12 best dial test indicator sets

Product description

Measuring force: 0.3N or less. It is Jeweled bearing type and Compact, Length: 18.7mm. Full Set includes Indicator, Spanner (part number 301336), 3/8" Diameter Stem (part number 102081) and .079" Diameter Carbide Contact Point, as well as .039" Diameter Carbide Contact Point and .118" Diameter Carbide Contact Point, .157" Diameter Stem (part number 102036), .315" Diameter Holding Rod (part number 900211), 4" Length Holding Bar and Swivel Clamp for .157" Diameter, 3/8" Diameter, Dovetail (part number 900322).

• Jeweled bearings assure higher sensitivity and accuracy. reversible measuring direction
• Two holding bars are supplied (full sets only)
• Fully adjustable bezel/dial face
• Contact point is adjustable within 220 degree
• Bezel is sealed with on o-ring to keep out water/oil

User questions & answers

Question:	what is the thread for the tip? M
Answer:	The thread measures 1.65mm od of thread X .337 mm pitch
Question:	you have it in metric unit
Answer:	The metric unit is a different part number. I'd advise since there a few different models with different specs go to mitutoyo usa and download the catalogue to see which is right for you.
Question:	Does it come with a case
Answer:	Yes, a cheap plastic one
Question:	What are the dimensions of the rectangular attachment (second from the right in the first image
Answer:	.245 x .493 x 3.945. mine is anyway

Product description

This is a magnetic base, dial indicator and 22 piece anvil point set . Features: TEST INDICATOR 1) Body is made of machined anodized aluminum and NOT plastic 2) Vertical lug back configuration 3) 1 inch of total travel with graduations in 0.0005 (that's half a thousandth) per line 4) Accuracy guaranteed to 0.001 per 1 inch of travel 5) Each indicator comes with inspection certificate 6) Spindle rack pinions and gear trains are made of high quality steel components ensuring long life 7) Does not come with plastic case, MAGNETIC BASE 1) Base weighs 3 pounds has a built-in super strong magnet with 176 pounds (80 Kg) of holding power 2) Magnet has an On/Off switch which easily and quickly engages / releases magnet 3) Base has V-groove on bottom for mounting on cylindrical surfaces 4) Fully adjustable chrome plated two-arm design 5) Precision fine adjustment knob for precise positioning 6) Accepts nearly all AGD dial and test indicator mounts 7) Overall height 9 inches 8) The vertical arm extends 7 inches from the base. The cross arm is 6 inches in length 9) Does not come with plastic case. 22 ANVIL POINT SET 1) Will fit most American and import indicators. 2) Tips have 4-48 threads. 3) 22 piecs set comes in protective plastic storage case.

• Bundle with magnetic base, dial indicator and 22 anvil point set
• Does NOT come with molded plastic case
• Mag base with 170# of holding poiwer fine adjustment knob for precise positioning
• Dial indicator with 0.0005" Resolution (half a thousandth), 1.00" total travel and accuracy to 0.001" per 1"
• Point set with fit most American and imported indicators and has 4-48 threads

User questions & answers

Question:	Is there any warranty of this. My dial stopped working about a month after purchase
Answer:	The MA445 will correctly read the current in that leg. To calculate the total *power* in the 3-phase system, you will need to measure the current in each leg and the voltage from each leg to neutral (in the case of a 4-wire 3-phase system) or the current in two legs and the voltage from each of those legs to the third leg (in the case of a 3-wire 3-phase system.)
Question:	Does this come with a case
Answer:	Hello,Thank You for your interest in the MA445 clamp meter. The MA445 can measure temperature in both °F And °C.Measurement ranges are:-40° to 1832°F/-40° to 1000°C (1°F/°C)Best Regards
Question:	What is the dimensions of the magnetic base
Answer:	Hello, the specs for the MA443 are listed below, I hope this helps AC Current 400.0A (1mA) True RMS DC Current — Basic Current Accuracy AC: ±1.8%
Question:	What is the stem mount diameter on the dial indicator
Answer:	Sorry there is no hanging kit with this item.

Product description

Professional Precision Tool Set!

Test Indicator

Precision Made by Türlen. 0-15-0 Premium Quality Indicator

Features:

• Easy to read 1-3/16" dial diameter white face with black markings
• 7 JEWELS
• 5/32" and 3/8" diameter posts with dovetail clamp
• Automatic reversing
• 3 dovetail panes on indicator
• Crisp graduations
• Durable satin chrome finish
• Graduations: 0.0005" per line
• Travel: 0.030"
• Hair trigger response to the lightest pressure
• Meets or exceeds federal specifications for accuracy

Dial Indicator

Precision Made by Türlen. Fine tune your machinery by adding a dial indicator to your set of tools.

