12 best dac for computer

• Three Digital Inputs
• Asynchronous USB
• 24-bit/192k Support
• Wolfson DAC
• Dramatically improves sound quality and reduces distortion

User questions & answers

Question:	With this device get optimal dolby pro logic source material to my vintage av receiver from a vintage cd playe(analog) and my sony bdp s
Answer:	sure
Question:	what is the output voltage of the RCA outputs? (line level peak to peak
Answer:	Yes
Question:	Does this have balanced outputs
Answer:	It has a webcam. but not a touchscreen.
Question:	Can i use this device hook up my ipad pro and listen to amazon hd
Answer:	Not sure

Product features

Revolutionize Digital Audio

Lots of digital devices, like Blu-Ray players, TVs and PCs, have DACs built in, but often they leave much to be desired when it comes to sound quality. DacMagic 100 bypasses these inferior processors and decodes the digital audio itself to deliver a vastly improved sound.

High-Performance DAC

A Wolfson WM8742 DAC is at the heart of the DacMagic 100. This is where the magic happens, accepting playback of up to 24-bit/192kHz high-resolution digital audio files.

Connect Up to Four Devices Simultaneously

DacMagic 100 features 2x coaxial inputs, 1x optical input and 1x USB Audio input. Controls on the front panel let you switch between sources, so once you’ve connected up to four devices, you won’t have to worry about cables again.

TECH SPECS

• DIGITAL TO ANALOGUE CONVERTER Wolfson WM8742 24-bit DAC
• FREQUENCY RESPONSE 20Hz to 20kHz (±0.1dB)
• THD @ 1KHZ 0DBFS <0.0025% 24-bit
• THD @ 1KHZ -10DBFS <0.0025% 24-bit
• THD @ 20KHZ 0DBFS <0.0025%
• SIGNAL TO NOISE RATIO -113dBr
• TOTAL CORRELATED JITTER <130pS
• CROSSTALK @ 1KHZ < -130dB
• CROSSTALK @ 20KHZ < -112dB

• AK4493 DAC chips for the ultimate in decoding performance, supporting up to 768kHz/32bit and native DSD
• Equipped with XMOS XUF208 USB receiver chip+AKM AK4493 DAC+ Op-amps OPA1642 + flagship TI TPA6120
• Extremely powerful headphone amplification for a total power output of up to 1.5 W under a 32Ω load, and up to 20Vpp at 300Ω
• Multiple interfaces- headphone jacks(6.35mm) /RCA outputs+ USB Coaxial, Optical, and Line-in inputs
• More accurate ADC volume control +Gain and bass switches

User questions & answers

Question:	Do I need drivers for this to work properly
Answer:	If you have Windows 10, your computer will automatically download and install driver once you plug in the K5 Pro (and turn it on). However, I think this will limit to 24 bit and 192K. To get 32 bit and 768K, you will need to down load Fiio's own driver. Google "Fiio's Support" to find the driver.
Question:	Will this improve the quality of music streamed from Spotify? I currently have my sound card setting to 24bit 192khz
Answer:	No. Music streamed from Spotify will always be compressed. To really notice this Fiio DAC you will need a FLAC audio file and a good pair of headphones.
Question:	Would this would be an upgrade from the creative sound blasterx g
Answer:	That depends, the G6 is a clean sounding dac/amp, surprisingly good for a "gamer" oriented device, people think creative, gamer type device and think its junk without trying it, its actually very good. Its has a high quality dac and amp. If you're using the k5 pro or g6 for gaming, the g6 wins. The k5 has no mic input so that is a major issue especially on console, pain on PC. Also the G6 can easily drive headphones up to 300 ohm, i mean really push em hard. For music both are good, the k5 pro has more power so if youre only using it for music and you have 600 ohm headphones Then k5 pro all the way. I have both. I was using my k5 daily until I got my schiit hel, now i use the hel as its much simpler to keep it hooked to my PC for gaming and music. My G6 is hooked to my ps4. The difference in sound quality isnt big at all, and software for the g6 is really good, you can do so much with it and tweak the sound to your liking. With the k5 you're stuck with no software, you cant save different sound profiles to it. Even if creative SB stops support for G6, we still have the current software which is good and theres been zero need to update it. Unless you have high ohm cans, you will likely be disappointed going G6 to k5. If its just music or you don't need a mic, k5 pro is very good
Question:	What cables doni need to connect this to my PC
Answer:	To connect to your PC you only need the included USB-B cable (looks like a printer cable). You will also obviously need a power cable (also included).

Product features

AKM AK4493EQ DAC chips

The K5 Pro is equipped with AKM’s AK4493EQ DAC chips - known for its smooth, pleasant yet detailed sound due to its high signal-to-noise ratio and low distortion. Audio up to 768kHz/32 bit sampling rates and bit-depths are supported as well as native DSD

XMOS USB Audio

We elected to use the XMOS XUF208 microcontroller for its stability, powerful functionality, and its proven reliability.

Utterly precise volume control

When the NJRC NW1195A analog volume adjustment chip is paired with the combination of the flagship TI TPA6120 op-amp and the OPA1642 JEFT op-amp,the K5 Pro provides wonderfully smooth,yet high resolution sound.

ADC volume control

The use of ADC volume control can not only eliminate channel volume imbalances, but also allows the user to smoothly adjust the volume to a more accurate and finer degree to boost headphones of all kinds of sensitivity for a variety of listening needs.

All-aluminum black body

The all-aluminum black body has been painstakingly CNC-machined, anodized, and sandblasted to ensure that the K5 Pro feels robust yet perfectly textured for a great feel in your hands.

Gain switches

With the K5 Pro, you can switch between low ,medium and high gain levels (depending on how much driving power your headphone needs) .

Unique RGB status lights

With the K5 Pro,the RGB light indicator that surrounds the volume knob lights up with different colors,you can quickly identify the current sample rate.

