13 best drywall anchors for mounting tv

Product description

Mounting a TV into steel studs? You've come to the right place. Most TV mounts don't come with the necessary hardware for a steel-stud install. This kit gives you everything you need, including:

• 4 Snaptoggle anchors
• Steel stud drill bit
• Screws & washers of various sizes to ensure compatibility

We made sure to include high-quality hardware so you can trust that your TV will stay mounted to steel studs. Just remember, only mount low-profile or tilting mounts to steel studs. Full-motion TV mounts are not recommended for steel studs, the twisting motion can warp the studs which is bad news for your structural integrity.

NOTE: Toggler Steel Stud Anchors are not compatible with Dry Wall-only TV Wall Mount applications

• This kit's basically the "easy button" for mounting a TV to steel studs - it includes everything you'll need to make it happen.
• You like us? We like Toggler. Included in this kit: 4 of their UL rated Snaptoggle anchors (1/4 x 20 x 1.75)
• No drill bit, no problem! It comes with this kit. You'll just need a drill with a ½” chuck to complete installation.
• Includes 4 screws and washers to easily attach your TV mount to the Snaptoggles
• Practice safe mounting: Facilitates secure installation to steel stud walls, common in apartments and commercial construction.

User questions & answers

Question:	Can it hold a 65 inch tv
Answer:	Probably. If installed correctly it should, I have a newer (2018) 55" and it holds it just fine. If you have an older (heavier) 65" it may be...interesting.
Question:	Can I use these as drywall anchors
Answer:	Hello, The snaptoggle anchors in this kit are for steel studs only, they are not meant to be used on drywall-only applications. Kathryn @ECHOGEAR
Question:	Can this hold a 75 inch TV, weight about 80lbs + a fixed bracket
Answer:	Its more about the weight and making sure the toggles are centered on the steel studs. I do believe that the specs indicate that it will hold that weight.
Question:	What can you do if the strap toggle isn’t going through the steel stud
Answer:	You need to hog out the hole with the drill. You must have a burr holding it up.

• METAL/STEEL STUD WALL MOUNTING KIT. Complete mounting kit to facilitate secure & easy installation of TVs/etc through metal/steel studs or just 1/2" drywall. Metal studs are common in home basements, above fireplaces, extensions, condominiums, home additions, apartments and commercial construction.
• STUD NOT REQUIRED. Ultimate tensile pull out strength 200 lbs on 1/2" drywall. STRONGEST DRYWALL ANCHOR AVAILABLE 4 Pieces of TOGGLE BOLTS provided can be used on Gypsum board, Drywall, Tile over drywall, Plasterboard, Composite panels, Cement board, Greenboard, Plaster, Stucco. Easy to use anchors compared to all other anchors available in the market.
• COMPLETE KIT – One 1/2" hex shank titanium drill bit, 4pcs of ¼ -20 hollow wall toggle anchors, 4pcs of ¼-20 x 2’’ STAINLESS STEEL screws, 4pcs of ¼’’ washer, Electrical tape to mark positions of items you are mounting. Safe multiple trips to the hardware store. The provided 1/2" drill bit is high quality M2 HSS with a pilot head can be used with any drills including impact driver because it has a hex shank. Perfect Screw length of 2" is provided catering for most wall types.
• OTHER MOUNTING USE – Mounting of Shelves,Cabinet mounting, Bathroom Accessories, Grab Bar, Vanity, Draperies, Curtain Rods, Blinds and Mirrors on - : Drywall, plaster over lath, gypsum, panels, cement board, MDF.
• NEATLY LABELED PACKAGING & MANUAL– The components in this package is separated by different use, the instruction manual is also included

User questions & answers

Question:	It says 200lbs drywall anchor mounting but on the instruction inside it says tv must not weigh more than 80lbs. So whats the weight it can hold
Answer:	Ultimate tensile strength is 200 lb. in 1/2" drywall. Use one-fourth or less of listed maximum values for safe working loads.

