13 best fixed resistors
Fixed resistors are fundamental electronic components widely used in electrical circuits to control the flow of electric current. They are passive components, meaning they do not produce energy but instead resist the flow of electric current passing through them. Fixed resistors have a constant resistance value that cannot be adjusted or varied, unlike variable resistors which can change their resistance value manually or automatically. Here are some key points about fixed resistors:
1. Function:
Fixed resistors limit the current flow and voltage levels in a circuit. They are used for various purposes such as voltage division, current limiting, biasing transistors, and setting the operating point of electronic devices.
2. Construction:
Fixed resistors are typically made of materials with high resistivity, such as carbon composition, metal film, metal oxide, or wire wound around an insulating core. The choice of material depends on factors like precision, stability, and power handling capacity required for the specific application.
3.Types of Fixed Resistors:
a. Carbon Composition Resistors:
- Made of a mixture of carbon particles and insulating ceramic.
- Suitable for general-purpose applications and low-frequency circuits.
b. Metal Film Resistors:
- Made by depositing a thin metal film onto a ceramic substrate.
- Offer higher precision and stability compared to carbon composition resistors.
- Commonly used in audio and precision electronic circuits.
c. Metal Oxide Resistors:
- Made using a metal oxide film deposited on a ceramic rod.
- Provide high stability, tolerance, and power handling capabilities.
- Suitable for high-power applications.
d. Wirewound Resistors:
- Constructed by winding a resistive wire around a ceramic or fiberglass core.
- Can handle high power levels and have excellent stability.
- Commonly used in power electronics and industrial applications.
4. Identification:
Fixed resistors are color-coded or labeled with numerical codes to indicate their resistance value, tolerance, and sometimes power rating. The color code system uses different colored bands to represent numbers, multipliers, and tolerance values.
5. Applications:
Fixed resistors find applications in various fields, including electronics, telecommunications, automotive, aerospace, and industrial automation. They are essential components in electronic circuits, ensuring proper operation and preventing damage to sensitive components.
6. Considerations:
When selecting a fixed resistor for a specific application, factors like resistance value, tolerance, power rating, and temperature coefficient must be considered to ensure the resistor can handle the conditions it will be subjected to in the circuit.
In summary, fixed resistors are crucial passive components used in a wide range of electronic applications to control current flow and voltage levels. Their stable and unchanging resistance values make them valuable components in designing reliable and efficient electronic circuits.
Below you can find our editor's choice of the best fixed resistors on the market
BOJACK 50 Values 1350 Pcs Resistor Kit 0 Ohm-5.6M Ohm with 1% 1/4W Metal Film Resistors Assortment
BOJACK
- BOJACK resistor assortment kit contains 1350pcs resistors with variety values. Enough quantity for your DIY project and experiments
- These resistor kits including 50 different values: 0Ω，1Ω, 2.2Ω, 4.7Ω, 7.5Ω, 10Ω, 15Ω, 22Ω, 33Ω, 39Ω, 47Ω, 56Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 390Ω, 470Ω, 510Ω, 680Ω, 1KΩ, 1.5KΩ,2KΩ, 2.2KΩ, 3KΩ, 4.7KΩ,5.1KΩ, 5.6KΩ, 7.5KΩ, 8.2KΩ, 10KΩ, 15KΩ, 22KΩ, 33KΩ, 47KΩ, 56KΩ, 68KΩ, 75KΩ, 100KΩ, 150KΩ, 220KΩ, 330KΩ, 470KΩ, 680KΩ, 1MΩ, 2MΩ, 4.7MΩ, 5.6MΩ, to fulfill your variety requirement
- Upgrade version resistors with ±1% tolerance range, 1/4w metal film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly
- More humanized design with 50 pcs frequently used resistors (100, 220, 1k, 10k Ohm) and 25 pcs seldom used resistors. Color Code Guide helps you read the resistance
- With complete certification including RoHS certificate
User questions & answers
| Question: | are these awg 22 leads or thinner |
| Answer: | The diameter are 0.35mm. |
| Question: | What is the diameter of the leads? Are these suitable for breadboarding |
| Answer: | The diameter is 0.35mm. On fresh contacts it is working on my breadboard - on used ones I would double the wire. |
BOJACK 1000 Pcs 25 Values Resistor Kit 1 Ohm-1M Ohm with 1% 1/2W Metal Film Resistors Assortment
Product description
BOJACK 1000pcs 25 values 1% resistor assortment from 1 Ohm to 1M Ohm 1/2W Metal film resistors assortment kit
have a better connection and stable performance which help you finish the electrical
experiments project faster and more smoothly.
