10 best iaq tester

Product description

Airthings Wave Mini is small in size but big in impact. This indoor air quality monitor is the first step into understanding your indoor air quality, or a great addition to your existing Airthings air quality ecosystem. The Total VOC sensor monitors toxins and chemicals in your air that can cause negative health effects. A VOC detector is key to ensure the optimal health and comfort levels of every room. An additional humidity sensor enables you to enjoy the best indoor humidity level for your specific home. Avoid mold growth and the increased spread of infectious diseases by maintaining healthy indoor humidity levels. In addition, the temperature sensor allows you to maintain not only a healthy home but a comfortable one too. The mold risk indicator will tell you when the conditions in a space are at risk for mold growth. This means it is a great device to use to prevent mold or to proactively watch out for the chance of mold. Get your results straight to your smartphone via Bluetooth or check the Airthings web dashboard for detailed and meaningful insights into your air quality.

• FOR EVERY ROOM: Airthings Wave Mini is the ideal indoor air quality companion for any room in the home.
• FRESH AIR SENSORS: Effortlessly monitor toxins and chemicals (Total VOCs), humidity and temperature to ensure optimum comfort and healthy levels in every room.
• TAKE CONTROL: Airthings Wave Mini alerts you when levels are too high, enabling you to ventilate accordingly.
• WHAT ARE VOCS? Volatile Organic Compounds (VOCs) are toxins and chemicals that can cause serious short and long-term health effects. They are emitted from everyday items including cleaning supplies, cooking fumes, paints, plastics, toys and outdoor pollution.
• HEALTHY HUMIDITY: Easily maintain healthy indoor humidity levels between 30% - 59% as the EPA recommends.
• QUICK AND CLEAR RESULTS: Wave in front of the monitor for a visual indication or connect the Airthings App via Bluetooth for detailed insights into your air.
• MOLD RISK: Mold growth at home affects the air we breathe triggering asthma, allergies, and illness. Stay ahead of mold growth with Wave Mini, because once you see it, it's too late

User questions & answers

Question:	Can the wave mini detect cigarette smoke,or detect the smoke has changed the air quality
Answer:	It monitors air quality for any changes so I would say it should. Just recently purchased this so I’m still learning what it can do.
Question:	Does the wave mini provide CO readings as well
Answer:	Hi there! Thanks for your question. The Wave Mini does not measure CO (Carbon Monoxide). It does, however, provide measurements for TVOC (Total Volatile Organic Compound), temperature, and humidity. You can learn more about Wave Mini on our website here: https://www.airthings.com/en-us/wave-mini and you can always reach out to us at [email protected]. Again, thanks for your question! -Tom from Airthings support
Question:	how is mini diferent than Wave
Answer:	Thanks for your question! The Wave Mini does not detect Radon like the Wave. The Wave Mini has 3 sensors - Temperature, Humidity, and TVOC (total volatile organic compounds). The Wave Has 3 sensors - Temperature, Humidity, and Radon. Let us know if you have any other questions at [email protected] or chat with us directly on the Airthings website! Again, thanks for your question! -Tom from Airthings Support
Question:	Does it monitor PM
Answer:	Hi there! Thanks for your question. The Wave Mini does not have a PM sensor, however, it is equipped with a TVOC (total volatile organic compound), temperature, and humidity sensor. If you have any other questions let us know at [email protected] or simply chat with us directly from the Airthings website! -Tom from Airthings Support

Product features

Wave to know your levels.

Wave in front of your device to get a visual indication of your air.

Color-coded.

By waving, the light ring will flash green (healthy), yellow (warning) or red (danger) based on your air quality levels.

Free App + Dashboard.

Access real-time detailed data from your devices and analyze your indoor air.

Mold Risk Indicator

The mold risk indicator will tell you when the conditions in a space are at risk for mold growth. This means it is a great device to use to prevent mold or to proactively watch out for the chance of mold.

Volatile Organic Compounds

Volatile organic compounds- (VOCs) are toxins found in everyday items including cleaning products, furniture and paint. The Wave Mini’s Total VOC sensor alerts you to high levels of a long list of chemicals, so you can adjust ventilation accordingly.

Humidity

Moisture promotes mold and aggravates asthma symptoms while dry air can lead to cold and flu. The EPA recommends humidity levels of between 30% - 59%. Maintain comfortable indoor humidity levels indoors by monitoring daily.

