11 best bostitch cordless drills

Product description

The BOSTITCH BCB203 20V MAX 2.0Ah Lithium Ion Battery features virtually No self-discharge or battery memory, reducing downtime with this 20V max* Lithium Ion battery. The onboard LED fuel gauge allows you to Quick see the remaining charge. This battery charges in 60 minutes or less using the BOSTITCH 20V max charger Bcb115. Backed by a BOSTITCH 3 year limited warranty. Includes: 20V max* 2Ah battery.

• FAST CHARGING: Charges in 60 minutes or less using BOSTITCH 20V MAX Lithium Ion Battery Charger (BCB115)
• LED GAUGE: LED fuel gauge to quickly see charge remaining
• BATTERY: Virtually no self-discharge or battery memory
• WARRANTY: 3 year limited warranty

User questions & answers

Question:	Will this work on a 18v by Bostitch
Answer:	No it won't.but if you look it up on YouTube you mite be able to file some tabs off to make it work.
Question:	Will this work on a 18V
Answer:	Unfortunately, the pads do not snap on and the plastic round "snaps" sent with the pads do not work. I used two sided tape and attached the pads to the brushes. The two sided tape worked and held the pads securely so I could polish the floor.
Question:	How come i cant find an 18v battery for my bostitch drill. The batteries my combo came with 2 years ago die pretty quick now
Answer:	Username is admin Initial password is admin. If the password doesn't work, do a hard reset on the router and try again!
Question:	Will a 20v battery work on a 18v drill
Answer:	You will have to modify the board sorter in an adapter that handles microwave frequency cables before you can use a extension antenna .

Product description

The Bosch GSR18V 190B22 18V Compact 1/2 In. Drill/Driver Kit features a drill with 480 In. Lbs. of torque, for more power to tackle the toughest tasks around the jobsite. It has a two speed transmission – one optimized for high torque driving and one for high speed drilling. This drill provides 20+1 clutch settings for accurate driving and reduced fastener damage. This compact tool is handy for overhead applications, with a short head length and a weight of only 2.75 Lbs. (tool only, not including battery). The GSR18V 190 has a keyless 1/2 In. chuck a built in LED and an ergonomic soft grip handle. The kit includes two 1.5 Ah Slim Pack batteries, an 18V charger and a carrying bag.

• Performance: The Bosch GSR18V 190B22 drill/driver kit provides an enhanced torque rating, delivering 480 inches lbs of torque for improved productivity
• COMPACT: Featuring a compact, lightweight design, the GSR18V 190B22 weighs only 2.75 lbs (Tool only, not including battery) and has only a 7.8 inches head length
• ACCURACY: With 20+1 clutch settings, the drill/driver provides accuracy for reduced fastener damage; The keyless ratcheting 1/2 inches chuck with auto lock enables easier bit changes
• VERSATILITY: The GSR18V 190B22 provides 2 speed settings, allowing for high speed (0 1, 700 RPM) setting and high power (0 450 RPM) mode
• CONVENIENT: The GSR18V 190B22 includes a built in LED light, an ergonomically designed soft grip handle, 2 1.5 Ah SlimPack batteries, an 18V charger and a carrying bag

User questions & answers

Question:	Is there a bit holder
Answer:	Actually im not sure we are understanding the question properly. If im not mistaken, the OP means to ask if he could charge these batteries he buys in the US, on a charger from a country with 220v (which he might have bought else where). If that is correct, then yes, you can still charge the battery on that charger as long as the charger output is the same as the US (110v) charger.
Question:	is it ok to leave the spare battery in the charger after it is fully charged
Answer:	Mine has a “light ratcheting” as I turn the chuck. As long as it secures the drill and/or driver bit you should be good.
Question:	Where is this actually made
Answer:	Thank you for your question. The CLPK22-120 includes (2) 2.0ah batteries. The older version was supplied with the 1.5ah batteries. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Is the charger suitable for 240 volts
Answer:	Thank you for your question. Yes, this PS31 is the same drill as the PS31-2A. If you have further questions please feel free to contact our Bosch Product Specialists at 1-877-BOSCH-99 (1-877-267-2499).

Product features

Drilling and Driving Control

The 20+1 clutch settings and a variable-speed trigger on the tool help to give the user the versatility to match the speed to the task at hand. The drill is compact for more control in tight corners.

The Bosch DDB181-02 Includes:

DDB181 1/2-Inch Compact Drill/Driver,

Screwdriving Bit, 1.5Ah Slimpack Batteries,

Charger, Contractor Bag

Optimized Performance for Everyday Applications

The Drill/Driver is ideal for everyday drilling and driving applications. It offers a two-speed transmission, one optimized for heavy-duty driving and the other for high-speed drilling.