Product features

Strong & Easy-To-Use Anchors

Make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts can hold up to 200 lbs on 1/2" drywall.

✔They make smaller holes and are 5x faster to install the wing bolts or wing toggles

✔Pre-installs without the bolt to make handling of fixture easier

✔Reusable in the same hole – remove the bolt without losing the anchor

✔New ergonomic design – fingers grip straps more naturally and more easily with no slipping

✔Strong—up to 2x the load of an old-fashioned wing toggle

✔Save time—at least 6 minutes per anchor versus wing toggles

✔Easy Set Up—turn a 2-person job into a 1-person job

Product description

Application: The lag bolt kit fit for concrete wall, wood studs and brick wall

Material: High quality plastic anchor, Zinc plated lag screws and alloy steel drill bits

Note: Concrete anchors are not compatible with wood and drywall

Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits

• Application: The lag bolt kit fit for concrete wall, wood studs and brick wall
• Material: High quality plastic anchor, Zinc plated lag screws and alloy steel drill bits
• Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits
• Note: Concrete anchors are not compatible with wood and drywall
• Warranty: 2 years

Product description

Mount anything!

The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8 to 3-5/8 thick including gypsum board, drywall, and concrete block, includes 1/4-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.



The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2 drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

• Toggle anchor installs behind 3/8- to 2-1/2-thick hollow materials including gypsum board,
• Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and
• Made in USA, and includes 1/4-20 UNC-threaded bolts
• Ultimate tensile strength is 265 lb. in 1/2 drywall and 1,080 lb. in concrete block with a 1/4-20
• Use one-fourth or less of listed maximum values for safe working loads

User questions & answers

Question:	Anyone know the size (width of the screw head)? Trying to mount a TV and want to make they can cover the gap (and wont just fall through the hole
Answer:	NO!!! Please DO NOT DO THAT! NO full motion TV should be attached to a drywall with anchors only. The drywall might fail, not likely the anchors. You MUST install a full motion wall mount to wood studs or concrete. Contact AV-Express for further assistance 877-302-8397 [email protected]
Question:	will these work to mount a 65" tv using a full motion mount
Answer:	Dude you should really not be doing any housework. The weight is accelerated because of the LEVERAGE since the weight is far from the wall. Here's what's going to happen--someone will lead onto the vanity and rip the entire drywall down. Stop doing any repairs to your house. Find where the studs are (they are typically spaced 16 inches apart), then use 3 inch wood screws to attach it. Attaching a vanity which by itself weighs 165lbs and leaning on it WILL 100 PERCENT DESTROY YOUR WALL. Free advice. You're welcome.
Question:	Will these work to secure a floating vanity and sink (total weight of both 165 lbs) to drywall? I will be using 6 of these
Answer:	If you are putting up wood and using this to anchor it, you want to predrill the hole in the wood at 1/4" then in the sheetrock 1/2" is too small I had to go up one size larger to snugly slide the anchor through. Otherwise FANTASTIC anchor! (Careful when using around insulation)
Question:	what size bit do I pre-drill the hole with
Answer:	I would not recommend that. I don't believe that would be strong enough to deal with someone's weight pulling on it. Drywall won't support it.

Product description

The FlipToggle is the only single-strap design that takes the guesswork out of hollow-wall anchoring. Its unique design securely holds the toggle for easy insertion into the pre-drilled hole. Once inserted, the spring tab flips the toggle into the right position so that when the collar is tightened the anchor is ready for the bolt. No jammed toggles, broken straps or misaligned bolts. Key Features: Installs into drywall and hollow CMU up to 2 1/8" thick with a 2 1/2" bolt. Bolt size: 3/16"-24 thread. Simple one-strap design holds toggle perfectly aligned for easy bolt insertion The collar ensures centered bolt placement in the hole and does not embed the bolt into the drywall, eliminating the potential for sagging fixtures. Installation: FlipToggle installs in four easy steps: Fold, insert, flip and tighten -- it's that quick!