Features:

• Easy to read 2-1/4'' white face with black markings
• Crisp graduations
• Durable satin chrome finish
• Spindle rack pinions and gear trains are made of high quality steel components ensuring long life
• Built to AGD specifications
• Vertical lug back configuration
• Graduations: 0.001'' per line, 0.1'' per revolution

Magnetic Base

Use this compact magnetic base in tight areas where full size base will not fit.

Features:

• Reduced scale for work in tight areas.
• 3-D rigid metal arm movement
• central locking mechanism, one knob locking system
• Dovetail clamp for holding most AGD group test indicators
• Clamping hole for holding many AGD group indicators stem
• Overall Reach: 7.5"
• Magnet On/Off switch
• Power pull-50 lbs.
• V-shape on bottom surface for firm holding on flat or round base

• Test Ind: Easy to read 1-3/16'' white crisp black markings
• Test Ind: Graduations: 0.0005" per line. Travel: 0.030". Automatic reversing.
• Dial Ind: Easy to read 2-1/4'' white face with crisp black markings
• Dial Ind: Graduations: 0.001'' per line, 0.1'' per revolution
• Mini magnetic base with Fine Adjustment and Central Locking. Overall reach 7.5" (4" each arm)

Product description

Nortools Dial Indicator, Test Indicator, Magnetic Base & Point Set



Dial Indicator with Magnetic Base-Dial Indicator: Measuring Range 0-1" and Reading 0.001" with Rear Cover with and without Lug;



Magnetic Base: 130lb with Fine Adjustment and 2 Magnetic Faces (Bottom and Back) and Switch on/off;



Indicator Points Set 22-Piece: AGD Specifications (4-48 Threads).

• Made of real steel hardened, professional and quality dial indicator (weight: 0.4lb) , totally different from light Aluminium one (weight: 0.23lb): heavier and stronger, then more durable, not so easy to be deformed, more shock-proof, professional quality and industrial use
• All finished dial indicators are inspected 100% piece by piece to control the accuracy
• Dial indicators with rear cover without lug and also a rear cover with lug separately in the case as a backup for widely used
• Magnetic base 130lb with fine adjustment and switch on/off and 2 magnetic faces (bottom and back), indicator points set 22-piece: AGD specifications (4-48 threads)
• Packed in hard plastic case

User questions & answers

Question:	I don't see a clamp or mounting for the indicator, how will it mount on this holder
Answer:	The ACDC-100 is a meter that can make measurements directly. This is not intended as an accessory to connect to the 87. I suggest maybe looking into the i410 or i1010 current clamps for DC measurements.
Question:	I paid 54.99 on this item that I just got on today but now it is 36.99. Why is this
Answer:	It will read 1/4 of an amp easily before the tolerance becomes somewhat skewed. 3-5 amps won't be any trouble at all. Just make sure that you adjust to the proper range setting of your expected ampacity.
Question:	What is the diameter of the rod mounted to the base
Answer:	Yes we offer the Manual in Spanish

Product description

Dial Indicator, Test Indicator, Magnetic Base & Point Set

• Our Part # ALL-51908
• 4 Pc. precision inspection set includes: 0-1" .001" dial indicator, magnetic base, .030" dial test indicator and 22 pc. indicator point set. Complete with hard plastic case.
• 1" dial indicator: graduation 0.001", 3/8" stem diamater, 2" dial face and lug back
• Magnetic base: overall height 9", on & off switch, 130 lb. power pull, base measures 2" width X 2-1/2" depth .030" dial test indicator: .0005" graduation, white face, 0-15-0 reading, .098" contact point, dovetail mount top, back and front. 22Pc indicator point set: AGD specifications (4-48 threads)

User questions & answers

Question:	Is the test indicator dove-tailed
Answer:	.38 inches or 10mm
Question:	Anyone know what tip I can use to replace the small ball tip on the test dial indicator, the ball broke off mine
Answer:	Yes we can, here at industrial Instrument works all of our calibration certs are dated the date the item ships out.
Question:	Does it read down to the tenth
Answer:	Yeah, a canvas-like zip up one.
Question:	Where can I get replacement parts
Answer:	The MAX function only works on AC volts, DC volts, and AC amps.

Product description

Dial Test Indicator, Indicator Style Vertical, Range 0 to 0.200 In., Graduations 0.001 In., Dial Reading 0-100, Dial Size 1-1/2 In., Dial Color White, Series 196, Range per Revolution 0.1 In., Bearing Type Plain, Reading Continuous, Contact Point Dia. 0.375 In., Features Continuous Dial Up to 0.200, Satin Chrome Finish, Includes 3 Contact Points, Adapter, Clamp, Tool Post Holder, Snug, Hole Attachment, Case

From the Manufacturer

The 196 Test Indicator is one of the most versatile indicators available. Over the years this tool has been improved by methods and materials, but the basic design is unchanged. It is simple to operate, smooth in operation, accurate and reliable, rugged and inexpensive - the best indicator value you can buy.

