13 best strongest drywall anchor

Product description

Depending on application, can be rated up to 300 Lbs. in drywall, with Millions of installations and no issues. The Master Anchor super duty utilizes a # 10 stainless steel screw, which is ideal for flat screen TV mounts and commercial products. Typical installations include  Flat Screen TV's *, Diaper Changing Tables, Bathroom Partitions, Commercial Products, Electrical Panel Boxes, Heavy Drapery Rods, Shelving, Cabinets, Pedestal Sinks, Dispensers, Coat Hooks, Railings, and for most Wall Mount Accessories with a base over 1-Inch.  Proudly Made in the USA. * Use for Low-Profile & Tilting Mounts only - see www.wingits.com

• Fasteners
• Made in America
• Package weight: 5.02 lbs
• Package dimensions: 18.0" L x 18.0" W x 21.0" H

User questions & answers

Question:	im buliding a shelf and it has to hold at least 200-300 poounds on only 3/4 drywall . its going to be 2 L brackets. will it hold
Answer:	No, that will not work. These are made to be in the wall all the way. You can then put the type of hanger made for the speaker and not fear of it pulling out of the wall. There is a screw hole in the fasteners with supplied screws for putting your hanger.
Question:	I need to hang a speaker it does have a hole on the back of it so you can put the head of the bolt inside slot can you screw it back out slightly
Answer:	The WingIts Apache 3/4" drill bit recommended. This precision cutting tool was developed to drill fast clean holes in wall tile and wallboard making the installation of, World’s Strongest Fasteners™, quick and easy! • Rated at 200 holes in ceramic wall tile • Drills holes through ceramic wall tiles in seconds • No hammer drill required - this precision cutting drill does all the work • Industrial grade carbide cutting tool • Engineered for standard and cordless drills • Designed for ceramic, marble, plaster, steel, glass and lathe
Question:	Is there a drill bit available for this that can be used in a driver (hex base
Answer:	Not sure about stainless I dont think it would work if it was. There are multiple sizes available. I use #10 for my 55" TV and have no problems
Question:	is the mount also made of stainless steel and is it available in a larger size
Answer:	Sorry, we don't have 1/4-20 rivet nuts with .530 to .533 body diameter.

Product features

WingIts Pure Stainless Steel Bath Accessories

Proudly made in the USA, WingIts bath accessories include, grab bars, towel bars, footrests, curved shower rods, corner shelves, robe hooks, toilet paper holders, tub benches, shower seats, and floating shelves. WIngIts product innovations in design, technology and, installation are so revolutionary, they're patented.

WingIts Fasteners

WingIts products are easy to install into adequate structural blocking or using WingIts Patented Fasteners. The GBW40 is rated to 800lbs

WingIts Patented BridgeBind Technology

WingIts is made with 100% recyclable reclaimed stainless steel. WingIts products are welded together using a patented BridgeBind technology that creates the ultimate structural strength and beauty. The product surface is polished to a mirror-like brilliance using tri-linear buff technology.

MODERN Elegance Collection

Only WingIts crafts polished stainless steel products vs chrome plating and inferior metals.

Clean flowing lines accent the durability and distinction. Patented BridgeBind Technology creates the ultimate structure.

Product description

Depending on application, can be rated up to 300 Lbs. in drywall, with Millions of installations and no issues. The Master Anchor with Hook Plate utilizes a # 8 stainless steel screw which is an ideal size for most bathroom accessory items and window dressing brackets. Typical installations include Hanging Heavy Mirrors and Pictures, Bath Accessories, Window Dressings, Mail Boxes, Hose Reels, Heavy Drapery Rods, Shelving, Cabinets, Pedestal Sinks, Dispensers, Coat Hooks, Railings, and for most Wall Mount Accessories with a base over 1-Inch. Proudly Made in the USA.