Temperature

Not only is it uncomfortable, but the wrong temperature can also affect sleep patterns, mood, and alertness. A temperature sensor is a necessity for every home.

Fresh air indoors.

By monitoring every day you will know when to ventilate and make small changes to improve the air. VOC air purifier, VOC free paint and low VOC flooring can also help to reduce the levels. Check that your changes are working in the Airthings app.

Know what to avoid.

VOCs are emitted from everyday household items. Often kids rooms have high VOC levels due to toys and plastic products. Similarly, Unhealthy chemicals can also be emitted from cleaning products, furniture and flooring.

Get the right balance.

Did you know that according to a Harvard Review 21% of the 21.8 million cases of asthma are annually attributable to residential dampness and mold? Avoid mold growth and the increased spread of infectious diseases by maintaining healthy indoor humidity levels.

Product description

From across the room or across the country, your Sensi Wi-Fi thermostat makes it easy to remotely control and schedule your home comfort - Anytime. Anywhere. Designed to work with the wires you already have, Sensi thermostat does not require a common wire (c-wire) for most installations, so it is compatible with the HVAC equipment in many homes in U.S. Canada. A c-wire is required for heat-only, cool-only and heat pump (without aux) systems, and for use with Apple HomeKit. Check to make sure it will work for you at sensi.emerson.com/compatibility . The intuitive app walks you through each step of installation with custom configured instructions, removing all the frustration and guesswork from the installation process, so you can be up and running in no time, no experience required. Put your comfort on your terms using location-based temperature control with geofencing or creating custom heating and cooling schedules with the flexible 7-day scheduling option with the ENERGY STAR certified Sensi thermostat. Both energy saving features you save about 23% on your HVAC energy usage so you can save money without compromising your comfort. Plus, Sensi integrates directly with Amazon Alexa, Apple HomeKit, Google Assistant and Wink home automation platforms. Connect to Amazon Alexa to control your home temperature with simple voice commands, or just ask Siri to set, raise or lower your home temperature when using Sensi with Apple HomeKit. Whats more, Sensi Wi-Fi Thermostat has been named the Best Value smart thermostat of 2018 by USA Todays Reviewed.com Energy savings calculated by comparing operation time for a nationwide sample of Sensi users with temperature adjustments averaging 4 degreeF vs. users with no adjustments. Savings vary based on equipment type/condition, insulation, climate temperature adjustment size/frequency. Based on survey results of 2120 respondents that purchased and installed a Sensi thermostat in 2018, approximately 70% reported installing in 30 minutes or less. Adding a common wire may impact installation time. Does not work with electric baseboard heat and some other systems. System requirements for mobile app: iOS - 10.0 or above Android - 4.2 or above (5.0 or greater to use the Geofencing feature).

• EDITORS CHOICE BEST VALUE SMART THERMOSTAT by USA Today’s Reviewed.com
• SAVE ABOUT 23% ON HVAC ENERGY*: The ENERGY STAR certified Sensi thermostat helps you save on your HVAC energy costs, with features like geofencing, 7-day flexible scheduling, remote access and in-app system usage.
• MOST INSTALL IN 30 MINUTES OR LESS**: Use the built-in level and step-by-step app instructions for a quick installation. Skip any extra work painting or patching the wall thanks to the standard thermostat size.
• SMART HOME COMPATIBLE: Works with Amazon Alexa, Google Assistant, Apple HomeKit (c-wire required), and Samsung SmartThings smart home platforms.
• USAGE REPORTS: Monitor current day and historical heating, cooling and fan runtimes right in the app.
• CONTROL FROM ANYWHERE: Remotely control your home comfort from your smartphone or tablet using the Sensi mobile app for Android and iOS devices.
• SMART ALERTS: Sensi features smart alerts to help detect extreme temperature and humidity levels in your home.
• CIRCULATING FAN: Air circulation may improve indoor air quality by helping to regulate temperature and prevent buildup of particles and mold.

