13 best electric solenoid

Product description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00009

Size: 1/2"

Flow Aperture: 16 mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: AC 110 V, ± 10%

Current: 0.191 A

Power rating: 21 VA

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 4.8 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Manufactured in China. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

User questions & answers

Question:	Is this value a full bore (1/2" all the way through) or is there some restriction in size
Answer:	It will not fully drain the water out. I cut and re welded the brackets 180* to mount mine underneath.
Question:	Will she blow with a 170 psi pump feeding it
Answer:	this was not what i wanted. i thought this tank had an air compressor. it was my me who ordered the wrong item. i sent it back, and was very satisfied with the assistance from customer service.
Question:	Is this a pressure-assisted valve
Answer:	How does the tank have an auto shut off at 180 psi when the pressure switch is rated at 170-200psi???? the pressure switch opens and closes to complete the circuit. That's how the compressor kicks on and off. Elaborate on how the tank has an auto shut off at 180psi..............
Question:	How long can the valve stay open? Can it stay open for 15 min
Answer:	All female

• Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil.
• Port Size : 1/2" Female NPT , 2W160-15
• Voltage: DC 12V
• Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa
• High quality normally closed electric solenoid valve for air ,water or oil.

User questions & answers

Question:	Can it works outdoor environment? I need to put it in a little underground box with high level of humidity
Answer:	Yes it needs what ever your putting through it, to a minimumal amount pressure going to it open and close. It general used for water, gas and air,
Question:	Is this Selinoid valve rated for use with propane
Answer:	We leave them on all day. we have both types of valves ( norm open/closed) they normally run warm (coil), but are heavy duty & that's normal. Good buy.
Question:	Are there any valves that can be closed 0% to 100% and can have in between positions like, 30% open, 50% open
Answer:	It can be mounted in any orientation you'd like, and I mounted mine upside down. The problem is that the two ports on "top"(now bottom) are not on the exact bottom of the tank. So I'm gonna have to get creative when I want to drain condensation from the tank after use.
Question:	In closed position will the valve allow flow in the reverse direction if there is reverse pressure up to 0.14 Mpa
Answer:	yes there are enough parts, look at the picture, they worked for me

Product features

Beduan Normally Closed Electiric Solenoid Valve

Body Material: Solid Brass

Voltage: DC12V/ DC24V/ AC110V/ AC220V

Working Pressure: 0-145psi

Working Temperature: 23-176°F

Available : Water, Gas, Oil (non-corrosive)

Made of Solid Brass

Thick smooth inner wall without burr, long service life

High quality copper coil

1. The resistance is lower than that of aluminum wire
2. Strong electrical and thermal conductivity
3. Good stability, corrosion resistance and oxidation resistance

Thread clear

The interface thread is clear and not easy to slip, the connection is precise and not easy to leak

Usage Scenarios

1. Clean and rinse the impurities in the pipeline before installation;The thread should be wound with Teflon Tape. Be careful not to drop the debris into the pipeline to prevent blocking the solenoid valve.
2. When installing, keep the arrow direction on the valve body consistent with the flow direction of the medium;If there is reverse pressure, a check valve shall be installed.
3. In order to ensure and extend the service life of the solenoid valve, the installation should be horizontal, the coil is vertical up, not vertical or backward installation
4. After the solenoid valve coil outlet wire (connector) is connected, it should be confirmed that whether the contact of electrical components should be firmly connected should not shake, looseness will cause the solenoid valve not to work.
5. Solenoid valves that are out of service for a long time should be cleaned of impurity condensation before use.
6. Solenoid valves are not suitable for fluids under the following conditions: A.Changing into a liquid by heating and into a solid by cooling; B.Viscosity greater than CST50.

• -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W.
• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.

