13 best deck jigs

Product description

Create a better, more-beautiful deck with the Kreg Deck Jig . This concealed-fastening system works together with Kreg Deck Screws to allow you to install decking without visible fasteners, so all you see is the beauty of your decking instead of a bunch of screws. The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes, and to guide Deck Screws to attach decking from the edge solidly and invisibly—whether you’re using solid-wood or composite deck boards. The Deck Jig makes drilling the stepped pilot holes and driving screws easy in all situations thanks to three hardened-steel guides—one at 90° to the board edge, and two at opposing 45° angles—that allow easy access when working near walls, as well as when creating strong joints where boards butt together end to end. The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw, while a stop collar ensures prefect drilling depth. After drilling, just drop a Kreg Deck Screw—an integral part of this concealed-fastening system—into the same guide, and then drive it with the included square-drive driver bit. It’s equipped with a stop collar, too, to ensure that the self-tapping, case-hardened screw gets driven to the perfect depth. The aggressive threads bite securely into the joist, while the smooth upper shank and flat-bottom head work together to pull the deck board tightly into place. The Deck Jig Concealed-Fastener System works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated wood—kiln-dried after treatment (KDAT) recommended.

• The Kreg Deck Jig helps you get the deck you want, without any unsightly exposed nails or screws
• Hardened-steel drill guides keep the stepped drill bit and driver bit at the precise, optimal angle
• Three hardened-steel drill guides let you install deck boards in a variety of hard-to-reach areas
• Works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated wood—kiln-dried after treatment (KDAT) recommended
• Easy-grip handle gives you a secure hold and complete control over each and every joint

User questions & answers

Question:	Can I use narrower spacers, let's say
Answer:	Not sure but as long as the diameter of your exercise bike handlebar is comparable to that of a standard bike, I assume this extension can be used.
Question:	can this work with 2x4/2x6 (1 1/2 inch width) wood
Answer:	They are aluminum, they seem very strong. In the other hand the bar doesn't seem to be as strong as the joining pieces. I have it mounted on my bike with two lights, and use it to rest my hands when riding my road bike.
Question:	How this better as compare to camo pro-x1 guide
Answer:	Hello, Install the handlebar extender to your bicycle handlebar, add extra storage space for the bicycle to fix bicycle lights, speedometers,GPS or phone holders, etc. The length of the bicycle extender is 25 cm, suitable for bicycles with handlebar diameter between 18-34mm. For details, please check the second size picture and the fourth product usage picture
Question:	Has anyone had problem fitting the screws through the jig? i bought the kreg deck screws, and do not fit. they also are not square drive
Answer:	Hi, our bike handlebar extender suitable for bicycles with handlebar diameter between 18-34 mm.

Product features

Kreg Deck Jig

Create a better, more beautiful, comfortable, longer-lasting deck

Product description

Master your deck with the Jig-A-Deck. The Jig-A-Deck evenly spaces 4" or 6" wide decking with a 1/4" gap and ensures that all your field and joint placement screws are perfectly aligned and in their exact position every time. Comes in a 2-piece set.

• Helps create a straight line of screws across your whole deck
• JIG-A-DECK allows you to professionally space & fasten deck boards in a fraction of the time
• Allows perfect fastener spacing for both 4" & 6" wide deck boards
• Helps provide perfect 1/4" spacing
• Excellent for use with hardwood, composite PVC & pressure treated decking

User questions & answers

Question:	Is this plastic or metal... and has anyone used for installing boards with no gap at all by not inserting between boards
Answer:	I have had multiple pairs on my drz and I love them. They’re pretty much only good for one decent drop on the street before they bend though.
Question:	Does this come in a 3/16" gap
Answer:	YES
Question:	Has anyone used this for a fence
Answer:	No clue! Got this as a gift for my son-in-law!!? Sorry!
Question:	What is the spacing between the two prongs? I’m wondering if it would straddle the 4” part of a 2x4 when building a fence
Answer:	No. You need ATV bars for an ATV. These are for motorcycles.

