13 best mechanical vibration sensors

Product description

Features:

Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.Is specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.

It use the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation.

Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.

It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc.

Multifunctional,  with Temperature Measurement, Auto Switch Range,  Backlight, Auto Power off.



Specification:

Vibration Pickup: Piezoelectric Ceramic Accelerometer(shear-type)

Acceleration: 0.1~199.9m/s²

Velocity: 0.1~199.9m/s

Displacement: 0.001~1.999mm

Acceleration Frequency Range: 10HZ~1KHZ(LO); 1KHZ~15KHZ(HI)

Velocity Frequency Range: 10HZ~1KHZ

Displacement Frequency Range: 10HZ~1KHZ

Accuracy: ±5%H±2digits

Power: 9VDC battery（not included）

Size: 70 * 35 * 100mm / 2.8 * 1.4 * 3.9in

Weight: 1000 g / 35.3 oz(approx.)



Package list:

1 x Vibration Analyzer Tester（battery not included）

1 x instructions

3 x probe

1 x Aluminum case

1 x Split probe

• Ideal Tool for Mechanical Vibration Measurement: This Vibration Meter is used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.Is specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep
• Offers High Efficiency and Accurate Performance: It use the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation
• Shows Acceleration, Speed & Shift of the Vibration with Electrical Signal: Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration
• Widely Applications: It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc
• Multi-functional Provides Convenient Operation: Multi-functional, with Temperature Measurement, Auto Switch Range, Back-light, Auto Power off

Product description

Specification:



Model: HT-1201

Color: Grey

Vibration acquisition: piezoceramic accelerometer (shearing type )

LCD display: three and a half digit display



Measurement range:

Acceleration: 0.1-199.9m/s2 (peak value)

Speed: 0.1-199.9mm/s (effective value)

Displacement: 0.001-1.999mm (effective value)

Measurement accuracy: ±(5%+2digits)



Frequency range:

Acceleration: 15Hz - 1KHz (LO), 1KHz - 10KHz (HI)

Speed: 15Hz - 1KHz (LO)

Displacement: 15Hz - 1KHz (LO)

Temperature measurement 0℃ - 60℃

Temperature accuracy: ±2℃

Automatic power-off time: 4 minutes

Power supply: 3 x AA battery (NOT included)

Operation temperature: 0℃ - 45℃

Operation humidity: 20%RH - 90%RH(No condensation)

Storage temperature: -20℃ - 60℃

Size: Approx. 150*70*32mm/5.9*2.8*1.3inch

Weight: Approx. 737g / 26oz



Package List:

1 x Vibration Meter

1 x Probe

1 x Handle

1 x Plastic Box

1 x User Manual



Note:

Don't dismantle the casing of the instrument.

Don't use the device in the environment with explosive gas, steam and damp environment.

When measurement is carried out near rotating part of the machine, operate carefully to avoid being pulled into the machine.

Please use dry cloth to wipe the instrument case at the time of cleaning.

Don't use corrosive detergents.

Please take out the battery if the instrument is not in use for a long time or the storage temperature is higher than 50℃ to avoid corrosion to the instrument due to battery leakage.

Please allow small size error due to manual measurement. Thanks for your understanding.

• 【Widely Used】Digital Vibration Meter Tester adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
• 【Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement, press the probe against the measured objects perpendicularly.
• 【Parameter Reference】Measurement range: acceleration: 0.1-199.9m / s2 (peak value), speed: 0.1-199.9mm / s (effective value), displacement: 0.001-1.999mm (effective value), measurement accuracy: ± (5 % + 2digits), temperature accuracy: ± 2 ℃, frequency range and other parameters have been listed in the description, please confirm the parameters before buying.
• 【Vibration Meter Tester】Vibrometer Gauge adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, It can measure the vibration speed, acceleration, displacement.Automatic power-off time: 4 minutes.Vibration acquisition: piezoceramic accelerometer (shearing type )
• 【Easy to Used】The backlight starts automatically after power on. Hold down "Enter" key to turn on/off the back light.During the measurement process, press "Esc/Max" key, the screen displays "MAX", indicating that the function is enabled. The top of the screen always displays the maximum reading. Press the "Esc/Max" key again to close the functions. When the vibration frequency exceeds 1KHz, it will switch to acceleration measurement automatically and display high frequency prompt.