• Our patented WingIts' Fasteners NEVER Loosen
• Installs in all hollow walls in just minutes and lasts a lifetime
• Objects can be easily removed and replaced
• Even works in the holes created by others failure
• Install using the Apache200 Drill Bit (RC-WA200GTS34) to drill through the material easily with your cordless drill

User questions & answers

Question:	i want to know if this hook is with nail or adhesive please
Answer:	The hook plate on the Master Anchor is designed for picture wire. Please contact our Customer Service Department for further assistance at 877-894-6448.
Question:	Will this hook work for a keyhole style bracket
Answer:	Yes... The anchor part is plastic and bolt is stainless.. You may find similar or same thing at HomeDepot too...
Question:	Is any part of the anchor plastic
Answer:	WingIts Master Anchors are designed for hollow wall construction. Please contact our Customer Service team at 877-894-6448 to discuss your application.
Question:	RV friendly
Answer:	It should hold. I would use a minimum of 2 per l bracket. Just make sure you realize you need to drill a 3/4" hole to get them into the wall

Product features

WingIts Pure Stainless Steel Bath Accessories

Proudly made in the USA, WingIts bath accessories include, grab bars, towel bars, footrests, curved shower rods, corner shelves, robe hooks, toilet paper holders, tub benches, shower seats, and floating shelves. WIngIts product innovations in design, technology and, installation are so revolutionary, they're patented.

WingIts Fasteners

WingIts products are easy to install into adequate structural blocking or using WingIts Patented Fasteners. The GBW40 is rated to 800lbs

WingIts Patented BridgeBind Technology

WingIts is made with 100% recyclable reclaimed stainless steel. WingIts products are welded together using a patented BridgeBind technology that creates the ultimate structural strength and beauty. The product surface is polished to a mirror-like brilliance using tri-linear buff technology.

MODERN Elegance Collection

Only WingIts crafts polished stainless steel products vs chrome plating and inferior metals.

Clean flowing lines accent the durability and distinction. Patented BridgeBind Technology creates the ultimate structure.

Product description

High-quality Zinc Self-Drilling Anchor with Screws Kit Includes 25pcs Zinc Anchors and 25pcs #8 x 1-1/4'' Phillips Screws and a Plastic Case

Applicable to 3/8", 1/2" or 5/8" gypsum wallboard, No Pre-Drilling Needed, Anchors can be Removed

• Anchors pre-drills precise hole in types of drywall ,no hole preparation required, made of durable zinc , easily removed.
• Deep thread design provides strong engagement , locks into many sizes of drywall 3/8”, 1/2” or 5/8” gypsum wallboard.
• Kit Includes 25 Zinc Anchors, 25 #8 x 1-1/4'' Phillips Screws
• Hangs up to 50 lbs

User questions & answers

Question:	Could these be used as anchors to hang light\medium weight things in wood paneling? The plastic kind dont work
Answer:	I do not understand the purpose of the screw being flush with the wall. How could it possibly be flush while also hanging something on it??? Even a simple wire from a picture frame/painting would need the screw to be slightly out in order to hang it. Good luck with what you are doing!
Question:	The screws are longer than the anchor. So how does that work? Does the screw just stick out? I want to have the screw flush with the wall
Answer:	Yes, these are very easy to use (even for a DIY Woman). The one watch out is these anchors are made from Zinc, so they are fairly fragile. I would not recommend if drilling into walls in an older home that are plaster or older Sheetrock as they will break.
Question:	Is this easy to use by a diy ignorant woman? I have pictures I want to hang on drywall
Answer:	25pcs Zinc anchors,25pcs Screw,total 50 pcs,
Question:	Does this come in 100 pieces or 50 pieces, web page says both (see 2nd picture on front page
Answer:	Not really nails, but screws...but be careful you don't let one slip behind the darn wall! 

Product description

Wing Its MASTER Anchor Fasteners’ structural plastic and stainless-steel construction secure objects in drywall and even work in existing holes created by other anchors’ failure. Rated up to 300lb in shear, depending on wall conditions. Objects projecting off the wall substrate will greatly reduce load capabilities. Supports most bathroom accessories and can be used for: window dressings, heavy drapery rods, shelving, cabinets, pedestal sinks, dispensers, coat hooks, railings, and most wall-mounted accessories with 1" base or larger. Objects can be re-positioned easily without impacting anchor integrity. This listing is for pkg. of 6. Proudly made in the USA.