Product Feature:
These resistor kits including 25 different values: 1Ω，2.2Ω, 3.3Ω,4.7Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω,
150Ω, 220Ω, 330Ω, 470Ω, 1KΩ, 2KΩ, 2.2KΩ,4.7KΩ,5.6KΩ, 7.5KΩ,10KΩ,
22KΩ, 47KΩ, 100KΩ,1MΩ to fulfill your variety requirement
Relative parameters: ±1% tolerance, 1/2w, Metal film lead free and RoHS compliant
Application: Arduino projects and other electronic and electrical experiments
Note:
CHOKING HAZARD -- Small parts, please keep away from children under 3 years.
- BOJACK resistor assortment kit contains 1000pcs resistors with variety values. Enough quantity for your DIY project and experiments
- These resistor kits including 25 different values: 1Ω，2.2Ω, 3.3Ω,4.7Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ,5.6KΩ, 7.5KΩ,10KΩ, 22KΩ, 47KΩ, 100KΩ,1MΩ, to fulfill your variety requirement
- Upgrade version resistors with ±1% tolerance range, 1/2w film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly
- Quantity: 1000pieces
- With complete certification including RoHS certificate
User questions & answers
| Question: | What is the voltage rating of Bojack 1/2 watt resistors |
| Answer: | Depends on the resistance value, limited by the power rating of 0.5W. Power according to Ohm's law: P=U^2/R = 0.5W max So, the maximum voltage is SQRT(0.5*R) For the lowest resistor value (1Ω), the maximum voltage is SQRT(0.5*1) = 0.707V. For the highest value (1MΩ) the theoretical maximum voltage is SQRT(0.5*1000000) = 707V, which is quite dangerous! For these voltages you would need special resistors that are designed for high voltage applications. I would not go over 200V with a metal film resistor. |
| Question: | Can I use this with a 12 V adapter |
| Answer: | It should be possible, mainly referring to the current of the components. Thank you |
Chanzon 175pcs 0.1R-1MR Ω ohm 35 Values Metal Film Fixed Resistor Kit 1W ±1% Tolerance 0.01 MF Through Hole Resistors Assortment Current Limiting Rohs Certificated
CHANZON
Product description
Advantages of Chanzon Metal Film Resistors
No matter you are beginners who just start learning electronics or Professinal engineers who are looking for a resistor kit of high quality, Chanzon resistor kit is definitely your best option.
Low cost
Generates less noise than carbon composition resistor
Wide operating range
Long-term stability
Low tolerance
Low temperature co-efficient of resistance
Very small in size
Superior and Stable Perfprmance
You do not want to use resistors of inferior quality that could ruin your whole project. Chanzon resistor kit of high quality and outstanding performance willbe your top priority when it comes to electronic experiments.
Well Organized with Zip-Locked Bag
Ever frustrated with messy resistors scattered around? Chanzon resistor kit comes with a sturdy plastic container and individual zip lock bags lablelled with resistance value, which saves a lot of time sorting out resistors.
Resistor Color Code Chart
A Color Code Chart is enclosed in the package sheet and it will help you to learn the different value of each color
- ☛Why Choose Us☚: 1. 0.5mm Fat Leg, Super Sturdy & Accurate 2. Ink Jet Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent
- Fix Resistance Values: 0.1R 0.22R 1R 2R 2.2R 4.7R 10R 22R 47R 100R 150R 220R 330R 360R 390R 470R 560R 680R 1K 2K 2K2 4K7 6K8 10K 15K 22K 47K 68K 100K 150K 220K 470K 620K 680K 1MR R ohm kohm megaohm
- Power: 1 w watt, TOL: ±1%, Diameter: 3mm, Film Length : 9mm, Axial Leads End: 25mm, 175 pcs Pieces Single Fixed Resistor with Line
- Feature: High Stability, Low Noise, Low Temp Coefficient, Precision Characteris Tics ohms, Long Working Life Resister
- Application: For/on Precise Electronic Circuits, Arduino, Electronic And Electrical Communication Equipments, Musical Instrument or Applications,Electronics
Chanzon 150pcs 1R-1MR Ω ohm 30 Values Metal Film Fixed Resistor Kit 2w ±1% Tolerance 0.01 MF Through Hole Resistors Assortment Current Limiting Rohs Certificated
CHANZON
Product description
Advantages of Chanzon Metal Film Resistors
No matter you are beginners who just start learning electronics or Professinal engineers who are looking for a resistor kit of high quality, Chanzon resistor kit is definitely your best option.
