floor, heating, and coil temps in a flash.

Product description

FLIR 60101-0301 Model i7 Compact Thermal Imaging InfraRed Camera with 140x140 IR Resolution, 2.8" High Resolution Color LCD, Stores up to 5000 JPEG image files, 29° Field of view, 9Hz Frame Rate

Key Features

• Temperature accuracy calibrated within ±2°C or 2% of reading to meet the standard you can always trust FLIR to deliver
• Optimized Temperature Range From –4 to 482°F (–20 to 250°C) for electrical, industrial and building applications
• Stores up to 5,000 JPEG image files with all temperature measurements right in the camera ready to download for further analysis and custom reports
• 2.8" (71mm) High Resolution Color LCD
• Li-Ion Rechargable Battery provides >5 hours continuous use
• Includes: 2G miniSD Card with adaptors, Li-Ion battery with 100-240V AC adaptor/charger with EU, UK, US and Australian plugs, mini USB cable, FLIR Tools reporting software, built-in manual lens shutter, and hard case

Specifications

• Thermal sensitivity (N.E.T.D): <0.1°C at 25°C
• Field of view/min focus distance: 29° x 29°/0.6m (2 ft.)
• Detector Type-Focal plane array (FPA) uncooled microbolometer: 140x140 pixels
• Measurement modes: Spot, Area (Max/Min)
• Isotherm: Above/Below
• Temperature range: -4°F to 482°F (-20°C to 250°C)
• Emissivity: Emissivity Table; 0.1 to 1.0 adjustable
• Frame Rate: 9Hz
• Focus: Free
• Spectral range: 7.5 to 13μm
• Image modes: Thermal/Palettes (Iron, Rainbow, and Black/White)
• Set-up controls: Date/time, °C/°F, 21 languages
• Battery Type/operating time: Li-lon/ >5 hours, Display shows battery status
• Charging system: In camera, AC adapter; 3 hours to 90% capacity
• Shock/Vibration/Drop/Encapsulation: 25G, IEC 60068-2-29/2G, IEC 60068-2-6/Drop-proof 2m (6.6ft) IP43
• Dimensions: 8.8"x3.1"x3.4"
• Weight: <12.9oz.

Use the FLIR i7 Compact Infrared Thermal Imaging Camera to detect problems before they become crises. The FLIR i7 is one of the smallest, lightest, and most powerful thermal cameras on the market. This powerful, non-invasive monitoring and diagnostic tool features intuitive one-handed operation, a 2.8-inch LCD color screen, precise thermal sensitivity, a rechargeable lithium-ion battery, and a storage capacity of up to 5,000 images. The included QuickReport software makes sharing and analysis of radiometric images a quick and easy.

Detect hidden problems and make quick damage assessments Large, 2.8-inch LCD color screen with 120 by 120 pixel thermal resolution Store up to 5,000 images on camera's microSD card Rugged body with intuitive, one-handed operation meets IP43 standards QuickReport software analyzes images, prepares reports, and adjusts image settings Two-year warranty on parts and labor

Provides powerful non-invasive monitoring to detect hidden problems. View larger.

Analyze images and generate temperature report using QuickReport software. View larger.

Find Problems, Evaluate Work, and Schedule Repairs

Improperly functioning equipment can be dangerous or lead to lost productivity if not detected soon enough. Infrared inspection with the FLIR i7 will reveal minor variations in temperature that can signal electrical and mechanical failures, leaky air ducts, missing insulation, and moisture problems. Inspect motors, transformers, circuit breakers, pumps, heating and cooling systems, new equipment installations, and repairs by contractors.

Roof and house inspectors, energy auditors, and asphalt-paving companies can rely on thermal cameras to ensure and report on quality jobs. With RESNET approved thermal resolution of 120 by 120 pixels, the FLIR i7 makes it easy to detect hidden problems in your home and work environment, allowing you to make quick damage assessments and be proactive rather than reactive.

2.8-inch color LCD screen View larger.

One-Handed Operation and Large Color Screen

At 12 ounces, the FLIR i7 fits in a pocket, tool kit, or belt. It has an ergonomic handle, easy-to-access buttons, and an intuitive navigation pad that allow for quick, one-handed adjustments and setting changes. The double-molded, rugged design with easy-grip handle construction meets IP43 dust/splash proof standards. The i7 comes packed in a hard carrying case.

You'll enjoy the convenience of focus-free viewing through the large, 2.8-inch LCD color screen and high-resolution display. With a 120 by 120 pixel image resolution, a high accuracy rate of 2 percent, thermal sensitivity of 0.1 degrees Celsius (compliant to NETA testing requirements), and a temperature detection range from -4 to 482 degrees Fahrenheit (-20 to 250 degrees Celsius), the FLIR i7 helps you find problems faster and easier.