User questions & answers

Question:	Buenos días, este equipo mide los tres ejes X, Y y Z
Answer:	It can only measure the X or Y axis individually; it can also be measured if the measured object is moving in the Z axis direction

Product description

Specification:

Vibration Pickup:Piezoelectric Ceramic Accelerometer(shear-type)

Acceleration:0.1~199.9m/s²

Velocity:0.1~199.9m/s

Displacement:0.001~1.999mm

Acceleration Frequency Range: 10HZ~1KHZ(LO); 1KHZ~15KHZ(HI)

Velocity Frequency Range:10HZ~1KHZ

Displacement Frequency Range:10HZ~1KHZ

Accuracy:±5%H±2digits

Power: 9VDC battery（not included）

Size:70 * 35 * 100mm / 2.8 * 1.4 * 3.9in

Weight: 1000 g / 35.3 oz(approx.)

Package list:

1 x Vibration Analyzer Tester（battery not included）

1 x instructions

3 x probe

1 x Aluminum case

1 x Split probe

• ✦ FUNCTIONS---Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery, specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
• ✦ ACCURATE MEASUREMENT---The vibrometer use the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation.
• ✦ WORKING PRINCIPLE---Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.
• ✦ WIDE APPLICATION---Widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc.
• ✦ FEATURES---Multi-functional, with temperature measurement, auto switch range, backlight, auto power off.

Product description

Specification:

Type: Vibration Switch Detection Sensor Module

Length: 45mm

Width: 10mm

Height: 15mm

Package includes: 1 x 3-Pin 801S new Vibration Switch Detection Sensor Module

Scope of application: it can be used in anti-theft device, electronic lock, vibration detection of mechanical equipment, target center counting detection and other occasions.



Features:

1. With TTL level signal output indication

2. Single channel signal output

3. The output effective signal is high level, and the indicator light is off

4. The sensitivity is adjustable (fine adjustment)

5. The range of vibration detection is wide without directionality

6. With mounting hole, the installation of firmware is flexible and convenient

• Length: 45mm; Width: 10mm; Height: 15mm
• Main chip: LM393, vibration probe, adjustable sensitivity
• Working voltage: DC 3-5V
• It has signal output command, TTL level signal and analog output signal
• Scope of application: it can be used in vibration testing occasions such as burglar alarm, electronic lock, mechanical equipment vibration detection, range target center counting detection, etc

Product description

The STEELMAN ChassisEAR or EngineEAR Combination Kit allows the user to detect squeaks and rattles features the EngineEAR electronic stethoscope and the ChassisEAR under chassis noise and vibration finder. The STEELMAN ChassisEAR allows user to listen to up to six different locations in one road test and hear noises that cannot be duplicated in the stall. Professional headphones shut out surrounding sound. Six color coded, super sensitive microphone clamps attach to the problem area with 16-foot wire leads that can reach to all vehicle locations. Clamp the six sensors on to springs, torque rods, shocks, body mounts, brakes, dash assembly, door hinges, drive train, rear or front axle, transmission, transfer case, suspension, sway bars, tie rod ends, struts, axle hubs, ring and pinion bearings, mufflers, catalytic converter, O2 sensor, oil pump or even an un-torqued bolt. The EngineEAR functions as an electronic stethoscope and can be used under the hood, along windows etc.



STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.

• 6 color coded, clamps with ultrasensitive piezoelectric sound pickups to attach to the problem areas with 16 ft. wire leads that can reach most location on vehicles
• Professional noise-cancelling headphones to block out surrounding environmental noise to help isolate the problematic issue
• Electronic stethoscope with included metal sound probe allows user to pinpoint mechanical issues with accuracy
• Clamp the six sensors on to springs, torque rods, shocks, body mounts, brakes, dash assembly, door hinges, drive train, rear or front axle, transmission, transfer case, suspension, sway bars, tie rod ends, struts, axle hubs, ring and pinion bearings etc.
• Stethoscope includes a decibel meter with 7 sound level control settings from 60 db. to 120 db.

User questions & answers

Question:	Is this a wireless system
Answer:	Thank you for your question! The Steelman 06608 ChassisEAR/EngineEAR II Combination Kit is not a wireless system. It is designed with six color coded, super sensitive microphone clamps attach to the problem area with 16-foot wire leads that can reach to all vehicle locations. Please let us know if we can be of any further assistance!
Question:	is there a video of this product Steelman
Answer:	Thank you for taking the time to reach out to us! Unfortunately, at this time, we do not have any videos that we have created regarding the use of the Steelman 06606 ChassisEAR/EngineEAR Combination Kit. We do have this request in process, but do not currently have any ETA available. If you have any further questions or concerns please feel free to reach out to us directly at [email protected].