Low cost
Generates less noise than carbon composition resistor
Wide operating range
Long-term stability
Low tolerance
Low temperature co-efficient of resistance
Very small in size
Superior and Stable Perfprmance
You do not want to use resistors of inferior quality that could ruin your whole project. Chanzon resistor kit of high quality and outstanding performance willbe your top priority when it comes to electronic experiments.
Well Organized with Zip-Locked Bag
Ever frustrated with messy resistors scattered around? Chanzon resistor kit comes with a sturdy plastic container and individual zip lock bags lablelled with resistance value, which saves a lot of time sorting out resistors.
Resistor Color Code Chart
A Color Code Chart is enclosed in the package sheet and it will help you to learn the different value of each color
- ☛Why Choose Us☚: 1. 0.5mm Fat Leg, Super Sturdy & Accurate 2. Ink Jet Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent
- Fix Resistance Values: 1R 1.5R 2.2R 2.7R 3.3R 3.9R 4.7R 5.1R 6.8R 10R 15R 20R 22R 33R 47R 51R 56R 100R 150R 220R 330R 390R 470R 1K 2K2 4K7 47K 10K 100K 1MR
- Power: 2 w, TOL: ±1%, Diameter: 4mm, Film Length : 11mm, Axial Leads End: 25mm, 150 pcs Pieces Single Fixed Resistor with Line
- Feature: High Stability, Low Noise, Low Temp Coefficient, Precision Characteris Tics ohms, Long Working Life Resister
- Application: For/on Precise Electronic Circuits, Arduino, Electronic And Electrical Communication Equipments, Musical Instrument or Applications,Electronics
EDGELEC 100pcs 10K ohm Resistor 1/4w (0.25 Watt) ±1% Tolerance Metal Film Fixed Resistor, Multiple Values of Resistance Optional
EDGELEC
Product description
100pcs - 10K ohm - 0.25 Watt (1/4W) Metal Film Resistor
Resistor size parameters:
* The total length: 58mm
* The length of the shell: 6mm
* One side lead length: 26mm
* Maximum diameter of shell: 2.5mm
* Minimum diameter of shell: 2.0mm
* Diameter of lead: 0.38mm
- Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.
- ±1% Tolerance range: Maintaining Sccuracy Over Time
- Product: 10K ohm 1/4w (0.25watt) -100 pcs
- Aaxial-Lead Resistors: Wide Variety Of Applications: Arduino, Electronic And Electrical Experiments
- Anti-static Bag Sealed Packaging: Easy to preserve and use.
User questions & answers
| Question: | Are these the best ohm values to use on led lights that require between 5-12 volts? I intend on using a 9v battery to run these..,individually |
| Answer: | Yes, I think you can get by with the 470 ohm resistors. They get a little warm to the touch when using a 9 volt battery. They are drawing about 15.5 ma using the 470 ohm resistors. I usually set mine to near 20 ma so, I usually use the 1/2 watt resistors for a safety factor. The power drawn is about 113 mw so this should work for you, that is at 9 volts. |
| Question: | What is the length of these resistors (body) minus leads |
| Answer: | 1/4 Watt Resistor Size: Total length: 60mm Body length: 6mm One side lead length: 27mm Maximum body diameter: 2.6mm Minimum body diameter: 2.0mm Lead diameter: 0.35mm |
| Question: | Do these lower the voltage by 3 volts or what should i be looking for? i need to drop 6 volts to power a tamiya motor |
| Answer: | You need to state what the rated current is for the motor, and the nominal voltage of your power supply. I am not familiar with the motor you are using, but assuming it is a DC motor and for illustration we shall pretend it draws 30 milliamps at 3 volts, and that your power supply is rated at 6 volts DC, we can now calculate the resistance needed to dop the voltage for the motor. To drop 3 volts across a resistor at 30 milliamps you would use the basic fomula V = IR where V is the voltage, I is the current, and R is the resistance. To get R we divide V by I. 3 Volts divided by 30 milliamps give a resistance of 100 Ohms. It is for you to work out your required resistance value from here. Also, you need to consider your wattage for the resistor - wattage is the power being dissipated by the resistor. P = VI where P = power (watts), V = voltage and I = current. for my example, 3 Volts * 30 milliamps = 0,09 watts - a 0.25 watt resistor will be fine. If you were dropping 3 volts across a esistor and your current was 0.3 milliamps, your 0.25 watt resistor would glow cherry red and then likely stat to burn - you need to consider the power rating of the resistor as well as the resistance value. |
| Question: | How many resistors come with each order |
| Answer: | Think the pack of a hundred, prolly had close to a hundred in it. |
uxcell SMD Chip Resistor, 330 Ohm 1/4W 1206 Fixed Resistors, 1% Tolerance 200pcs
uxcell
Product description
Small size and light weight, highly reliable multilayer electrode construction, compatible with all soldering process.
