10 best height gauges

Product description

Igaging 12"/0.0005" digital height gauge W/absolute origin Super high accuracy high gage. Uses absolute technology that Memorize the zero origin. Accuracy can be increased with the use of engaging electronic probe/indicator (0.5" search: 35-950-12, 1.0" search: 35-950-25, 2.0" search: 35-950-50, 4.0" search: 35-950-99). the probe can connect with included cable to the height gauge for cumulative measurement. Features: connect and interact with igaging absolute digital indicator probes (35-950-xx) to increase the accuracy of the height gauge to 0.0002"-0.0004" large easy to read LCD display absolute technology that Memorize origin zero resolution: 0.0005"/0.01mm accuracy: 0.0015" indication variability: 0.0005"/0.01mm SPC/USB data port Carbide tipped scriber ABS/Inc. measurement includes indicator/probe holder height Gauge can use AC power with included cable.

• Large easy to read LCD display
• Absolute Technology that memorize origin zero
• Resolution: 0.0005"/0.01mm
• Accuracy: 0.0015"
• Indication variability: 0.0005"/0.01mm

User questions & answers

Question:	Does this have a fine tune adjustment
Answer:	M-DRO and made in China
Question:	Do the instructions give some accuracy specs over the full travel
Answer:	We are expecting to have our Blood Vitality available by the end of January. If you'd like to be notified of its availability, just send us a personal email and we'll add you to the notification list! Jake Tollefson, Customer Experience Ancestral Supplements
Question:	What is the accuracy over the full range of travel
Answer:	Blood Vitality is particularly rich in heme iron compared to other organs and glands. The amount of heme iron that one would expect in one dose of Blood Vitality (6 capsules) is approximately 24.4 mg. Jake Tollefson, Customer Experience Ancestral Supplements
Question:	What is the metal bar with the hole in one end for
Answer:	Since blood fractions are contained within the blood, you could say that our product contains blood fractions (platelets, immunoglobulins, plasma, etc.). Our supplements are a whole-food, natural source of vitamins, nutrients, cofactors, and enzymes that interact in harmony with nature as opposed to concentrated doses (and isolated compounds) that are manufactured. Jake Tollefson, Customer Experience Ancestral Supplements
Question:	Brand, where is it made
Answer:	There is 1000 mg of liver per six capsule serving of our Blood Vitality product. This comes out to be about 0.9 mg of copper per six capsules serving. Jake Tollefson, Customer Experience Ancestral Supplements

Product description

• Calibrated height gauge measures 0 to 12.0" (0 to 300mm) with 0.0005" (0.01mm) resolution and + or - 0.0015" accuracy, for marking or measuring the height of objects
• LCD screen displays 10mm characters in inches and metric units
• Scriber is carbide-tipped for durability and column is rigid for accuracy
• Hand-operated feed wheel for adjustments
• Includes a Mitutoyo Certificate of Calibration that the tool has been calibrated, and meets the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories

User questions & answers

Question:	Can you move this rapidly up and down, or just with the wheel
Answer:	I looked this up on the vendor's website. There, they claim ±0.04 mm/0.0016 in for accuracy.
Question:	Is this product made in Japan
Answer:	its for mounting a dti (dial test indicator )

Product description

• Measurement range of 0” - 24"/0 - 600 mm, and precise to 0.0005”/0.01 mm
• LCD digital readout displays sharp figures in inches or metric for viewing ease
• Hand-operated feed wheel for measurement ease
• Electrostatic capacitance linear encoder helps ensure repeatable, precise measurement
• Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer

User questions & answers

Question:	Does mitutoyo 570-314, hds digimatic height gage, 24" x .0005"/0.01mm, with output come with calibration certificate
Answer:	No but will automatically hold zero along entire length of a digital drop indicator with digital output. No need for fine adjustment with both gages zeroed to each other.
Question:	The price includes scriber and the scriber clamp
Answer:	All I can tell you is it's accurate to four places behind the Dec. I really like the one I have No complaints at all.

Product description

A multi-purpose dust and oil resistant gauge! Set the cutting height on your router table, table saw or other Woodworking machines. It can also precisely align your jointer knives or even measure thickness (when placed on a true-Flat surface). The strong magnetic base allows easy mounting to ferrous machine tables or fences. Accurate to within 0.001-Inch. Measurements are read in the large, clear LCD display to 0.0005-Inch, 0.01mm and 1/128-Inch. The stainless steel beam with solid aluminum alloy base keeps the digital height gauge steady while making height adjustments. It can be zeroed at any point. Max measurement height is 6-Inch. Extra battery included.