• Mpn: 196A1Z
• Country of manufacture: United States
• Manufacturer: Starrett

User questions & answers

Question:	does this kit come with the rods and clamps
Answer:	WxDxH: 50.0x62.5x55.0 mm (1.97x2.46x2.17 in.) not including the "on/off" switch.

Product features

Starrett 196A1Z Universal Dial Indicator, Back Plunger, White Dial, 0-100 Reading, 0-0.2" Range, 0.001" Graduation

The Starrett 196 series universal dial indicator has a 0 to 0.2" measuring range with 0.001" graduations for precise measurement of the rise or drop in a work piece. It has a 0 to 100 counter with one revolution equivalent to 0.1", and the white-face dial has a scratch-resistant crystal face for ease of reading. The plunger on the back of the dial comes with 1/2", 5/16", and 1/8" diameter contact points. The dial indicator has a 1/4" diameter stainless-steel shank for mounting.

Product description

• Bestest-5 dial test indicator with rotatable black face and carbide tip for measuring surface variations in narrow or recessed areas
• Continuous clockwise pointer rotation displays units in fractional inches, and ball-bearing lever system swivels through to 180 degrees
• Dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts on the top, front, and back
• Monoblock body design with jeweled bearings in an isolated assembly for high accuracy, anti-magnetic for use around magnetic chucks, and corrosion-resistant chrome plating
• Meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability

User questions & answers

Question:	Will i get a best test with swiss made on the dial and box
Answer:	Hello 54.99 is normal price for this item, 36.99 is sales price. When our stock is quite low, we will cancel the sales and reture to its normal price. Anyway, thank you for your order to our items. To reward your trust, please let me know your order no., I will reture you USD15. Ok? Please keep your interest on our items or even recommend to your friends.
Question:	what is the length of the contact tip
Answer:	Sorry but I bought a gauge, not a gauge holder, and I'm not sure why Amazon clubbed the items together for the purpose of questions.
Question:	Will this fit in a Starrett holder
Answer:	I would contact the sellers I do not have any paperwork in mind that has any kind of a warranty but I assumed they would help you out if not make sure you put up a post for the rest of us to know this and yeah sorry I can't help you anymore
Question:	I'm looking for the point that would fit this
Answer:	No

• Range: 0-0.03" graduation: 0.0005"
• Made of steel hardened with all metal components, durable satin chrome finish
• with 2 Steel Dovetail Clamps 3/8'' and 5/32'', dovetail mount on top and back and front for all-around positioning, 2 ways to fix on the magnetic base: stem (3/8" or 5/32") or dovetail (top or back or front)
• All finished dial test indicators are inspected 100% piece by piece to control the accuracy
• Packed in storage case; Please visit our store www.amazon.com/khcraft for the matching magnetic base

User questions & answers

Question:	Hi What diameter is the ball contact point
Answer:	5/64“
Question:	Will this work with a universal magnetic base
Answer:	generally speaking, yes, this test indicator works with all magnetic bases with 3/8" or 5/32" clamping hole.
Question:	Where does it make
Answer:	Do not see on product were made but had for a few months now and works fine Not Jeweled but for for the price works like intended. Even pick up a 2nd one for anouther guy in the shop. No problems here.
Question:	Is this jeweled
Answer:	Not jeweled.

Product features

Range and Graduation

• Range: 0-0.03" graduation: 0.0005"

All Metal Components

• Made of steel hardened with all metal components
• Durable satin chrome finish

Dovetail Clamps and Mount

• with 2 Steel Dovetail Clamps 3/8'' and 5/32''
• Dovetail mount on top and back and front for all-around positioning

QC and Fix

• All finished dial test indicators are inspected 100% piece by piece to control the accuracy
• 2 ways to fix on the magnetic base: stem (3/8" or 5/32") or dovetail (top or back or front)

Matching Magnetic Base Available

• Please visit our store www.amazon.com/khcraft for the matching magnetic base

Product description

Mitutoyo Pocket Test Indicator Set, Graduations: .0001", Range: .010", Dial Face: 0-5-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, 2 holding bars.

• Jeweled bearings
• Carbide contact points
• O-Ring sealed bezel
• Glare free, scratch resistant crystal
• Supplied in fitted plastic case

User questions & answers

Question:	Can I install a longer contact point, are they available
Answer:	I don’t think so this is going to be much useful on driving but for computer usage it’s good
Question:	can you use this to tram a mill
Answer:	Arm length is 5.3in.
Question:	Does this set come with a case
Answer:	The coloring is minimal but from the front you see a very slight blue tint.
Question:	what is the size of the dial face
Answer:	I don’t know. There is no magnification on my daughters pair of glasses.

