11 best fluke infrared thermometer

Product description

IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. Temperature range 62 Max 22 to 932 Max 22 to 1202. Adjustable emissivity. High and low alarms. Dimension 6.8 x 3.3 x 2.9 in.

• Note: This product is for industrial use only. It is not for human use
• Infrared thermometer for non-contact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systems
• Measures temperature from 30 to +500 degrees C (-22 to +932 degrees F) with an accuracy of + or 1.5 degree C or + or 1.5 percent of the reading from 0 to 500 degrees C
• 10:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area
• Displays the minimum, the maximum, the difference between the two temperatures, and the average temperatures
• Certified IP54 for protection against dust and splashing liquid
• Small and lightweight making it easy to clip to your tool belt or belt loop

User questions & answers

Question:	I have figured how to set most everything but does anyone know what "tr i9" refers to for item #7 in the manual? Fluke is not much on words
Answer:	It’s very good for my skin
Question:	i cant decide on this or the 62 max - any words of wisdom
Answer:	It does have a smell not sure I would call it sour.
Question:	Does this unit adjust for emissivity
Answer:	It added moisture and worked on lightening dark spots on my face.
Question:	Is this made in the USA
Answer:	The origin is not stated on the label. It states "Packaged in th USA". It is certified organic and verified non-gmo.

Product features

Fluke 62 MAX Infrared Thermometer

Everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard-to-reach areas for repair and maintenance.

Fluke has built this small and easy-to-use infrared thermometer with the durability and accuracy you need to do your job—all within your budget. These IR thermometers offer precise laser technology for accurate and repeatable measurements.

Electrical

-Electrical panels.

-Wiring and cables.

-Ballasts and bus bars.

-Electrical outlet boxes.

-Oil-filled transformers.

Mechanical

-Motor rise over ambient.

-Hydraulics.

-Gears.

-Shaft alignment.

-Bearings.

HVAC

-Duct leakage.

-Supply/return register.

-Air balance/ stratification.

-Liquid flow through pipes.

-Insulation.

-Blower motors.

-Roofs.

Predictive Maintenance, Hazardous Locations and Process

-Condition Monitoring Trending.

-Mold temperature.

-Oven insulation.

-Pulp and paper machinery.

-Refineries and petrochemical.

-Product temperature (e.g. food).

Product description

The Fluke 59 Series Infrared Thermometer is designed to provide precise laser technology for more accurate and repeatable measurements. It has a large, easy to read backlit LCD display for easy viewing. It is small and lightweight design fits easily fits into your tool box. It displays the minimum, maximum or average temperature, or the difference between two measurements. It has Hi and Lo alarms for rapid display of measurements outside the limits. It is powered by one AA battery, and comes with a one year warranty.

• Precise laser technology for more accurate measurements
• Large, easy to read backlit LCD display for easy viewing
• Small and lightweight design fits easily fits into your tool box
• Temperature range: 30 degree C to 500 degree C ( 22 degree F to 932 degree F)
• Used only for industrial purpose (for monitoring electrical, mechanical, HVAC, and automotive systems) and not for health care purpose
• 10:1 distance to spot ratio
• IP40 rated for extra protection against airborne contaminants

User questions & answers

Question:	Can this sensor be used to determine the accurate temperature in an oven
Answer:	Hi this oil do not have a smell at all. If you want the rose smell you have to buy the real rose oil it has that smell but it’s expensive
Question:	Why does fluke say 59 Max+ goes to 350C, and your info says 500C
Answer:	The bottle does not have a dropper, but you can easily remove the seal to pour the oil out faster. A dropper would be helpful though because this oil does come out slowly.
Question:	Temperature range is missing from the product description
Answer:	I think this product is only for aromatic and therapeutic purposes.
Question:	What is the accuracy
Answer:	I’m not sure if this oil is organic or cold pressed. It actually doesn’t say on the bottle.