• 6-Inch Capacity
• Magnetic Base
• Accutrate to 0.0005-Inch
• Fraction Display
• Heavy Duty

User questions & answers

Question:	Where is the product made
Answer:	This comes with the long form manufacture 1 year certification.
Question:	Will the readout show a decimal display? Or is it strictly a fractional display
Answer:	Yes, both the carbide-tipped scriber and scriber clamp is included.
Question:	Does it has a USB port for an interface cable
Answer:	I just use the wheel
Question:	Is the measuring foot also a scribe and strong enough to make a line in a metal part? Or is it a dull point and only used to make flat measurements
Answer:	No. This is Made in China - but with Mitutoyo Japan's QC. These units have not had any problems that i have heard.

Product description

• Measurement range of 0 to 200 mm, and precise to 0.02 mm
• Vernier scale for precise measurement in fine units
• Lightweight unit suitable for measuring small objects
• Hand-operated slider with fine-adjustment carriage for precise feed
• Carbide-tipped scriber for hardness and long life

Product description

Easy-to-read LCD 8mm (.932") high characters

• Measurement range of 0 to 6" (150mm), and precise to 0.0005" (0.01mm)
• High-contrast LCD digital readout displays in inches or metric
• Fine adjustment thumb roll and lock to hold slide position
• Steel scriber can reference zero from bottom of the base to obtain full usable range
• Hardened, stainless steel bar for durability
• Easy-to-read LCD .32-Inch high characters
• Hardened, stainless steel bar for long life

User questions & answers

Question:	What country is this product made? Let me know. Thanks
Answer:	It depends on how fast you are riding or how vigorous the activity right, couple that with, are you generally a warm blooded person or cold. For me, I am warm blooded and average about 18 to 20 mph on my morning rides of about 20 miles. It has been between 35 and 50 degrees and These gloves were perfect and affordable. They have silicone on the palm so you have a good grip. The fit is snug and easy to get off and on. They do have a short wrist collar, so they will go right under a long sleeve without bunching up. I leave them in the trunk and don’t really worry about getting an expensive pair stolen. I hope this is helpful.
Question:	Does this come with a calibration certificate
Answer:	I am not a bike rider, but I would say you might want some gloves specifically for bike riding. These keep your hands warm, but I have noticed when it is more windy they do not work as well. I would say that they are not very wind proof.

Product features

Starrett 3751AZ-6/150 Electronic Height Gage

The Starrett 3751AZ-6/150 is an electronic height gauge with fine adjustment thumb roll, slide lock, a steel scriber, a hardened stainless steel bar, a measurement range of 0 to 6" (150mm), and a high-contrast LCD digital readout precise to 0.0005" (0.01mm) with + or – 0.001" (0.03mm) of accuracy. The LCD characters are 0.32" high for ease of reading. A fine adjustment thumb roll provides precision measurements.

Product description

This gauge is a highly accurate measuring device developed specifically for woodworking. It can be used to set saw blade and router bit height as well as set the distance from a router fence to the bit. They are constructed of high quality anodized aluminum along with hardened and ground stainless steel components. They include the same advanced Wixey Technology features found in all our other Digital Readout products. The magnetic base allows easy positioning for measurements on cast iron table tops and the stainless steel hardened and ground anvil insures long term measuring accuracy.

•Dimensions: Measures 12" wide by 8.2" long by 1.5" tall; 13.6 ounces

•Displays inches with fractions or millimeters

•Large easy to read display

•Resolution 0.05mm, 0.001-inch, 1/64-inch

•Stable magnetic base for easy positioning

•Lays flat for fence-to-router bit positioning

From the Manufacturer

This gauge is a highly accurate measuring device developed specifically for woodworking. It can be used to set saw blade and router bit height as well as set the distance from a router fence to the bit. They are constructed of high quality anodized aluminum along with hardened and ground stainless steel components They include the same advanced Wixey Technology features found in all our other Digital Readout products. The magnetic base allows easy positioning for measurements on cast iron table tops and the stainless steel hardened and ground anvil insures long term measuring accuracy. The large easy to read display reads in inches with fractions or millimeters. The fractions are displayed using "Precise Fraction Technology" which gives you 4 times the accuracy of other fraction readouts. The decimal inches are displayed in .001-inch increments, the fractions in 1/64-inch, and the millimeters in .05mm increments. Accuracy is .001 decimal inches, 1/500 fraction inches, and .025mm metric.

• Displays inches with fractions or millimeters
• Large easy to read display
• Resolution 0.05mm, 0.001-inch, 1/64-inch
• Stable magnetic base for easy positioning
• Lays flat for fence-to-router bit positioning

User questions & answers

Question:	How tall can it measure
Answer:	I bought this as a gift and can't look at it to,see. However according to Igaging the manufacturers web page, it is made in the USA.
Question:	How tall is the metal base
Answer:	It has three display modes, metric (32 MM), Decimal Inch (1.25") and Fractional Inch (1 1/4").
Question:	where is the battery in the digital height gauge
Answer:	Yes it does. The port is near the thumbscrew. I am not sure why the rest of the commenters told you no. I do not use it, however the company does provide a kit (35-777) which includes a rs232c usb interface, cable, and software. I do not know the price of the kit.
Question:	Is the measurement arm able to scribe metal
Answer:	It is perfectly suited for scribing soft metals. In fact, the instructions refer to the measuring foot as the "Measuring scriber". The point on the measuring scriber is razor sharp (not chamfered), made of hardened steel (file doesn't cut it, I tried) and over .285 thick. Having said that, you don't want to apply excessive torque to the tool as, I assume, it could affect accuracy.