Lightweight Drill Ideal for Overhead Tasks

The DDB181-02 provides performance in a lightweight and easy-to-use tool. Since it weighs just 3.0 Lbs. (tool only, not including battery), it is a great choice for overhead drilling and driving.

100% Compatibility with Bosch 18-Volt Batteries

The DDB181-02 kit includes two 2.0 Ah SlimPack batteries and a charger. The drill is compatible with all Bosch 18V batteries, including optional high-power CORE18V next-gen batteries.

Product description

DEKO 20V Cordless Drill Driver

DEKO 20V Cordless Drill Driver with max torque 42N.m combines a dual speed range and 18+1 position clutch in a compact size which delivers precise control for drilling into wood, metal, plastic, and all screwdriving tasks.

DEKO 20V Cordless Drill Driver is a great foundation for any professional contractor or DIY player's power-tool collection.



Specification:

Rated Voltage:20V

Power Source: DC

Charging Time:1 Hours

Battery Type: Lithium Ion

Frequency: 50-60Hz

Rated Input Power: 400W

Chuck Size: 3/8" (0.8-10mm)

No Load Speed: 0-350/0-1350rpm

Torque Settings:18+1 Settings

Rated Torque: 42N.m

Charger Adapter Input: 100-240V AC 50-60Hz

Usage: Metal and Wood Drilling, Screw Driving

• 2-Variable Speeds：DEKO Cordless Drill Driver provides 2 speed transmission(0-350 rpm and 0-1350 rpm), one for heavy duty projects and one for speed, both provide optimized torque and efficiency for powerful fastening and precise drilling.
• 18+1 Torque Setting：18+1 is the torque gear. 18 Torque allows for various tasks and additional 1 torque for drilling. Variable speed with forward and reverse direction keeps you in control. Torque can be adjusted according to various work needs.
• Better Power & Quick Charge: DEKO Cordless Drill Driver with 1.5Ah Lithium-ion batteries, quick charge for 1 hour. Built-in LED work light, which helps the operator to illuminate the work area and working in the dark.It also has 3 lights to warn you of the state of battery.
• Ergonomic Design：Rubber-covered handle with ergonomic design offers maximum user comfort and less vibration, Which gives a more secure grip for enhanced user control, lightweight reduces user fatigue, and empower operators work at confined space.
• Wide Use: Get your DEKO power tools. The Cordless drill can help you complete various applications accurately precisely. Mainly ideal for a range of drilling holes and driving screws on wood, metal and plastic.

User questions & answers

Question:	Does this drill fit other manufacturers 20v batteries, such as the yellow/black name brand starting with De and ending with Walt
Answer:	Mine came with a cord to charge it . At first I thought the same thing....Where is the charger.... but after a few minutes of looking it over i figured out that you plug the charger cord into the battery itself. In the front of the battery ,Where it would plug into the drill there is a little hole ,and this is where you charge it . They should have given better instructions, but this should fix your problem
Question:	Hola es percutor
Answer:	Yes you can use a 20v in a 18v, there is no difference between a 18v battery or tool and a 20v battery or tool. The battery packs are made up of 3.6v cells which can be rated at nominal voltage (18v) or peak voltage (20v) It's all marketing don't be fooled, they are the same.
Question:	How tall is this drill? I need a drill less than 8” long food tight space
Answer:	No, the BCB203 is for use with an 20V tool only.
Question:	This drill has batery but no charger,, it means when the battery is done, the drill is good for garbage? life battery no idea?this is piece of junk
Answer:	They have them at home depot.

Product features

Switch Safety Lock

The forward/reverse button allows screws to be removed or replaced once they are secured so that your work will be more reliable and safe.

2-Variable speed gear shify

The drill kit is designed with variablel 2-speed setting (0-350RPM,0-1350RPM)to provide accurate control for both low and high torque applications.

Powerful Battery

The portable power bank effectively solves the problem of outdoor power consumption. It can be fully charged in only one hour and can be used for a long time.

18-position torque selector

18 position adjustment torque and 1 function transformation on the tool help to give the user the versility to match the power requirements of different scenarios.

Stepless speed regulation

Variable speed pressure button makes gear speed adjustment easier and faster, which Effectively improve the work efficiency.

Auto Chuck

Auto chuck helps to provide more precision of torque adjustment as needed, no worry of screws loosens while at work.

Product description

The Stanley Bostitch 651S5 is a sheathing stapler designed with easy to use features for the contractor.  Key features include a flip open nose design for easy jam clearing, adjustable depth of drive, vinyl siding adapter for proper siding installation, adjustable rafter hook, a contoured grip for comfort, and a selectable trigger for tool free switching between contact and sequential operation.  It is lightweight at only 4.2-Pound and powerful with a rapid fire engine that drives 10+ nails per second.  with the 2-Inch capacity it is perfect for applications such as plywood sheathing, roof decking, wood shingles, and vinyl siding. .

