12 best chamfer end mills
Chamfer end mills are cutting tools used in milling machines and CNC machining centers. They are a type of end mill, which is a rotary cutting tool with one or more cutting edges. Chamfer end mills, as the name suggests, are designed primarily for creating chamfers or beveled edges on workpieces. These tools are commonly used in various industrial applications, including metalworking, woodworking, and plastics machining. Here are some key points about chamfer end mills:
Chamfering: The primary purpose of chamfer end mills is to create chamfers or beveled edges on the edges of workpieces. Chamfers serve several purposes, such as improving the appearance of the workpiece, providing a smooth transition between different surfaces, and removing sharp edges that could pose safety hazards.
Design: Chamfer end mills have a conical or tapered shape with cutting flutes on the sides and a pointed tip. The angle of the chamfer and the diameter of the tool can vary, allowing for different chamfer dimensions and angles to be achieved.
Materials: Chamfer end mills are typically made from high-speed steel (HSS), cobalt steel, or solid carbide, depending on the material being machined and the desired performance characteristics. Solid carbide chamfer end mills are known for their durability and longevity.
Applications: These tools are used in a wide range of applications, including metal machining (e.g., deburring and edge preparation), woodworking (e.g., creating decorative edges), and plastics machining (e.g., finishing plastic parts).They are also useful for countersinking holes.
CNC Machining: Chamfer end mills are commonly used in CNC machining processes due to their precision and ability to produce consistent chamfers on multiple workpieces.
Cutting Speeds and Feeds: Achieving the best results with chamfer end mills requires selecting the appropriate cutting speeds and feeds based on the material being machined and the tool's specifications. Proper toolpath programming is crucial for efficiency and quality.
Safety: When using chamfer end mills, operators should follow safety guidelines, including wearing appropriate personal protective equipment (PPE) and securing workpieces properly to prevent accidents.
Tool Maintenance: Regular maintenance, such as cleaning and sharpening, is essential to extend the life of chamfer end mills and maintain their cutting performance.
Chamfer end mills are versatile tools that play a critical role in creating precise and finished edges in various industries. Proper selection, setup, and operation of these tools are essential to achieving high-quality results in machining and milling applications.
Below you can find our editor's choice of the best chamfer end mills on the market
Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes, Chamfer End Mill for Caving V Groove and Sign
SpeTool
Product description
Solid Carbide Chamfer Roatry Drill Bit with 1/4 inch Shank Diameter, 2 inch Overall Length, 90 Degree V-Groove Chamfer End;
4-Flute, Material: HRC55 Carbide with TiAlN Coating;
Unique V Design Maximizes the Tip Strength by Removing the Minimum Amount of Material From the end;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet;
Applicable for Steel, Cast Iron, Hard wood;
- Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
- The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
- 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
- Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
- V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
User questions & answers
| Question: | what is the tip diameter |
| Answer: | It is 1/4'' to 3/8''. Thank you. |
CSLU-Tool 6 Pcs 90 Degree 3 Flute Titanium HSS Chamfer Chamfering Cutter Drill Bits End Mill Countersink
CSLU-Tool
Product description
Features:
Titanium three edge chamfering
It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet,thin iron plate,the insulating board or PVC board
It's very sharp and durable,you use it for a long time
Specifications:
Material:Supersteel 4241
Surface treatment:Titanium-coated
Package Included:
6 X Titanium Three-Edge Chamfering
- Titanium three edge chamfering. It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet, thin iron plate, the insulating board or PVC board
- Material: HSS 4241. Surface treatment: Titanium-coated. Total Length: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
- Specification: head diameter * shank diameter * length 6.3MM: 6.3mm * 5mm * 45mm 8.3MM: 8.3mm * 6mm * 50mm 10.4MM: 10.4mm * 6mm * 50mm 12.4MM: 12.4mm * 8mm * 52mm 16.5MM: 16.5mm * 10mm * 60mm 20.5MM: 20.5mm * 10mm * 65mm
- High precision and low roughness of the machined surface, strong applicability
- Sharp and durable, you can use it for a long time
User questions & answers
| Question: | Are these suitable fot use with dry-wall-screws |
| Answer: | Not USA |
| Question: | Where is this made |
| Answer: | No. These are countersinks, not drills. They are used to cut a 90 degree chamfer at the end of a hole. 90 degree tools like these are usually used to create coutersunk pockets for metric flathhead (countersink) screws. |
| Question: | Is this suitable to drill formica countertop for soap dispenser install |
| Answer: | 90 degrees from one side to the other, and it comes to a point, if it has a radius, it is so insignificant to me for the cut I do. |
SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering
SpeTool
Product description
Solid Carbide Chamfer Roatry Drill Bit with 1/4 inch Shank Diameter, 2 inch Overall Length, 60 Degree V-Groove Chamfer End;
4-Flute, Material: HRC55 Carbide with TiAlN Coating;
Unique V Design Maximizes the Tip Strength by Removing the Minimum Amount of Material From the end;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet;
Applicable for Steel, Cast Iron, Hard wood.
- Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.
- The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
- 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
- Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
- V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
Razor Tool 1/4” Dia 2 Flute 90 Degree Carbide Chamfer Cutter 1/8” LOC 2.5" OAL
Razor Tool
Product description
Solid Carbide chamfering tools are an excellent choice for cutting chamfers and deburring machined edges in manual and CNC applications. 2 Flute design and also be used to spot drill holes in soft materials.
- Premium Micrograin Carbide
- High Surface Quality
- Made In USA
- Great for Deburring in the machine
- Works in all materials
JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Diameter
JERRAY TOOLS
Product description
Type: Chamfering router bits
Brand Name: JERRAY Tools
Material :HRC50 Carbide with coated
Shank Diameter:1/4"(6.35mm)
4Flutes
User questions & answers
| Question: | What overall length of this mill, I need one that is 3” long |
| Answer: | Drywall screws don't require a chamfering tool. Drywall screws will sink to just below flush when tightened properly INTO DRYWALL. Drywall screws are only meant for use securing drywall. They are not meant to be used for attaching wood. If you're screwing wood, then you should be using a proper wood or construction screw. Most wood screws (and machine screws) in the US have an 82 deg. head, so these 90 deg. cutters aren't designed for them. In short, these 90 deg. cutters are designed for METRIC flat head fasteners as metric screws have heads with a 90 deg. angle. |
Bassett - B10026 MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15" Cutting Length, 1/8" Cutting Diameter, 1-1/2" Length (Pack of 1)
Bassett
Product description
Bassett MCH Series double end solid carbide 2 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material.
- Made in the USA
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Bassett
Product description
Greenfield Industries is a leading manufacturer of expendable cutting tools and related products. The company sells thousands of products under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, and Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The product lines include drills, end mills, taps, dies, reamers, countersinks, counterbores, tool bits, and more. These tools are used in a variety of applications, If it's being drilled, cut, bored, dug, shaped, milled, stamped, formed, drawn, or threaded, Greenfield Industries products are hard at work. In 2009, Greenfield Industries became part of the Top-Eastern Group, the world’s largest manufacturer of twist drills. The blending of these two powerhouse companies allows both the global capacity necessary to engage in the world’s cutting tool markets. By combining the benefits of world-class manufacturing facilities, experienced sales and technical support, and well-known and respected brand names, Greenfield Industries delivers a winning combination to the market. As our family of customers, distributors, employees, products and services continues to grow, we maintain our commitment to excellence.
