10 best bostitch coil nailers

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

Lightweight magnesium design for added durability. Patented push-button adjustable depth guide sets nail to desired depths quickly and conveniently. Coil magazine hold up to 300 nails for high production applications. Aggressive wear guards protect the tool from damage on abrasive surfaces. Adjustable exhaust directs air away from the user. Applications include framing, Sheathing, Siding, fencing, Trusses, decks, bridging, pallets/crating, and wood to masonry. Accepts 2" To 3-1/2" 15 deg Coil framing nails. 1050 in/lb. (Inches per pound) driving power. 70 to 120 PSI (pounds per square inch) operating pressure. Lightweight magnesium design for added durability. This product is manufactured in Taiwan. This product meets customer requirement.

The Bostitch pneumatic coil framing nailer is designed to be impressively rugged and powerful. Its sturdy nature is disguised by a lightweight magnesium housing that's easy to hold and capable of surviving some serious abuse on the job site. This hardy model even has aggressive wear guards that help protect it from damage when you use it on abrasive surfaces.

The N89C-1 has a patented push-button adjustable depth guide to set nails at precisely the desired depths, quickly and conveniently, with minimal downtime between jobs. It also features an adjustable exhaust to direct cast-off air away from your face and your workpiece, for a clearer view of your project.

This model has a driving power of 1,050 in./lbs., and it accepts 15-degree coil framing fasteners from 2 inches to 3-1/2 inches (.099 - .148-inch shank). It operates at 70-120 psi, with a 1/4-inch NPT thread fitting. The N89C-1 has a magazine that holds up to 300 nails. -- Cherie Priest

Applications

Use the N89C-1 for almost any fastening application on the job site or home improvement project. It's perfect for framing, sheathing, siding, fencing, trusses, decks, bridging, pallets and crating, wood, or masonry.

What's in the box

Stanley Bostitch pneumatic coil framing nailer.

Choosing a Pneumatic Nailer

For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins.

A Word on Air Compressors

All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set.

How Pneumatic Nailers Work

Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded.

Important Points to Consider

Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly.

General Features

Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day.

• Pneumatic coil framing nailer with an adjustable exhaust
• Patented push button adjustable depth guide sets nails to desired depths quickly and easily
• Lightweight magnesium design; aggressive wear guards to protect the tool from damage on abrasive surfaces
• Magazine holds up to 300 nails
• 12 1/4 inches long, 14 inches high; weighs 8.1 pounds; 7 year limited warranty

User questions & answers

Question:	what is the difference between his one and the $519 one. they have the same n89c-1 number
Answer:	MADE IN CHINA I just bought these because I thought they were not made in China. They are made in China not Germany.
Question:	I am building a fence and Need to drive galvanized 13 gauge 2-2.5 inch nails into cedar pickets, will nailer work? Thank you
Answer:	No they are not adjustable. These were bought for my wife and they just fit her and I would say she has an average head.
Question:	Does anyone know if I can use this gun for lap siding? Blind nailing
Answer:	The tactical sports cost me $150 when I got and after 2 years stopped working. Peltor wanted over $100 to fix them. These cost less and still work after 2 years.
Question:	what compressor to buy for this tool? please advice (for framing
Answer:	I just did my first range shooting today. I was able to borrow a pair of these cups. I wear glasses. I had absolutely NO problems with the seal letting in extraneous noise. Even with 30dB of reduction, the noise is still quite loud, but not enough that your ears will be damaged, or even be ringing, when your shooting day ends. I just put in my order for a pair of them. Highly recommended!

Product description

The product is Coil Frame Nailer. Easy to use. The product is manufactured in Taiwan.