User questions & answers

Question:	What is the operating time (closed to open) of the valve
Answer:	Modulating valves for fluids , gases etc Pressure actuated gas valves for operating high and low fire etc.
Question:	Would this be good for a train horn set up
Answer:	No, this is a one-way normally closed solenoid valve, it does't allow reverse flow.
Question:	This is described as 3/8" port, but is really 5/8". if i order again, how can i be sure you will send the right part? both the box and label say
Answer:	The npt is 1/2 inch and is measured by the ID. So yes there is
Question:	I want a 12 volt solenoid valve to turn on my extra fuel tank, in the bed of my truck. will the 12 volt coil last, when left on for long periods of
Answer:	You are going to have to read the spec's. Valves have different rating capabilities

Product features

U.S. Solid- 3/8" 12V DC Normally Closed Solenoid Valve, VITON gasket, Solid Brass

U. S. Solid Normally Closed Electric Solenoid Valve; 3/8”ports, brass body, Viton seal, 12 volt DC, for air, water, or fuel

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with three-eighth inch (3/8") female threaded (NPT) connections, and heat and oil resistant Viton gasket.The direct current coil energizes at 12 volts DC;voltage range +- 10%. 18 Watt power rating.

Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 128 PSI; for oil: 0 to 99 PSI; for air or gases: 0 to 128 PSI.(4 mm) flow aperture permits a unidirectional flow capacity of 0.6 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.6 Cv).

Operational temperature range (steady state) -5 to 80 Celsius. It is also designed to withstand short exposures to 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve. In cases where this is necessary, it is recommended user install a computer fan to keep valve cool.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis system, electronic control of tank selection, water line, or motorcycle air shocks.

Manufactured in China. Model: USS2-00006. Quality and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

Direction of the flow (most U.S. Solid Valves are UNIDIRECTIONAL)

National Pipe Thread, Standard USA thread (use Teflon tape to seal)

Product description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00007

Size: 3/4"

Flow Aperture: 20 mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: AC 110 V, ± 10%

Current: 0.191 A

Power rating: 21 VA

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 7.6 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Manufactured in China. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

User questions & answers

Question:	Can this valve be used for ordinary houshold hot water, such as a supply to a dishwasher
Answer:	there is a hot wire, black,which goes to the black wire on the supply line. The other connnexion is to the case of the valve. No pitfalls, but be sure the power is off, but to the awkwrd psotopm/
Question:	is it 120 v AC or 12 v DC
Answer:	No "plug", but you can certainly wire it in.
Question:	How do you connect the valve to power
Answer:	It's a plug/gate valve.
Question:	Does this plug into a 110 bolt timer
Answer:	We have them on our showers and it doesn't seem to affect the flow.

• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

User questions & answers

Question:	I want to remote mount this, are there threaded mounting holes in the valve
Answer:	Dear Mike, this is a NPT thread 3/8". That means that the thread is tapered ( it is actually wider at the opening and slowly tapering down). All pipe threads are tapered ( even the British standard is tapered). If you use something that is not tapered chanses are it will never seal and it will leak. There are actual gauges that test the thread ( I can send you video if you like) and confirm the exact thread.
Question:	I have 1/4 inch ID fuel line, so do I buy this in 1/4 in also and able to buy fittings for my fuel line
Answer:	Even with low current (~ 2A) feeding this valve, when I tried to leave it on for a long time this valve got really hot. My test was about 30 minutes, and I ended up removing the valve from my design. I was hoping to use this as a redundant, fail safe valve, and tried a simple circuit to limit the current at the solenoid, but it still got hot when turned on. Too bad, because for the price this valve is well-built for intermittent operation.
Question:	Could I use this on my sail boat? The tanks are in a propane locker
Answer:	Of course yes. Do not worry
Question:	How many amps will it take to open one of these? Want to use with power adapter
Answer:	It is rated for air, so that would say it’s good for gaseous material and it’s rated for oil which is a hydrocarbon, as is propane so I assume it would work. I have had to solenoids fail in less than a month, so I returned them and opted for a little more expensive product.

Product features

1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (standard USA pipe thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.

U. S. Solid Normally Closed Electric Solenoid Valve; 1/4”ports, brass body, VITON seal, 12 volt DC, for air, water, or fuel

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket.The direct current coil energizes at 12 volts DC;voltage range +- 10%. 12 Watt power rating.

Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI. 1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60°Fwith a pressure drop of 1 PSI (0.6 Cv).