The Anchor requires a 1/2" hole and a 10-24 screw (included 2-1/2" long)

Specifications

 

SAFE WORKING LOADS 2:1**

Ultimate Tensile and Shear Strength Values

• 1/2" Drywall - Ultimate Tension 67 lb (38 kg), Ultimate Strength 106 lb (57 kg)
• 5/8" Drywall - Ultimate Tension 107 lb (52 kg), Ultimate Strength 188 lb (74 kg)
• Hollow Concrete Block - Ultimate Tension 415 lb (203 kg), Ultimate Strength 435 lb (204 kg)

** Loads may vary according to the quality of the drywall or concrete hollow block.

Warning: Use one-half or less of listed maximum values for safe working loads (as required by local regulations).

• What's in the Box?
• (10) Flip toggle anchors
• (10) 3/16"-24 UNC bolts

Environmental conditions: Indoor, dry conditions

Material composition: Polypropylene, Steel, zinc-plated, Plastic

• New one strap design for easier insertion and flipping operation
• Ideal for all type of hollow wall, up to 3" (75mm) thick
• Requires an one half inch hole
• Fast and easy installation
• Eliminates the potential for sagging fixtures

User questions & answers

Question:	Can a different sized screw work? Have shelves I want to hang that came with screws with a specific head to fit it
Answer:	Yes they will as long as you can get a half inch hole drilled through metal lathe without tearing up the plaster around it.
Question:	Will this work on lath and plaster walls
Answer:	Depends on how thin or thick the wall where the TV is to be mounted. I used 8 anchors for a 65 inch TV, which weighs between 55-65 pounds. For 90lbs, I believe 4 anchors is not enough. Hope that answer helped a little.
Question:	Can I support a 90lb tv with 4 anchors
Answer:	In 1/2" drywall, the 1/4" anchor is rated at 90 lbs.
Question:	how much weight will these anchors support
Answer:	This toggle is kinda overkill for a towel bar. However, if it

Product description

Nailed It

Literally. Sure, we think they're funny too, but you didn't come here for Pinterest failures. You came here for a no drill, no stud, no bull TV mounting solution that'll hold your precious TV (cue Gollum voice) tight to the wall. Maybe handy is not your thing. Maybe you don't have a drill. Maybe you just want to up your hammerschlagen skills, and we feel that. Whatever it is that brought you here, you've come to the right spot. This bad boy (and its 32-strong nail helper #squad) holds TVs up to 100 lbs. Now seems like a good time to mention that this thing is UL certified, which means it was tested to hold 4x the stated weight (100lbs). So yeah, it safely held 400lbs. That's like, a lot.

Furiously Fast

What happens when you're working with a mount that needs no studs? The answer is magic. Magic happens - in the form of a stupid-fast installation. Got a screwdriver? Know your way around a hammer? If yes to these two things: You can have your TV up and on the wall in less than 15 minutes. (Like. A lot less. Don't believe us? Check out the installation video!)

Keep it Simple

You came looking for a simple solution and gosh dang it, a simple solution you have found! We'd actually say that shows some serious smarts. Also smart? The design of this drywall-compatible mount. Our US-based product experts engineered it to be incredibly easy to install. We've already covered the no stud, no drill story, but did we also mention the fact that there's a built-in bubble level? One less tool to bring to the party - you're welcome. Oh, and locking your TV into place? Done with the the push of a button.

Just in case we're overselling the "easy-factor" (and we're not, but our lawyers told us we should include this next bit): We've got a whole team of Echogear product know-it-alls standing by seven-days-a-week, ready to answer your questions and/or assist if something doesn't seem quite right.