User questions & answers

Question:	Can you program just the fan mode
Answer:	Hi there, this unit REQUIRES an internet connection, based on a WiFi (wireless) connection. Once the device establishes an internet connection to the Honeywell cloud (which is cool!) you can effectively control the thermoostat from anywhere you have an internet connection.... even your smartphone. Enjoy!
Question:	Is it smart enough to decide whether to run the heater or cooler to keep the temperature fixed
Answer:	The WiFi setup requires you to create an account on mytotalconnectcomfort.com. It’s not that hard. The biggest problem with this thermostat is the unreliable remote connectivity ever since Honeywell spun off their thermostat division 6 months ago. Now it’s frequent periods of time where the thermostat will not respond to remote commands. It’s maddening
Question:	What if i have a C wire
Answer:	When you put it on circulate, the fan comes on for about 10 minutes every 20 minutes or so. The owners manual says it runs about 35% of the time. I used this feature this Fall with the system off (no heat or a/c) just to circulate the air through my Filtrete filters.
Question:	Can you create a fan schedule? I’d like the fan to always run from 10pm until 6am
Answer:	These thermostats are not the same. Even the screen is different. The RTH9580 doesn't have the 3D look of the 9300 series.

Product description

Thermostat

• Made in United States
• Package length : 6.0"
• Package width : 2.0"
• Package height : 8.0"
• Material Type: Plastic

User questions & answers

Question:	Does this work with smartthings
Answer:	Min Cycle Off Time: Enables you to configure the compressor off time between cycles. This is adjustable from 240 - 900 Seconds
Question:	If power goes out and wi-fi is lost, can it be reconnected remotely or automatically
Answer:	If it is not connected to internet, remote access is nit possible. You cannot access it by your mobile device but thermostat will still works as it is. It has its own power and if you set it before the internet connection is lost, it will still works with all your settings and preferences.
Question:	What do you mean bty requiring "C" wire
Answer:	Yes but the difference between heating and cooling will auto set with a minimum 5 degree difference. 5 degrees is quite a bit so I really don't use it much. You can't just set it to 70 and have it hold that temp and if I had to guess, it's due to the fact that heating and cooling use the same ducts and constantly switching from hot to cold will cause condensation and really isn't efficient at all. Really, the only time you'd use this feature is during fall and spring when the temperature outside can vary. Generally, mine is either set to heat or cool depending on the season. That being said, if you're ok with a 5 degree swing either way then it works well :-).
Question:	What is the difference between this thermostat and the rth9580wf
Answer:	You can have the fan run three different ways: -AUTO (in sync with a call for COOL or HEAT) -Always ON -ON for x minutes per hour (circulate function)

Product description

Monitoring and controlling your indoor air quality is a breeze with the use of an Aprilaire 8620W Wi-Fi Thermostat. With features like automatic humidifier and dehumidifier control, automatic air cleaning, and temperature control, an 8620W will ensure that the air in your home is clean, fresh, and comfortable for you and your family. Our Wi-Fi thermostats make it easy to control indoor air quality anywhere and anytime, all from the convenience of your smart phone or tablet. Reduce your energy costs with the push of a button without sacrificing comfort. Experience the health benefits of proper indoor air quality by installing an 8620W today.

• Works with Alexa for voice control (Alexa device sold separately).
• Aprilaire Programmable Wi-Fi thermostat
• Remote monitor and control capabilities with the Aprilaire Wi-Fi Thermostat App on IOS and Android
• Large 10.3 square-inch LCD touch-screen display
• Event-Based Air Cleaning and Humidity or Ventilation Control

User questions & answers

Question:	Can this unit use a location-based outside temp via wifi rather than the wired outdoor probe? (For relative humidity setting target
Answer:	No. This thermostat must use the provided outdoor temperature sensor to run the humidifier in automatic mode (changing the indoor humidity based on outdoor temp).
Question:	Has anyone else had an unreachable AprilAire server/been unable to adjust your temp through the app for the past few days
Answer:	Yes. Started 3-4 days ago. If I take the front of the thermostat off, put it back on and reboot my phone, it will allow me to connect one time. After that it won’t connect. Have not tried to reboot the modem.
Question:	I have an aprilaire 500 with an aprilaire 4655 humidistat i would like to replace both my thermostat and humidistat with this unit. is that possible
Answer:	Yes it has a terminal for humidity it will control both humidity and temperature.
Question:	Is there a way to keep the backlight on, continuously
Answer:	Option number 44 in the installer set-up menu will allow for a constant backlight. If you need assistance with this process, please call your installing contractor or our tech support team at 1-800-334-6011. Aprilaire Tech Support Team

Product description

Klein Tools Electrical Test Kit

• The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
• The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
• NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
• Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
• Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects

User questions & answers

Question:	What is the resistance measuring range
Answer:	Range is 0.200 Ohms up to 200 MegOhms, a very good range. Disregard the other answers to this same question, answers which are incorrect.
Question:	does it have a built in kick stand
Answer:	Yes, there is a built in kick stand on the back of the unit.
Question:	does it come with a case
Answer:	No, but there is a case that will work fairly well made by Klein.
Question:	Does this come with tester leads? Do you sell them separately
Answer:	Yes, this kit does include tester leads- HNS Tools

Product features

Electrical Test Kit

Klein Tools updated Electrical Test Kit contains MM300 (Manual-Ranging digital Multimeter), NCVT-1 (Non-Contact Voltage Tester) and the RT105 (Receptacle Tester). The NCVT-1 automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles.

Product description

Used to sense temperature if the thermostat is installed in a poor temperature sensing location.

• Factory calibrated, no field calibration needed
• Installation is quick and simple
• Operating Temperature Range; 35-114 Degrees
• Small remote sensor matches any room decor
• Includes 2 AAA alkaline batteries and mounting hardware

User questions & answers

Question:	What does an orange light mean after you insert batteries? The manual says nothing about this
Answer:	Connect to the battery than crank the car. Read the voltage drop. Now turn the knob on the carbon pile to match the voltage when you cranked the car. Read the amps that is what the starter is drawing. should be 150 to 200 amps
Question:	Does this sensor detect occupancy like the Ecobee and only uses the sensor for averaging when someone is present in the room that the sensor is in
Answer:	Yes it does have a 15 sec timer
Question:	Can the system be programmed to use the main stat during the day and the remote sensor at night; no averaging
Answer:	This product does have two fans that keep the temperature down.
Question:	How can you tell when the batteries need changing
Answer:	No, the readings are in volts. However, it could help determin if your starter is using too many amps. The test would be, put alligator clips of OTC on neg and Pos of battery. Disable ign. and crank engine over for 15 seconds with a helper, (Or use a remote starter switch) At the end of 15 seconds read the voltage, it should be no less than 9 volts. If voltage drops, charge battery and do test again to see if results the same. Either starter problem, (taking too much load?) or corroded battery terminals, or bad ground to engine or frame. Caution, do not operate load switch for this test. But before this test is carried out, charge battery, and just perform a load test on battery while still in veh. to verify if battery bad or ok. You can also check Alternator voltage output with this OTC unit. This is a great unit, I picked up a plastic hardshell case for storage. Remember this OTC does not show amps, It just puts a load on the battery ( which is current draw, amp load) Leaving headlights on would be the same thing, just that it would take longer because amp draw would be minimal. Hope this answers your question. The handbook explains it well.Thanks Alex T.

Product description

PRO1 specializes in the design and manufacturing of professional grade products that improve the comfort of a home and simplify the installation. All of our products are designed to accommodate the performance and reliability demands of professional heating and cooling technicians.



Heating and cooling accounts for almost half of our annual home energy consumption. You can personally reduce nearly 2,000 pounds of carbon emissions annually with a few simple adjustments. The American Council for an Energy Efficient Economy has more tips for saving energy on heating and cooling.

• Single stage
• 1 heat 1 cool
• Non-programmable
• Battery powered or hardwired, Easy access battery compartment.
• 4 sq. inch display with blue backlighting,Please refer user manual attached below for instructions and troubleshooting steps

User questions & answers

Question:	It is not turning on. Suggestions
Answer:	You should be able to trace wiring that is not in a shielded metal conduit. I submit however, that your outlets are not wired in series, they are in parallel and perhaps daisy chained, but they will not be in series, nothing will work if they are. Remember the old Christmas tree lights that if one was bad or missing they all went out? That was series wiring.
Question:	My thermostat has some star shape symbol, does anyone know what it means
Answer:	The CT80 does not have a specific test for a bootleg ground. It does measure impedance in the neutral and ground legs so you could reasonably suspect a bootleg ground if the impedance of ground and neutral are similar. No guarantee of that so additional testing or circuit tracing may be needed.
Question:	How do you wire it with just two leads
Answer:	Unfortunately it can't. The CB 10 used to locate breakers from a energized outlet. The device needed to find a open, or deenergized circuit will have a tone generator built in, these are more commonly called wire tracers.They are a little more expensive but well worth the cost.
Question:	How do you switch the 5mim delay to no delay
Answer:	No, the knob does not automatically back off.