The camera features three display measurement modes: spot (center), area (min/max), and isotherm (above/below). Custom settings--including locking the temperature range and configuring your preferred color palette--allow you to tailor the display to your exact preferences.

5,000 Image Capacity and Li-Ion Battery for All-Day Use

With the quick pull of a trigger, the FLIR i7 saves an image to a 512 MB microSD card inside the camera for later analysis. Up to 5,000 radiometric images can be saved in JPEG format. The thumbnail gallery feature allows for quick searching through stored images.

The included rechargeable lithium-ion battery lasts over four hours for uninterrupted inspections, allowing you to get through a project without a single charge. For added convenience, you can plug the charger directly into the camera for recharging--no need to remove the battery.

QuickReport: Instantly Go from Import to Report

Each radiometric image can be organized and analyzed using the included QuickReport PC software. The built-in report templates allow the user to include either two infrared images, or an infrared image and a digital photo, in reports. Image descriptions and text and voice comments can be transferred automatically into the report. Use QuickReport to add your company logo to inspection reports, drag and drop images, preview report pages, and add text comments. Inspection reports can be emailed and exported into Microsoft Excel, Word, or PowerPoint, or to the FLIR Reporter software, without any loss of valuable radiometric data.

QuickReport allows you to adjust the level, span, zoom, and pan of the camera. It features a choice of 10 different color palettes, and allows you to change isotherm and temperature levels, as well as create spot meters, lines, and areas. The alarm displays risk of surface condensation, mold growth, and inadequate insulation at variable parameters that you set.

This camera measures 8-4/5 by 3-1/10 by 3-3/10 inches (H x W x D).

Warranty Information

The FLIR i7 is backed by a manufacturer's two-year limited warranty on parts and labor.

What's in the Box

Camera, microSD card, miniSD adapter, battery, AC adapter with EU, UK, US, and Australian plugs, QuickReport software, USB cable, hand strap, carrying case, and CD of Manual and Documentation included.

From the Manufacturer

Compact InfraRed Camera (120x120 IR Resolution) Point and Click - It is fully automatic. All you have to do is just point and click to see the heat variations in the environment around you and find exactly what you are looking for. It works because everything gives off heat. The FLIR i7 thermal images create a visualisation of heat differences for the naked eye. If you are a plumber, an electrician, install windows, insulation or HVAC systems, the FLIR i5 & FLIR i7 give you an edge in building diagnostics. Catch the Heat of the Moment - The infrared readings from the FLIR i7 are immediately and clearly visible on a full-colour display. You save your readings as an image for later reference. FLIR infrared cameras are ideal for detecting hidden problems, assessing damage, surveying for moisture and leaks, identifying energy losses and poor insulation, as well as finding electrical faults and overheating.

• Pocket-sized and fully automatic design makes it incredibly easy to use, even for first time users
• Highly accurate thermal sensitivity of 0.1°C helps find problems faster and easier
• Focus-free lens for convenient viewing
• High-resolution 2.8-inch color LCD screen
• Measurement modes: Spot (center), area (min/max), and isotherm (above/below)

User questions & answers

Question:	Will this or any of the Flir's show undrground water drainage pipes? I a trying to find them in back yard. If so how deep will it detect
Answer:	I could not get any good quality on this thing. It looks more impressive on the picture. I was trying to film in my house in the evening with lights on and every setting had a yellow hue to it. I don't recommend this camera.
Question:	I need to know if this one, or the E6, will detect leaks thru wood from concrete, or, leaks by temp difference behind walls, heat tubes in concrete
Answer:	Focus the camera
Question:	What is the range of the camera e.g. how far away can I be and how much area can I cover and still get valuable readings
Answer:	Thank you so much for your interest in our products. FLIR cameras are not classified as medical devices. However, we do have the FDA 510(k) approval for our models Exx, T-Series and A3xx/A6xx Series. A model such as E60 runs this certification.

Product description

This is the high-capacity battery for FLIR i-Series IR cameras. Only FLIR offers a 5-year warranty on all handheld thermal camera batteries.

• Rechargeable Li Ion battery
• Compatible with FLIR i3, i5, i7 Thermal Cameras
• Compatible with Extech i3 and i5 Thermal Camera
• 5 hours operating time
• Recharges while in camera.

Product description

The FLIR TG267 takes you beyond the limitations of single-spot IR thermometers, allowing you to see the hot and cold spots that can indicate serious issues. Examine everything from electrical connections to mechanical breakdowns quickly and accurately. This handheld thermal Camera reduces diagnostic time while simplifying reporting and long-term monitoring of equipment and systems throughout a facility. FLIR MSX (multi-spectral Dynamic imaging) improves image clarity by embossing visual scene Details on thermal images, providing added context to help you accurately target potential faults and troubleshoot repairs. Record images to monitor maintenance history and reassure your customer that problems have been Resolved. With a simple user interface, Bluetooth connectivity, storage for up to 50, 000 images, and rechargeable Li-ion battery, FLIR TG267 is ready to go out of the box.

