12 best breadboards

User questions & answers

Question:	what is the spacing of the holes in the breadboard? 0.10" or 2.0mm
Answer:	I measured the boards I received, and the holes do NOT appear to be on 0.10" centers. I don't know what they are. They don't line up with 0.10" solder protoboards I have.
Question:	Does the black ink that shows column letters and row numbers smudge or rub off easily
Answer:	No, the ink seems to be pretty permanent. At least so far :)
Question:	can the power bus be removed from the rest of the breadboard
Answer:	Yes, both sides can be removed although cutting through the adhesive backing and adhesive can be a bit of a pain. You also have to remember to clear the space where the "ears" are so they slide apart easily.
Question:	Is the thru hole spacing sized for standard DIP packages
Answer:	Yes.
Question:	Does it matter that the caps in my tv are blue amd not black
Answer:	shouldn't matter as long as capacity (uF) is the same and the voltage (V) is >= to the caps you have. I think this brand is supposed to be pretty good quality.
Question:	So how do you use the then i do have a tv that is kind of broken that i could use them for but i thought i was buying them for a capacitor for my car
Answer:	This item are standard capacitors, not super/ultra capacitors. My use case was to solder all these capacitors together to smooth out the 12 volt output from my rectified landscape lighting style power transformer I use for my refrigerators (12/24 volt RV/sleeper truck compressor type). If you have a power source that you feel doesn't give you smooth enough DC electricity, splice these into the circuit and off you go. Just don't exceed the 25 volt rating, or you'll have some firecrackers instead.
Question:	Can i use this cap for dc volt
Answer:	Electrolyte capacitor are designed to be use only in D.C., if it get connected to A. C. it will burst open.
Question:	Can you tell me how tall they are
Answer:	13x20mm/0.51x0.79 inch

Product features

What is breadboard？

Breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate.

The breadboard has strips of metal underneath the board and connect the holes on the top of the board. Note that the top and bottom rows of holes are connected horizontally and split in the middle while the remaining holes are connected vertically.

The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color.

The Breadboards is 2-Sided Peelable Adhesive Tape，Easy to Stick on the Prototype Shield，Suitable for Line Prototype Design.

Product Features:

830 tie points breadboards: 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.

400 tie points breadboards: 300 tie-point ic-circuit area plus 2x50 tie-point distribution strips providing 4 power rails.

Wire size: Suitable for 20-29 AWG wires.

Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet.

Voltage / Current: 300V/3-5A.

Package includes:

2PCS 830 Tie-Points Breadboard

2PCS 400 Tie-Points Breadboard

• Highest Cost Components Kit: It comes with more than 400pcs sensors and components for fun and simple electronic projects.
• Safe and Secure Pakcage: Resistors/LED/Transistors and Integrated Circuits are individually packaged and labeled, and well-stored in a sturdy box
• The Breadboard Power Supply come with a USB Power Cables,which is hard to find.
• Datasheet and Tutorial are available to download from our official website or you can contact our customer service.
• Not including the controller board.

User questions & answers

Question:	What can I do with it
Answer:	Our Electronics Component Fun Kit is a set of components that can be used for various experiments, not limited to Arduino or Raspberry Pi.
Question:	What is the maximum current rating on the power supply module
Answer:	The Power Supply Module Maximum Output Current:
Question:	How many pieces are there in total
Answer:	It comes with more than 500pcs sensors and components for fun and simple electronic projects.
Question:	What are the voltage/amperage ratings for the LEDs included in the kit
Answer:	The voltage/amperage ratings are not marked on the LEDs. The only way to know would be to contact the manufacturer of the kit for further information. Sorry I wasn't more help.

Product features

The Breadboard Power Supply has two power modes:

1) M/M USB Power Cable（included in this kit）;

2) 9V 1A DC Adapter（Not included in this kit）.

Jumper Wires

Jumper wires can be used for pin extension of the experiment board, adding experimental items, and the like. It can be connected very securely to the pins, eliminating the need for soldering and allowing quick circuit testing.