Product description

The Vibration Calibrator is a small, self-contained handheld shaker, designed for quick and easy checking of accelerometers, vibration monitoring systems and recording systems. Provides known and controlled RMS vibration for verification of accelerometers weighing up to 150g.

 

Features:

• CE compliant and user friendly
• Light in weight and easy to carry
• Drives vibration sensors up to 150g
• For vibration acceleration, velocity and displacement
• Supplied with carrying case, allowing convenient handling and safe transport

Specifications:

• Operating Frequency: 159.2Hz ±0.5%
• Acceleration Output: 14.14m/s²(Peak) ±3%
• Velocity Output: 10mm/s(RMS) ±3%
• Displacement Output: 28um(Peak-Peak) ±4%
• Transverse Output: <5%
• Distortion: <3%
• Maximum Load: 150g
• Operating Temperature: -10~40°C
• Operating Humidity: 85% RH (non-condensing)
• Ramp-Up Time: <3second
• Power Supply: 4x1.5V AA battery
• Size: 56 x 200 mm
• Weight: 960g (battery included)

Set Includes:

• 1 x Vibration Calibrator
• 1 x Screwdriver
• 1 x English Instruction Manual
• Carrying Case

• Operating at 159.2Hz ±0.5%, drives vibration sensor up to 150g, 10mm/s(RMS) ±3% Velocity Output, 14.14m/s²(Peak) ±3%, Acceleration Output, 28um(Peak-Peak) ±4% Displacement Output
• QUICK AND EASY. Compact, self-contained handheld shaker designed for quick and easy checking of accelerometers, vibration monitoring systems and recording systems
• HIGHLY RELIABLE. It ruggedness will allow many years of use if proper operating techniques are followed
• INTERNATIONAL CERTIFICATION. CE compliant. Complied with European International Standard
• MOBILITY. User friendly, lightweight and easy to carry

Product description

Description:

1.Non-directional,turning on by any touching off angle.

2.Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

3.Features high sensitivity, sealed package, good performance and reliable.

4.In silent surroundings it keeps on turning off state with any angle, When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on state for a short time the electric character will be changerd, as the outside force disappears, it restores the turning off state.



Specification:

Product Name: Vibration Switch

Model Number: SW-18010P

Sensitivity: High Sensitivity

Max.Voltage: 12V

Rated Thermal Current: 5mA

Insulation Resistance: 10M ohm

Max.Temperature Resisting: 100℃

Pin Size: 9mm x 0.6mm(L*D)

Body Dimension: 15mm x 4.8mm(L*D)



Package Content:

10 x Vibration Switch

• Model Number: SW-18010P; Sensitivity: High Sensitivity; Max.Voltage: 12V
• Rated Thermal Current: 5mA; Insulation Resistance: 10M ohm; Max.Temperature Resisting: 100℃
• 【CHARACTERISTICS】Non-directional,turning on by any touching off angle.
• 【ADVANTAGE】Features high sensitivity, sealed package, good performance and reliable.
• 【APPLICATION】Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

Product description

Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

• Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
• Consistent data quality at both low and high frequency ranges
• Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
• Exportable data via USB
• Trending in Microsoft Excel using pre-built templates

User questions & answers

Question:	Does it come with calibration certificate
Answer:	Hello the Fluke-805FC does not come with a certificate of calibration.
Question:	Can this be used to measure ground disturbances of heavy machinery
Answer:	The 805 probably won't be sensitive enough to measure this.
Question:	What's included with meter
Answer:	The meter includes batteries, carrying case, holster to attach the meter to a belt and a USB cable.

Product features

Fluke 805 FC Vibration Meter

The fast, easy-to-use Fluke 805 FC Vibration Meter eliminates the confusion of vibration screening so you can make go or no-go maintenance decisions with confidence. Frontline mechanical troubleshooting teams have a highly reliable, repeatable and accurate way to check bearing and overall machine health. Instantly upload your data to the Fluke Connect app and share vibration measurement results with your maintenance team in real time - all without leaving the field.

Use the Fluke 805 FC to check machines in these categories:

- Chillers.

- Fans.

- Cooling tower drives.

- Centrifugal pumps.

- Positive displacement pumps.

- Air compressors.

- Blowers.

- Machine tools.

See it. Save it. Share it. All the facts, right in the field.

Fluke Connect with ShareLive is one of the wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products—the largest suite of connected test tools in the world. And more are on the way. Go to the Fluke website to find out more.

Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.

Fluke 805 FC with Crest Factor + takes the confusion out of bearing assessment

The original Crest Factor is used by vibration analysts to identify bearing faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal.

A key limitation of using Crest Factor to identify bearing faults is that the Crest Factor does not increase linearly as the bearing degrades. In fact, the Crest Factor can actually decrease as a bearing nears catastrophic failure due to large RMS values.

In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor+ (CF+). CF+ values range from 1 to 16. As the bearing condition worsens, the CF+ value increases. To keep things simple, Fluke has also included a four-level severity scale that identifies the bearing health as Good, Satisfactory, Unsatisfactory or Unacceptable.

Exporting and Trending with the 805 FC

Trending, or repeated vibration measurements kept in a spreadsheet over time, allows you to better track machine health. With 805 FC you can easily:

- Export your result to Excel through USB connection.

- Trend the readings with the pre-built Excel templates and plot graphs.

Import measurements from the 805 FC Vibration Meter to an Excel template on your PC in order to trend the bearing parameters: overall vibration, CF+, and temperature. Looking at just the number alone for the overall vibration or temperature might not be of much benefit to the operator or technician if they don’t know what the number means. The user may not know what is normal or what indicates a problem.

If measurements taken on the operator rounds are easily loaded into Excel, then the trend will show patterns of something that is becoming abnormal. The user can now see a clear picture of the changing bearing condition and deteriorating health of the machine.

Screen with the Fluke 820-2 LED Strobscope

- Quickly ‘freeze’ moving machines or processes without shut-down.

- Visually screen for potential problems before failures occur.

- Identify part numbers, flaws, timing problems, slippage, etc.

- Four simple buttons.

- Rugged, compact, easy to use – take it in your tool bag.

- Hundreds of industrial uses.

Find errors in work process:

- Control synchronization.

- Investigate meshing / timing.

- Control manufacturing process.

- Observe passer marks.

- Check automation processe.

Screen with the Fluke 805 FC Vibration Meter

- Easily added to operator rounds to give early warning of impending failures.

- Like a nurse checks your vital signs, screens machine health - 3 simple tests.

- Built-in database from 37 machine types.

- Optional external sensor for tight places.

- Reports: Fluke Connect & Excel template.

- Five tools in one – 3 readings + 2 severity scores.

Diagnose with the Fluke 810 Vibration Tester

- Just like a doctor that diagnoses most problems without the need to see a specialist—90 % of machines are standard motors, pumps, fans, compressors, blowers, gears, belts that have very few variables.

- A proven auto diagnostic program based on 30 years of machine baselines to analyze machines for you and get you back to work.

- A simple three step process provides machine condition answers without difficult analysis.

Correct with the Fluke 830 Laser Shaft Alignment Tool

- Intuitive guided user interface for quick and complete alignments without extensive alignment education or complicated programs.

- All-in-one screen with 4-level severity scale, misalignment values, and feet corrections needed to quickly correct misalignment.

- See the benefits of precision alignment on most of your machines not just a few.

Product description

Application:

Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.

Features:

In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.

Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.

Individual high quality ccelerometer for accurate and repeatable measurements.

Optional headphones for use as electronic stethoscope.

Bearing condition monitoring function.

Use “USB data output” and “RS-232 data output” to connect with PC.

Provide “Bluetooth data output” choice.

Specification:

Sensor:Piezoelectric Accelerometer

Measuring Range:Velocity: 0.01~200 mm/s True RMS

Frequency Range:Velocity: 10 Hz ~ 1k Hz

Accuracy:< 5 %

Analogue Output:AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)

Max. Value Hold

Power Off:Manual Power Off or Auto Power Off

Battery Indicator:Low Battery Indicator

Data Output:USB, RS-232, Bluetooth

Operating Conditions:Temperature: 0~50 °C

Power Supply: 4 x 1.5V AA size (UM-3) Battery

Dimensions:160 x 68 x 32 mm

Weight: 181 g (Not Including Batteries)

User questions & answers

Question:	What the package contain
Answer:	-
Question:	Please sensor is not magmatic at all, what’s the cause and how can I overcome this problem
Answer:	Until now there is no problem for me
Question:	Does it measure acceleration
Answer:	It simply shows mm/s measurement. There is an on/off switch and a hold button. No other special functions.
Question:	How does this attach to the item you want to measure vibration from
Answer:	It is goods instrument to measure electrical motor and other in my company. Nice tool

Product description

Description:

1.Non-directional,turning on by any touching off angle.