48kHz and Below:Blue light flashing

48kHz and above: Yellow light flashing

DSD: Green light flashing

Getting precise with toggle switches

Both the input selection(USB DAC/SPDIF IN/LINE IN) and gain(Low 0db/Medium+6db/High+10db)so that it's easily for you to control your music

Versatility from multiple interfaces

Different connection options for different scenarios: Coaxial/Optical/RCA line-in +6.34mm(1/4 in.) headphone outputs/RCA line-out

Extremely Powerful headphone amplification

With the K5 Pro we have redesigned and further optimized the audio circuit to squeeze out every last drop of potential from the TPA6120, for a total power output of up to 1.5W under a 32ohm load,and up to 20Vpp at 300ohm.

Safe,Secure,and robust external power supply

The K5 Pro uses a DC 15V power supply designed to specifically minimize noise.This effectively suppresse power supply ripple and minimizes power supply crosstal betweek the two major sections of the sircuit,for a more stable and less noisy power that is crucial for outstanding sound for such a precisely-designed high preformance audio architecture.

Product description

The simplest model in the range, the third-generation Scarlett Solo provides singer-songwriters with a reassuringly easy recording process. Equipped with high performance 24-bit/192kHz AD-DA converters, Scarlett S the same professional sound quality throughout the third-generation range. Its features include a single upgraded third-generation Scarlett mic preamp: with a switchable air setting to reproduce the air effect of Focusrite's original ISA mic preamp, giving your vocal recordings a brighter and more Open sound. The high impedance, high-headroom instrument input allows you to record guitar or bass without any clipping or unwanted distortion, while gain Halo metering makes it easy for you to set the input level. And Scarlett Solo's balanced outputs are hum-free when connecting studio monitors with balanced inputs, so you’ll always have pristine audio playback. Scarlett Solo is designed to stand up to days on the road and connects straight to your Mac or PC via USB cable, with no external power required. It comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and pro Tools first Focusrite creative pack. Intuitive enough for beginners yet advanced enough to inspire real creativity with great-sounding effects. Focusrite has partnered with Splice to give 3rd Gen. Interface owners a free month Splice sounds subscription when setting a new Splice account. Splice sounds offers millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily from your favorite producers, sound designers, and artists. Creators use Splice to make all kinds of music, including chart-topping pop, Grammy-winning albums, underground mixtapes, and cinematic scores. As with all Focusrite products, you’ll also benefit from a two-year, award-winning customer support, and membership of their plug-in Collective offering free software downloads and generous discounts. Interested in what headphones are compatible with Scarlett? Search 'Headphones' on the Focusrite help centre for more information.

• One of the best performing mic preamps the Scarlett range has ever seen, now with switchable air Mode to give your recordings a brighter and more open sound. One high-headroom instrument input to plug in your guitar or bass. Two hum-free balanced outputs provide clean audio playback.
• High-performance converters enable you to record and mix at up to 24-bit/ 192kHz.
• Quick start tool to get up and running easier than ever.
• Includes Pro Tools | First Focusrite Creative Pack, Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 3-month Splice subscription, and your choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration
• LIMITED TIME OFFER: FREE Klevgrand DAW Cassette upon registration and download.

User questions & answers

Question:	Is the headphone jack on this for monitoring your inputs, or does your PC audio come through it aswell
Answer:	Hi, You can monitor your inputs and listen to playback from your computer simultaneously, which allows you to create overdubs with next to zero latency. You can either choose to monitor the inputs using the Direct Monitor switch, or you can use the Input Monitor feature in your DAW. If using the Direct Monitor feature the input signal will be passed directly to the line and headphone outputs, whereas if you use the Input Monitor feature in your DAW, you will be hearing the audio you're recording back from your DAW. In either case, you can still hear any other audio playing back from your DAW at the same time as recording. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	What type of usb cable does this come with? is it a type-c to type-c or a type-c to type-a
Answer:	Hi, This comes with a type-c to type-a cable. If you have type-c ports, you will need to purchase a type-c to type-c USB cable separately. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	Does the XLR input only record audio to the left side
Answer:	Hi, When recording a single microphone, you should ensure that you create a mono audio track in your DAW instead of a stereo audio track. When you record onto a mono audio track, the output from that track will be heard on both sides of your headphones or speakers (ensuring the output is set to stereo), however, if you record onto a stereo track, the audio will just be recorded onto the left side of a stereo file and you will ony hear it on the left of your headphones/speakers. This is explained in more detail here: https://support.focusrite.com/hc/en-gb/articles/206849779?flash_digest=62885ef974b4eb116f3b3ea2c9b9c38ddb871473 Best regards, Laurence Clarke // Focusrite Technical Support
Question:	can this power 250 ohm headphones
Answer:	I have a 650 , 300 ohm and it's enough to play it at okay volume but not enough to power it completed I'm looking at an Amp to pair this with

Product features

The perfect audio interface for a singer-songwriter

You’ve found the simplest USB audio interface we make. If you want to start creating studio quality recordings with your guitar, the 3rd Generation Scarlett Solo provides an easy way in.