Product features

59 MAX Infrared Thermometer

The Fluke 59 MAX Infrared Thermometer delivers a precision thermometer that delivers accurate responsive measurements and fits within your budget. It features an 8:1 distance to spot ratio and precise single laser targeting for accurate and repeatable measurements. Use the Fluke 59 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, and vents. It is extremely easy to use and compact enough to fit in your hand and your tool bag.

Product description

The Fluke 561 infrared thermometer is easy to use: just aim, pull the trigger, and read the display. The large backlit display shows the temperature readings in °F or °C, and has a low battery indicator. The thermometer has a unique emissivity selector, which allows you to select from three preset settings. This feature makes it easy to choose the correct emissivity setting for a given application. Other features include Min/Max, scan/hold, display hold, temperature differential, Type K thermocouple input, and dual temperature readout. The meter comes standard with a pipe wrap probe ideal for use in HVAC applications; however, any Type K probe with a mini connector can be used. Available for sale in the United States and Canada only. Designed for the HVAC market, with features that can be used in any IR application Single point laser targets the measurement area. Unique emissivity selector makes it easy for anyone to use. Advanced Superheat feature calculates temperature differential.

• Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments
• Measures temperature from 40 to +550 degrees C ( 40 to +1022 degrees F) with an accuracy of + or 1 degree C (+ or 2 degrees F) for the infrared sensor and an accuracy of + or 2 degrees C (+ or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input
• 12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area
• Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F)
• CE mark indicates compliance with applicable EU directives

User questions & answers

Question:	can this product detect heat loss thru concrete
Answer:	This is the most confusing part of the manual (since its all pictograms w/o any text describing it). What the trig setting (on or off) does: If set to "on" then the unit will, if the trigger is held in for 10+ minutes, shut off after 10 minutes. No effect on normal usage. The normal operation is press trigger, let go, read the display... 5-6 seconds later the unit shuts off. But if you toss it in your tool bag, pocket, etc and happen to depress the trigger and it stays that way, it will shut off after 10 minutes - to save battery life. I'd have like to seen a configurable time, or a smaller time - 10 minutes seems excessive. Anything over a minute seems excessive to me.
Question:	I lost the wire attachment from my gun; can I still get an accurate room temperature reading without using the wire probe or laser sight
Answer:	Fluke's web site shows that the Max+ is better in every respect except battery life with laser and backlight on (10 vs. 8 hours) but Amazon inverted the prices today so there's no trade-off to make:Top-end: 500 versus 650 °CAccuracy above 0 °C: greater of ±1.5 °C or ±1.5% versus greater of ±1.0 °C or ±1.0%Response Time: Optical Resolution: 10:1 versus 12:1Repeatability: greater of ±0.8% of reading or For my uses measuring attic temperatures, fry pans, fuse boxes, computer chips, hard drives and compact florescent bulb ballasts that seem to get hot before failing, either model would be fine. I hope that getting a Fluke means that this will tolerate static electricity and drops better and maintain accuracy as the battery wears down or the sensor ages so the specs actually mean something.
Question:	does this unit come with a case? hard plastic or pouch
Answer:	According to the manufacture's website the Max Plus can be manually adjusted for emissivity in a range from 0.1 to 1.00
Question:	Where's the country of origin
Answer:	In the battery compartment of my Fluke 62 MAX+, it states that the unit was made in China in June 2012. Hope this helps.

Product features

Fluke 561 Series Thermometers

With Fluke infrared thermometer, you can also take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to-reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections, and wires. Plus, scan ducts, and other hard-to-reach objects from the floor-leave your ladder in the truck.

With a rugged, easy-to-use, ergonomic design, the two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, mechanical, and HVAC environments. These tools go beyond other IR thermometers helping you work more efficiently in more applications.

Benefits of the 561 HVAC Thermometer

Lighten up your toolbox. The Fluke 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. It’s fast, efficient, and easy to use, saving you valuable time and effort.

