13 best brown sharpe caliper
The Brown & Sharpe caliper is a precision measuring instrument used in dimensional measurement and inspection processes in industrial settings. It is known for its accuracy and reliability in providing precise measurements of various objects. Brown & Sharpe is a well-established manufacturer of high-quality metrology equipment.
Key features and aspects of Brown & Sharpe calipers:
Design: Brown & Sharpe calipers typically have a robust construction, often made from high-grade stainless steel. They are engineered for durability and accuracy, ensuring they can withstand the demands of industrial environments.
Types:
- Vernier Calipers: These are traditional calipers with a sliding scale and a main scale. The vernier scale allows for very fine measurements.
- Digital Calipers: Modern Brown & Sharpe calipers often come with digital displays for easy and precise readings.These digital calipers have the advantage of quick and error-free readings.
Accuracy: Brown & Sharpe calipers are known for their high level of accuracy, often capable of providing measurements down to a thousandth of an inch or a hundredth of a millimeter.
Usage:
- Dimensional Measurement: They are used to measure the dimensions of various objects, including length, width, thickness, and depth.
- Comparative Measurements: Brown & Sharpe calipers can be used to compare the dimensions of two objects by setting the caliper to the dimensions of one and then measuring the other.
Joint Calipers and Dividers: Brown & Sharpe also manufactures joint calipers and dividers, which are similar tools used for layout and marking in addition to measurement.
Test Measure Inspect: Brown & Sharpe calipers play a crucial role in the test, measure, and inspection processes within industrial settings. They help ensure that manufactured components meet specified dimensional requirements.
Industrial and Scientific Applications: These calipers find applications in a wide range of industries, including manufacturing, aerospace, automotive, and engineering. They are also used in scientific research where precise measurements are essential.
Calibration and Maintenance: Like all precision measuring instruments, regular calibration and maintenance are crucial to ensure the accuracy of Brown & Sharpe calipers over time.
Remember, it's always recommended to refer to the manufacturer's guidelines and specifications for the specific model of Brown & Sharpe caliper you are using, as there might be variations in features and usage depending on the model and series.
Below you can find our editor's choice of the best brown sharpe caliper on the market
Brown & Sharpe 599-579-5 Dial Caliper, Stainless Steel, Black Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution, Meets DIN 862 Specifications
TESA Brown & Sharpe
Product description
- Precise dial graduations of 0.001", with one revolution equivalent to 0.100"
- Hardened stainless steel construction for corrosion resistance and long life
- 1.25" diameter rotating dial has a lock screw to hold the sliding jaw in position, to help ensure consistent measuring
- Covered rack keeps foreign matter from clogging the gear, to help prevent measurement error
- Linear accuracy meets DIN 862 standards
User questions & answers
| Question: | They used to say swiss made on the face. they don't anymore. are they |
| Answer: | I didnt realize that they stopped putting Swiss made on them, The pair I purchased in 2014 were made in Switzerland. I cant say with any certainty where they are made now, I hope they havent gone to china, but if you are unsure just but a pair of Mitutoyo , they are made in Brazil but are excellent quality. Hope this answer helped . |
| Question: | does it come with a case |
| Answer: | Yes, it comes in a hard-foam-filled plastic case. |
| Question: | What is the dial cover made of - glass, or plastic? Does it scratch easily |
| Answer: | I was a Machinist for over 20 years and owned a pair of B&S 6" dial calipers. With the "rough" work environment of a machine shop, the face of the calipers never got a scratch on it. I used them every day of the 20+ years as a Machinist. I recommend B&S calipers over Starrett calipers any day and I love Starret precision measuring instruments. Buy them without a care. |
| Question: | is it really made in Switzerland |
| Answer: | Mine was stamped on stem. swiss made. All i can say is this is very precise with consistent readings. I would never change this analog for a digital one. Mine has black dial. Hope this helps. Ted S |
Brown & Sharpe 00599391 Valueline IP67 Electronic Caliper, 0 to 6" Range, 0.0005" Resolution, Round Depth Rod
TESA Brown & Sharpe
Product description
The Brown & Sharpe value line IP67 caliper is a cost effective solution for achieving the highest degree of protection from dust and liquids. Featuring a smooth and durable Stainless steel frame, Brown & Sharpe value line calipers perform inside, outside, depth and step measurements.
