12 best shank type milling cutters

• 🛠 High Quality -- 1/8" end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
• 🛠 Cost-Effective Kit -- 5 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat End Mill and Nano Gold Coated V-shape CNC Router Bits, satisfying your different needs.
• 🛠 Advantage -- Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
• 🛠 Parameter -- Overall Length（OAL）: 38mm; Shank Diameter（SD）: 3.175mm( Suitable for er 1/8'' chucks) If you have a 1610/3018/3018pro/3018-M/ 3020/ 6040 engraving machine, this milling cutter will be a good replacement !
• 🛠 Wide Application -- PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.

User questions & answers

Question:	What feed rates should be selected for each plywood cutter
Answer:	The set I got have 1/8" shanks and are 1 1/2" long. I don't know about the "angle"--the shapes are as shown in the advertisement. I will say they cut much quicker and easier than any other burrs I've gotten (I use them for carving gourds). With these "crosscut" burrs, I can carve without needing to first remove the outer skin of gourds--that outer skin is quite tough.

Product features

10pcs Nano Blue Coat End Mill

• 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm)
• 3.175mm(SD) x 12mm(CEL) x 37mm(OAL)

10pcs Flat Nose Spiral Bit 2-Flute Upcut

• 3.175mm(SD) x 3.175mm(CED) x 17mm(CEL) x 38mm(OAL)

10pcs Ball Nose Bit 2-Flute Upcut

• 3.175mm(SD) x 2mm(CED) x 17mm(CEL) x 38mm(OAL)

10pcs Gold Coated V-shape Bit

• 3.175mm(SD) x 10degree x 0.1mm tip x 31mm(OAL)

10pcs V-shape Bit

• 3.175mm(SD) x 20degree x 0.2mm tip x 31mm(OAL)

50pcs in total, each 10pcs

ADVANTAGE:

• High Hardness -- Cemented carbide material, good wear resistance.S
• harp Cutting Edge -- Clean surface, carved lines are flat and burr-free.S
• mooth Chip Removal -- Wide groove, timely discharge of wood chips, making milling faster.

COMPATIBLE :

• Desktop Engraving Machine : 1610, 3018, 3018pro, 3018-M, 3020, 6040 and so on.
• CNC machines (the spindle is equipped with the ER series chuck)

NOTE:

• Not for milling stones and high hardness metal
• The end mill CNC bits is designed for hand-held and desktop carpenter machines, cannot be used on percussion drills and drilling machines
• The length of the milling cutter protruding from the chuck should not be too long to avoid broken knife
• Properly reduce milling speed and feed speed to extend the life of the milling cutter

Product description

#404 Woodruff Cutter 1/2 x 1/8 With 1/2 Shank.

Product description

1pc Rabbeting Bit Tool Router Bits, 6mm 1/4 Inch Shank T Type Bearings Wood Milling Cutter

• 1pc Rabbeting Bit Tool Router Bits, 6mm 1/4 Inch Shank T Type Bearings Wood Milling Cutter
• Great for woodworking, edging, trimming, grooving and woodworking projects.
• High wear resistance and high precision grinding technology.

• KOWOOD PRO Tongue and Groove router bit set is an upgraded new product. Which is specifically designed for the high quality demanded by woodworking industrial application
• KOWOOD PRO C3 carbide with a new process of heat treatment shank support this set of bit in heavy-duty and maximum durability
• Precisely machined carbide for clean and accurate trimming, grooving for all types of wood material. With adjustable washer to adjust the spacer quantities as necessary to achieve the desired fit
• Wide use application and suitable for woods, laminate, particle board, plywood compact panel.
• Universal 1/4” Shank suitable for all major benchtop router table such as KOWOOD, Bosch, DeWalt, Makita, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker. (benchtop router table use only)

User questions & answers

Question:	Can these be used to tongue and groove 1 inch pine boards
Answer:	It is made in China.
Question:	what is the country of origin
Answer:	Yes, of course.
Question:	Can these be used with a benchtop router table
Answer:	Generally speaking, benchtop router tables are better for working with smaller pieces of material that may not be able to support the base of a hand-held router. Handheld routers are generally better for when you're working with larger pieces of material which may be harder to support on the surface of a router table. We are strongly recommended to use a benchtop router table rather than a handheld router although both can fit the groove and tongue bit for work. The major is safety reasons, a table router should always be used when using larger router bits (1 ¾ inch or 44mm in diameter). Larger router bit may be harder to control when using a hand-held router, especially when cutting the edge of a material. Also, Router tables provide a more stable with these large cutters. A handheld router is easy to cause the unstable angle of milling and may bend or break the shank due to the material limited.
Question:	what aspect of this router bit limits it to "benchtop router table use only
Answer:	Hi, it is 60mm, 2.36 inch, thank you

Product features

Anti-Kickback Design

Controls depth of cut and minimizes the chance of kickback, reducing the risk of injury

Frictionless Coating

KOWOOD PRO special coating prevents bit from heating up, reduces pitch build-up, protects against corrosion and provides a longer bit life