Model: EGLD1

• No drilling. No, really: This mount installs directly to drywall - no studs necessary. 32 tiny-but-mighty nails work as a team to hold up to 100 pounds safely for TVs up to 77".
• With your TV sitting only 1.18" from the wall, this mount's super slim, low profile design makes it all but invisible. Plus, the bottom of the screen rests against the wall for glare-killing tilt.
• Don't need the screen tilt? We included magnetic standoffs to prop up the TV for a flush finish. Bonus: It'll also give you additional room to access cables & prevent wall scratches.
• Get it straight: Built-in bubble level means you'll get your installation jussssst right the first time. After you're done, lock it in place with the oddly satisfying safety button.
• Thanks to its universal design, this mount fits so many TVs, we might as well call it "Mr. Worldwide." Turns out, that nickname's taken, so we'll call it "Mr. Mount Compatible with VESA patterns 75mm - 625mm" instead.

User questions & answers

Question:	How does it attach to the TV
Answer:	Great question! This product attaches to the back of the TV via the top two VESA holes. If you are unfamiliar with what VESA holes are or are unsure what screws are required for your unique TV make and model let one of the Echogear Pros know. They are available 7-days a week and can be reached at 855-428-2490 or at helpmehelpyou @ echogear. com. Thanks! - Philip @ Echogear
Question:	Will this work in an RV camper
Answer:	While it may work initially, due to the movement of the RV I would expect the tv or mount to detach at some point. This style of mount is relying on gravity to keep the tv in position - there is no bottom clip. Going up and down hills, taking turns or the rare curb event will cause the tv to come lose.
Question:	So does this fit any vesa pattern? i'm specifically trying to see if it'll work for an lg 65inch with a vesa mounting standard of 300x
Answer:	It will work for your tv. I have 65 inch also
Question:	Can you mount this over an electric fireplace
Answer:	Is there a wall behind the electric fireplace? If there is, you can use this mount for hanging your TV.

• Highest Quality No Stud Anchors - The CondoMounts Heavy Duty Drywall Anchors and Screws are designed to work in either a wall or a ceiling. Our Anchors are an updated version of wing/toggle bolts, making installation up to 5x faster while using a smaller hole and holding more. 1/4"-20 screws are included in this kit for your convenience.
• A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board.
• Heavy Duty Mounting - Perfect for mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!
• Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel; plastic straps attached to the channel that position it into place; and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material.
• A Hold You Can Trust - The CondoMounts anchor channel will not rotate when installing the bolt, whether installing by hand or with a drill driver, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The Elephant anchor meets Specification FF-B-588-D for Type V anchors.

Product features

Strong & Easy-To-Use Anchors

Make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts have an ultimate tensile pull out value of 200 lbs on 1/2" drywall. Industry standards recommend 1/4 of ultimate test load.

✔They make smaller holes and are 5x faster to install the wing bolts or wing toggles

✔Pre-installs without the bolt to make handling of fixture easier

✔Reusable in the same hole – remove the bolt without losing the anchor

✔New ergonomic design – fingers grip straps more naturally and more easily with no slipping

✔Strong—up to 2x the load of an old-fashioned wing toggle

✔Save time—at least 6 minutes per anchor versus wing toggles

✔Easy Set Up—turn a 2-person job into a 1-person job

• Highest Quality No Stud Anchors - The CondoMounts Heavy Duty Drywall Anchors are designed to work in either a wall or a ceiling. Our Anchors are an updated version of wing/toggle bolts, making installation up to 5x faster while using a smaller hole and holding more. 1/4"-20 screws are required and not included in this kit.
• A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board.
• Heavy Duty Mounting - Perfect for mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!
• Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel; plastic straps attached to the channel that position it into place; and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material.
• A Hold You Can Trust - The CondoMounts anchor channel will not rotate when installing the bolt, whether installing by hand or with a drill driver, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The Elephant anchor meets Specification FF-B-588-D for Type V anchors.

Product features

Strong & Easy-To-Use Anchors

Make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts have an ultimate tensile pull out test load value of 200 lbs on 1/2" drywall. Industry standards recommend 1/4 of ultimate test load.