• See beyond the limitations of single-spot IR thermometers with a 160 × 120 (19, 200 pixels) true thermal imager
• Measures body temperature from 89.6 to 108.5-Degrees F (32.0 to 42.5-Degrees C) without contact
• Measure temperature changes instantly, from -25°C to 380°C (-13°F to 716°F)
• Thermocouple Probe Connector and general purpose type-k thermocouple probe support a wide range of temperature measurement processes
• Multipoint laser pointer provides a circle to clearly show the area you are measuring

User questions & answers

Question:	Does this kit come with any kind of a case
Answer:	Bought feb 2012 seems manufactured end 2011
Question:	can i use this device to detect rodents or rats or mice or cats behind walls
Answer:	Short answer, if it has a usb yes. Long answer, but Prolly not very well with live streaming. Also you should be aware that all these cameras in this price range from China with various names and no names all exaggerate the actual specs. I returned mine as the quality was the same as a $40 webcam. I recommend sticking with actual brand names. Yes even some of the brand names are made or assembled in China, but the quality is better. Bigger and better quality cmos sensors are used. These use the same smaller size sensors like in small webcams. Don't let the larger construction of plastic fool you. For about $400 you can buy a good brand name model if you shop around. Don't be deceived by exaggerated specs. This model does not have 48MP sensor. It's between 2 to 6MP INTERPOLATED to 48MP. And no doubt the smallest size too, about 1/3. If this is all you can afford, they do work, but don't expect even mid level quality.
Question:	can it be used to detect warm air loss from a house
Answer:	Dear Customer Please check the status of the camera, when you contact with TV via HDI cable, the menu will show because you don't play back the video, the TV will show same menu with camera screen, you aslo can long press button' UP' to remove the menu. But when you play back the video in TV , i promise the menu won't show in TV.
Question:	About how far away can I see a large animal with this
Answer:	yes, this camcorder works with 1/4 inch standard tripod.

Product description

FLIR one is a lightweight accessory that transforms your iOS device into a powerful thermal infrared camera. FLIR one displays live thermal infrared imagery using the FLIR one iPhone app so you can see the world From a thermal perspective. FLIR one allows you to measure temperature variances.

• Lightweight accessory that transforms your iOS device into a powerful thermal infrared camera
• Capture and share thermal images and videos. Exclusive MSX Technology blends thermal and visible spectrum for more detail and enhanced resolution
• Scene temperature range: 4°f to 248°F (20° to 120°c). Battery charge time - 40 minutes

User questions & answers

Question:	Will this work with an iPhone X and/or a 6th generation iPad
Answer:	does work with iPhone x don't know about ipad
Question:	Can you detect rodents
Answer:	Thank you for your interest in our products. The thermal cameras cannot see through the objects. They will display the temperature differences on the surface of them. If the heat emitted by the rodents is enough to irradiate through the wall, then there is a possibility for you to see the temperature. WE invite you to contact a pest control expert.
Question:	Will it work on a Iphone
Answer:	We are using it with an iPhone 8 but it just plugs into the lightening port and you download an app from the App Store to use it.
Question:	Compatible with iPhone XR
Answer:	If you order the correct one as the iPhone version then yes

Product features

FLIR ONE Gen 3

There’s an invisible world right next to the one you see every day, just waiting for you to explore it with the FLIR ONE. Whether you’re seeing the world in a whole new way or just finding problems around the house, FLIR ONE’s thermal camera gives you a new view of your everyday world. Discover what’s been around you all the time, with FLIR ONE. The FLIR ONE app requires sign in, which enables automatic warranty registration and access to all the latest updates from FLIR.

FLIR ONE App

The improved app lets you access tips and tricks to continually see new ways to use thermal imaging. Stay connected to the user community and easily share your images on social media. See around corners and awkward spaces by connecting to your Apple Watch or Android smartwatch.

MSX Technology

Like previous FLIR ONE models, the third generation includes both a visible and thermal camera. The magic happens through FLIR's patented, multispectral dynamic imaging, or MSX technology, which embosses a visible image over a thermal. The end-result is a better, crisper image, which helps improve overall quality and readability when you need it most. With the FLIR ONE, you won’t need to guess, you’ll just know.

Thermal Superpowers

Even in complete darkness, users can visualize small temperature differences through the lens of the FLIR ONE. Whether you’re trying to determine why your room is so cold, why your wall is starting to bubble and turn awful new colors, or just trying to find where your dog is hiding in the backyard, the FLIR ONE will help you see the formerly unseen.