Product description

• Measures pH, temperature and (tds) EC, ppm 500, ppm 700 and CF with lab quality glass that can be used for the pool, drinking water, hydroponics, brewing, and growing
• EASY two point calibration and auto temperature compensation makes this digital meter a handy tool with backlit LCD display and calibration reminders
• Quickly monitor your nutrient level to maximize your grow and ensure plants get the balanced feed they need
• Other features: auto off function, low battery indicator, units for temperature; KIT INCLUDES: AAA batteries and calibration solution; Works with Bluelab Leap pH Probe for direct media measurements
• Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment; 5 Year Limited Warranty with proof of purchase

User questions & answers

Question:	can the probes stay completely submerged inside the reservoir at all times
Answer:	Yes. The pH meter testers have been updated in many aspects, including increase to 6 packs of 3 types of calibration powders and the pH tester and powders are packed in a plastic case which is also packed in a customized hard carton box as pictures shows. If not have these characteristic, the function and quality can't be guaranteed.
Question:	Will Bluelab honor warranty on units purchased on Amazon.com
Answer:	Yes.
Question:	How is this meter for plant germination different from the other meter shown
Answer:	No, the pH tester could not be pre-calibrated. But it comes with 6 pH buffer powders(2*4.0;2*6.86;2*9.18) to calibrate it, very quick and easy. You don't need to calibrate the tester before each use, only use one-third of any 1 pcs of 6 buffer powders to calibrate it once in a while.
Question:	Is this combo meter for soil use
Answer:	Get some PH storage solution, cheap enough (BRS?), and I cut a piece of a sponge and placed it on the cap. Fill w/ solution every now and then if you use it, if not, leave it upright, so the probe is in the solution. It doesn't have to swim in it, just be in the sponge full of solution.

Product features

Get the fundamentals of growing right, every time

A double-junction pH probe comes standard with the Bluelab Combo Meter. Unlike standard glass bulbs, the double-junction probe reduces build up on the probe for consistent readings and to increase lifespan.

New Zealand-made quality, built for growers

Our products are designed and built with growers, for growers - so you can relax knowing that your meter is robust and user-friendly, allowing you to get on with the tasks of everyday growing. The Bluelab Combo Meter was designed and built in New Zealand.

Easy calibration for pH

Get rid of the headache of pH calibration with our simple two-point calibration process. Remember to calibrate your meter's pH probe before first use. The pH probe comes with a 30-day calibration indicator that can be easily viewed on your meter's screen. You do not need to calibrate for conductivity or temperature.

Fast and accurate readings

When taking a measurement, simply place your probe into the solution and the selected reading will be displayed on screen. As the Bluelab Combo Meter is portable and does not require a power supply to operate, you can get quick and accurate readings anytime and anywhere.

Superior design and manufacturing

All Bluelab products are proudly designed and manufactured in New Zealand. The design focuses on ergonomic qualities to assist with regular use in varying grow environments. Our rigorous production process includes each meter being inspected by hand before it finds its way to you!

The Bluelab promise

The Bluelab Combo Meter comes with reputable support. This means that you can have complete peace of mind when you invest in the Bluelab Combo Meter.

Bluelab: Trusted by growers like you for over 30 years

For over 30 years, Bluelab has been providing award-winning and innovative technology that helps growers unlock their plants' full potential. At Bluelab, we believe that our commitment to designing hardy, purpose-built products and creating strong educational programs will help elevate the standard of growing. Together with our growers, we will create a world with fewer pesticides, food miles and less water usage. Let Bluelab’s products take your growing to the next level.

• Kindly NOTE: This soil tester can not be applied to test pH value of any other liquid. If the soil is too dry the indicator will not move, and water it before testing.
• 3-IN-1 FUNCTION: Test soil moisture, pH value and sunlight level of plant with our soil meter, helps you specialize in grasping when you need to water your plant.
• ACCURATE & RELIABLE: Double-needle Detection Technology strongly enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity.
• EASY TO USE: No batteries needed, just insert the sensor probe into the soil about 2-4 inches, toggle switch to test moisture, pH, sunlight you would like to measure.
• INDOOR & OUTDOOR USE: Design to be lightweight and portable, easy to carry around for outdoor use, ideal soil test tool kit for home plants, garden, lawn and farm.