Product description

These handy 1/4" spacer rings ensure accurate deck board sspacing for proper drainange and a longer deck life. Choose between 1/4" and 5/16" sizes. This kit includes 12 1/4" Spacer Rings

• 1/4" Spacings
• Durable, highly-visible plastic.
• Large easy-grab ring
• 12 Rings for long spans

User questions & answers

Question:	How deep does the tongue piece go
Answer:	Both systems work in generally the same way, being that they drive a screw at an angle through the guide. The benefit is that your deck boards are attached without a visible screw. The Kreg system has two advantages that made me choose it over the Camo system. The first is that the jig itself is much more substantial. You are able to but a lot of weight into the jig, which helps you manipulate your deck boards. This is important as deck boards are rarely true; they typically require some bending along one or two edges. The second big advantage is that the Kreg jig allows you to attach screws at an angle, which is nice when you're at the edge of a board or have an attachment point that isn't necessarily at 90-degrees to the deck board.
Question:	Do they float in water
Answer:	Hello, We do apologize for the inconvenience, and yes there has been a few cases where the screws do not fit through the bushings. Also, the head of the screws were never a square drive. Please contact technical support at 1800-447-8638 if you are experiencing any issues with our product. Thanks!

Product description

This durable hardened steel driver bit is designed for exclusive use with the Kreg Deck Jig. It features a quick-change compatible shank and a magnetic tip. Depth collar and allen wrench included.

• Hardened Steel for long life
• Quick Change Hex Shank
• No. 1 Square Drive
• Magnetic Tip
• Included Depth Collar and Allen Wrench

User questions & answers

Question:

does Kreg's make a T-15 drive bit for the deck jig

Answer:

I'm not sure I understand the question. The screws are flat-head, so they won't protrude, and they are chrome in color, and of course they have the Philips head markings on them so they can be screwed in. I'm not sure what you mean by "clean," however. I have ordered them myself, and they are not "dirty," if that's what you're asking! The question you need to ask is what is the proper length and gauge for the work you're doing.

Product description

This Durable Hardened Steel Drill Bit Is Designed For Exclusive Use With The Kreg Deck Jig. It Features A Quick-Change Compatible Shank And A Uniquely Designed Stepped Tip. This Stepped Design Creates Both The Guide Hole For The Screw And The Shoulder Which Secures The Head Of The Screw In One Plunge Of The Bit. The Bit Itself Is Built From High Quality Stainless Steel And Features Aggressive Fluting Which Clears Material From The Hole As Its Drilled., Specialized Stepped Tip , Ktx/#1 Square Drive Reduces Cam-Out , High Quality Durable Steel , Quick Change Compatible Contains 6 In. Deck Jig Drill Bit, Depth Collar And Allen Wrench.

From the Manufacturer

This durable hardened steel drill bit is designed for exclusive use with the Kreg Deck Jig. It features a quick-change compatible shank and a uniquely designed stepped tip. This stepped design creates both the guide hole for the screw and the shoulder which secures the head of the screw in one plunge of the bit. The bit itself is built from high quality stainless steel and features aggressive fluting which clears material from the hole as its drilled.

• This durable hardened steel drill bit is designed for exclusive use with the Kreg Deck Jig
• It features a quick-change compatible shank and a uniquely designed stepped tip
• This stepped design creates both the guide hole for the screw and the shoulder which secures the head of the screw in one plunge of the bit
• Hardened stainless steel
• Quick-Change compatible
• Tip features stepped design
• .215-Inch diameter drill bit

User questions & answers

Question:	Can this bit be used with a regular kreg pocket hole clamping jig
Answer:	Worked for us on several similar projects - use quality screws and it should work fine!
Question:	Can this bit be used with a regular kreg pocket hole clamping jig
Answer:	I use the grip rite guard PGP300CBK number 2 square head 3 inch collated exterior deck screws.. works super well with this screw gun..
Question:	Bit length
Answer:	I assume you're referring to the screws that work with me screw gun that are on a plastic belt. The drive part on the gun itself is just like a regular drill per se with a gears drive. The screws I use in this gun we're just made by "grip rite" there collatedd screws on a flexible plastic strip. These screws were readily available at home Depot.
Question:	What type/size/length of screws do you use
Answer:	For these screws you will need a T20 bit.