- 0-6 inch/0-150 mm range, 0005 in/0.01 mm res
- Use with confidence - dust and liquids protection for every workshop environment
- Easy reading, high contrast display with 7/16 in characters
- Save your reference - absolute and differential mode functionality
- Thumb roller for fine measurement
User questions & answers
| Question: | Does this item come with a calibration certificate from a known ISO17025 certified calibration lab |
| Answer: | Greetings J.: It comes with a short inspection report, but I do not know the answer to your question. The report has an AC 302 stamp, inscribed in a rectangular box. |
| Question: | Do these calipers have auto shut off |
| Answer: | Yes, after 10 min of no activity, they shut off. When you measure again, they turn back on. |
| Question: | what is the country of origin |
| Answer: | There is no marking on the brown & sharp caliper identifying where it was made. One of the pamphlets that came with the caliper has the address: 250 Circuit Dr., North Kingston, RI 02852-1700. Also a website is given: tesagroup.com |
| Question: | What Diameter is the round depth rod on this caliper |
| Answer: | I dont have mine in front of me but I looked up the drawing on Brown & Sharpe's product page.it says the rod diameter is 1.5mm |
Brown & Sharpe 00510050 Dial Caliper, Stainless Steel, Yellow Face, 0-150mm Range, +/-100mm Accuracy, 0.01mm Resolution, Meets DIN 862 Specifications
Hexagon Metrology
Product description
- Accuracy of 100mm for precise measurements
- Hardened stainless steel construction for corrosion resistance and long life
- 32mm diameter rotating dial has lock screws to help ensure consistent measuring
- Covered rack keeps foreign matter from clogging the gear, to help prevent measurement error
- Linear accuracy meets DIN 862 standards
User questions & answers
| Question: | IS THIS 00510050 AMERICAN MADE |
| Answer: | Thanks for asking! The brand is TESA and it is a Swiss brand. On the Dial it is written "Swiss made". So i think it is a genuine Swiss piece. |
| Question: | Made in ? There isn't a single reference or marking on the box or the caliper where is made |
| Answer: | I purchased Brown & Sharpe 05.10008 Caliper 150mm on September 15, 2017. Swiss made, very good quality!!! |
Brown & Sharpe 00590092 Twin-Cal IP40 Digital Caliper, 0-6 in/0-150 mm Range, 0.0005 in/0.01 mm Resolution, Round Depth Rod, Built in Wireless Functionality
TESA Brown & Sharpe
Product description
- Measures 0 to 6"/0 to 150mm with 0.0005"/0.01mm resolution and up to 0.001"/0.03mm accuracy for precise measurements
- Stainless-steel frame and slide for durability and corrosion resistance, thumb wheel slide control, round depth rod
- LCD for viewing inch/mm measurements, TESA TLC data output port
- Compatible with TESA TLC wireless data collection systems (sold separately)
- Meets ISO13385-1 dimensional standards and Ingress Protection certified IP65 against dust and liquids
User questions & answers
| Question: | Country of origin |
| Answer: | There is no marking that I could find regarding country of origin. I also have an older version of this tool that is marked "Swiss Made". I am quite happy with both of them, very accurate and well made. |
| Question: | What battery does this caliper use |
| Answer: | CR2032 |
| Question: | Is the unit calibrated |
| Answer: | Yes |
| Question: | Does this have auto shut off |
| Answer: | Yes, it has auto shut off, after 10 minutes, and just as important, it turns on the instant the slide is moved. |
Brown & Sharpe 599-578-9999 Fitted Wood Case for Caliper and T-Bar
TESA Brown & Sharpe
Product description
- Fitted wooden case for use with Brown & Sharpe 6" dial calipers and depth foot (sold separately)
- Hinged case with latching hasp for secure storage
- Satin chrome hinges for durability
User questions & answers
| Question: | will the case work with Brown and Sharpe vernier calipers as well |
| Answer: | The B&S #577 Vernier calipers fits perfectly. When I received mine, an error had been made at the end of the hinge routing. I called the manufacturer (not B&S) and the owner blamed everyone who may have touched it after he shipped it, ( but himself) for his companies error in manufacturing. I then used an Exacto knife and got it to close properly. When you get it examine it closely and send it back if any errors are noted. |
Mitutoyo 505-742-56 D6"TX-6 Dial Caliper, Black Face, 0.1"/Rev, 0"-6", 0.001"
Mitutoyo
Product description
Mitutoyo 505-742-56 D6"Tx-6, Caliper, Dial, Black Face,.1"/Rev, 0-6",.001".