• Easy to set up, no special software, app, or driver to install, a true plug-and-play digital audio adapter
• With USB, optical and coaxial S/PDIF inputs can fit with most home audio system, and RCA output can be connected to amplifier or powered speakers on your desktop; Built-in Hi-Fi headphone amp chip can drive most 16ohm to 200ohm headphones
• 160mW RMS(32 ohms, 20 Hz - 20 KHz, 0.01% THD), with bass and treble control can be used as preamp or volume controller for your PC/MAC/Computer
• Mini Compact D/A converter, stream bit-perfect 24bit/192KHz HD with low jitter, with output protect circuit, safe for your expensive audio system
• Come with 5V USB power supply cable, optical cable, USB type B cable and 18-month warranty; Full metallic shell to ensure high quality

Product features

Product description:

PC-USB supports input sampling rate: 96K/24Bit

High and low sound adjustment range: ±6dB

Fiber/coaxial support input sampling rate: 192K/24Bit

Frequency response: 20Hz-20kHz (±3dB)

PC-USB support operating system: XP/W7/W8/W10/MAC/linux

Distortion: 0.01%; SNR: ≥105dB

Amp output maximum power: 100mW 32Ω load

Headphone matching impedance: 16-200Ω

Working voltage: DC5V; RCA output level: 2.3V

Size (L*W*H): 73.5*98*33MM (without knobs and terminals)

Product description

5V PCM2704 Sound Card Decoding Module DAC Decoder Board for PC Computer USB Powered Features:

USB powered, analog output directly plugged into the computer's USB port, eliminating the need for connection

Main chip PCM2704 USB decoder chip HIFI level, the most commonly used chip CM102S series, the output can be directly connected to the headset, but also do pre- Digital outputs can be the DAC more advanced decoder provides SPDIF digital signals to obtain better sound quality due to the external sound card, within the enclosure to avoid serious electromagnetic interference, SNR and sound quality can be improved

PCM2704 is a monolithic digital-analog converter chip. It has two output channels and digital-analog converter with an integrated USB interface controller. Interface complies with USB1.1 standard. PCM2704 can receive 48KHz, 44KHz and 32KHz sampling rate, 16-bit stereo or mono audio data integration software chip volume and mute functions, can be synchronized adjust the volume and mute the computer

Specifications:

Supply Voltage: 5V (USB to take power)

Distortion: THD + N: 0.006% (RL>10k)

Distortion: THD + N: 0.025% (RL=32)

SNR: 98 dB

Dynamic Range: 98 dB

Earphone Output Power: 12mW (RL=32)

Supported Sample Rate: 16Bit 32k, 44.1k, 48k

Package Included:

1 x PCM2704 USB Sound Card DAC Decoder Board

• Supply voltage : 5 V (USB)
• PCM2704 Audio Sound Card DAC Decoder Module

• ✅【High Resolution Sound Performance】Support HD audio and provides clarity, separation, less muffling and more detail sound and an apparent volume boost from what was output straight from your laptop. Also improves the transparency and soundstage of the music even with MP3 files playback.
• ✅【Multiple Input Sources Selection】Select different inputs from USB, Optical Toslink S/PDIF and USB by using the push buttons conveniently located on the front with single-ended RCA outputs for connection to an outboard power amp or powered speakers.
• ✅【S/PDIF Output】S/PDIF output supports digital surround multichannel formats such as AC3 / DTS
• ✅【Make Your Headphones Sing】Built-in high-performace headphone amplifier (32 - 600 Ohm headphone impedance recommended), delivers clearer high, deeper bass and richer sound.
• ✅【Easy Plug & Play Operation】Easy to install between both Mac OS & PC Windows 10, just plug it into any USB port on your computer, HDTVs, game console, or any audio source player. NO additional driver downloads needed (currently only support IOS 12 version software or below for the iPhone/iPad device)

User questions & answers

Question:	Get it be used to amplify the sound on my home stereo speakers
Answer:	Yes. My spade connectors were on wide to fit into the center channel ermines on my AVR. These brought them out just past the AVR terminals.
Question:	Does the volume control affect only the headphone out, or both headphone out and rca out? (i would prefer the rca out to be a fixed level
Answer:	This is the 8 pack. It has labels for speaker and amp. You will want the 12 pack. Here is the link for the 12 pack of gold bananas https://www.amazon.com/Audioquest-SureGrip-100-BFA-Gold/dp/B011AAU5UI/ref=sr_1_1?m=A29BZ1S30D0GLZ&s=merchant-items&ie=UTF8&qid=1544895127&sr=1-1&keywords=suregrip Here is the link for the 12 pack bananas in silver: https://www.amazon.com/AudioQuest-SureGrip-100-BFA-Silver/dp/B01ERUR330/ref=sr_1_6?m=A29BZ1S30D0GLZ&s=merchant-items&ie=UTF8&qid=1544895127&sr=1-6&keywords=suregrip
Question:	Will this run on a lenovo 100e chromebook? Does anyone know of any dac/amps that will work with chromebooks
Answer:	Unscrew the red / black covers, then use the tool provided to loosen the screws on the banana. Twist your speaker wire tight (don't leave any stray strands) and insert the wire into the banana. Tighten the screws and make sure the connection is secure, then put the red / black covers back on. Plug in to your receiver and enjoy.
Question:	Can it be used to amplify the sound on my home stereo speakers
Answer:	For wire size up to 9 gauge. Allen wrench and Phillips screwdriver provided
Question:	Can i run this unit on a pc with just 1 usb cable or do i need the 2nd usb cable to be plugged into an outlet for power
Answer:	They fit snugly into the back of the speaker binding posts.
Question:	does it have line out
Answer:	Yes they can take 12 gauge wire.
Question:	Is the usb input comparable to connect to my iphone 11 using a usb c to lightning adapter
Answer:	The length of the banana itself is just under 1 inch. The diameter is the US standard measure of 4mm.
Question:	Can this unit be stack with the fiio m
Answer:	8 pieces, 4 for the amp, 4 for the speakers; if you are bi-wiring, you need 2 boxes
Question:	Is the enclosure black or silver (as shown in the second pic). mayflower website shows the enclosure to be black in color. can someone confirm
Answer:	Yes... as long as the two different speakers are in the same cabinet because the plug will obviously only plug into one panel mount. So yes you can and you'll only use one 4 wire cable to do it instead of having to use two separate two wire cable runs. I hope this helps.
Question:	will this make my ears bleed
Answer:	Only works if your amplifier has this NL4 Speakon connector. It also has to connect to a speaker that has a NL4 Speakon type connector. If your amplifier only has Banana Plug outputs you can buy an adapter that goes from Banana Plug to NL4 female.
Question:	headphones with 600 impedance
Answer:	The "4" in the nomenclature indicates that it is 4-pole. NL4 = 4 pole. I am adding a YouTube link that helps describe the wiring of the plug: https://www.youtube.com/watch?v=z_gzIz7dvgE Hope that helps.
Question:	What’s the difference between this model and the other mayflower model revB that is more expensive
Answer:	No, these are for bare wire, 4 conductor cables. These will not work with 1/4" cables