The SMD chip resistor is widely used in telecommunications equipments, radio and tape records, TV tuners, industry, etc.
Note: Generally designed and used according to 70% of the rated and working power.
Specifications:
Material: Glass Glaze
Feature: Thick Film Chip Resistors
Device Package / Case: 1206
Per Piece Size: 0.12-inch/3.2mm x 0.06-inch/1.6mm x 0.02-inch/0.55mm(L*W*T)
Tolerance: +/-1%
Resistance Value: 330 Ohm
Mark: 3300
Power (Wattage): 1/4W
Rated Voltage: 9V
Maximum Working Voltage: 200V
Number of Terminals: 2
Package Content :
200 (+/-2%) x Resistors
- MATERIAL - glass glaze.
- PARAMETER - rated resistance:330 Ohm; tolerance: 1%.rated power: 1/4W; device package/case: 1206; size: 0.12-inch/3.2mm x 0.06-inch/1.6mm x 0.02-inch/0.55mm(L*W*T).
- FEATURE - thick film chip resistors,two end soldering,surface mount.
- APPLICATION - widely used in telecommunications equipments, radio and tape records, TV tuners, industry.
- PACKAGE CONTENT - 200 (+/-2%) x resistors.
200pcs 330 ohm Resistors 1/4w ±1% Metal Film Single Fixed Resistor, Multiple Values of Resistance Optional
VvW
Product description
Metal Film Single Fixed Resistor
330 Ω Ohm 1/4w
Pack of 200 Pcs
Multiple Values of Resistance Optional
- Metal Film Single Fixed Resistor
- 330 Ω Ohm 1/4w
- Pack of 200 Pcs
User questions & answers
| Question: | will this fit am |
| Answer: | This will fit any processor or more importantly the motherboard. It comes with a couple plastick guides they are slotted to slide wherever they need to be put. But they only go corner to corner. I would suggest replacing the plastic with aluminum rod from a hobby shop. |
| Question: | does it come with 2 blocks or just |
| Answer: | one block (+ two cute charms) When i ordered it i could have sworn it came with two. But looking now the only indication of that was the plural use of blocks in the "This Item: SZZY Aluminum water cooling blocks for cpu Heatsink Cooler plater 41x 41 x 12mm". |
| Question: | How many blocks and 12v 60w peltier chips would one need to cool 8.33 US gallons of nutrient at a chilled temp of 65-68 F |
| Answer: | Peltier plates work off of temperature differential. Around room temp, you wouldn't need much energy but it also depends on the size of your plate, the amps, temperature control, insulation, the speed of moving water through your pump, on and on and on... That's engineering. |
| Question: | can this be used on a 780 GPU |
| Answer: | There is no mounting kit and hard to find one. Bard fitting OD is not 3/8 so does not fit (loose) most 1/2 OD tubes. I use 40mm fans to cold down chip sets. |
SMD 0805 Resistor Kit,Ltvystore SMD Chip Fixed Resistor Assortment Set 0805 1% 1/8W 0.125W O Ohm - 10M Ohm Resistors Assorted, 50 Value 1500PCS Compatible Arduino DIY Resistor Sample Kit
Ltvystore
Product description
Are You Looking For 0805 SMD Resistor Kit that Mark Ohm Value ?