User questions & answers

Question:	Does the light meter measure light over the course of an entire day? Or is it more an instant light measure
Answer:	No, just the smallest one.
Question:	Will this work in coco
Answer:	Only the small level is magnetic.
Question:	Do I have to wait 10 minutes between readings if I’m just measuring soil moisture
Answer:	One Horizontal (level) and Two Vertical (plumb) Vials
Question:	Can the metal rods be taken off and used as a bolt in a crossbow
Answer:	Yes , and it actually fits 4 levels, the fourth is the 3’ which is not a part of this package

Product features

Let Sonkir MS02 Soil pH Tester Make You Become a Good Plant Carer !

3-IN-1 Design

This 3-in-1 soil moisture meter is designed to better know the condition of your plant, detect soil moisture, help you know the pH value of the soil, determine if plants get enough sunlight to keep plants grow healthier !

Scientific Data Monitoring

Help you control every detail and track all changes about your plants. Keep your plants in a healthy condition through scientific data monitoring !

Special Reminder:

1. The pH function of this soil tester can not be applied to test pH value of any other liquid.

2. Since soil most often is in/close to neutral state (with pH value of 7), it is highly likely that you find the needle in display window stay still (because the default pH value is set at somewhere between 7 and 8) when you use it to test the pH value of soil. Customers sometimes are misled by this appearance and hence regard the tester as a defective unit by mistake.

How to Use:

Step 1: Switch to moisture/pH/light position according to demand.

Step 2: Insert the probe into the soil about 2-4 inches.

Step 3: Check moisture/pH/light level in the dial after 10 minutes.

Step 4: Remove probe from soil and wipe clean after each use.

Kindly Note:

1. Do not force it into very hard soil or touch hard objects since it will be easy to damage the probe.

2. Do not use it to test pure water or other liquids. It can only be used to measure soil.

3. Do not leave the meter in the soil for a long time.

4. Please wipe and clean the probe after each use.

5. If the soil is too dry the indicator will not move, and water it before testing.

Test Soil Moisture

Help you specialize in grasping when you need to water your plant.

Test the pH of the Soil

Help you to control the pH value in the soil.

Test Sunshine Level

Know about whether it gets adequate sunlight.

Outdoor Plants

Indoor Plants

Vegetable Garden

Product description

The testo 310 residential combustion analyzer sets a new standard in reliable and accurate combustion analysis with its simple design, rugged housing, and advanced sensor technology. With five different fuels to select from, it provides the flexibility you need for applications like checking furnace efficiency, boiler tuning, and safety checks.

• Wireless printer with integrated magnets for professional jobsite documentation
• All the measurements you need, including draft and pressure
• Fast 30-second startup so you can get testing quickly

User questions & answers

Question:	Does this Testo come with a calibration certificate
Answer:	No, China
Question:	sirve para medir tiraje de chimenea
Answer:	In answer to the question, the CB10 can not be used to trace a wire behind walls. There are instruments out there that are designed specifically to trace the location of hidden wires but are extremely expensive.

Product features

Precise and professional residential combustion measurements every time with the testo 310

The fully-featured testo 310 completes your residential combustion tuning and safety checks or new combustion unit installations with ease. With its 10 hour battery and five different fuel types (natural gas, propane, fuel oil 2, biomass 5%, and wood 20%) to select from, it provides the flexibility you need for a wide variety of applications including checking furnace efficiency, boiler tuning, and water heater checks.

Productive and Professional

The testo 310 is ready to test in just 30 seconds. The bight, backlit 5-line display shows more measurements to gives you a complete picture of the task at hand while the rechargeable lithium battery allows for all day operation. Print professional documentation on the job site with the wireless printer

Kink-Resistant Hose

The kink-resistant hose is integrated into the rugged housing to eliminate leaks.

Hands-Free Readings

The powerful magnets on the testo 310's rugged housing allow for hands-free operation.

Wireless Printer

The wireless printer with integrated magnets provides additional convenience of being able to professionally complete all job documentation right there on site

Complete Kit

Your testo 310 combustion analyzer comes with an IR printer (0554 3100), thermal paper rolls , battery, sensors, probe with cone, hose, silicon tubing (for pressure), extra particulate filters , AC power supply (USB), pressure plugs , calibration certificate, and protective case.