Product features

HP-DAC1 Application Scene

• USB will be the best connection for play the digital music file from your PC/Laptop (currently only support IOS 12 version software or below for the iPhone/iPad device), the digital audio signal will be passed to the HP-DAC1 to let it do the digital-to-analog converting and analog processing / output, provides clarity, separation, less muffing sound (Window & Mac OS are supported with No driver installation required)
• Optical digital connection will be the best option for connecting with AppleTV, PS4/Xbox game console, network audio player, digital media player, or Squeezebox. You will find the great detail and transparency sound quality.
• If the audio player doesn't have digital output, then the RCA analog inputs from the HP-DAC1 can be used to connect your audio devices, such as the CD player for warmer and smoother sound thru HP-DAC1's preamp stage.
• When you connecting the DAC with your amplifier or power speakers, you can connect it via the RCA Line Outputs, the DAC will act as a Pre-Amplifier to provide the good bass frequency and clear high/mid range sound.
• Built-in high-performance headphone amplifier (32-600 ohm headphone impedance recommended), drivers clearer high, deeper bass and richer sound.
• The volume control can adjust the output level for both Headphone and RCA Output (Once the headphone connection is used, there is no signal on the RCA output, the signal will simple mute analogue outputs when headphone jack is inserted)
• The S/PDIF Output is working with USB Input ONLY as a "digital-to-digital, USB to S/PDIF converter".

Multiple Input Sources Selection

The three different input source selection switches allow you to choose RCA Line In, USB or S/PDIF inputs, the bright blue LED that will actually light up the room in the dark.

Rotary Volume Control

The rotary control knob allows you to change volume whatever device you need it to go to by turning smoothly.

Digital-to-Digital Converter

The S/PDIF Output is working as a Decoder via USB Input playback ONLY for the audio signal pass-through as a "digital-to-digital, USB to S/PDIF converter", and supports digital surround multichannel formats such as AC3 / DTS pass-through

• STURDY AND DURABLE - Impact resistant material. Big blocks, stable 3-leg triangle structure
• HEIGHT ADJUSTABLE - 2.25”, 3.5” or 4.75”. Easy adjustment for ergonomically comfortable viewing
• EASY TO ASSEMBLE – No tools required. Assembly only takes a few seconds
• DESK ORGANIZER - Storage space underneath for keyboard, game console etc. Cable clip included
• PURCHASE WITH CONFIDENCE - TAA compliant. 30% recycled material. 1-year manufacturer’s

User questions & answers

Question:	Has anyone used this as a riser for a canon mx922 all-in-one printer, copier, scanner, fax machine, and if so, how's the fit
Answer:	I have and bought two to rise my flat screen tv. It worked perfectly and very sturdy. I also like the little cubby holes underneath. Only problem is that I had to put one of legs somewhere else one one of them cuz it didn’t fit my xbox one. Hope this helps.
Question:	Can you get extra risers
Answer:	Yes you can: https://www.amazon.com/dp/B075Y2LTKS/ref=sspa_dk_detail_1?pd_rd_i=B00F0OQ8VG&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExSUM1NE5VUTBQTzc3JmVuY3J5cHRlZElkPUEwOTQyMTM2MjRBT0hSN0I2NThXMiZlbmNyeXB0ZWRBZElkPUEwMTkwNjUzM0xZMFEwRFBNMlg4VSZ3aWRnZXROYW1lPXNwX2RldGFpbF90aGVtYXRpYyZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
Question:	can this hold a 32 inch computer monitor led
Answer:	I have a 27 inch curved screen. It would hold a 32 inch, but the monitor would extend over the ends of riser.
Question:	What is the exact width measurement between the two side legs
Answer:	Rectange - 10" Triangle - 15" long side Ultra Wide - 18.5"

Product features

Step 1

Step 2

Step 3

Adjusted to 4-3/4 inches

Adjusted to 3-1/2 inches

Adjusted to 2-1/4 inches

STURDY SUPPORT

The heavy duty DAC Stax monitor stand is designed to accommodate monitors, laptops, printers, fax machines, game consoles etc.

• STURDY AND DURABLE - Impact resistant material. Big blocks, stable 3-leg triangle structure
• HEIGHT ADJUSTABLE - 2.25”, 3.5” or 4.75”. Easy adjustment for ergonomically comfortable viewing
• EASY TO ASSEMBLE – No tools required. Assembly only takes a few seconds
• DESK ORGANIZER - Storage space underneath. Cable management clip to keep wires in place
• PURCHASE WITH CONFIDENCE - TAA compliant. 30% recycled material. 1-year manufacturer’s warranty

User questions & answers

Question:	Can this be used with 4 risers for more height
Answer:	3-piece Riser Leg Block Kit (ASIN: B075Y2LTKS) can be used to add an extra layer to this monitor riser. https://www.amazon.com/gp/product/B075Y2LTKS/ref=ask_ql_qh_dp_hza?th=1
Question:	Are these stackable
Answer:	You can simply put one on top of the other, but the two monitor risers won't be connected.