Product description

The Kreg Deck Jig helps you get the deck you want, without any unsightly exposed nails or screws Concealed-fastener system for installing deck boards Easy-grip handle gives you a secure hold and complete control over each and every joint Hardened-steel guides keep the stepped drill bit and driver bit at the precise, optimal angle Three lifetime-warranted, hardened-steel drill guides let you install deck boards in a variety of hard-to-reach areas Handy spacer rings ensure accurate deck board spacing for proper drainage and longer deck life Specifications Features: Installs concealed deck fasteners, Three hardened-steel drill guides Construction: Impact-resistant polymer, hardened steel Adjustability: Adjustable stop collars for 4/4, 5/4, and 2-by decking Capacity: 4/4, 5/4, and 2-by (1 1/2"-thick) decking material Includes: Deck Jig, Deck Jig Drill Bit, Deck Jig Driver Bit, Stop Collars, Hex Wrench, ¼" Spacer Rings, Owner's Manual KREG SDK-C2W SCREWS Kreg Deck Screws were designed specifically for use with the Kreg Deck Jig These screws feature a highly weather-resistant Protec-Kote finish which protects them from the elements Protec-Kote--Three weather-resistant layers protect against corrosion in a wide variety of decking applications Protec-Kote Finish highly weather resistant Flat bottom head creates secure hold, won't split the workpiece Self-Tapping tip drills a hole while it's driven KTX Square Drive provides incredible cam-out resistance, less spinning, more driving

• Bundle Includes: Deck Jig, Deck Jig Drill Bit, Deck Jig Driver Bit, Stop Collars, Hex Wrench, ¼" Spacer Rings, Owner's Manual and 1400 count 2-Inch 8 Coarse Deck Screws
• This bundle allows you to built a deck up to 20' x 20'
• The Kreg Deck Jig helps you get the deck you want, without any unsightly exposed nails or screws

• ▼ This listing: Red, 1/8" (3.2mm) spacing. ▼ Other options: Red 1/8", Orange 5/32", Yellow 13/64", Green 1/4", Blue 5/16" or MIX Pack (4 pcs of each size).
• ▼ Place spacers between installed and uninstalled deck boards to unify the spacing gaps, pull out spacers after installing each board. Useful tools for your decking project !
• ▼ Durable, bright-colored plastic for easy finding the right spacer size. ▼ Unique circular corners + blade slice design for no denting and marring to deck boards.
• ▼ 20 pieces in box for long spans decking. ▼ Included plastic box with lid and carrying handle for easy storage.
• ★★★ More Myard decking products: 2"x4" Railing Connectors, 4"x4" Post Base, 4"x4" Post Caps...

User questions & answers

Question:	Are these used only for composite decks? Wood deck planks shrink as they dry. Using these would make the spacing too wide
Answer:	The Kreg Deck Jig will work with 1 1/2" thick material. You will simply want to use the 2 5/8" Kreg Deck Screws.

Product features

Deck Post Base Cover Skirt Flange with Screws (4x4 and 6x6 inches)

▼ 2 sizes options: 4"x 4" post (actual 3.5"x 3.5" dry post on market) ; 6"x 6" post (actual 5.5"x 5.5")

▼ Perfect for deck supports, porch railing, handrails and post holders. Also, can be used as table leg / mailbox post support brackets.

▼ Sanding / trimming may be required depending on post type and little size error.

▼ POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ▼

▼ Made from paintable durable High-Strength Nylon + Anti-UV + FRP (Fiber Reinforced Plastic). NO fading, aging, and weakening from sun exposure. UV-resistant.

▼ Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board.

▼Thicker & higher post base bottom for better structural strength on decks.

▼ Clean contemporary style. Re-designed for better looking. Fast & easy post installation in minutes.

Deck Foundation Block for 4x4 Inches posts and 2x4 lumber stud joists

▼ QUICK BUILD: Stackable & light. Easy & instant to ship, carry, position and install. Only weights 2 LBs/each, replaces heavy concret (50 LBs).