Hi-Density C3 Carbide

KOWOOD PRO using SUBMICRON GRADES C3 carbide, it helps prevent material failure and increase cutting life

Multi-Layer Metal Brazing

KOWOOD PRO series brazing in multi-layer by silver and copper to protect the carbide tip when cutting harder wood or wood composites and reduces the change of failed welds

Three Axis Grinding Create A Long-Lasting Mirror Finish

Each cutting edge is specify designed and precisely sharpened to the micron, in order to produce the best cutting angle, maximum durable

Product description

Set 8 Pcs Dp16 No1 :Z12~13; No2 :Z14~16; No3 :Z17~20; No4 :Z21~25; No5 :Z26~34; No6 :Z35~54; No7 :Z55~134; No8 :≥135

• Set 8 Pcs Dp16 ：pressure angle: 14.5 degree
• Set 8 Pcs Dp16 ： Outside Dia: 55mm
• Set 8 Pcs Dp16 ：inner Bore: 22mm
• R8 shank gear cutter holder fitting for hole 22mm gear cutter
• R8 shank gear cutter threaded 7/16(Inch)

User questions & answers

Question:	Is this module
Answer:	I believe so, definitely not carbide. They work well just keep them lubricated and don't get over jealous. I've just started learning to cut gears and my first attempt came out very well.
Question:	Are the cutters HSS
Answer:	If the drill chuck is mounted in an R8 spindle. Pop the chuck out and chuck this up. Else, no. Plus how are you rotating the gear? How are you moving it across the cutter with any precision? You normally need an indexer and a mill table, or possibly a mill/drill with a moving table. I have good results with this set but I use a Bridgeport and an indexer.
Question:	Can I stick this in a drill press? For a small gear
Answer:	MAX RPM is 35000 Recommend 25000

Product description

Specifications:

Shank Type: R8

Drawbar Thread:7/16-20

Can used for 22mm Gear Cutter or other Milling Cutter



Package Includes:

1pcs of Shank Milling Arbor

• 22mm R8 Shank Milling Arbor Gear Mill Cutter Holder
• Shank Type: R8
• Drawbar Thread:7/16-20
• Can used for 22mm Gear Cutter or other Milling Cutte
• USA Stock - The packages are shipped fron our USA warehouse, taking about 3-8 work days to deliver. If you have any problems, please contact us at any time and we will try our best to help you to solve it.

• Product information: 24 Piece comes with all 1/4-inch round shank bits that will fit any 1/4-inch router shank
• Set includes: 1/2” mortising , 1/2” combination bevel , 3/8” dovetail , 1/2” dovetail , 1/2” 90 degree V-groove , 3/8” round nose , 1/2” round nose , 3/8” trimming , 1/4” panel pilot , 1/4” straight , 3/8” straight , 1/2” straight , 3/4” straight , 1/2” flush trim , R1/8” round over , R3/16” round over , R1/4” round over , R3/8” round over , R1/4” cove , R3/8” cove , 1/2” 45 degree chamfer , 1/4” Roman Ogee , 1/4” slot cutter , 1/2” rabbeting
• Accurate and Neat: Tungsten carbide tipped cutters make clean and accurate cuts on all types of wood to slice smoothly into stock producing clean and splinter free
• Multi-purpose use: Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists
• Easy Storage: Packed with wooden index case for easy storage and organization

User questions & answers

Question:	I need to cut t/g in 4x8 plywood sheets; do these bits have to be mounted on a router table? i have a powerful festool 12a router
Answer:	Si son compatibles con todo
Question:	Estas fresas son compatibles con la router Makita
Answer:	I received blue tipped bits.... And they work really well... I would purchase this set again, if needed....
Question:	What color do you get red or blue
Answer:	I would think they should as long as a 1/4" shank will fit in the collet of your router. They work well in my 20+ year old Craftsman router.
Question:	Do theses bits work with most router machines
Answer:	This model is work for wood boards with thickness under 3/4”

Product features

Wood Box Storage

• Stored in a wood box.
• Organized and easy to reach.

Premium Quality

• Made with industrial grade material
• High abrasion resistance, high-precision grinding technology

Multiple Application

• Perfect for edging, trimming, veining and grooving in solid wood, MDF, particle board, plywood, etc.
• Using for hand making a furniture or other woodworking
• Suitable for wood flooring, wainscot paneling and shaker style panel doors

Smooth Cutting

• A clean and accurate cut
• Bearing: Totally enclosed & lubricated

Product description

This adjustable fly cutter has a 3/8" diameter and short profile making it ideal for ER-16 or 2MT spindles, but will also work wonderfully well on larger mills with R8 or 3MT spindles.

• Adjustable from 1-1/4" to 2-1/2" inch cuttng diameter
• Allen key for set screws
• 1-1/8" Height
• 3/8" Shank
• Includes presharpened 1/4" Left Hand tool bit

Product description

Specification:

-Material: HSS,with a titanium coating

-Type: straight, trim, V groove, beading, cove, slot cutter and more

-Shank diameter:1/8inch(3mm)

-Length: 1.57inch(40mm)

-Quantity: 10pcs



Features:

-10pcs Mini Router Bits for Carpentry

-This is a new set of 10 mini router bits

-They can be used with a Dremel tool

-Each has a 1/8" (3 mm) shank

-Ideal for Carpentry, Home Improvement, Crafts, Hobbies & More

-Premium-Quality router bit set in the highly sought after 1/8" shank size.