Product features

Step 1

Step 2

Step 3

Adjusted to 4-3/4 inches

Adjusted to 3-1/2 inches

Adjusted to 2-1/4 inches

STURDY SUPPORT

The heavy duty DAC Stax monitor stand is designed to accommodate monitors, laptops, printers, fax machines, game consoles etc.

Top

Bottom

Package

Product description

The GSX 1000 Audio Amplifier is a dynamic gaming amplifier with HD Audio and 7.1 surround sound modes, and separate audio and communication control. Designed for the gamer seeking enhanced audio to better enjoy their games, the amplifier delivers exceptional bass performance, acoustic clarity and precise positional audio cues for an immersive game experience. Intuitive design of the LED touch panel and volume ring allow for quick fingertip control of your sound. Adjust game and chat audio separately and even control the loudness of your own voice in the headset. Compatible with both the PC and Mac® with all 2-jack analog headsets, a built-in DAC and EQ presets serve the gamer as well as the movie lover. Four profile settings allow you to personalize and save your favorite audio settings.

• BINAURAL RENDERING ENGINE WITH 7.1 SURROUND - The proprietary high-tech audio engine delivers exceptional spatial awareness and positional game audio. Delivers the game audio details and positional audio cues.
• QUICK SETTING CHANGES – save up to 4 customized sound settings on the LED touch panel that allows one-touch mode switch, also between headphone and speaker listening and make fast adjustments with a large aluminum volume Ring
• EQ SETTINGS – Get precise control of your game audio with a dedicated DAC chip and EQ presets. Specially attuned audio presets for competitive gaming focus and balance sound frequencies where they are needed
• SIDETONE - Sidetone control lets you adjust the loudness of your own voice in your headset: you know what you are saying, tune in to your teammates.
• GAMING DAC – Get precise control of your sound with a dedicated DAC chip that requires no additional drivers, for easy setup. Just plug and play.
• SPATIAL AWARENESS – Reverberation level control changes the spatial feeling from small rooms to open spaces, adding to the gaming immersion.
• MICROPHONE CONTROL - Control and adjust your outgoing mic volume, using the smart microphone volume control on the side of the GSX 1000.

User questions & answers

Question:	Does it need driver installed for it with PC Windows
Answer:	I do not know if it is waterproof but it is very sturdy and looks very well insulated.
Question:	Does this have zero latency voice monitoring
Answer:	Almost non. Very very little.
Question:	How is this different from turning on the surround sound option in my high quality sound card
Answer:	It has a small tab you lift up on and spin the cartrage. I alwsys put alittle extra grease around the cartrage o ring.... makes removing easier next time
Question:	Will these work with the HyperX revolver
Answer:	about 6 feet

Product features

Take your game to new levels

The GSX 1000 Audio Amplifier is a dynamic gaming amplifier with HD Audio and 7.1 surround sound modes, and separate audio and communication control. Designed for the gamer seeking enhanced audio to better enjoy their games, the amplifier delivers exceptional bass performance, acoustic clarity and precise positional audio cues for an immersive game experience.

Binaural Rendering Engine – 7.1 surround

The proprietary high-tech audio engine delivers exceptional immersion with enhanced audio performance. Deep bass extension, acoustic clarity and precise accuracy deliver the game audio details and positional audio cues for instant reaction and an immersive game experience.

Dedicated built in DAC

Get precise control of your sound with a dedicated DAC chip. No need to buy a separate DAC or download additional drivers, the built-in dedicated DAC chip does it all.

Intuitive LED Panel

Switch between audio modes and speaker/headset without exiting the game with a single touch on the intuitive LED Panel. The integrated LED display and volume ring shows your sound level and allows easy finger-tip control.

Settings lock

The LED Panel is sensor activated for quick settings change - hover your hand over the panel and it activates. To prevent accidental changes, a settings lock is also provided. Don’t let your pet, child or an inadvertent touch accidentally change your audio settings in the middle of play.

Customizable audio settings

Specially attuned audio presets – story, music, esports and neutral – focus and balance sound frequencies where they are needed, and act as a starting point for your own custom profiles. Set reverberation level to your preference for precise spatial awareness.

Separate control for game audio and chat

Separate controls for game audio and chat allows you to cut through the noise for communication when needed for on-the-fly strategizing with your teammates. Sidetone lets you control the loudness of your own voice in your headset: you know what you are saying, tune in to your teammates.

Product description

Designed for the driven team gamer, up to eight GSX 1200 PRO Audio Amplifiers can be connected together for the ultimate in hard-wired lag-free communication and control of inbound and outbound chat. An inbound microphone gain wheel and separate control of the loudness of your own voice in your headset delivers focus on game chat for on-the-fly strategy discussions. A proprietary 7.1 Virtual Surround Algorithm developed for competitive gamers provide the ultimate in spatial awareness and positional gaming audio. Precise control of both game and chat audio is provided by separate adjustment of – and one touch switching – between headphones and speakers. Lock your audio configurations settings to prevent accidental changes and dominate with precision audio cues and ultimate audio control. Perfect for tournament play.

• BINAURAL RENDERING ENGINE WITH 7.1 SURROUND - The proprietary high-tech audio engine delivers exceptional spatial awareness and positional game audio. Delivers the game audio details and positional audio cues.
• LINK UP YOUR GSX 1200 PRO EXTERNAL SOUNDCARD - Daisy chain up to eight amplifiers together for the ultimate in lag-free team communication. Hard-wiring the external soundcards together creates a direct communication link to your team
• SEPARATE CONTROL FOR GAME AUDIO AND CHAT – Separate controls for game audio and chat allows you to cut through the noise when needed for precise on-the-fly collaborative team communication when daisy chained
• EQ SETTINGS – Get precise control of your game audio with a dedicated DAC chip and EQ presets. Specially attuned audio presets for competitive gaming focus and balance sound frequencies where they are needed
• GAMING DAC – Get precise control of your sound with a dedicated DAC chip that requires no additional drivers, for easy setup. Just plug and play.
• SPATIAL AWARENESS – Reverberation level control changes the spatial feeling from small rooms to open spaces, adding to the gaming immersion.
• SIDETONE - Sidetone control lets you adjust the loudness of your own voice in your headset: you know what you are saying, tune in to your teammates.