Are You Looking For Cheap and Cheerful 0805 Resistor Assortment?
Are You Looking For Well Package Resistor Kit 1/8 Watt ?
Are You Receive Missing Resistor?
Here Here Here!!! Upgrade Ltvystore Resistor Set Solve All Your Problem.
If You Receive Missing Resistor, E-mail Us With Your Order Number, We Will Ship The Missing Resistor To You For Free.
Resistor List:
0 ohm---30pcs
1 ohm--30pcs
4.7 ohm---30pcs
10 ohm--30pcs
22 ohm---30pcs
39 ohm--30pcs
47 ohm--30pcs
68 ohm--30pcs
75 ohm--30pcs
100 ohm--30pcs
120 ohm--30pcs
150 ohm--30pcs
220 ohm--30pcs
330 ohm-30pcs
470 ohm--30pcs
680 ohm--30pcs
1k ohm--30pcs
1.5k ohm--30pcs
1.8k ohm--30pcs
2.2k ohm--30pcs
3.3k ohm--30pcs
3.9k ohm--30pcs
4.7k ohm--30pcs
5.6k ohm--30pcs
6.8k ohm--30pcs
8.2k ohm--30pcs
10k ohm--30pcs
12k ohm--30pcs
22k ohm--30pcs
33k ohm--30pcs
39k ohm--30pcs
47k ohm--30pcs
56k ohm--30pcs
68k ohm--30pcs
100k ohm--30pcs
120k ohm--30pcs
150k ohm--30pcs
180k ohm--30pcs
220k ohm--30pcs
270k ohm--30pcs
330k ohm--30pcs
390k ohm--30pcs
470k ohm--30pcs
560k ohm--30pcs
680k ohm--30pcs
1m ohm--30pcs
2.2m ohm--30pcs
3.3m ohm--30pcs
4.7m ohm--30pcs
10m ohm--30pcs
EDGELEC 100pcs 120 ohm Resistor 1/2w (0.5Watt) ±1% Tolerance Metal Film Fixed Resistor, Multiple Values of Resistance Optional
EDGELEC
Product description
100pcs - 120 ohm - 0.5 Watt (1/2W) Metal Film Resistor
* Maximum Diameter Of Section: 3.2mm (±0.5mm)
* Length (Excluding Lead): 9mm (±0.5mm)
- Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.
- ±1% Tolerance range: Maintaining Sccuracy Over Time
- Product: 120 ohm 1/2w (0.5watt) -100 pcs
- Aaxial-Lead Resistors: Wide Variety Of Applications: Arduino, Electronic And Electrical Experiments
- Anti-static Bag Sealed Packaging: Easy to preserve and use.
User questions & answers
| Question: | What are the dimensions of the resistor body |
| Answer: | 1/2watt Resistor: Length: 0.34 inch (8.5mm) Maximum Diameter: 0.12 inch (3mm) |
| Question: | What is the diameter of the leads |
| Answer: | 0.42 mm...I measured a couple for you. They range from 0.42 to 0.41 mm. |
| Question: | My color v. Is silver black black brown 4 band..how many ohms. & watts???? What resistor do u recommend |
| Answer: | According to my handy dandy resister app on my phone , that resistor is 0 ohms with 10% tolerance. You would have to check with the manufacturer for the wattage. |
| Question: | How long is the overall length of these resistors? ( body and leads |
| Answer: | The total length is 6cm (2.36 inches). |
Fielect SMD Chip Resistor 470 Ohm 1/10W 0603 Fixed Resistors 1% Tolerance Blue 1000Pcs
Fielect
Product description
Small size and light weight, highly reliable multilayer electrode construction, compatible with all soldering process.
The SMD chip resistor is widely used in telecommunications equipments, radio and tape records, TV tuners, automotive industry, etc.
Note: Generally designed and used according to 70% of the rated and working power.
- MATERIAL - glass glaze.
- PARAMETER - rated resistance: 470Ohm; tolerance: 1%.rated power: 1/10W; supplier device package/case: 0603; Rated voltage: 7V;Maximum voltage: 75V
- FEATURE - thick film chip resistors,two end soldering,surface mount.