Operational temperature range (steady state) -10° to 120° Celsius (14° to 248°  Fahrenheit).  Suitable for outdoor use; not for use underwater.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve. In cases where this is necessary, it is recommended user install a computer fan to keep valve cool.

 

 

Direction of the flow (most U.S. Solid Valves are UNIDIRECTIONAL)

National Pipe Thread, Standard USA thread (use Teflon tape to seal)

Product description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00001

Size: 1/2"

Flow Aperture: 16 mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: DC 12 V, ± 10%

Current: 1.667 A

Power rating: 20 W

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 4.8 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.

Quality assurance: CE Certified

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

User questions & answers

Question:	Is this the new design with lower heat generation
Answer:	I would say no. I'm no propane expert, but I believe the mechanical relief valve on a standard BBQ style propane tank is close to 300psi (call a gas shop to be sure for your application). This is rated 72psi for gases, so probably best to look for something with a higher pressure rating.
Question:	Would this valve work with a 12v, 2.5 amp signal? I'm stepping down a 24v 5 amp control signal
Answer:	It has an 18 watt rating so 18w ÷ 12v = ~1.5 amps. After setting my rectifier to 12 volts it drew 1.15 amps so you're probably safe between 1 and 1.5 amps
Question:	Could I connect it to power permanently with a "kill switch" of sorts to shut off power/flow in case of an emergency? wanting to use for propane
Answer:	sorry don't know an exact time. was only interested in opening long enough to fill a fuel tank and closing to stop fuel flow.
Question:	can they be run continuoulsy or is over heating a problem? Also, normally closed means no fluid can flow through, right
Answer:	I'm sure it would be. The one I ordered just burned up as soon as I turned it on. I use to have train horns and hooked them up to air and the electric valve I hooked up to regular horn steering wheel. Worked awesome

Product description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a stainless steel body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00069

Size: 1/2"

Flow Aperture: 16 mm

Body Material: Stainless steel

Gasket / Diaphragm / Seal: VITON

Rated voltage: DC 12 V, ± 10%

Current: 1.667 A

Power rating: 20 W

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 4.8 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Quality assurance: CE Certified

• Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

User questions & answers

Question:	How is this any different than any of the other solenoids on amazon? The casing looks exactly the same, right down to the gasket bolts
Answer:	Probably not unless you only use propane for short periods of time. Per the description"Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve"
Question:	Can this get wet? Like if it were installed outside exposed to rain
Answer:	I run them on an agriculture sprayer. I have 50 rows of grapes and it takes me 2 minutes per row, so they are on for two minutes and then off for about 20 seconds while I make a turn and then back on for the next row. They do get hot, but they work. Yes normally closed is off, no flow.
Question:	or 316 stainless steel
Answer:	Cool thankjs for the question. The holes are 5mm and 1/2 deep. But US 10/32 screws fit also. Warning the holes are about 1/8 BELOW the surface, therefore you need a couple tiny washers for spacers to flush mount it. I remote mount it and run alcohol thru it as a "High Rpm Lean" Works great. Warning the solenoid has a .156" hole for fuel flow. You must test to see if your flow is enough. Funny Car Guy. PS We just won NHRA Atlanta
Question:	What is the duty cycle of this solenoid? In other words, how long can it be open before it needs to close and cool down
Answer:	Yes, you buy the fittings that are 1/4 npt and 1/4" out side diameter on the other end to fit your hose on.

• 【Model】2V025-08 Solenoid Valves（2 Way Normally Closed ）
• 【Size】DC12V/1/4‘’NPT（Please air in the direction of the arrow above the product）
• 【Temperature Range/Pressure Range】0-140°F;25-116PSI
• 【Feature】 A valve response rate of up to 5 times per second
• 【About Fittings】In each product, we provide 1/4 Push to connect fittings, you don't need to buy again, just insert 1/4 "or 6mm tubes.