▼ APPLICATION: Quick foundations for home improvement projects such as deck, garden shed, landing, walkway, BBQ area, poolside, cubby house, dog shelter and more.

▼ CAPACITY: Each block designed to support up to 1700 LBs. Bigger bearer footing pad size 12"x12".

▼ COMPATIBILITY: Four way recess to accept standard 2"x4" (actual 1.5"x3.5") lumber stud joists; Accepts 4"x4" (actual 3.5"x3.5") or 100x100mm posts.

▼ OPTIONAL HOLES: 5 holes on top platform for wood screws; 4 holes at corners for ground anchors.

▼ QUALITY MATERIALS: 100% New Polyamide #66 engineering plastic used + Glass fiber reinforced + High rating Anti-UV added.

▼ NOTICE: It is recommended to check your local building guidelines / code before starting your project.

▼ Not for post or beam go tight into a corner.

Deck Railing Connectors with Screws for 2x4 (Actual 1.5x3.5) Inches Stair Wood Handrail

▼ Includings: 1 pairs (equals 2 pcs) of deck rail bracket connectors, 12 pcs black coating Stainless Steel #304 screws.

▼ Easily and accurately install the 2"x4" railing (actual 1-1/2" x 3-1/2") to post at 90 degrees. Stair railing connectors are also available.

▼ Sanding / trimming may be required at railing ends' corners and edges due to wood external size error.

▼ Myard Railing Connector works on wood and composite railings.

▼ Upgraded materials: Nylon + Fiber + Anti-UV. 2 times more durable than normal ABS, PP... products.

▼ Color options: Black, Red.

▼ Each connector 4 holes at side for installing railing to post with 4 screws at 30 degrees (weight capacity 50% more).

Deck Screw-Free Universal Fence Pyramid Top Cap fits Post 4 x 4 Inches (Actual Post Size 3.5 x 3.5)

▼ *** IMPORTANT: Fits standard posts of 4x 4 (actual 3.5"x 3.5") inches. See images, or ask us if any questions before ordering. Thanks.

▼ Matte/fog surface on top; Matte/fog surface on bottom base.

▼ 5 holes at bottom base for gluing on 4"x 4" post. (see images)

▼ Screw-FREE (Nail-FREE) installation. ONE-PIECE structure, solid and durable. Pack of 1. Sanding / trimming may be required depending on post type and little size error.

▼ Made from HIGH impact, UV stable (anti-UV) ABS resin. Same as Golf Course Sprinkler head.

Iron Steel Balusters for Deck Railing Handrail Porch

• Classic Round - (diameter: 3/4"), in Length 26", 29", 32", 36"
• Estate Square - (cross section: 3/4" x 3/4"), in Length 26", 29", 31", 32", 42"
• Estate Square Facemount - (cross section: 3/4" x 3/4"), in Length 31", 42"
• Large Classic Round - (diameter: 1"), in Length 26", 29", 32", 36"
• Large Estate Square - (cross section: 1" x 1"), in Length 26", 29", 32"
• Traditional Rectangle Facemount - (cross section: 1" x 1/2"), in Length 26", 29", 32", 36"
• Straight Flat - (cross section: 1" x 1/8" solid), in Length 29-1/2", 32-1/4"
• Baroque Curve - (cross section: 1" x 1/8" solid), in Length 32-1/4"
• Arc Curve - (cross section: 1" x 1/8" solid), in Length 32-1/4"

Product description

Drill Guide for Cable Railing Kit Lag Screw Fitting Wood Post Installation, Fit 90 Degree

Horizontal Deck and 30&45 Degree Angled Stair Railing, Aluminium 4 Kinds of

Holes Silver Drilling Template Jig



To install a great cable railing requires right tools and your patience,

we are sure you will complete your project successfully with this tool.



Choose premium aluminum alloy material with excellent surface oxidation treatment,

which has great performance on rust resistance, wear resistance and durability.



