9 best switch with homes

Product description

Description

Multifunction： Switch Panel Kit:included 2.1A/5V & 1A/5V dual usb charger,digital voltmeter, cigarette lighter socket and ON-OFF Button Switch

Material: Made of engineering ABS plastic and the entire plate is nylon built Output circuit protection, overload protection & reverse polarity protection Submerged in water operation is not recommended

Usage: forCar, Truck,Boat, Marine, ATV, RV,Trailer Vehicles Yacht SUV, etc. 

Suitable for both 12V and 24V systems Panel is pre-wired Easy to install: only put this in to the switch hole, fix it with screws and then you can begin to use it.

Specifications:

USB Pocket: 2 USB (5V 1A / 5V 2.1A)

Operating Temperature:-25℃-80℃

Protection class: IP65

Description on Dual USB Power Charger:

Working voltage:12-24V

Output current:3.1A

Output voltage:5V

LED Light:Blue,Green,Red.

Rubber cover should be on to protect the device from moisture

Waterproof casing will protect the charger from rain or coffee spill

Dual USB port can satisfy you all kinds of charging needs. Charge for iOS Android mobile phone, GPS Navigator, camera, MP3 Player, etc.

Description on Voltmeter:

Voltage indicator real-time monitor your vehicle's voltage from 6V to 28V

The led digital voltmeter clearly shows your car volts and helps you to better understand battery condition.

Description on Cigarette Lighter Socket:

Working voltage:12-24V

Output voltage:12-24V

12V / 24V cigarette lighter socket with dustproof rubber seal cover.

Rubber cover should be on to protect the device from moisture

• ※1x Cigarette Lighter Socket + 1x LED Voltmeter + 1x Dual USB Charger,Small size and excellent performance.Easy to install, Waterproof LED illuminated USB charging socket & Voltmeter Fits for any flat interior and exterior application.
• ※The switch easy to control and with the light to remind poeple when the switch on.Voltage display can timely display the battery voltage whether in the normal use range or not and with digital display to let you know the battery's voltage accurate data.
• ※Apply to all 3.1A USB charging mobile phones or other electronic products. Great for charging your Phones, Tablet, Android Devices, PDA, GPS ect.Run multiple accessories at one time, very convenient and easy to use.
• ※NOTE: This Dual USB Socket and Cigarette Lighter Power Socket is designed for DC 12V use and should NOT be plugged into an outlet in your home. Also, this Cigarette Lighter Power Socket Outlet is NOT to be used for actual hot lighters.
• ※Customer Service: Any questions please feel free to contact us, we would deal with it in a 24 hour time. And we will try our best to satisfy with you.

Product description

Description:



Product  suit for 30mm / 1.18-inch Push Button Switch reserved hole

Note: Here cover is only, the push button switch is not included.

• Overall Size: 20 x 37.5mm / 0.79" x 1.48" (H*D); Country of Manufacture: CHINA
• Material: Plastic; Net Weight: 182g
• Package Content: 24pcs x Hole Panel Plug
• Fit for Round Switch Head Diameter: 30mm / 1.18-inch
• Fit For Panel Hole: 30mm

Product description

Rocker Switch Panel Cover for Empty Slot

• Fits industry standard rocker switch panel holes
• High Quality Material,Durable,Easy to Change
• Durable, Resistant to high or low temperature environment
• Including 6 Pcs Blanking plate Covers
• Fast Delivery, Fulfillment by Amazon

Product description

This new Patented Custom Production Switch Panel allows you to install various standard rocker switches into your 2015, 2016, 2017, 2018 and 2019 F-150 if you have the center console with shifter. The panel installs into the long slot between the cup holders and shifter. It gives an OEM look. THERE ARE 2 VERSIONS! This is the 3 Slot Design for Universal Rocker Switches. Be sure to check out the other version in my store with customizable top that allows you to cut or drill holes for any LED, Switch, Knob, etc. This allows complete customization of your interior.

• OEM Look
• Easy Installation

User questions & answers

Question:	Is there a certain brand name switches that are recommended for this to fit perfectly
Answer:	Definitely not for a hand drill. You need to invest in a proper mortising machine. I have the "Shop Fox W1671 3/4 HP Heavy-duty Mortising Machine" and am very satisfied.
Question:	How are the power wires ran. Do you have drill holes in the center console
Answer:	My husband says yes they will fit a skill drill press.
Question:	Are there any videos of removing the trim on the console and installing the complete set up for an F150? I haven't found any so far
Answer:	Mine were several different sizes both the chisels and the drill bits. Only one of the set would fit my Delta
Question:	Are there iany blank off plates to cover the empty switch slots not being used
Answer:	With the right accessories. These are for mortise machines. Some drill presses can be adequately equipped but I wouldn’t use these bits without the appropriate other items.