User questions & answers

Question:	How easy are these to take apart completely to clean if they get gummed up
Answer:	My husband says 304.
Question:	Can this be used for potable drinking water? Is it lead-free
Answer:	The listed (on box) duty cycle is 8 hours open.
Question:	what is the flow rate at 100 psi
Answer:	Not sure , mine is on a timer which turns it on for a couple hours to refill a water tank. I never noticed any heat from it.
Question:	Do these work at 0 PSI
Answer:	This solenoid shows to be rated for 1.67 amps at 12Volt DC, so it should work for you.

Product features

2 Position 2 Way Solenoid Valve

• Type: 2 Way 2 Positions
• Inlet = Outlet = 1/4‘’NPT
• Pressure Range:25-116PSI
• Temperature Range: 0-140°F
• Voltage: DC12V
• Operation Type:Internally Piloted Acting Type
• The Solenoid Valve is Equipped with an Ed 100% Encapsulated Coil for Continuous Service and Continuous Energizing.

High Frequency Guide

Pure Copper High Precision Pilot Head Up To 5 Times/second Air Valve Precision, Smooth Without Stuttering.wide Application Range, High Sensitivity.the Use Of Sufficient Red Copper Coils, Long - Term Use Is Not Easy To Hot.

Simple Function Diagram

In The Non-energized State, The Inlet And Outlet Are Closed.in The Energized State, The Inlet And Outlet Holes Open.

Waterproof Box Coil Cover

Comes with a Ed 100% Encapsulated Coil Which Suitable to Operate in Continuous Service and Constant Energized.

Product description

Feature:

Port Size : G1/4"

Model Number: 2V025-1/4-12VDC

Seal Material: NBR (Buna N)

Armature Tube Material: Brass

Body Material: Anodized Aluminum

Plunger & Spring Material: Stainless Steel

Response Time: Less than 20 ms

Port Size: G1/4" DN8

Operating Temperature: -10 to 80 °C

Coil Power: 6.5W

Coil Duty: 100% ED (Continuous Duty)

Coil Voltage: DC12V,

Service Media: Air, Gas, Liquid, Water

Valve Type: 2 Way Normally Closed (Valve opens with energized)

Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)

Operating Pressure: 0.05 - 0.7Mpa(can be operated at 0 PSI (Vacuum))

Package included:

1 x 1/4inch DC 12V Electric Solenoid Air Valve

• .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
• .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum).
• .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
• .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
• .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.

User questions & answers

Question:	Do you have normally open
Answer:	The longer it's active the hotter it will get. But it shouldn't get to hot. If it's activated for thirty minutes it might be too hot to hold on your hand but not hot enough to melt the case.
Question:	Will it work with 120 psi air pressure
Answer:	Current draw of this is just over .5 amps.
Question:	how hot should the coil get
Answer:	Yes! 1/4” pipe OD is 0.540. You loose a bit when its threaded.
Question:	What is the current draw of this solenoid
Answer:	No. This one is for 3/8 hose. On the same page there is one for 1/4'' hose. This link should take you to the 1/4''. https://www.amazon.com/dp/B07TT6P4TB?ref_=pe_527950_33920250_dpLink&th=1

Product description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality stainless steel body, one inch (1") female threaded (NPT) connections, and Viton gasket. Suitable for use with hot or cold water, gas, air, oils, very low viscosity fluids (< 20 cst) and gasoline or other petroleum based liquids.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00011

Size: 1"

Flow Aperture: 25 mm

Body Material: Stainless steel

Gasket / Diaphragm / Seal: VITON

Rated voltage: AC 110 V, ± 10%

Current: 0.2 A

Power rating: 22 VA

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 12 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 12 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, gasoline, diesel fuel, kerosene, etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Manufactured in China. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

• Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
• This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

User questions & answers

Question:	Can this valve be opened manualy
Answer:	I don't have a exact answer, but the holes are really small, about 1/16" . If you need a full flowing valve, look somewhere else.
Question:	Will this Valve work if mounted vertically
Answer:	I’m using them on a vacuum system and they work just fine
Question:	is this applicable for LPGas
Answer:	It didn’t work for me.
Question:	can it be used out doors
Answer:	The valves all have a rating of IP65, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the motorized ball valve in some protective housing.