OneFit Adjustable Connector

Another advancement we’ve developed with the third generation FLIR ONE is our OneFit adjustable height-connector. The OneFit allows you to adjust the length of the FLIR ONE connector so it can attach over most phone cases, eliminating the hassle of removing your case prior to use. The FLIR ONE also features a USB-C version for Android, so whether you want to take a picture of an object or take a thermal selfie (a ‘thermie’), Android users can flip the camera in whichever direction they want.

Product description

FLIR 63908-0905 Model E8-XT Infrared Camera with Wi-Fi and Extended Temperature Range, 3.0" (320 x 240) Color LCD Display, 320x240 IR Resolution, 9Hz Frequency, Field of View (FOV) 45 x 34 Degrees

Key Features

• Automatic and focus-free, with clear on-screen navigation to measurement tools and settings
• Download standard JPEGS, create reports, and share what you've found via a Wi-Fi connection to the FLIR Tools Mobile app
• Lightweight and well-balanced, the E8-XT has an IP54 enclosure and easily withstands a 2-meter drop test

Specifications

• IR resolution: 320x240 pixels
• Thermal sensitivity/NETD: < 0.05°C (0.09°F)/< 50 mK
• Field of view (FOV): 45° x 34°
• Minimum focus distance: 0.5 m (1.6 ft.)
• Spatial resolution (IFOV): 2.6 mrad
• F-number: 1.5
• Image frequency: 9 Hz
• Focus: Free
• Detector type: Focal plane array (FPA), uncooled micro bolometer
• Spectral range: 7.5–13 μm
• Display: 3.0" 320x240 color LCD
• Image modes: Thermal MSX, Thermal, Picture-in-Picture, Thermal blending, Digital camera
• Object temperature range: –20°C to +250°C (–4°F to +482°F)/10°C to 550°C (50°F to +1022°F)
• Accuracy: ±2°C (±3.6°F) or ±2% of reading, for ambient temperature 10°C to 35°C (+50°F to 95°F) and object temperature above +0°C (+32°F)
• Digital camera, resolution: 640x480
• Digital camera, FOV: 55° x 43°
• Wi-Fi: Standard 802.11 b/g/n
• Shock: 25g (IEC 60068-2-27)
• Vibration: 2g (IEC 60068-2-6)
• Drop: 2m (6.6ft.)
• Battery type: Rechargeable Li-ion battery
• Battery voltage: 3.6V
• Size (LxWxH): 9.6" x 3.7" x 5.5"
• Weight: 1.27 lb.
• Contents: Infrared camera, Hard transport case, Battery (inside camera), USB cable, Power supply/charger with EU, UK, US and Australian plugs, Printed documentation.

• Easy to use: The FLIR Ex series cameras are fully automatic and focus free with an intuitive interface for simple measurements in thermal, visual, or MSX mode
• Image enhancement: MSX and VividIR enhanced image processing and Video capabilities give you the sharpest mobile thermal imaging performance
• Ground breaking affordability: The FLIR Ex series cameras are the most affordable infrared cameras on the market
• Automatic and focus free, with clear on screen navigation to measurement tools and settings
• Lightweight and well balanced, the E8 XT has an IP54 enclosure and easily withstands a 2 meter drop test

User questions & answers

Question:	I am rephrasing the question. Can infrared camera detect a cat hiding behind fiberglass insulation material in the wall
Answer:	Stone Fix is NOT designed for slate. Since slate is an oily stone.
Question:	Can the e4 be used with the wifi powered off? thank you
Answer:	Yes, it will. It even works on granite, marble, travertine, quartz, caesarstone and laminate.
Question:	can it detect a cat hiding inside fiberglass
Answer:	If the floor is flat and level you could do it. This product is self leveling and it does not set up fast, so if your floor is uneven some spots will be thin and others will be thicker. The other factor is temperature. This stuff likes it warm if it says apply 70 to 80 deg they mean it. The bubbles release better. That brings up another thing to consider when applying, will you be able to reach the center of the floor to release the bubbles that form? There will be bubbles. Hope this helps answer your question.
Question:	Has anyone tried to see mosquito larve in shallow water or stagnant water
Answer:	The gallon kit will cover 12 sq ft according to the brochure. That’s 1/2 gallon of part A and 1/2 gallon of part B. That’s misleading if you are using super clear liquid glass because it is mixed 2 to 1

Product features

Building Inspection

Inefficiencies hide in plain sight. Complete audits and check for energy loss, missing insulation, air infiltration, roofing and building defects.

HVAC

The faster you find it, the faster you fix it. Inspect ducts, condenser units, electrical problems, radiant floor heating, and coil temps in a flash.

Home Inspection

Protect the house and check for building defects, energy inefficiencies, moisture damage, and electrical problems.