Our kit includes 65pcs male to male jumper wires, 20pcs male to female dupont wires, and 140pcs solderless jumper wires. which are completely adequate for various experiments.

IC 74HC595

The 74HC595 consists of an 8−bit shift register and a storage register with three−state parallel outputs. It converts serial input into parallel output so that you can save IO ports of an MCU. The 74HC595 is widely used to indicate multipath LEDs and drive multi-bit segment displays. "Three-state" refers to the fact that you can set the output pins as either high, low or "high impedance." With data latching, the instant output will not be affected during the shifting; with data output, you can cascade 74HC595s more easily.

IC 4N35

The 4N35 is a 4-terminal universal optocoupler that blocks the electrical connection between the signal source and the receiver of the signal, which effectively blocks electrical connections and interference. Commonly used in signal isolation transmission, switching power supply feedback control and so on. Common circuits include TV power supply parts (remote control switch, voltage feedback control), switching power supply, electric vehicle charger and many other aspects.

Buzzer

An active buzzer will generate a tone using an internal oscillator, so all that is needed is a DC voltage. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than producing a tone automatically.

To identify them, if you apply a DC voltage to them and it buzzes, it's an active.As far as commands go if you want to control the pitch, you would need a passive buzzer.

PN2222 NPN Transistor

The PN2222 can be used as a switch that use a little current from the R3 digital output to control the much bigger current of the motor. Because the small DC motor is use more power than an R3 digital output can handle directly.

1N4007 Diode

1N4007 Diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using a grey bar as shown in the picture above. For 1N4007 Diode, the maximum current carrying capacity is 1A it withstand peaks up to 30A. Hence we can use this in circuits that are designed for less than 1A. The reverse current is 5uA which is negligible.

Electrolytic Capacitor

Electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal.

Ceramic Capacitor

Ceramic capacitor uses a ceramic material as the dielectric. Ceramics were one of the first materials to be used in the production of capacitors, as it was a known insulator. Ceramic capacitors are usually made with very small capacitance values. Ceramic capacitors are also very small in size and have a low maximum rated voltage. They are not polarized, which means that they may be safely connected to an AC source. Ceramic capacitors have a great frequency response due to low parasitic effects such as resistance or inductance.

Product description

We have the manufacture factory,

making productions and selling by ourselves.

So we can control the quality of our productions by ourselves for you.

We’d like to receive your valuable suggestions for our products and make your idea come true.



830 tie points total. 200 in 2 power rails, 630 in a 30 x 10 matrix

White plastic, with black legend. Colored power rails

For wires 21 to 26 AWG

2-sided peelable adhesive tape



Component listing:

3pcs 830 tie-points breadboard

• 630 tie-point IC-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.
• White PP plastic body with black printed legend. Color legend on distribution strips.
• With self-adhesive tape on the back, make it easy to stick on the Prototype Shield.
• Packing in a paper box.
• We have always cared about the customer experience and improve the product function details.

User questions & answers

Question:	What are the dimensions of one breadboard
Answer:	Each is about 55mm x 165mm (2-1/8 inches x 6-1/2 inches).
Question:	Why is there a typographical error in the name of a sponsored item
Answer:	No auto correct...too expensive
Question:	will these work with raspberry pi
Answer:	Absolutely. This is a universal development product. It will work with any electronics project you have.
Question:	Are the power rails continuous or split
Answer:	They are continuous.