✔They make smaller holes and are 5x faster to install the wing bolts or wing toggles

✔Pre-installs without the bolt to make handling of fixture easier

✔Reusable in the same hole – remove the bolt without losing the anchor

✔New ergonomic design – fingers grip straps more naturally and more easily with no slipping

✔Strong—up to 2x the load of an old-fashioned wing toggle

✔Save time—at least 6 minutes per anchor versus wing toggles

✔Easy Set Up—turn a 2-person job into a 1-person job

• Top Quality No Stud Anchors - These Drywall anchors from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 5x faster than normal! Also, our kit makes a smaller hole that holds more!
• A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchor system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall.
• Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick including drywall, mdf, sheetrock, hollow block, plaster, tile, plasterboard, wallboard, sheet rock, gypsum board, buster board, cement board, custard board or gypsum panel.
• Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches, fixing lamps, bookshelves, hanging cabinets, sinks, curtain chutes, bookshelf chutes, cable trenches, hanging flower pots, water heaters and coat racks.
• Heavy Duty Kit - The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of ¼-20 hollow wall Elephant Toggle Anchors, 6 individual ¼-20 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience.

Product features

Strong & Easy-To-Use Anchors

Make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts have an ultimate tensile pull out test load value of 200 lbs on 1/2" drywall. Industry standards recommend 1/4 of ultimate test load.

✔They make smaller holes and are 5x faster to install the wing bolts or wing toggles

✔Pre-installs without the bolt to make handling of fixture easier

✔Reusable in the same hole – remove the bolt without losing the anchor

✔New ergonomic design – fingers grip straps more naturally and more easily with no slipping

✔Strong—up to 2x the load of an old-fashioned wing toggle

✔Save time—at least 6 minutes per anchor versus wing toggles

✔Easy Set Up—turn a 2-person job into a 1-person job

• ✅ SUPERIOR QUALITY - Only Metal Parts – Heavy duty METAL cleats, sturdy wall brackets and METAL fasteners along with strong triple stitched nylon webbing can easily withstand a load of upto 400 lbs – thus offering a reliable furniture safety straps - wall straps. The best part is that these anchor furniture safety straps do not have any weak link in the form of plastic component or glue.⚠️ NEVER BUY PLASTIC STRAPS when it comes to Your and Your child's safety! bookcase earthquake straps
• ✅ IMPROVED SAFETY – Secure your TV and furniture reliably with our TV / Furniture Straps, and prevent tipping over of the heavy objects, which could otherwise result in serious injuries and even fatalities in the case of babies! The pack includes a SET OF 4 TV Safety Straps plus Baby Safety L.ock as a GIFT. bookcase earthquake straps anti tip bracket for furniture anti tip furniture straps dresser anchors to wall
• ✅ EASY INSTALLATION – With all the essentials and a detailed instructions manual included in the package, you should be able to install these furniture safety straps easily, with just a few tools. Moreover, with the adjustable length of the straps, these can easily meet a wide range of individual needs – can be used to secure nightstands, TV's, desks, book shelves, bookcases, dressers, cabinets, bunk beds, monitors, drawers, cupboards. Suitable for all kinds of television (plasma LED LCD)
• ✅PEACE OF MIND & VERSATILITY–These wall anchors furniture safety straps not only offer to baby-proof the home but are also ideal for preventing tip-over of heavy objects during earthquakes, and even for securing items in moving vehicles -trailers, trucks. Even seniors in the home can hurt themselves with such tip overs -these straps can help eliminate worry while keeping you assured of everyone's safety. Earthquake straps furniture anchor furniture wall anchors for baby proofing tv straps safety
• ✅ 100% RISK-FREE SATISFACTION GUARANTEE –We also offer you 100% RISK-FREE satisfaction guarantee! Dresser anchors for baby proofing Tv straps for flat screen furniture anchors for wall tv anchoring kit arthquake straps furniture anchors furniture straps tv safety straps earthquake straps furniture anchor belt small steel prevention long adjustable clamp protection detachable extra antitip harness mount vesa nylon non tipping dual shelf childproofing babyproof babyproofing kidsproofing house

