12 best makita framing nailers

Product description

The Makita 3-1/2” framing nailer (model AN924) combines durable construction and robust performance with ease-of-use features for commercial framing applications. The AN924 is engineered for a range of applications including framing walls, floors, and roofs, construction of sub-flooring, roof and floor decking, floor and wall sheathing/Siding. It is ideal for framers, roofers and carpenters. The AN924 accepts full round-head nails, 2” - 3-1/2”, with up to . 148” (16D) shank diameter, and the 2-mode selector switch (bump, sequential) provides increased convenience. The AN924 is engineered for longer tool life and ease-of-use, with a built-in air filter to minimize dust and debris from entering. Additional features include an anti-dry mechanism that stops the tool when three nails remain in the magazine, a solid rear-loading aluminum magazine for longer service life, and rubber hand-grips to provide more comfortable handling.

• Faster nail driving speed for maximum performance
• Large capacity air chamber for increased power to drive nails up to 3-1/2" X. 148 in diameter
• Drives 21º plastic collated framing Nails from 2" To 3 1/2" In length and. 113 too. 148 in diameter
• Lightweight design at only 8. 3 lbs
• Solid top-loading aluminum MAGAZINE for longer life

User questions & answers

Question:	Why is mine making a whoopie custion sound when it fires
Answer:	Sounds like a seal or o ring is out
Question:	Does it come with rafter hook
Answer:	Yes it does come with a hook
Question:	does this Makita come with a carrying case
Answer:	No caring case Great nail gun.
Question:	New to nail guns. Are the nails proprietary to the manufacturer or can you use other brands
Answer:	you can use other brands works great

Product features

Makita AN924 21º Full Round Head 3-1/2" Framing Nailer

The 21º Full Round Head 3-1/2" Framing Nailer (model AN924) combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.

The AN924 drives 21º plastic collated framing nails from 2" to 3 1/2" in length and .113 to .148 in diameter. It has a 2-mode selector switch (bump, sequential) for increased convenience. The AN924 has a lightweight design (only 8.3 lbs.) with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine, and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook, and an ergonomic rubberized grip.

Product description

Makita AN902 3-1/2" Framing Coil Nailer. The 2-mode trigger allows the operator to select sequential or contact nailing options. It has a "Tool-less" depth adjustment engineered for more precise flush and countersink nailing. Easy access nose design for clearing jammed nails. The easy loading canister with nail size adjustment provides maximum versatility. Also it has a rubberized handle for better fit and added comfort. It drives 1-3/4" to 3-1/2" 15Degree coil framing nails. The rubber bumpers protect tool housing. The metal exhaust cover plate is engineered for increased tool life. There are sharp, pronounced spurs that grip wood for controlled nailing at an angle. The magazine holds up to 300 nails for high productions applications. It is ideal for framing, sheathing, fencing, decking, pallets, crating and more. It includes a no-mar tip to help prevent damage to work surface.

• 2-mode trigger allows operator to select sequential or contact nailing operations
• ""Tool-less"" depth adjustment engineered for more precise flush and countersink nailing
• Drives 1-3/4"" to 3-1/2"" coil framing nails
• Easy access nose design for clearing jammed nails
• Easy loading canister with nail size adjustment provides maximum versatility
• Rubberized handle for better fit and added comfort
• Rubber bumpers protect tool housing

User questions & answers

Question:	Plastic coillated compatible
Answer:	Yes. I have shot those exact nails in my gun.
Question:	How much pressure can it go up to
Answer:	It is!! But you need to be aware that this nail gun won’t fix regular nails sale on Home Depot or Lowe’s. Which are 21 degrees those are the most common use by framing
Question:	can we use our local nail for this nailer
Answer:	Yes - SN890CH(3)34 SuperFramer has the Single Fire or Contact (Bump) Fire option. Easy switch trigger allows option. When Contact Actuation is engaged it includes an Anti Double Fire Mechanism.
Question:	Will the AN902 shoot a wire collated 3” siding nail
Answer:	Yes. This gun accepts spotnails, Senco, hitachi, porter cable and grey nails. I haven’t found a nail that doesn’t work.

Product description

3- Mode Selector switch allows user control over firing options, Quick 2-step loading process reduces downtime, Built-In air filter minimizes dust and debris from entering tool.