User questions & answers

Question:	Does it work with the Game one headset? Also does it need any software to be tweaked
Answer:	Hi Jay R.Thanks for your enquiry.Sorry that this item cannot power mic. It cannot work for the mic that needs large power.Thanks for all your support to Ugreen.Any more information, please contact us with support.us@ugreen.com.cn.Best Regards,Ugreen Customer Care Team
Question:	Does it support ps4 with mic function via usb connection
Answer:	I'm afraid you cannot.
Question:	Does this act as a soundcard or do you have to pipe the audio from your soundcard to this device? Why would I need this
Answer:	Yes you are able to do so
Question:	Difference between this and the gsx
Answer:	What TV? Most USB ports on HD TVs are for (1) powering auxiliary devices, or (2) mass storage of movies, photos. It most likely does *NOT* provide any audio signaling output.

Product features

GSX 1200 PRO

Designed for the driven team gamer, connect up to eight GSX 1200 PRO Audio Amplifiers for some of the best in class hard-wired lag-free game chat. Separate control of inbound and outbound chat delivers precise team communication for on-the-fly strategy discussions. Our 7.1 Virtual Surround Algorithm delivers the ultimate in spatial awareness and positional gaming audio. One-touch mode switch to select between audio profiles and speaker/headset provide precise control of both game and chat audio.

Binaural Rendering Engine – 7.1 surround

The proprietary high-tech audio engine delivers exceptional spatial awareness and positional game audio. Deep bass extension, extreme acoustic clarity and precise accuracy deliver the game audio details and positional audio cues for instant reaction and an immersive game experience.

Link up your GSX 1200 PRO Amplifiers

Daisy chain up to eight amplifiers together for the ultimate in lag-free team communication. Hard-wiring the amplifiers together creates a direct communication link to your team and delivers precise, clear and instant team chat for strategizing through the most intense game action.

Separate control for game audio and chat

Separate controls for game audio and chat allows you to cut through the noise when needed for precise on-the-fly collaborative team communication

Built in DAC and EQ modes

Get precise control of your game audio with a dedicated DAC chip and EQ presets. Specially attuned audio presets for competitive gaming focus and balance sound frequencies where they are needed for the ultimate in audio detail, accuracy and game realism

Settings Lock

The LED Panel is sensor activated for quick settings change - hover your hand over the panel and it activates. To prevent accidental changes, a settings lock is also provided. Game organizers can also lock audio controls for both teams to create a level audio playing field.

Separate inbound/outbound chat control

Enjoy ultimate game communication control for team strategy discussions with a separate microphone output control wheel on the amplifier for outbound chat. Sidetone control lets you adjust the loudness of your own voice in your headset: you know what you are saying, tune in to your teammates.

Product description

Body { font-family: Verdana GENEVA sans-serif; font-size: 11px } TD { font-family: Verdana GENEVA sans-serif; font-size: 11px } FiiO K3 Type-C USB DAC headphone amp the FiiO K3 pocket-sized power flexibility headphone amplifier & USB-C DAC boost your computers sound with capable decoding equipped with an XMOS USB receiver chip The K3 is capable of decoding up to 384kHz/32-bit PCM and native DSD256 the same as many DACs costing much more. The k3s dual crystal oscillators ensure that any digital audio signal; being fed into the DAC are exactly correct for further enhanced sound quality. Just connect the K3 to your computer via USB to instantly upgrade to high-fidelity sound and enjoy your music The way it was meant to be heard. Highly optimized architecture for maximum potential The k3s well-thought-out internal design consists of two main layers working together perfectly in harmony. Digital processing is carried out by the high-performance AKM AK4452 with 32-bit velvet sound technology and fully differential outputs for true balanced output while the analog signals are handled and amplified by a design consisting of LPF/voltage amplification and a current drive circuit. Wash away the noise with low-distortion op-amps the combination of the proven OPA926 with its low-distortion low-noise and high output swing along with the professional-grade Ti OPA1612 acting as the low-pass filter (LPF) ensures the K3 effortlessly provides high resolving sound pumping out 320mW at 16ohm from the balanced output. Simply reliable USB power the K3 adopts the modern USB Type-C input interface for a more reliable and stable connection including that of power. However care to ensure an uncompromised power supply doesn't stop there the K3 implements overvoltage protection (OVP) and double-filter circuit to ensure power supply stability while the Digital and analogue audio circuits each get their own power supply to greatly reduce Crosstalk. No more channel imbalances with ADC vo.

• Features
• Usb Type-C DAC: supports up to 384kHz/32bit
• Power supply via the USB port: convenient and safe
• Various ports: lineout single-ended/ balanced headphone output coaxial and optical
• High-performance discrete headphone drive and circuit protection