- New designed dial movement for ultra smooth sliding and high shock protection
- Removal of Tin coating on sliding surfaces without sacrificing wear life
- Lock screw for dial bezel and for holding the sliding jaw position
- Can measure OD, ID, depth, and steps
User questions & answers
| Question: | Is it made Of hardened stainless steel |
| Answer: | hell no your nuts |
| Question: | Does it come with a box |
| Answer: | Thanks for your asking. For our Proster 6000 Counts Clamp Multimeter,which is accurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected] |
| Question: | Where is this caliper manufactured |
| Answer: | Nope.... it's basically assembled in China with high quality parts approved and tested by Klein Tools.!! |
| Question: | Is any part of the caliper plastic or is it fully constructed with metal |
| Answer: | I use my meters for general service work . See if a device has power , ect. I have never had one calibrated . Unless one is doing precision lab work I would not thank it would be needed. |
TESA Brown & Sharpe 00590302 TWIN-CAL IP67 Digital Caliper, 0-6" Range, 0.0005" Resolution, Round Depth Rod, Built in Wireless Functionality
Hexagon Metrology
Product description
- Digital caliper with 0 to 6"/0 to 150 mm measuring range and 0.0005"/0.01 mm resolution is used to perform inside, outside and depth measurements
- 1.5" jaw depth holds parts securely in place while measuring
- Absolute measuring retains the zero setting after powering off
- Stainless steel body is PVD coated for increased durability, and a sealed plastic housing is certified IP67 for protection against dust, oil, and coolants
- TESA wireless interface and wired data output port export data to a computer for data analysis or long-term records retention (requires cable or wireless receiver, not included)
User questions & answers
| Question: | Is it made in America or China |
| Answer: | China!!!! |
| Question: | Sold with battery or without battery |
| Answer: | With battery. Varry accurate calipers! Use mine daily for last year still within .0002 |
| Question: | Two different ranges given, 0-6" & 0-12" Which is it |
| Answer: | these are 6" |
| Question: | were is this caliper made i hope this not some imported chinese junk |
| Answer: | order the 799A its reportedly made in USA,, However it probably has imported parts .It is a steel product Tho...Mine was actually stolen by some low life..I hope he reads this |
Brown & Sharpe 00590305 Twin-Cal IP67 Digital Caliper 0 to 12" Range, 0.0005" Resolution, Square Depth Rod, Wireless Data Port
TESA Brown & Sharpe
Product description
- Measures 0 to 12"/0 to 300mm with 0.0005"/0.01mm resolution and up to 0.001"/0.03mm accuracy for precise measurements
- Stainless-steel frame and slide for durability and corrosion resistance, thumb wheel slide control, square depth rod
- LCD for viewing inch/mm measurements, TESA TLC data output port
- Compatible with TESA TLC wireless data collection systems (sold separately)
- Meets ISO13385-1 dimensional standards and is Ingress Protection certified IP65 against dust and liquids
User questions & answers
| Question: | Do these calipers come with a certificate of calibration |
| Answer: | They do not. We are a steel manufacturing facility and we test and certify them ourselves. |
| Question: | i read on 6" that they default metric at each turn on. is this the case |
| Answer: | I use the auto on off and it's stays on imperial |
Brown & Sharpe 75.116550 Dial Caliper, Stainless Steel, Black Face, 0-6" Range, +/-0.001" Accuracy, 0.1" Resolution, Meets DIN 862 Specifications
Hexagon Metrology
Product description
- Accuracy of 0.001", with one revolution equivalent to 0.100" for precise measurements
- Hardened stainless steel construction for corrosion resistance and long life
- 1.25" diameter rotating dial has a lock screw to hold the sliding jaw in position, to help ensure consistent measuring
- Covered rack keeps foreign matter from clogging the gear, to help prevent measurement error
- Linear accuracy meets DIN 862 standards
User questions & answers
| Question: | Why does the black face model have different writing/information than the white dial etalon? inox trempe and swiss made on the dial |
| Answer: | I believe the photograph is wrong. |
| Question: | are they shockproof |
| Answer: | Yes. Don't bother looking into any other pair of caliper, Brian. This is the last 6" pair you'll ever need. |
| Question: | Are these calipers swiss made |
| Answer: | My set is marked "Swiss Made" |
| Question: | Two questions: does this caliper come with an n.i.s.t. certificate of accuracy? is the dial cover made of glass, or is it plastic? thank you |