• 3-mode selector switch (contact, sequential, lock) allows user control over nailing options
• Large capacity air chamber for increased power to drive nails varying in length from 2"" to 3-1/2""
• Built-in air filter minimizes dust and debris from entering tool
• ""Tool-less"" depth adjustment engineered for more precise flush and countersink nailing
• Retractable hook allows tool to remain close by but never in the way
• Sharp, pronounced spurs grip wood for controlled nailing at an angle
• To prevent dry firing, tool stops when three nails remain in the magazine

User questions & answers

Question:	Will this shoot 16 guage nails
Answer:	I purchased a MaxNF665/15 about 4 months ago and "yes" it does come with a Max hard case. Its a pretty solid plastic carrying case with the Max logo in orange.
Question:	how is it?Does it work well
Answer:	Upon completion of operations, place 2 or 3 drops of oil into the air plug inlet with the oiler. (Recommended Oil : ISO VG32)
Question:	How much does it weigh
Answer:	The nails are straight nails, but they feed at an angle the purpose is to get into tight corners Be careful to only buy the proper pitch of the collated nails as max is different than many senco models The gun works awesome I’m a big fan of max nailers
Question:	Does makita make a case for this nailer
Answer:	Yes it does

Product features

Makita AN923 3-1/2 inch Framing Nailer, 21° Full Round Head

The Makita 3-1/2 inch Framing Nailer (model AN923) combines rugged construction and robust performance with ease-of-use features for commercial framing applications. The AN923 is engineered for a range of applications including framing walls, floors, and roofs, construction of sub-flooring, roof and floor decking, floor and wall sheathing/siding. It is ideal for framers, roofers and carpenters.

The AN923 accepts full round-head nails, 2 inch - 3-1/2 inch, with .113 - .162 shank diameter (plastic or wire collated). The 3-mode selector switch (bump, sequential, lock) provides increased convenience, while the 'tool-less' depth adjustment offers nine settings to drive nails to a precise level on the wood’s surface. The AN923 is engineered for longer tool life and ease-of-use, with a built-in air filter to minimize dust and debris from entering, as well as a back-pressure function which clears debris out of the tool when the pressurized hose is released. Additional features include the convenient two-step loading procedure to ensure a fast re-load with minimal downtime, sharp spurs on the nose engineered to grip wood, and rubber hand-grips to provide more comfortable handling.

Includes:

Specifications

- Operating Air Pressure: 65 - 120 PSI.

- Nail Size: 2 inch - 3-1/2 inch .113 inch - .162 inch shank diameter plastic or wire collated.

- Magazine Capacity (range) : 64 - 74.

- Dimensions (LxWxH) : 22 inch x 4-1/4 inch x 13-11/16 inch

.

Warranty

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall Makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to Makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of ‘merchantability’ and ‘fitness for a specific purpose’, after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

3-mode selector switch (contact, sequential, lock) allows user control over nailing options

From the Manufacturer

Check out the most powerful nailer in it's class - the Makita AN901 framing coil nailer. The built-in ceramic air filter system prevents debris from entering the tool extending tool life and reducing down time and the 9 quick-dial depth adjustment settings give you precise control of nail depth. You'll enjoy how the easy to load canister holds 1-3/4-inch to 3-1/2-inch coil framing nails and the non-slip nose is the ideal shape for diagonal nailing. We even placed side bumpers on the head unit to prevent damage to the tool from the rigors of everyday use. Designed with a contoured handle with a conforming rubber grip for operator comfort and a three mode selector switch for either -inch bump-inch or -inch sequential-inch operation and an -inch off-inch setting for safe transporting.

• 3-mode selector switch (contact, sequential, lock) allows user control over nailing options
• Built-in air filter minimizes dust and debris from entering the tool
• Sharp, pronounced spurs grip wood for controlled nailing at an angle
• Easy loading canister with nail size adjustment provides maximum versatility
• ""Tool-less"" depth adjustment with 9 depth settings in increments of 1/16""
• Multi-directional exhaust port directs the exhaust air away from the operator
• Rubberized handle for better fit and added comfort

Product description

Check out this lightweight (only 8.4 pounds) yet sturdy framing nailer. The Makita AN942 fires 2 to 3-1/2-inch standard clipped head stick nails, and the easy-load rugged aluminum magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing downtime, and the nine quick-dial depth adjustment settings give you precise control of the nail depth. This model is designed with a contoured handle that has a conforming rubber grip for operator comfort and a three-mode selector switch for either "bump" or "sequential" operation and an "off" setting for safe transporting. The nailer comes with a nose adaptor, oil supply, safety glasses, and operating manual.