Restoration

Moisture has met its match. Use FLIR ONE Pro for water damage assessment, leak detection, and monitoring the drying process.

Product description

The FLIR E5 Compact Thermal Imaging Camera assists professionals and DIY-ers alike in spotting hidden electrical, roofing and plumbing issues, so repairs can be made quickly and affordably. Using advanced, patented MSX Technology, the FLIR E5 provides enhanced, high-resolution radiometric images, which can help identify overheated circuits, hot and cold zones, condensation, moisture damage and much more. Simply aim, click and shoot with your FLIR E5. Use the free FLIR Tools reporting software to review images, analyze the data and generate detailed reports for companies, clients or prospective Homeowners. Featuring Iron, Rainbow and Gray color palettes and center spot, area box, auto hot/cold detection measurement modes as well as Automatic min/max markers. The FLIR E5 comes with a hard transport case, Li-Ion rechargeable battery, Universal power supply/charger with four plugs, external battery charger, USB cable, User manual, and FLIR Tools software for PC and Mac OS. Storage Temperature Range: –40°C to 70°C (–40°F to 158°F).

User questions & answers

Question:	For the E6, does the wifi allow me to stream in real time to my computer? And would it be possible to use a 3rd party app to record said stream
Answer:	From my understanding, live stream only works with apple products which have Flir Tools installed- Flir works horribly with android devices. A wired connection to a computer is needed for the computer. A third party screen record app on the computer should work without an issue.
Question:	The packaging says this comes with a battery charger in the box. Mine failed to come with one. Who can i get ahold of for this
Answer:	Try the seller.
Question:	I trim horses hooves. Sometimes horses have heat in their hooves that causes pain. Do you think this device could pinpoint the exact location
Answer:	Thank you for your inquiry. We would recommend going with a higher resolution, more sensitive unit such as the FLIR T530.
Question:	Will it image a moisture issue behind drywall - leaking drain pipe
Answer:	Thank you for your inquiry. The FLIR E6 would be an excellent choice for finding moisture. We sell a lot of cameras for that exact application. The moisture would likely need to be on the backside of the drywall to be detected. It will also need to be a different temperature than the drywall.

Product features

Building Inspection

Inefficiencies hide in plain sight. Complete audits and check for energy loss, missing insulation, air infiltration, roofing and building defects.

HVAC

The faster you find it, the faster you fix it. Inspect ducts, condenser units, electrical problems, radiant floor heating, and coil temps in a flash.

Home Inspection

Protect the house and check for building defects, energy inefficiencies, moisture damage, and electrical problems.

Restoration

Moisture has met its match. Use FLIR ONE Pro for water damage assessment, leak detection, and monitoring the drying process.

Product description

The FLIR MR176 Imaging Moisture Meter with IGM is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture. Featuring Infrared Guided Measurement (IGM) technology, the FLIR MR176 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. Coupled with a field-replaceable temperature and relative humidity sensor, and automatically calculated environmental readings, the FLIR MR176 delivers added convenience and ease of use, producing the right measurements faster. Note: Pin Sensor measurements are provided as a percentage of moisture content; Pinless Sensor measurements are provided as a relative value requiring comparison to a known dry surface.

• Item is a Class II laser product, 1mW power output.
• Customized thermal images: moisture, temperature, relative humidity, dew point, vapor pressure, mixing ratio
• Equipped with a laser and cross hair to easily reference the exact location of the potential moisture issue seen in the thermal image
• Field-replaceable temperature/relative humidity sensor
• Progressive Environmental Stability Indicator removes response time error when you move to different measuring locations
• Thermal Imager, Thermal Camera, Pinless Moisture meter

User questions & answers

Question:	Would a thermal camera and moisture meter accomplish the same tasks as this unit
Answer:	YES.. If your looking for heat loos plan on a cold day, that will make the temperature differences show up over a lager range.
Question:	Is this essentially the same camera as the tg165 but with extra features that make it good for moisture
Answer:	i need to find a cat also,i think its under the house, did you find your cat? did you use the imager to look through the floorboards, im sure mine is under the floor and i want to make sure this camera will work on the flooring
Question:	If i need to find a steam leak in a 7000 sq ft apartment building, should i get this or the tg
Answer:	The short answer is, it depends. Maybe if the pipe closer to 1 foot rather than six feet, or if the pipe temperature closer to 400 instead of 150...A thing to note. This device will not show you an image of the underground pipe itself. But because it's ultra-sensitive at measuring surface temperature, it will likely show you the vicinity of ground above it due to the heat that radiates from it. And how well the area shows up depends on those factors plus things like the density, type and moisture of the soil, since conductivity of heat is a factor, as well as, the outside temperature and any obstructing ground material, such as leaves or grass.So if, for example, an uninsulated 2 1/2-3" or more pipe @ say 1-2 ft. under is closer to the 3-400 degree range consistently for a few hours and is packed with dense claylike soil without much vegetational obstruction, then the area will likely show up well on a cool/mild day if you're able to get up a good 10-20' elevation to see the whole surrounding area for measurement comparison. Again, it all depends. Deeper than 2 ft is is questionable performance in almost any case since the ground is such a good insulator. This device would suit you better if you've already determined generally where to dig, and now you need to know if you're getting close and the directional accuracy. That's where its area measurement mode feature really shines. Good luck!
Question:	Why use this instead of just a normal thermal camera
Answer:	It can help 'locate' a water leak problem by detecting moisture in unwanted areas.