This cable railing drill template guide jig offers 4 different size guide track holes

(fit 3/16”,1/4”, 5/16”,3/8” drill bit), those are compatible with most cable railing kit hardware.

• ☞ Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight hole and 30&45 degree angled hole for the wood railing post. The success of DIY cable railing projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill.
• ☞ Heavy duty material - Choose premium aluminum alloy material with excellent surface oxidation treatment, which has great performance on rust resistance, wear resistance and durability.
• ☞ Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), those are compatible with most cable railing kit hardware. The hole drilled by 1/4-inch drill fit most 1/8" cable railings lag screw.
• ☞ Safe and easy operate - This handrail drill guide work with 6” woodworking F clamp no shaking and safer drilling angle 30°&45° inclined hole and 90° horizontal vertical straight hole for 4”x4” posts and lager clamp for lager posts. F clamp is not included.
• ☞ Portable - This drill guide for cable railing is light and small pocket carrying, compact and easy to carry.

Product description

Head Style : Flat



Drive Style : Internal



Drive Type : Square



Drive Size : #0



Thread : #4



Overall Length : 1/2"



Head Diameter : 0.217



Head Height : 0.082



Thread Diameter : 0.112



Coarse or Fine Thread : Coarse



Thread Coverage : Partial Thread



Thread Length : 0.300



Square Drive is often criticized for its tendency to cam out at lower torque levels but this was actually a deliberate feature of the design, for the purpose of assembling aircraft without overtightening the fasteners



The shank of the wood screw allows the screw to spin freely inside of the outermost piece of wood like door hinge for draw wood head board the inner piece tight against it by having the threaded end grip the wood and pull



Flat heads are countersunk with a cone shaped bearing surface and a flat top that is used in applications where the head of the fastener must sit flush with the mating surface



These fasteners are the choice for antiques, doll houses, miniatures, boats, jewelry boxes, and all other projects requiring an old fashioned appeal



This material of steel is the preferred material used in the wood enviroment and wood industry due to its resistance to pitting corrosion



Solid brass steel has high resistance to corrosion from industrial chemicals



Square drive is a cross head design and is the most commonly used type

• Drive Style : Square Brass Brass Sheet Screws For Mdf Board
• Head Style : Flat Head Pocket Screw Jig Kit
• Thread : Partial Thread Wood Clamp Pocket Hole Jig Screws
• Solid Brass Door Pocket Screws Box Joint Jig Small Screws
• Wood Screws Are Specifically Designed For Use In Wood Head Board

Product description

The CAMO Edge Deck Fastening System is a fast, easy, and affordable way to install a fastener-free deck surface. Patented CAMO Edge Deck Screws have a rake tip that augers material out as you drive. The Pro-NB Guide allows you to quickly install these screws through the edge of the deck board—not the surface. To use the Pro-NB Guide, attach one of the included driver bits to your drill, load Edge Deck Screws on both sides of the Guide, and drive. It’s that easy! The built-in shoulder on the driver bit sets an automatic depth of drive which prevents over-driving the screw. The Pro-NB Guide is ideal for narrow board treated lumber, cedar, hardwood, composite, and PVC decking. It fits any 3-1/4 in. (83mm) to 5 in. (127mm) deck board and creates an automatic 3/16 in. (5mm).

• Pro-NB Guide installs two patented CAMO Edge Deck Screws through the edge of the deck board—not the surface
• For exclusive use with CAMO Edge Deck Screws that auger material out to reduce splitting and cracking
• Attach included driver bit to your drill, load Edge Deck Screws on both sides of the Pro-NB Guide, and drive more tools
• Pro-NB Guide is ideal for narrow board treated lumber, cedar, hardwood, composite, and PVC decking
• Fits any 3-1/4 in. (83mm) to 5 in. (127mm) deck board and creates automatic 3/16 in. (5mm) spacing

User questions & answers

Question:	Can you use it on 2 X 6 redwood
Answer:	Sorry, the Jig -A-Deck only comes with a 1/4" spacer.
Question:	Is it possible to use this for straight-in fastening? Like a 2x4/4x4 sandwich? And/or for toe-nailing a 2x4? If not, can you recommend something
Answer:	It would work fine for a fence as long as you are happy with the spacing.
Question:	Can any model of this tool span two 1" x 4" (nominal) Ipe boards, with spacing, i.e. holding one piece against a piece already screwed down
Answer:	The spacing is an inch and a half so it only fits the edge of a 2x4, not the face.
Question:	Will the marksman® pro-nb work for a 1”x 4” horizontal fence
Answer:	The Kreg Deck Jig will need at least a 1/4" spacer in order for the system to work correctly.