From the Manufacturer

Check out this lightweight (only 8.4 lbs.) yet sturdy framing nailer. The Makita AN942 fires 2" to 3-1/2" standard clipped head stick nails and the easy load rugged aluminum magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing down time, and the 9 quick-dial depth adjustment settings give you precise control of nail depth. Designed with a contoured handle with a conforming rubber grip for operator comfort and a three mode selector switch for either "bump" or "sequential" operation and an "off" setting for safe transporting.

• Framing nailer that fires standard 2 to 3-1/2-inch clipped head stick nails
• Easy accessible nail depth adjustment lets you set the nails to 9 different depths
• Lightweight (8.4 lbs.) and perfectly balanced for easy operation; rugged aluminum magazine; built-in ceramic air filter system
• Includes nose adaptor, oil supply, safety glasses, and operating manual
• Tool is 17-1/2 inches long; 1-year warranty

Product description

The Metabo HPT NR1890DRS 18V cordless framing nailer Hitachi power tools is now Metabo HPT. Same tools. New name. The Metabo HPT NR1890DRS 18V cordless plastic strip framing nailer completely raises the bar for cordless framing nailers. Get the power and performance of Metabo HPT (formerly Hitachi power tools) pneumatic nailers with the freedom of cordless technology. This cordless framing nailer is ideal for all construction framing applications along with punch-out work on a jobsite. Get quick in-and-out operation with minimal hassle and professional results. Designed so you no longer need to worry about dirty hoses, loud compressors or expensive Gas cartridges. High stable driving power allows the nailer to drive 3-1/2” nails into even the toughest of engineered lumber with ease Equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. Sealed compressed air drives each nail instant drive performance means there is zero ramp up time to drive nails drive up to 2 nails per second and up to 400 nails per charge using the compact 3.0Ah battery. Recoil feels like a pneumatic nailer. Best of all, no air tank required. Covered by Metabo HPT lifetime Lithium Ion tool & 2-year Lithium Ion battery & 1 Year charger. Dry fire Lock out system prevents nailer from driving when fasteners are low for added safety. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when cordless nailer is not needed. 10. 8 lbs. And well balanced for easy maneuverability.

• Same tools. New name. Hitachi power tools have renamed to Metabo HPT
• Cordless Framing Nailer
• Included: NR1890DRS, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
• Drives plastic strip nails from 2" to 3 1/2" at 2 nails per second and up to 400 nails per charge
• Zero Ramp up time: air spring system increased driving speed and provides recoil like a pneumatic nailer
• Unique air spring drive system: compressed air drives each nail
• Selective actuation: transitions between sequential mode and bump Fire mode

User questions & answers

Question:	This nail gun is for 21 degrease. ? Or for the convencional framing nails
Answer:	21° and 30° are both conventional framing nails. But this is a 21° nailer.
Question:	Just to make sure, the cordless nail only does bring a battery, fast charger, bag, and safety glasses
Answer:	Yes, and an M5 Allen Wrench. The Fast Charger is the UC18YFSL and it will charge the 3.0 Ah battery in 45 min. There is a Rapid Charger (UC18YSL3) that charges the same battery in 30 min.
Question:	Garantia pistola
Answer:	We offer a 60 day warranty. Hitachi offers a one year from date of purchase. All warranty issues after the first 60 days must go directly through Hitachi. Have a great day.
Question:	Will this gun dry fire? I just bought it and charged the battery but it doesnt fire. Does it have to have nails in it to fire
Answer:	No it will not, nor should you try to dry-fire a nail gun. It's generally very bad on the tool. It requires about three or four nails in it to fire, depending on the size of the nail. Which means that once you us it, the gun is NOT EMPTY just because it won't fire the last nail or two; there is every chance that if you drop it or kick it out of the way it will manage to fire one of the remaining nails. Always treat this nail gun and any other nail gun like it's ready to fire.