User questions & answers

Question:	Can these be screwed into dry wall
Answer:	Hello, Yes it can be screwed into the dry wall Thank you for your question Best wishes and health Ann
Question:	Ca this be used for 23 inch dell LED monitor
Answer:	Yes, so long as there are available mounting holes on the monitor, why not? You may need to acquire some specific screws, maybe some washers depending on the situation, to attach to the monitor but I don't see why it wouldn't work..
Question:	How does the lock mount? Is it adhesive or doesn't require screws
Answer:	Hi Nony, Thank you for your question! This product don’t have any adhesive parts, only metal screws and bolts. We have illustrated manual directions in our product page, after your order please write to me, I’ll send to you this pdf instructions. If you have any questions, pleas don’t hesitate to Ask, your emails come to me personally, I’ll always take care of you Best wishes and health Ann
Question:	How long each strap? thx
Answer:	36"

Product features

How Much Is Your Childs Safety Worth To You?

Anti Tip Furniture Anchor and TV Straps, Ultra-Strong Mounting Hardware Heavy Objects for Instant Earthquake, Child, Seniors and Baby Proofing (4 Pack + Gift) By Family Care

How Much Is Your Childs Safety Worth To You? Most parents think that their babies are not strong enough to climb on furniture, while they are confident that they have taught their toddlers or young children how to safely navigate their surroundings. However, as babies and toddlers lack fine motor coordination skills, they are very prone to getting themselves hurt - before you could do anything to protect them.

You're A Few Clicks Away From The Finest Level Of At-Home Safety Choosing the Anti-Tip TV and Furniture Straps is the best purchase you will make, for the duration of your baby's childhood!

Also, Finest Protection For Your Pets, Too: Active pups or agile cats will NOT be able to destroy your prized electronics, damage your pricey furniture OR injure themselves, either!

Product description

Kit Includes: Self Screws and Plastic Anchor Fasteners, Pieces Nylon wall plug without lip 5*25 - 10pc Nylon wall plug without lip 6*30 - 6pc Nylon wall plug without lip 8*40 - 4pc Chipboard screw 4*30mm - 16pc Chipboard self-screw 5*50mm - 4pc Screwdriver - 1pc Self-drill plug 14*42 - 6pc Self-drill plug 12*33 - 6pc Self-drill plug 15*28 - 6pc Pan head sheet metal screws 4.8*38mm - 6pc Pan head sheet metal screws 4*25mm - 12pc 5/8 1/2 #8 #6 stainless steel.

• ✔ Special Sale! - Reg. $19.98 Zenith Hardware 106 Pieces In a Plastic Organizer - Exterior 1/4 3/8 Hollow Ribbed Wall Plugs with drill bits for Stucco Masonry ＆ Wood Studs up to 40 lbs - - Interior Plaster Wall EZ Threaded Twist and Lock Self-Drilling Plastic, Zinc Anchors, Toggle, & Molly Bolts for Gym and Dresser up to 50 Lbs etc - - Zinc Screws- - Ultimate Indoors and Garden Assorted Set Solution
• ✔ Assorted Variety Pack - Set has both Large and Small 8 Different Types of Fasteners - Equipped for All of Your Home Gardening Tasks. Uses: Baby Safety, Curtains, Hang Kitchen and Bathroom Lighting Fixtures or Accessories, Cabinets, Bookshelf, Furniture, Wall or Shelf Mounting, Art Hanger, Photo Frame Hooks or Hangers, Concrete.
• ✔ DIY Easy Installation - Give your projects the professional finish they deserve. We designed this kit to meet all of your professional needs from repairmen to assemblymen amateur, even diyers
• ✔ Special Bonus - Drill Bits Set including Phillips Slotted Torx for all your future projects bubble level added in as a special bonus Complete Tool Kit With Self-Tapping Rubbermaid Screws.
• ✔ 10 Year Warranty - Included Rust and Corrosion on All Zenith Hardware Household Maintenance Tools & Kits. See Our Other Zenith Hardware Products: Picture Hanging & Hammer Kits, Traceless Hooks, Sheetrock Black Coarse Gypsum Board Screws. Wood or Sheet Metal Screw Kits. Self-Tapping Screws Sets & Wing Nuts