Product features

FLIR MR176 Imaging Moisture Meter Plus with IGM

The FLIR MR176 is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture. Featuring Infrared Guided Measurement (IGM) technology, the MR176 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. Coupled with a field-replaceable temperature and relative humidity sensor, and automatically calculated environmental readings, the MR176 is convenient and easy to use. You’ll produce the right measurements — faster.

What Is IGM?

IGM is powered by a FLIR Lepton thermal imaging sensor that can show you temperature differences across your target. It guides you to the precise location of potential problems that require further testing or investigation.

Identify Hidden Moisture With IGM

An 80 x 60, 4800-pixel Lepton thermal imager powers IGM to show you potential areas of moisture so you can troubleshoot quickly. Customize your thermal images by choosing from four color palettes and selecting which measurements you want to take (moisture, temperature, relative humidity, dew point, vapor pressure, mixing ratio).

Get Precise Readings

With the MR176 you can confidently take measurements and analyze readings. A progressive environmental stability indicator removes response-time error when you move through a site to different measurement locations, and it informs you when the relative humidity readings have reached a steady state. Take either pinless moisture measurements, or use the external pin probe with expandable probe options. A lock-image setting prevents extreme hot and cold temperatures from interfering with your images while you scan for issues.

Get More Work Done In Less Time

This meter is convenient, flexible, and easy to operate. The temperature/relative humidity sensor can easily be removed and replaced when needed to reduce downtime. Document readings and images, download them with the included USB cable, and then use free FLIR Tools software to quickly generate reports.

Product description

The FLIR ETS320 is the first true electronic test bench camera, designed for Quick temperature checks on PCB boards and electronic devices. The FLIR ETS320 is sensitive enough to detect subtle temperature differences with an accuracy of ±3°c, so you can quickly find hot spots and potential points of failure. The 320 × 240 infrared detector offers more than 76 000 points of temperature measurement, eliminating the guesswork of legacy measurement tools. Designed specifically for bench-top work, the battery-powered FLIR ETS320 connects to your pc for immediate analysis and sharing of thermal data. Product comes with camera, mount, stand, power supply, USB cable, and FLIR tools+ software.

• 320 x 240 IR sensor offers more than 76K non-contact points of temperature measurement, eliminates guesswork by pinpointing hot spots and potential points of failure.
• Sensitive enough to detect temperature differences smaller than 0.06°C, for fast identification of faults and thermal gradients.
• Measurement accuracy of 2°c aids in attaining quality assurance and factory acceptance of printed circuit boards.
• Ergonomically designed for lab electronics measurement, the ETS320 is battery powered, Wireless, and hands free.
• With complete measurement and analysis on the camera, the ETS320 measures small components down to 150 µm per pixel spot size, from a minimum focus distance of 70mm.

User questions & answers

Question:	Can flir ets320 detects hot spots that heat up by a leakage current in the range of 50ua to 1ma in a microcircuit that powered from a 2.8v battery
Answer:	30'
Question:	How does it compare to Fotric 225 thermal camera
Answer:	Unless there's a great temperature difference between the pipe and surrounding grounds. NO.Drainage pipes are 3ft to 6 feet or more down. you will only see the top layer of ground.
Question:	Can you adjust the height and the lens focus
Answer:	Either will work. But it really is a question on the ability to see a temperature difference between the items. If it's a water leak the water would cool down leaking around the area if hot. So the a large spot would show up in a section. if its cold water leaking than the water would warm up to the inside wall temperature so you may still have issues looking for a large temperature difference. you going to have to be lucky catching the leak in progress rather than one that's been going on for a while. Heat tubes in the floor would be possible to see thru wood and some extent concrete. Again the heat from the tubes diffuses around the area as it should so watching leaks would be hard unless you able to practice on them..

Product features

The FLIR ETS320

The FLIR ETS320 is an affordable solution for reducing test times and improving product design for electronic board and device evaluation. Whether the goal is R&D or product testing, heat can be an important indicator of how a system is functioning. The ETS320 helps engineers and test technicians collect accurate, reliable data in seconds and analyze it quickly.