Product features

Unique Air Spring Drive System

Uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives

Tool-less Depth of Drive Adjustment

For a professional finish with varying materials

Selective Actuation on the Control Panel

Transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime

Pivoting Rafter Hook

For easy storage when nailer is not needed

Product description

The Makita 12V max CXT Lithium-Ion Cordless Pin Nailer, 23 Ga. (model TP03Z, tool only, batteries and charger sold separately), is a hose-free solution for finish and trim work. The TP03Z is compact and powerful, and drives up to 1, 250 pins on a single charge of a 12V CXT 2. 0Ah battery (sold separately). It will drive six different lengths of 23 gauge pins (5/8", 11/16”, ¾”, 1", 1-3/16", 1-3/8") with a magazine capacity of up to 120 pins. Added features include an anti-dry fire mechanism engineered to prevent driving blanks, tool-less depth adjustment for precise flush and countersink finish, and a contact trigger for improved accuracy and precision. With Makita 12V max CXT Lithium-Ion slide-style batteries (sold separately) users get improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L. E. D. charge level indicator. For longer run time, all 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4. 0Ah battery (BL1041B). 12V max CXT lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.

• Refined firing mechanism reduces recoil; reduces force required on the work surface when driving pins
• Drives 6 different lengths of 23 gauge pins (5/8", 11/16", 3/4", 1", 1-3/16" and 1-3/8"); MAGAZINE capacity up to 120 pins
• Anti-dry Fire mechanism engineered to prevent driving blanks and damage to work surface
• "Tool-less" depth adjustment for precise flush and Countersink finish
• Cordless for increased convenience; eliminates the need for a compressor and air hose

User questions & answers

Question:	Can i use grex p6/35l 23 gauge 1-3/8-inch length headless pins (10,000 per box) for makita tp03z 12v max cxt lithium-ion cordless pin nailer
Answer:	Yes
Question:	Can i use bostitch 18 gauge brad nails, 1-3/8-inch, 1000 per box (bt1335b-1m) for makita tp03z 12v max cxt lithium-ion cordless pin nailer
Answer:	I'm too lazy to go get the owner's manual and look up the maximum pressure when I know you could do the same by googling the specs for the nailer. I will tell you that it was designed to be a framing nailer and that is what it does. That is to say, it has sufficient pressure to drive 3.5" framing nails into wood framing members. Makita would not recommend using it for other purposes.
Question:	can you help me to buy pins for makita tp03z 12v max cxt lithium-ion cordless pin nailer
Answer:	You can use nails that meet the following specs: 1-3/4" - 3-1/2" .099" - .148" shank diameter wire collatedFrom the Makita website. I would recommend using better quality nails that might feed better than inexpensive brands.
Question:	How long of nails fit
Answer:	I use mine mostly for 2.5" through 3.5" framing nails. Typically wire collated although I believe I have also used the plastic collated nails too. I actually have a dedicated Bostich siding nailer that has a rubber or plastic protective cover on the end instead of the 'claw' end of the AN902. The teeth, or claws are for getting a good purchase on the wood especially when toe nailing. This has the potential to gouge or mark the siding whereas the protective plastic covering on the siding nailer protects the siding.

Product features

Makita TP03Z 12V max CXT Lithium-Ion Cordless Pin Nailer, 23 Ga., Tool Only

The Makita 12V max CXT Lithium-Ion Cordless Pin Nailer, 23 Ga. (model TP03Z, tool only, batteries and charger sold separately), is a hose-free solution for finish and trim work. The TP03Z is compact and powerful, and drives up to 1,250 pins on a single charge of a 12V CXT 2.0Ah battery (sold separately). It will drive six different lengths of 23 gauge pins (5/8", 11/16”, ¾”, 1", 1-3/16", 1-3/8") with a magazine capacity of up to 120 pins. Added features include an anti-dry fire mechanism engineered to prevent driving blanks, tool-less depth adjustment for precise flush and countersink finish, and a contact trigger for improved accuracy and precision.

With Makita 12V max CXT Lithium-Ion slide-style batteries (sold separately) users get improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

Includes:

12V max CXT Series

For longer run time, all 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4.0Ah battery (BL1041B). 12V max CXT lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The NR90ADS1 Framing Nailer drives paper collated nails from 2" up to 3-1/2" In length and features Metabo HPT next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
• LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
• NEW HEAD GUARD DESIGN: Allows for quicker disassembly during tool maintenance

User questions & answers

Question:	Does this use the Paslode paper collates nails
Answer:	Yes
Question:	can someone link nails they purchased for use with this gun? Looking for 3" to frame basement
Answer:	Hi. I've used Paslode nails, with the framer. Check the nail gun to see if it requires "paper collated", or "plastic-collated" nails, Otherwise they should be ok. Disclaimer: I've only used nails up to 2.5" long.
Question:	The picture shown is for model nr 90ae{s1} look at the model number on the nail magazine
Answer:	Yes that will tell you size angel and degree you need
Question:	does this have an adjustable exhaust system
Answer:	The exhaust port pivots so you can keep it from your face. Even if you catch the exhaust, the paper collating strip doesn’t pepper you like the plastic type.