Product description

The Fluke 67 MAX Clinical Infrared Thermometer is a handheld non-contact thermometer optimized for measuring human temperature. The Fluke 67 MAX is accurate within +/- 0.5 °F over a measurement range of 71.6 °F to 109 °F (+/- 0.3 °C accuracy within a range from 22 °C to 43 °C). The Fluke 67 MAX has a built-in Body Mode, which adds an offset to account for the difference between surface skin temperature and core body temperature. The SCAN functionality allows the user to scan the forehead for the highest temperature to improve measurement repeatability, when compared to a single spot temperature measurement. This permits convenient forehead scans within seconds. The Fluke 67 MAX also has a fixed emissivity setting of 0.98, which is widely accepted as the most accurate setting for measuring human skin temperature. The Fluke 67 MAX has been tested to IEC standard 60601-1-2 for electromagnetic compatibility. This tool has been tested to remain accurate when near other electronic devices such as portable RF communication equipment (two-way radios). The Fluke 67 MAX, with its small size and versatile features, is extremely easy to use. Plus, it’s rugged enough to take a 2-meter drop. You can also easily clean the surface of the Fluke 67 MAX with disinfecting wipes.

• ACCURACY: Within +/- 0.5 °F over a measurement range of 71.6°F to 109 °F (+/- 0.3 °C accuracy within range from 22 °C to 43 °C).
• BODY MODE: Adds an offset to account for the difference between surface skin temperature and core body temperature.
• SCAN FUNCTION: Allows the user to scan the forehead for the highest temperature to improve measurement repeatability, when compared to a single spot temperature measurement. This permits convenient forehead scans within seconds. For best results hold trigger for 2-3 seconds.
• EMC PERFORMANCE: Tested and passed accuracy in the presence of 2-way radios and other EM waves (Tested to IEC standard 60601-1-2 for electromagnetic compatibility)
• EMISSIVITY SETTING: 0.98 which is widely accepted as the most accurate setting for measuring human skin temperature.
• NOTE: The Fluke 67 MAX accuracy complies with and accuracy tested in accordance with ASTM E1965-98 and ISO 80601-2-56 standard but is not FDA 510(k) cleared or approved. Learn more from American Society for Testing and Materials (ASTM.org) and International Organization for Standardization (ISO.org).

User questions & answers

Question:	Where are they made
Answer:	No
Question:	Is the fluke 67 max/am made or assembled in the usa
Answer:	I find that they are not that reliable. I get different temperatures on hard stable surfaces just my pointing away and pointing it back. Also I have compared my handheld with 2 others and none of them read the same. Can be as much as 1 degree different. Not sure which ones are wrong and which one is correct.
Question:	Is this operable at a wide range of outdoor temperatures
Answer:	IR thermometers measure surface temperature. If the heat loss under the concrete causes the surface to be cooler, the 561 can measure that, but it won't measure the temperature through the concrete.
Question:	Wanted to use outside in early morning cold temperatures to monitor employee temperature levels can it function in cold temperatures
Answer:	The laser site has nothing to do with accuracy, it just shows you the area where the average reading is coming from. IR thermometers read surface temperature so they are not the best choice for room air temperature. The Fluke replacement sensor (Velcro pipe surface type) is model Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe, any type K sensor with a mini connector will work for you

Product features

Fluke 67 MAX Clinical Infrared Thermometer

The Fluke 67 MAX is a clinical non-contact infrared thermometer intended to measure and monitor human body temperature. The device is intended for use on adults in both healthcare and non-healthcare settings. The measurement should not be solely or primarily relied upon to diagnose or exclude a diagnosis of any disease. The Fluke 67 MAX is accurate within +/- 0.5 °F over a measurement range of 71.6 °F to 109 °F (± 0.3 °C from 22 °C to 43 °C).

Built in BODY mode

The Fluke 67 MAX has a built-in Body Mode, which adds an offset to account for the difference between surface skin temperature and core body temperature.

Reliable SCAN Functionality

The SCAN functionality allows the user to scan the forehead for the highest temperature to improve measurement repeatability, when compared to a single spot temperature measurement.