| Answer: | The calipers come with a certificate of accuracy, but not NIST. Mine came with a TESA SA certificate from Hexagon Metrology (hope that means something to you...). The dial face seems plastic. I'm very satisfied with the build quality, accuracy, and repeatability of measurements, compared to what else was available for similar price. |
Starrett Dial Caliper Measuring Tool 3202-6, Hardened Stainless Steel Metal, 6 Inch Range, 0.001" Graduation, Measure Inside Outside Dimensions and Depth, Carry Case Included, White
Starrett
Product description
Starrett Dial Calipers provide quick, easy, and accurate measurements of outside dimensions, inside dimensions, and depth. The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working, woodworking, and machinist professionals for decades. This series features 0 – 6 inch measuring range and 0.001 inch graduation. It offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable. It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control. The caliper comes included with a convenient carry case. The L.S. Starrett Company manufactures precision measuring tools, metrology, and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
- FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications
- RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
- FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
- VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
- EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control
User questions & answers
| Question: | The System of Measurement listed above is metric. Isn't this model and English or inches model |
| Answer: | The details and description on this page indicates inches in both measuring range (0-6") and on the dial unit of measure indicated in the upper center of the dial (.001"). Both using the " symbol abbreviation for inches. I JUST ordered one of these and certainly hope it is not metric when it arrives. js |
| Question: | Is this American Made |
| Answer: | It says on their website that the only calipers made by Starrett are the 120 series. Everybody says it's disappointing, but why do you think they are so cheap? The 120's are like $200 |
Mitutoyo 505-742-51 D6"TX-1 Dial Caliper, Blue Face, 0.1"/Rev, 0"-6", 0.001"
Mitutoyo
Product description
Mitutoyo 505-742-51 D6"Tx-1, Caliper, Dial, Blue Face,.1"/Rev, 0-6",.001".
- New designed dial movement for ultra smooth sliding and high shock protection
- Removal of Tin coating on sliding surfaces without sacrificing wear life
- Lock screw for dial bezel and for holding the sliding jaw position
- Can measure OD, ID, depth, and steps
User questions & answers
| Question: | caliper and case or just caliper with out case |
| Answer: | Caliper and case |
| Question: | How thick is the depth rod |
| Answer: | The end of the depth rod is .086 by .125 thousandths of an inch which is 3/32's by 1/8 of an inch. One quarter of an inch higher the width increases to 1/4. |
| Question: | Where is this caliper manufactured |
| Answer: | Brazil |
| Question: | Does this come in a case |
| Answer: | Yes, it comes with a case. I have bought many of these for our maintenance department over the years and they work well for general measurement. |
Brown & Sharpe 599-579-200 Centerline Plus Caliper Accessory Set
Hexagon Metrology
Product description
Fits all Brown & Sharpe and competitive 6" dial, digital and vernier calipers. Jaw attachment slots are manufactured to 0.140". Measure places impossible to reach with a regular caliper - undercuts, grooves, webs, and shoulders. Set consists of: Jaw attachments, Stem Points 3/8" length x 0.055" diameter, 1/4" diameter disks, 3/8" diameter disks.
- Country Of Origin: United States
- Model Number: 599-313-2421
- Item Package Dimension: 5.599999994288" L x 4.599999995308" W x 1.399999998572" H
- Item Package Weight: 0.7 lb
Brown & Sharpe 599-815-4 Spring Nut Inside Spring Caliper, 0-4" Range, Stainless Steel, Flat Leg
TESA Brown & Sharpe
Product description
- Spring caliper for use in layout and measuring inside distance up to 4"/100mm
- Hardened and tempered steel joints, spring, washers, and divider points for durability
- Knurled nut for adjusting divider point width
User questions & answers
| Question: | On the 10" one, does anyone know the length of the legs from the screw down |
| Answer: | * Actual capacity is approximately the same as the leg lengths* Strong, flexible spring for smooth, even action* Range 10 in Max, 250 mm Max* Measurement Type Inside* Type Spring Caliper* Wt. 0.42 lb |
Latest Reviews
View all
Bodyj4You Ear Pieces
- Updated: 01.05.2023
- Read reviews
Lexar Thumb Drives
- Updated: 27.06.2023
- Read reviews
Swivel Glider For Nursery
- Updated: 30.04.2023
- Read reviews
Image Friend Globes
- Updated: 21.03.2023
- Read reviews
Fry Baby Deep Fryer
- Updated: 14.02.2023
- Read reviews