Product description

The NR83A5 Full Round Head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and Mobile home and modular home construction. The NR83A5 is like the original NR83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A.The NR83A5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.Operating Pressure : 70-120psi

• Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
• Cylinder valve drive system for rapid response and increased durability
• Selective actuation on trigger allows for either sequential or contact nailing
• Rafter hook is included for convenience on the jobsite
• Tool-less depth of drive adjustment for improved control and flexibility when fastening into various types of wood
• Equipped with an industrial 2-piece magazine that can withstand jobsite abuse
• Accepts two strips of nails at a time and locking feeder system makes replenishments quick and easy
• Open nose design for easy extraction of a jammed nail

User questions & answers

Question:	Is this unit easy to use
Answer:	Yes
Question:	this is a pneumatic nailer that is corded. the picture shows a air connection to put air to it. is the information you show as corded incorrect
Answer:	You may have mistaken the air hose for an electrical cord. In 40 years in this line of work, I've never seen both air hose and a power cord connected to any pneumatic tool.
Question:	Can. You shoot clipped head nail in it
Answer:	Hi there. This nailer only accepts full round head nails. Hope this helps!
Question:	Where is it made
Answer:	At Hitachi Factory

Product features

Depth Adjustment

Included for convenience on the jobsite

Selective Actuation

On the trigger allows for either sequential or contact nailing

Ergonomic Non-slip Rubber Grip

On the handle helps maintain a secure hold and comfort during use

Lightweight and Well-balanced

For easy maneuverability

Product description

The Makita 1-3/4" Roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a "tool-less" Depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

• Faster nail driving speed for maximum performance
• Aluminum housing for longer tool life
• Lightweight design at only 5.2 lbs.
• Easy, one-step open, Adjustable canister system for faster, more precise nail loading
• “Tool-less” depth adjustment dial for more precise control in flush nailing shingles

User questions & answers

Question:	Could this be used to nail up fence boards
Answer:	no, You would be better off with a siding nailer the nails are longer and they are ringshank so they hold a lot better.
Question:	The Product Information says that this is corded electric for the power source. Isn’t it pneumatic
Answer:	YES ITS PNEUMATIC. RUNSON. APPROX. 110 PDS.

Product features

Makita AN454 1-3/4" Coil Roofing Nailer

The Makita 1-3/4" Roofing Coil Nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a 'tool-less' depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

Product description

The NR90AES1 framing nailer drives plastic collated nails from 2" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design."



Weighing only 7. 5 lbs, this framing nailer is easy to use all day, while still providing the power similar to other bulkier and heavier framing nailers.



The NR90AES1 framing nailer is great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.



The redesigned head guard of the NR90AES1 framing nailer allows for a faster and easier disassembly process, saving valuable time during tool main10ance.

• NAILER: 21 degree plastic collated framing nailer
• APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
• LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine

User questions & answers

Question:	Aside from the name, is there any difference between this and the hitachi nr90aes
Answer:	Good morning, No difference at all. Same exact tool other than the name. Have a wonderful day :)
Question:	Can u use this gun to use on concrete wall faring strips
Answer:	This gun shoots a plastic collated nail with the angle of the nails at 21 degrees. It shoots up to a 3 1/2” nail. It will shoot nails into wood but not concrete. Hope this helps!
Question:	Can the air inlet fitting be changed to a different size? my compressor (craftsman cmec6150) has 1/4" npt. nailer has 3/8" inlet
Answer:	Absolutely, it will allow more air flow with less pressure.
Question:	Does this nailer take 22 degrees nails
Answer:	The variance on the 20-22 Degree Nailers is 19.5 to 22 Degrees. There is no separate difference between any of these tools that are designed for 20 Degree Plastic Collated FRH Nails. Anybody who makes a statement otherwise does not know what they are talking about, or has bought some bad nails in the past and it got blamed on the 1 Degree difference. First off, unlike Senco, Bostitch and Paslode, who manufacture most of their Nails or govern the quality of the spec, most manufacturers of pneumatics do not manufacture their own nails, they source to the lowest bidder, which means you can get some real junk. You get what you pay for. Most of the North American produced product is of good quality.