Product description

Button is extremely durable and has a long service life. The buttons are simple to operate and easy to use.

If there is a quality problem, Please contact us via email. We will try our best to solve it for you, Or send you a new one, Until your problem is solved. Please trust our service.

Module Name: KAO-5H/KAO-10KH

Button: A start button (Green) and an end button (Red)

Button Locked Type: Self-Locked

Rated Current: ITH 10A 120/220/230/380V AC

Pay Attention: The Button Surface is waterpoof and dustproof, Box base is not waterproof, advise to use indoor or inside space where water can not enter.

• The switch has passed our quality inspection, You may buy with confidence. If there is a quality problem, Please contact us via email. We will try our best to solve it for you, Or send you a new one, Until your problem is solved. Please trust our service.
• Advise indoor use; Product Name :push button switch; Contact Type : Latching I/O; Rated Voltage : AC 220/380V; Ith : 10A;
• Overall Size (Approx.) : 90 x 55 x 46mm / 3.6" x 2.1" x 1.8" (L x W x T);Mount Holes Dia : 4.5mm / 0.2"
• Widely Application : Great for Box Mod, Horn Button Switch, PC Power Switch, Kill Switch or any circuit controls ,electronic DIY equipment
• Package Content : 1pcs x Push Button Switch with Base

Product description

【Description】

20 Pcs Micro Momentary Tactile Push Button Switch100% Brand New and high quality.

High precision mechanism design offers perfect operation and long service life used in the 

fields of electronic products, household appliances and more.

【Package included】

6x6x5mm(2P)----------20pcs

【Features】

1. Operating temperature range: -25~85℃

2. Rated load: DC 12V 50mA

3. The contact resistance: 50 m Ω MAX

4. The insulation resistance: 100 m Ω MIN

5. Voltage resistance: AC 250V(50Hz) /min

6. Mechanical life: 100,000 times

【Package Quantity】

Total 20 Pcs.

• Size: 6*6*5; Material: Copper, Plastic, Stainless
• Installation: through hole installation
• The touch switch is suitable for most electronic experiments and is the perfect size for the breadboard.
• Features:1. Operating temperature range: -25~85℃ 2. Rated load: DC 12V 50mA 3. The contact resistance: 50 m Ω MAX 4. The insulation resistance: 100 m Ω MIN 5. Voltage resistance: AC 250V(50Hz) /min 6. Mechanical life: 100,000 times
• Applications: for car remote control, LCD panel key switch, Electronic toys, massage chair, running machine, camera, voice recorder, etc., monitor, intercom, MP3, MP4, DVD, audio, digital cameras, digital cameras, such as thermometer, blood pressure, hospital call system, vehicle, ava, family anti-theft door remote control, mobile, telephone, car phones, building equipment, PDA, TV, microwave oven, electric cooker, electric wind, fat electronic body scale, electronic scale,

User questions & answers

Question:	do these make a click sound
Answer:	No, I just bought rocker switches that looked like the ones in the picture, if they are touch tight I would have filed down the switch. I had no problems.
Question:	Will it fit a regular PCB (not breadboard
Answer:	Yes some slight trimming is required (at least I did ) underneath the rubber molding so everything sits flush
Question:	Will these connect fine with female head of arduino wires
Answer:	I didnt find any either but it's not hard all points are pressure clips I bought a trim removal tool like a flat plastic screwdriver works well
Question:	normally open contacts
Answer:	Good question. I don’t recall seeing any but I’m sure it’s offered. Have you tried to search rocker switch covers or blanks? Good luck.

Product description

Feature:

1. Host card slot, professional precise designed for game machine.

2. Precise cutting and interface ensures perfect applicability, suitable for installation location and easy to install.

3. Professional chip sets, provide superior performance in the system.

4. Made of high quality materials, avoids corrosion and wear effectively, durable using.

5. Suitable for Nintendo Switch game cartridge card slot reader tray headphone hole port.

Specification:

Condition: 100% Brand New

Item Type: Game Host Card Slot

Material: Metal + ABS

Color: As Pictures Shown

Fitment: For Nintendo Switch Host Repair Accessory/NS Host Card Slot with Board

Quantity: 1PCS

Weight: Approx. 5g

Size: Approx. 4.2x3.8x0.5cm/1.65x1.50x0.20inch

Package List:

1 x Game Host Card Slot

• Host card slot, professional precise designed for game machine.
• Precise cutting and interface ensures perfect applicability, suitable for installation location and easy to install.
• Professional chip sets, provide superior performance in the system.
• Made of high quality materials, avoids corrosion and wear effectively, durable using.
• Suitable for Nintendo Switch game cartridge card slot reader tray headphone hole port.