Product description

• The quality of connections is supper consistent.
• The contacts are perfectly aligning with the holes; NO power fluctuation across the boards;
• Wonderful selection of the breadboards which fit to various electronic DIY projects and electrical experiments, including Arduino
• Quality certified; Fit for 21-32 AWG (0.2 - 0.7MM) wire
• Retain perfectly the DIP switches, 7-segment, tactile switches, certain ICs, displays, or other devices even with leads shorter than 3.5mm

Components Features:

 

6 pcs 400 tie-points breadboard

300 tie-point (30 x 10) IC-circuit area plus 4 x 25 tie-point power buses

White ABS plastic body with black printed legend. Color legend on distribution strips. With self-adhesive tape on the back

With interlocking parts

• 100 % SATISFACTION GUARANTED ★ Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason
• NO WORRIES ABOUT CIRCUIT FAILIER ★ Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards
• PIN HOLES ARE EXQUISITELY LINING UP ★ Without any intermittent connections; Holes are properly cut out;
• PERFECT SET FOR YOUR EXPERT PROTOTYPING ★ A great combination for your needs; Snap together easily in groups; Excellent for Arduino Proto Shield
• PACKAGE COMPONENT ★ 6 X 400 tie-points (3.3 x 2.16 x 0.31 Inch)

User questions & answers

Question:	Where is this manufactured
Answer:	You’re guess is as good as mine, and my guess is China. They do work fine though, and unfortunately I doubt you will find any made in the USA.
Question:	Is this a 10X30 Board
Answer:	They are as pictured. I don’t know what exactly you mean by 10x30. If you mean the holes, then yes it appears so.
Question:	How many watts can the board handle
Answer:	Not exactly, but I would say not many to be safe. Prototype the controls/timing and such for your project on the breadboard with lower wattages and then scale it up.
Question:	Amazon provides package dimensions which are usless unless you work in shipping/receiving. what are the product dimensions
Answer:	I am glad I’m not alone in thinking that. The dimensions are as follows. 54mm wide (without tabs), 56mm with tabs. 82.5mm tall without tabs, 83.7mm with tabs. 9.5mm deep.

Product description

Breadboard 3220 is designed for solderless experimental design electronic circuit manufacture. Variety of electronic components can be freely inserted or removed as needed,

eliminating the need for welding, saving assembly time of the circuit, the element can be reused, very suitable for electronic circuit assembly, commissioning and training.



1. Accepts most electronic components, including integrated circuits and transistors for digital and/or analog circuitry;

2. ABS plastic material;

3. Completely reusable;

4.Binding Posts Coded Black, Red, Blue and Green.

5. Accepts a variety of wire sizes(AWG:20-29)

6. Coloured coordinates for easy component placement

7. Pins are identified by numbered rows and columns;

8. Ideal for high frequency and low noise circuits;

9. Use to breadboard and debug circuit designs;

10. Black aluminum back plate

• ✔️3220 Test Points, 4 Binding Posts
• ✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;
• ✔️ABS housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate
• ✔️Binding Posts Coded Black, Red, Yellow and Green
• ✔️Perfect for Arduino Shield Prototyping and Testing. Powered by Makeronics Technology

User questions & answers

Question:	How many support feet (are there center supports), no photo of underside
Answer:	6 rubber feet in total are inside package(4 are must, 2 more are spare parts). We can place one rubber foot in the center of underside. Makeronics provide a better solution for rubber foot fixing. We can use these screws inside package to robustly fix rubber foot. Also provide an instruction manual for rubber feet installation.
Question:	Are the binding posts automatically connected to the busses? If not what’s a good setup? Banana from supply to post, tie in wire to bus
Answer:	No. You can use male-to-male dupont wire to connect them. Or it is easier and more convenient to use the our banana cable kit (banana plug to dupont wire(male)) to make robust connection between binding post and bus.
Question:	Where is it made
Answer:	Makeronics owns R&D team in Austin ,Texas. Our product is designed in Austin, Texas and assembled in China like Apple mode.
Question:	Are the four binding posts 3-way
Answer:	The black one of 4 binding posts in general is used for ground. The remained 3 are inconnected and independent for different voltage(such as 3.3V,5V,12V...) or same voltage.

Product description

AUSTOR 560 Pieces Preformed Breadboard Jumper Wire Kit



Specifications

Related parameters: U shape, 24 AWG, male to male

Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm

Quantity: 560 pieces jumper wires in total, 14 lengths, 40 pieces for each size



Features

Wide applications: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects.