From the Manufacturer

Depending on application, can be rated up to 300 Lbs. in drywall, with Millions of installations and no issues. The Master Anchor utilizes a # 8 stainless steel screw which is an ideal size for most bathroom accessory items and window dressing brackets. Typical installations include Bath Accessories, Window Dressings, Mail boxes, Hose Reels, Heavy Drapery Rods, Shelving, Cabinets, Pedestal sinks, Dispensers, Coat Hooks, Railings, and for most Wall Mount Accessories with a base over 1-Inch.  Proudly Made in the USA.

• Country of Origin: CHINA
• The Package Length of the product is 18 inches
• The Package Width of the product is 18 inches
• The Package Height of the product is 21 inches

User questions & answers

Question:	The description says to use apache200 drill bit (rc-wa200gts34), yet a search turned up empty
Answer:	Don't think so, the stainless steel screw is only 1/8" in diameter. Sink's typically use 3/8" or larger lag bolts.
Question:	Would these work to hang a wall sink
Answer:	Yes, I have just 2 of them on my Hand Rail and I'm 400 pounds... See the Youtube Videos on this product....
Question:	Are they safe to use for a grab bar in the shower? The grab bar I intend to install has three screw points at each end. So a total of 6 anchor points
Answer:	Each anchor comes with a long screw. As the screw is inserted and tighten, the anchor "grabs" the drywall from the inside of the wall. They are remarkable! Please think through what you are trying to accomplish. I have used them successfully in hanging a new television and a large picture. Plan your project to insure this is what you are looking for. This is a remarkable product when used for the right project. Good luck!
Question:	Does this product come with the screws or is it just the anchors
Answer:	I think it'd matter how thick the wood paneling was (also, if it's similar to plywood ie: chipped material on the back side). Depending on picture weight, maybe try some of those Command strips/hooks. If the grooves on these anchors lined up, it might work, but I'm concerned about how thick/sturdy the paneling is. Also, it'd be a fair-sized hole left if it didn't work. In other words, I'm guessing... Good luck!

Product features

WingIts Pure Stainless Steel Bath Accessories

Proudly made in the USA, WingIts bath accessories include, grab bars, towel bars, footrests, curved shower rods, corner shelves, robe hooks, toilet paper holders, tub benches, shower seats, and floating shelves. WIngIts product innovations in design, technology and, installation are so revolutionary, they're patented.

WingIts Fasteners

WingIts products are easy to install into adequate structural blocking or using WingIts Patented Fasteners. The GBW40 is rated to 800lbs

WingIts Patented BridgeBind Technology

WingIts is made with 100% recyclable reclaimed stainless steel. WingIts products are welded together using a patented BridgeBind technology that creates the ultimate structural strength and beauty. The product surface is polished to a mirror-like brilliance using tri-linear buff technology.

MODERN Elegance Collection

Only WingIts crafts polished stainless steel products vs chrome plating and inferior metals.

Clean flowing lines accent the durability and distinction. Patented BridgeBind Technology creates the ultimate structure.

Product description

The FlipToggle is the only single-strap design that takes the guesswork out of hollow-wall anchoring. Its unique design securely holds the toggle for easy insertion into the pre-drilled hole. Once inserted, the spring tab flips the toggle into the right position so that when the collar is tightened the anchor is ready for the bolt. No jammed toggles, broken straps or misaligned bolts.

Key Features: Installs into drywall and hollow CMU up to 2 1/8" thick with a 2 1/2" bolt. Bolt sizes: 1/4"-20 thread. Simple one-strap design holds toggle perfectly aligned for easy bolt insertion The collar ensures centered bolt placement in the hole and does not embed the bolt into the drywall, eliminating the potential for sagging fixtures.

Installation: FlipToggle installs in four easy steps: Fold, insert, flip and tighten -- it's that quick! The Anchor requires a 1/2" hole and a 1/4"-20 screw (included 2-1/2" long)

Specifications SAFE WORKING LOADS 2:1** Ultimate Tensile and Shear Strength Values 1/2" Drywall - Ultimate Tension 181 lb, Safe Tension 90 lb 5/8" Drywall - Ultimate Tension 299 lb, Safe Tension 149 lb) Hollow Concrete Block - Ultimate Tension 1030 lb, Safe Tension 515 lb ** Loads may vary according to the quality of the drywall or concrete hollow block. Warning: Use one-half or less of listed maximum values for safe working loads (as required by local regulations). What's in the Box? (10) Flip toggle anchors (10) 1/4"-20 UNC bolts Environmental conditions: Indoor, dry conditions Material composition: Polypropylene, Steel, zinc-plated, Plastic