The ETS320 thermal imaging solution is the first FLIR camera designed for quick temperature checks on PCB's and electronic devices in the lab. Save time and eliminate guesswork by measuring temperatures across more than 76,000 points at once with the sensitive, accurate 320 x 240 detector. Engineered specifically for lab electronics testing, the ETS320 is battery powered and hands free. It connects via USB to your PC for immediate analysis and sharing of thermal data.

Hands-free Use

The ETS320 is designed for hands-free laboratory testing, with simplified features that allow users to focus on their work instead of on the camera controls.

Ergonomic Design

The ETS320 features a crisp 3” LCD display provides immediate thermal feedback and comes assembled on a pole mount that’s easy to set up and adjust.

FLIR Tools+ Software

FLIR Tools+ software for instant analysis, including Time vs. Temperature measurement.

Ready when you are

The ETS320 comes ready to work, as soon as you take it out of the box.

Straightforward Connectivity

Plug the ETS320 into your computer via USB for immediate data sharing with FLIR Tools+.

Image Adjustment

Adjust the ETS320 height up and down to image larger or smaller components.

Image Capture

Save fully radiometric images with the push of a button.

Product description

Bundle includes Deco Gear 8,000mAh Power Bank and 3FT USB-Type C Cable FLIR ONE Pro LT has the power to find hidden problems faster than ever. With the enhanced resolution of FLIR VividIR processing, added perspective of FLIR MSX, and the convenience of the OneFit adjustable connector, FLIR ONE Pro LT works as hard as you do. Whether you're a professional or just focused on DIY projects, the FLIR ONE Pro LT has the powerful features you need at an affordable price. If you need to inspect electrical panels, find the source of HVAC failures, or discover hidden water damage, the FLIR ONE Pro LT offer the measurement tools and outstanding thermal resolution you need to help you finish the job fast. Key FeaturesFLIR VividIR Image processing, enhances resolution and accuracyOneFit adjustable connector, extends by up to 4 mm, so you can secure your FLIR ONE Pro LT to your mobile device while its still in the protective caseMultiple spot meters, level/span controls, and reporting through the FLIR Tools Mobile App support more professional problem solving and functionalityFor use with USB Type-CThermal Sensitivity/NETD up to 100 mKVideo, Still image, Time lapse capture modesAccess real-time thermal tips through the recently updated FLIR ONE app and prepare professional reports through FLIR Tools mobile appSet multiple temperature spot meters and regions of interest for concurrent measurements with the easy-to-use interfaceOneFit Adjustable ConnectorThe FLIR ON...

• FLIR VividIR Image processing, enhances resolution and accuracy. OneFit adjustable connector, extends by up to 4 mm, so you can secure your FLIR ONE Pro LT to your mobile device while its still in the protective case.
• For use with USB Type-C. Multiple spot meters, level/span controls, and reporting through the FLIR Tools Mobile App support more professional problem solving and functionality.
• Thermal Sensitivity/NETD up to 100 mK. Video, Still image, Time lapse capture modes. Set multiple temperature spot meters and regions of interest for concurrent measurements with the easy-to-use interface.
• IN THE BOX: FLIR One Pro LT Pro-Grade Thermal Camera for Smartphones (USB Type-C) | Limited 1-Year Warranty
• BUNDLE INCLUDES: Deco Gear Wireless Power Bank | USB-to-USB-C Charging Cable | Deco Essentials 3FT Braided Type-C Charge & Sync USB Type-C Cable

Product features

OneFit Adjustable Connector

The FLIR ONE Pro LT features the adjustable OneFit connector, which extends up to 4mm, allowing you to connect your device through most protective phone cases. Get the job done anywhere, anytime.

Turn your smart phone into a pro-grade thermal camera to solve problems smarter, safer, and faster.

Bad wiring and fuses tend to heat up as they fail, hiding from sight until the problem becomes “self-evident.” Fortunately, thermal imaging instantly make those hot spots clearly visible so you can troubleshoot electrical systems quickly, and make repairs immediately. Scan breaker panels, fuses, connections, and more to get an instant picture of impending trouble.

Pro-grade camera that's worksite tough

Built to take the abuse that working on a jobsite dishes out every day, FLIR ONE Pro LT is rated to take a drop from 1.8 meters and tough enough for any environment.

MSX Technology

The FLIR ONE Pro LT includes both a visible and thermal camera. The magic happens through FLIR's patented, multispectral dynamic imaging, or MSX technology, which embosses a visible image over a thermal. The end-result is a better, crisper image, which helps improve overall quality and readability when you need it most. With the FLIR ONE, you won’t need to guess, you’ll just know.

In The Box

Included with your One Pro LT is a rugged carrying case and USB to USB-C Charging Cable.