A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch's utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn't the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls--the inevitable beating nailers take on a job site. The nailer's aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels--it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. --Jonathon Tudor

• The product is Coil Frame Nailer
• Easy to use
• The product is manufactured in Taiwan
• Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
• Contact-trip trigger; large-capacity magazine
• Aluminum housing
• Accomodates nails from 1-1/2 to 3-1/4 inches
• Weighs just 8 pounds; 7-year warranty; made in the Taiwan

User questions & answers

Question:	can someone explain why the canister adjusts up to 4" nails but, it can only handle up to 3 1/4" nails
Answer:	With a noise reduction rating of 21, as compared to the 22 of the popular Peltor TAC 100 model, the RangeGuard offers solid, consistent hearing protection. If you're shooting indoors, using an extremely high caliber weapon, or are surrounded by a significant amount of gunfire, your hearing may be compromised. Outdoor protection is excellent, and under most circumstances you are assured of being fully protected. After over 100 hours of use with the RangeGuard (both indoors and outdoors with a wide variety of firearms), I never experienced any kind of noteworthy shortcomings in the noise reduction of the model. As stated, under some circumstances you may feel the audio coming in a bit louder than you'd like, but the average gun owner will never need a stronger model.
Question:	Can I use it for solid hardwood flooring
Answer:	Yes, very easily. They even amplify sounds and make them easier to hear (but not loud noises like gunshots). They have a microphone on each earpiece so you can easily distinguish where sounds are coming from.
Question:	Is this a good framing nailer
Answer:	They'll only "work" if you turn them off. As someone who actually owns these headphones, no - they will not work for lawn mowers. Unless, of course, you turn them off, in which case you're paying a premium for muffs with a microphone and speakers in them. The headphones pick up all outside noise using two forward-facing microphones so that you can "hear" while you're wearing them. The cutoff circuit only engages when it picks up a sudden, sharp noise - like a gunshot, an air nailer, or a hammer blow. Continuous loud noises such as heavy equipment, power tools, saws, airplanes, etc... do not trigger the cutoff and in many instances can *amplify* the noise.
Question:	Will this fit 1 1/2" or 1 3/4" roofing nails
Answer:	These are teal the others are camo green. That's about it.

Product description

BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.



Bostitch BTFP72333 Industrial 1/4-Inch Series Swivel Plug with 1/4-Inch NPT Male Thread

The Bo stitch BTFP72333 Industrial 1/4" Series Swivel Plug - 1/4" NPT Male Thread features a swivel design which minimizes hose twisting for improved control. It is designed with corrosion resistant steel for long. It also offers pre-applied thread sealant for airtight connections which this eliminates the need for thread sealant tape.

• 1 of BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)
• 1 of Bostitch BTFP72333 Industrial 1/4-Inch Series Swivel Plug with 1/4-Inch NPT Male Thread

User questions & answers

Question:	Where is manufactured
Answer:	Excellent question! This saw offers tool-less blade change. To remove blade, lift tool-less blade change holder up with index finger and thumb and remove blade.

Product description

Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2").

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Works with a Variety of Siding Materials, from Soft Wood to Steel

Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use

Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Siding nailer

• Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for added durability. Fastener Diameter .080 .092 Inch
• Soft rubber foot prevents damage to softer woods
• Tool free adjustable exhaust conveniently directs exhaust away from the user
• Ensure using compatible nails to prevent misfires/ensure proper operation.
• NOTE : No carry case is included.

User questions & answers

Question:	Can this gun be used to install azek trim boards
Answer:	No, with standard framing contact arm installed: Uses a 30° paper collated stick nails, in lengths of 2” to 3-1/2” (50-90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm). With metal connector attachment installed: Uses a 30° - 35° paper collated full round head metal connector nails, in lengths of 1-1/2” and 2-1/2” (38 - 64mm) and shank diameters of .131”, .148” and .162”.
Question:	Would this nailer be good for nailing fascia, soffit and exterior trim
Answer:	The only difference I see is about 270$ in price.😊All joking aside, this nailer is a beast. If you go with it I don’t think you will be disappointed.
Question:	can you use this gun on hardie board
Answer:	Yes, this gun will shoot up to a 3 1/4" nails. You will be very pleased with what this gun will handle. Hope it was helpful?
Question:	Will this work on James Hardie trim boards
Answer:	Adjustable depths.."" air..""length of nails.. go for it. If you break through the face back it off a bit and go. Nothing worse than a gun with too little punch. I'd use a smaller head for the trim though..6 penny

Product features

BOSTITCH N66C-1

Features:

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Adjustable exhaust conveniently directs exhaust away

Product description

The BOSTITCH BRN175A bulldog 15 degree Coil roofing nailer combines performance and adjustability to handle roofing applications. This light weight 4.8Lb roofing nailer drives 3/4" to 1-3/4" Coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. There is a wheel to adjust the drive depth so that nails can be properly installed into a variety of materials. The exhaust cap can swivel so that the exhaust is always pointing away from the user, and the shingle guide under the magazine can be adjusted for proper shingle spacing.