• New one strap design for easier insertion and flipping operation
• Ideal for all type of hollow wall, up to 3" (75mm) thick
• Requires an one half inch hole
• Fast and easy installation
• Eliminates the potential for sagging fixtures

User questions & answers

Question:	Anyone know if anyone makes these longer than
Answer:	The package comes with 2 1/2" bolts, once the anchor is installed you can try the 1" bolt if necessary.
Question:	Will a 1" bolt work
Answer:	Once the fastener is installed, the screw goes in to the threads on the metal toggle.
Question:	Once the toggle is pushed in the wall, is the bolt directly screwed into the metal wing (toggle) itself or does it only screw into the plastic part
Answer:	I just used a 3/4 flat wood spade bit. Because there was already a 3/8' hole in the drywall, it was a little tricky getting the flat bit to stay center. I simply ran the drill full speed and prayed. It all worked out. It would have been easier with a normal 3/4" drill bit because it would have self-centered. But I did not have one and did not want to go buy one. You might look at these http://www.amazon.com/gp/offer-listing/B00HQNSTNE/ref=dp_olp_new?ie=UTF8&condition=new . Hope this helps. Wish you well.

• High quality anchors pre-drills precise hole in types of drywall - No hole preparation required, Constructed from durable zinc to last for years. Can be easily removed
• Deep thread design provides strong engagement, locks into many sizes of drywall (⅜", ½",⅝") for maximum holding power. Starts easier than other self-drilling drywall anchors
• Large Anchor holds up to 50 lbs, good for heavier applications such as big pictures, shelves, and artwork.
• Mini Anchor holds up to 40 lbs, leaves smaller footprint, good for applications where anchor needs to be hidden
• Kit includes 25 Large Anchors, 25 Mini Anchors, 25 #8 X 1-¼” screws, 25 #6 X 1-¼” screws.

User questions & answers

Question:	I have 4,12 inch z bars on 82x42 mirror 2 on the left 2 on the right side all together 12 holes think 4 holes will go to a stud but need 8 anchors
Answer:	I would use something much stronger for a grab bar, not these.
Question:	Will these work in tile in the shower for a grab bar
Answer:	I agree with the other commenter. It probably would be wise to drill a pilot hole before sinking these anchors in a plaster wall.
Question:	Would these work with plaster walls
Answer:	Yes, the anchors are open. These are great: sturdy, easy to install - no drill needed. I'll never buy the plastic ones again.
Question:	Are the anchors open on the end so the screw tip can pass through
Answer:	No, it's not designed to open at the end. The threads holds it tight in the drywall.

Product description

The FlipToggle is the only single-strap design that takes the guesswork out of hollow-wall anchoring. Its unique design securely holds the toggle for easy insertion into the pre-drilled hole. Once inserted, the spring tab flips the toggle into the right position so that when the collar is tightened the anchor is ready for the bolt. No jammed toggles, broken straps or misaligned bolts. Key Features: Installs into drywall and hollow CMU up to 2 1/8" thick with a 2 1/2" bolt. Bolt size: 3/16"-24 thread. Simple one-strap design holds toggle perfectly aligned for easy bolt insertion The collar ensures centered bolt placement in the hole and does not embed the bolt into the drywall, eliminating the potential for sagging fixtures. Installation: FlipToggle installs in four easy steps: Fold, insert, flip and tighten -- it's that quick!

The Anchor requires a 1/2" hole and a 10-24 screw (included 2-1/2" long)

Specifications

 

SAFE WORKING LOADS 2:1**

Ultimate Tensile and Shear Strength Values

• 1/2" Drywall - Ultimate Tension 67 lb (38 kg), Ultimate Strength 106 lb (57 kg)
• 5/8" Drywall - Ultimate Tension 107 lb (52 kg), Ultimate Strength 188 lb (74 kg)
• Hollow Concrete Block - Ultimate Tension 415 lb (203 kg), Ultimate Strength 435 lb (204 kg)

** Loads may vary according to the quality of the drywall or concrete hollow block.

Warning: Use one-half or less of listed maximum values for safe working loads (as required by local regulations).