User questions & answers

Question:	Usb C necessary
Answer:	No you cannot nor can you use the mic in the headphones for making or recieving calls ...luckily you do get notification ...and you can just pull the lightning connector to answer the call ..using iphone in normal manner ..i had this exact Q after recieving my unit ..
Question:	Will the k3 be enough for the beyerdynamics dt 990 250 ohm
Answer:	In performance, both models incorporate the 32-bit ESS Sabre DAC chip, the 9010 in Black and the higher-performance 9016 in Red. While the Black uses the same headphone amp and analog volume control found in previous version, the new Red includes the latest ESS headphone amp and a bit-perfect digital volume control that resides on the 9016 DAC chip itself. In power the Black puts out 1.2 volts: enough power to drive all preamplifier input circuits and a wide range of efficient headphones. The red with its higher 2.1-volt output will be compatible with a wider range of headphones, including power-hungry, low-efficiency model.
Question:	Does the knob control the Line Out volume on the K
Answer:	I hesitated to answer this question since it's about 4 years old now, but I'm sure somebody else will be wondering the same thing. I must say it's one of the most illogically comical questions that I've ever read. Let me explain. It's like asking if using jet fuel will improve the grass cutting performance of a lawnmower. Obviously, it won't. You just need a more efficient lawnmower. The DAC + preamp + plus headphone amp merely will make the headphones louder but NOT make them sound better. In fact, most low-cost headphones (in the $10 - $30 range) typically suffer from sibilance (hiss), muffled bass, tinny highs, too dominant mid-range, and distortion at higher volumes due to using low-quality components. Therefore, it's highly probable that the AudioQuest DragonFly will make cheap headphones sound exponentially worse. As the old saying goes: "You can't make a silk purse out of a sow's ear."
Question:	If both outputs are connected, one to headphones and the other to speakers for example, can I choose to have sound only in one of them at a time
Answer:	Yes, the Creative Sound Blaster Play! 3 features the 31 Hz band and +/- 24db choice.

Product features

FAQ

Drive Ability:16-150 Ω . Output Power 1(3.5mm headphone output):220mW(16Ω); 120mW(32Ω). Output Power 2(2.5mm headphone output):320mW(16Ω); 200mW(32Ω)

Can I connect the K3 with an iOS or Android device?

The K3 is a USB power and data combo interface，designed for desktop computers or laptop. Mobile devices are not recommended.

1. What does the K3 indicator mean?

The K3 uses RGB indicator; the USB power plug in, the power switch turn on, and red or yellow may be displayed in the non-playback state; The current audio quality can be indicated only in the normal playback state: 1, blue ≤ 48khz sampling rate2, yellow >48khz sampling rate3, green DSD format

2. Can I connect the K3 with an iOS or Android device?

The K3 is a USB power and data combo interface，designed for desktop computers or laptop. Mobile devices are not recommended.

3. Can the K3's coaxial and optical outpu work at the same time? And what sample rate are supported for the both outputs？

A:K3's coaxial and optical can output simultaneously with the headphone port, and is not subject to volume control. Coaxial can support up to 192k/24bit and DSD64 DOP output, while Optical can support up to 96k/24bit.

4. Why sometimes there is no sound when K3's coaxial and optical output is connected to the speaker?

A: When the PC player output device is set to "KS"or "ASIO", the sampling rate of K3's Coaxial and Optical output is followed by the tracks themselves. However, most speakers on the market with SPDIF input only support 48kHz sampling rate, so there will be no sound output. For this kind of use environment, it is recommended to set the output device to "DS" or "wave out" on the music program on your computer.

5. Can the K3's balanced headphone output and 3.5mm single-ended headphone output work at the same time?

A: The K3's balanced output has a higher priority than the 3.5mm single-ended(SE) Headphone out, so when the K3 is connected to both the 2.5mm balanced and 3.5mm SE headphones, only the balanced output port will output sound.

6. What is the difference between USB AUDIO 1.0/2.0 in K3? How to operate and make it work?

A: In order to meet the flexible use of K3, we have designed two modes. 1. USB AUDIO 1.0 does not need to install the driver, and please connect the K3 with the computer and then play songs directly. it could support up to 96k/24bit. 2. USB AUDIO 2.0 is required to install FiiO official driver firstly. The lastest DAC Driver is v4.47.0: on our website It could support up to 384k/32bit and DSD256. After the two modes are switched, you need to re-plug the USB or power the K3 on/off to make the USB AUDIO mode take effect.

Boost your computer's sound

Equipped with an XMOS U30881C10 USB receiver chip, the K3 is capable of decoding up to 384kHz/32 bit PCM and native DSD256.

Finest componets for maximum potential

The combination of high-performance AKM AK4452 DAC with low-distortion op-amps OPA926x2 and professional-grade LPF TI OPA1612 make up for a outstanding performance.

Modern USB Type-C input interface

The USB Type-C ensures a more reliable and stable connection. Moreover, the K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability.

Two modes of USB audio

In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding; For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers.

ADC volume control

The use of ADC volume control can not only eliminate channel volume imbalances, but also allows the user to smoothly adjust the volume to a more accurate and finer degree to boost headphones of all kinds of sensitivity for a variety of listening needs.

A tactile audiovisual experience

The volume knob, with 45° notches etched onto its surface and perfectly sized to allow easy one-finger operation. Next to the volume knob is an RGB light that indicates what kind of digital audio is being input to the K3.

Versatility from multiple interfaces

Different connection options for different scenarios: 3.5mm single-ended and 2.5mm balanced headphone jacks + 3.5mm line out + Coaxial and Optical digital outs

All-aluminum black body

The all-aluminum black body has been painstakingly CNC-machined, anodized, and sandblasted to ensure that the K3 feels robust yet perfectly textured for a great feel in your hands.

Product description

The D1 DAC is a perfect example of the extension of this mission. With music streaming services and digital music players becoming the centre of the modern music system, consumers have had to accept a loss of the premium components resulting in the loss of sound quality. Perfect for providing a higher quality audio signal to any speakers or headphones, the D1 is a high quality 24-bit DAC and headphone amplifier for your computer, TV, and any device with a USB port or Optical output. The D1 sets up in seconds with no software to download or setup hassle.