• No Stud Required Mounting - No stud? No problem! The CondoMounts Complete tile Mounting Kit Can support up to 90lbs on drywall making it the strongest hollow wall anchor available in the market. Now you can complete your DIY projects with confidence and ease!
• The Complete Kit – Save multiple trips to the hardware store! Our Complete Tile/Marble/Granite Wall Mounting Kit includes One 1/2" diamond drill bit, 4 pieces of 90lbs hollow wall toggle anchors, 4 pieces of ¼-20 x 2’’ Stainless Steel screws, and 4 individual ¼’’ washers. A Screw length of 2" is provided catering to most wall types.
• Other Mounting Uses – The CondoMounts Tile Mounting Kit can also be used for other home applications including Mounting Sinks, Cabinets, Bathroom Accessories, Grab Bars, Vanities, Draperies, Curtain Rods, Blinds, Mirrors and so much more!
• Mount On Almost Any Surface - The 4 elephant anchors provided can be used to mount almost anything to many different types of material. The tiles will have different types of backings, These include Gypsum board, Drywall, Tile, granite, marble over drywall/cement board, Plasterboard, Composite panels, Cement board, Greenboard, Plaster, and Stucco.
• A Must Have Kit for Tile Mounting - This mounting kit provides everything you need for your tilt or fixed TV wall mount to be safely mounted onto a tiled wall. Use a minimum of 4 wall anchors for safe installation. Consult with a professional before mounting for any items weighing more then 90lbs.

User questions & answers

Question:	Are the screws stainless steel
Answer:	Yes. The screws provided are stainless steel. Save to be used in the bathroom.

Product features

Strong & Easy-To-Use Anchors

Make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts have an ultimate tensile pull out test load value of 200 lbs on 1/2" drywall. Industry standards recommend 1/4 of ultimate test load.

✔They make smaller holes and are 5x faster to install the wing bolts or wing toggles

✔Pre-installs without the bolt to make handling of fixture easier

✔Reusable in the same hole – remove the bolt without losing the anchor

✔New ergonomic design – fingers grip straps more naturally and more easily with no slipping

✔Strong—up to 2x the load of an old-fashioned wing toggle

✔Save time—at least 6 minutes per anchor versus wing toggles

✔Easy Set Up—turn a 2-person job into a 1-person job

Product description

Swpeet Both Slot Headed and Phillips Headed Drive Bolts.



Sizes: 1/8", 3/16" and 1/4".



Toggle Wing Nut Dimensions：

1-9/16" x 1/16" x 3/8" (L x W x H) (10pcs),

2" x 9/16" x 1/2" (L x W x H) (8pcs),

2-1/8" x 11/16" x 9/16" (L x W x H) (6pcs).



Package included:

1/8" x 10pcs

3/16" x 8pcs

1/4" x 6pcs

User questions & answers

Question:	Hd suggested these for bar in shower to grab onto. Going through tile grout and wire mesh. Thinking 3 on each end so 6 total. Will that be strong
Answer:	Yes ... great!!
Question:	Will they work on the thin vinyl planels of mobile home walls
Answer:	I don’t know definitively but the bolts are very sturdy
Question:	How much weight can each one hold
Answer:	Each on is different. Back the screw our to it is just in the hinge. Then you can strighten toggle out alignen with the screw. This is the smallest it can get. Measure the toggle at the hinge. Remembet it is squar and it has to fit in a round hole so make it a little bigger.
Question:	How big do the holes have to be to insert the folded toggles
Answer:	There's a lever inside of the handle against the blade to hold it in place. If you can push it to the left with your thumb, you will be able to close it easily