-Includes the 10 most commonly used types: straight, trim, V groove, beading, cove, slot cutter and more.

-These rugged bits are made of tough High Speed Steel HSS and are Titanium coated!

-Transforms your rotary tool/dremel/die grinder into a high speed router for extra fine detail routing & shaping.



Package Include:

1x Slot cutter Diameter 3.2mm

1x Slot cutter Diameter 5.0mm

1x Slot cutter Diameter 6.5mm

1x Rounding over cutter Diameter 6.4mm

1x V-Slot cutter Diameter 6.5mm

1x Combi cutter 6.5/2.5mm

1x Core box bit 3.2mm radius

1x Rebating cutter 6.4mm

1x Edge cutter with pin Diameter 5.0mm

1x Half round cutter Diameter 13mm

• [High Quality]Made of high quality high speed steel and coated with titanium for long life and exceptionally precise cuts the first time, saving you energy and stress
• [For Most Rotary Tools]A valuable addition to any woodworker's rotary tool, suitable for most rotary tools including DREMEL, Craftsman, Chicago and more
• [Various Type]10pcs of most commonly used router bit types including straight, trim, V groove, beading, cove, slot cutter and more to meet your different needs,and comes with a convenient reusable yellow-colored plastic storage case, so you can keep your bits organized and safe
• [Size]Shank diameter:1/8’’(3mm),Total Length:1.57’’(40mm)
• [Using for most materials]Able to engrave on a wide range of materials including: wood, aluminum, Metal, ABS, acrylic, PVC, plastics, etc. Well-suited for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings and planes

User questions & answers

Question:	Will this fit my Dremel
Answer:	Yes, they do fit a Dremel or any similar tool. The bits have an 1/8” shank, so you obviously just need an 1/8” collet.
Question:	Ok will this fit a dremel? One guy says yes and the other says no unless you have an attachment
Answer:	Yes, that's what I used it for.
Question:	will this work to mortise a hinge
Answer:	No.
Question:	Will any of these make a rounded edge from a corner
Answer:	No, they have a guide bearing. If you mount them on a table, you'd have to support the plywood and move it past the bit. Almost impossible to control, IMO. Clamp down a small piece of plywood and route one side. You'll then have the confidence to route the 4x8 sheet. As long as you clamp it down, there is no difference.

Product description

Feature:

1. Made of high quality tungsten steel material, wear resistant and not easy to stick cutter

2. Chamfering at the bottom, high smoothness and high overall precision

3. Fast processing speed, high finish, strong continuous processing is not easy to break

4. Precise edges at the front corners, three-edge geometry for faster cutting

5. Suitable for objects with hardness lower than HRC55

6. The cutter can cut aluminum, copper, aluminum alloy, wood, plastic and rubber products



Specification:

Item Type: Milling CutterMaterial: Cemented Carbide

Center Minimum Cutting Diameter: Approx. 4mm / 0.16in

Blade Diameter: Approx. 6mm / 0.24in

Blade Thickness: Approx. 2mm / 0.08in

Contour Radius: Approx. 2mm / 0.08in

Maximum Depth of Cut: Approx. 3mm / 0.12in

Effective Cutting Edge: 4

Full Length: Approx. 50mm / 2in

Shank Diameter: Approx. 6mm / 0.2in



Package List:

1 x Milling Cutter

• Good Durability Anti-stick Material: This T Slot Cutter End Mill is made of high quality tungsten steel material, wear resistant and not easy to stick cutter
• Offers Smooth and Precise Cutting: Chamfering at the bottom, high smoothness and high overall precision
• High Efficiency Performance: Fast processing speed, high finish, strong continuous processing is not easy to break
• Three-edge Design Provides Faster Working: Precise edges at the front corners, three-edge geometry for faster cutting
• HRC55: Suitable for objects with hardness lower than HRC55

Product description

3/4" Diameter, 3/16" Wide 60° Double Angle Cutter, HSS, Super Tool, 85601, USA Made

• 3/8" Shank Diameter, Standard Weldon Flats on Shank
• 2-3/8" Overall Length
• Tool Diameter Tolerance: +.015"/-0", Corner Radius on tip .010"/.015", Angle Tolerance: +/- 1/4°
• 60° Included Angle
• Right Hand Cut

Product description

The MICRO 100 KC-125-190-035 uncoated, solid carbide, keyseat cutter. Designed and engineered with a solid carbide one piece construction to improve cutting action while minimizing vibration, chip dragging, and recutting as well as improving side wall finishes. Available in both standard and long reach options. Ideally suited for semi-finishing, and universal cutting applications in soft, medium, and hard materials. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Ideal for threading in small diameters. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.