VIVIDIR IMAGE PROCESSING

Unique image processing technology that enhances resolution and accuracy, to help you catch potential problems early and reliably diagnose problems.

FLIR ONEFIT CONNECTOR

Adjustable connector extends by up to 4 mm, so you can secure your FLIR ONE Pro LT to your mobile device while its still in the protective case.

HARD-WORKING APP

Work-based features such as multiple spot meters, level/span controls, and reporting through the FLIR Tools Mobile App support more professional problem solving and functionality.

Deco Gear Power Bank 8000 mAh Digital Display with Wireless Device Charging

When you can’t find an outlet, the Deco Gear Wireless Power Bank brings your phone back to life wherever you are.

The ideal solution for active users on the go, the Deco Gear Wireless Power Bank packs plenty of power to help you get through the day and bring your cell phone to full charge. With an 8,000 mAh capacity, get multiple phone battery cycles out of one full charge.

With that power, this power bank offers multiple methods to transfer it – use the traditional USB connections to charge up to two devices at once or utilize the wireless charging pad to bring your device battery to full strength.

Included is an 11-inch USB-to-USB-C charging cable that works with compatible devices. If your phone needs a different connection, you can use your own charging cable as long as it’s compatible with a USB connection.

A digital display lets you know the status of your portable battery in percentage form and lets you know current charging status.

Deco Essentials 3FT Braided Type-C Charge & Sync USB Cable

• Nylon fiber braided fast charging USB Type-C Cable
• Quickly sync your data, photos and music with your laptop, tablet or mobile device.
• Transfer speeds up to 480Mbps
• 2.4A fast battery charging

Product description

For iOS devices with Lightning port Discover hidden & invisible problems 4x improvement in thermal resolution Find water damage, inspect components Measure temperatures between -4°F and 752°F Tough, can take a drop from 1.8 meters Limited 1-year manufacturer's warranty

• POWERFUL - Infrared camera mobile accessary with adjustable OneFit Connector lets you find hidden electrical problems, energy loss, water damage, and other heat-related issues- Camera Only batteries are not included
• FREE FLIR ONE mobile app (recently updated) with exclusive content, real-time professional tips and tricks, multiple spot meters, and easy automated reporting to document your findings -USER REGISTRATION NOT REQUIRED
• TEMPERATURE RANGE: -4 Degree F and 752 Degree F (-20 Degree to 400 Degree C). Measure temperature accurately and from a safe distance
• IMAGE ENHANCEMENT - MSX and VividIR enhanced image processing and video capabilities give you the sharpest mobile thermal imaging performance
• This product is for commercial purposes only and is export controlled under US regulations for non-US military end-users and military end-uses. Battery life- Approximately 1 hour. Battery charge time- 40min

User questions & answers

Question:	Will it work with Mophie case
Answer:	All Generation 3 FLIR ONE cameras feature FLIR’s new OneFit™ connector which provides 4mm of adjustment. This 4mm allows for connectivity to a FLIR ONE camera through most protective cases, so you don’t have to choose between thermal vision and safeguarding your device. Otterbox Defender and LifePro protectives cases are the exception; rugged cases like these products require a port extender or adaptor to complete connectivity with your phone. Which adaptor to select will depend on which Generation FLIR ONE you own and your phone’s operating system.
Question:	How is the Pro version different than the original Flir One
Answer:	The resolution is improved by 4x. Flir one has 80x60 vs. Flir one pro has 160x120 The temperature range is improved: flir one -20 °C – 120 °C vs. Flir one pro -20°C – 400°C. The connector for android is a standard connector for the flir one and a C mount for the Flir one pro.
Question:	The android c model details indicate that model is not compatible with s8, s9 etc, however the item photos show it to be attached to a galaxy s
Answer:	I can confirm that it works with the Note 8 and the Note 9. As to the S8 or S9 I can neither confirm nor deny whether they are compatible.
Question:	How is the Flir One Pro for equine use
Answer:	I believe that I know what you are intending to use it for as I am looking at this for the same reason. Crackpots, step aside. Looking at the video that someone took of their hand, I am less enthused about the utility of this particular imaging for use with equines, canines, felines or humines (see what I did there?) as the color palate may not be broad enough to distinguish normal tissue perfusion (which should show cooler, blue & green) from areas with inflammation/infection (which should show red/white). I do not know if the color range can be adjusted. I have seen a thermography done by the imbedded camera in the CAT phones and it is excellent. Much like you would expect to see if done with a specific 'medical' unit. I do not know if the images I was looking at were adjusted for the surface source. Do not know if that is a 'real thing'. or not. I have just begun to do my investigation into this but am specifically looking at this for tissue/animal/equine use, so would be very interested in the actual real experience anyone has had with this application.