- APPLICATION - widely used in telecommunications equipments, radio and tape records, TV tuners, automotive industry.
- PACKAGE CONTENT - 1000 x resistors.
EDGELEC 100pcs 1K ohm Resistor 1W, 1 Watt ±1% Tolerance Metal Film Fixed Resistor, Multiple Values of Resistance Optional
EDGELEC
Product description
100pcs - 1K ohm - 1Watt Metal Film Resistor
* Maximum Diameter Of Section: 4.2mm (±0.5mm)
* Length (Excluding Lead): 11mm (±1.0mm)
- Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.
- ±1% Tolerance range: Maintaining Sccuracy Over Time
- Product: 1K ohm - 1 Watt -100 pcs
- Aaxial-Lead Resistors: Wide Variety Of Applications: Arduino, Electronic And Electrical Experiments
- Anti-static Bag Sealed Packaging: Easy to preserve and use.
uxcell SMD Chip Resistor, 0 Ohm 1/4W 1206 Fixed Resistors, 1% Tolerance 200pcs
uxcell
Product description
Small size and light weight, highly reliable multilayer electrode construction, compatible with all soldering process.
The SMD chip resistor is widely used in telecommunications equipments, radio and tape records, TV tuners, industry, etc.
Note: Generally designed and used according to 70% of the rated and working power.
Specifications:
Material: Glass Glaze
Feature: Thick Film Chip Resistors
Device Package / Case: 1206
Per Piece Size: 0.12-inch/3.2mm x 0.06-inch/1.6mm x 0.02-inch/0.55mm(L*W*T)
Tolerance: +/-1%
Resistance Value: 0 Ohm
Mark: 0
Power (Wattage): 1/4W
Rated Voltage: 0V
Maximum Working Voltage: 200V
Number of Terminals: 2
Package Content :
200 (+/-2%) x Resistors
- MATERIAL - glass glaze.
- PARAMETER - rated resistance:0 Ohm; tolerance: 1%.rated power: 1/4W; device package/case: 1206; size: 0.12-inch/3.2mm x 0.06-inch/1.6mm x 0.02-inch/0.55mm(L*W*T).
- FEATURE - thick film chip resistors,two end soldering,surface mount.
- APPLICATION - widely used in telecommunications equipments, radio and tape records, TV tuners, industry.
- PACKAGE CONTENT - 200 (+/-2%) x resistors.
uxcell SMD Chip Resistor, 100 Ohm 1/4W 1206 Fixed Resistors, 5% Tolerance 1000pcs
uxcell
Product description
Small size and light weight, highly reliable multilayer electrode construction, compatible with all soldering process.
The SMD chip resistor is widely used in telecommunications equipments, radio and tape records, TV tuners, industry, etc.
Note: Generally designed and used according to 70% of the rated and working power.
Specifications:
Material: Glass Glaze
Feature: Thick Film Chip Resistors
Device Package / Case: 1206
Per Piece Size: 0.12-inch/3.2mm x 0.06-inch/1.6mm x 0.02-inch/0.55mm(L*W*T)
Tolerance: +/-5%
Resistance Value: 100 Ohm
Mark: 101
Power (Wattage): 1/4W
Rated Voltage: 5V
Maximum Working Voltage: 200V
Number of Terminals: 2
Package Content :
1000 (+/-2%) x Resistors
- MATERIAL - glass glaze.
- PARAMETER - rated resistance:100 Ohm; tolerance: 5%.rated power: 1/4W; device package/case: 1206; size: 0.12-inch/3.2mm x 0.06-inch/1.6mm x 0.02-inch/0.55mm(L*W*T).
- FEATURE - thick film chip resistors,two end soldering,surface mount.
- APPLICATION - widely used in telecommunications equipments, radio and tape records, TV tuners, industry.
- PACKAGE CONTENT - 1000 (+/-2%) x resistors.
Latest Reviews
View all
Epson Color Laser Printers
- Updated: 21.03.2023
- Read reviews
Lego Books On Wars
- Updated: 17.02.2023
- Read reviews
Dean Koontz Audio Books
- Updated: 03.05.2023
- Read reviews
Aveeno Natural Shampoo And Conditioners
- Updated: 10.06.2023
- Read reviews
Zero G Beyblades
- Updated: 12.02.2023
- Read reviews