• What's in the Box?
• (10) Flip toggle anchors
• (10) 3/16"-24 UNC bolts

Environmental conditions: Indoor, dry conditions

Material composition: Polypropylene, Steel, zinc-plated, Plastic

• New one strap design for easier insertion and flipping operation
• Ideal for all type of hollow wall, up to 3" (75mm) thick
• Requires an one half inch hole
• Fast and easy installation
• Eliminates the potential for sagging fixtures

User questions & answers

Question:	Can a different sized screw work? Have shelves I want to hang that came with screws with a specific head to fit it
Answer:	Yes they will as long as you can get a half inch hole drilled through metal lathe without tearing up the plaster around it.
Question:	Will this work on lath and plaster walls
Answer:	Depends on how thin or thick the wall where the TV is to be mounted. I used 8 anchors for a 65 inch TV, which weighs between 55-65 pounds. For 90lbs, I believe 4 anchors is not enough. Hope that answer helped a little.
Question:	Can I support a 90lb tv with 4 anchors
Answer:	In 1/2" drywall, the 1/4" anchor is rated at 90 lbs.
Question:	how much weight will these anchors support
Answer:	This toggle is kinda overkill for a towel bar. However, if it

Product description

• Residential drywall anchor provides a firm hold from within 3/8"- to 1/2"-thick drywall
• Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
• Made in USA, and includes #8 x 1-1/2" screws
• Ultimate tensile strength is 143 lb. in 1/2" drywall with a #8 x 1-1/2" screw
• Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)

User questions & answers

Question:	Would these be good for hanging a bike rack in drywall? The rack is under 2 lbs, the bike weighs about 45 lbs. and will hang vertically. Thx
Answer:	Dry wall is over hollow space. Nothing is filled behind drywall, so yes. They are for hollow walls and for dry walled wall, because it’s the same thing.
Question:	The description says these anchors are for drywall and thick walls. Yet the image shows they are superior hold for hollow walls. So which one is it
Answer:	Hi, for these toggle bolts we recommend a #25 drill bit. Regards

• Drill Point Pre-drills precise hole in wood or double drywall etc. No hole preparation required
• Starts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud
• Deep thread design provides strong engagement in 3/8”, 1/2” or 5/8” gypsum wallboard
• Zinc die-cast design for maximum durability. Can be easily removed
• Kit Includes 50 Zinc Anchors, 50 #8 x 1-1/4'' Phillips Screws and a Plastic Case, Hangs up to 50 lbs. Packaging design may vary.

User questions & answers

Question:	I don't see a size listed in terms of like a #8, are these as big as #8 size
Answer:	Yes #8 ×1-1/4
Question:	I don't see a size listed in terms of like a #8, are these as big as #8 size
Answer:	These are the best wall anchors I have ever bought. I have been in remodeling for about 15 yrs and I've never had any come close in comparison. I have a 40 pound mirror hanging in my foyer and it's been more than 4 months and it has not moved a bit. Although they don't like studs, if u happen to hit a stud using half of the wall anchor it will still work. Hope this helps....plus it says on the box it will hold up to 50 pounds per anchor.
Question:	How much weight can it hold? I need to mount a 10" water filter canister with this
Answer:	They should hold 50lbs on a vertical wall with 1/2 in. drywall. Be certain to stay away from a joint in the drywall. There should be paper just under the paint. Screw them in tight. Removing the screw will sometimes backout the anchor.
Question:	Will theses hold up to 50lbs without coming out the drywall
Answer:	We are not aware of any in a longer size.