• Upgraded engine and feed system improves drive quality, overall performance, and durability
• Dual door MAGAZINE can be closed multiple ways
• Oversized tool free depth adjustment for proper nail setting
• Carbide nose inserts help to protect the nose from wear
• Redesigned grip handle for better feel

User questions & answers

Question:	Does this nailer require a compressor
Answer:	Yes, this is pneumatic powered.
Question:	Where is made
Answer:	The country of origin of the BRN175A is Taiwan.
Question:	Does this also shoot siding coil nails
Answer:	It absolutely will NOT. I thought maybe it would from reading other reviews. It will just jam up every time

Product description

The N75C-1 - Coil Sheathing/Siding Nailer is perfect for high-volume nailing of wall and roof sheathing. It drives 15-Degree wire weld collated and plastic inserted nails with shank diameters of 0.090-Inch to 0.131-Inch. It has a lightweight aluminum design for added durability. An adjustable depth guide sets nails to desired depths quickly and conveniently. Weight 4.9-pounds, 2.22 kilos. Driving Power 630 Inch/pounds. Fastener Range 1 1/2-Inch to 3-Inch Wire Weld and Plastic inserted coil nails (.090-Inch to .131-Inch Shank) magazine capacity 225-300 nails operating pressure 70-120 PSI thread fitting Type 1/4-Inch NPT.

• Perfect for high volume nailing of wall and roof sheathing
• Drives 15 degree wire weld collated and plastic inserted nails with shank diameters of 0.090 Inch to 0.131 Inch
• Lightweight aluminum design for added durability
• Adjustable depth guide sets nails to desired depths quickly and conveniently

User questions & answers

Question:	Will the n75c-1 accept maze nails clcem119 3” plastic collated nails
Answer:	Yes, but the trigger was missing a pin. Stole it from my old one to make it work!
Question:	After shooting 1 or 2 nails I have to move next nail in position to shoot. Using wire coil
Answer:	The one I ordered from Amazon did.
Question:	Does it come with both a sequential and contact trigger
Answer:	not sure about the CFM but pressure should be around 90-100 PSI
Question:	DOES IT COME WITH A CASE
Answer:	Operating Pressure: 70 - 120 psi

• 1 of BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)
• 1 of BOSTITCH VSA4 Vinyl Siding Adaptor Kit

Product description

Brand New

Bostitch BTF83C

15 Degree Coil Nailer

Uses 15 Degree Wire Weld Coil Nails up to 3 1/4" in Length and up to .148" in Diameter

7 Year MFG Limited Warranty

 

 

Low Profile Design to fit between studs under 13' tall; lightweight and ergnomic

Power to drive into Engineered Lumber

Industrial Grade Engine Design for increased life

Tool Free Depth Adjustability

Rafter Hook

Robust Canister Design to survive deep drops

Industrial grade design for high volume framing and sheathing applications, Low profile design with enhanced ergonomics and balance for comfort and control, Powerful enough to drive into engineered lumber, Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook

If you have any questions or doubts about what your tool requires, please contact us.

We are Happy to Help our Customers!

Free Shipping for Continental US Only!

33b btf83c

• Color: Yellow
• Length: 14.1"
• Height: 12-1/2"
• Width: 5"
• Energy Type: Pneumatic

Product description

2750-5486 Features: -Coil roofing nails.-Use in Roofing Nail Guns RN45B (2750-5338), N12-B, and N12-1.-Smooth Shank.-Galvanized.-Full round head.-Diamond point.-1''.-7,200 per box. Specifications: -15 wire collated.

From the Manufacturer

Bostitch 15 Degree Coil Roofing Nail

• Measures 1" in Length
• Smooth Shank
• Galvanized Finish
• Contains 7200 Nails Per Box
• For Use in the Bostitch RN46-1 Industrial Roofing Nailer

User questions & answers

Question:	Are these hot dip galvanized or just electro galvanized
Answer:	Yes this item meets both ASTM A153-D and F1667. For submittal data please send us a request through email or by calling 877-593-2723. Thank you.