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
User questions & answers
| Question: | Country of origin |
| Answer: | The overall length is 2". The flute length is 0.5" |
SHARS 0.27" 45° Chamfer End Mill Cutter for TPMT 21.51 Insert 404-2869 P[
Shars
- Cutting Diameter: 0.27 - 0.828"
- Shank Size: 0.5"
- Overall Length: 3"
- Number of Flutes: 1
- Insert: TCMT21.51
JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 90 Degree V-Groove Chamfer End, 1/4" Diameter
JERRAY TOOLS
Product description
Type: Chamfering router bits
Brand Name: JERRAY Tools
Material :HRC50 Carbide with coated
Shank Diameter:1/4"(6.35mm)
4Flutes
Degree: 90°
User questions & answers
| Question: | Would this tool work for cutting a shallow(.030 depth) v-groove in titanium |
| Answer: | That is a great question. These are US made. |
45-SD-C12-D3-100L 45 Degree Chamfer indexable Mill Cutter Arbor SDMB26152 Carbide Inserts
CGO
Product description
45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts
- if insert on the cutter: smallest diameter 3mm, biggest diameter: 12mm
- Total length 100mm
- 45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts
- Shank diameter 12mm
- Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert)
Wkstool 6Pcs/Lot,6.3 8 10 12.4 20.5 25mm Blade,90 Degree,Industry Chamfering Chamfer Metal Countersink End Mill Cutter Drill Bit,High Speed Steel,Deburring Tool Set (6.3/8/10/12.4/20.5/25mm, 3Flute)
WKS TOOL
Product description
6Pcs Countersink bits:
A.6.3mm Cutter:Blade Diameter=6.3mm,Shank Diameter=5mm,Overall Length=45mm.
B.8mm Cutter:Blade Diameter=8mm,Shank Diameter=6mn,Overall Length=50mm.
C.10mm Cutter:Blade Diameter=10mm, Shank Diameter=6mm,Overall Length=50mm.
D.12.4mm Cutter:Blade Diameter=12.4mm,Shank Diameter=8mm,Overall Length=56mm
E.20.5mm Cutter:Blade Diameter=20.5mm,Shank Diameter=10mm,Overall Length=63mm
F.25mm Cutter:Blade Diameter=25mm,Shank Diameter=10mm,Overall Length=67mm.
1.The single flut: cutting edges can better chip evacuation, the cutting edges is not easy to blunt,does not vibrate at high speeds for faster cutting than multiple flutes. These countersinks are often used for cutting smaller holes.
Two, Three, or Four Flutes:fine finish face,Each additional flute increases the tool life by distributing the cutting load over more edges. However, fewer flutes provide better chip clearance when machining stringy materials such as plastic.
2.Countersinks cut a cone-shaped opening to install screws and rivets flush with a surface or hold workpieces between centers on a lathe(v bit). They can also be used for chamfering and deburring.
3.90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.
4.Used in hardness 35 ° below the workpiece
- Includes ,6.3 8 10 12.4 20.5 25mm blade diameter cutters,6pcs bits,Material:Uncoated HSS M2AI,Round Handle
- 3Flute chamfering with 90° Countersink Angle on the point for sharp and precise countersinking
- Can be use both at home or industry.Suitable for Aluminum,Brass, Bronze, Iron, Plastic,Stainless,thin iron plate,wood,carbon steel,insulation board,or PVC board etc
- High-precision,Manufactured to exacting tolerances,Full grinded,high abrasion resistance,best obtain accuracy and fine finish.
- 6pc×cutters
45°SSK Indexable Chamfer End Mill Drill Holder with 10Pcs APKT1604 Insert Blades
Balance World Inc
Product description
Specification:
100% brand new with high quality
Aluminum insert: APKT1604
Material: Aluminum Blade
Screws: M4 Wrench: T15
Helix Angle: 45° Helix
Material: Carbide
End Mill Model: SSK C20-20-130
Overall Length: Approx.120mm
Shank Diameter: Approx.20mm
Cutting Diameter: Approx.20mm
Flutes: 1 Flute
Milling with an angle of 45°, and chamfering.
For general milling machine and center.
Package Included:
1 x Indexable Chamfer End Mill
10 x APKT1604 Insert
1 x T15 Wrench
- 100% brand new with high quality
- Aluminum insert: APKT1604
- Material: Aluminum Blade
- Screws: M4 Wrench: T15
- Helix Angle: 45° Helix
Latest Reviews
View all
Christmas Tree Ornament Hooks
- Updated: 06.05.2023
- Read reviews
Buds Key Chains
- Updated: 09.07.2023
- Read reviews
Blow Up Mattresses
- Updated: 06.01.2023
- Read reviews
Stylus Pen For Ipad Surfaces
- Updated: 21.05.2023
- Read reviews
Electric Throw For Adults
- Updated: 27.03.2023
- Read reviews