User questions & answers

Question:	Is this jyst the card slot or the whole board as pictured
Answer:	Yes they are normally open.

Product description

What You Get:

1 * Touch Switch

1 * Instruction



What's the Touch Switch:

Touch switch, just touch it!



The touch switch is rated for 7A MAX /DC 6-24V.



What's the Touch Switch Used for:

Most often the Stepless Dimming switch is used for lights (Such as critical lights, chassis lamp, dome light)



About Stepless Dimming type:

1.The light is off when connecting to electricity. Click it (time < 550ms) once to initiate it with the light on. Click it again to let it be off. Continue to cycle.

2.The initial brightness is 100% of the maximum brightness.

3.Touch and hold it (time > 550ms) to initiate stepless dimming control. The brightness increases when touching and holding, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at maximum level. The brightness decreases when touching and holding again, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at minimum level. Continue to cycle.

4.Click and Holding Touch can be used anytime. There is no interference between these two functions.



What's Note:

If you meet the static electricity problem, you can let the switch housing be grounded.

*The touch switch doesn't work with wet or damp fingers.

*The touch switch cannot be used in AC circuit. Don't exceed the rating volts!



Specifications:

Head diameter: 7/8" ( 22mm )

Mounting hole size: 3/4" ( 19mm )

Depth inc contacts: 1.1" ( 28mm )

Switch Type: Stepless Dimming

Input Voltage: DC 6V-24V

Output Current: 7A MAX

LED voltage: DC 6V-24V

LED color: Blue (always ON)

Enclosure material: Stainless Steel

Protection level: IK10

Operating Temperature: -20℃ ～ +55℃

• Touch switch, just touch it!
• Stepless Dimming Type: You can Click or Holding Touch the switch to control your lights
• Blue LED ring always light ON, make you quickly find the switch at night or in the dark
• The wires replace the terminal pins, make installing very easy
• Dimming Switch, normally be used to control the lights. Don't exceed the rating amps and volts, you can run it on your other projects.

User questions & answers

Question:	Is it waterproof? Wanting to mount in truck bed with bed lights
Answer:	I’d say it’s more like splash resistant verses being waterproof. The back where the wires come out doesn’t seem watertight. Whenever I install these in a vehicle or inside of a sailboat I put them in a small weathertight box.
Question:	Will this switch work in a 3-way environment? Can I have another on/off switch on the circuit
Answer:	No, this will not work as a 3-way switch. Yes, you can have multiple switches on a single circuit if wired correctly.
Question:	Does this product use pwm/ is it compatible with any 12volt led dimmable tape light? also will it have a significant electrical draw in standby mode
Answer:	Yes, UT19T1 touch switch use pwm. It is compatible with any 12volt DC led light. It is about 5~6 mA in standby mode.
Question:	Does the dimmer saves the light level when the electricity goes off and then on
Answer:	No. The dimmer will change the light level when you touch it.

• ★Brand New Stainless Steel Pushbutton Switch; Push button light switch mounting hole: 22mm; Rated current and voltage: 5A / 12V
• ★This on off switches come with 5 pins wire terminal with socket plug, don’t need soldering,
• ★Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC
• ★Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
• ★2 Pack 22mm push button Blue LED light switch can be used in wet or dusty environment.

User questions & answers

Question:	Can this be used with 12v systems
Answer:	Yes. They are made to fit a breadboard. Those wires will fit the breadboard too.

Product features

Latching Switch :

• Latching switch, push it down, it stays down and latched in the closed position
• press the button again and it releases and unlatched

colour:

• A variety of colors can be selected, rich and varied

Size:

• Head Shape: flat head
• Head Diameter: 24.8mm
• Mounting Hole Size: 22mm

Specification：

• Led Color: BLUE
• Operation Type: Latching
• Switch Max Rating: 5A/12V
• Terminal Type: 5 Pins, with socket plug wire
• Material: nickel plated brass + stainless steel
• Great for Electric Switch, Relay, Power Button Switch, Door Switch, Led Switch or any circuit controls

The Wire Connector:

• With the wire connector, you don't need to solder the terminals, make installing very easy Saves the issue of soldering to the switch, and possibly melting it as well You can replace the switch anytime by just unplugging the switch from its socket
• Package includes: 2 x Metal LED Push Button Switch 22mm