• The D1 is a premium 24-bit DAC and headphone amplifier for your computer, TV, allowing you to bypass your computer’s sound card or headphone output and send audio through USB or optical
• FEATURES High-performance DAC and headphone amp, USB and optical inputs, stream bit-perfect 24/96 HD audio, desktop or portable DAC, use with Mac or PC, no driver to install.
• WORKS WITH Mac, Windows, and Linux Computers—plug-and-play with USB. Any TOSLINK Optical connection from CD/DVD Players, TVs, and more! Powered speakers, Stereo/AV Receivers, and your favorite headphones.
• WHAT’S INCLUDED: D1 24-bit DAC/Headphone Amp, 2 foot USB cable, setup guide, microfiber bag.
• WARRANTY: Audioengine builds quality audio equipment that they stand behind. All Audioengine products come with a 3-year transferable warranty. Coverage: Stellar US based customer support and 3 year product coverage is included. Based in Austin, TX, Audioengine has been changing the way people listen to music since 2005. Our passion is creating products that sound great, are easy to use, and make people want to listen to music every day.

User questions & answers

Question:	I see the d1 has usb input. i don't have a sound card in my pc, do i still need to get one if i get d1 to improve the sound quality? thanks
Answer:	I think the answer is two part: (1) yes it will work with high resolution flac files, at least with my test over usb. I downloaded a test (24bit/352.8kHz) file and everything was fine. (2) As alx already stated, valid sampling rates are 32/44/48, so I believe down/up sampling will need to occur with other sources.
Question:	Does this DAC require LPCM or PCM in S/PDIF input signal. Most TV has option to output in PCM format but not all. My LG DU-37LZ30 has DTS/AC-3 output
Answer:	I'll test this when I get home. I haven't tried to use the toslink port on my DAC, but I'll follow up within the next five or six hours.Edit: I can only conclude that the USB connection is the only input and that the optical is out. I connected this unit via TOSLINK to my PC's optical port, and then connected the USB cable to a USB power adapter in a power strip to guarantee that no actual input is running over USB. After connecting headphones to the 3.5mm out jack and making my motherboard's optical jack the default device, I received no sound regardless of bitrate setting.I then unplugged everything and connected the USB cable to a computer instead of a power strip, making the computer's default playback device the USB DAC. I ran the TOSLINK from the Signstek DAC to a FiiO TAISHAN D03K TOSLINK to 3.5mm/RCA DAC and connected my headphones to the FiiO unit. As I type this, I'm listening to music from my computer using this configuration.It seems that the only use for this unit's optical jack is out, effectively allowing this to be both a USB DAC and a USB to TOSLINK adapter, bypassing its abilities as a DAC. Very handy if, for example, you have a laptop that lacks optical out and you have a pricey optical in-only DAC that you'd like to use with the laptop.That being said, if anyone can get this unit to behave as an optical in DAC, please let me know how you've done this. If I can replicate it, I'll happily edit my answer accordingly.
Question:	Will the analog outputs be bypassed if a headphone is connected at the same time
Answer:	The USB is the ONLY input for both power AND the digital audio signal passed from a USB device outputting a digital audio signal. The Optical and Coaxial are digital OUTPUTS to feed the digital input of another device or DAC. The Headphone and (L) (R) are analog outputs to feed the analog inputs of some kind of amplifier that then feeds speakers. If you can do without the optical digital output on this device, I suggest the slightly smaller Muse Mini USB DAC here : https://www.amazon.com/USB-DAC-PCM2704-Optical-Converter/dp/B0093KZTEA/ref=sr_1_4?ie=UTF8&qid=1482862640&sr=8-4&keywords=usb+mini+dac They have the same DAC chip and in my personal side by side comparison in my high-end desktop stereo setup I preferred the sound of the headphone outputs of the smaller unit to either the headphone or RCA outputs of the larger unit here. Yes, different implementations of the same chip sound different. Regards...
Question:	So Macs have good internal DACs, can someone comment on how much better this unit makes music sound while running off a Mac (I have a 2013 Mac Air
Answer:	Let the specs speak for themselves: FiiO E10 Specs Power Supply Standard Micro USB port Output Power 200 mW @ 32 Ω Sample Rate Maximum of 24-bit/96 kHz supported Signal to Noise Ratio ≥108 dB Digital Output 1x Coaxial digital output, stereo PCM format Frequency Response 20 Hz to 20 kHz Impedance Recommended Headphone Impedance: 16 to 150 Ω ATH-M50x Headphones Frequency Response 15 Hz to 28 kHz Sensitivity 99 dB Impedance 38 Ohms Maximum Power Handling 1600 mW

Product features

Desktop Digital-to-Analog Converter (DAC)

• Mac or PC plug-and-play, no drivers to install
• High-performance headphone amp included
• USB and optical inputs, RCA output
• USB-powered, no separate power supply needed
• Stream bit-perfect HD audio
• Based on high-performance AK4396 DAC
• Front panel volume control
• Process digital audio up to 24-bits and same rate up to 192kHz

Works With:

• Any computer (Mac or PC)
• Headphones
• Apple TV or any product with optical outputs
• Powered speakers
• Any audio system with mini-jack or RCA inputs

What's in the Box:

• 1x DAC
• 1x 0.6m USB cable
• 1x Cloth Travel Bag
• 1x Setup Guide
• 1x Brochure

PREMIUM 24-BIT DAC

Audioengine D1 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer’s soundcard or headphone output and send audio through USB or optical.

D1 will process digital audio at any bit depth up to 24 bits and any sample rate to 192kHz. With it’s high signal-to-noise ratio and low distortion, the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.

D1 is the perfect digital interface between your computer and music system and will improve the sound of ALL your music.

WHY YOU'LL LOVE THE D1 24-BIT DAC/ HEADPHONE AMP

The D1 is a premium 24-bit DAC and headphone amplifier for your computer, TV, and more.

“The new D1 is the perfect music “interface” between your computer and speakers or headphones.”

- c|net

"Just got the D1 and it’s one of the 5 best buys I’ve had in over 60 years of audio improvements to many systems. Great product. WOW!"

- DWB