For best results hold trigger for 2-3 seconds.

Tested for electromagnetic compatibility

The Fluke 67 MAX has been tested to IEC standard 60601-1-2 for electromagnetic compatibility. This tool has been tested to remain accurate when near other electronic devices such as portable RF communication equipment (two-way radios).

Emissivity setting

The Fluke 67 MAX also has a fixed emissivity setting of 0.98, which is widely accepted as the most accurate setting for measuring human skin temperature.

Product description

The Fluke 64 max IR thermometer has the precision you need to do your job accurately and is within your budget. Designed and tested to survive a 3 meter drop, you can count on this lightweight, compact Infrared thermometer to work when you need it to work even in the harshest environment.

User questions & answers

Question:	Does this work well for measuring the temperature if GPU's
Answer:	Yes, Each Fluke 561 includes:K-type thermocouple Velcro pipe probe, Durable hard case, 2 AA batteries, User's manual, 2-year warranty
Question:	Funciona para personas
Answer:	The Fluke-561 originates from China.
Question:	can this be use in getting human body temperature
Answer:	Yes:Features:Precise laser technology for more accurate and repeatable measurementsLarge, easy-to-read backlit LCD display for easy viewingSmall and lightweight design fits easily fits into your tool box8:1 distance to spot ratioIP40 rated for extra protectionDisplays the minimum, maximum or average temperature, or the difference between two measurementsHi and Lo alarms for rapid display of measurements outside the limitsPowered by one (1) AA batteryOne year warranty

Product features

Fluke 64 MAX IR Thermometer

The Fluke 64 MAX thermometer has the precision you need to do your job accurately and will not break the budget. Designed and tested to survive a 3 meter drop, you can count on this lightweight, compact infrared thermometer to work when you need it to work – even in the harshest environments and when you're not able to be there.

Equipment maintenance

Check moving parts and housings in motors and gear boxes for hot spots. Temperature change can indicate developing problems in many types of equipment, from ovens and boilers to freezers. Routine temperature audits of generators and their bearings can prevent expensive repairs. Scanning bearing temperatures with an infrared thermometer allows the maintenance engineer to detect hot spots and schedule repairs or replacements before the problem leads to an equipment failure.

Electrical maintenance

Use an IR thermometer to inspect supply power connections and circuit breakers (or fuses) for equal temperatures. An IR thermometer is effective in determining the source of the problem when a thermal overload protection device does not work and the motor shuts down.

Because electrical currents generate heat, temperature monitoring is an efficient way to predict potential equipment failure.

Building controls

Monitor HVAC/R components for quick energy audits and room balancing in a short time. An IR thermometer with a 20:1 distance-to-spot ratio makes elevated vents and returns more accessible.

For example, if a thermometer has a 10:1 distance to spot ratio, one can stand 10 inches away from the target and measure the temperature of a one-inch circle. At 10 feet away from the target, the measurement spot will be a one-foot circle.

Product description

Two-in-one IR and contact thermometers with an innovative dot matrix display. With a simple, 3-button on-screen menu interface (in 6 languages) the digital laser thermometers make even complex measurements easy. Quickly navigate advanced features to adjust emissivity, start data logging, or turn on and off alarms - with just a few pushes of a button. With a rugged, easy-to-use, ergonomic design, the two-in-one contact and non contact thermometers can stand up tough industrial, electrical, and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), helping you work more efficiently in more applications. Added functionality available only on the 568: Easily trend and analyze data with included Fluke View Forms software Quickly download stored data with USB connection See your data right away without leaving the site, using the USB and your laptop Extend your battery life by powering the digital thermometer from your laptop via the USB Features and benefits: Measure -40°C to 800°C /-40°F to 1472°F Easily access advanced features with the soft-key buttons and dot-matrix display Measure smaller objects from further away, with a distance-to-spot ratio of 50: 1 Compatibility with all standard mini-connector Type-K thermocouples allow you to preserve your thermocouple investments Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built-in material table Capture multiple points of data up to 99, for downloading and recalling later Easily adapt to lighting conditions with 2 levels of backlight Audible and visual alarms instantly alert you to measurements outside of your set limits Quickly identify problems with the MIN, MAX, AVG, and DIF functions Make contact thermometer measurements right away with the included Type-K thermocouple bead probe Confidently troubleshoot equipment with 1 % measurement accuracy Versatile interface with 6 languages from which to choose.

• Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in electrical maintenance and monitoring industrial and manufacturing processes
• Measures temperature with the infrared sensor from -40 to +800 degrees C (-40 to +1472 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F)
• Measures temperature with the included Type K bead thermocouple from -40 to +260 degrees C (-40 to +500 degrees F)
• 50:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area
• Stores up to 99 points of data for analysis and monitoring on a computer

User questions & answers

Question:	Can this device be used to measure human body temperature
Answer:	59 °F to 104 °F (15 °C to 40 °C)
Question:	Would like to know whether calibration certificate is inclusive or not
Answer:	The 67 MAX is designed to operate from 59 F to 104 F (15 C to 40 C). While it is possible to use the product outdoors within its specified operating range, it is important to note that ambient outdoor temperatures can affect skin temperature. For best results, it is recommended that the product be used inside within its specified operating range.
Question:	which is a better fit for professional home inspectors, 561, 566 or
Answer:	The 67 MAX is designed to operate from 59 F to 104 F (15 C to 40 C), and the product will show “Hot” or “Cold” on the display if it is outside of this range. While using the product outside within its specified operating range is possible, it should be noted that ambient outdoor temperature can have an influence on skin temperature, whether the temperature is hot or cold. Other factors that may also affect the temperature reading include hats/beanies, hair, and exercise before screening. It is recommended that the product be used indoors within its specified operating temperature range for best results.
Question:	Will this unit measure the temperature on shiny metal? I am looking to measure press decks and steel molds in the rubber molding industry
Answer:	Yes, as long as you have line of sight to the area you want to measure.

Product features

Fluke 568 Series Thermometers

With Fluke infrared thermometer, you can also take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to-reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections, and wires. Plus, scan ducts, and other hard-to-reach objects from the floor-leave your ladder in the truck.

With a rugged, easy-to-use, ergonomic design, the two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, mechanical, and HVAC environments. These tools go beyond other IR thermometers helping you work more efficiently in more applications.

Fluke 568 Ease Of Use

With a simple, 3-button on-screen menu interface (in 6 languages) the Fluke 568 digital laser thermometer makes even complex measurements easy. Quickly navigate advanced features to adjust emissivity, start data logging, or turn on and off alarms - with just a few pushes of a button.

Product description

Features:

Temperature range from -18 to 275°C

Accuracy: ±2% or ±2°C of reading

Distance-to-Spot: 8:1 @ 90% energy

Repeatability: ±1% or ±1°C of reading

Single point laser sighting

Holds temperature readings for 7 seconds

Backlit display for poorly lit areas

Specifications:

Measurement Range:-18°C to 275°C (0°F to 525°F)

Accuracy:

100°C - 275°C (212°F to 515°F):±2% of reading

0°C - 100°C (32°F to 212°F):±2°C(3.5°F) of reading

Below 0°F (32°F):±3°C(5.5°F) of reading

Repeatability: ±1% of reading or ±1°C whichever is greater

Emissivity:Pre-set 0.95

Distance-to-Spot size:8:1 calculated @ 90% energy

Response time:< 500ms

Display resolution:0.2°C (0.5°F)

Spectral range:6.5- 18 um Thermopile detector

Display hold 7 seconds:Yes

LCD backlight:Yes

Temperature display: °C or °F selectable

Low battery indicator:Yes

Ambient operating range:0°C - 50°C (32°F to 120°F)

Relative humidity:10% - 90% RH non-condensing @ up to 30°C(86°F)

Storage temperature:-20°C - 65°C(-4°F to 150°F) without battery

Power:9V battery included

Battery life: 4 hours

Weight:200g, with battery

Dimensions (H x L x W):152mm x 102mm x 38mm

Standards:

Conforms to EN 61326-1 Electromagnetic

Emissions and Susceptibility

EN 61010-1 General Safety

EN 60825-1 Laser Safety

Certification:CE, CMC

• The lead time is about 3 days. FedEx shipping time to USA is about 5-7 days.
• If any questions, please contact us via message.