2.Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

3.Features high sensitivity, sealed package, good performance and reliable.

4.In silent surroundings it keeps on turning off state with any angle, When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on state for a short time the electric character will be changerd, as the outside force disappears, it restores the turning off state.



Specification:

Product Name: Vibration Switch

Model Number: SW-58010P

Max.Voltage: 12V

Rated Thermal Current: 5mA

Insulation Resistance: 10M ohm

Max.Temperature Resisting: 100℃

Pin Size: 3.2mm x 0.9mm(L*D)

Body Dimension: 9mm x 3.2mm(L*D)



Package Content:

10 x Vibration Switch

• Model Number: SW-58010P; Max.Voltage: 12V; Rated Thermal Current: 5mA
• Insulation Resistance: 10M ohm; Max.Temperature Resisting: 100℃
• 【CHARACTERISTICS】Non-directional,turning on by any touching off angle.
• 【ADVANTAGE】Features high sensitivity, sealed package, good performance and reliable.
• 【APPLICATION】Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

Product description

Description:

1.Non-directional,turning on by any touching off angle.

2.Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

3.Features ordinary sensitivity, sealed package, good performance and reliable.

4.In silent surroundings it keeps on turning off state with any angle, When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on state for a short time the electric character will be changerd, as the outside force disappears, it restores the turning off state.



Specification:

Product Name: Vibration Switch

Model Number: SW-18020P

Sensitivity: Ordinary Sensitivity

Max.Voltage: 12V

Rated Thermal Current: 5mA

Insulation Resistance: 10M ohm

Max.Temperature Resisting: 100℃

Pin Size: 10.5mm x 0.6mm(L*D)

Body Dimension: 11.5mm x 4.5mm(L*D)



Package Content:

30 x Vibration Switch

• Model Number: SW-18020P; Sensitivity: Sensitivity; Max.Voltage: 12V
• Rated Thermal Current: 5mA; Insulation Resistance: 10M ohm; Max.Temperature Resisting: 100℃
• 【CHARACTERISTICS】Non-directional,turning on by any touching off angle.
• 【ADVANTAGE】Features ordinary sensitivity, sealed package, good performance and reliable.
• 【APPLICATION】Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

Product description

Description:

1.Non-directional,turning on by any touching off angle.

2.Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

3.Features high sensitivity, sealed package, good performance and reliable.

4.In silent surroundings it keeps on turning off state with any angle, When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on state for a short time the electric character will be changerd, as the outside force disappears, it restores the turning off state.



Specification:

Product Name: Vibration Switch

Model Number: SW-58010P

Max.Voltage: 12V

Rated Thermal Current: 5mA

Insulation Resistance: 10M ohm

Max.Temperature Resisting: 100℃

Pin Size: 3.2mm x 0.9mm(L*D)

Body Dimension: 9mm x 3.2mm(L*D)



Package Content:

30 x Vibration Switch

• Model Number: SW-58010P; Max.Voltage: 12V; Rated Thermal Current: 5mA
• Insulation Resistance: 10M ohm; Max.Temperature Resisting: 100℃
• 【CHARACTERISTICS】Non-directional,turning on by any touching off angle.
• 【ADVANTAGE】Features high sensitivity, sealed package, good performance and reliable.
• 【APPLICATION】Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

Product description

Description:

1.Non-directional,turning on by any touching off angle.

2.Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.

3.Features retarded sensitivity, sealed package, good performance and reliable.

4.In silent surroundings it keeps on turning off state with any angle, When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on state for a short time the electric character will be changerd, as the outside force disappears, it restores the turning off state.



Specification:

Product Name: Vibration Switch

Model Number: SW-18030P

Sensitivity: Retarded Sensitivity

Max.Voltage: 12V

Rated Thermal Current: 5mA

Insulation Resistance: 10M ohm

Max.Temperature Resisting: 100℃

Pin Size: 10mm x 0.6mm(L*D)

Body Dimension: 12mm x 4.5mm(L*D)



Package Content:

10 x Vibration Switch

• Model Number: SW-18030P; Sensitivity: Retarded Sensitivity; Max.Voltage: 12V
• Rated Thermal Current: 5mA; Insulation Resistance: 10M ohm; Max.Temperature Resisting: 100℃
• 【CHARACTERISTICS】Non-directional,turning on by any touching off angle.
• 【ADVANTAGE】Features retarded sensitivity, sealed package, good performance and reliable.
• 【APPLICATION】Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.