• Rapid fire engine produces 10 or more staples per second
• Lightweight at just 4.2 Pound
• Tool free jam clearance reduces downtime

User questions & answers

Question:	where can i get 2" stainless staples for 561s
Answer:	No this stapler isn't designed for that. The staples are to wide. I'm sure the air stapler you saw being used was a 1/4 inch crown stapler!
Question:	will this shoot 3/4in long staples
Answer:	I can’t say specifically for tyvek, but the hammer action isn’t too rough. I’ve used it on Kraft backed insulation to wall studs without many issues. I think the material under the wrap is what makes the most difference. I have used this on roofing felt, carpet padding, and insulation. I have owned it for about 8 years now and still works great.
Question:	Will it load and shoot Senco Q series staples (7/16" 15 gauge
Answer:	It is extremely easy to reload, simply pull out the sliding shaft, place the row of new staples in the slot and slide the unit back together. This was a particularly user friendly feature when walking through the woods posting No Trespassing/No Hunting signs.
Question:	Can I staple hardware cloth (welded wire fencing) with this tool
Answer:	Stamped into the metal chassis are the staple sizes actually accepted by this product, and it only accepts up to 1/2 inch staples. This hammer stapler by Arrow DOES NOT handle 9/16 staples... I tried and they won't fit.

Product description

Best suited for metal drilling with corded or cordless drill/driver. Split point tip reduces walking. Flats on shank prevents bit slipping in the chuck. . .

• Product Type :Tools
• Package Dimensions :13.97 Cm L X1.524 Cm W X1.016 Cm H
• Country Of Origin :China
• Package Quantity :1

Product description

Best suited for metal drilling with corded or cordless drill/driver. Split point tip reduces walking. Flats on shank prevents bit slipping in the chuck. . .

• Product Type :Tools
• Package Dimensions :14.478 Cm L X3.81 Cm W X0.762 Cm H
• Country Of Origin :China
• Package Quantity :1

User questions & answers

Question:	Can I use this for nails
Answer:	With the battery in it's 8 inches

Product description

Best suited for metal drilling with corded or cordless drill/driver. Split point tip reduces walking. Flats on shank prevents bit slipping in the chuck. . .

• Product Type :Tools
• Package Dimensions :13.97 Cm L X5.08 Cm W X0.762 Cm H
• Country Of Origin :China
• Package Quantity :1

Product description

Drives both Brads and narrow crown finish staples for ultimate versatility. Applications include Interior and exterior finish and trim, furniture, cabinet work, staircases, paneling, crafts. Adjustable depth guide sets nails to desired depths quickly and conveniently. Tool-free adjustable exhaust conveniently directs exhaust away from the user. 135 in/lb. (Inches per pound) driving power. 70-100 PSI (pounds per square inch). 2.6 lb. (Pound). Drives both Brads and narrow crown finish staples for ultimate versatility.

No need to buy a brad nailer and a crown stapler separately, this super-versatile nailer/stapler tool packs two tools into one handy unit. Perfect for crafts, paneling, nailing finish and trim, cabinetry and more, this tool let’s you swap nails for staplers rather than disconnecting and connecting a new tool to the compressor. In nailer mode, the unit drives brads up to a 1-5/8 inches in length for anything from stair construction to cabinet work. The stapler mode fires 18-gauge, 1-1/2-inch finish staples for easy furniture upholstering and craftwork. An adjustable depth guide sets staples and brads to desired depths quickly and conveniently. And, tool-free adjustable exhaust easily directs exhaust away from the user. --Brian D. Olson

From the Manufacturer

The ultimate Tool for the craftsman and home hobby shop. It's actually two tools packed into one design. Even better, the SB-2IN1 tool requires no adjustment to switch from brads to staples and vise-versa. When used as a brad nailer, the SB-2IN1 drives 18-gauge brads between 5/8 and 1-5/8-inches long. As a narrow crown stapler, the tool drives 7/32-inch crown staples between 1/2 and 1-1/2-inches long. Its adjustable depth guide sets fasteners to desired depths quickly and conveniently while a tool-free adjustable exhaust directs exhaust away from the user.