Product description

• Self-drilling anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled hole
• Glass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted
• Made in USA, and includes #6 x 1-1/4" screws
• Ultimate tensile strength is 65 lb. in 1/2" drywall with a #6 x 1-1/4" screw
• Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)

User questions & answers

Question:	Can I use these in 1/4" wood paneling? If so, what drill bit do I need to use to get the anchor in the wall
Answer:	No, these are for drywall where there is no stud behind where you are placing the screw. If you have a stud there your simply screw directly into the stud, no anchor needed.
Question:	can these be used on wood stud
Answer:	I believe it is intended for drywall. The package indicates that the anchors support 65lbs.
Question:	Does this anchor work on a plaster wall
Answer:	These are intended to anchor screws in plasterboard - which does not have great strength pulling it perpendicular to its surface. You only use them (or a toggle bolt) if there is no other good choice - like a 2x4 available. That means if you place them an inch apart, it will do little good, as they are stressing almost the same portion of the plasterboard. I would consider mounting the cafe rod brackets to a piece of wood which you can secure to a 2x4 - or at least secure the wood to the plaster via 2 or 4 Togglers a few inches apart.
Question:	How close together can these anchors be placed? Would prefer to use 2 per cafe rod bracket, but there is just under an inch between holes for screws
Answer:	They take #8 screws

• 【SPECIFICATIONS】370pcs Kit includes 5 different size plastic ribbed drywall anchors
• 【EASY STORAGE】Comes in a handy Plastic organizer case with size compartments.
• 【GREAT QUALITY】Constructed from durable Plastic(nylon) to last for years. Can be easily removed
• 【WIDE APPLICATION】The zinc self drilling anchors are heat resistant, for light fixings in drywall (3/8”, 1/2”, 5/8”), gypsum, gypsum-carton-boards, lime, chipboards, wood.
• 【CUSTOMER SERVICE】We take pride in delivering a quality product. If, within 30 days, you are unhappy for any reason, return your kit with no questions asked.

User questions & answers

Question:	Which screwdriver should I drill this anchor
Answer:	If you install the anchor properly in the concret wall, each of #5 supports 5 lbs, #6 supports 8lbs, #7 supports 10lbs, #8 supports 13lbs, #9 supports 15lbs , #10 supports 20lbs.
Question:	What weight are these rated for? How much weight can each anchor support
Answer:	You are correct. Five of each are included.

Product features

HongWay 370PCS Plastic Wall Anchors Kit with Screws

High quality plasterboard anchors and galvanized screws ensure long service life. Screws include flat head screws and pan head screws, suitable for different using conditions, make your work perfect.

Anchors of different sizes have different colors to help you distinguish them during use.

Wide Application:

The zinc self drilling anchors are heat resistant, for light fixings in drywall, lime, chipboards, wood.

Instructions

1.Drill hole with efficient drill-bit 2.Clean the hole and embed the anchor through the object to be fixed 3.Screw the anchor 4.The fixing is done

Wide Application:

The zinc self drilling anchors are heat resistant, for light fixings in drywall, lime, chipboards, wood.

Instructions

1.Drill hole with efficient drill-bit 2.Clean the hole and embed the anchor through the object to be fixed 3.Screw the anchor 4.The fixing is done

Wide Application:

The zinc self drilling anchors are heat resistant, for light fixings in drywall, lime, chipboards, wood.

Instructions

1.Drill hole with efficient drill-bit 2.Clean the hole and embed the anchor through the object to be fixed 3.Screw the anchor 4.The fixing is done

Wide Application:

The zinc self drilling anchors are heat resistant, for light fixings in drywall, lime, chipboards, wood.

Instructions

1.Drill hole with efficient drill-bit 2.Clean the hole and embed the anchor through the object to be fixed 3.Screw the anchor 4.The fixing is done

Product description

High-quality Zinc Self-Drilling Anchor with Screws Kit Includes 100pcs Zinc Anchors and 100pcs #8 x 1-1/4'' Phillips Screws and a Plastic Case

Applicable to 3/8", 1/2" or 5/8" gypsum wallboard, No Pre-Drilling Needed, Anchors can be Removed

• Anchors pre-drills precise hole in types of drywall ,no hole preparation required, made of durable zinc , easily removed.
• Deep thread design provides strong engagement , locks into many sizes of drywall 3/8”, 1/2” or 5/8” gypsum wallboard.
• Kit Includes 100 Zinc Anchors, 100 #8 x 1-1/4'' Phillips Screws and a Plastic Case.
• Hangs up to 50 lbs

User questions & answers

Question:	How many pounds do these hold? I don’t see it listed anywhere
Answer:	No. Despite what seller says, there's no way to use this product in a concrete or plaster wall. It is for drywall only. In a concrete or plaster wall you need to drill a pilot hole and insert a plastic or metal sleeve anchor, not a threaded anchor like this.
Question:	Can use this in concrete walls
Answer:	Yes, they can
Question:	Will these work on plaster walls
Answer:	If the paneling is backed by drywall, it should work. You might have to drill a pilot hole to help it get started. If it's just a1/4" panel, no drywall, you probably need to add a backer board or butterfly clamp instead of a drywall anchor.