User questions & answers

Question:	Does it come with battery
Answer:	1. We don’t recommend any Fluke IR thermometers or thermal imagers for human body temperature measurements or medical screening.
Question:	Is this thermometer shows temperature in Fahrenheit
Answer:	We don't recommend our thermometers for human temperature measurements. The accuracy of this model is ± 1.0 °C or ± 1.0 % of reading, whichever is greater. This is not accurate enough to detect small variations.
Question:	Where is it made
Answer:	nope

Product description

The Fluke Digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type t, or Type E thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40 inch. Operating temperature: -10°C to 50°C.

• Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications
• Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe
• Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F)
• Provides the relative time of minimum, maximum, and average temperature measurements for monitoring
• Conforms to NIST standards for compliance with regulations

User questions & answers

Question:	Can i leave the probe inside my gas fired forge and read the temp for determining heat treat temps on various steels? pretty much twice a week or more
Answer:	Since soil most often is in/close to neutral state (with pH value of 7), it is highly likely that you find the needle in display window stay still (because the default pH value is set at somewhere between 7 and 8) when you use it to test the pH value of soil. Sometimes are misled by this appearance and hence regard the tester as a defective unit by mistake.
Question:	Are these manufactured in the usa? usually if so, the ad will make a big deal of the fact. this one didn't
Answer:	That's strange.. I recieved mine a while back.. I don't test tje same spot.. I usually test different spots in the pot.. I always get get good readings.. I tested it by putting the meter in a damp pot then test on a really dry pot.. And it will tell you that pot needs water.. It worked for me.. Hope this helped.. Good luck.
Question:	Does this come with the magenetic hanger strap
Answer:	Hi! I have a moisture meter and its saving me from over watering which I am prone to do. Some plants like to be moist and some are drought resistant and can tolerate a lack of water and others like flowers need to be water more often because they wither quickly. if you have soil that is a mixture of clay then the clay will hold moisture and the plant won't need water as often. You can go on line and there is a wealth of information including how to water and care for any plant you have. I also sent a soil sample off to the North Carolina Dept of Agriculture so they could tell me about fertilizer. Good luck. Its all on line.
Question:	When it list with nist certification. is that only for the instrument or is the thermocouple also nist certified
Answer:	The sensor meter has numbers 1 through 10 - 1 dry - 10 wet. On the watering guide on the back of the box, it gives a list of zones for Dry-Moist-Wet. Under each zone, it gives a list of plants that are in that zone. You use the meter to check the moisture, then see what zone your plant is in. You will know if you need to water or not according to what zone your plant is in.
Question:	Does this have magnet in the back
Answer:	You can use it to measure moisture in the ground or pots, etc. It has a 7" probe which allows measuring moisture in large pots. Sticking your finger in the ground (my index finger is only about 2 2/5" long) will only measure surface dryness , while there may be quite a bit of moisture deeper. Don't over-water based on lack of surface moisture. My desert plants (Yuma AZ) are sensitive to over-watering. Measure the moisture in the root area, I highly recommend this handy instrument.

Product features

Fluke 52 II Single Input Digital Thermometer

The Fluke 52 II contact thermometer offers fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged, handheld test tool. Take contact temperature for checking motors, insulation, breakers, pipes, corroded connections, liquids, and wires with industrial standard J, K, T, E, N, R, and S type thermocouple (temperature sensors).