Easy to use: all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard.



Package include

40 * 2 mm

40 *5 mm

40 *7 mm

40 * 10 mm

40 * 12 mm

40 * 15 mm

40 * 17 mm

40 * 20 mm

40 * 22 mm

40 * 25 mm

40 * 50 mm

40 * 75 mm

40 * 100 mm

40 * 125 mm

1* Free tool box



Note

The breadboard wire is a little soft so that convenient for changing its shape to do connect test; if you find that it can't be inserted, please check whether the cable in the pin hole of the breadboard is in good condition or not. Our original breadboard wires did.

• Parameters: U shape, 24 AWG, male to male, wire length 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm
• Wide applications: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects
• Easy to use: all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard
• Extra bonus: come with a free plastic box, keep your jumper wire kit organized, convenient for store and fetch
• Note: the breadboard wire is a little soft so that convenient for changing its shape to do connect test; if you find that it can't be inserted, please check whether the cable in the pin hole of the breadboard is in good condition or not

User questions & answers

Question:	What is the max Amp I can use with this? In other words what is the power dissipation
Answer:	These are 26 or 28 AWG wire for bread boarding small signal components. They aren't intended for heavy current loads. They will probably carry 8 to 10 AMP before they fuse or burn open. The plug-in bread board connections will not handle that level of current very well. Power dissipation is not a parameter most engineers would be concerned about with this size of wire. These jumpers are for test wiring low current and logic level circuits. They do not make effective fuses.
Question:	Are these wires tinned for soldering on circuit breadboards
Answer:	They appear to be tinned. Just to be sure I tried a quick test with solder and they wet easily. These are normally used with the push in breadboards that are not soldered. They work very well for this. The connections are solid and reliable. The coating on the wires is important in this application. Bare copper wires are not reliable.

Product description

• The quality of connections is supper consistent.
• The contacts are perfectly aligning with the holes; NO power fluctuation across the boards;
• Wonderful selection of the breadboards which fit to various electronic DIY projects and electrical experiments, including Arduino
• Quality certified; Fit for 21-32 AWG (0.2 - 0.7MM) wire
• Retain perfectly the DIP switches, 7-segment, tactile switches, certain ICs, displays, or other devices even with leads shorter than 3.5mm

Components Features:

1 pcs 830 tie-points breadboard (Full-Size)

200 tie-point in 2 power rails, 630 in a matrix of 10 x 63. White ABS plastic, with black legend. Colored power rails with 2 split power buses. All pins are spaced by a standard 0.1 Inch. Perfect for straddling a DIP package over.

The boards also have interlocking parts, so you can hook as many together as you’d like.

It can be used for fast prototyping of electrical and electronic circuits without any soldering.

2 pcs 400 tie-points breadboard

300 tie-point (30 x 10) IC-circuit area plus 4 x 25 tie-point power buses

White ABS plastic body with black printed legend. Color legend on distribution strips. With self-adhesive tape on the back

With interlocking parts

6 pcs 170 tie-points Mini Breadboard (Mini Modular)

Great way to prototype your small projects and a new look with colored mini-breadboard. 2 columns of 17 x 5 

6 colors: red breadboard, blue breadboard, yellow breadboard, green breadboard, white breadboard, black breadboard

With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield.

They’re also great for breaking out DIP package ICs to jumper wires!

• 100 % SATISFACTION GUARANTED  ★  Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason
• NO WORRIES ABOUT CIRCUIT FAILIER  ★  Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards
• PIN HOLES ARE EXQUISITELY LINING UP ★ Without any intermittent connections; Holes are properly cut out;
• PERFECT SET FOR YOUR EXPERT PROTOTYPING ★  A great combination for your needs; Snap together easily in groups; Excellent for Arduino Proto Shield
• PACKAGE COMPONENT  ★  1 X 830 tie-points (6.5 x 2.2 x 0.4" ); 2 X 400 tie-points (3.3 x 2.16 x 0.31 Inch); 6 pcs 170 tie-points Mini (1.77 x 1.35 x 0.37 Inch);

Product description

Arduino is an open-source hardware and software platform where users can create tremendous electronic projects using programming via Arduino IDE, which users need to download directly from Arduino.cc. Since Arduino is open source, ELEGOO got the chance to make the same UNO R3 board which is fully compatible with Arduino.