• Range x Graduation: 0.03" x 0.0005''
• Dovetails on top and back for all-around positioning
• Includes two dovetail clamps (3/8'' & 5/32'')
• Fully Jeweled movement
• Contact Point adjustable 230 Deg.

User questions & answers

Question:	Were is this indicator made
Answer:	Accusize tools is out of Canada but nowhere on the indicator or box is the manufacturing location
Question:	it can be use to indicate milling machines
Answer:	Yes.... with the appropriate type of indicator holder.
Question:	hmm - what are the scale units? if in .0005 units then the '5' on the scale means ".0025" or 5x .0005" ??? confused
Answer:	The '5' would mean 0.005 or 5 thousandths. There are 10 tick marks between 0 and 5. Each tick mark is 0.0005
Question:	Does it come with extra points? Are they available
Answer:	Do not think the arm and tip is replaceable, I have not used it as yet it is a spare for alignment on my mill.

Product description

This is a magnetic base AND dial indicator. Features: TEST INDICATOR 1) Body is made of machined anodized aluminum and NOT plastic 2) Vertical lug back configuration 3) 1 inch of total travel with graduations in 0.0005 (that's half a thousandth) per line 4) Accuracy guaranteed to 0.001 per 1 inch of travel 5) Each indicator comes with inspection certificate 6) Spindle rack pinions and gear trains are made of high quality steel components ensuring long life 7) Does not come with plastic case, MAGNETIC BASE 1) Base weighs 3 pounds has a built-in super strong magnet with 176 pounds (80 Kg) of holding power 2) Magnet has an On/Off switch which easily and quickly engages / releases magnet 3) Base has V-groove on bottom for mounting on cylindrical surfaces 4) Fully adjustable chrome plated two-arm design 5) Precision fine adjustment knob for precise positioning 6) Accepts nearly all AGD dial and test indicator mounts 7) Overall height 9 inches 8) The vertical arm extends 7 inches from the base. The cross arm is 6 inches in length 9) Does not come with plastic case

• Mag base with super strong magnet with 176 pounds (80 Kg) of holding power
• Mag base with fine adjustment knob for precise positioning
• Dial indicator with 0.0005" Resolution (half a thousandth) and 1.00" total travel
• Dial indicator with accuracy guaranteed to 0.001" per 1"
• Does not come with plastic case

User questions & answers

Question:	Hi. Can this combo be made with a metric indicador
Answer:	You place the tip (spindle, gauge head, contact point) of the dial indicator on the work piece. Adjust the the dial indicator so the needle spins a few times as the tip is depressed more. You want room for the measurement to move either way (in or out) . Next loosen the bezel clamp hand screw that prevents the bezel (the blue colored part of the indicator that also holds the clear dial cover) from moving. Gently turn the bezel until the 0 (zero) on the dial is near dial needle. Then use the adjustment knob on the magnetic base arm for fine adjustment of the dial indicator. tighten the bezel clamp to keep the bezel from moving.
Question:	Can this be used to measure the exact wobbling ( run out )of a drill bit
Answer:	No , it does come in a well protected box.
Question:	I just bought this item and I am checking to see how to zero out the unit
Answer:	Yes, as long as you get a tip with a 4-48 thread
Question:	Does it come with a protective storage case
Answer:	It will most likely be shock proof if you get one that is jeweled if you go to Mitutoyo's website you can look up the specifications in their catalog and it will tell you the specific number for that indicator

Product description

Dial Indicator, Magnetic Base & Point Precision Inspection Set Complete with hard plastic case with 2" dial face and lug back.

• 3 Piece precision inspection set includes: 0-1" .001" dial indicator, magnetic base and 22 piece. indicator point set. Complete with hard plastic case
• 1" dial indicator: graduation 0.001", 3/8" stem diameter, 2" dial face and lug back
• Magnetic base: overall height 9", on and off switch, 130 lb. power pull, base measures 2" width X 2-1/2" depth
• 22 pc. indicator point set: AGD specifications (4-48 threads)

User questions & answers

Question:	Is a spark plug hole adapter availible
Answer:	I would not as the flutes in the drill bit would catch on the point of the dial indicator and could damage the dial indicator.
Question:	can this be used to measure free play on my harley wheel
Answer:	Not sure what you want to use this for. It will work for Brake rotor run-out, differential backlash and many other things like that. Doesn’t matter what type of vehicle or piece of equipment you’re using it on. With all due respect it sounds to me like you’re trying to do a job that you do not have the experience to do. I think you should go to your local mechanic.
Question:	Can this be used to measure the exact wobbling of a drill bit
Answer:	The cover rotates and allows you zero the gauge
Question:	Will this work on a Chevrolet 3500 express box truck with a 10.5 4.10 Gear ratio and does this product come with directions how to use it
Answer:	Don't know did not come with mind.