Product description

HHIP dial height gage is made of high quality stainless steel and satin chrome finish. Carbide tipped scriber for longer life. Fine feed adjustment. Positive lock screw. Come with fitted case. Graduation is 0.001". size range is 0 - 6".

• Made of high quality stainless steel and Satin chrome finish
• Fine feed adjustment
• Positive lock screw
• Come with fitted case
• Carbide tipped scriber for longer life

User questions & answers

Question:	What are the dimensions of this item
Answer:	Mine is a compartment that holds a CR2032 (camera type flat button battery) located just below the thumb screw in the black plastic component that contains the indicator. My compartment simply slides out parallel with the base.
Question:	I purchased this item and found one of the small locking screw that keep the gauge from moving is missing. Any way to get one of these replaced
Answer:	The WR200 is designed as a woodworking tool to measure heights above the table or distances of saw blades and router blades from the fence not as a scribe. So no it is not able to scribe metal.

Product features

4300-0028 - Stainless Steel Dial Height Gage - WC

HHIP dial height gage is made of high quality stainless steel and satin chrome finish. Carbide tipped scriber for longer life. Fine feed adjustment. Positive lock screw. Come with fitted case. Graduation is 0.001". size range is 0 - 6".

Product description

iGaging Snap Check Height Gauge for Woodworking Jointer/Router/Planar Blade

Use Snap Check to set jointer knives, jointer table parallelism and precise depth of cut. Set table saw blade and dado stacks for depth of cut. Snap Check is the perfect tool for setting router bits to either a router base or router table. You will find lots more uses in your shop.

Let Snap Check make your machine and tool setups a SNAP!

• Smooth Spring Plunger Movement
• Flat and Ball Tip Anvils Included
• Super Strong Rare Earth Magnetic Base
• Humidity & Dust Resistant. Auto shut off.
• Display Inch/mm/Fractions.
• Accuracy 0.001"/1".
• Range: 1/4" depth to 2" height
• Spare battery included

• Smooth Spring Plunger Movement
• Flat and Ball Tip Anvils Included
• Super Strong Rare Earth Magnetic Base
• Humidity & Dust Resistant. Auto shut off.
• Display Inch/mm/Fractions. Accuracy 0.001"/1". Range: -1/4" to 2"

User questions & answers

Question:	how well does it work for jointer blade set up
Answer:	Roger,The Clamp for !2" height gage has a 6 X 11mm slot for holding a scriber or height gage bar.I added a picture to the layout if you want to view what they look like.Regards,Rob B
Question:	Does anyone have any suggestions as to how or where to get a replacement anvil
Answer:	I looked at the item in our stock. It appears to be a M2.5 screw. Please confirm and I will send you another one
Question:	The base looks like injected plastic...it is square and accurate
Answer:	It can measure up to 4 1/2 inches. I love it for determining table saw blade height router table bit height Oh and some miscellaneous other night.
Question:	is this right and left reading
Answer:	It will measure to a height of 4.641". I have used it quite a bit for dato height on my table saw, router, dato wiz, mortise machine and even drill press. The accuracy is down to the thousands. I was so glad to find this some years ago which increased the accuracy of cuts and speed in setting up.

Product description

Features:

This digital display height gauge is made from engineering plastic, high strength, wear resistance and durable in use. Designed with heavy stainless steel base on the standing feet so it would more stable. Digital display, easy to read the data. The metric imperial system caliper takes with reset button for zeroing for relative measuring. The digital display is designed specifically for woodwork, which can be used to set the height of saw blades.

Specification:

Material: Plastic

Weight: 1070g/37.7oz

Measuring Range: 0-150mm

Battery: 3V button cell (Not included) 



Package List:

1 x Digital Height Gauge

• 【 Premium Quality Height Gauge 】 - This digital display height gauge is made from engineering plastic, high strength, wear resistance and durable in use
• 【 Practical Design Depth Gauge 】 - Designed with heavy stainless steel base on the standing feet so it would more stable
• 【 Digital Display Height Caliper 】 - Digital display, easy to read the data
• 【 Height Gauge with Reset Button 】 - The metric imperial system caliper takes with reset button for zeroing for relative measuring
• 【 Height Gauge for Woodwork 】 - The digital display is designed specifically for woodwork, which can be used to set the height of saw blades