Product description

Operation Mode:Normally Closed

Inlet/Outlet Ports: 1-1/2-inch

Working Pressure:0-0.7Mpa

Plunger Tip:NBR

Suitable Media: Water Air

Installation: Fluid direction should be as the arrow shows

• Voltage:AC 110V Solenoid Valve
• Inlet/Outlet Ports:1-1/2-inch Female NPT Threads
• Operation Mode: Normally Closed
• Valve Type: Direct Acting, Wet Armature
• Body Material: Brass; weight: 2085g

User questions & answers

Question:	how many amps does the coil draw
Answer:	No
Question:	How long does it take for the valve to open? Does it open slowly or instantly
Answer:	It can not be submerged. However you can use it outside in a box to keep the rain off of it.
Question:	I need one valve that's normally closed and one that's normally open. 120vac. 1.5" or 2". are there any? (diverter
Answer:	You remove the black piece by turning a nut by hand, and then remove 2 phillps bolts underneath. The valve pops open easily.
Question:	is this a full-flow 1 1/2" inside
Answer:	They offer one for water. I'm sure it will work.

User questions & answers

Question:	Is this a butterfly or a gate valve
Answer:	Yes，we can create a new list for you. What size and voltage do you want exactly?
Question:	At 40 PSI what kind of flow rate do you get? On the 1/2 inch NPT valve, 12 DC version if that matters
Answer:	It is a full-flow 1 1/2 “ inside
Question:	Which wires are positive and negative on the 12v model
Answer:	no.
Question:	What amperage are these at 12v DC
Answer:	Most will make sure v it is mounted in the correct direction

Product features

Product Description

The electromagnetic valve is composed of an electromagnetic coil, an iron core, a spring, a diaphragm and a valve body. The diaphragm effectively isolates the iron core, the spring and the coil from the valve body. During operation, the electromagnetic coil is energized to generate a magnetic field, which controls the iron core to pull the diaphragm against the resistance of the spring and open or close the input and output ports.

• 【Model】2W025-08;Voltage: DC12V
• 【Size】1/4 inch NPT
• 【Material】brass
• 【Pressure range】0-145Psi【Working temperature range】23-176°F
• 【Applicable】Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)

User questions & answers

Question:	Would this work to turn vacuum on and off to an accessory when used on the intake manifold of an engine
Answer:	The wires are reversible on this one. Works either way. Just verified on the one I own
Question:	What size screws are used to mount these
Answer:	Amperage draw with 18AUG @ 20feet, 12.7VDC is 1.2Amp.
Question:	Which color wire is positive, Yellow or Blue
Answer:	I bought 2 valves, not a good valve and not for continues duty, Coil gets hot and very noisy. I replaced both valves less than 3 months.
Question:	do you have the same but normally open
Answer:	It open instantly.

Product features

Brass Normally Closed Electiric Solenoid Valve

• Model: 2W025-08
• Type: 2 Way 2 Positions.
• Size:1/4''NPT
• Max Pressure：145Psi
• Temperature Range: 23-176°F
• Voltage:12V
• Operation Type: Internally Piloted Acting Type
• Position & Way Number: Two-position,Two-way

Diaphragm Spring

Stainless Steel Pilot Head, Oil Resistance, Aging Resistance, Long Service Life.

Brass Valve Body

This valve's body is made of solid brass (very corrosion resistant material).Tube Wall Thick, Corrosion - Resistant.

Full Copper Core Coil

Copper Core Coil, Using German Winding Technology to Make It More Tightly Wound.

Product Feature

1. Compact size, easy to assemble and disassemble.
2. The Valve Body is Made of Brass and Has Strong Pressure Resistance,good Seal, Safe and Reliable to Use.
3. The Inner Hole is Machined by a Special Process, with Low Frictional Resistance, Low Starting Air Pressure and Long Service Life.
4. Please Pay Attention to the Direction of Gas Flow and the Correct Connection when Installing. Pay Attention to Dustproof.
5. Air Solenoid Valve Has Single Control Solenoid Valve Have Internal Pilot Structure, Sliding Column Structure, Good Sealing and Responsive.