• 5/8 to 1 5/8 18 gauge Brad nailer and ½ to 1 1/2 inch 18 crown Staple Combo tool
• Adjustable depth dial; tool free directional exhaust; 135 inch pounds driving power
• Nail lock out feature eliminates dry firing; MAGAZINE holds 100 nails

User questions & answers

Question:	Do I need an air compressor
Answer:	Like whiskey stones that sold from others, they are made in China.
Question:	Comes with
Answer:	Our products are designed in the USA and manufactured in China, just like any other utensil or even the smartphone in your pocket!
Question:	Does it come with a case
Answer:	Hey there! Our products are designed in the USA and manufactured in China. Just like any other stainless steel kitchen utensil or even the smartphone in your pocket. We keep strict quality control and offer a 3-year warranty in case of any issues with your bartender kit.
Question:	will it drive staple through sheet metal
Answer:	Hey there! These stone bullets are just over 2 inches long (2.16 in)

Product features

BOSTITCH Brad Nailer 18 Gauge/Narrow Crown Stapler, 2-in-1 (SB-2IN1)

This 18 ga 2-in-1 brad nailer/finish stapler kit is versatile and convenient with its ability to drive both brads and narrow crown finish staples to your desired depth. Use this kit for interior and exterior finish and trim, furniture, cabinet work, and more.

• Drives both 18-gauge brads and narrow crown finish staples for ultimate versatility
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Tool-free adjustable exhaust conveniently directs exhaust away from the user
• Kit includes: Nailer, 1/4" Air Fitting, Carrying Case, Extra No-Mar Tip and Oil

Product description

BOSTITCH BT1350B-1M 2-Inch 18-Gauge Brads, 1000 per Box

From the Manufacturer

Bostitch 18 Gauge Brad Nail

• This product is easy to use.
• This product is highly durable
• This product is manufactured in China.
• This product is easy to use.
• This product is manufactured in China.
• 2-Inch Length
• Chisel Point

User questions & answers

Question:	Will this work in a Hitachi 5/8”-2” Brad nailer
Answer:	50.8 mm so for all purpose 51mm. Why would this make a difference.
Question:	Are these 50 or 51 mm
Answer:	For interior use only. These are not hot-dipped galvanized; at best, they are "zinc-coated" or "electro-galvanized." The only collated brad-nails suitable for exterior use are the ones made of stainless steel.
Question:	Are these "coated" as in hot dip galvanized? Are they rated for exterior use or with treated lumber
Answer:	yes, they worked well in my craftsman gun, I had no problems.(If yours will take 2'' nails)
Question:	can I use these brads in a Craftsman nail gun
Answer:	I don't think so. I had my.own. it's a common sq drive

Product features

BOSTITCH 18 Gauge Brad Nails, 2-Inch, Coated, 1000 per Box (BT1350B-1M)

Description:

These 18 Gauge Brad Nails Have A Coated Finish With A Chisel Point. For Interior Use. Use With Bostitch Tools Btfp12233, Sb-1842bn, Sb- 2in1, Sb-1850bn, Bt35b, Bt200k-2, Bt125k-2, Gbt1850k. Fits Most 18 Gauge Brad Nailers.

Product description

Bostitch 1.25-Inch 18-Gauge SS,500ct

• Size: 1.25-Inch brad nail
• Chisel Point & Coated finish
• 18-Guage; Contains 500 count in-Package
• For interior use. Use with BOSTITCH tools BTFP12233, SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, GBT1850K. Fits most 18 Gauge Brad Nailers.

User questions & answers

Question:	Do these have ring shanks? If so, do the rings go all the way down the shank
Answer:	Since 304 is austenitic, so these are essentially non-magnetic, but a strong Nd magnet will still have some attraction. They have LOWER strength and shear resistance than almost any other steel, which is an unavoidable trade-off for using 300 series stainless. There are high-strength stainless steels like 17-4 PH, or Nitronic 50, but no one in their right mind would use those for nails due to their extreme cost. Withdrawal resistance? Probably the same, depends more on the shape of the brad than anything else.
Question:	Are these recommended for exterior use
Answer:	usually all 18 ga nails will work with any 18 ga nailer.
Question:	do they respond to a magnet and do they have greater strength, shear resistance and withdrawal resistance than galvanised brads if used to fix 8mm cfc
Answer:	As for as the look and feels and size I would say better. As far as durability and longevity I can't say yet.
Question:	Will these ss brad nails work with the Ryobi Airstrike Brad nailer
Answer:	Yes

Product description

BOSTITCH BT1335B-1M 1-3/8-Inch 18-Gauge Brads, 1000 per Box

From the Manufacturer

Bostitch 18-Gauge Brad Nail.

• This product is easy to use
• This product is highly durable
• Manufactured in China
• Package Height: 0.4"

Product features

BOSTITCH 18 Gauge Brad Nails, 1-3/8-Inch, 1000 per Box (BT1335B-1M)

These 18 gauge brad nails have a coated finish with a chisel point. For interior use. Use with bostitch tools btfp12233, sb-1842bn, sb- 2in1, sb-1850bn, bt35b, bt50b, bt200k-2, gbt1850k. Fits most 18 gauge brad nailers.