The Upgraded Electronic Fun Kit is used as an extension kit for ELEGOO UNO R3 board or MEGA 2560 board and if you dont have one you can buy one from our store.



Component listing:

1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V

1pcs 830 tie-points Breadboard

1pcs 65 Jumper Wire

140pcs Solderless Jumper Wire

20pcs Female-to-male Dupont Wire

2pcs Pin header (40pin)

1pcs Precision Potentiometer

2pcs Photoresistor

1pcs Thermistor

5pcs Diode Rectifier (1N4007)

5pcs NPN Transistor (PN2222)

1pcs IC 4N35

1pcs IC 74HC595

1pcs Active Buzzer

1pcs Passive Buzzer

10pcs Button (small)

10pcs 22pf Ceramic Capacitor

10pcs 104 Ceramic Capacitor

5pcs Electrolytic Capacitor (10UF 50V)

5pcs Electrolytic Capacitor (100UF 50V)

10pcs White LED

10pcs Yellow LED

10pcs Blue LED

10pcs Green LED

10pcs Red LED

1pcs RGB LED

10pcs Resistor (10R)

10pcs Resistor (100R)

30pcs Resistor (220R)

10pcs Resistor (330R)

10pcs Resistor (1K)

10pcs Resistor (2K)

10pcs Resistor (5K1)

10pcs Resistor (10K)

10pcs Resistor (100K)

10pcs Resistor (1M)

• The highest cost performance knit with more than 300Pcs components
• Datasheet is available to download from our official website or you can contact our customer service
• Better improvement from our customers' suggestion
• Great quality and packing in a paper box
• Not including the controller board

User questions & answers

Question:	What is the power supply module for
Answer:	It is used to plug into a breadboard to supply either 3 volts or 5 volts to the power rails. The rails are blue and red. blue being negative red being positive
Question:	Is this the same thing as the Raseberry pi
Answer:	This thing actually has nothing to do with the Raspberry Pi. It's an electronics kit, but there is no computer within the kit. Just various electronic components.
Question:	What are the dimensions of the breadboard
Answer:	84 x 55 x 8 mm
Question:	Where can I find datasheets for all the components
Answer:	i found it on their website, ive been looking all day, heres the link, click on the product and the zip file has all of the datasheetshttp://www.elegoo.com/download/

Product features

74HC595

At sometime or another you may run out of pins on your UNO board and need to extend it with shift registers. This example is based on the 74HC595. The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state." In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multiple registers together to extend your output even more.

4N35

The 4N35 is an optocoupler for general purpose application. It consists of gallium arsenide infrared LED and a silicon NPN phototransistor. When the input signal is applied to the LED in the input terminal, the LED lights up. After receiving the light signal, the light receiver then converts it into electrical signal and outputs the signal directly or after amplifying it into a standard digital level. Thus, the transition and transmission of electricity-light-electricity is completed. Since light is the media of the transmission, meaning the input terminal and the output one are isolated electrically, this process is also be known as electrical isolation.

PN2222 NPN Transistor

The small DC motor, is likely to use more power than an UNO digital output can handle directly. If we tried to connect the motor straight to an UNO pin, there is a good chance that it could damage the UNO. A small transistor like the PN2222 can be used as a switch that uses just a little current from the UNO digital output to control the much bigger current of the motor. The transistor has three leads. Most of the electricity flows from the Collector to the Emitter, but this will only happen if a small amount is flowing into the Base connection. This small current is supplied by the UNO digital output.

Electrolytic Capacitor

An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime.