Product description

Independent strength tests on ⅝ inch drywall show that GeeFix is up to four times stronger than other heavy duty wall anchors on the market! Designed and Made in Britain, GeeFix represents the cutting edge in wall anchor technology and is taking the U.K. by storm. Now available in the U.S. exclusively through GeeFix USA. GeeFix is a versatile heavy duty drywall anchor system with unrivaled strength. Suitable for all types of hollow wall construction including drywall, plasterboard, hardboard, plywood, sheet metal, chipboard, MDF, lath and plaster and other materials. Mount heavy items to your walls without using a stud. . **Requires a 1" spade bit or hole saw. Watch how easy GeeFix is to install at www.youtube.com/watch?v=HMa8LUH2wm8 Ideal applications include: Flat screen TVs, Computer Monitors, Ceilings, Curtains, Cabinets, Closet Rods, Blinds, Baby Gates, Bike Hooks, Floating Shelves, Flat Screen TVs, Grab Bars, Hanging TVs, Wall Art, Kitchen Cabinets, Large Mirrors, Plaster Walls, Shelves, Speakers, X-Ray Rooms, Hollow Walls, Furniture Straps, and many more... www.GeeFixUSA.com

• Strongest hollow wall anchors on the market
• Maximum shear load is 595lbs and maximum tensile load is 156lbs
• Maximum cantilever load at 12 inches is 224lbs
• Industry safety standards recommend ¼ of the ultimate load. The above maximum load-testing figures are for in 5/8 in drywall and are provided as guides only and cannot be guaranteed. The age, condition and capacity of base materials must be considered.
• Requires a 1" spade bit or hole saw. Hole saw is recommended for plaster walls.

User questions & answers

Question:	Hi, will these also do just as well with single-stud wall mounts? Since the weight would be distributed to lesser of an area in the wall? Thanks
Answer:	Yes. It addressed 2 challenges I was having: no stud and difficulty getting alternatives (moly-bolts(?), expansion sleeves, ...) to work. Was driving me nuts. This product solved my problems. 2 minor issues: takes more real estate that alternatives; need to really pay attention to hole alignment. High.y recommend.
Question:	Will this product work to anchor furniture to the wall, a dresser, if i dont know where the stud is? Thanks
Answer:	Detailed instructions can be found at the manufacturer's website (http://www.geefix.com/instuctions). The basic steps are:1. Cut a 1" hole in your wall surface2. Slide the back plate of the assembled GeeFix through the hole3. Use the blue cord to align the screw holes of the back plate and wall plug4. Drive in all three mounting screws, center screw firstOnce your GeeFix is installed, the center screw can be used to mount your item, or you can use your own mounting hardware in the center hole of the GeeFix.
Question:	How is this installed
Answer:	There are 3 main types of load tests: shear, tensile and cantilever. The weight rating that you see on many wall anchors only refers to shear strength (hanging a picture on a wall). By contrast, many of the most popular uses of wall anchors - such as shelving or TV wall mounts - apply all three forces on the wall anchor. Because of the wide variation in the ways people use them, the engineers at GeeFix are more cautious than other manufacturers in claiming a certain weight capacity, but the bottom line for the GeeFix system is that it holds more than any other commercially available anchor system under all three load types. The most demanding test of a wall anchor is a cantilever load. If you go to our website at www.geefix.com, on our gallery page you can see comparison test to other common wall anchors and an image of one of our engineers sitting on a shelf with a cantilever of 12 inches (don't try this at home). The engineer weighs 194lbs. The shelf is fixed into 1/2 inch drywall plasterboard. The shelf holds firm.
Question:	Can someone please be more specific about how heavy a load each GeeFix anchor will hold
Answer:	Hi, it total about 1.52 pounds.