Product description

The Kreg 2-5/8 Deck screws are designed to work with the Kreg Deck Jig System on 2X decking materials. These screws can also be used as a general fastener on thicker materials.

• These screws are coated with the Protec-Kote weather resistant material
• Protec-Kote-Three weather-resistant layers protect against corrosion in a wide variety of decking applications Recommended for ACQ treated lumber
• Using the Kreg Deck Jig on 2X and thicker decking materials requires special instructions These can be downloaded at kregtoolcom/2x
• 525 Count

User questions & answers

Question:	Will these work on screwing wood to metal
Answer:	Dear Amazon Customer, Yes, green/new deck wood boards will shrink, but all depend on: 1. What kind of deck board you use? 2. What is the shrinkage rate/range of your deck boards? 3. When you install? Summer (shrinkage in winter)? Winter (small or no shrinkage in winter, but might expand a bit in summer)? 4. How wide you want the gaps will be? 5. Consult with your deck wood vendor and do the math to have the final decision of our "Myard Deck Board Jig Spacer". Hope this helps. Thank you for your question and interest. PayandPack stores
Question:	what type if bit shape do they use
Answer:	The tongue on the Kreg Deck Jig Spacer is .9" deep.
Question:	Where are the stainless version of these available
Answer:	They are made of plastic,,, mostly will float!!!!!
Question:	Will these screws work with Composite decking
Answer:	Plastic. The handle is the spacer, which is removable. You can lay it on top of the board and line up to use as a template.

Product description

KREG SDK-C2W-700 2-Inch, #8 Coarse, Deck Screw, 700 Ct

From the Manufacturer

Kreg Deck Screws were designed specifically for use with the Kreg Deck Jig, and they can also be used as simple face-screws for a variety of outdoor projects. These screws feature a highly weather-resistant Protec-Kote finish which protects them from the elements.

• Kreg Deck Screws were designed specifically for use with the Kreg Deck Jig
• These screws feature a highly weather-resistant Protec-Kote finish which protects them from the elements
• Protec-Kote--Three weather-resistant layers protect against corrosion in a wide variety of decking applications
• 700 Screws
• Protec-Kote Finish highly weather resistant
• Flat bottom head creates secure hold, won't split the workpiece
• Self-Tapping tip drills a hole while it's driven
• KTX Square Drive provides incredible cam-out resistance, less spinning, more driving

User questions & answers

Question:	What's the difference between this and KREG SDK-C2SS-700 2-Inch, #8 Coarse, Stainless Steel Deck Screw, 700 Ct
Answer:	There are two versions of the Marksman Pro - the standard Marksman Pro which works on 2x6s but not 2x4s and the Marksman Pro NB which works on 2x4s not 2x6s. Redwood would be fine. I used cedar but either would be great. This is a very good fastening system for deck boards.
Question:	Can these be used in pressure treated wood
Answer:	Not straight in fastening. But would be possible to bond two 2x4's together by the tool by toe screwing them together
Question:	would these hold up on a fresh water lake side dock
Answer:	Yes I used the CAMO Marksman Pro-NB Toolfor my Ipe 3/4" x 3 1/2" boards. Worked great! I says it fits 3/4" x 3 1/4" to 1" x 5". It can do 1 1/2" thick too I beleive.
Question:	What is the square footage for a box of
Answer:	Yes, it will. The Pro-NB will work on boards from 3"-4 5/8", plus or minus 1/16". I just tried mine on some cedar fencing which is less the 3/4" thick, but it works fine with the short screws (1 7/8").