Ceramic Capacitor

A ceramic capacitor uses a ceramic material as the dielectric. Ceramics were one of the first materials to be used in the production of capacitors, as it was a known insulator. Ceramic capacitors are usually made with very small capacitance values. Ceramic capacitors are also very small in size and have a low maximum rated voltage. They are not polarized, which means that they may be safely connected to an AC source. Ceramic capacitors have a great frequency response due to low parasitic effects such as resistance or inductance.

1N4007 Diode

A diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using a grey bar as shown in the picture above. For 1N4007 Diode, the maximum current carrying capacity is 1A it withstand peaks up to 30A. Hence we can use this in circuits that are designed for less than 1A. The reverse current is 5uA which is negligible. The power dissipation of this diode is 3W. Applications of Diode: ● Can be used to prevent reverse polarity problem ● Half Wave and Full Wave rectifiers ● Used as a protection device ● Current flow regulators

Product description

Use to breadboard and debug circuit designs.

User questions & answers

Question:	does this come with a power supply
Answer:	Power supply sold separate. Recommended: AC/DC breadboard power supply, Jameco P/N 77682.
Question:	can i use any power supply for this board ? or what is recommended
Answer:	Typically, breadboards use rather low power components so it's not necessary to use a supply greater than 5 amps in most cases. With that being the case, most any wall wart style power supply would work well in most cases. If you know that you will be working with more than one voltage, something like our part number 77682 is recommended.

Product description

This high quality bredboard has 3220 test points, 504 separate 5 point terminals, and 14 horizontal bus lines. Additioally utilize the four color coded binding posts (black, red, yellow, green). From Elenco.

• 3220 Test Points
• 504 Separate 5 Point Terminals
• 14 Horizontal Bus Lines
• Binding Posts Coded Black, Red, Yellow and Green
• From Elenco Electronics

User questions & answers

Question:	power supply
Answer:	It's only a breadboard with the capability of attaching a separate power supply using banana plugs. You can probably buy a cheap regulated power supply for around $50.
Question:	Will 1/2 watt, 2 watt, and 5 watt resistors fit in this? also leads from large capacitors that would be used in guitar amps
Answer:	This board accepts 20 AWG wire. I have not tried any wire that's larger in diameter yet. It possibly could accept wires a wee bit larger in diameter. I know it accepts large paper clips just fine. I hope this helps out.
Question:	Does this come with breadboard jumpers
Answer:	No, you have to buy them separately, but they shouldn't be too outrageously expensive.
Question:	Do the power strips go full length or half length connectivity
Answer:	Connectivity is full length

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

Packing: 12 x 170 tie-points 6 colors Mini small solderless breadboards,each colors two pieces(every pieces can connect to each other.)





Features

-Color:Red + blue + black + white + green + yellow

-size:1.85*1.38*0.33inches (4.7*3.5*8.5cm)

-A terminal strip: Tie-point 170,Accepts a variety of wire sizes (29-20 AWG).

-Material:ABS Features With 170 tie points With self-adhesive tape on the back, make it easy to stick on the Prototype Shield or a flat surface.



-Fuctions:

1)Perfect for DIY projects,matching jumper.

2)Perfect for proto-typing circuit, electronic and electrical experiments without soldering.

• Perfect for proto-typing circuit, electronic and electrical experiments without soldering.
• Packing 12 x 170 tie-points 6 colors Mini small solderless breadboards,each colors two pieces. (every pieces can connect to each other)
• Color:Red + blue + black + white + green + yellow
• Size:1.85*1.38*0.33inches (4.7*3.5*8.5cm)
• Material:ABS Features With 170 tie points With self-adhesive tape on the back, make it easy to stick on the Prototype Shield or a flat surface.

User questions & answers

Question:	What is the pitch size
Answer:	The pitch is 0.100 inches. All IC's, Diodes, switches, etc. fit on it very well.
Question:	What do it do ? The function and purpose
Answer:	They are used for prototyping electrical circuits. They are smaller than most standard breadboards, so they can fit into smaller places.