Product description

62 MAX Mini Infrared Thermometer Specifications- Temperature range-30°C to 500°C (-22°F to 932°F) Physical Specifications Weight255 g (8.99 oz) Size175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in) Dust and water-resistant: Ip54 rated for dust and water resistance. Rugged: 3-meter (9.8-foot) drop tested. Ergonomically designed: Completely redesigned for a more natural hand fit. Small and lightweight Clips to your tool belt or belt loop or easily fits into your tool box. Large, backlit display: Large screen makes data easier to read, even in dark areas.

• INFRARED THERMOMETER, INFRARED GUN

Product description

• Multi-language interface (user select)
• Current Temperature plus MAX, MIN, DIF, AVG temperature displays
• Adjustable emissivity and predefined emissivity table
• Infrared and thermocouple temperature on backlit display
• High and low temperature alarm

User questions & answers

Question:	Can this device be used for penetrating acrylic or lexan plastic to get to metal to take temperature
Answer:	Batteries not included
Question:	Does it come with the Calibration Certificate
Answer:	Yes. Celsius and Fahrenheit.
Question:	Where is it make
Answer:	Says Malaysia on the box
Question:	Can i use this for my ps4 system that overheat easily
Answer:	The Country of Origin is Malaysia

Product description

Fluke 324 True RMS Clamp Meter

The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs. The Fluke 323 323 AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.



Fluke 62 Max Infrared Thermometer (Not for human temp), -22 to +932 Degree F Range

IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. Temperature range 62 Max 22 to 932 Max 22 to 1202. Adjustable emissivity. High and low alarms. Dimension 6.8 x 3.3 x 2.9 in.

• Product 1: Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
• Product 1: True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
• Product 1: Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
• Product 1: Audible continuity sensor confirms that the circuit conducts electricity
• Product 2: Note: This product is for industrial use only. It is not for human use
• Product 2: Infrared thermometer for non-contact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systems
• Product 2: Measures temperature from 30 to +500 degrees C (-22 to +932 degrees F) with an accuracy of + or 1.5 degree C or + or 1.5 percent of the reading from 0 to 500 degrees C
• Product 2: 10:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area

User questions & answers

Question:	Does the meter come with a magnet on the back ? If not, how can I have the meter stay on a metal surface instead holding the meter with my hand
Answer:	Should be pre-calibrated to 7 (neutral). Since most soil is neutral, you may not see the needle move much, even after ten minutes. It will take at least ten minutes to give you an accurate reading, at any rate. If you add egg shells (to make it more alkaline) or coffee grounds (to make it more acidic) and wait another ten minutes, you should see a slight change. Try a sample of 50% soil to 50% coffee grounds to see if you can get a more extreme response. The soil tester is gardening hand tools.
Question:	Can the temp prob be calibrated by the owner? Can it read negative numbers? i.e. Freezer temps
Answer:	Not. The soil tester can only be used to test the light, humidity and pH value of the soil. If you want to test the pH value of the liquid, you can use the PH meter, such as this one in our shop: https://www.amazon.com/dp/ B08RMXX8WJ can be used to test water.
Question:	How is the temperature taken? Contact or infrared
Answer:	It has a range of soil moisture from 1 to 10 (1-3 Dry, 4-7 Nor, 8-10 Wet) on the scale dial of the meter, If the plant is very dry, the soil gauge pointer will not swing ! This means your plant may need water.
Question:	Does the Fluke 324 measure DC Amps via the clamp
Answer:	You can try the following ways: 1.Use a toothbrush and a little vinegar to slowly wipe the rust. Basically, the rust can be cleaned. 2.Carefully wipe the rust with wax. 3.First remove the rust with toothpaste. The toothpaste contains sulphur and friction agent, which can replace the oxygen in the rust component. Then apply a white candle on the rust. After about 3 to 5 minutes, wipe it off with paper. After removing the rust, be sure to treat the surface, apply a layer of lead, and then paint; or plate other metals that are not easily rusted.